Answer:
Three principal theories about acid-base are,
1. Arrhenius theory
2. Bronsted-Lowry theory
3. Lux-Flood definition
4. Lewis theory
5. Usanovich definition
1. According to the Arrhenius, acids give up hydrogen ion in aqueous medium and a base give up hydroxyl ion in its aqueous medium. Examples are aqueous solution of HCl, CH3COOH, PhCOOH, and H2SO4. These give up H+ in an aqueous medium. Aqueous solutions of NaOH, Ca (OH)2 are Arrhenius bases.
Arrhenius theory has some limitations. This theory cannot explain the acidic nature of BF3 or basic behavior of NH3. This theory fails to give any explanation about acidity and basicity which does not produce H+ and OH- in their aqueous solutions.
2. According to the Bronsted-Lowry, an acid releases proton and a base accepts proton. NH3 accepts proton and forms ammonium ion, so ammonia acts as a base.
But this theory also has limitations. According to this theory acidic behavior of BF3 still cannot be explained.
3. Lux-Flood describes the acid-base theories based on oxide ion transformation. It gives clear explanation for acid-bases theories of non-protonic system. According to them, a base will donate the oxygen atom and an acid will accept oxygen atom.
4. According to the Lewis theory, acids are those substances which accept electron pair and base are those substances which donates electron pairs. Lewis theory can explain the acidic nature of BF3. In BF3, B is two electrons short to fulfil its octet. So it can accept a pair of electrons from an electron donating substituent. So it is an electron pair acceptor compound and acts as an acid.
Substances which have π electrons can donate electron pair to an electron deficient substance and acts as a base. Ethylene and acetylene is Lewis bases. AlCl3, PCl3 are Lewis acids.
5. According Usanovich, an acid is some chemical species which would react with bases and yields cations or accepts anions or electrons. A base is some chemical species which would react with acids, yield anions or electrons or combine with cations.
Explanation:
Fluorine gas is placed in contact with calcium metal at high temperatures to produce calcium fluoride powder. What is the
formula equation for this reaction?
+
1.F2(1) + Na(s) — NaF2(s)
2.F2(g) + Ca(s) — CaF20)
3 F2(g) + Na(s) — NaF 2(0)
4. F2(g) + Ca(s) __, CaF2(s)
Answer: B aka #2
Explanation:
The Chemical equation for this reaction is F[tex]_2[/tex](g) + Ca(s) → CaF[tex]_2[/tex]. Therefore, the correct option is option B.
Chemical equations are symbols or chemical formulas that depict a chemical reaction symbolically. With a plus sign separating the entities in the reactants and products, the reactant objects are listed on the left as well as the product objects are listed on the right.
The critical values of a stoichiometric values are shown as coefficients alongside the symbols or formulas of the various entities. Fluorine gas is placed in contact with calcium metal at high temperatures to produce calcium fluoride powder. The formula equation for this reaction is
F[tex]_2[/tex](g) + Ca(s) → CaF[tex]_2[/tex]
Therefore, the correct option is option B.
To know more about chemical equation, here:
https://brainly.com/question/19626681
#SPJ7
What is the hydroxide ion concentration of an aqueous solution with a ph of 3. 45
the solution is an alkali
The hydroxide ion concentration of an aqueous solution with a ph of 3. 45 is 10⁻³·⁴⁵
What is pH?PH is potential hydrogen. It helps in to determine the acidity and basicity of any solution.
To get the hydroxide ion concentration of an aqueous solution, the following formula will be used.
[tex]pH = -log^[^H^+^]\\pH=-log^[^H^3^O^+^]\\\\-log [^H^3^O^+^] - pH\\ 10 ^-pH = [H3O^+] \\\\H3O^+ = 10^-^3^.^4^5[/tex]
Thus, the hydroxide ion concentration is 10⁻³·⁴⁵
Learn more about pH
https://brainly.com/question/15289741
#SPJ4
Acidic oxides are common air pollutants and the source of acid precipitation. Basic oxides are not. Use what you know about these oxides to explain this difference.
