Projectiles must therefore travel at a speed of at least 8000 meters per second in order to form an or satellite.
How do you define a speed simple?The direction of motion of a body as well as object is determined by its velocity. Speed is essentially a scalar quantity. In actuality, velocity is an vector quantity. What it is is the rate of change of distance. It gauges how quickly the displacement is changing.
What, in physics, is speed, and what is its unit?The rate at which distance and time change is what is meant by speed. It has the aspect of temporal and spatial distance. The mix of the fundamental units of distance and time is what is described also as SI unit of speed. As a result, our Si system of speed is the meter per second.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ4
Define east as the negative direction and west as the positive direction. Which of the following statement is FALSE?
a) If a car is traveling east, its acceleration must be eastward.
b) If a car is slowing down, its acceleration may be positive
c)An object with constant nonzero acceleration can never stop and stay stopped
d)The velocity of a car must stop momentarily if it has to change direction
Define east as the negative direction and west as the positive direction. The false statement is:
a) If a car is traveling east, its acceleration must be eastward.
About Acceleration
Acceleration is a change in speed per unit time. This acceleration is a vector quantity that has both magnitude and direction.
Acceleration is also divided into decelerated acceleration and accelerated acceleration.
Acceleration is decelerated which means that the direction of acceleration is opposite to the direction of velocity.
Meanwhile, the acceleration is accelerated, which means the acceleration is in the same direction as the speed.
Acceleration will be negative if the speed of an object can decrease within a certain time interval.
While the acceleration which is positive will increase over a certain time interval.
Learn more about acceleration at https://brainly.com/question/2303856.
#SPJ4
a commuter backs her car out of her garage with a constant acceleration of 1.2 m/s2. assume that her initial motion is in the positive direction.
A) It will take 1.53 seconds does it take her to reach a speed of 2.00 m/s.
B) If she then brakes to a stop in 0.8 second, her (constant) deceleration is -2.5 m/s^2.
Acceleration:
Acceleration is a vector because it must be specified as magnitude along with direction. One-dimensional motion uses negative and positive signs to indicate direction. So if the sign is negative, the object is slowing down.
Deceleration:
Deceleration is the opposite of acceleration. Deceleration is calculated by dividing the final velocity minus the initial velocity by the time it takes for this velocity to drop. Here the acceleration formula can be used with a negative sign to determine the deceleration value.
(A) Here the car's initial velocity (u) is 0 m/s as it is at rest and the final velocity (v) is 2 m/s. The acceleration (a) of the car is 1.30 m/s^2. Use the first equation of motion to get the time taken (t).
v = u + at
⇒ 2m/s = 0 m/s + (1.30m/s²) t
⇒ t = [tex]\frac{2m/s}{1.30m/s^2}[/tex]
⇒ t = 1.53 second
(B) For this the car's initial velocity (u) is 2 m/s as it is in motion and the final velocity (v) is 0 m/s. The time taken (t) to reach the final velocity is 0.8 s. Use the first equation of motion to get acceleration (a).
v = u + at
⇒ 0 m/s = 2 m/s + a(0.8s)
⇒ a = [tex]\frac{(0-2)m/s}{0.8s}[/tex]
⇒ a = -2.5 m/s²
Learn more about Declaration:
https://brainly.com/question/14612102
#SPJ4
When you accelerate to avoid a collision, which step in the ipde process are you using?
"Executive" is the step in the IPDE process you are using to accelerate to avoid a collision. The IPDE process contains four steps.
What is the IPDE Process?IPDE process is an approach stand for Identify, Predict, Decide, and Execute. To deal with potential and real hazards while driving, we employ the IPDE approach. The IPDE process contains four steps, those are:
1. Identify
Identify means that a driver must look ahead and locate a hazard (such as traffic lights or children) and pay close attention to them. Which is why car's windows must be clean.
2. Predict
Predict is when a driver foresees where points of conflict can develop in a driving situation. A driver must predict what will happen if he comes across a real or potential hazard.
3. Decide
A driver must decide exactly what they will do to drive safely and avoid the hazards. This involves carefully planning the actions and ensuring that the path is clear to proceed.
4. Execute
Execute is when you accelerate to avoid a collision. The decision is carried out by a driver.
Here to learn more about IPDE Process:
https://brainly.com/question/2624496
#SPJ4
determine the pressure of the gas if the atmospheric pressure is 98.4 kpa and the height of the manometer reads 330 mm.
