does a charged particle always moves in uniform circular motion if it's motion is initially perpendicular to the magnetic field.

Answers

Answer 1

Yes, a charged particle will move in uniform circular motion when its motion is initially perpendicular to the magnetic field.

1. When the charged particle enters the magnetic field, it experiences a magnetic force due to the interaction between its charge and the magnetic field.

2. This magnetic force is always perpendicular to both the velocity of the particle and the direction of the magnetic field.

3. Since the magnetic force is always perpendicular to the particle's motion, it causes the particle to change direction, but not speed.

4. As a result, the charged particle follows a circular path, with the magnetic force acting as the centripetal force, keeping it in uniform circular motion.

So, a charged particle with motion initially perpendicular to the magnetic field will indeed move in uniform circular motion due to the magnetic force acting on it.

Learn more about the circular motion here,

https://brainly.com/question/29312275

#SPJ11


Related Questions

Which term describes the amount of pressure each gas in a mixture contributes to the overall gas pressure?

Answers

The term would be partial pressure.

What is the partial pressure of gases?

The partial pressure of a gas refers to the amount of pressure contributed by the gas to the overall pressure of a non-reacting gas mixture.

For example, if a gas is formed from a mixture of two gases A and B. The pressure of the gas would be the sum of the pressure of A and that of B. The pressures that A and B contribute to the overall pressure of the gas are called the partial pressures of A and B respectively.

More on partial pressure can be found here: https://brainly.com/question/13199169

#SPJ1



Tim would like to know the mass of two boxes. Instead of Tim looking at the boxes to determine their mass, what should Tim use to accurately
determine the mass of each box

Answers

Answer:

The triple beam balance

Given the following equation: 2 AgNO3 CaCl2 --> 2 AgCl(s) Ca(NO3)2 What is the net ionic equation:

Answers

The net ionic equation is:

2Ag⁺(aq) + 2Cl⁻(aq) → 2AgCl(s)

How to write a net ionic equation?

The given equation is:

2AgNO₃ (aq) + CaCl₂ (aq) → 2AgCl(s) + Ca(NO₃)₂ (aq)

A double displacement reaction occurs when silver nitrate and calcium chloride are combined. Silver chloride precipitate and a calcium nitrate solution are the results of the reaction.

Break down all the soluble electrolytes, that are present in an aqueous form, into their respective ions:

2Ag⁺(aq) + 2NO³⁻(aq) + Ca²⁺(aq) + 2Cl⁻(aq) → 2AgCl(s) + Ca²⁺(aq)+ 2NO³⁻(aq)

Now remove all the spectator ions present in the equation. The spectator ions should be removed after comparing the reactant and product sides of the revised reaction. These dissolved ions are known as spectator ions if they exhibit the same form on both sides. No reaction occurs if everyone is a spectator ion.

Now write the net ionic equation:

2Ag⁺(aq) + 2Cl⁻(aq) → 2AgCl(s)

Learn more about ionic equations here:

https://brainly.com/question/1601524

#SPJ4

A 5.2 molal aqueous solution of methyl alcohol, CH3OH, is supplied. What is the mole fraction of methyl alcohol in the solution?​

Answers

Answer:

0.086

Explanation:

A 5.2 molal aqueous solution of methyl alcohol indicates that 5.2 moles of methyl alcohol are present in 1 kilogram (or 1000 g) of water. Water has a molecular weight of 18 g/mol.

(100g)/18g/mol=55.56 mol

5.2 mol/(5.2mol+55.56 mol)=0.086

How does a conjugate acid differ from its conjugate base?

Answers

The conjugate acid is differ from its conjugate base as, conjugate acid is formed by strong base whereas conjugate base is formed by strong acid.

conjugate base is differ from conjugate acids by the presence of the proton. The conjugate acid is formed when proton is added to the bases whereas conjugate bases is formed when proton is released by the acids.

Example of corrugate acids are given below.