Answer:
An acidic oxide reacts with water and produces acid. They are also called acid anhydride, which are oxides that react with water to form an acid, or with a base to form a salt. They are oxides of either nonmetal or of metals in high oxidation states. An oxide is a binary compound that we obtain upon the reaction of oxygen with other elements. Their chemistry can be systematically understood by taking an oxoacid and removing water from it until only an oxide remains. The resulting oxide belongs to this group of substances. Usually, it is the oxide of non-metals. For example, sulfurous acid (SO2), sulfuric acid (SO3), and carbonic acid (CO2) are acidic oxides. Thus, CO2 dissolves in water to give carbonic acid, and NO2 gives a mixture of nitrous and nitric acids. An inorganic anhydride (a somewhat archaic term) is an acid anhydride without an organic moiety.
Explanation:
word equation for water
Answer:
The actual reaction to make water is a bit more complicated: 2H2 + O2 = 2H2O + Energy. In English, the equation says: To produce two molecules of water (H2O), two molecules of diatomic hydrogen (H2) must be combined with one molecule of diatomic oxygen (O2). Energy will be released in the process.
Explanation:
The ph of a solution is 2. 0. Which statement is correct? useful formulas include startbracket upper h subscript 3 upper o superscript plus endbracket equals 10 superscript negative p h. , startbracket upper o upper h superscript minus endbracket equals 10 superscript negative p o h. , p h plus p o h equals 14. , and startbracket upper h subscript 3 upper o superscript plus endbracket startbracket upper o upper h superscript minus endbracket equals 10 to the negative 14 power. The poh of the solution is 12. 0. The concentration of oh– ions is 1. 0 mc021-5. Jpg 10–2 m. The concentration of upper h subscript 3 upper o superscript plus. Ions is 100. 0 m. The poh of the solution is 16. 0.
If the pH of the solution is 2.00. it follows that the pOH of the solution is 12.
What is pH?The term pH refers to the hydrogen ion concentration of the solution. It shows the degree of acidity in the solution. We also know that the pOH can be obtained from the pH using; pOH = 14-pH.
Hence, if the pH of the solution is 2.00. it follows that the pOH of the solution is 12.
Learn more about pH: https://brainly.com/question/15289741
The equilibrium for the reaction between (ch3)2nh a weak base
The equilibrium for the dissolution of the weak base is ;(CH3)2NH(aq) + H2O(l) ⇄ (CH3)2NH3^+(aq) + OH^-(aq)
What is a weak base?A weak base is one that does not ionize completely in solution. As such, a weak base will have a very low base dissociation constant Kb reflecting its minimal dissociation in solution.
The question is incomplete hence we are are unable to work out the equilibrium but in solution it will look like this;
(CH3)2NH(aq) + H2O(l) ⇄ (CH3)2NH3^+(aq) + OH^-(aq)
Learn more about weak base: https://brainly.com/question/4131966
The equilibrium for the reaction between (Ch₃)2NH of the weak base is (CH₃)2NH(aq) + H₂O(l) ⇄ (CH₃)2NH₃⁺(aq) + OH⁻(aq).
What are weak bases?A weak base is one that does not completely dissociate in water.
It leaves only a small proportion of hydroxide ions and the concerned basic radical in the resulting aqueous solution.
A large proportion of dissociated base molecules.
Thus, the equilibrium for the reaction is (CH₃)2NH(aq) + H₂O(l) ⇄ (CH₃)2NH₃⁺(aq) + OH⁻(aq).
Learn more about weak bases
https://brainly.com/question/19340043
#SPJ4
how much electrical energy (in kilowatt-hours) would a 60.0W light bulb use in 60.0 days ifvleft steadily
Answer:
60w x 24 = 1440wh per day
1440 x 60 = 86400 WATTS HOUR FOR 60 DAYS
Explanation:
In short.
86400/1000 = 86.4kwh
brainiest me :> THANK YOU!
