Developing and stockpiling hydrogen bombs. b. Aiding South Korea in the Korean War. c. Setting the goal of a moon landing. d. Instituting the Berlin Airlift.

Answers

Answer 1

Throughout the Korean War, South Korea received significant support from the United States.

Throughout the Korean War, the United States significantly supported South Korea militarily, economically, and politically. This involved deploying US soldiers to fight alongside South Korean forces, supplying them with equipment and supplies, and taking part in talks with North Korea. As part of its military assistance, the United States sent personnel and supplies, supported air and sea operations, and provided arms and ammunition. In the years following the war, the U.S. also gave South Korea economic and military assistance, assisting in the nation's reconstruction and fortifying its defences.

learn more about Korean War Refer:brainly.com/question/11375126

#SPJ4

complete question:What part did the United States play in the Korean War when it came to supporting South Korea? a.Building up a supply of hydrogen bombs. b. Supporting South Korea in the Korean War. c. Having a moon landing as a goal. d. Starting the Airlift to Berlin.


Related Questions

consider the molecule 1,3-dichloropropadiene. (a) list all the symmetry operations for the molecule.

Answers

The symmetry operations are, E (identity operation), C2 (rotation by 180 degrees about the carbon-carbon double bond), C2' (rotation by 180 degrees about the axis passing through both chlorine atoms), sigma_v (reflection through a plane perpendicular to the carbon-carbon double bond), sigma_v' (reflection through a plane perpendicular to the axis passing through both chlorine atoms), i (inversion through a point at the midpoint of the carbon-carbon double bond).

The molecule 1,3-dichloropropadiene has the chemical formula C3H2Cl2.

There are four atoms in the molecule, and each atom has a set of valence electrons that can be used to form chemical bonds. We can identify two C2 axes that pass through the carbon-carbon double bond, and one C2 axis that passes through both chlorine atoms. There are also two perpendicular planes of symmetry that bisect the molecule, one containing the carbon-carbon double bond and the other containing the two chlorine atoms.

To know more about the symmetry operations, here

brainly.com/question/26061706

#SPJ4

Indicate the substance that contains the most negatively charged anion. O Mg3N2 O Al 203 O BaCl2 O Srs

Answers

Answer:

Mg3N2

Explanation:

A chemistry class is experimenting with iodine to see which common white powder items will react and make the iodine change color. Which item listed will have a chemical reaction with iodine?
A. baking soda
B. cornstarch
C. salt
D. powdered sugar

Answers

Answer:

B. Cornstarch

Explanation:

Iodine reacts with some substances and changes color as a result of the reaction. Out of the items listed:

B. Cornstarch will react with iodine and produce a blue-black color. This reaction is due to the presence of starch, which reacts with iodine to form a complex molecule called iodine starch.

A. Baking soda, also known as sodium bicarbonate, does not react with iodine and will not cause a color change.

C. Salt, also known as sodium chloride, does not react with iodine and will not cause a color change.

D. Powdered sugar, also known as sucrose, does not react with iodine and will not cause a color change.

If a precipitation reaction occurs, what will be the products of the unbalanced
reaction shown below?
Pb(NO3)2(aq) + K₂(SO4)(aq) →
Solubility Table
A. PbSO4(s) + KNO3(s)
B. PbSO4(aq) + KNO3(s)
C. No precipitate will form.
D. PbSO4(s) + KNO3(aq)

Answers

The products of the reaction are  PbSO4(s) + KNO3(aq)

How does a precipitate form in a reaction?

A precipitate is a solid that forms and separates out of a solution as the result of a chemical reaction. Precipitation reactions occur when two solutions containing ions are mixed together and the resulting mixture is no longer able to hold the ions in solution, causing them to form an insoluble solid.

In order to predict whether a precipitate will form or not, the solubility rules can be used to determine if a compound is soluble or insoluble in a particular solution. If the resulting compound is insoluble, a precipitate will form.

Learn more about precipitate:https://brainly.com/question/18109776

#SPJ1

When Ibuprofen is given for fever to children 6 months of age up to 2 years, the usual dose is 5 milligrams (mg) per kilogram (kg) of body weight when the fever is under 102.5 degrees Fahrenheit. How much medicine would be usual dose for a 18 month old weighing 19 pounds?

Answers

54.58g of Medicine would be usual dose for a 18 month old weighing 19 pounds.

How can we calculate about the dose to be given by using information?

Here, given that usual dose  for children of use between 6 month to 2 year  fever, is 5 mg per kg body weight.

1 kg body weight require 5 mg dose of medicine. and are have to find out how much dose of medicine

Required for 18 month children whose weighing is 24 pounds.

So, first are convert all the data in milligram because answer is required in mg. we know that

1 pound = 0.454K2

1 kg= 100 mg

.: 24 pounds = 24X0. 454 x 100 mg

[ 1 pound = 0.454 K2 then 24 pound = 24×0.454k2. and 24x0.454g = 24×0.454 × 100 mg

Now, 10 mg body weight remise dose is 5 mg then 24x054xlos my body.

required dose of children of 18 month and weighing is 24X0.454x100 mg is = 24x0.454x100 x 5 106 = 54.48 mg.

Answer: 54.48 mg.

To know more about Ibuprofen visit:

https://brainly.com/question/29807990

#SPJ1

How many moles are in 202.33 grams of sulfuric acid

Answers

Answer:

8?

Explanation:

balance the following equation using the smallest possible integers and determine the coefficient of hcl? fe2s3 hcl --> fecl3 h2s

Answers

The balanced chemical equation for the given reaction is given as,

Fe₂S₃ + 6HCl → 2FeCl₃ + 3H₂S

A balanced chemical equation is defined as an equation where the number of atoms of each type in the reaction is the same on both reactants and product sides. Generally, the mass, as well as the change, are equal in a balanced chemical equation.

