Answer:
C
Explanation:
Decision Support Systems (DSSs) model information using OLAP, helps in providing assistance to evaluate and choose among different course of action.
For option A, an insurance company using DSS to evaluate risk of providing insurance to drivers who doesn't have perfect records and option B and D medical doctor entering symptoms into a system to aid in diagnosing and treating patients and dentist entering symptoms into a system to help diagnose and treat patients respectively
The purpose of a good web page design is to make it
Answer:
Hi , so your answer is that a good web page design is to make it easy to use and meaningful and able to help people .
Explanation:
Really hope i helped , have a nice day :)
Answer: helpful for everyone
Explanation:
some student need help so then he can't find the answer in the other websites so it is department about communication
While saving a document to her hard drive, Connie's computer screen suddenly changed to display an error message on a blue background. The error code indicated that there was a problem with her computer's RAM. Connie's computer is affected by a(n) __________.
Answer:
The right answer is "Hardware crash".
Explanation:
According to the runtime error message, this same RAM on your machine was problematic. This excludes file interoperability or compliance problems as well as program error possibilities.Assuming implementation performance problems exist, the timeframe that would save the information would be typically longer, but there's still a lower possibility that the adequacy and effectiveness color will become blue but instead demonstrate warning would appear.Thus the above is the right solution.
3. It is used to measure the resistance on ohms and voltage that flow in circuit both AC and DC current. A. Gadget C. Electrical tape B. Voltage D. Multi-tester VOM
Answer:
the answer is D. Multi -tester VOM
It is used to measure the resistance on ohms and voltage that flow in the circuit both AC and DC current is D. Multi-tester VOM.
What does an ammeter degree?Ammeter, tool for measuring both direct or alternating electric powered modern, in amperes. An ammeter can degree an extensive variety of modern values due to the fact at excessive values most effective a small part of the modern is directed thru the meter mechanism; a shunt in parallel with the meter consists of the main portion. ammeter.
A multimeter or a multitester additionally referred to as a volt/ohm meter or VOM, is a digital measuring tool that mixes numerous size capabilities in a single unit. A traditional multimeter can also additionally encompass capabilities consisting of the capacity to degree voltage, modern and resistance.
Reda more about the Voltage:
https://brainly.com/question/24858512
#SPJ2
name any two objectives of a business
Explanation:
Growth – Another important objective of business is to achieve growth. The growth should be in terms of increase in profit, revenue, capacity, number of employees and employee prosperity, etc.
Stability – Stability means continuity of business. An enterprise or business should achieve stability in terms of customer satisfaction, creditworthiness, employee satisfaction etc. A stable organization can easily handle changing dynamics of markets.
A computer never gets tired or bored while working for a long time _______
Answer:
Diligence
Explanation:
The computer possess several qualities including tbe ability to be consistent with its task and accuracy of its output. When describing a person or machine that delivers so much over a long periodof time without being weary, bored or tired, such person or machine could be described as being Diligent. Depending on the task a computer is being used to execute, computer machines are usually being used in a non-stop manner. For instance, firms that works on shift basis may have 3 to 4 working shifts per day with each shift making use of the same computer used by the previous shift everyday for several number of days. Example are telecommunications customer service firms who work on a 24 hours basis.
Fill in the necessary blanks to list the name of each trip that does not start in New Hampshire (NH) Use the Colonial Adventure Tour Database listing found on the Canvas webpage under Databases or in the text.
SELECT TripName
FROM______
WHERE Trip____ ____NH:
Answer:
SELECT TripName
FROM AllTrips
WHERE Trip NOT LIKE ‘NH%'
Explanation:
Required
Fill in the blanks
The table name is not stated; so, I assumed the table name to be AllTrips.
The explanation is as follows:
This select the records in the TripName column
SELECT TripName
This specifies the table where the record is being selected
FROM AllTrips
This states the fetch condition
WHERE Trip NOT LIKE ‘NH%'
Note that:
The wild card 'NH%' means, record that begins with NHNot means oppositeSo, the clause NOT LIKE 'NH%' will return records that do not begin with NH
What has happened (or is still happening) to make this speech occur? armageddon
Answer:
Are you talking about the bruce willis is superman basically? Because if so i don't think so because that is a future event that hasn't happened yet also that film sucks.