Answer:
86.4kwh
Explanation:
PLEASE HELP
2. Calcium hydroxide, used to neutralize acid spills, reacts with hydrochloric acid to produce calcium
chloride and water. If you spilled 85.0 grams of hydrochloric acid and put 120 grams of calcium
hydroxide on it, which one is the limiting reactant? Answer:
Answer:
hydrochloric acid (HCl)
Explanation:
balanced equation: Ca(OH)2+2HCl -> CaCl2+2H2O
85.0/36=2.33 mol HCl
120/74=1.62 Ca(OH)2
2.33 mol HCl x 1 mol CaCl2/2 mol HCl = 1.165 mol CaCl2
1.62 mol Ca(OH)2 x 2 mol CaCl2/1 mol Ca(OH)2 = 3.24 mol CaCl2
Animals burrow into soil is this mechanical weathering or chemical weathering
Answer:
Animals also contribute to mechanical weathering. Digging animals such as moles break apart rocks underground, while the movement of animals on surface rock can scratch the rock's surface or exert pressure that causes the rock to crack.
Explanation:
pls brainlist me, correct me if I'm wrong
A compound has a percent composition of 38.7% carbon, 9.76% hydrogen, 51.5% oxygen.
Laboratory data shows that the compound's molar mass is 62.0 g/mol. What is the
molecular formula of the compound?
The molecular formula of the compound that has a percent composition of 38.7% carbon, 9.76% hydrogen, 51.5% oxygen is C2H6O2.
How to calculate molecular formula?The molecular formula can be calculated from the empirical formula. The empirical formula of the compound is calculated as follows:
C = 38.7% = 38.7gH = 9.76% = 9.76gO = 51.5% = 51.5gNext, we convert the mass to moles by dividing by their atomic mass:
C = 38.7 ÷ 12 = 3.23molH = 9.76 ÷ 1 = 9.76molO = 51.5÷ 16 = 3.22molNext, we divide by the smallest (3.22)
C = 1H = 3O = 1Hence, the empirical formula of the compound is CH3O
If the molar mass of the compound is 62g/mol;
(CH3O)n = 62
31n = 62
n = 2
(CH3O)2 = C2H6O2
Therefore, the molecular formula of the compound that has a percent composition of 38.7% carbon, 9.76% hydrogen, 51.5% oxygen is C2H6O2.
Learn more about molecular formula at: https://brainly.com/question/14425592
correct answer is A
a detailed explaination would be appreciated
Answer:
yh correct answer is A
Explanation:
the reason is because
.
Which molecule is a sugar molecule that can be broken down for energy?
Proteins
Peptides
Amino acids
Carbohydrates
Answer:
Carbohydrates
Explanation:
first of all, I took a quiz and got it right but also Carbohydrates fuel the body and are broken down and made into glucose that can be absorbed into the bloodstream. so when absorbed into the bloodstream they travel in the blood to the body's cells where they are used for respiration.
26. Which temperature change indicates an increase
il the average kinetic energy of the molecules in
a sample?
(1) 255 K to 0°C
(2) 355 K to 25°C
(3) 115°C to 298 K
(4) 37°C to 273 K
The temperature change that indicates an increase in the average kinetic energy of the molecules in a sample is 255 K to 0°C.
How does reactions occur?Chemical reactions occur when particles of reactants react or collide with one another, hence, when particles collide faster, reaction also occurs faster.
One of the ways to make reactions occur faster i.e. increasing the average kinetic energy is by increasing the temperature.
The example that depicts an increase in temperature is 255K to 0°C, which is equivalent to 255K to 273K.
Therefore, the temperature change that indicates an increase in the average kinetic energy of the molecules in a sample is 255 K to 0°C.
Learn more about temperature at: https://brainly.com/question/15267055
Given the following reaction, what is the conjugate acid of ammonia?
The ammonium ion is formed when ammonia accepts a proton from an acid.
What is conjugate acid?The term conjugate acid refers to a specie that is formed when a base accepts a proton. The conjugate acid of ammonia is the ammonium ion.
This is because, the ammonium ion is formed when ammonia accepts a proton from an acid.
Learn more about conjugate acid: https://brainly.com/question/12883745
True or false: water is weird. Normally the solid form of a substance is more
dense/compact than the liquid form. When water freezes it forms
crystalline structures that make the molecules spread out causing ice to be
less dense than water and float. This is true of all substances.
Answer:
this would be true friend :)
Explanation:
for density, it generally goes solids, liquids, then gas in order from most dense, to least dense.
please rate and mark as brainlest.