Basically chemical equation is said to be unbalanced if the number of atoms of each element on the left-hand side is not equal to the number of atoms present on the right-hand side. The balanced chemical equation remains always in accordance with the Law of Conservation of Mass.

The coefficient of the HCl is 6.

Learn more about balanced chemical reaction from the link given below.

https://brainly.com/question/28294176

#SPJ4

the lattice enthalpy of licl is positive, indicating that it takes energy to break the ions apart in licl. however, the dissolution of licl in water is an exothermic process. identify all particle-particle interactions that contribute significantly to the dissolution process being exothermic. for each interaction, include the particles that interact and the specific type of intermolecular force between those particles.

Answers

When LiCl dissolves in water, the Li+ and Cl- ions become hydrated by water molecules, and these hydration interactions are the main contributors to the dissolution process being exothermic.

Specifically, the exothermicity arises due to the attractive electrostatic interactions between the ions and water molecules, which release energy as heat when the ions become surrounded by the solvent molecules.

In addition, the water molecules also form hydrogen bonds with each other and with the ions, further stabilizing the hydrated complex and contributing to the overall exothermicity of the process.

Therefore, the dissolution of LiCl in water is exothermic due to the particle-particle interactions between the ions and water molecules, including electrostatic interactions and hydrogen bonding.

To know more about the exothermic process, here

brainly.com/question/28741191

#SPJ4

From a pH meter titration curve a student experimentally determines the pK a of benzoic acid to be 4.06. Calculate the experimental Ka for benzoic acid. If Ka for benzoic acid is 6.3 × 10-5 determine the percent error in their experimental results.
(1pts)
Experimental Ka for benzoic acid
(1pts)
Percent error to 2 significant figures

Answers

The percent error to 2 significant figures is 11%.

What is Titration?

Titration is a laboratory technique used to determine the concentration of a solution by reacting it with a standard solution of known concentration. The process involves adding the standard solution to the solution of unknown concentration until the reaction is complete, at which point the amount of standard solution needed to reach the endpoint is used to calculate the concentration of the unknown solution.

The relationship between pKa and Ka is given by:

pKa = -log(Ka)

Rearranging this equation, we get:

Ka = 10^(-pKa)

Substituting the given value of pKa = 4.06, we get:

Ka = 10^(-4.06) = 7.01 x 10^(-5)

The experimental Ka for benzoic acid is 7.01 x 10^(-5).

To calculate the percent error, we use the formula:

percent error = (|experimental value - accepted value| / accepted value) x 100%

Substituting the given values, we get:

percent error = (|7.01 x 10^(-5) - 6.3 x 10^(-5)| / 6.3 x 10^(-5)) x 100%

percent error = 11.19%

The percent error to 2 significant figures is 11%.

Learn more about Titration from given link

https://brainly.com/question/186765

#SPJ4

If the normal, undisturbed position of the wave is at 0 on the diagram below, what is the amplitude of Wave A?


20 m

40 m

10 m

5 m

Answers

5m is the amplitude of Wave A.

What is amplitude ?

A wave's amplitude is the separation between its starting point and its maximum displacement. Frequency is the quantity of waves traveling by a certain place each second. Period is the amount of time it takes for one wave cycle to finish.

What is wave ?

An energy-conducting disturbance in a medium known as a wave is one that does not involve any net particle motion. It could manifest as elasto-deformation, a shift in pressure, electric or magnetic intensity, electric potential, or temperature.

Therefore, 5m is the amplitude of Wave A.

Learn more about amplitude from the given link.

https://brainly.com/question/3613222

#SPJ1

chromium forms two bromides, one that is 17.82% chromium by mass and another that is 24.55% chromium. you will show that these compounds obey the law of multiple proportions. in the first sample, what is the mass of chromium per 1 gram of bromide?
(hint, in a 100 g sample how many grams are chromium and how many grams are bromide? the chromium to bromide ratio gives the mass of chromium per 1 gram of bromide.)
answer : _______

Answers

The mass of chromium in 100 g of the first sample is 17.82 g. Then, the mass of bromine in 100 g of the sample is 82.18 g. Therefore, there will be 0.21 g per 1 g of bromine.

What is mass percent?

The mass percent of an element or group in a mixture or compound is the indicating how much gram of the element is present in 100 g of the sample.

Thus it is the ratio of its mass to the total mass of the sample multiplied by 100.

Given that the first sample of chromium bromide contains 17.82% of chromium. Hence, 17.82 g of Cr is present in 100 g of the sample.

Then, mass percent of Br = 100 - 17.82 g = 82.18 g.

Thus, for 82.18 g of Br, there is 17.82 g of Cr.

Then, for 1 g of Br:

17.82/82.18 = 0.216 g of Cr is present.

Therefore, mass of chromium per 1 g of bromide is 021 g.

Find more on mass percent:

https://brainly.com/question/20714718

#SPJ1

Iron (II) sulfide contains 36.47% sulfer by mass. If 87.91 g of iron sulfide is made by reacting iron with sulfer, what mass of iron was reacted?

Answers

36.47% of the mass of iron (II) sulfide is sulfur. If 87.91 g of iron sulfide is produced by reacting iron with sulfur, the amount of iron that was reacted is 87.91 g Fe(II) sulfur multiplied by 63.53% Fe (II) equals 55.85 g Fe (II)

What is meant  by sulfur?The chemical element sulfur, which has an atomic number of 16, is known to people because it is thought to be the least reactive element. Prior to that, it was employed in the vulcanization of natural rubber as well as the production of fertilizers. Sulfur is used to vulcanize black rubber, as a fungicide, and in the production of black gunpowder. The creation of sulfuric acid, possibly the most significant chemical produced by western civilizations, uses the majority of sulfur, though.Sulfur is not hazardous to humans at all. A burning sensation or diarrhea could, however, result from consuming too much sulfur. Inhaling sulfur dust may aggravate the airways or result in coughing. Additionally, it might irritate your skin and eyes.