[tex]NH_{3}[/tex] → [tex]NH_{2} ^{-} +H^{+}[/tex]

In the above example  [tex]NH_{2} ^{-}[/tex] is conjugate acids.

Learn about conjugate acid

https://brainly.com/question/12883745

#SPJ4

To a 25.00 mL volumetric flask, a lab technician adds a 0.225 g sample of a weak monoprotic acid, HA , and dilutes to the mark with distilled water. The technician then titrates this weak acid solution with 0.0849 M KOH . She reaches the endpoint after adding 42.35 mL of the KOH solution. Determine the number of moles of the weak acid in the solution.

Answers

The number of moles of the weak acid in the solution is 0.00359

Calculation:

1. The number of mole of KOH in the solution:

Given:

Molarity of KOH = 0.0849 M

Volume = 42.35 mL = 42.35 / 1000 = 0.04235 L

Mole of KOH = Mole = Molarity x Volume

                      = 0.0849 ×  0.04235

                      = 0.00359 mole

2. The number of mole of a weak acid, HA:  

Balanced equation:

HA + KOH → KA + H₂O

From the above equation, A mole of HA and a mole of KOH react together. Therefore,

0.00359 moles of HA will also react with 0.00359 moles of KOH.

0.00359  moles of base use = 1/1 x 0.00359 = 0.00359 moles of HA

Thus, there are 0.00359 moles of a weak acid in the solution.

Learn more about the moles of the weak acid here,

https://brainly.com/question/23087833

#SPJ4

Please help! Is there another way that 3.40x10^-19J can be imputed on a computer. I have the right answer but it is wrong.

An element emits light at a wavelength of 584 nm. What is the energy of the photon with that wavelength?

Write your answer in scientific notation with the appropriate significant figures and unit. The exponent of 10 is written with the carat (^) symbol, so 10^n.

Answers

The energy of the photon with the wavelength of 584 nm is 3.4×10¯¹⁹ J

How to determine the frequency of the photonWavelength (λ) = 584 nm = 584×10⁻⁹ mSpeed of light (v) = 3×10⁸ m/sFrequency (f) = ?

f = v / λ

f = 3×10⁸ / 584×10⁻⁹

f = 5.14×10¹⁴ Hz

How to determine the energyPlanck's constant (h) = 6.626×10¯³⁴ JsFrequency (f) = 5.14×10¹⁴ HzEnergy (E) =?

E = hf

E = 6.626×10¯³⁴ × 5.14×10¹⁴ Hz

E = 3.4×10¯¹⁹ J

Learn more about energy:

https://brainly.com/question/10703928

#SPJ1

Given the reaction below, which is the being oxidized?
Mg + Cl2 Right arrow. Mg2+ + 2Cl–
2CI–
CI2
Mg
Mg2

Answers

The ion that is oxidized in the above redox reaction is Mg (option A). Details about oxidation can be found below.

What is oxidation in a redox reaction?

Oxidation in a redox reaction is a reaction in which the atoms of an element lose electrons and the oxidation state of the element increases.

According to this question, the redox reaction is given as follows: Mg + Cl2 = Mg2+ + 2Cl–

As shown in the above redox reaction, Magnesium oxidation number increases from 0 to 2+, therefore, is the one being oxidized.

Learn more about oxidation at: https://brainly.com/question/9496279

#SPJ1

AnswerAAAAA

Explanation:

an iron weighing 50 grams absorbs 256.0 J of heat and warms by 11.4C What is the specific heat of the iron can

Answers

The specific heat of the iron can is determined as 0.449 J/g⁰C.

Specific heat of the iron can

The specific heat of the iron can is calculated as follows;

Q = mcΔθ

c = Q/mΔθ

where;

Q is quantity of heatΔθ is change in temperaturem is mass

c = 256/(50 x 11.4)

c = 0.449 J/g⁰C

Thus, the specific heat of the iron can is determined as 0.449 J/g⁰C.

Learn more about specific heat here: https://brainly.com/question/16559442

#SPJ1

The volume of a gas decreases to half of its original volume, but the gas maintains the same number of moles and temperature. According to the ideal gas law, what will most likely happen to the pressure?

