ΔLMN ≅ ΔRST, ∠L = 49º, ∠M = 10x, ∠S = 70º, and ∠T = 4y + 9.

In the JK Flip-Flop truth table, when both inputs of the JK Flip-Flop are set to 1 and the clock input is also set to "High," the circuit is toggled from the SET to the RESET state.

Similar in operation to the SR flip flop is the JK flip flop. The JK flip flop is marked with the letters "J" and "K" rather than "S" and "R." When both inputs are set to 1, SR flip flips yield incorrect states as outputs, while JK flip flops do not, even when both "J" and "K" flip flops are set to 1. The only distinction between JK and SR flip flops is this. The JK Flip Flop is an additional clock input circuitry-equipped gated SR flip-flop. The presence of a clock input circuit prevents the invalid or unlawful output situation from occurring when both inputs are set to 1. The JK flip-flop hence has four input combinations that are possible: 1, 0, "no change," "toggle," and With the exception of the clock input, the JK flip flop's symbol is identical to that of the SR bistable latch.

Learn more about JK flip-flop and its truth table:

https://brainly.com/question/30639400

#SPJ4

The airplane has traveled a ground distance of 2900 ft when it has attained an altitude of 2400 ft at an angle of 40 degrees with the ground.

The ground distance that the airplane has traveled can be found using the trigonometric function of tangent. The tangent of an angle is the ratio of the opposite side to the adjacent side in a right triangle. In this case, the opposite side is the altitude (2400 ft) and the adjacent side is the ground distance we are trying to find.

We can use the formula:

tan(angle) = opposite/adjacent

Plugging in the given values:

tan(40) = 2400/adjacent

Solving for the adjacent side (ground distance):

adjacent = 2400/tan(40)

Using a calculator, we can find the value of tan(40) and then divide 2400 by that value to get the ground distance:

adjacent = 2400/0.8391

adjacent = 2860.67 ft

Rounding to the nearest 100 ft, the ground distance is 2900 ft.

Therefore, the airplane has traveled a ground distance of 2900 ft when it has attained an altitude of 2400 ft at an angle of 40 degrees with the ground.

Learn more about ground distance at https://brainly.com/question/13613243

#SPJ11

The value of r is equal to 18.

Mathematically, a proportional relationship or direct variation can be represented by the following equation:

y = kx

Where:

Based on the information provided, we have the following:

r ∝ m²/t

r = km²/t

In order to have a proportional relationship and equivalent ratios, the variables r, m, and t must have the same constant of proportionality:

Constant of proportionality (k) = tr/m²

Constant of proportionality (k) = (2 × 32)/8²

Constant of proportionality (k) = 1.

For the value of r, we have:

r = km²/t

r = 6²/2

r = 18.

Read more on proportionality here: brainly.com/question/12866878

#SPJ1

Answer:

x=10

Step-by-step explanation:

If we subtract 2 from 52 we get 50 and ten mutiplys into 50.

Answer: [tex](0.2,2)[/tex]

Step-by-step explanation:

[tex]-5x-y=-3[/tex]

add y on both side of the equation

[tex]-5x=y-3[/tex]

add 3 on both side of the equation

[tex]y=-5x+3[/tex]

Then insert [tex]-5x+3[/tex] as y in the equation [tex]y =5x+1[/tex]

[tex]5x+1=-5x+3[/tex]

add 5x on both side of the equation

[tex]10x+1=3[/tex]

minus 1 on both side of the equation

[tex]10x=2[/tex]

divide by 10 on both side of the equation

[tex]x=0.2[/tex]

That is how you get x

To get y, you would sub 0.2 for x in the equation [tex]y=5x+1[/tex] or[tex]-5x-y=-3[/tex], I prefer the first equation

[tex]y=5x+1[/tex]

sub 0.2 for x

[tex]y=5(0.2)+1[/tex]

multiply 5 by 0.2

[tex]y=1+1[/tex]

add them up

[tex]y=2[/tex]

and there you go for y

The solution would be in a [tex](x,y)[/tex] form. So, [tex](0.2, 2)[/tex] would be our answer.