To learn more about sulfur, refer to:

https://brainly.com/question/15654465

#SPJ4

An aqueous KNO3 solution is made using 70.5g of KNO3 diluted to a total solution volume of 1.97 L .
Calculate the molarity of the solution. (assume a density of 1.05 g/mL for the solution)
Calculate the molality of the solution.
Calculate the mass percent of the solution.

Answers

The molarity of the solution is 0.0101 M.The molality of the solution is 337.2 mol/kg.The mass percent of the solution is 97.16%.Solving for the molarity, molality and mass percent of the solution:

Molarity:Molarity = moles of solute / volume of solution in litersFirst, calculate the number of moles of KNO3 in the solution:moles of KNO3 = mass of KNO3 / molar mass of KNO3

molar mass of KNO3 = 39.1 g/mol (K) + 14.0 g/mol (N) + 3x16.0 g/mol (O)

                                  = 101.1 g/mol

moles of KNO3 = 70.5 g / 101.1 g/mol

                          = 0.697 mol

Next, calculate the volume of the solution in liters:volume of solution = mass of solution / density of solution

mass of solution = mass of KNO3 + mass of water

                            = 70.5 g + (1.97 L x 1.05 g/mL)

                              = 70.5 g + 2.067 g = 72.567 g

volume of solution = 72.567 g / 1.05 g/mL

                               = 69.105 L

Finally, calculate the molarity:

Molarity = 0.697 mol / 69.105 L

             = 0.0101 M

Molality:Molality = moles of solute / mass of solvent in kgAssuming the mass of the solute (KNO3) does not significantly affect the mass of the solution, we can use the same mass of solution as before:

mass of solvent = mass of solution - mass of solute = 72.567 g - 70.5 g

                              = 2.067 g

Converting to kg:

mass of solvent = 2.067 g / 1000 g/kg

                           = 0.002067 kg

Molality = 0.697 mol / 0.002067 kg

                = 337.2 mol/kg

Mass percent:Mass percent = (mass of solute / mass of solution) x 100%mass of solute = 70.5 gmass of solution = 72.567 g

Mass percent = (70.5 g / 72.567 g) x 100%

                        = 97.16%

Learn more about molarity on

https://brainly.com/question/8732513

#SPJ1

Determine the mechanism and product for the given reaction by adding atoms, bonds, nonbonding electron pairs, and curved arrows. Acid and water are added in the second step.
−→−−−−−−−−−−CH3CH2MgBrProduct

Answers

The final product is 1-butanol.

The given reaction is the addition of a Grignard reagent, CH₃CH₂MgBr, to a carbonyl compound.

The mechanism for the reaction is a nucleophilic addition. The mechanism can be broken down into three main steps:

Step 1: Nucleophilic attack

The carbon atom in the carbonyl group has a partial positive charge, making it an electrophile. The carbon atom in the Grignard reagent has a partial negative charge, making it a nucleophile. The nucleophilic carbon attacks the electrophilic carbon of the carbonyl group, forming a tetrahedral intermediate.

             H

             |

  H₃C     C      O

             |

             CH₃

               -

               |

        CH₃CH₂MgBr

Step 2: Protonation

The tetrahedral intermediate is unstable and collapses. In this step, an acid, such as H₃O⁺, protonates the oxygen atom, which forms an alcohol.

             H

             |

  H₃C     C      OH

             |

             CH₃

               -

               |

        CH3CH2MgBr + H3O+

Step 3: Deprotonation

In the final step, a base, such as water, removes a proton from the protonated alcohol to form the final product, which is a neutral alcohol.

             H

             |

  H₃C     C      OH

             |

             CH₃

                  |

                  H

Learn more about nucleophilic addition here: https://brainly.com/question/28331583

#SPJ4

Managing a salt-water aquarium. A tank at the New Jersey State Aquarium has a volume of 2.9 million liters.' Bacteria are used to remove nitrate that would otherwise build up to toxic levels. Aquarium water is first pumped into a 2 700-L deaeration tank containing bacteria that consume 02 in the presence of added methanol: Bacteria 2CH3OH + 302 2002 + 4H20 (1) Methanol Anoxic (deoxygenated) water from the deaeration tank flows into a 1 500-L denitrification reactor containing colonies of Pseudomonas bacteria in a porous medium. Methanol is injected continuously and nitrate is converted into nitrite and then into nitrogen: Bacteria 3NO3 + CH3OH → 3NO2 + CO2 + 2H20 (2) Nitrate nitrite Bacteria 2NOZ + CH3OH → N2 + CO2 + H2O + 20H (3) (a) Deaeration can be thought of as a slow, bacteria-mediated titra- tion of O2 by CH3OH. The concentration of O2 in seawater at 24°C is 220 MM. How many liters of CH3OH (FM 32.04, density = 0.791 g/mL) are required by Reaction 1 for 2.9 million liters of aquarium water? (b) Write the net reaction showing nitrate plus methanol going to nitrogen. How many liters of CH3OH are required by the net reaction for 2.9 million liters of aquarium water with a nitrate concentration of 8 100 uM? (c) In addition to consuming methanol for Reactions 1 through 3, the bacteria require 30% more methanol for their own growth. What is the total volume of methanol required to denitrify 2.9 million liters of aquarium water?

Answers

A)17,300 L liters of CH3OH (FM 32.04, density = 0.791 g/mL) are required by Reaction 1 for 2.9 million liters of aquarium water.

B)192L liters of CH3OH are required by the net reaction for 2.9 million liters of aquarium water with a nitrate concentration of 8 100 uM.

C)The total volume of methanol required to denitrify 2.9 million liters of aquarium water is 22,496 L.

(a) To calculate the amount of CH3OH required for Reaction 1, we need to first determine the amount of O2 in 2.9 million liters of aquarium water.