It will double.
It will decrease.
It will increase slightly.
It will remain the same

Answers

A. when the volume of the gas is halved, the pressure of the gas will be doubled.

Pressure of the gas according to ideal gas law

PV = nRT

P = nRT/V

when the volume is halved

P= nRT/0.5V

P = 2nRT/V

P(new) = 2P(initial)

Thus, when the volume of the gas is halved, the pressure of the gas will be doubled.

Learn more about ideal gas law here: https://brainly.com/question/12873752

#SPJ1

In 1869, mendeleev created a periodic table in which elements were ordered by weight and placed in groups based on their chemical properties. mendeleev's decision to design the periodic table in this way allowed immediate advances in chemistry by.?
a.) providing an explanation for the reactive properties of the alkali metals
b.) providing a framework for models of electron configurations
c.) predicting the existence of a group of undiscovered inert gases
d.) predicting the properties of undiscovered elements in specific atomic weight ranges.
please explain

Answers

Answer:

D

Explanation:

Mendeleev periodic table predicted the properties of undiscovered element like the eka-aluminium.

Board cases involving eligibility or disciplinary issues that are resolved through a board agreed order

Answers

Board instances involving eligibility or disciplinary issues that are addressed by a board-approved order public records and accessible on the BON's web page.

BON's web page

Board Position Statements are a way to give nurses guidance on topics that are important to the Board and relate to the safety of the public, but they do not have the legal force of law. In the context of the position statement's overall intent, each position statement is intended to offer direction. Board position statements are examined every year to determine their applicability and accuracy in light of current practice, the Nursing Practice Act, and Board regulations. In January 2022, the Board conducted its most recent evaluation.

It is possible to find a concise summary of the substance of the Position Statements, although it does not include all the specifics that are included in each Position Statement.

Learn more about BON's web page here:

https://brainly.com/question/16982080

#SPJ1

The iron atoms in the prosthetic groups of the electron transport chain proteins can easily accept and release ____

Answers

The iron atoms in the prosthetic groups of the electron transport chain proteins can easily accept and release electrons

A helper molecule, or prosthetic group, is a nonproteinaceous substance that aids in the activity of an enzyme. A particular type of cofactor molecule, or organic molecule, known as a coenzyme, aids enzymes in catalyzing chemical reactions.

a prosthetic group made comprised of a protoporphyrin ring and an iron (Fe) atom in the middle. Four pyrrole rings joined by methene bridges form a protoporphyrin ring.

Through their involvement in cellular respiration and fatty acid production, prosthetic groups support cellular activity. Holoproteins are the name for prosthetic groups that are attached to proteins. Prosthetic groups include, among others, heme, biotin, flavin, iron sulfides, copper, and ubiquinone.

To learn more about the prosthetic group please visit-
https://brainly.com/question/5679226
#SPJ4

Which describes the law of conservation of matter?
O A. Chemical reactions cannot happen.
B. Atoms cannot be created or destroyed in a reaction.
OC. Atoms are not involved in chemical reactions.
OD. Molecules cannot change into other molecules during a reaction.
SUBMIT

Answers

Answer:

answer is B

mark me brainliest

follow

Please help!
how many moles of oxygen react
with 2.25 mol of nitrogen?
n2(g) +
o2(g)
no(g)

Answers

Answer: 2.25

Explanation: 1:1 mole ratio seen in equation.

How much energy does cameron need to add to raise the temperature of a 0.500-kg sample of silver from 200 k to 205 k? the specific heat of silver is 236 j/kgk

Answers

energy to raise temperature is 590 J

Given:

mass of silver sample = 0.5 kg

initial temperature = 200 k

final temperature = 205 k

specific heat of silver = 236 j/kgk

To Find:

energy to raise temperature

Solution: The heat energy required to raise the temperature of of a substance through is called its specific heat capacity.