By using the "disp" function, we can show the value of a variable on the screen.

With MATLAB's "disp" function, you can show the value of a variable on the screen. The "disp" function prints the variable's or expression's value as text on the screen. The syntax for employing the "disp" function is as follows: CSS copy code displayed (variable)

The variable that you want to display is called "variable" in this case. MATLAB will show the value of the variable in the Command Window when the "disp" function is called with the variable as an argument.

Assume, for instance, that you've created the variable "x" and given it the value of 5. The following code can be used to show the value of "x": scss Coding example: x = 5; disp(x); When this code is executed, MATLAB will show that.

Learn more about function here:

https://brainly.com/question/12431044

#SPJ4

The solutions of the equation as ordered pairs is:

(1, 18), (2, 31), (3, 44), (4, 57)

In order to use the x-values: 1, 2, 3, and 4 to write solutions of the equation y = 13x + 5 as ordered pairs, substitute the values of x into the equation and calculate y. That is:

when x = 1:

y = 13(1) + 5 = 18

when x = 2:

y = 13(2) + 5 = 31

when x = 3:

y = 13(3) + 5 = 44

when x = 4:

y = 13(4) + 5 = 57

Learn more about equations on:

https://brainly.com/question/22688504

#SPJ1

The extended proportion that can be used to show such a similarity is:

KM/ FG = KL/ FH = ML/ GH

Two or more triangles are said to have similar relations if on comparing their corresponding sides and measure of angles, there exist some common relations among them. Similarity of triangles can be expressed by some common terms in relation to their sides and angles.

In the given question, it has been stated that the triangles are similar using Side-Side-Side similarity theorem. Thus on comparison, the extended proportion that can be used to show such a similarity is:

KM/ FG = KL/ FH = ML/ GH

Learn more about similar triangles at https://brainly.com/question/27996834

#SPJ1

Solving the provided question we can say that by Pythagorean theorem the ambulance from the front door of her apartment building is  [tex]YT^2 = -252[/tex] .

The Pythagorean Theorem, often known as the Pythagorean Theorem, is the fundamental Euclidean geometry relationship between the three sides of a right triangle. The area of a square with the hypotenuse side equals the sum of the areas of squares with the other two sides, according to this rule. The Pythagorean Theorem says that the square that spans a right triangle's hypotenuse opposite the right angle equals the sum of the squares that span its sides. It is sometimes written as the general algebraic notation a2 + b2 = c2.

Since XY is tangent to circle O at T, we know that angle OYT is a right angle.

Using the Pythagorean theorem in triangle OYT

[tex]YT^2 = OT^2 - OY^2 \\YT^2 = 18^2 - 24^2\\YT^2 = 324 - 576\\YT^2 = -252[/tex]

To know more about Pythagorean theorem visit:

https://brainly.com/question/14930619

#SPJ1

Answer:

To show that (x-3) is a factor of the polynomial h(x) = f(x) - f(3), we need to use the definition of a polynomial factor. A polynomial factor is a polynomial that, when multiplied by another polynomial, results in the original polynomial.

First, let's evaluate f(3) to find the value of h(3).

h(3) = f(3) - f(3) = 0

Now let's examine the value of h(x) for any x other than 3.

h(x) = f(x) - f(3)

If (x-3) is a factor of h(x), then for any value of x other than 3, h(x) should be equal to zero.

So,

h(x) = (x-3)g(x)

where g(x) is another polynomial.

Therefore, by definition, (x-3) is a factor of h(x) = f(x) - f(3).

The mean is 11.25 and median is 8, and from the employees' perspective, the median would be a better measure of central tendency to use for determining the raise cut-off point.

{1, 4, 5, 6, 7, 9, 9, 11, 15, 18, 27, 32}

The mean is the average value of the dataset. We can find the mean by summing up all the values and dividing by the total number of values:

mean = (1 + 4 + 5 + 6 + 7 + 9 + 9 + 11 + 15 + 18 + 27 + 32) / 12

= 135 / 12

= 11.25

Therefore, the mean of the dataset is 11.25.