Concentration of O2 in seawater = 220 mM

Volume of aquarium water = 2.9 million L

Amount of O2 in aquarium water = concentration x volume = 220 mM x 2.9 million L = 6.38 x 10^8 mmol

From the balanced chemical equation for Reaction 1, we see that 3 moles of O2 react with 2 moles of CH3OH. Therefore, the number of moles of CH3OH required is:

(2/3) x (6.38 x 10^8 mmol O2) = 4.25 x 10^8 mmol CH3OH

To convert this to volume, we need to use the density of CH3OH:

density = 0.791 g/mL

molar mass of CH3OH = 32.04 g/mol

volume of CH3OH = (4.25 x 10^8 mmol) x (32.04 g/mol) / (0.791 g/mL) = 1.73 x 10^7 mL = 17,300 L

(b) The net reaction for denitrification is:

5NO3- + CH3OH + 4H+ → N2 + 3CO2 + 7H2O

From the balanced chemical equation, we see that 1 mole of CH3OH is required for every 5 moles of NO3-. The concentration of nitrate in the aquarium water is 8,100 uM, which is equivalent to 8.1 mM.

Number of moles of nitrate in aquarium water = concentration x volume = 8.1 mM x 2.9 million L = 2.35 x 10^7 mmol

Number of moles of CH3OH required = (1/5) x (2.35 x 10^7 mmol) = 4.7 x 10^6 mmol

To convert this to volume, we use the same calculation as in part (a):

volume of CH3OH = (4.7 x 10^6 mmol) x (32.04 g/mol) / (0.791 g/mL) = 1.92 x 10^5 mL = 192 L

(c) The bacteria require 30% more methanol for their own growth, which means we need to add an additional 30% of the methanol required for Reactions 1-3.

Total volume of methanol required = volume from part (a) + volume from part (b) + 0.3 x (volume from part (b))

Total volume of methanol required = 17,300 L + 192 L + 0.3 x 192 L = 22,496 L

Therefore, the total volume of methanol required to denitrify 2.9 million liters of aquarium water is 22,496 L.

To know more about methanol here

https://brainly.com/question/28864629

#SPJ4

explain why the following ground state elec- tron configurations are not possible: (a) 1s22s32p3 (b) 1s22s22p33s6 (c) 1s22s22p73s23p8 (d) 1s22s22p63s23p14s23d14

Answers

Answer:

(a) The electron configuration 1s22s32p3 is not possible because it violates the Pauli exclusion principle, which states that no two electrons in an atom can have the same set of four quantum numbers. The 2p sublevel can hold a maximum of six electrons, with two electrons in each of the three orbitals. Therefore, the 2p sublevel cannot accommodate five electrons as in the given configuration.

(b) The electron configuration 1s22s22p33s6 is not possible because it violates the Aufbau principle, which states that electrons fill orbitals in order of increasing energy, starting from the lowest energy level. The 3s sublevel has a lower energy than the 3p sublevel, so it should be filled before the 3p sublevel. Therefore, the configuration should be 1s22s22p63s2 instead.

(c) The electron configuration 1s22s22p73s23p8 is not possible because it violates the Pauli exclusion principle. The 3p sublevel can hold a maximum of six electrons, with two electrons in each of the three orbitals. Therefore, the 3p sublevel cannot accommodate eight electrons as in the given configuration.

(d) The electron configuration 1s22s22p63s23p14s23d14 is not possible because it violates the Hund's rule, which states that electrons fill orbitals of the same energy level singly, with parallel spins, before they pair up. In the 3d sublevel, the five d orbitals are degenerate (have the same energy). Therefore, the electrons should first fill each of the five d orbitals singly, before pairing up. The correct configuration for this atom should be 1s22s22p63s23p63d54s2 instead.

Explanation:

The ground state electron configuration of an atom is the arrangement of electrons in the lowest energy levels available, according to the rules of the Aufbau principle, Pauli exclusion principle, and Hund's rule.

(a) The electron configuration 1s22s32p3 is not possible because it violates the Pauli exclusion principle, which states that no two electrons in an atom can have the same set of four quantum numbers. The 2p sublevel can hold a maximum of six electrons, with two electrons in each of the three orbitals. Therefore, the 2p sublevel cannot accommodate five electrons as in the given configuration.

(b) The electron configuration 1s22s22p33s6 is not possible because it violates the Aufbau principle, which states that electrons fill orbitals in order of increasing energy, starting from the lowest energy level. The 3s sublevel has a lower energy than the 3p sublevel, so it should be filled before the 3p sublevel. Therefore, the configuration should be 1s22s22p63s2 instead.

(c) The electron configuration 1s22s22p73s23p8 is not possible because it violates the Pauli exclusion principle. The 3p sublevel can hold a maximum of six electrons, with two electrons in each of the three orbitals. Therefore, the 3p sublevel cannot accommodate eight electrons as in the given configuration.

(d) The electron configuration 1s22s22p63s23p14s23d14 is not possible because it violates the Hund's rule, which states that electrons fill orbitals of the same energy level singly, with parallel spins, before they pair up. In the 3d sublevel, the five d orbitals are degenerate (have the same energy). Therefore, the electrons should first fill each of the five d orbitals singly, before pairing up. The correct configuration for this atom should be 1s22s22p63s23p63d54s2 instead.

bonding is similar to ionic bonding, except there are no high-electronegativity atoms present to accept any electrons that the present atoms are willing to donate. bonds are responsible for binding atoms together within a molecule of propane, whereas bonds bind separate propane molecules together in a condensed state (liquid or crystal). bonds are the only primary bonds that are directionally dependent. Materials whose constituent particles are bound by bonding are generally expected to have the lowest melting temperatures. Choose and fill the blanks from the following options: (a) Covalent (b) Ionic (c) Van der Waals (d) Hydrogen (e) Metallic

Answers

bonds are the only primary bonds that are directionally dependent. Materials whose constituent particles are bound by bonding are generally expected to have the lowest melting temperatures

The correct options to fill in the blanks are is a)covalent bond.