Explanation:
kkklkkklkklklkklklklkklkl
Answer:
???
Explanation:
???
Saved In order to be used as a primary key, which of these characteristics must an attribute possess with respect to a single instance of the entity? Select all that apply. There must be a maximum of one attribute instance. There must be many instances of the attribute There must be at most one entity instance that each attribute instance describes. There must be at least one instance of the attribute. There must be zero or more instances of the attribute. Question 2 (2 points) True or false: A singular attribute is also known as a unique attribute. True False Question 3 (3 points) Saved Relationship names and types of relationship maxima or minima that each could have are listed below. Match each relationship in the list below to the type of relationship maxima or minima. Instructions: Choose your responses from the drop-down menus below. Response options cannot be used more than once. Minima is One-Zero 1 Person-Assigned Social SecurityNumber 4 Minima is Zero Zero 2 CubicleNumber-Assigned-to- Employee per shift 2 Maxima is One-Many 3. Birthdate-Recorded-for-a Person 1 Maxima is One One 4. Women-Bearing-Children Question 4 (2 points) Saved A ride-sharing app's discount system for riders is configured such that a ride discount is triggered only if at least two RiderlDs book a ride in the same Card at the same time. Which of the following is true of the relationship Ride Discount-is-Applicable?
The relationship minimum is Many-One.
The relationship minimum is Two-One.
The relationship maximum is One-Two.
The relationship minimum is One-Two.
Answer:
Saved In order to be used as a primary key, which of these characteristics must an attribute possess with respect to a single instance of the entity:
There must be a maximum of one attribute instance.
There must be many instances of the attribute.
There must be at most one entity instance that each attribute instance describes.
There must be at least one instance of the attribute.
A singular attribute is also known as a unique attribute. True
Saved Relationship names and types of relationship maxima or minima that each could have are listed below. True
Explanation:
what is web browser ?
Answer:
A web browser, or simply "browser," is an application used to access and view websites.
21
What does the following code print?
if 4 + 5 == 10:
print("TRUE")
else:
print("FALSE")
print("TRUE")
(2 Points)
Answer:
error
Explanation:
what is the Is option that prints the author of a file
Answer:
Print.. is your answer...
Suppose that the first goal in a GP problem is to make 3 X1 + 4 X2 approximately equal to 36. Using the deviational variables d1− and d1+, the following constraint can be used to express this goal.
3 X1 + 4 X2 + d1− − d1+ = 36
If we obtain a solution where X1 = 6 and X2 = 2, what values do the deviational variables assume?
a. d1− = 0, d1+ = 10
b. d1− = 6, d1+ = 0
c. d1− = 5, d1+ = 5
d. d1− = 10, d1+ = 0
Answer:
d. d1− = 10, d1+ = 0
Explanation:
Given
3X1 + 4X2 +d1− − d1+ = 36
X1 = 6
X2 = 2
Required
Possible values of d1- and d1+
We have:
3X1 + 4X2 +d1− − d1+ = 36
Substitute values for X1 and X2
3 *6 + 4 * 2 + d1- - d1+ = 36
18 + 8 + d1- - d1+ = 36
Collect like terms
d1- - d1+ = 36 - 18 - 8
d1- - d1+ = 10
For the above equation to be true, the following inequality must be true
d1- > d1+
Hence,
(d) is correct
Because:
10 > 0
solve the average of 4 numbers and display fail if grade is below 60
Need a better discription of the question to finalize an answer.
Write a C program that uses a while statement to determine and print the largest of 10 numbers input by the user. Your program should use three variables, as follows: a) counter--A counter to count to 10 (i.e., to keep track of how many numbers have been input and to determine when all 10 numbers have been processed). by) number--The current number input to the program. c) largest--The largest number found so far.
Answer:
The program in C is as follows:
#include <limits.h>
#include <stdio.h>
int main(){
int count = 0;
int number, largest = INT_MIN;
while(count<10){
scanf("%d",&number);
if(number>largest){
largest = number; }
count++; }
printf("Largest: %d",largest);
return 0;
}
Explanation:
This initializes count to 0
int count = 0;
This declares number and largest; largest is also initialized to the smallest integer
int number, largest = INT_MIN;
This loop is repeated while count is less than 10
while(count<10){
Get each number
scanf("%d",&number);
If current input is greater than the largest integer, largest is updated to the current input
if(number>largest){
largest = number; }
Increase count by 1
count++; }
Print the largest
printf("Largest: %d",largest);
Determine whether or not the following pairs of predicates are unifiable. If they are, give the most-general unifier and show the result of applying the substitution to each predicate. If they are not unifiable, indicate why. Assume that x, y, and z are variables, while other symbols are either predicates, constants, or functions.
a) P(B,A,B), P(x,y,z)
b) P(x,x), Q(A,A)
c) Older(Father(y),y), Older(Father(x),John).
d) Q(G(y,z),G(z,y)), Q(G(x,x),G(A,B)
e) P(f(x), x, g(x)), P(f(y), A, z)
Answer:
a) P(B,A,B), P(x,y,z)
=> P(B,A,B) , P(B,A,B}
Hence, most general unifier = {x/B , y/A , z/B }.
b. P(x,x), Q(A,A)
No mgu exists for this expression as any substitution will not make P(x,x), Q(A, A) equal as one function is of P and the other is of Q.
c. Older(Father(y),y), Older(Father(x),John)
Thus , mgu ={ y/x , x/John }.
d) Q(G(y,z),G(z,y)), Q(G(x,x),G(A,B))
=> Q(G(x,x),G(x,x)), Q(G(x,x),G(A,B))
This is not unifiable as x cannot be bound for both A and B.
e) P(f(x), x, g(x)), P(f(y), A, z)
=> P(f(A), A, g(A)), P(f(A), A, g(A))
Thus , mgu = {x/y, z/y , y/A }.
Explanation:
Unification: Any substitution that makes two expressions equal is called a unifier.
a) P(B,A,B), P(x,y,z)
Use { x/B}
=> P(B,A,B) , P(B,y,z)
Now use {y/A}
=> P(B,A,B) , P(B,A,z)
Now, use {z/B}
=> P(B,A,B) , P(B,A,B}
Hence, most general unifier = {x/B , y/A , z/B }
b. P(x,x), Q(A,A)
No mgu exists for this expression as any substitution will not make P(x,x), Q(A, A) equal as one function is of P and the other is of Q
c. Older(Father(y),y), Older(Father(x),John)
Use {y/x}
=> Older(Father(x),x), Older(Father(x),John)
Now use { x/John }
=> Older(Father(John), John), Older(Father(John), John)
Thus , mgu ={ y/x , x/John }
d) Q(G(y,z),G(z,y)), Q(G(x,x),G(A,B))
Use { y/x }
=> Q(G(x,z),G(z,x)), Q(G(x,x),G(A,B))
Use {z/x}
=> Q(G(x,x),G(x,x)), Q(G(x,x),G(A,B))
This is not unifiable as x cannot be bound for both A and B
e) P(f(x), x, g(x)), P(f(y), A, z)
Use {x/y}
=> P(f(y), y, g(y)), P(f(y), A, z)
Now use {z/g(y)}
P(f(y), y, g(y)), P(f(y), A, g(y))
Now use {y/A}
=> P(f(A), A, g(A)), P(f(A), A, g(A))
Thus , mgu = {x/y, z/y , y/A }.
Which of the following is NOT a feature of unclustered index
A. There can be several unclustered indexes on a data file
B. unclustered indexes are cheap to maintain and update
C. un Clustered index has the same ordering of data records as that of the data entries in the database
D. unClustered index has a different ordering of data records as that of the data entries in the database
Answer:
C. Unclustered index has the same ordering of data records as that of the data entries in the database
Explanation:
Indexes are used to split up queries in an SQL server or database management system DBMS.
There are two types of indexes namely clustered indexed and unclustered indexes.
Clustered indexes define the order in which data is stored in a table while unclustered index does not sort the order in a table.
In an unclustered index, the data table and the index are stored in different places, they are easy to maintain and update since they do not follow a particular order and there can be several indexes in a data file since the data table is stored differently from the index file.
So, all the other options except C are features of unclustered indexes since unclustered index does not have the same ordering of data records as that of the data entries in the database.
So, C is the answer.
Reverse Word Order: Write a program that reverses the order of the words in a given sentence. This program requires reversing the order of the words wherein the first and last words are swapped, followed by swapping the second word with the second to last word, followed by swapping the third word and the third to last words, and so on. Your program will ask the user for an input string and print out the resultant string where the order of the words is reversed. Please see the hints section for more details on an example algorithm. Assume a maximum C-string size of 1000 characters. Make sure your code works for any input number, not just the test cases. Your code will be tested on other test cases not listed here. Do Not Use Predefined Functions from the cstring Library. Please properly comment your code before submission.For this part of the assignment, name your source file as Reverse Word Order_WSUID.cpp. For example, if your user ID is A999B999 name your file as Reverse Word Order_A999B999.cpp. Sample Test Cases: Test Case 1: Input: London bridge has been abducted Output: abducted been has bridge London Test Case 2: Input: Hello World Output: World Hello Test Case 3: Input: Hello World, how are you? Output: you? Are how World, HelloTest Case 4: Input: I like toast Output: toast like l
Answer:
The program in C++ is as follows:
#include <bits/stdc++.h>
using namespace std;
int main(){
string sentence,word="";
getline (cin, sentence);
vector<string> for_reverse;
for (int i = 0; i < sentence.length(); i++){
if (sentence[i] == ' ') {
for_reverse.push_back(word);
word = ""; }
else{ word += sentence[i];} }
for_reverse.push_back(word);
sentence="";
for (int i = for_reverse.size() - 1; i > 0; i--){
sentence+=for_reverse[i]+" ";}
sentence+=for_reverse[0];
cout<<sentence<<endl;
return 0;
}
Explanation:
This declares sentence and word as strings; word is then initialized to an empty string
string sentence,word="";
This gets input for sentence
getline (cin, sentence);
This creates a string vector to reverse the input sentence
vector<string> for_reverse;
This iterates through the sentence
for (int i = 0; i < sentence.length(); i++){
This pushes each word of the sentence to the vector when space is encountered
if (sentence[i] == ' ') {
for_reverse.push_back(word);
Initialize word to empty string
word = ""; }
If the encountered character is not a blank space, the character is added to the current word
else{ word += sentence[i];} }
This pushes the last word to the vector
for_reverse.push_back(word);
This initializes sentence to an empty string
sentence="";
This iterates through the vector
for (int i = for_reverse.size() - 1; i > 0; i--){
This generates the reversed sentence
sentence+=for_reverse[i]+" ";}
This adds the first word to the end of the sentence
sentence+=for_reverse[0];
Print the sentence
cout<<sentence<<endl;
Write a single Python regular expression for each of the following. Note: For each problem, you must use only ONE regular expression.
Matches a string that has both the substring dog and cat in the string in either order. For instance, both of the following strings match: 'The dog chased the cat' and 'xxcatxxdogxx'.
which one is exit controllefd loop ?
1.while loop
2. for loop
3. do loop
4. none
Answer:
2 is the ans
Explanation:
bye bye, gonna go to studyy
Write a procedure named Read10 that reads exactly ten characters from standard input into an array of BYTE named myString. Use the LOOP instruction with indirect addressing, and call the ReadChar procedure from the book's link library. (ReadChar returns its value in AL.)
Answer:
Following are the solution to the given question:
Explanation:
Since a procedure has the Read10 parameter, the 10 characters from the input file are stored in the BYTE array as myString. The LOOP instruction, which includes indirect addressing and also the call to the ReadChar method, please find the attached file of the procedure:
Construir un pseudocódigo que permita ingresar la temperatura de una ciudad. Si ingresa un valor mayor a 20 debe mostrar "Temperatura alta", si es mayor de 10 y menor o igual a 20 debe mostrar "Temperatura normal", caso contrario debe mostrar "Temperatura baja"
Answer:
VARIABLES
Real temperatura
ALGORITMO
Si temperatura > 20 haga:
Escriba "Temperatura alta"
Fin-Si
Si temperatura > 10 y temperatura <= 20 haga:
Escriba "Temperatura normal"
Fin-Si
Sino:
Escriba "Temperatura baja"
Fin-Si
Explanation:
A continuación, describimos el pseudocódigo para lograr las funcionalidades deseadas:
VARIABLES
Real temperatura
ALGORITMO
Si temperatura > 20 haga:
Escriba "Temperatura alta"
Fin-Si
Si temperatura > 10 y temperatura <= 20 haga:
Escriba "Temperatura normal"
Fin-Si
Sino:
Escriba "Temperatura baja"
Fin-Si
Design traffic lights at an intersection of a city. North and South (up and down) are going to be a main highway, East and West (right and left) will be a smaller cross street. There will be no turn signals and no cross walks. You only need to build/code one set of lights for each street (one set of green, yellow, and red for the highway, and another set for the cross street). You do not need to build actual traffic lights or an intersection.
Answer:
Explanation:
The following code is written in Java. In order to code this efficiently, I created a class for the trafficLights. The class contains the currentLight, and the streetType as variables and contains a constructore, getter and setter methods, and a method to turn to the next light in the sequence. Then I created 4 objects of TrafficLights for the highways and the streets.
class Brainly {
public static void main(String[] args) {
TrafficLights highwaySouth = new TrafficLights("Highway", "green");
TrafficLights highwayNorth = new TrafficLights("Highway", "green");
TrafficLights streetEast = new TrafficLights("Street", "yellow");
TrafficLights streetWest = new TrafficLights("Street", "red");
}
}
class TrafficLights {
String streetType, currentLight;
public TrafficLights(String streetType, String currentLight) {
this.streetType = streetType;
this.currentLight = currentLight;
}
public void nextLight() {
if (this.currentLight == "green") {
this.currentLight = "yellow";
} else if (this.currentLight == "yellow") {
this.currentLight = "red";
} else {
this.currentLight = "green";
}
}
public String getStreetType() {
return streetType;
}
public void setStreetType(String streetType) {
this.streetType = streetType;
}
public String getCurrentLight() {
return currentLight;
}
public void setCurrentLight(String currentLight) {
this.currentLight = currentLight;
}
}
52. Which of the following numbering system is used by the computer to display numbers? A. Binary B. Octal C. Decimal D. Hexadecimal
Answer:
Computers use Zeroes and ones and this system is called
A. BINARY SYSTEM
hope it helps
have a nice day
Làm thế nào để hack mật khẩu trên 1 trang web
The input to the function/method consists of two arguments.
a. True
b. False
Answer:
See Explanation
Explanation:
The function is not given. So, I will provide general explanation.
A function is defined as:
return-type function-name(argument-lists)
For instance, an int function that has 1 argument is:
int Myfunc(int num)
num is the argument of the function Myfunc
So, an example of a function with two arguments is:
int Myfunc(int num, string name)
So, examine the function in the complete question; then count the number of arguments to determine if the answer is true or false.
Write a program that first reads in the name of an input file and then reads the input file using the file.readlines() method. The input file contains an unsorted list of number of seasons followed by the corresponding TV show. Your program should put the contents of the input file into a dictionary where the number of seasons are the keys, and a list of TV shows are the values (since multiple shows could have the same number of seasons).
Sort the dictionary by key (least to greatest) and output the results to a file named output_keys.txt, separating multiple TV shows associated with the same key with a semicolon (;). Next, sort the dictionary by values (alphabetical order), and output the results to a file named output_titles.txt.
Ex: If the input is:
file1.txt
and the contents of file1.txt are:
20
Gunsmoke
30
The Simpsons
10
Will & Grace
14
Dallas
20
Law & Order
12
Murder, She Wrote
the file output_keys.txt should contain:
10: Will & Grace
12: Murder, She Wrote
14: Dallas
20: Gunsmoke; Law & Order
30: The Simpsons
and the file output_titles.txt should contain:
Dallas
Gunsmoke
Law & Order
Murder, She Wrote
The Simpsons
Will & Grace
Note: There is a newline at the end of each output file, and file1.txt is available to download.
currently, my code is:
def readFile(filename):
dict = {}
with open(filename, 'r') as infile:
lines = infile.readlines()
for index in range(0, len(lines) - 1, 2):
if lines[index].strip()=='':continue
count = int(lines[index].strip())
name = lines[index + 1].strip()
if count in dict.keys():
name_list = dict.get(count)
name_list.append(name)
name_list.sort()
else:
dict[count] = [name]
return dict
def output_keys(dict, filename):
with open(filename,'w+') as outfile:
for key in sorted(dict.keys()):
outfile.write('{}: {}\n'.format(key,';'.join(dict.get(key))))
print('{}: {}\n'.format(key,';'.join(dict.get(key))))
def output_titles(dict, filename):
titles = []
for title in dict.values():
titles.extend(title)
with open(filename,'w+') as outfile:
for title in sorted(titles):
outfile.write('{}\n'.format(title))
print(title)
def main():
filename = input()
dict = readFile(filename)
if dict is None:
print('Error: Invalid file name provided: {}'.format(filename))
return
output_filename_1 ='output_keys.txt'
output_filename_2 ='output_titles.txt'
output_keys(dict,output_filename_1)
print()
output_titles(dict,output_filename_2)
main()
The problem is that when I go to submit and the input changes, my output differs.
Output differs. See highlights below. Special character legend Input file2.txt Your output 7: Lux Video Theatre; Medium; Rules of Engagement 8: Barney Miller;Castle; Mama 10: Friends; Modern Family; Smallville;Will & Grace 11: Cheers;The Jeffersons 12: Murder, She Wrote;NYPD Blue 14: Bonanza;Dallas 15: ER 20: Gunsmoke; Law & Order; Law & Order: Special Victims Unit 30: The Simpsons Expected output 7: Rules of Engagement; Medium; Lux Video Theatre 8: Mama; Barney Miller; Castle 10: Will & Grace; Smallville; Modern Family; Friends 11: Cheers; The Jeffersons 12: Murder, She Wrote; NYPD Blue 14: Dallas; Bonanza 15: ER 20: Gunsmoke; Law & Order; Law & Order: Special Victims Unit 30: The Simpsons
Answer:
Explanation:
The following is written in Python. It creates the dictionary as requested and prints it out to the output file as requested using the correct format for various shows with the same number of seasons.The output can be seen in the attached picture below.
mydict = {}
with open("file1.txt", "r") as showFile:
for line in showFile:
cleanString = line.strip()
seasons = 0
try:
seasons = int(cleanString)
print(type(seasons))
except:
pass
if seasons != 0:
showName = showFile.readline()
if seasons in mydict:
mydict[seasons].append(showName.strip())
else:
mydict[seasons] = [showName.strip()]
f = open("output.txt", "a")
finalString = ''
for seasons in mydict:
finalString += str(seasons) + ": "
for show in mydict[seasons]:
finalString += show + '; '
f.write(finalString[:-2] + '\n')
finalString = ''
f.close()
is joining Together as a group to use a specific product more efficiently
[tex]\sf\purple{Collaborative \:consumption}[/tex] is joining together as a group to use a specific product more efficiently.
[tex]\bold{ \green{ \star{ \orange{Hope\:it\:helps.}}}}⋆[/tex]
mention three external power problems that affect computer's internal power supply ,if computer is plugged in the wall.
Answer:
Explanation: here are three subsets of regulated power supplies: linear, switched, and battery-based. Of the three basic regulated power supply designs, linear is the least complicated system, but switched and battery power have their advantages.
electronic age,what format/equipment people use to communicate with each other?
Answer:
They share or broadcast information by making a letter or information in a papyrus material. in industrial age they use Telegraph or typewriter to communicate each other.
In electronic age, people use electronic medium for communication, like emails and messegers.