Determine if each statement is True or False and put True or False in the blank. A-COOH group is considered an alcohol and a ketone as well as a carboxylic acid. Alcohols, ethers, and esters all contain O atoms. Amides contain a CEO and a C-N on the same carbon. Esters, amides, carboxylic acids and nitriles all contain C=O groups. Alkenes, alkynes, and aromatics are all types of hydrocarbons. Alkanes typically have the formula CnH2n.

1. The ears feel pressure below water because of the pressure of the water above and the atmospheric pressure.

2. The purpose of this pressurization is to ensure that the pressure in the ear and that of the outside atmosphere are equal.

3. What happens to the gas in your spacecraft and in your body at each of these times is as follows:

A. prior to takeoff, inside the rocket, wearing your space suit, the air pressure is the same

B. The air pressure is greater

C. The air pressure is less

The force that air, whether compressed or unconfined, applies to whatever surface it comes into touch with is known as air pressure.

Air pressure is also known as atmospheric pressure and varies based on altitude.

Learn more about air pressure at: https://brainly.com/question/12870338

#SPJ1

The solid lines on a topographic map typically represent contour lines, which are used to show the changes in elevation of the land surface.

A topographic map is used to represent the three-dimensional features of the terrain on a two-dimensional surface. The topographic map shows the location, shape, and elevation of natural and man-made features on the earth's surface, such as hills, valleys, rivers, lakes, roads, buildings, and contour lines.

These lines connect points of equal elevation and show the shape and slope of the terrain. They can be used to visualize the topography of an area and can be useful for navigation, planning hikes, and other outdoor activities.

Find out more on topographic map here: https://brainly.com/question/181146

#SPJ1

The molecular formula of compound S, C₇H₁₄O₂, suggests that it is a secondary alcohol or an aldehyde.

The compound "C₇H₁₄O₂" is a molecular formula which represents the chemical structure of an organic compound containing 7 Carbon atoms, 14 Hydrogen atoms and 2 Oxygen atoms. The H NMR data is consistent with a secondary alcohol, as the doublet at 0.93 ppm and the doublet at 3.86 ppm correspond to the CH3 groups and the multiplet at 1.91 ppm corresponds to the OH proton.

The triplet at 1.15 ppm corresponds to the CH₂ group and the quartet at 2.33 ppm corresponds to the CH group. Based on these spectral data, it is likely that compound S is a secondary alcohol with the molecular formula C₇H₁₄O₂.

Learn more on compound structures here: https://brainly.com/question/28161072

#SPJ1

Samples of NaF(s) and NH₄Cl(s) are dissolved in separate beakers that each contain 100 ml of water. The equation that best represents the formation of the slightly acidic solution will be option c.

NH⁴⁺(aq) + H₂O(l) --- NH₃(aq) + H₃O(aq)

The NH4Cl salt forms a slightly acidic solution as it generates hydronium ions when dissolved in water. The NaF salt does not generate hydronium ions when dissolved in water, so it forms a neutral solution. Substitute with "Sodium fluoride is an inorganic salt of fluoride carrying molecular formula NaF." Sodium fluoride solutions are utilized with hard water-insoluble mixtures of calcium and magnesium fluoride can constitute. It is a dry chemical utilized in the fluoridation of drinking water, it should be manually cogitated and summed up in the mixing tank. NH₄Cl is an inorganic compound with the chemical term Ammonium chloride.

To learn more about an acidic solution visit here:

https://brainly.com/question/10682683

#SPJ4

9.7 g of C₁₂H₂₆ would have to be reacted to generate enough heat to raise the temperature of 750 g of liquid water from 10°C to 90°C.

To calculate the amount of heat required to raise the temperature of water, we can use the specific heat capacity of water, which is 4.184 J/g°C.

The amount of heat required to raise the temperature of 750 g of water from 10°C to 90°C is given by the following equation:

Q = mcΔT

where m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.

Q = 750 g × 4.184 J/g°C × (90°C - 10°C) = 28,665 J

We need to determine the amount of heat produced by the reaction of C₁₂H₂₆ with oxygen to form CO₂ and H₂O. We can use the following equation:

C₁₂H₂₆ + 19/2 O₂ → 12 CO₂ + 13 H₂O

The standard enthalpy change of combustion (ΔH°c) for C₁₂H₂₆ is -50,540 kJ/mol. We can use this value to calculate the amount of heat generated per mole of C₁₂H₂₆.