• Bonding is similar to covalent bonding, except there are no high-electronegativity atoms present to accept any electrons that the present atoms are willing to donate.

• Covalent bonds are responsible for binding atoms together within a molecule of propane, whereas van der Waals bonds bind separate propane molecules together in a condensed state (liquid or crystal).

• Covalent bonds are the only primary bonds that are directionally dependent.

• Materials whose constituent particles are bound by metallic bonding are generally expected to have the lowest melting temperatures.

Learn more about covalent bond here:

https://brainly.com/question/19382448

#SPJ4

The particles shown represent a proposed two-step mechanism for the destruction of ozone (O3) in the upper atmosphere. Based on the proposed mechanism, which of the following is the rate law expression for the destruction of O3?

Answers

The rate law expression for the destruction of O3 based on the proposed two-step mechanism is: rate = k[O3][NO]

This expression is derived from the proposed mechanism by identifying the rate-determining step (the slow step) and using the concentrations of the reactants involved in that step.

In this case, the slow step is the reaction between O3 and NO to form NO2 and O2. Therefore, the rate law expression is based on the concentrations of O3 and NO, and the rate constant k.

It is important to note that the rate law expression does not include the concentrations of the other reactants or products involved in the mechanism, as they are not involved in the rate-determining step.

Overall, the rate law expression for the destruction of O3 in the upper atmosphere based on the proposed two-step mechanism is rate = k[O3][NO].

To know more about destruction of O3, refer here:

https://brainly.com/question/30052644#

#SPJ11

what is the balance of _NaCl + _F2 --> _NaF + _Cl2

Answers

Answer:

The balanced equation is

2NaCl + F2 ---> 2NaF + Cl2

Consider the following compounds, all of which are soluble in water:
I: Glucose, C6H12O6
II: Potassium nitrate, KNO3
III: Glycerol, C3H8O3
IV: Acetic acid, HC2H3O2
V: Ammonium carbonate, (NH4)2CO3
Which of these compounds would you expect to behave as nonelectrolyte(s) in solution?

Answers

All the compounds given are soluble in water. The compounds that behave as nonelectrolyte(s) in solution are glucose and glycerol.

Nonelectrolytes are compounds that do not dissociate into ions in water and therefore do not conduct electricity.

Glucose (I) and glycerol (III) are both examples of nonelectrolytes. They are soluble in water but do not dissociate into ions, so they do not conduct electricity.

Potassium nitrate (II), acetic acid (IV), and ammonium carbonate (V) are all electrolytes, meaning they dissociate into ions in water and conduct electricity.

Therefore, the compounds that would behave as nonelectrolytes in solution are glucose (I) and glycerol (III) and all the given compounds are soluble in water.

To know more about nonelectrolytes, refer here:

https://brainly.com/question/29771118#

#SPJ11

draw the structural formula(s) for the organic product(s) formed when the following compound is heated at reflux in an excess of concentrated .

Answers

1,3 diiodo propane is formed when oxetane is heated at reflux.

Reflux is defined as the process which involves heating the chemical reaction for a specific amount of time, while continually cooling the vapor produced back into liquid form, using a condenser. The vapors that are produced above the reaction continually undergo condensation, returning to the flask as a condensate.

Oxetane is a stable carbon compound which shows characteristic properties when reacted with conc. acids. When oxetane reacts with HI it gets reduced to form 1,3 diiodo propane which is also an organic compound.

Therefore, when oxetane is heated in excess amount of concentrated HI, the product formed is 1,3 diiodo propane.

The reaction is given in the image attached below.

The given question is incomplete and the completed question is given below.

Draw the structural formula(s) for the organic product(s) formed when the following compound (OXETANE) is heated at reflux in an excess of concentrated (HI) .

Learn more about reflux from the link given below.

https://brainly.com/question/29484768

#SPJ4

PLS SOMONE HELP I KNOW THE PHOTO ISNT THAT GOOD BUT I REALLY NEED HELP I WILL MARK AS BRAINLIEST AND GIVE 5 STARS ASWELL AS A HEART PLSS IM BEGGING YOU

Answers

The statement that best explains why the chemical equation provided for combustion of methane supports law of conservation of mass is as follows: There is same number of each kind of atom before and after the chemical reaction and the total mass remains the same (option D).

What is law of conservation of mass?

The law of conservation of mass is a conservation law that states that the total mass of a closed system remains constant regardless of the chemical or physical changes that take place within it.

The law of conservation of mass further explains that in a chemical reaction, the amount of each atom on both sides of the equation is the same.

According to this question, methane gets combusted in air. To fulfill the law of conservation of mass, the same number of each kind of atom before and after the chemical reaction and the total mass remains the same.

Learn more about law of conservation of mass at: https://brainly.com/question/28711001

#SPJ1

A sewage lagoon that has a surface area of 100,000 m2 (10 ha) and a depth of 1 m is receiving 8,640 m3/d of sewage containing 100 mg/L of biodegradable contaminant. At a steady state, the effluent from the lagoon must not exceed 20 mg/L of biodegradable contaminant. Assuming the lagoon is well mixed and that there are no losses or gains of water in the lagoon other than the sewage input, what biodegradation reaction rate coefficient (d-1) must be achieved?

Answers

The biodegradation reaction rate coefficient (d-1) must be achieved  for the required concentration of exit stream is 0.003456 /day.

What is biodegradation ?

The term biodegradation is defined as the degradation of the materials into environmentally acceptable products such as water, carbon dioxide, and biomass by the action of naturally available microorganisms under normal environmental conditions.