The median is the middle value in the dataset. If the dataset has an odd number of values, the median is the middle value. If the dataset has an even number of values, the median is the average of the two middle values.

In this case, the dataset has 12 values, so we need to find the average of the 6th and 7th values:

median = (7 + 9) / 2

= 8

Therefore, the median of the dataset is 8.

From the employees' perspective, the median would be a better measure of central tendency to use for determining the raise cutoff point. This is because the median is not affected by outliers as much as the mean.

In this dataset, the value of 32 is much larger than the other values and could skew the mean upward, which would result in a higher cutoff point for the raise. On the other hand, the median is not affected by the outlier and provides a better representation of the central value of the dataset.

A 5% raise for employees who have been employed for at least 8 years (the median) would be more fair and reasonable for all employees.

Learn more about Mean and Median here:

https://brainly.com/question/28670966

#SPJ1

The total cost is $76.32.

Equations are mathematical statements with two algebraic expressions flanking the equals (=) sign on either side.

It demonstrates the equality of the relationship between the expressions printed on the left and right sides. LHS = RHS is a common mathematical formula.

Coefficients, variables, operators, constants, terms, expressions, and the equal to sign are some of the components of an equation. The "=" sign and terms on both sides must always be present when writing an equation.

Given:

Juan lives in a state where sales tax is 6%.

The modeled Equation is:

c + 0.06c, where c is the pre-tax price of the item.

If we have the pre-tax price of $72.00.

Total cost = 1.06 c

                 = 1.06 x 72

                 = $76.32

Learn more about equation here:

https://brainly.com/question/29657992

#SPJ9

The curved surface area of the hemisphere is 864π cm².

When a sphere is cut into two equal parts a hemisphere is formed.

The volume of a hemisphere is (2/3)πr³ and the area surface area of a hemisphere is 2πr².

Given, The volume of a solid hemisphere is 1152π cm³.

Therefore,  (2/3)πr³ = 1152π.

r³ = 1728.

Now, 2×2×2 = 8 so 12³ is 1728.

r = 12 cm.

Now, The surface area is 2×π×144 cm².

= 864π cm².

If a circle is cut into two equal parts we call them each a semicircle.

learn more about hemispheres here :

https://brainly.com/question/12169868

#SPJ9

Answer:

Step-by-step explanation:

a= 180-130

 = 50 (angles on a straight line)

Answer:

178ft

Step-by-step explanation:

Split the shape up into pieces.  If you make an invisible cut vertically from the 14 ft length you will realise you have a small triangle attached to a rectangle.

You can assume that the height of the triangle is equal to the 20 - 14 as the left side must equal the right side for this shape thus this invisible length is equal to 6 ft

Area of triangle: (6ft x 6ft)/2 = 18 ft^2

Area of rectangle: 20ft x 8ft = 160 ft^2

Area of total shape = 160 + 18 =  178ft

So you're correct

Answer:

 44 ft

Step-by-step explanation:

You want to know the height of a tree whose top is at angles of elevation of 42° and 50° from points 12 feet apart.

The tangent of an angle is related to the side lengths of a right triangle by ...

  Tan = Opposite/Adjacent

This tells us the length of the side adjacent to the angle of elevation is ...

  Adjacent = Opposite/Tan

Here, the height of the tree is the side of the triangle opposite the angle of elevation, and the difference of adjacent sides is 12 ft:

  12 = h/tan(42°) -h/tan(50°)

  h = 12/(1/tan(42°) -1/tan(50°)) ≈ 12/(1.11061 -0.83910) ≈ 44.197

The approximate height of the tree is 44 feet.

The Coordinates for A is (π/2, 1).

and, the Coordinates for B is (-π, 0).

In mathematics, a function is represented as a rule that produces a distinct result for each input x. The collection of all the values that the function may input while it is defined is known as the domain. The entire set of values that the function's output can produce is referred to as the range. The set of values that could be a function's outputs is known as the co-domain.