Q = ΔH°c × n = -50,540 kJ/mol × n

where n is the number of moles of C₁₂H₂₆ reacted.

Finally, we can calculate the number of moles of C₁₂H₂₆ required to generate the desired amount of heat by dividing the total heat required by the heat generated per mole of C₁₂H₂₆:

n = Q / ΔH°c = 28,665 J / (-50,540 kJ/mol) = 0.0568 mol

And finally, we can convert moles to grams using the molar mass of  C₁₂H₂₆, which is approximately 170.3 g/mol:

m = n × M = 0.0568 mol × 170.3 g/mol = 9.7 g

To know more about specific heat capacity here

https://brainly.com/question/29766819

#SPJ4

The boiling point of a compound is determined by the strength of the intermolecular forces between its constituent molecules. Stronger intermolecular forces result in a higher boiling point.

The boiling point information for each of the compounds:

SiF₄ has a boiling point of -90.1°C.

GeF₄ has a boiling point of -67.2°C.

Geld has a boiling point of 63.6°C.

CCl₄ has a boiling point of 77.7°C.

CO has a boiling point of -191.5°C.

CI₂ has a boiling point of -39.8°C.

Learn more about boiling point here: https://brainly.com/question/24168079

#SPJ4

One mole of the compound Al₂ (SO₄)₃ contains 2 moles of Al, 3 moles of sulphur atoms and 6 moles of O₂ gas.

Aluminum sulphate is an ionic compound formed by the donation of electrons from the Al metal to the sulphate group. In the sulphate group, the oxygen and sulphur are covalently bonded.

The reaction of the formation of aluminum sulphate can be written as follows:

[tex]\rm 2Al + 3 SO_{4} \rightarrow Al_{2}(SO_{4})_{3}[/tex]

Here, one mole of this compound is formed by 2 moles of Al and 3 moles of sulphate group. 3 moles of sulphate group contains 3 moles of S and 6 moles of O₂.

Then, 6 moles of Al₂ (SO₄)₃ contains 12 moles of Al, 18 moles of  S and 36 moles of oxygen gas.

Find more on Al₂ (SO₄)₃:

https://brainly.com/question/15569711

#SPJ1

Answer:

True

Explanation:

True because Hazmat labels are used to communicate information necessary to protect human health and the environment. They are used to identify the presence of hazardous materials, and provide information about the risks associated with these materials.

French chemist Claude Geoffroy the Younger proved in 1753 that it was an element in and of itself, not only a variety of lead.

The word "bismuth" is most likely a Latinization of the old German word "weissmuth," which means "white material" and may have been given to the metal because of its white oxide.

As such, it is resistant to magnetization and is attracted to magnetic fields. The video demonstrates one result of this (left). Additionally, for a metal, bismuth has very high electrical resistance. Other than mercury, it has the lowest heat conductivity of any metal.

The peculiar characteristic of bismuth is that it expands when it freezes, much like water. Four more elements—silicon, gallium, antimony, and germanium—also increase when they freeze.

Therefore, French chemist Claude Geoffroy the Younger proved in 1753 that it was an element in and of itself, not only a variety of lead.

To learn more about bismuth, refer to the link:

https://brainly.com/question/13721046?

#SPJ1

In the lewis diagram of N₂O molecule, a triple bond is formed between the nitrogen atoms, which means,  in the Lewis diagram the nitrogen atoms are connected with three lines.

The Lewis diagram is used to represent the way in which two or more atoms are bonded to each other. This is possible by using lines to represent bonds and dots to represent the electrons.

In the case of the molecule N₂O bonding occurs in such a way that the oxygen atom is connected  to one of nitrogen atoms. The nitrogen atom that is not connected to the oxygen will have 2 electrons which is represented by dots as the number of valence electrons is 5, but in case of triple bond three are used.

The oxygen atom  has 6 electrons represented by dots, which is equal to the number of valence electrons.

Considering the formal charges, the lewis structure in which the electronegative oxygen atom (O) contains a negative charge and the electropositive nitrogen atom (N) contains a positive charge represents bonding in the N₂O molecule.