Suppose C₀ represent the initial concentration of the biodegradable organic material = 100 g/L = 100 g/m³

Then,C be the concentration of biodegradable organic material that leaves the lagoon = 20 mg/L = 20 g/m³

Now, the rate constant be k

Let V be the volume of the lagoon

= 10 hectares × 1 m

= 100000 × 1

= 100000 m³

F₀ be the flow rate of in fluent into the first lagoon = 8640 m³/day

(kC₀V/F₀) = (C₀ - C)/C

(k×100×100000/8640)

= (100-20)/20

k = (4×8640)/(100×100000)

= 0.003456 /day

Thus, The biodegradation reaction rate coefficient (d-1) must be achieved  for the required concentration of exit stream is 0.003456 /day.

To learn more about the biodegradation, follow the link;

https://brainly.com/question/23858132

#SPJ9

The drawings below represent four different forms of electromagnetic energy.

Which diagram represents electromagnetic energy with the longest wavelength?


A

B

C

D

Answers

The diagram B  represents electromagnetic energy with the longest wavelength.

What is wavelength ?

The Greek letter lambda (λ), which represents wavelength, is frequently used. When describing modulated waves, their sinusoidal envelopes, or waves created by the interference of several sinusoids, the term wavelength is also occasionally used.

What is electromagnetic energy ?

Radiant energy called electromagnetic energy moves in waves at the speed of light. It can also be referred to as radiant energy, light, electromagnetic waves, electromagnetic radiation, or the motion of electromagnetic waves. Heat can be transferred through electromagnetic radiation.

Therefore, The diagram B  represents electromagnetic energy with the longest wavelength.

Learn more about wavelength from the given link.

https://brainly.com/question/16051869

#SPJ1

enter all allowable magnetic quantum numbers for each of the principal and angular momentum quantum number combinations given below.

Answers

For principal quantum number n = 1, l = 0 and m = 0.

For n = 2, l= 0, 1 and m = -1,0,1.

For n = 3, l = 0,1,2 and m = -2,-1,0,1,2

The magnetic quantum number (m) is one of the four quantum numbers used to describe the unique state of an electron in an atom. It goes from -l to +l.

a. For n=1 and l=0, the only allowable magnetic quantum number is 0.

b. For n=2 and l=0, the only allowable magnetic quantum number is 0.

c. For n=2 and l=1, the allowable magnetic quantum numbers are -1, 0, and 1.

d. For n=3 and l=0, the only allowable magnetic quantum number is 0.

e. For n=3 and l=1, the allowable magnetic quantum numbers are -1, 0, and 1.

f. For n=3 and l=2, the allowable magnetic quantum numbers are -2, -1, 0, 1, and 2.

To know more about the magnetic quantum numbers, here

brainly.com/question/14920144

#SPJ4

--The complete question is, Enter all allowable magnetic quantum numbers for each of the principal and angular momentum quantum number combinations given below.

a. n= 1, l =0

b. n =2 , l = 0

c. n =2, l =1

d. n =3, l =0

e. n =3, l =1

f. n =3, l =2--

*You have a 1.2 M solution of CaCi, that has a final volume of 0.050 L a.
How many moles of CaCly are generated in the reaction?
b.
How many grams of CaCly are generated in the reaction?

Answers

The number of moles is 0.06 moles while the mass is 6.66 g

What is the mole?

The mole is a unit of measurement used in chemistry to express amounts of a substance. One mole of a substance is defined as the amount of that substance that contains as many entities, such as atoms, molecules, or ions, as there are in 12 grams of carbon-12, which is a common isotope of carbon.

Number of moles = 1.2 * 0.05

= 0.06 moles

Mass of the CaCl2 =  0.06 moles * 111 g

= 6.66 g

The mole is used to make it easier to compare the amounts of different substances in chemical reactions, and to calculate the amounts of reactants needed to produce a certain amount of product.

Learn ,more about mole:https://brainly.com/question/26416088

#SPJ1

A hydrate of sodium carbonate, Na₂CO3, has a mass of 4.31 g before heating. After heating, the mass of the anhydrous
compound is found to be 3.22 g.

What is the mass of water in the original sample?

Answers

A hydrate of sodium carbonate, Na[tex]_2[/tex]CO[tex]_3[/tex] has a mass of 4.31 g before heating. After heating, the mass of the anhydrous compound is found to be 3.22 g.  Therefore, The mass of water in the original sample is 1.09g.

What is sodium carbonate?

Sodium carbonate is an inorganic compound with the formula Na[tex]_2[/tex]CO[tex]_3[/tex], where x may range from 0 and 10. All forms are water-soluble, white, unscented salts that generate alkaline water solutions. It was historically made first from ash of plants grown in sodium-rich soil.

Before heating, a hydrates of sodium carbonate, Na[tex]_2[/tex]CO[tex]_3[/tex], does have a mass of 4.31 g. The weight of the anhydrous salt after heating is determined to be 3.22 g. The original sample contains 4.31-3.22 =1.09g of water.

Therefore, the mass of water in the original sample is 1.09g.

To learn more about sodium carbonate, here:

https://brainly.com/question/28236059

#SPJ9

Consider the molecule below, then identify which changes would produce molecule with the most intense C-C signal in an IR spectrum_ Ha Hb Hc Hd Changing Ha and Hbto Br Changing Ha to F and Hc to Br Changing Ha to Fand Hd to Br Changing Ha to F Changing Ha to and Hbto Br

Answers

Identifying the molecule with the most intense C-C signal in an IR spectrum in the following manner.

Infrared spectroscopy (IR) detects the vibrations of covalent bonds in a molecule. The C-C bond typically absorbs in the mid-infrared (MIR) region, between 1200-800 cm^-1. The intensity of the C-C signal depends on the strength of the bond, the symmetry of the molecule, and the number of C-C bonds present.

Changing Ha and Hb to Br: This substitution will not necessarily increase the strength of the C-C bond or the number of C-C bonds, and may not affect the symmetry of the molecule. Therefore, this change is unlikely to produce a molecule with the most intense C-C signal.