Using p and q as variables, write formulas for calculating the probability of an offspring from a population having each of the following genotypes
The genotypes are not found in the question, but p and q can be used to calculate genotypic frequencies by using the equation p2 + 2pq + q2 = 1.
What is the Hardy–Weinberg principle?The Hardy–Weinberg principle is a model used in population genetics to estimate allele and genotypic frequencies in a population.
According to the Hardy–Weinberg principle, the sum of p + q is equal to 1, where p and q represent the dominant and recessive alleles, respectively.
The Hardy–Weinberg principle considers the absence of different evolutionary forces acting on the population.
Learn more about Hardy–Weinberg principle here:
https://brainly.com/question/3406634
The formula for calculating the probability of an offspring from a population having each of the following genotypes is p2 + 2pq + q2 = 1.
What is the genotypic frequency?The number of people with a particular genotype divided by the total number of people in a population is known as genotype frequency.
p2 + 2pq + q2 = 1 is the Hardy Weinberg equation.
Thus, the formula for calculating the probability of an offspring from a population having each of the following genotypes is p2 + 2pq + q2 = 1.
Learn more about genotypic frequency
https://brainly.com/question/14214400
#SPJ4
Which of the following is not manufactured from high-density polythene?
A. Containers
B. Pipes
C. Candles
D. Toys
Hey there!
C. Candle
Explanation:
Answer. High-density polyethylene or HDPE is a thermoplastic polymer used in the production of plastic bottles, containers, corrosion-resistant pipes, etc. and not used for the production of candles. Commercially available candles are made with paraffin wax.
Consider the reaction 2NaN3 → 2Na + 3N2, which is the first reaction that occurs when an air bag expands in a car undergoing a collision. This reaction happens very quickly, as you might suspect.
A graph showing the amount of nitrogen gas (N2) could be best described as which sentence?
A.) The graph line’s general trend is decreasing from left to right.
B.) The graph line’s general trend is absolutely horizontal.
C.) The graph line’s general trend is nearly horizontal.
D.) The graph line’s general trend is increasing from left to right.
Answer:
D) The Graph line’s general trend is increasing from left to right.
Explanation:
N2, a product, will increase over time which means the line of the graph would go up over time. Time increases from left to right so the correct answer is D.
The graph that describes the reaction will have a trend in which the graph is decreasing from left to right.
What is a collision?A collision occurs when two particle bump into each other. We know that a reaction takes place when there is an effective collision between the reacting particles.
In this case, the graph that describes the reaction will have a trend in which the graph is decreasing from left to right.
Learn more about reaction:https://brainly.com/question/13110055?
#SPJ2
How to know if a single replacement reaction will occur
Answer:
To determine whether a given single replacement will occur, you must use an “Activity Series” table. If the metal or the halogen is above the element it will replace based on the activity series, a single displacement reaction will occur. The video below summarizes an experiment conducted to compare the activities of three metals ( Mg, Cu and Zn ).
Explanation:
Single replacement reaction will occur if any more active specie will add on the solution.
What is single displacement reaction?Single displacement reactions are those reactions in which one element from the given molecule is displaced by some other element.
Generally displacement reactions are shown by metals when more reactive metal is added in the solution of any another metal. Then more reactive metal displaces the metal which is already present in the solution and reaction is taking place is shown by changing in color.
Hence single displacement reaction will occur when more reactive metal is added in any solution.
To know more about single displacemen reaction, visit the below link:
https://brainly.com/question/13328989
#SPJ4
60 points please help me i will appreciate it!
Answer:
[tex]\huge\boxed{\sf T = 682.4 \ K}[/tex]
Explanation:
Given Data:
Mole = n = 0.1 mol
Pressure = P = 530 mmHg = 0.7 atm
Volume = v = 8 L
Ideal gas constant = R = 0.8206 L atm K⁻¹ mol⁻¹
Required:
Temperature = T = ?
Formula:
Pv = nRT
Solution:
Rearranging for T
[tex]\displaystyle T = \frac{Pv}{nR} \\\\T = \frac{(0.7)(8)}{(0.1)(0.08206)} \\\\T = \frac{5.6}{0.008206} \\\\T = 682.4 \ K\\\\\rule[225]{225}{2}[/tex]
Write balanced equations and expressions for ksp for the dissolution of each of the following ionic compounds. Write a balanced equation for the dissolution of baso4
Based on the dissolution equation of BaSO4, the solubility product, Ksp, expression of BaSO4 is: [Ba^{2+}] × [SO4^{2-}]
What is solubility product Ksp of a solute?The solubility product, Ksp, of a substance is an equilibrium constant which expresses the product of the concentration of ions produced by a solute.