Q = cmΔt

where c= constant of proportionality, called specific heat capacity of the body

Q = mass x specific heat x ∆t

= 0.5 x 236 x ( 205-200 )

= 590 J

So, energy to raise temperature is 590 J

Learn more about Specific heat capacity here:

https://brainly.com/question/16559442

#SPJ4

What effects doing adding a solute have on the freezing point of the freezing point of a solution

Answers

Answer:

Lowers the freezing point

Explanation:

Lowers the freezing temp

"Freezing point depression is a colligative property observed in solutions that results from the introduction of solute molecules to a solvent. The freezing points of solutions are all lower than that of the pure solvent and is directly proportional to the molality of the solute."

Answer: The temperature at which the solution freezes is lowered

Explanation:

If an object has a temperature of 0 kelvin, how much energy is the object emitting? what is the wavelength of light emission according to wien's law?

Answers

This law (expressed mathematically as E = σT4) states that each gadget with temperatures above absolute zero (0K or -273°C or -459°F) emits radiation at a charge proportional to the fourth energy in their absolute temperature.

Wien's displacement law states that the black body radiation curve for one-of-a-kind temperatures height at a wavelength is inversely proportional to temperature.

Wien's displacement law It states that the better the temperature, the lower the wavelength λmax for which the radiation curve reaches its most. The shift to shorter wavelengths corresponds to photons of better energies. In other phrases, λmax (height wavelength) is inversely proportional to temperature.

Wien's regulation, named after the German Physicist Wilhelm Wien, tells us that gadgets of different temperatures emit spectra that height at distinctive wavelengths. hotter objects emit radiations of shorter wavelengths and for this reason, they seem blue.

Wien's regulation tells us that gadgets of various temperatures emit spectra that top at specific wavelengths. hotter gadgets emit a maximum of their radiation at shorter wavelengths; subsequently, they will seem like bluer. Cooler gadgets emit most of their radiation at longer wavelengths; consequently, they'll appear redder.

Learn more about Wien's law here: https://brainly.com/question/13380837

#SPJ4

The formation constant for the reaction ag (aq) 2nh3(aq) ag(nh3)2 (aq) is kf = 1.7 × 107 at 25°c. what is δg° at this temperature? (r = 8.314 j/k• mol)?

Answers

The value of ΔG° at this temperature is -18034.18 J/mol

Calculation,

Given information

formation constant (Kf)= 1.7 × [tex]10^{7}[/tex]

Universal gas constant (R) = 8.314 J/K• mol

Temperature = 25° C = 25 °C + 273 = 300 K

Formula used:

ΔG° = -RT㏑Kf

By putting the valur of R,T, Kf we get the value of ΔG°

ΔG° = - 8.314 J/K• mol×300K㏑ 1.7 × [tex]10^{7}[/tex]

ΔG° = -2494.2㏑ 1.7 × [tex]10^{7}[/tex] = -18034.18 J/mol

So, change in standard Gibbs's free energy is -18034.18 J/mol

Learn about formation constant

https://brainly.com/question/14011682

#SPJ4

What is the total number of electron domains around the central atom for a molecule having a trigonal pyramidal molecular geometry, such as nh3?

Answers

The total number of electron domains in molecules having trigonal pyramidal molecular geometry is four (4). It contains three bonding and one nonbonding pair.

Ammonia has an sp3 hybridization and stable binary hydride. And it has an electron geometry of tetrahedral. Its bond angle is 107 degrees.

If all are bonded pairs then the geometry is tetrahedral but if there is one lone pair of electrons & 3 bond pairs then the geometry is trigonal pyramidal.

The ammonia molecule has 3 hydrogen atoms and an unshared pair of electrons connected to the nitrogen atom that's why its shape is trigonal pyramidal.

Learn more about molecular geometry: https://brainly.com/question/18448469

#SPJ4

Use the portion of the periodic table shown below to answer the questions.

A portion of the first three columns of the periodic table is shown. Column one from top to bottom reads 11 sodium 22.990, 19 potassium 39.098, and 37 rubidium 85.468. Column two reads 12 magnesium 24.305, 20 calcium 40.078, and 38 strontium 87.62. Column three reads 21 scandium 44.956 and 39 yttrium 88.906.