Changing Ha to F and Hc to Br: This substitution will create a fluorine atom on one of the carbons and a bromine atom on another carbon. The electronegativity of fluorine is greater than that of carbon, which may result in a stronger C-C bond. Additionally, the molecule will have two different halogen atoms, which could increase the intensity of the signal due to increased symmetry. Therefore, this change could potentially create a molecule with a more intense C-C signal.

Changing Ha to F and Hd to Br: Similar to the above, this substitution will create a fluorine atom on one of the carbons and a bromine atom on another carbon. The molecule will also have two different halogen atoms, which could increase the symmetry of the molecule and the intensity of the signal. Therefore, this change could potentially create a molecule with a more intense C-C signal.

Changing Ha to F: This substitution will not necessarily increase the strength of the C-C bond or the number of C-C bonds, and may not affect the symmetry of the molecule. Therefore, this change is unlikely to produce a molecule with the most intense C-C signal.

Changing Ha to F and Hb to Br: This substitution will create a fluorine atom on one of the carbons and a bromine atom on another carbon. The molecule will have two different halogen atoms, which could increase the symmetry of the molecule and the intensity of the signal. However, it may not necessarily increase the strength of the C-C bond or the number of C-C bonds. Therefore, this change is less likely to create a molecule with the most intense C-C signal compared to the previous two changes.

Overall, changing Ha to F and Hc or Hd to Br may potentially create a molecule with the most intense C-C signal in an IR spectrum. However, it's important to note that other factors could also impact the intensity of the signal, and that the specific molecule in question needs to be examined to make an accurate prediction.

To know more about IR spectrum here

https://brainly.com/question/29689280

#SPJ4

nitrogen and phosphorous bonding patterns: build each of the indicated molecules below in the simulator and match them to the correct bonding pattern in respect to either nitrogen or phosphorus. remember if a molecule does not have a name when you build it is not a stable arrangement and you might have to reorder your atoms. how do nitrogen and phosphorus tend to bond in compounds? what patterns do you see? how many total covalent bonds do nitrogen and phosphorus atoms tend to form? group of answer choices n2 [ choose ] nh3 [ choose ] nh2cl [ choose ] no [ choose ] hno [ choose ] hcn [ choose ]hps [ choose ] ph3 [ choose ]

Answers

In compounds, nitrogen and phosphorus frequently form covalent bonds to produce bonds. The valence electrons on nitrogen and phosphorus atoms determine how many total covalent bonds they typically form. While phosphorus can make three or five covalent bonds, nitrogen normally only forms three.

What is called nitrogen?

Nitrogen (N), a nonmetallic element belonging to Periodic Table Group 15 [Va]. It is a colorless, flavorless, and odorless gas that makes up the majority of the atmosphere on Earth and is a component of all living things. Nitrogen is a chemical element with the symbol N and atomic number 7. Nitrogen is a nonmetal and the lightest element in the pnictogens, group 15 of the periodic table. It is a common element in the universe and is thought to be the eighth most abundant element overall in the Milky Way and the Solar System.

What is source of nitrogen?

The primary source of nitrogen for atmospheric deposition is the combustion on fossil fuels like coal and oil. Nitrogen may be deposited in the atmosphere as dry particulates, gases, or droplets or as a wet form such as rainfall, snow, hail, fog, or freezing rain. Nitrogen primarily comes from the atmosphere. It is made comprised of this harmless, colorless gas in 78 percent of its composition.

N2: triple bond; three covalent bonds are being formed by nitrogen.

NH3: three single bonds, three covalent bonds being formed by nitrogen.

NH2Cl: nitrogen is making three covalent bonds, two of which are single bonds and one is a double bond.

NO: Nitrogen is making two covalent bonds, one single bond and one double bond.

HNO: nitrogen is making two covalent bonds, one single and one double.

HCN: three covalent bonds are being formed by nitrogen, including one single bond and one triple bond.

HPS: phosphorus is making three covalent bonds, one single bond, two double bonds, and one single bond.

PH3: phosphorus is creating three covalent bonds from three single bonds.

To know more about Nitrogen visit:

https://brainly.com/question/19938608

#SPJ4

which of the following birth outcomes are possible as a result of prenatal exposure to airborne polycyclic aromatic hydrocarbons (pahs)? select all that are true.

Answers

The birth outcomes are possible as a result of prenatal exposure to airborne polycyclic aromatic hydrocarbons is the correct option is e) All of the above.

The birth outcomes that are possible as the  result of the  prenatal exposure to the  airborne polycyclic aromatic hydrocarbons are :

a) Reduced birth length

b) Reduced birth weight

c) Smaller head circumference

d) Shortened gestation

The Prenatal exposure to the PAHs has been connected with the  ADHD that is the  symptoms of the anxiety, the depression and the inattention, and also the behavioral disorders, that are all thought to the related to the deficits in the self - regulation.

To learn more about polycyclic aromatic here

https://brainly.com/question/15060847

#SPJ4

This question is incomplete, the complete question is :

which of the following birth outcomes are possible as a result of prenatal exposure to airborne polycyclic aromatic hydrocarbons (PAHs)? select all that are true.