To know more about lewis diagrams here

https://brainly.com/question/29573072

#SPJ4

Answer:

Explanation:

The value you measured on the scale in ounces = X

28.3 grames = 1oz

1/4of grames= 1/28.3 *1/4

                You have to compare as below;

 if you want to convert the measured scale to grames ; multiply by 28.3

if you want to convert measured to oz ; you have to (1/28.3 *1/4) *X/4

If the absolute pressure in a tank is 140 kpa, and the atmospheric pressure is 100 kpa. 0.2998 m is the pressure head in mm of mercury.

What is pressure ?

The definition of pressure is the amount of force that is exerted to a certain region. It can be calculated mathematically as P=FA, where F is the force applied perpendicular to surface area A. The pascal (Pa), or one newton per square metre (N/m 2), is the accepted unit of pressure..

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

Gauge pressure= absolute pressure - atmosphere pressure

= 140-100

= 40Kpa

∴Gauge pressure = Pm × g × hm

40×10³= 13600× 9.01× hm

hm= 0.2998 m

Therefore, If the absolute pressure in a tank is 140 kpa, and the atmospheric pressure is 100 kpa. 0.2998 m is the pressure head in mm of mercury.

Learn more about pressure from the given link.

https://brainly.com/question/28012687

#SPJ4

5 H₂O(l) + CuSO₄(s) → CuSO₄.5 H₂O(s) is the chemical equation which describes as an enthalpy change of formation.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/25858221

#SPJ1

The percent yield of Compound C is 84.0%.

Theoretical yield of C:

The mass of Compound C produced in the reaction can be calculated using the law of conservation of mass, which states that mass is neither created nor destroyed, so the sum of the masses of the reactants must equal the mass of the product.

Given the masses of Compounds A and B, we can calculate the mass of Compound C as follows:

Mass of Compound C = Mass of Compound A + Mass of Compound B

= 7.0 g + 8.0 g

= 15.0 g

Therefore, the theoretical yield of Compound C is 15.0 g.

Percent yield of Compound C:

The percent yield of Compound C is calculated using the following formula:

Percent yield = (Actual yield/Theoretical yield) x 100

Given that 12.6 g of Compound C was isolated at the end of the reaction, the percent yield of Compound C can be calculated as follows:

Percent yield = (12.6 g/15.0 g) x 100

= 84.0%

Read more about  theoretical yield

https://brainly.com/question/14966377

#SPJ1

All four compounds are isomers of 4-isopropylheptane, and each isomer has its own unique properties, such as boiling point, melting point, solubility, and other physical properties.

The names of the isomers of 4-isopropylheptane are 3,4-diethylhexane, 4-(methylethyl)heptane, 2,2,3-trimethyloctane, and 2-methylnonane. 3,4-diethylhexane and 4-(methylethyl)heptane are structural isomers, which means that the molecules have different structural formulas and connectivities. 3,4-diethylhexane has two ethyl groups attached to the fourth carbon, while 4-(methylethyl)heptane has one methyl and one ethyl group attached to the fourth carbon. 2,2,3-trimethyloctane and 2-methylnonane are both positional isomers, meaning that the molecules have the same structural formula but the groups attached to the carbon chain are arranged differently. 2,2,3-trimethyloctane has three methyl groups attached to the second, third, and fourth carbons, while 2-methylnonane has two methyl groups attached to the second and ninth carbons.

Learn more about 4-isopropylheptane here:

https://brainly.com/question/30333697

#SPJ4

he correct answer is (C) M and S, which are the ions that remain in solution after the reaction has gone to completion.

When 20.0 mL of a 1.0 M solution of M2R3 and 50.0 mL of a 1.0 M solution of TS2 are mixed, a reaction occurs, producing two precipitates, MS3 and TR. The precipitates are solid compounds that are no longer in solution, so they are not included in the ions that remain in solution.

Based on the balanced chemical equation, the reactants in solution are M2R3 and TS2, which means that the ions that remain in solution are M and S (option C). The reaction consumes the R and T ions, causing them to combine with the M and S ions to form the solid precipitates.

Therefore, the correct answer is (C) M and S, which are the ions that remain in solution after the reaction has gone to completion.

Learn more about ions:

brainly.com/question/14982375

#SPJ4

B. recrystallization. Recrystallization is the process of forming new strain-free grains in a metal that has been heated to an elevated temperature.