Given:

We have  y= cos x.

So, when x = π/2 sin x have the maximum value which equals to 1.

Then ,the coordinates is (π/2, 1).

and, when x=π or x=-π then sin x =0

Then ,the coordinates is (-π, 0).

Learn more about Function here:

https://brainly.com/question/3413359

#SPJ9

Answer:

Yemia is 60

Step-by-step explanation:

Answer:

Yemia is 60

Step-by-step explanation:

(27 + 3) x 2 = 60

Because of the inflation of 2.46%, the $50 of Kendra is not worth of $62.3 after 10 years.

The amount that a collection of products and services have increased in price during a specific time frame, typically a year, is measured by inflation. One of the most well-known words in economics, perhaps.

Countries have experienced protracted periods of instability due to inflation.

Prices for goods and services are always subject to change in a market economy.

Some prices increase while others decrease.

When prices of products and services grow broadly rather than just for a few specific items, it is said to be inflation.

This means that today, for the same amount of money, you can buy less than you could yesterday.

So, we have: $50

Now, the inflation rate is 2.46%.

Then, 50/100 * 2.46

1.23

1.23 * 10

12.3

12.3 + 50 = $62.3

Therefore, because of the inflation of 2.46%, the $50 of Kendra is not worth of $62.3 after 10 years.

Know more about inflation here:

https://brainly.com/question/777738

#SPJ1

In essence, a function is a rule that assigns to each value of the input set (also known as the domain), a unique value of the output set (also known as the range).

A function is a fundamental mathematical concept that is used to describe the relationship between two sets of values.

To understand the idea of a function, imagine a machine that takes in an input and produces an output. The input values are the domain of the function, and the output values are the range. A function can be represented as an equation, a graph, or a table. For example, the equation f(x) = x + 3 represents a function that takes in an input value x and produces an output value that is 3 greater than the input value.

One of the key features of a function is that each input value must have a unique output value. This means that if you input the same value into the function twice, you should get the same output value both times. In mathematical terms, we say that a function is well-defined if it has a unique output value for each input value.

Functions are used in a wide range of mathematical applications, from algebra and calculus to statistics and data analysis. They provide a powerful tool for describing and analyzing relationships between different sets of values.

To know more about function here

https://brainly.com/question/28193995

#SPJ4

There are 25.36 fluid ounces in 750 milliliters (mL). To convert mL to fluid ounces, multiply the volume in mL by the conversion factor of 0.033814.

There are 25.36 fluid ounces in 750 milliliters (mL).

To convert mL to fluid ounces (fl oz), you can use the conversion factor of 0.033814, which is the number of fluid ounces in one milliliter. Multiplying the volume in mL by this conversion factor gives the result in fluid ounces.

So, to convert 750 mL to fluid ounces, you can multiply 750 by 0.033814, which gives:

750 mL * 0.033814 = 25.36 fl oz

Therefore, 750 mL is equivalent to 25.36 fluid ounces.

Learn more about metric systems here: brainly.com/question/29953513

#SPJ4

The formula for converting kilograms (kg) to pounds (lbs) is to multiply the mass in kilograms by 2.20462262.The calculation for converting 156 kg to lbs is 156 x 2.20462262 = 344.7382612 lbs.

Thus, the value of 156 kg in lbs is 344.7382612 lbs.To better understand, we can break down the formula into steps. We start by multiplying the kilograms (kg) by 2. This results in 312, which is twice the mass in kilograms. We now add 0.20462262 to the result (312). This gives us a total of 312.20462262, which is the equivalent of 156 kg in lbs.The result of the formula is a unit of mass in the imperial system of measurement. The imperial system of measurement is used in the United States and Great Britain, and is based on pounds (lbs).To further illustrate, one kilogram is equal to 2.20462262 pounds. Thus, 156 kg is equal to 156 x 2.20462262 = 344.7382612 lbs.In conclusion, it is possible to convert kilograms (kg) to pounds.