The pressure of the gas if the atmospheric pressure is 98.4 kpa and the height of the manometer reads 330 mm is 408mm Hg.
In the physical sciences, pressure is defined as the stress at a point within a confined fluid or the perpendicular force per unit area. A 42-pound box with a bottom area of 84 square inches will impose pressure on a surface equal to the force divided by the area it is applied to, or half a pound per square inch. Atmospheric pressure, which is roughly 15 pounds per square inch at sea level, is the weight of the atmosphere pressing down on each unit area of the Earth's surface. Pascals are used to express pressure in SI units; one pascal is equivalent to one newton per square metre. Nearly 100,000 pascals of atmospheric pressure are present.
Given [tex]P_{atm}[/tex]= 98.4KPa = 738mm Hg
Difference in height of Hg coloum= 330 mm
[tex]P_ {column}[/tex]= 330 mm Hg
Pressure in gas= [tex]P_{atm}[/tex] -[tex]P_{manometer}[/tex]
Pressure of gas = 738mm Hg -330mm Hg
Pressure of gas=408mm Hg
Learn more about pressure
brainly.com/question/30002249
#SPJ4
which of the following is not a property of electric field lines? multiple choice question. they can cross each other. the electric field is strongest where the lines are closest. they start on positive charges. they end on negative charges
The statement "they can cross each other" is not a property of electric field lines.
Electric field lines are a graphical representation of the electric field. They are used to visualize the electric field and to understand the behavior of electric charges. Electric field lines originate from positive charges and end on negative charges, representing the direction of the electric field. The electric field is strongest where the lines are closest, meaning that the electric field is stronger in regions where the lines are packed tightly together. This is because the electric field is proportional to the number of lines per unit area. However, electric field lines cannot cross each other. This is because the electric field must always be a continuous and well-defined quantity, and if the lines cross each other, it would be ambiguous as to the direction of the electric field in that region.
Learn more about electric field lines here: brainly.com/question/14438235
#SPJ4
Consider the collision between the moving cue ball and the red 15 ball that is at rest on the table pool. All but one statement describes what occurs when the cue ball collides with the 15 ball,.
According to Newton's laws, the ball is subject to equal forces directed in opposite directions.
A collision is when an object collides with another object. Collisions are described by the law of conservation of linear momentum, which states that momentum is neither created nor destroyed. Collision (also called impact), in physics, is the sudden and violent collision of two bodies in direct contact. B. Two billiard balls, a golf club and a ball, a hammer and a nail head, his two trains linked together, or a falling object and the floor. The question cannot be fully answered because the question is incomplete. However, according to Newton's laws, the ball is subject to equal forces directed in opposite directions.
Learn more about collision
brainly.com/question/29308013
#SPJ4
What voltage is applied to a 20 ohm fixed resistor if the current through the resistor is 1. 5 amps?
The voltage applied to a 20 ohm resistor can be calculated using Ohm's Law. Ohm's Law states that the voltage (V) is equal to the current (I) multiplied by the resistance (R), which can be represented by the equation V = IR.
To find the voltage applied to a 20 ohm resistor with a current of 1.5 amps, we simply substitute the values into the equation: V = 1.5 * 20 = 30 Volts. [1]. The result, 30 Volts, is the voltage applied to the 20 ohm resistor when the current through the resistor is 1.5 amps.
Find out more about Voltage
brainly.com/question/27474964
#SPJ4
what is the nature of the force between balls a and b?
Considering how enticing both charges are. Only when applied over very small distances and at the level of subatomic particles do the weak and strong forces take control.
What does a scientific force mean?A clear meaning is attached to the word "force." The terms "push" and "pull" are perfectly acceptable at this level to describe forces. An object does not contain any force inside of it either within it. Other element applies pressure to the first.
How would you describe force to a young child?A push or pull constitutes a force. The motion of an item can occasionally be changed by forces, which also generate motion. Every object is drawn toward the center of the Earth by gravity, for instance.
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ4
positive charge of q coulombs is uniformly spread over a large flat surface of area 8.43 meters squared. what would q need to be to make the magnitude of the electric field 0.00562 meters away from the surface equal to 5.85 n/c?
q would need to be 3.26 x 10^-7 Coulombs to make the magnitude of the electric field 0.00562 meters away from the surface equal to 5.85 n/C.