Recrystallization is a process used to purify a solid compound. It involves dissolving the compound in an ariate solvent, usually one that has a high boiling point, and then slowly cooling the solution. As the solution cools, the dissolved compound will slowly crystallize out of the solution and the impurities that were present in the sample will remain dissolved. This process is repeated multiple times to ensure the highest purity of the compound is achieved. Recrystallization is a useful technique for purifying compounds that are not soluble in water, since it does not require the use of expensive reagents. It also allows for the purification of compounds that are insoluble in any organic solvent. This process is commonly used in laboratories to prepare a sample for further analysis or for use in a synthesis.

To learn more about Recrystallization

https://brainly.com/question/15710621

#SPJ4

Here's a matching of the subatomic particles described in each statement:

____ possesses a positive charge ---> Proton

____ has no charge ---> Neutron

____ has a mass slightly less than that of a neutron ---> Electron

____ has a charge equal to but opposite in sign to that of an electron ---> Electron

____ is not found in the nucleus ---> Electron

____ has a positive charge ---> Proton

____ can be called a nucleon ---> Proton and Neutron

____ is the heaviest of the three subatomic particles ---> Neutron

____ has a relative mass of 1836 if the mass of an electron is 1 ---> Proton

____ has a relative mass of 1839 if the mass of an electron is 1 ---> Neutron

Learn more about proton, electron, neutron here: https://brainly.com/question/13131235

#SPJ4

The compound with the higher boiling point in this pair is GeF₄. The boiling point of GeF4 is 128 °C, whereas the boiling point of GeCl₄ is only -40.6 °C.

This is due to the larger size of the GeF₄ molecule, which results in stronger London dispersion forces between molecules, increasing the boiling point.

London dispersion forces are extremely weak attractive forces between atoms or molecules caused by the electrostatic attraction between temporary induced dipoles. They arise due to the uneven distribution of electrons within an atom or molecule, which causes one end of the atom or molecule to become slightly positively charged and the other end to become slightly negatively charged.

These charges attract each other, resulting in a temporary attractive force between the two atoms or molecules. London dispersion forces are the weakest of the intermolecular forces, but they are still important in determining the properties of substances.

Learn more about the boiling point:

https://brainly.com/question/40140

#SPJ4

The species in water are the Mg^2+ and SO4^2-

Ionic substances dissolve in water because of the attraction between the positive and negative charges of the ions and the polar water molecules. The ions are surrounded by water molecules through a process known as solvation, which causes the ionic substance to break apart into individual ions.

The positive and negative charges of the ions are attracted to the opposite charges on the water molecules, which allows the ions to be dispersed evenly throughout the water. This makes the substance appear to have dissolved, even though the individual ions are still present in the solution.

Learn more about ions:https://brainly.com/question/14982375?

#SPJ1

The chemical equation is the method which is used to represent the chemical reaction using the chemical formulae and symbols of the reactants and products.

An equation which depicts only the reacting species of the reaction and avoids the spectator ions of the reaction is termed as the net ionic equation. The redox reactions can be represented as net ionic equation.

The spectator ions are those which do not participate in chemical reactions and they are present on both sides of the reaction. Thus they are cancelled while writing a net ionic equation.

Here the silver(I) acetate and cobalt(II) bromide combines as follows:

2AgC₂H₃O₂ + CoBr₂ → Co(C₂H₃O₂)₂ + 2AgBr

The complete ionic equation is:

Ag⁺ (aq) + CH₃COO⁻ (aq) + CO²⁺ (aq) + 2Br⁻ (aq) = CO²⁺ (aq) + 2 CH₃COO⁻ (aq) + 2 AgBr (s)

Thus the net ionic equation is:

Ag⁺ (aq) + 2Br⁻ (aq) → CH₃COO⁻ (aq) + 2 AgBr (s)

To know more about ionic equation, visit;

https://brainly.com/question/28208725

#SPJ1

What is missing is 234/90 Th

We know that when we talk about the radioactive decay, we are talking about the breaking up of the radioactive nucleus into its components. The components of the radioactive nucleus can be seen on the left hand side of the reaction equation.

In this case, we can see that what we have here is actually an alpha decay as what has been given off on the right is an alpha particle from the image that has been shown here as concerns the radioactive decay of the isotope

Learn more about alpha decay:https://brainly.com/question/24276675

#SPJ1

Vapor pressure of X is lower than Y at 20°C, therefore heat of vaporization pf X is greater than Y.

Vapour pressure is a measure of a material's tendency to change into a gaseous or vapour state, and it rises with temperature.

The boiling point of a liquid is the temperature at which the vapour pressure at its surface equals the pressure exerted by its surroundings.

Heat of vaporization ∝ 1 ÷ Vapour pressure

But at 60°C vapour pressure of X is greater than Y.

Thus, at this temperature heat of vaporization pf Y is greater than X

To learn more about the vapor pressure, follow the link;

https://brainly.com/question/11864750

#SPJ1

The standard reduction potentials for copper, chromium and nickel ions.

Ions are atoms or molecules that have an abnormally high proton content compared to their electron content, producing a net electric charge. Ions can have either a positive charge (referred to as cations) or a negative charge (called anions). Ions can arise when electrons are gained or lost.

(a) Cr3+, Ni2+, and Cu2+ are the three reducing agents with the strongest effects. This is due to the fact that Cr3standard +'s reduction potential is lower (-0.74 V) than Ni2 +'s, which is lower (-0.25 V), which is lower (-0.34 V), and so on. Stronger reducing agents are required for higher adverse reduction potentials.

(b)The standard reduction potential of Cr (s) is -0.74 V, which is more negative than that of Cu2+ (+0.34 V), and this explains why the reaction is spontaneous under standard conditions. As a result, an unplanned reaction will take place when electrons move from the Cr (s) to the Cu2+ (aq) ion.

(c) The concentration of the fluid at the cathode would drop after the cell had been discharged continually. This is because the reduction of Cu2+ (aq) to Cu (s) at the cathode would result from electrons flowing from the anode to the cathode. The reaction would become less spontaneous as the concentration of Cu2+ (aq) near the cathode dropped, eventually stopping the process.

To know more about ions, visit:

https://brainly.com/question/1488567

#SPJ1

Answer:

20M or 20mol/L

Explanation:

molarity = moles/volume (in Liters)

= 2.5/0.125L

=20M or 20 mol/L

The best synthesis of (R)-3-chloro-2,3-dimethylhexane from (R)-2,3-dimethylhexan-3-ol would be using PCl3.

PCl3 is a commonly used reagent for chlorination reactions, and it can efficiently convert alcohol into the corresponding alkyl chloride.

What does PCl3 do in a reaction?

Phosphorus trichloride (phosphorus chloride, PCl3) is a colorless fuming liquid that reacts violently with water to liberate phosphoric acid and hydrogen chloride (HCL) gas. PCl3 is a strong oxidizer and will readily react with many organic compounds.

What is PCl3 used for?

Phosphorus Trichloride is a colorless, clear, fuming liquid with a strong odor. It is used in gasoline additives and textile finishing, and to make other chemicals, pesticides, dyestuffs, catalysts, and plasticizers.

Is PCl3 oxidizing or reducing agent?

PCl(3) can act as an oxidizing as well as a reducing agent

To know more about chlorination reactions:

https://brainly.com/question/24103636

#SPJ4

Order zero. Concentration data is commonly monitored during a reaction to determine the order with respect to a reactant. Consider the types of observations listed.

Observations are the data collected through direct or indirect means. It is the process of gathering information by watching, listening, and measuring in order to gain knowledge and understanding. Observations can be qualitative, meaning they involve descriptions and subjective information, or quantitative, meaning they involve measurements and objective information. Examples of observational data include surveys, interviews, audio recordings, video recordings, and physical measurements. Observations are used to learn more about the world around us and to make informed decisions.

To learn more about observations

https://brainly.com/question/15157110

#SPJ4

Answer:

Balanced equation:  2Fe(OH)₃ → Fe₂O₃ + 3H₂O

a)  2.39 g

b)  1.78 g

Explanation:

Given unbalanced chemical equation:

Fe(OH)₃ → Fe₂O₃ + H₂O

To balance a chemical equation, we need to make sure that there are the same number of atoms of each element on both sides of the equation. We can do this by adding coefficients in front of a chemical symbol or formula where needed.

Therefore, the balanced equation is:

[tex]\large\boxed{\sf 2Fe(OH)_3 \rightarrow Fe_2O_3 + 3H_2O}[/tex]

[tex]\hrulefill[/tex]

Given that 0.75 L of water vapor (H₂O) is produced at STP (Standard Temperature and Pressure), which is 273.15 K and 1 atm, we can calculate the number of moles of water vapor produced using the ideal gas law:

[tex]\large\boxed{PV = nRT}[/tex]

where:

Solving for n:

[tex]\begin{aligned}n &= \dfrac{PV}{RT}\\\\n&= \dfrac{1 \cdot 0.75}{0.082\cdot 273.15}\\\\n&\approx 0.0334846841 \;\rm mol\end{aligned}[/tex]

Therefore, the number of moles of water vapor produced is 0.0335 moles (3 s.f.).

Using the stoichiometric coefficients from the balanced equation, we can relate the moles of water vapor produced to the moles of iron (III) hydroxide (Fe(OH)₃) used.

From the balanced equation, 2 moles of Fe(OH)₃ produce 3 moles of H₂O. Therefore, the number of moles of Fe(OH)₃ is:

[tex]\phantom{w.}\rm 0.0334846841\; moles\;of\;H_2O \times \dfrac{2 \text{ moles of } Fe(OH)_3}{3 \text{ moles of } H_2O}\\\\ \approx 0.0223231227 \text{ moles of } Fe(OH)_3[/tex]

Now, calculate the molar mass of Fe(OH)₃:

[tex]\phantom{w.}\rm Molar\; mass\; of\; Fe(OH)_3\\\\=\rm (1 \times Atomic\; mass \;of\; Fe) + (3 \times Atomic\; mass\; of\; O) + (3 \times Atomic \;mass\; of \;H)\\\\\rm \approx (1 \times 55.845\;g/mol) + (3 \times 15.999\; g/mol) + (3 \times 1.008\;g/mol)\\\\\rm \approx 106.866\; g/mol[/tex]

Finally, calculate the mass of Fe(OH)₃ by multiplying the number of moles by the molar mass:

[tex]\begin{aligned}\rm Mass\; of\; Fe(OH)_3 &= \rm 0.0223231227 \; mol \times 106.866\; g/mol\\&= \rm 2.38558283\; g\\&\approx \rm 2.39\;g\;(3\;s.f.)\end{aligned}[/tex]

Therefore, approximately 2.39 grams of iron (III) hydroxide were used.

[tex]\hrulefill[/tex]

From the balanced equation, 2 moles of Fe(OH)₃ produce 1 mole of Fe₂O₃. Therefore, the moles of Fe₂O₃ produced is:

[tex]\phantom{w.}0.0223231227 \text{ moles of } \rm Fe(OH)_3 \times \dfrac{1 \text{ mole of } Fe_2O_3}{2 \text{ moles of } Fe(OH)_3}\\\\ \approx 0.0111615614\text{ moles of } Fe_2O_3[/tex]

Now, calculate the molar mass of Fe₂O₃:

[tex]\phantom{w.}\rm Molar\; mass\; of\; Fe_2O_3\\\\=\rm (2 \times Atomic\; mass \;of\; Fe) + (3 \times Atomic\; mass\; of\; O) \\\\\rm \approx (2 \times 55.845\;g/mol) + (3 \times 15.999\; g/mol) \\\\\rm \approx 159.687\; g/mol[/tex]

Finally, calculate the mass of Fe₂O₃ by multiplying the number of moles by the molar mass:

[tex]\begin{aligned}\rm Mass\; of\; Fe_2O_3&= \rm 0.0111615614 \; mol \times 159.687\; g/mol\\&= \rm 1.78235625\; g\\&\approx \rm 1.78\;g\;(3\;s.f.)\end{aligned}[/tex]

Therefore, approximately 1.78 grams of iron (III) oxide were used.

a. The atomic number gives the number of protons in the nucleus.

b. In an atom, the number of electrons is equal to the number of protons.

c. Sodium and potassium are examples of elements called alkali metals.

Alkali metals are elements located in Group 1 on the periodic table, and they are extremely reactive. They are characterized by having a single electron in their outer shell, which makes them highly reactive and prone to forming chemical bonds. Alkali metals are found in the atmosphere, in the soil, and in the human body, and they are essential for life. They are also used in various industries, including the production of fertilizers, cleaning agents, and medicines.

To learn more about periodic table

brainly.com/question/11155928

#SPJ4