Learn about kilograms here:

https://brainly.com/question/941818

#SPJ4

1) If the couple must sit together, there are 240 ways that they can be seated.

2) If the couple must not be together, there are 720 ways that they can be seated.

1) If the couple must sit together, we can think of them as one unit. So, there are 5 units to be seated around the table. We can choose any one of these units to be the starting point, and then arrange the other units clockwise around the table.

The couple can be arranged in two different ways within their unit. So, the total number of ways they can be seated is: 5! × 2 = 240.

2) If the couple must not sit together, we can think of them as separate units. So, there are 6 units to be seated around the table. We can choose any one of these units to be the starting point, and then arrange the other units clockwise around the table.

The couple cannot be seated next to each other, so there are 3 possible units where they cannot be seated next to each other. Once we have chosen one of these units for the starting point, there are 2 ways to arrange the couple within their unit. Therefore, the total number of ways they can be seated is: 5! × 2 × 3 = 720.

To learn more about seating arrangements click on,

https://brainly.com/question/30422434

#SPJ4

If ALGEBRA LaToya Barnes' credit card uses the average-daily-

method of computing finance balance-including-purchases charges. her average daily balance for the past billing cycle is 434.

The average daily balance can be found by using the formula:

Average Daily Balance = (Finance Charge / Monthly Periodic Rate)

Now we can plug in the values and solve for the average daily balance:

Average Daily Balance = (7.64 / 0.0176)

Average Daily Balance =434

Therefore, LaToya Barnes' average daily balance for the past billing cycle was 434.

Learn more about average daily balance here:https://brainly.com/question/15496507

#SPJ1

Answer:

Factor:

[tex]xy(xy+x-1)[/tex]

Evaluate:

[tex]xy(xy+x-1)[/tex]

This polynomial is a quadratic polynomial.

Step-by-step explanation:

a. Triangles ABC and EDC are similar based on the AA similarity theorem used as justification.

b. Length of AB is: 703 ft.

According to the AA similarity theorem, two triangles are similar if two of their angles are congruent to each other. If two triangles are similar, then their corresponding sides will have proportional lengths.

a. Since m<D = m<B = 91°, and angles DCE and BCA are vertical angles that are congruent, then triangles ABC and EDC are similar to each other according to the AA similarity theorem.

b. DE = 222 ft

DC = 24 ft

BC = 76 ft

AB = ?

Using the proportion formed by the corresponding lengths of the similar triangles, AB/DE = BC/DC, plug in the values and find the length of AB:

AB/222 = 76/24

Cross multiply:

AB * 24 = 222 * 76

AB = 703 ft

Learn more about the AA Similarity Theorem on:

https://brainly.com/question/21247688

#SPJ1

A function that models the total cost of running the air conditioner for the first 400 minutes is .

An equation is a  mathematical statement that is made up of two expressions connected by an equal sign.  In its simplest form in algebra, the definition of an equation is a mathematical statement that shows that two mathematical expressions are equal. For instance, 3x + 5 = 14 is an equation, in which 3x + 5 and 14 are two expressions separated by an 'equal' sign.

here, we have,

Let the number of minutes be m.

Let the total cost be T.

Given the following data:

Cost of air conditioner = $130

Running cost = $0.25 per minute

Time = 400 minutes.

To write a function that models the total cost of running the air conditioner for the first 400 minutes:

How to solve a word problem.

First of all, we would write an equation to models the total cost of running the air conditioner for the first 400 minutes:

For the total time:

0.25m

For the total cost:

T= 130 + 0.25m

For the domain:

The value of m is the domain and it can be chosen from 0 to 130.

Domain (m) = [0, 130].

For the range:

A range represents the minimum and maximum value of a data set.

Thus, the value of T would be between 130 and 230.

Range = [130, 230].

For the intercept:

when x = 0, we have:

y = 130 +  0.25(0)

y = 130.

Intercept = [0, 130]

Read more on word problems here:

brainly.com/question/13170908

#SPJ1