The magnitude of the electric field at a point near a flat charged surface is given by:
E = Q / (4 * pi * epsilon_0 * A)
where E is the electric field magnitude, Q is the charge, epsilon_0 is the vacuum permittivity, A is the area of the charged surface, and d is the distance from the surface.
We can rearrange the equation to solve for Q:
Q = E * (4 * pi * epsilon_0 * A)
Plugging in the given values:
Q = 5.85 nC * (4 * pi * 8.85 x 10^-12 C^2/N m^2 * 8.43 m^2)
Q = 3.26 x 10^-7 C
Learn more about vacuum permittivity here: brainly.com/question/14803460
#SPJ4
4. Assuming that this is a perfect inelastic
collision, calculate the velocity after the
collision in the example below.
BEFORE
m-80 kg
v=6 m/s
m= 40 kg
v=0 m/s
AFTER
m-80 kg
V=?
m 40 kg
V=?
Answer: 72
Explanation: just cuz
How much work must be done to stretch this spring by 0. 050 m from its unstretched length?
Work done to stretch the string is 0.039 J.
Given F = [tex]kx - bx^{2} +cx^{3}[/tex]
Where, k = 100 N/m
b = 700 N/m^2
c = 12000 N/m^3
We know that , W = Fx
where, F = force and x = displacement
Taking integrals on both sides we get:
W = [tex]\int\ {F} \, dx[/tex]
W = [tex]\int\ {kx - bx^{2} + cx^{3} } \, dx[/tex]
Integrating under proper limits we get:
W = [tex]\frac{kx^{2}}{2} - \frac{bx^{3}}{3} +\frac{cx^{4}}{4}[/tex]
Given x = 0.05 m
Putting these values in above equation we get:
W = 0.39 J
Work is the product of the component of the force in the direction of the displacement and the magnitude of this displacement.
To know more about work visit:
https://brainly.com/question/15218451
#SPJ4
if this connection is maintained for 1.5 min , how much energy is transferred to the dead battery?
a) The car with the dead battery is the one that has its battery being charged by the other car.
b) The amount of energy transferred to the dead battery can be calculated as follows:
Energy = Voltage * Current * Time
Since the current is 30A and the time is 1 minute (60 seconds), the energy transferred can be calculated as:
Energy = Voltage * 30A * 60s = Voltage * 1800 C
learn more about energy at:
brainly.com/question/1932868
#SPJ4
what is the energy stretching vibration transition per molecule
The energy stretching vibration transition per molecule is [tex]1.15 * 10^{-20} J[/tex]
Plank's constant (h) and the frequency of the transition are multiplied to get the energy of the stretching vibration transition per molecule (f). As a result, each formaldehyde molecule's energy for the C-O stretching vibration transition is equivalent to:
Energy = h * f
[tex]= 6.626 *10^{-34} J * s * 1750cm^{-1} \\\\= 1.15 *10^{-20} J[/tex]
Therefore ,Each molecule's energy-stretching vibration transition is[tex]1.15 * 10^{-20 }J[/tex]
Raman is a great method for these kinds of compounds since the stretching vibrations of these groups are characterised by strong Raman bands. The IR absorptions' intensity might vary. Variable IR intensities are the result of the double bond stretching vibrations. Between 1680 and 1600 cm-1 are where the majority of olefin Cdouble bondC stretching bands are found.
learn more about Plank's constant Refer: brainly.com/question/28168181
#SPJ4
where might you see remote controls with each type of battery arrangement
The batteries in a remote control aeroplane are typically set up in parallel to maximise the current. Remote controllers with both series and parallel battery configurations may be employed in a number of settings.
The majority of remote controls use AAA and AA batteries. Manufacturers frequently sell these items with subpar, weak zinc carbon batteries that quickly lose their charge. Because the batteries in a TV remote are connected in series, the device will not function if one cell is dead or missing. A battery is a collection of at least two cells. The arrangement of the cells should be such that the positive terminal of one cell is coupled with the negative terminal of the following cell.
To learn more about battery click here https://brainly.com/question/19225854
#SPJ4
who coined the term psychophysics
The term "psychophysics" was coined by German psychologist and philosopher Gustav Fechner in the mid-19th century.
He introduced the concept in the mid-19th century as a way to quantify and study the relationship between physical stimuli and their psychological effects. Fechner is considered to be the founder of psychophysics, and his work laid the foundation for the development of this field of study. Psychophysics aims to understand the perception of stimuli and how it is related to the physical properties of the stimuli, such as their intensity, duration, and frequency. Psychophysics is a subfield of psychology that deals with the relationship between physical stimuli and their psychological effects. It aims to quantify the relationship between the physical properties of stimuli, such as intensity, duration, and frequency, and the subjective experiences of those stimuli, such as sensation, perception, and response.
To know more about psychophysics please refer: https://brainly.com/question/13602570
#SPJ4
When removing a wool sweater, a static discharge of 7.00 µc dissipates 1.00 ✕ 10−3 j of energy. what voltage (in v) was involved?
The required voltage while a static discharge dissipates certain amount of energy is calculated to be 142.85 V.
The voltage is also defined as the ratio or the fraction of the energy measured in joules to the per-unit charge measured in Coulomb.
The energy is given as 1× 10⁻³ J.
The charge q is given as q = 7 µc = 7× 10⁻⁶ c
The expression for energy is given as,
E = q v
where, E is energy
v is voltage
q is charge
Making v as subject, we have,
v = E/q = (1× 10⁻³)/(7× 10⁻⁶) = 1000/7 = 142.85 V
Thus, the voltage in volts is calculated as 142.85 V.
To know more about voltage:
https://brainly.com/question/28021065
#SPJ4
a sphere has a net charge of -4.8 x 10-17 c. how many excess electrons are there on the sphere?
The relationship between charge, number of electrons, and charge per electron, we can calculate the number of excess electrons on the sphere. In this case, the calculation shows that there are [tex]3 x 10^18[/tex] excess electrons on the sphere.
The number of excess electrons on the sphere can be calculated as follows:
charge = number of electrons * charge per electron
Rearranging this equation and substituting the given values:
number of electrons = charge / charge per electron = [tex]-4.8 x 10^-17 C / (1.6 x 10^-19 C/electron) = -3 x 10^18[/tex] electrons
Since the sphere has a net charge of [tex]-4.8 x 10^-17 C[/tex], there are[tex]3 x 10^18[/tex]excess electrons on the sphere.
A sphere is a three-dimensional object with a uniform distribution of charge. The total charge on the sphere is determined by the number of electrons it contains and their individual charges. In this case, the sphere has a net charge of [tex]-4.8 x 10^-17 C[/tex], meaning that it has an excess of electrons compared to protons.
The charge per electron is a constant value, equal to[tex]1.6 x 10^-19 C[/tex]. This means that for every electron, there is a charge of [tex]1.6 x 10^-19 C[/tex]associated with it.
To learn more about electrons please click on below link.
https://brainly.com/question/1255220
#SPJ4
explain why you will hear two taps when your friend taps the fence
You will hear two taps when your friend taps the fence because the sound wave created by tap travels through the fence and into the air. When the sound wave reaches your ear, then you will hear the first tap.
Why you hear two taps when your friend taps the fence?When your friend taps the fence, you will hear two taps because the sound wave created by the tap travels through fence and into the air. When sound wave reaches your ear, you will hear the first tap.
The sound wave then continues to travel through fence and reflects back towards your ear, creating second tap. This is known as echo. The time between the two taps depends on distance the sound wave has to travel, density of the fence material, and other factors that can affect speed and reflection of the sound wave.
To know more about sound waves, refer
https://brainly.com/question/1199084
#SPJ1
Pleae compare and contrat a wind vane and an anemometer. Be ure to include what they each meaure, how doe each one work, and what information meteorologit collect from the wind vane and a anemometer
A wind vane and an anemometer are both instruments used to measure wind speed and direction.
A wind vane measures wind direction by pointing in the direction from which the wind is coming. It typically consists of a lightweight vane attached to a pivot that rotates to align with the wind direction. The wind vane can provide information about the general trend of wind direction but does not provide information about wind speed.
An anemometer, on the other hand, measures wind speed. There are several types of anemometers, but the most common type consists of four cups or vanes attached to a central rotating shaft. As the wind blows, it turns the cups or vanes, and the speed at which they rotate is proportional to the wind speed. The speed can then be measured using an attached mechanism, such as a dial or digital readout.
Meteorologists use the information provided by wind vanes and anemometers to understand the patterns and behavior of wind in a given location. Wind direction and speed are important factors in weather forecasting and the study of atmospheric processes.
To know more about wind vane refer to:
brainly.com/question/1233657
#SPJ4
f the enthalpy of steam at 45 degrees celsius is 2100 kj/kg, what is its entropy in
The entropy of steam at 45 degrees celsius is [tex]6.744 kj/kgK.[/tex]
This can be calculated from the steam tables, which contain the thermodynamic properties of steam at various pressures and temperatures. It is a thermodynamic property that describes the amount of energy that is unavailable to do work. The entropy is calculated from the enthalpy and temperature of the steam. In this case, the enthalpy of 2100 kJ/kg and the temper
ature of 45 degrees celsius are used to calculate the entropy. The equation used to calculate the entropy is:
[tex]S =\frac{ H}{T}[/tex]
Where S is the entropy, H is the enthalpy and T is the temperature.
Therefore,
[tex]S = \frac{2100}{45}\\ \\ = 46.67 kJ/kgK.[/tex]
Therefore, the entropy of steam at 45 degrees celsius is [tex]6.744 kJ/kgK[/tex]
learn more about entropy refer:brainly.com/question/17278266
#SPJ4
complete question:IF the enthalpy of steam at 45 degrees celsius is 2100 kj/kg, what is its entropy in kj/kgK
the charge imbalance that results from this movement of charge will generate an additional electric field in the region within the rod. in what direction will this field point? view available hint(s)for part d the charge imbalance that results from this movement of charge will generate an additional electric field in the region within the rod. in what direction will this field point? it will point to the right and enhance the initial applied field. it will point to the left and oppose the initial applied field.
The direction of the additional electric field generated by the charge imbalance in a rod will depend on the direction of the charge movement.
If the charge movement results in a positive charge buildup on one side of the rod, the additional electric field will point in the opposite direction, opposing the initial applied field. If the charge movement results in a negative charge buildup on one side of the rod, the additional electric field will point in the same direction, enhancing the initial applied field. Understanding these basic principles is important for advancing in the field of electromagnetism and for understanding the behavior of charged particles in various electrical and electronic systems.
Learn more about electric field at : https://brainly.com/question/15800304
#SPJ4
What is the net of a force?
The vector sum of all forces exerted on an object is the net force. A force is a vector and that two forces of equal magnitude and opposite direction will cancel each other out, the net force is the sum of all the forces.
Is there no net force?The vector sum of all forces exerted on an object is the net force. The net force exerted on an object is zero when it is in equilibrium (at rest or moving at a constant velocity). If all of a vector's components are zero, it can only have a magnitude of zero.
What is the formula for net force?The acceleration of the object will be greater the greater the net force acting on it. These connections are summarized by Newton's second law of motion. Rewriting the above acceleration equation to account for net force yields the following solution: Mass times acceleration equals net force, or F = m/a.
Learn more about net force:
brainly.com/question/14361879
#SPJ4
a sprinter runs at 9.2 m/s around a circular track with a centripetal acceleration of 3.8 m/s2. what is the radius of the track?
The required radius of the track when velocity of the sprinter is given is calculated to be 22.27 m.
Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any object travelling in a circle with an acceleration vector pointing in the direction of the circle's centre.
The velocity of the sprinter v = 9.2 m/s
Centripetal acceleration a is given as 3.8 m/s²
Radius of the track = ?
The expression for centripetal acceleration is:
a = v²/r
Making radius as subject,
r = v²/a = (9.2)²/3.8 = 22.27 m
Thus, the radius of the track is calculated to be 22.27 m.
To know more about centripetal acceleration:
https://brainly.com/question/29853676
#SPJ4
when an object gets charged by rubbing, where does the electric charge originate?
The transmission of electrons from one item to another occurs during rubbing. When electrons are transferred from a body, that body loses electrons and gains a positive charge.
What happens when rubbing charges an object?
Friction is the movement of electrons between two things when they are brushed against one another. When a thing loses an electron, it becomes positively charged; when it gains an electron, it becomes negatively charged.
What is electron transmission?
A technique used to examine the features of incredibly small objects is transmission electron microscopy (TEM). A scientist can see features like structure and morphology using the technology, which involves an accelerated electron beam that passes through a very thin specimen.
The primary distinction between SEM and TEM is that the former produces images by detecting reflected or knocked-off electrons, whereas the latter produces images by using transmitted electrons (electrons that are traveling through the material).
Learn more about transmission of electrons
brainly.com/question/28804998
#SPJ4
What is the velocity of a 16.3 kg car moving with 85 J of energy?