a) Reduced birth length

b) Reduced birth weight

c) Smaller head circumference

d) Shortened gestation

e) All of the above

Other Questions
Why is there less oxygen in the water near the oceans surface than in the water at lower depths? A. Oxygen is very heavy and sinks to the ocean floor. B. A lot of sea life consumes oxygen at the surface level. C. Most of the photosynthesizing organisms live on the ocean floor. D. Oxygen is absorbed at the surface level but cannot remain there. Explain the meaning of each term within the Arrheniusequation: activation energy, frequency factor, and exponentialfactor. Use these terms and the Arrhenius equation to explainwhy small changes in temperature can result in large changes inreaction rates. "He decided to see more, be more and not spend all his time in the shelter just iving between kills and looking out the door now and then." How does this line from the text show that Brian has embraced his situation? Cite evidence from the text to support your response. the national association of home builders ranks the most and least affordable housing markets based on the proportion of homes that a family earning the median income in that market could afford to buy. data containing the median income($1000s) and the median sale price($1000s) for a sample of 12 housing markets appearing on the list of most affordable markets were subjected to a simple linear regression analysis. the following results were obtained You deposited $100,000 in a margin account and proceeded to buy $150,000 of stock in GRPN. There is a 30% maintenance margin required by your broker. If the price of GRPN falls by 60%, how much cash will your broker require you to send if you are to keep him from selling your positions? What if GRPN falls by 30%? By what percent does GRPN have to fall before you will receive a margin call? If GRPN falls by 60% and you are unable to send any additional cash, what is the minimum fraction of your holdings in GRPN that your broker will liquidate? What was the PRIMARY goal of the foreign policy described in this excerpt?To increase U.S. colonization of AsiaTo prevent the spread of communist influence in AsiaTo end trade sanctions against Asian countriesTo protect U.S. soldiers stationed in Asian countries A person places $6770 in an investment account earning an annual rate of7.6%, compounded continuously. Using the formula V = Pert, where Visthe value of the account in t years, P is the principal initially invested, e is thebase of a natural logarithm, and r is the rate of interest, determine theamount of money, to the nearest cent, in the account after 13 years. Which station will have to be on air longer to broadcast 4 minutes of news, explain? The owners of a computer repair shop want to better formulate strategies, so they are doing a SWOT analysis to understand the strengths and weaknesses within their company and the opportunities and threats of the external environment. These are some of the benefits of doing a SWOT analysis.true/false the graph represents the distribution of the lengths of play times, in minutes, for songs played by a radio station over one hour. a graph shows the horizontal axis numbered 2.6 to x. the vertical axis is unnumbered. the graph shows an upward trend from 2.8 to 3.4 then a downward trend from 3.4 to 4. which statement is true about the songs played during the one-hour interval? a. most of the songs were between 3 minutes and 3.8 minutes long. b. most of the songs were 3.4 minutes long. c. most of the songs were less than 3.2 minutes long. d. most of the songs were more than 3.6 minutes long. I need help with this please. Define a function in c called ExactChange that takes the total change amount in cents and an integer array as parameters. Function ExactChange() calculates the change using the fewest coins and stores the number of each coin type used into the array parameter. Index 0-3 of the array parameter should contain the number of pennies, nickels, dimes, and quarters respectively. Then write a main program that reads the total change amount as an integer input, calls ExactChange(), and outputs the change, one coin type per line. Use singular and plural coin names as appropriate, like 1 penny vs. 2 pennies. Output "no change" if the input is 0 or less. What is the value of 10 lakh in usd? What is the ICD-10 code for right side Headache? What is the ICD-10 code for vaginal bleeding? 1. Find the 15th term in the sequence if a1= 3 and d= 42. Find Sn for the arithmetic series where a1= 5, an= 119, n= 203. Find Sn for the arithmetic series where a1= 12, d= 6, n= 154. Find the 6th term in the geometric sequence where a1= 2, a6= 64, r= 25. Find Sn for the geometric series where a1= 2 , r= 4, n= 6 Please read the case below about the development of Post-it Notes. Compare this to the material in the textbook related to the strategic management process (Learning Objective 2-6) before proceeding to answer the questions following the case.Arthur Fry and Spencer Silver: Post-it Notes 3MThis is the story of the creation of the Post-it Note. You might think, given its commercial success, that researchers were burning the midnight oil to find a way to leave clingy notes in books and on memos. But that is not what happenedIn 1968, Dr. Spencer Silver, a senior chemist in 3Ms central research lab, developed a high-quality adhesive that could be easily peeled off the surfaces to which it was adhered. This particular discovery was not considered a great success, since the real goal of Silvers project was to develop a super-strong adhesive, but instead he had found a rather weak one. So, Silver moved on to look at other materials for use as a powerful adhesive.Five years later, Arthur Fry, an avid collaborator in 3Ms research lab and a singer in his local church choir, was frustrated by how his bookmarks always slipped out when opening the hymnals. He suddenly remembered an old presentation by Silver in which Silver mentioned trying to find a promising commercial use for his removable adhesive. The next morning, Fry made some prototype sticky bookmarks that worked wonderfully for his problem. Fry then wrote up a proposal to develop a reusable, reliable, and adhesive bookmark and presented it to his supervisors. Frys managers were hesitant at first, but 3Ms culture of innovation led his supervisor to give Fry a chance to develop his idea. Fry created more samples, giving them to colleagues at work and fellow singers in the choir. Almost everyone kept asking Fry for more samples! Even then, it took several more years of design and manufacturing work to bring the Post-it Note to fruition. By 1977, the product was fully developed and functional, but it still took another two years to gain broader acceptance. In 1979, after implementing a massive consumer sampling, the product became widely available in the U.S. Within two years, it had become so indispensible that no office supply list was complete without Post-it Notes. For Drs. Silver and Fry, it was a wonderful addition to their long and productive careers with 3M. Both have been awarded 3Ms highest honors in research, as well as a number of prestigious engineering awards across the globe.It should be noted that 3M is well known for fostering innovation. It lets its employees dedicate 15 percent of their time to pursuing projects that might be good potential innovations for the firm. In great part, this culture is what led to the Post-it Notes success. A less open firm would simply have shut the project down. There were certainly many times during the 10 years of development where the idea could have been abandoned. One interesting point to consider from this story is not how firms allow serendipitous moments to grow into successful innovations, but how firms should promote such serendipity to begin with.1.In the case of Post-it Notes, the primary strategic process described came from which of the following?Dominant strategic planScenario planningTop-down strategic planningPlanned emergenceIntended strategy is sf6 polar or nonpolar What happened to The Act Man's channel? As the number of covalent bonds between two atoms increases, the strength of thebond between them _____ and the distance between the atoms _____.A) is unpredictableB) increases, decreasesC) decreases, increasesD) increases, increasesE) decreases, decreases