Part 1: Name two elements that have the same properties as sodium (Na). (4 points)
Part 2: Determine the number of protons, electrons, and neutrons present in an atom of calcium (Ca). Explain how you determined your answer using complete sentences. (6 points)

Answers

The two elements that have the same properties as sodium are potassium  and rubidium .

What is periodic table?

The periodic table is an arrangement of the elements in order of increasing atomic number.

From the list, the two elements that have the same properties as sodium are potassium  and rubidium .

Proton has an atomic number of 20 and a mass number of 40. The number of electrons is the same as the number of protons. Given that the atomic number is the number of protons present, we have 20 electrons and 20 protons.

Number of neutrons = Mass number  - Number of protons

= 40 - 20 = 20 neutrons

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

A gas diffuses 1/8 times faster than hydrogen gas. what is the molar mass of the gas?
129.02 g/mol
136.44 g/mol
140.81 g/mol
145.45 g/mol

Answers

Answer:

129.02 g/mol.

Explanation:

We apply grahams law of diffusion:

1/8 = √2.016/√m     where m = molar mass

√m  = 8√2.016

m =   (8√2.016) = 129.02 g/mol.

4- The equilibrium constant for the reaction A (g) B (g) is 10. A reaction mixture initially contains [A]

Answers

The initial concentration in the reaction mixture will contain [A] = 0.1 M and [B] = 1.0 M

Below is the reaction

A(g) → B(g)

And the equilibium constant will be explained in terms of [A] and [B]:

Keq = 10 = [B]/[A]

If the first conditions are that [A] = 1.1 M and [B] = 0.0 M, the conditions at equilibrium is:

[A] = 1.1M - x

[B] = 0.0M + x

Now we rewrite Keq:

Keq = 10 = [0.0 +x] / [1.1 -x]

at the end we got it  for x:

10 = [0.0 +x] / [1.1 -x]

10 * (1.1-x) = x

11 - 10x = x

11 = 11x

x = 1

equilibrium, the concentrations are:

[A] = 1.1 M - 1 = 0.1 M

[B] = 0.0 M + 1 = 1.0 M

Thus, the concentration of A is 0.1 M and the concentration of B is 1M.

learn more about concentration :

https://brainly.com/question/2728613

#SPJ4

If the symbol x represents a central atom, y represents outer atoms, and z represents lone pairs on the central atom, the structure the central x atom is single bonded to two y atoms, which are 180 degrees apart. The x atom has two lone pairs. Could be abbreviated as xy2z2. Classify each molecule according to its shape.

Answers

XY2Z - linear

XY2Z2 - bent(120)

XY2Z3 - bent(109)

XY3Z -  trigonal pyramidal

XY3Z2 - t-shaped

XY4Z -  see-saw

XY4Z2 - square planar

XY5Z - square pyramidal

Linear shape: A linear molecule is one that has its atoms arranged in a straight line.

Bent shape: One type of bent molecular geometry features a center atom with two lone pairs of electrons and two bond pairs attached to it. Other names for it include angular and V-shaped.

Trigonal pyramidal: A trigonal pyramid is a molecular shape that resembles a tetrahedron and has one atom at the top and three at the corners of the base.

T-Shaped: When a central atom has three ligands, the structure of the molecule is said to have a T-shaped molecular geometry.

See-saw: This shape is caused by a lone pair of electrons on the central atom.

Square planar: In square planar molecular geometry, constituent atoms create the square's four corners on the same plane and surround the center atom.

To learn more about atomic structures visit: https://brainly.com/question/2153108

#SPJ4

An increase in __________ will directly stimulate the peripheral chemoreceptors to increase ventilation.

Answers

An increase in pH will directly stimulate the peripheral chemoreceptors to increase ventilation.

