Determine the centroid of the shaded area shown in figure 2. Determine the moment of inertia about y-axis of the shaded area shown in figure 2

Answer:

A

  [tex]\epsilon_{max} = 0.774 \ V[/tex]

B

[tex]wt = 0^o[/tex]

Explanation:

From the question we are told that

   The  length of the side is  [tex]l = 16.0 \ cm = 0.16 \ m[/tex]

    The  number of turns is  [tex]N = 29 \ turns[/tex]

    The  magnetic field is  [tex]B = 83.0 mT = 83 *10^{-3} \ T[/tex]

    The  angular speed is  [tex]w = 1.20 * 10^2 rev/min = \frac{1.20 *10^2 * 2\pi}{60 } = 12.6 \ rad/s[/tex]

Generally  the area is  [tex]A = l^2[/tex]

Generally the induced emf is mathematically represented as

         [tex]\epsilon = N * w * B * A * cos(wt)[/tex]

At maximum  [tex]cos(wt) = 1[/tex]

    So

       [tex]\epsilon_{max} = N * w * B * A[/tex]

       [tex]\epsilon_{max} = 29 * 12.6 * 83*10^{-3}* (l^2)[/tex]

=>   [tex]\epsilon_{max} = 29 * 12.6 * 83*10^{-3}* ((0.16)^2)[/tex]

=>  [tex]\epsilon_{max} = 0.774 \ V[/tex]

At maximum emf

      [tex]cos (wt) = 1[/tex]

=>   [tex](wt) = cos^{-1} (1)[/tex]

=>   [tex]wt = 0^o[/tex]

Answer:

Resistance =330 Ω

Tolerance = 33 Ω

Explanation:

see attached resistor color code table

The first stripe is orange, which means the leftmost digit is a 3.

The second stripe is orange , which means the next digit is a 3.

The third stripe is brown.  Since brown is 1, it means add one zero to the right of the first two digits.

The resistance is:

orange-orange-brown=  330 Ω

The tolerance is:

The fourth color band indicates the resistor's tolerance.  Tolerance is the percentage of error in the resistor's resistance.

silver is 10%

A 330 Ω resistor has a silver tolerance band.  

Tolerance = value of resistor x value of tolerance band

= 330 Ω x 10% = 33 Ω

330 Ω stated resistance +/- 33 Ω tolerance means that the resistor could range in actual value from as much as 363 Ω to as little as 297 Ω.

The resistance of the resistor is 330 Ω and the tolerance is within  363 Ω and 297 Ω

In physics, resistor's resistance is coded using colors.

Orange colors are coded as 3

The  brown color is coded as 0

The silver color determines the tolerance and silver means 10%

The resistor with four colored stripes in the following order: orange, orange, brown has a resistance value of 330 Ω

Tolerance = 330 × 10%

Tolerance = 33Ω

Resistor value = 330±33

Resistor value = (330+33) and (330-33)

Resistor value = 363 Ω and 297 Ω

Hence the resistance of the resistor is 330 Ω and the tolerance is within  363 Ω and 297 Ω

Learn more here: https://brainly.com/question/18829138

Answer:

C)It would require more energy to change solid water into liquid water because there are more molecules in this larger piece of ice.

Explanation:

c. it would require more energy to change ........

Total distance: 56 meters. Magnitude and direction of displacement: 20 meters South.

Explanation:

The term distance refers to space between one point and other, or the total space a body or object covered while moving. In the case presented, this can be calculated by adding the partial distances given. This means the total distance is  56 meters as 26 meters + 18 meters + 12 meters = 56 meters.

On the other hand, displacement considers the distance from the initial position to the final position, and the direction of movement. This means partial distances should not be added but each movement should be considered according to the direction. The process is shown below:

-The first movement was 26 meters southward; this means by the end of this movement the distance between the initial position was 26 meters south.

- The second movement was 18 northward; this means the kayaker moved 18 meters towards the position. This changes the displacement to 8 meters South as 26 meters south - 18 meters north = 8 meters to the South.

-The last movement was 12 meters sound; this means the kayaker increased the distance from the original position 8 meters to the South + 12 meters to the South = 20 meters South (total displacement.)

Explanation:

Given that,

Length of gold wire, l = 4 m

Voltage of battery, V = 1.5 V

Current, I = 4 mA

The resistivity of gold, [tex]\rho=2.44\times 10^{-8}\ \Omega-m[/tex]

Resistance in terms of resistivity is given by :

[tex]R=\dfrac{\rho l}{A}[/tex]

Also, V = IR

So,

[tex]\dfrac{V}{I}=\dfrac{\rho l}{A}[/tex]

A is area of wire,

[tex]\dfrac{V}{I}=\dfrac{\rho l}{\pi r^2}[/tex], r is radius, r = d/2 (diameter=d)

[tex]\dfrac{V}{I}=\dfrac{\rho l}{\pi (d/2)^2}\\\\\dfrac{V}{I}=\dfrac{4\rho l}{\pi d^2}\\\\d=\sqrt{\dfrac{4\rho l I}{V\pi}} \\\\d=\sqrt{\dfrac{4\times 2.44\times 10^{-8}\times 4\times 4\times 10^{-3}}{1.5\times \pi}} \\\\d=18.2\ \mu m[/tex]

Out of four option, near option is (C) 17 μm.

The diameter of the wire is 18μm and the closest answer is option C.

The resistance of a wire is proportional to its length and inversely proportional to its area.

Given that a  4.0 m length of gold wire is connected to a 1.5 V battery, and a current of 4.0 mA flows through it. Then,

R = (ρL)/A

where

ρ = resistivity = 2.44 × 10-8 Ω·m

L = length

A = Area = [tex]\pi ^{2}[/tex]D/2

D = diameter of the wire

From Ohm's law, V = IR

make resistance R the subject of the formula

R = V/I

R = 1.5/4 x [tex]10^{-3}[/tex]

R = 375 Ω

Substitute all the parameters into the formula

R = (ρL)/A

375 = (2.44 × [tex]10^{-8}[/tex] x 4)/A

A = (9.76 × [tex]10^{-8}[/tex])/ 375

A = 2.603 x [tex]10^{-10}[/tex] [tex]m^{2}[/tex]

but

A =  [tex]\pi (D/2)^{2}[/tex]

2.603 x [tex]10^{-10}[/tex] =  [tex]\pi (D/2)^{2}[/tex]

[tex]\pi[/tex][tex]D^{2}[/tex] /4 = 2.603 x [tex]10^{-10}[/tex]

[tex]\pi[/tex][tex]D^{2}[/tex] = 1.04 x [tex]10^{-9}[/tex]

[tex]D^{2}[/tex] = (1.04 x [tex]10^{-9}[/tex])/ [tex]\pi[/tex]

D = [tex]\sqrt{3.3 * 10^{-10} }[/tex]

D = 1.8 x [tex]10^{-5}[/tex] m

D = 18 μm

Therefore, the diameter of the wire is 18μm and the closest answer is option C.

Learn more about Resistivity here: https://brainly.com/question/13735984

This question is incomplete, the complete is;

A 240-V rms 60-Hz supply serves a load that is 10 kW (resistive), 15 kVAR (capacitive), and 22 kVAR (inductive). Find:

a) the apparent power

b) the current drawn from the supply

c) the kVAR rating and capacitance required to improve the power factor to 0.96 lagging

d) the current drawn from the supply under the power-factor conditions.

Answer:

a) value of apparent power 12.21 kVA

b) current drawn from the supply is 50.86∠-35° A

c) value of capacitance is 188.03 uF

d) value of current drawn from supply 43.4∠-16.26° A

Explanation:

a)

to calculate the value of apparent power, we say;

S = (10 × 10³) - (j15 × 10³) +( j22 × 10³ )

S = (10 - j15 + 22j ) × 10³

S = ( 10 + 17j ) KVA

now calculating the apparent power

║S║ = √ (( 10 × 10³) + (17j × 10³ ))

= √ ( 100 + 49 × 10³)

= 12.21 kVA

Therefore the value of apparent power 12.21 kVA

b)

we calculate the current drawn from the supply

S = VI°

I° = S/V

I° = (( 10 + 17j ) ₓ 10³) / 240

I° = ( 0.041467 + j0.029167)  × 10³

I°= 41.67 + j29.167 A

Therefore I = 41.67 - j29.167 A

I = 50.86∠-35° A

so current drawn from the supply is 50.86∠-35° A

c)

from S = { 10 + 17j  KVA, }

we calculate the power factor

∅₁ = tan⁻¹ ( Q / P )

∅₁ = tan⁺¹ ( 7 ₓ 10³ ) / ( 10 ₓ 10³)

∅₁ = tan⁻¹ ( 0.7 )

∅₁ = 35°

Now consider the new power factor, we know cos∅ form the question is 0.96

calculate the new value of power factor angle

∅₂ = cos⁻¹ ( 0.96 )

∅₂ = 16.26°

Now calculate the reduction in the reactive power caused by the shunt capacitor

Qc = Q₁ - Q₂

= P( tan∅₁ - tan∅₂ )

= ( 10 × 10³) (tan(35°) - tan(16.26°))

= ( 10 × 10³) ( 0.7 - 0.29166)

= (10⁴)(0.4083)

Qc = 4.083 kVAR

Now we Calculate value of capacitance

C = Qc / ωV²rms

C = (4.083 × 10³) / 2π(60) ( 240)²

C = (4.083 × 10³) / 21.715 × 10⁶

C = 1.8803 × 10⁻⁴

C = 188.03 uF

Therefore value of capacitance is 188.03 uF

d)

To calculate the current drawn from the new power factor condition, we say;

S₁ = P₁ + jQ₁

P₁ = P = 10 kW

Q₁ = Q - Qc = ( 7 - 4.083) × 10³ = 2.917 kVAR

S₁ = 10 + j2.917 kVAR

We calculate the value of current drawn from supply

S₁ = Vl₁°

l₁° = S₁ / V

l₁° = (10 + j2.917) × 10³ / 240

l₁° = ( 0.04167 + j0.012154) × 10³

l₁° = 41.67 + j12.15 A

So l₁ = 41.67 - j12.15 A

l₁ = 43.4∠-16.26° A

the value of current drawn from supply 43.4∠-16.26° A

Answer:

The relationship is [tex]E=\frac{ kQ}{d^2}[/tex]

Explanation:

The electric field strength is denoted by the symbol E,

the test charge is denoted be q and the source charge be Q

distance is denoted by d

Then the equation can be rewritten in symbolic form as

Electric field strength is = Force/charge

[tex]E=\frac{F}{q}------1[/tex]

we know that the formula for force is given as

[tex]F= \frac{kQq}{d^2} ------2[/tex]

where [tex]k= 9*10^9 N.m^2/C^2[/tex]

and d is the separation distance between charges

We can insert the expression for Force in equation one

we have

[tex]E= \frac{kQ\sout{q}/d^2}{\xout{q}}--------3[/tex]

We can strike out both qs in the numerator and denominator we have

[tex]E=\frac{ kQ}{d^2}[/tex]

Answer:

The amount of time for the whole journey is 8 hours.

Explanation:

A truck covered 2/7 of a journey at an average speed of 40  mph. Representing 1 the total of the trip traveled, then the rest of the distance traveled is calculated as: [tex]1-\frac{2}{7} =\frac{5}{7}[/tex]

So if the truck covered the remaining 200 miles at [tex]\frac{2}{7}[/tex], this means that [tex]\frac{5}{7}[/tex] of the trip represents the 200 miles. So, to calculate the total distance traveled by the truck, you apply the following rule of three: if [tex]\frac{5}{7}[/tex] of the route represents 200 miles, the integer 1 (which represents the total of the route), how many miles are they?

[tex]miles=\frac{1*200miles}{\frac{5}{7} } =\frac{7}{5} *200 miles[/tex]

miles= 280

So the total distance traveled is 280 miles. Since speed is the relationship between the space traveled by an object and the time used for it ([tex]speed=\frac{distance}{time}[/tex]), then if the average of the entire trip was 35 mph and the distance traveled 280 miles, the time is calculated as:

[tex]time=\frac{distance}{speed}=\frac{280 miles}{35 mph}[/tex]

time= 8 h

The amount of time for the whole journey is 8 hours.

Answer:

Kindly check explanation

Explanation:

Given the following :

As train approaches ; frequency, f1 = 94Hz

As train recedes; frequency, f2 = 71Hz

Speed of sound in air ; v = 340m/s

A) speed of sound source (speed of train) = vs

From doppler effect :

As the train recedes ;

f2 = fs [v / (v + vs)] - - - - (1)

As train approaches :

f1 = fs [v / (v - vs)] ----- (2)

To find vs equate (1) and (2)

fs [v / (v - vs)] = fs [v / (v + vs)]

f1/f2 = v / (v - vs) ÷ v / (v + vs)

f1 / f2 = v / (v - vs) × (v + vs) / v

f1 / f2 = (v + vs) / (v - vs)

Let f1 / f2 = f

f = (v + vs) / (v - vs)

f (v - vs) = v + vs

fv - fvs = v + vs

fv - v = vs + fvs

v(f - 1) = vs(1 + f)

v(f - 1) / (1 + f) = vs

B)

v(f - 1) / (1 + f) = vs

f = f1 / f2 = 94/71 = 1.32 Hz

340(1.324 - 1) / (1 + 1.324) = vs

vs = 340(0.324) / 2.324

vs = 110.16 / 2.324

vs = 47.40 m/s

C.) To calculate fs, frequency of train, substitute vs into our equation.

f2 = fs [v / (v + vs)]

Following our substitikn we obtain:

fs = (2f / (f + 1))f2

D)

fs = (2f / (f + 1))f2

fs = 2(1.324) / (1.324 +1)) × 71

fs = (2.648 / 2.324) × 71

fs = 1.1394148 × 71

fs = 80.898450

fs = 80.90 Hz

Answer:

The angle is   [tex]\theta = 0.1719^o[/tex]

Explanation:

From the question we are told that

   The  distance of separation is  [tex]d = 100 * 10^{-6} \ m[/tex]

    The  wavelength of light is  [tex]\lambda = 600 nm = 600 *10^{-9} \ m[/tex]

Generally the condition for destructive interference is mathematically represented as

         [tex]dsin(\theta ) =[m + \frac{1}{2} ]\lambda[/tex]

Here  m is the order of maxima,  first minimum (dark space) m = 0

 So  

      [tex]100 *10^{-6 } * sin(\theta ) =[0 + \frac{1}{2} ]600 *10^{-9}[/tex]

=>   [tex]\theta = sin^{-1} [0.003][/tex]

=>   [tex]\theta = 0.1719^o[/tex]

Answer:

a)143.8 decays/minute

b)0.41 decays/minute

Explanation:

From;

0.693/t1/2 = 2.303/t log (Ao/A)

Where;

t1/2=half-life of C-14= 5670 years

t= time taken to decay

Ao= activity of a living sample

A= activity of the sample under study

a)

0.693/5670 = 2.303/1000 log(162.5/A)

1.22×10^-4 = 2.303×10^-3 log(162.5/A)

1.22×10^-4/2.303×10^-3 = log(162.5/A)

0.53 × 10^-1 = log(162.5/A)

5.3 × 10^-2 = log(162.5/A)

162.5/A = Antilog (5.3 × 10^-2 )

A= 162.5/1.13

A= 143.8 decays/minute

b)

0.693/5670 = 2.303/50000 log(162.5/A)

1.22×10^-4 = 4.61×10^-5 log(162.5/A)

1.22×10^-4/4.61×10^-5 = log(162.5/A)

0.26 × 10^1 = log(162.5/A)

2.6= log(162.5/A)

162.5/A = Antilog (2.6 )

A= 162.5/398.1

A= 0.41 decays/minute

Answer:

[tex]f=1.98\times 10^5\ Hz[/tex]

Explanation:

The magnetic field of a plane-polarized electromagnetic wave moving in the z-direction is given by :

[tex]B=1.2\times 10^{-6}\sin [2\pi (\dfrac{z}{240}-\dfrac{10^7t}{8})][/tex] .....(1)

The general equation of the magnetic field wave is given by :

[tex]B=B_o\sin (kz-\omega t)[/tex] ....(2)

Equation (1) is in form of equation (2), if we compare equation (1) and (2) we find that,

[tex]\omega=\dfrac{10^7}{8}[/tex]

We need to find the frequency of the wave. It is given by :

[tex]f=\dfrac{\omega}{2\pi}\\\\f=\dfrac{10^7}{8\times 2\pi}\\\\f=1.98\times 10^5\ Hz[/tex]

So, the frequency of the wave is [tex]1.98\times 10^5\ Hz[/tex]

Answer:

The linear momentum is zero

Explanation:

Because

When a rigid body is rotating about a fixed axis passing through point O, the body’s linear momentum given as L = mvG

But VG= 0 so

Linear momentum is zero

Answer:

The correct answer is b

Explanation:

The volume of a solid box is the length (l) times the width (w)  times the height  (h)

         V = l w h

This distance must be measured with a tape measure, therefore the volume is also measured by the metric through the product of the three measurements.

The correct answer is b

Answer:

The inductance of one conductor in the unstretched cord is 0.7849 μH

Explanation:

Given;

number of turns of the coil, N = 52 turns

diameter of the coil, d = 1.30 cm

radius of the coil, r = d/2 = 1.30 cm / 2 = 0.65 cm = 0.0065 m

length of the unstretched cord, l = 57.5 cm = 0.575 m

The inductance of one conductor in the unstretched cord is given by;

[tex]L = \frac{N^2 \mu_o A}{l}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

A is area of coil, = πr² = π x (0.0065)² = 1.328 x 10⁻⁴ m²

[tex]L = \frac{(52)^2(4\pi *10^{-7})(1.328*10^{-4})}{0.575} \\\\L = 7.849*10^{-7} \ H[/tex]

L = 0.7849 μH

Therefore, the inductance of one conductor in the unstretched cord is 0.7849 μH

Answer:

ΔS =  - k ln (3)

Explanation:

Using the Boltzmann's expression of entropy, we have;

S = k ln Ω

Where;

S = Entropy

Ω = Multiplicity

From the question, the configuration of the molecules in a gas changes so that the multiplicity is reduced to one-third its previous value. This also causes a change in the entropy of the gas as follows;

ΔS = k ln (ΔΩ)

ΔS = kln(Ω₂)  - kln(Ω₁)

ΔS = kln(Ω₂ / Ω₁)              -------------(i)

Where;

Ω₂ = Final/Current value of the multiplicity

Ω₁ = Initial/Previous value of the multiplicity

Ω₂ = [tex]\frac{1}{3}[/tex] Ω₁         [since the multiplicity is reduced to one-third of the previous value]

Substitute these values into equation (i) as follows;

ΔS = k ln ([tex]\frac{1}{3}[/tex] Ω₁ / Ω₁)

ΔS = k ln ([tex]\frac{1}{3}[/tex])

ΔS = k ln (3⁻¹)

ΔS =  - k ln (3)

Therefore, the entropy changes by - k ln (3)

Answer:

C. 0.25 m

Explanation:

Given;

current flow in the solenoid, I = 6.0 A

number of turns of the solenoid, N = 180 turns

the resistance of the circuit, R = 17 Ω

change in the magnetic field, dB/dt = 3.0 T/s

The emf of the circuit is given by;

V = IR

V = 6 x 17

V = 102 Volts

Magnitude of induced emf is given by;

[tex]E = N(\frac{dB}{dt} )A[/tex]

Where;

A is area of the solenoid

[tex]E = N(\frac{dB}{dt} )A\\\\A = \frac{E}{N(\frac{dB}{dt} )} \\\\A = \frac{102}{180 *3} \\\\A = 0.18889 \ m^2[/tex]

Area of the circular solenoid is given by;

A = πr²

where;

r is radius of the solenoid

[tex]r = \sqrt{\frac{A}{\pi} }\\\\r = \sqrt{\frac{0.18889}{\pi} }\\\\r = 0.25 \ m[/tex]

Therefore, the correct option is C. 0.25 m

Answer:

Explanation:

angle of reflection = angle of incidence i = 2θ

angle of refraction r = θ

sin i / sin r = 1.52

sin2θ / sin θ = 1.52

2 sinθ . cosθ / sin θ  = 1.52

2 cosθ = 1.52

cosθ = .76

θ= 41°

Hence angle of incidence = 41°

.

Answer:

You can create an electromagnet by wrapping an insulated wire around a metal with ferromagnetic properties and applying an electric current."

Explanation:

Electromagnets are made by wrapping an insulated wire around a metal with ferromagnetic properties (example is iron), to form a loop, and then applying a current through the wire. Electromagnets can generate magnetism with a strong force field, and unlike normal magnets, their strength can be varied by varying the amount of current flowing through the coil. Their main disadvantage, which is also their most utilized property is that their magnetism is lost once the current flowing through the wire is cut-off.

Answer:

You can create an electromagnet by wrapping an insulated wire around a metal with ferromagnetic properties and applying an electric current."

Explanation:

Answer:

Lorenz force law

Explanation:

The equation given name after the physicist and the mathematician James Clerk  Maxwell. He published his first equation in 1861 and 1862 that included the Lorenz force law. These equation were used by Maxwell first of all for the light in electromagnetic phenomena.

In his equations Maxwell proposed that how the electric and magnetic field is fluctuate and constant speed in the vacuum which is called a electromagnetic radiation.

These are waves that occurs at different level of wavelength spectrum. These equation have two major variant such as universal applicability. The Maxwell equations are used for the Equivalent alternative formulation.

Answer:

a) dB / dA = 2 ,

b) Network B     Network A

        2                         1

        4                         2

        6                         3

Explanation:

a) The expression for grating diffraction is

         d sin θ = m λ

where d the distance between two slits, λ the wavelength and m an integer that represents the diffraction range

In this exercise we are told that the two spectra are in the same position, let's write the expression for each network

Network A

m = 1

         sin θ = 1 λ / dA

Network B

m = 2

        sin θ = 2 λ / dB

they ask us for the relationship between the distances, we match the equations

            λ / dA) = 2 λ / dB

            dB / dA = 2

b) let's write the equation of the networks

         sin θ = m_A  λ / dA

         sin θ = m_B  λ / dB

we equalize

           m_A  λ/ dA = m_B  λ / dB

we use that

          dB / dA = 2

           m_A 2 = m_B

therefore the overlapping orders are

Network B     Network A

   2                         1

   4                         2

    6                       3

Answer:

main sequence

Explanation:

because i think it is true

Answer:

Explanation:

1 km=1000 m

1 hour =60 min =60*60 sec=3600 sec

Now put 1000 m instead of km and 3600 sec instead of hour in the given expression.

=50 km/hour

=50*1000 m/3600 sec

=500 m/36 sec

=13.89 m/s

Answer:

= 13.89 m/s

Explanation:

     km     1000 m        1 hr

50 ----- x ----------  x ------------  

       hr        1 km      3600 secs

= 13.89 m/s

Answer: v₂ = 5962 km

the spacecraft  will crash into the lunar surface at a speed of 5962 km if nothing is done to correct its orbits

Explanation:

Given that;

Lunar surface is in an altitude h = 43.0 km =  43 × 10³ m

we know; Radius of moon R₁ = 1.74 × 10⁶, mass of moon = 7.35 × 10²²

speed of the space craft when it crashes into the lunar surface , v

decreasing speed of the space craft = 23 m/s

Now since the space craft travels in a circular orbit, we use centrifugal expression Fe = mv²/r

but the forces is due to gravitational forces between space craft and lunar surface Fg = GMn/r²

HERE r = Rm + h

we substitute

r = 1.74 × 10⁶ m + 43 × 10³ m

= 1.783 × 10⁶ m

On equating these, we have

G is gravitational force ( 6.673 × 10⁻¹¹ Nm²/kg²)

v²/r = GM/r²

v = √ ( GM/r)

v = √ ( 6.673 × 10⁻¹¹ Nm²/kg² × 7.35 × 10²² / 1.783 × 10⁶ )

v = √ (2750787.9978)

v = 1658.55 m/s

Now since speed is decreasing by 23 m/s

the speed of the space craft into the lunar face is,

v₁ = 1658.55 m/s - 23 m/s

v₁ = 1635.55 m/s

Now applying conversation of energy, we say

1/2mv₂² = 1/2mv₁² + GMem (1/Rm - 1/r)

v₂ =  √ [ v₁² + GMe (1/Rm - 1/r)]

v₂ =   √ [ 1635.55²  + ( 6.673 × 10⁻¹¹ Nm²/kg² × 7.35 × 10²²) (1/ 1.74 × 10⁶ - 1 / 1.783 × 10⁶)]

v₂ =  √ (2675023.8025 + 67979.24)

v₂ = √(2743003.046)

v₂ = 1656.2 m/s

now convert

v₂ = 1656.2 × 1km/1000m × 3600s/1hrs

v₂ = 5962 km

Therefore the spacecraft  will crash into the lunar surface at a speed of 5962 km if nothing is done to correct its orbits

Answer:

D-The asthenosphere and outer core would solidify.

Explanation:

The athenosphere is a region of the earth mantle below the lithosphere.

If the Sun didn’t retain the heat formed during its formation then it will have an adverse effect on other parts such as the core and mantle.The inner core wouldn’t liquefy but solidify. The asthenosphere and outer core would also solidify.

The Seismic waves wont be able to move the crust and the Earth’s magnetic field wouldn’t disappear but would be more pronounced.

The Earth’s magnetic field would disappear as well as solidification of asthenosphere and outer core will occur.

The asthenosphere and outer core would solidify and the Earth’s magnetic field would disappear if the Earth did not retain the heat from its formation because this heat make all the materials present in the outer core and asthenosphere in liquid form. This liquid form in the outer core is responsible for the generation of magnetic field around the earth.

If this heat will not retain in asthenosphere and outer core, the heat will escape and cooldown the asthenosphere and outer core which change it into solid form so the Earth’s magnetic field will be disappear so we can conclude that the Earth’s magnetic field would disappear as well as solidification of asthenosphere and outer core will occur if the Earth did not retain the heat from its formation.

Learn more: https://brainly.com/question/17216014

Answer:

The amount of energy delivered is 730.84 J

Explanation:

Given;

rms intensity of the electric field, [tex]E_{rms}[/tex] = 6.75 v/m

area of the wall, A = 2.0 cm² = 2.0 x 10⁻⁴ m²

The average intensity of the wave is given  by;

[tex]I_{avg} = c \epsilon_o E_{rms}^2[/tex]

where;

c is the speed of light

ε₀ is permittivity of free space

I = (3 x 10⁸)(8.85 x 10⁻¹²)(6.75)²

I = 0.121 W/m²

Average power delivered, P = I x A

P = 0.121 x 2 x 10⁻⁴

P = 2.42 x 10⁻⁵ W

The amount of energy delivered is calculated as;

E = P x t

E = 2.42 x 10⁻⁵ x 3.02 x 10⁷

E = 730.84 J

Therefore,  the amount of energy delivered is 730.84 J

Answer:

To the fish the man appears to be 3.06m above its eyes

Explanation:

We know that refractive index n

n = real dept/ apparent depth

While apparent depth is the distance the fish appears to the man which is 2.3m so using the equation

Real dept= n x apparent depth

= 1.333* 2.3= 3.06m

Answer:

43200c

Explanation:

Answer:

The electroscope will become discharged by loosing electrons in a phenomenon called photoelectric effect

Explanation:

The UV light knocks off loosely bounded electrons in the outer shell causing the metal electroscope to discharge

Answer:

34.3Hz

Explanation:

We know that

For a pipe open at one end, fundamental frequency (Fo)

is

Fo = v/4L

Where v= 340m/s

Fo = 340/4 x 2.48 = 34.3Hz