The solubility of a solute depends on temperature, thus solubility product also depends on temperature.
The balanced equation for the dissolution of barium sulfate is given below:
BaSO4 ⇌ Ba^{2+} + SO4^{2-}The solubility product for barium sulfate is given as;
Ksp = [Ba^{2+}] × [SO4^{2-}]
Therefore, the solubility product, Ksp, expression of BaSO4 is: [Ba^{2+}] × [SO4^{2-}]
Learn more about solubility product at: https://brainly.com/question/26405952
How does acid react to water mixed with clorine eyedrops
Answer: Chlorine gas is produced when sulfuric acid is mixed with chlorine bleach.
Explanation: This reaction is a function of the change in pH of the solution from alkaline to acidic combined with the strong oxidant properties of hypochlorous acid.
Make sure to reword this in your words!!!what is fractional distinction?
Answer:
ANSWERFractional distillation is a technique used to separate miscible liquids that have boiling point difference of less than 25 ºC. The only difference in apparatus between simple and fractional distillation methods is the use of a fractionating column used during fractional distillation.[tex]\sf\large\underline\purple{Fractional\: Distillation:-}[/tex]
Fractional distillation is a type of distillation which involves the separation of miscible liquids.[tex]\rightarrow[/tex]The process involves repeated distillations and condensations and the mixture is usually separated into component parts. The separation happens when the mixture is heated at a certain temperature where fractions of the mixture start to vaporize.
[tex]\rightarrow[/tex]The basic principle of this type of distillation is that different liquids boil and evaporate at different temperatures. So when the mixture is heated, the substance with lower boiling point starts to boil first and convert into vapours.
[tex]\sf\underline\green{Applications\: Of\:Fractional\: Distillation:-}[/tex]
Fractional distillation is used for the purification of water as well as separating acetone and water.Fractional distillation is used in several industries like oil refineries and chemical plants mainly for purification and separation of many organic compounds.Fractional distillation is also used for the separation of (liquefied) air. Components like liquid nitrogen and oxygen as well as concentrated argon are obtained.Distillation is used in the production of high-purity silicon from chlorosilanes. The silicon is widely used in semiconductors.________________________________
Hope it helps you:)
CH4 + 2 02 > CO2 + 2 H2O
A scientist wants to completely burn 25 L of methane.
How many molecules of oxygen will the scientist need to
complete this experiment?
Answer:
mf i was trying to
find out the same thing
Explanation:
Classify the following substituents according to whether they are electron donors or electron acceptors relative to hydrogen by the resonance and the inductive mechanisms
Species that have a lone pair of electrons often donate electrons by resonance while substituents that are electron deficient take away electrons by resonance.
What is resonance?The term resonace has to do with the movement of electron pairs in a molecule. Inductive effects has to do with the drawing of electron density towards an atom or bond.
The two effects depends on the nature of a substituent. For instance, species that have a lone pair of electrons often donate electrons by resonance while substituents that are electron deficient take away electrons by resonance.
The question is incomplete hence the exact nature of the substituents can not be determined.
Learn more about resonance: https://brainly.com/question/23287285?
In resonance, the species with lone pairs donate electrons while the substituent takes electrons away from another species when deficient by resonance.
What is the Inductive and resonance effect?When the electron donor or the withdrawal groups creates the electron density on the molecule then it is called the inductive effect. This results in the creation of permanent dipoles in the bonds of the molecules.
Atom attached to a benzene molecule with higher electronegativity than hydrogen atom then, it will be an acceptor while with lower electronegativity will be a donor.
The movement of the electron pair like lone pair and pi bond in a molecule by the delocalization is called the resonance effect. The electron donation and acceptance depend on the nature of the substituent molecule.
If the atom attached to the benzene molecule is electron-rich, it will be a donor, while the electron-deficient will accept the electron by the method of resonance effect.