Chemoreceptor can be stimulated by change in the chemical composition of their immediate environment .There are many types of chemoreceptor spread throughout the body which help to control different process including taste, smell and breathing. An increase in body temperature increases the rate from peripheral chemoreceptor neurons.

The chemoreceptor is also known as chemosensor. The chemoreceptor is a specialized sensory receptor which transduces a chemical substance ( endogenous or induced ) to generate a biological signal. The two types of chemoreceptor is peripheral and central.

learn more about pH

https://brainly.com/question/15289741

#SPJ4

A 25. 00 ml sample of acetic acid containing phenolphthalein indicator is titrated with 0. 1067 m naoh. The solution changes color after 30. 07 ml naoh has been added. What is the concentration of the acetic acid before titration?.

Answers

The concentration of acetic acid:

The concentration of the acetic acid before titration is 0.128 M

What is titration?

Titration is a quantitative analytical procedure that works by allowing a known analyte to gradually react with a titrant until an endpoint is reached.

Titration for weak acid and strong base:

Moles of acetic acid =  moles of NaOH

Given:

Concentration of NaOH = 0.1067 M

Volume of NaOH = 30.07 ml = 0.03007 L

Calculation:

So, by using the formula, Concentration = Moles/Volume

Moles of NaOH = concentration x volume = 0.1067 x 0.03007 = 0.0032

Therefore, the moles of acetic acid  = 0.0032 mole

Now, using the formula again for determining the concentration of acetic acid, we get,

Concentration = Moles/Volume

Concentration of acetic acid =  0.0032/0.025 = 0.128M

Learn more about titration here,

https://brainly.com/question/2728613

#SPJ4

In terms of the kinetic molecular theory, in what ways are liquids similar to solids? in what ways are liquids different from solids?

Answers

Answer:

particles in liquids have greater kinetic energy than particles in solids

Why is it difficult to see whether you have added the phenolphthalein to the flask solution before you have titrated it? ​

Answers

Whether in an alkali (pink) or an acid (colorless) solution, the phenolphthalein indicator has one of two distinct structures. Both structures are light-absorbing in the ultraviolet spectrum, which the human eye cannot see. So it is challenging.

What is phenolphthalein? The phthalein family of chemical compounds includes the indicator phenolphthalein (C20H14O4). The powder is a thin, crystalline yellowish-white to light orange powder. It has a pKa of 9.3, is barely soluble in water, and, when dissolved in alcohol, is used as an indicator for acid-base titration investigations.It is colorless in liquid form until pH 8.5 when it transforms from pink to dark red. Adolf von Baeyer, a German chemist, created phenolphthalein in 1871. He produced it by fusing phenol and phthalic anhydride in the presence of sulfuric acid (H2SO4) or zinc chloride. Phenolphthalein is closely linked to the triphenylmethane dyes (ZnCl2). The abbreviation "HIn" or "php" in shorthand notation is frequently used to refer to the chemical compound phenolphthalein, which has the formula C20H14O4. Its structure consists of 2 alcoholic groups, one ketone group, three hexagonal structures, and one pentagonal structure. Another compound with carbon, hydrogen, and oxygen chain structure is phenolphthalein.Phenolphthalein is frequently used as an indicator in acid-base titrations. Due to its water solubility, phenolphthalein is frequently dissolved in alcohols before use in experiments. It is a weak acid that can lose H+ ions in solutions. While the ion of phenolphthalein is purple, the phenolphthalein molecule is colorless.A common indicator used in titration experiments to show the titration's endpoint is phenolphthalein, an inert, colorless acid. Since this molecule dissociates to generate pink anions when dissolved in water, the endpoint is signaled by the production of pink color.

To learn more about phenolphthalein, refer to:

https://brainly.com/question/23732406

#SPJ9

A solution is prepared by dissolving 117 grams of salt (NaCI) in 250 milliliters of water (H_{2}*O) What is the molarity of the solution?

D. 468 M NaCI

C. 8.0 M NaCl

A. 0.47 M NaCI

B. 8 * 10 ^ - 3 * MNaCl

Answers

Taking into account the definition of molarity, the molarity on the solution is 8 M.

Definition of molarity

Molar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:

[tex]Molarity=\frac{number of moles}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{L}[/tex].

This case

In this case, you know that:

number of moles= 117 gramsx[tex]\frac{1 mole}{58.45 grams}[/tex]=  2 moles, where 58.45[tex]\frac{g}{mole}[/tex] is the molar mass of NaCl.volume= 250 mL= 0.250 L (being 1000 mL= 1 L)

Replacing in the definition of molarity:

[tex]Molarity=\frac{2 moles}{0.250 L}[/tex]

Solving:

Molarity= 8 [tex]\frac{moles}{L}[/tex]= 8 M

Finally, the molarity on the solution is 8 M.

Learn more about molarity:

brainly.com/question/9324116

brainly.com/question/10608366

brainly.com/question/7429224

#SPJ1

Write a mechanism for the formation of triphenylmethanol from the reaction of phenylmagnesium bromide and diethyl carbonate..

Answers

Nucleophilic acyl substitution reaction is the mechanism for the formation of triphenylmethanol from the reaction of phenylmagnesium bromide and diethyl carbonate.

Phenyl magnesium bromide substitutes one ethoxide ion in the nucleophilic acyl substitution reaction that drives the process forward. A subsequent equivalent of phenyl magnesium bromide produces triphenyl methanol through a nucleophilic addition reaction with the resultant keto group.

There are two ethoxy leaving groups in diethyl carbonate. Tertiary alcohol is created when diethyl carbonate combines with too much Grignard reagent. The Grignard reagent attacks the carbonyl carbon three times in the mechanism to produce the tertiary alcohol.

Therefore, Nucleophilic acyl substitution reaction is the mechanism for the formation of triphenylmethanol from the reaction of phenylmagnesium bromide and diethyl carbonate.

Refer to the image below for a better understanding of the mechanism;

Learn more about phenylmagnesium bromide here;

https://brainly.com/question/9543435

#SPJ4

Other Questions
DataSpan, Inc., automated its plant at the start of the current year and installed a flexible manufacturing system. The company is also evaluating its suppliers and moving toward Lean Production. Many adjustment problems have been encountered, including problems relating to performance measurement. After much study, the company has decided to use the performance measures below, and it has gathered data relating to these measures for the first four months of operations.Month1234Throughput time (days)????Delivery cycle time (days)????Manufacturing cycle efficiency (MCE)????Percentage of on-time deliveries90%84%81%78%Total sales (units)2410230721892106Management has asked for your help in computing throughput time, delivery cycle time, and MCE. The following average times have been logged over the last four months:Average per Month (in days)1234Move time per unit0.90.50.60.6Process time per unit3.63.43.23.0Wait time per order before start of production18.019.723.024.8Queue time per unit4.75.56.47.4Inspection time per unit0.60.80.80.6Required:1-a. Compute the throughput time for each month.1-b. Compute the delivery cycle time for each month.1-c. Compute the manufacturing cycle efficiency (MCE) for each month.2. Evaluate the companys performance over the last four months.3-a. Refer to the move time, process time, and so forth, given for month 4. Assume that in month 5 the move time, process time, and so forth, are the same as in month 4, except that through the use of Lean Production the company is able to completely eliminate the queue time during production. Compute the new throughput time and MCE.3-b. Refer to the move time, process time, and so forth, given for month 4. Assume in month 6 that the move time, process time, and so forth, are again the same as in month 4, except that the company is able to completely eliminate both the queue time during production and the inspection time. Compute the new throughput time and MCE. a patient is taken to surgery for removal of a squamous cell carcinoma of the right thigh. what is the correct diagnosis code for todays procedure? A tunnel opens at 7am and on average 27 red trucks enter this tunnel from 7am to 10am on Monday mornings. Suppose the red trucks arrive independent of each other and at a constant rate. (a) (1 point) Let X be the number of red trucks that pass through the tunnel between 7am and 10am over the next Monday. What is the distribution of X? (b) (2 points) Again let X be the number of red trucks that pass through the tunnel between 7am and 10am next Monday. How many red trucks would you expect to pass through the tunnel between 7am and 10am next Monday? (c) (5 points) What is the probability that 8 red trucks pass through the tunnel between 8am and Sam? State the appropriate distribution and any parameter values for any random variable(s) you use to model the situation. Write the probability statement and show your work in order to solve the problem. (d) (4 points) Suppose it takes a half hour for a red truck to pass through the tunnel. If there are no red trucks in the tunnel when it enters the tunnel at 7:35am on a Monday, what is the probability it will be the only red truck in the tunnel the whole time it spends in the tunnel? State the appropriate distribution and any parameter values for any random variable(s) you use to model the situation. Write the probability statment and show your work to receive full credit. (e) (5 points) Let W represent the amount of time in hours it takes for the g red truck to arrive at the tunnel on Monday morning. What time do you expect the red truck to arrive at the Tunnel on Mondny morning to the nearest 10 minutes)? Recall the tunnel opens at 7 am. Your final answer should be a time. part 1: if the rate of the forward reaction is 67.8 m/s, with a concentration of 11 m courage and 18.3 m strenth, then what is the rate constant of the forward reaction? the global nitrogen cycle is dominated by the _____________________ phase.a. sedimentary b. gaseous c. oceanic d. secondary Which of the following represents the number of possible gametes produced from a genotype of RrBBCcDDEe? A. 2. B. 4. C. 8. D. 16. E. 32. use a maclaurin series in this table to obtain the maclaurin series for the given function. f(x) = x2 ln(1 x3) A simple batch still (one equilibrium stage) is separating a 50 mole feed charge to the still pot that is 80. 0 mol% methanol and 20. 0 mol% water. An average distillate concentration of 88. 6 mol% methanol is required. Find the amount of distillate collected, the amount of material left in the still pot, and the concentration of the material in the still pot. Pressure is 1 atm which of the following generally defines a person with sufficient skill, knowledge, or experience in a given field to draw inferences or reach conclusions? if the temperature of a star doubles and all other properties remain constant, how does its spectrum and flux change? The marine food chain begins with plankton, which are prey to other creatures such as ________, "the power food of the Antarctic."A)krillB)benthosC)shrimpD)crabs there were two alliance systems that existed in the years before world war i. identify the alliances and list the countries included in each alliance. identify the nuclide produced when phosphorus-32 decays by beta emission: 3215p 01e ? (5x+....)^(2)=....*x^(2)+70xy+ .... fill in the missing parts If a brand manager wanted to use Linkedin to promote his or her brand, the best option would be?A. try to accumulate online followers" for the business. B. monitor profiles for negative mentions of the brand. C. create a profile for the brand with a fictional "typical brand user. D. join groups of industry professionals to demonstrate the organization's capabilities in particular areas. E. request to be linked with potentially lucrative customers. Which of the following is a common pitfall that effective change agents should avoid? do not fear failure personality conflicts well-structured plans O great communication skills foster trust A sample of nitrogen occupies 11.2 liters un- der a pressure of 580 torr at 32C. What vol- ume would it occupy at 32C if the pressure were increased to 8 10 torr? Answer in units of I.. Which two of the following people might be enlisted to design the cover page of a formal report? -graphic designer -public relations professional. Based on past research about explicit and implicit memory, which of the following patterns would you MOST expect to find?A) In a lexical-decision task, people are quicker to decide if a string of letters is an English word when they have not seen that letter string recently.B) In a word-stem-completion task, people are more likely to produce a word they have recently seen, even if they do not remember seeing it, than an equally plausible word they have not seen recently.C) In a tachistoscopic-recognition task, people are likely to have good recall but poor recognition of a word when they are tested afterward.D) In word-fragment-completion tasks, people are more likely to come up with word endings that they have previously seen, but only if they have a conscious memory of the word. the intensity of a sound wave emitted by a portable generator is 5.90 w/m2. what is the sound level (in db)?