Answer:
Velocity is 10.429 m/s
Explanation:
Assume a car is moving from rest at point A to point B through a distance r.
We know that workdone is product of force and distance moved;
[tex]{ \bf{ \triangle w = f \triangle r}} [/tex]
- Integrating both sides;
[tex] { \bf{ \int \triangle w = f \int^{r_{2}}_{r_{1} } \triangle r}} \\ \\ { \bf{w = (ma) \{r _{2} - r _{1} \}}} \\ \\ { \bf{w = (m \times \frac{ {v}^{2} }{2r}) \times (r) }}[/tex]
The step above comes from Newton's third law, where initial velocity is zero, since car is from rest, and r1 is zero
[tex]{ \bf{w = (m \times \frac{ {v}^{2} }{2}) \times \frac{r}{r} }} \\ \\ { \boxed{ \rm{workdone = \frac{1}{2}m {v}^{2} }}}[/tex]
Therefore;
[tex]{ \rm{85 = \frac{1}{2} \times 16.3 \times {v}^{2} }} \\ \\ { \rm{ {v}^{2} = \frac{2 \times 85}{16.3} }} \\ \\ { \rm{v = \sqrt{( \frac{2 \times 85}{16.3} } )}} \\ \\ { \rm{v = 10.429 \: ms {}^{ - 1} }}[/tex]
all the following statements are true. which one explains the reason that there is not a solar eclipse at every new moon?
It takes the moon about a month to orbit the Earth. We would experience two eclipses each month if the moon's orbit was in the same plane as the ecliptic, which is Earth's orbital plane. Thus, option C is correct.
What absence of solar eclipse at every new moon?At every full moon, the moon would be eclipsed. About a week later, there would be a solar eclipse with the new moon as well, bringing the yearly total of eclipses to at least 24.
But it doesn't, and the reason is that by around 5 degrees, the moon's orbit around Earth is inclined to that of the Earth around the sun.
Doesn't the fact that a new moon happens when the moon is between the earth and the sun also imply that a solar eclipse will occur somewhere on Earth.
Therefore, The orbital plane of the Moon is tilted slightly (by about 5 degrees) to the ecliptic plane.
Learn more about solar eclipse here:
https://brainly.com/question/17749647
#SPJ4
The given question is incomplete. The complete question is given below:
All the following statements are true. Which one explains the reason that there is not a solar eclipse at every new moon?
A.) The Moon is only about 1/4 as large as Earth in diameter.
B.) The Moon goes through a complete cycle of phases about every 29 1/2 days.
C.) The orbital plane of the Moon is tilted slightly (by about 5 degrees) to the ecliptic plane.
D.) The nodes of the moon's orbit precess with an 18-year period.
It takes the moon about a month to orbit the Earth. We would experience two eclipses each month if the moon's orbit was in the same plane as the ecliptic, which is Earth's orbital plane. Thus, option C is correct.
What absence of solar eclipse at every new moon?At every full moon, the moon would be eclipsed. About a week later, there would be a solar eclipse with the new moon as well, bringing the yearly total of eclipses to at least 24.
But it doesn't, and the reason is that by around 5 degrees, the moon's orbit around Earth is inclined to that of the Earth around the sun.
Doesn't the fact that a new moon happens when the moon is between the earth and the sun also imply that a solar eclipse will occur somewhere on Earth.
Therefore, The orbital plane of the Moon is tilted slightly (by about 5 degrees) to the ecliptic plane.
Learn more about solar eclipse here:
brainly.com/question/17749647
#SPJ4
The given question is incomplete. The complete question is given below:
All the following statements are true. Which one explains the reason that there is not a solar eclipse at every new moon?
A.) The Moon is only about 1/4 as large as Earth in diameter.
B.) The Moon goes through a complete cycle of phases about every 29 1/2 days.
C.) The orbital plane of the Moon is tilted slightly (by about 5 degrees) to the ecliptic plane.
D.) The nodes of the moon's orbit precess with an 18-year period.
Earth carries a net charge of about -5×10−5 C. How many more electrons are there than protons on Earth?
Earth carries a net charge of about -5×10−5 C. 10 and many more electrons are there than protons on Earth.
What is electron?
It is possible for an atom to have an attached or detached electron, a negatively charged subatomic particle (not bound). The electron, along with protons and neutrons, is one of the three main particle types found inside an atom. Atomic nuclei are composed of protons, neutrons, and electrons.
What is proton?
In the nucleus of every atom, there is a proton, a subatomic particle. Though going in the opposite direction from the electron, the particle has a positive electrical charge. The mass of an isolated proton, which is almost equal to that of a neutron, is just 1.673 x 1027 kg.
Therefore, earth carries a net charge of about -5×10−5 C. 10 and many more electrons are there than protons on Earth.
Learn more about electrons from the given link.
https://brainly.com/question/13998346
#SPJ4
the tanker jet is flying at a constant speed of 360 km/hr and initially 10 km ahead of the receiver jet. the receiver jet is initially flying at a speed of 360 km/hr and needs to catch up with the tanker jet. the receiver jet can accelerate and decelerate at a maximum magnitude of 1.05g, where g is the gravitational acceleration and equals 9.8 m/sec/sec. determine the minimum amount of time, in seconds, taken by the receiver jet to catch up with the tanker jet. write your answer rounded to the closest second.
The minimum amount of time taken by the receiver jet to catch up with the tanker jet is 100 seconds, rounded to the nearest second.
Let's assume that the receiver jet accelerates at the maximum rate (1.05g) until it reaches the same speed as the tanker jet, and then coasts for the rest of the journey.
The time taken for the receiver jet to reach the same speed as the tanker jet can be calculated using the following formula:
t = v / a
where
v = final speed - initial speed
a = acceleration (1.05g)
The initial speed of the receiver jet is 360 km/hr = 100 m/s. The final speed is the same as the tanker jet, which is 360 km/hr = 100 m/s.
So, v = 100 m/s - 100 m/s = 0
a = 1.05 * 9.8 m/s^2 = 10.29 m/s^2
t = v / a = 0 / 10.29 m/s^2 = 0 s
Since the receiver jet reached the same speed as the tanker jet in zero seconds, it will continue to fly at a constant speed of 100 m/s for the rest of the journey. The distance that the receiver jet needs to cover can be calculated as follows:
d = v * t
where
v = 100 m/s (speed of the receiver jet)
t = time taken to cover the distance (to be calculated)
Since the tanker jet was initially 10 km ahead of the receiver jet, the distance that the receiver jet needs to cover is 10 km = 10,000 m.
t = d / v = 10,000 m / 100 m/s = 100 s
So, the minimum amount of time taken by the receiver jet to catch up with the tanker jet is 100 seconds, rounded to the nearest second.
Learn more about acceleration here: brainly.com/question/12550364
#SPJ4
A 20 kN2 resistor is connected in series with an initially uncharged 100 uF capacitor and a 5 V battery. What is the charge on the capacitor when the circuit has reached steady state? A.5* 10 C B.2.5 * 10' C.2.5 * 10°C D.5* 10*C
The required charge on the capacitor obtained is 5 x 10^-4C when a 20 kN2 resistor is connected in series with an initially uncharged 100 uF capacitor and a 5 V battery.
Given the resistance of resistor (R) = 20kN^2
The capacitance of uncharged capacitor (C) = 100uF
The voltage of battery (V) = 5V
Let the charge on the capacitor = q
We are aware that a capacitor will not pass current in steady state and will instead behave like an open circuit.
We know that from Ohms law the charge on the required capacitor is calculated as: q = CV
Then, q = 100 x 10^-6 x 5
q = 5 x 10^-4C
Hence the required charge on the capacitor obtained is 5 x 10^-4C
To learn more about resistor click here https://brainly.com/question/24297401
#SPJ4
What is the direction of the electric field at the dot?a. Ab. Bc. Cd. De. None of the above
Option E. The direction of the electric field at the dot in the diagram is "None of the above." Electric field lines are used to represent the direction of the electric field and the magnitude of the field is proportional to the density of the lines.
The diagram you provided does not have enough information to determine the direction of the electric field at the dot, as the electric field lines have not been shown. In order to determine the direction of the electric field at a point, you would need a complete representation of the electric field in the region, including the electric field lines and any charges that are causing the field. the electric field is a field that describes the force experienced by a charged particle due to the presence of other charged particles or electric charges. The electric field is represented by electric field lines, which are lines that show the direction of the electric field at any given point.
To learn more about electric field please click on below link.
https://brainly.com/question/8971780
#SPJ4
What is the direction of the electric field at the dot?
a. A
b. B
c. C
d. D
e. None of the above