Therefore, the nature of the substituent determines the resonance and the inductive effect.
Learn more about inductive and resonance effects here:
https://brainly.com/question/21306067
#SPJ4
how many grams of kclo3 are needed to make 30.0 grams of kcl
The mass of potassium chlorate, KClO₃ needed to produce 30 grams of potassium chloride, KCl is 49.33 grams
Balanced equation2KClO₃ —> 2KCl + 3O₂
Molar mass of KClO₃ = 39 + 35.5 + (16×3) = 122.5 g/mol
Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g
Molar mass of Kcl= 39 + 35.5 = 74.5 g/mol
Mass of KCl from the balanced equation = 2 × 74.5 = 149 g
SUMMARY
From the balanced equation above,
149 g of KCl were obtained from 245 g of KClO₃
How to determine the mass of KClO₃ neededFrom the balanced equation above,
149 g of KCl were obtained from 245 g of KClO₃
Therefore,
30 g of KCl will be obtained from = (30 × 245) / 149 = 49.33 g of KClO₃
Thus, 49.33 g of KClO₃ are needed for the reaction
Learn more about stoichiometry:
https://brainly.com/question/14735801
Can someone please help me? :(
Answer:
Zone A
Explanation:
Because, when facing the sun, the "A" zones would be furthest from the sun, they get the least amount of sunlight (also shows why they are the coldest parts).
Which electromagnetic wave does the student replace the question mark with in the table?
A
radio waves
B
gamma rays
C
infrared waves
D
visible light waves
Answer:
B) Gamma
Explanation:
Gamma is by far the most powerful, and only one that can produce this much energy
option c is your answer.
Nitrogen is contained in which of the following?
a. adenine.
b. cytosine.
c. guanine.
d. thymine. d. uracil.
Answer:
DNA contains four nitrogen bases: adenine, thiamine, guanine and cytosine. Adenine and thymine pair, and guanine and cytosine pair.
Explanation:
In combination, nitrogen is found in the rain and soil as ammonia and ammonium salts and in seawater as ammonium (NH4+), nitrite (NO2−), and nitrate (NO3−) ions...
The chemical equation shows iron(iii) phosphate reacting with sodium sulfate. 2fepo4 3na2so4 right arrow. fe2(so4)3 2na3po4 what is the theoretical yield of fe2(so4)3 if 20.00 g of fepo4 reacts with an excess of na2so4? 26.52 g 53.04 g 150.8 g 399.9 g
Percentage yield tells the percentage ratio of actual to theoretical yield. The theoretical yield of iron(III) sulfate is 26.52 g.
What is a theoretical yield?The theoretical yield is the product formation from the complete modification of the limiting reagent in a chemical reaction.
The balanced chemical reaction is shown as,
[tex]\rm 2FePO_{4} + 3Na_{2}SO_{4} \rightarrow Fe_{2}(SO_{4})_{3} + 2Na_{3}PO_{4}[/tex]
Moles of ferric phosphate is calculated as:
[tex]\begin{aligned} \rm n &= \rm \dfrac{mass}{molar \; mass}\\\\&= \dfrac{20}{150.82}\\\\&= 0.1326\;\rm mol\end{aligned}[/tex]
From the reaction,
[tex]\dfrac{1 \;\rm mol \; Fe_{2}(SO_{4})_{3} }{2 \;\rm mol \; FePO_{4}}&= \dfrac{\rm X}{ 0.1326 \;\rm mol \; FePO_{4}}[/tex]
Solving for X:
[tex]\begin{aligned} \rm X &= (\dfrac{0.1326}{2}) \times 1 \rm \; mol\\\\&= 0.0663 \;\rm mol \;Fe_{2}(SO_{4})_{3}\end{aligned}[/tex]
Calculating mass from moles:
[tex]\begin{aligned}\rm mass &= \rm moles \times molar \rm \; mass\\\\&= 0.0663 \;\rm mol \times 399.88 \;\rm g/mol \\\\&= 26.51\;\rm g\end{aligned}[/tex]
Therefore, option A. 26.52 gm is the mass of iron(III) sulfate.
Learn more about theoretical yield here:
https://brainly.com/question/8575227
Answer:
A) 26.52
Explanation: