Dana read this statement in a book about softball.

The diameter of a softball is 0.304 meter.

Which completes the statement as it would be heard?
The diameter of a softball is ______.

Answer:

27.87

Step-by-step explanation:

In a right triangle, the length of the hypotenuse can be found using the Pythagorean theorem, which states that the sum of the squares of the two shorter sides is equal to the square of the length of the hypotenuse.

Using the given sides, we can write the equation:

AB^2 + BC^2 = AC^2

Substituting the given values, we have:

17^2 + 22^2 = AC^2

Simplifying the left side, we get:

289 + 484 = AC^2

773 = AC^2

Taking the square root of both sides, we find:

AC = √773 = 27.87

Rounding to two decimal places, the length of side AC is approximately 27.87.

Answer:

[tex]\displaystyle \int {xe^{5x}} \, dx=\frac{1}{5}xe^{5x}-\frac{1}{25}e^{5x}+C[/tex]

Step-by-step explanation:

Given Problem

[tex]\displaystyle \int {xe^{5x}} \, dx[/tex]

Make substitutions for IBP

Let [tex]u=x,\,du=dx[/tex] and [tex]v=\frac{1}{5}e^{5x},\,dv=e^{5x}dx[/tex]

Perform IBP

[tex]\displaystyle \int {u} \,dv=uv-\int {v} \, du\\\\\int {xe^{5x}} \, dx=\frac{1}{5}xe^{5x} -\int {\frac{1}{5}e^{5x}} \, dx\\\\\displaystyle \int {xe^{5x}} \, dx=\frac{1}{5}xe^{5x}-\frac{1}{25}e^{5x}+C[/tex]

Answer:  k=(1/5)

Step-by-step explanation:

By using tool, graph of the quadratic function f (x) = x² + 10x + 24 is shown in figure.

And, Vertex = (- 5, - 1)

A point on graph = (- 6, 0)

An algebraic equation with the second degree of the variable is called an Quadratic equation.

Given that;

The quadratic function is,

⇒ f (x) = x² + 10x + 24

Now, By using tool we can draw the quadratic function f (x) = x² + 10x + 24 is shown in figure.

And, By figure of the quadratic function f (x) = x² + 10x + 24, we get;

Vertex = (- 5, - 1)

A point on graph = (- 6, 0)

Learn more about the quadratic equation visit:

brainly.com/question/1214333

#SPJ1

Answer:

(-5, -1) & (-6, 0)

Step-by-step explanation:

Just finished the test and this was correct. Hope this was helpful!!

Answer:

[tex]-6[/tex]

Step-by-step explanation:

[tex]-5.f(-2) - 3g(7)[/tex]

The values of [tex]f(-2)[/tex] and [tex]g(7)[/tex] have to be read and deduced from the respective [tex]f(x)[/tex] and [tex]g(x)[/tex] graphs

[tex]f(-2)[/tex]:

For x = [tex]-2[/tex], draw a straight vertical line connecting x = [tex]-2[/tex] and the blue [tex]f(x)[/tex] graph. It can be observed that the the blue [tex]f(x)[/tex] graph is touching the x-axis at x = [tex]-2[/tex]. Therefore, the corresponding y [or [tex]f(x)[/tex]] value is 0.

[tex]g(7)[/tex]:

For x = 7, draw a straight vertical line connecting x = 7 and the red dashed [tex]g(x)[/tex] graph. Then (from this meeting point) draw a straight horizontal line that touches the y-axis. It can be observed that the corresponding y [or [tex]g(x)[/tex]] value is 2

Now substitute the deduced values in the expression:

[tex]-5.[/tex](0) [tex]-3.[/tex](2) = [tex]0 - 6[/tex]

                     = [tex]-6[/tex]

Answer:

The $30,000 in revenue should be entered as a credit in the journal entry.

Step-by-step explanation:

In accounting, revenues are recorded as credits, which means that they increase the credit side of the accounting equation (revenues increase equity, which is a credit account). Debits, on the other hand, are used to record expenses and decreases in assets.Therefore, the journal entry to record $30,000 in revenue for the business on October 1 would be:Date

Account Account Number Debit Credit

1 - Oct Revenue 4050 30,000Since revenue is being credited, there is no debit amount entered in this entry. The credit amount of $30,000 is entered in the credit column, as shown above.

a. there are three vectors in {a₁, a₂, a₃}.

b. There are infinitely many vectors in W = span {a₁, a₂, a₃} by definition.

c. we have that a₁ is in the W.

A matrix is a set of integers arranged in rows and columns. The rows and columns of integers are arranged in a rectangular matrix. The matrix A, for instance, contains two rows and three columns. The elements of the matrix, also known as the entries, are the integers. In addition to many areas of mathematics, matrices are widely used in the fields of engineering, physics, economics, and statistics.

a. The vector b is not in {a₁ ,a₂, a₃} since b is not equal to any of the column vectors of A. Clearly, there are three vectors in {a₁, a₂, a₃}.

b. Vector b is in W if the augmented matrix [a₁, a₂, a₃ b] is consistent.

The augmented matrix is:

[tex]\left[\begin{array}{cccc}1&0&-4&4\\0&3&-2&1\\-2&6&3&-4\end{array}\right] \sim \left[\begin{array}{cccc}1&0&-4&4\\0&3&-2&1\\0&6&-5&4\end{array}\right] \sim \left[\begin{array}{cccc}1&0&-4&4\\0&3&-2&1\\0&6&-1&2\end{array}\right][/tex]

Thus, since the system is consistent we have that b must be in W.

There are infinitely many vectors in W = span {a₁, a₂, a₃} by definition.

c. since   [tex]\left[\begin{array}{c}1\\0\\-2\end{array}\right] = 1. \left[\begin{array}{c}1\\0\\-2\end{array}\right] + 0. \left[\begin{array}{c}1\\0\\-2\end{array}\right] + 0. \left[\begin{array}{c}1\\0\\-2\end{array}\right][/tex] we have that a₁ is in the W.

To know more about matrix refer to:

brainly.com/question/1279486

#SPJ4

a. there are three vectors in {a₁, a₂, a₃}.

b. There are infinitely many vectors in W = span {a₁, a₂, a₃} by definition.

c. we have that a₁ is in the W.

A matrix is a set of integers arranged in rows and columns. The rows and columns of integers are arranged in a rectangular matrix. The matrix A, for instance, contains two rows and three columns. The elements of the matrix, also known as the entries, are the integers. In addition to many areas of mathematics, matrices are widely used in the fields of engineering, physics, economics, and statistics.

a. The vector b is not in {a₁ ,a₂, a₃} since b is not equal to any of the column vectors of A. Clearly, there are three vectors in {a₁, a₂, a₃}.

b. Vector b is in W if the augmented matrix [a₁, a₂, a₃ b] is consistent.

No, b is not in {a1, a2, a3}.

There are 3 vectors in {a1, a2, a3}.

Yes, b is in W.

There are infinitely many vectors in W.

Yes, a1 is in W because it can be expressed as a linear combination of the vectors in W. This is shown by the equation a1 = 1(a1) + 0(a2) + 0(a3).  The coefficients of the vectors in the linear combination are all integers and this equation shows that a1 is in the span of the vectors in W.

Thus, since the system is consistent we have that b must be in W.

There are infinitely many vectors in W = span {a₁, a₂, a₃} by definition.

c. since we have that a₁ is in the W.

To know more about matrix refer to:

brainly.com/question/1279486

#SPJ4

Answer:

[tex] \frac{14}{16} \: and \: \frac{13}{16} [/tex]

Step-by-step explanation:

So we have these two fractions

[tex] \frac{7}{8} \: and \: \frac{13}{16} [/tex]

Does 8 go into 16? Yes. It goes in twice because 8 times 2 is 16. That means 16 is our common denominator.

Because of that, since we multiplied 8 by 2, we will do the same to the 7. 7 times 2 is 14.

Because of that we have 14/16 and 13/16 as our answers.

The first step is to rewrite the equations in standard form by subtracting the constant from each side.

Standard form is a type of numerical notation used to express large numbers in a concise form. It is based on powers of 10, which means each place value of a number is multiplied by a power of 10. Standard form is typically used in scientific and mathematical applications, and it is also known as scientific notation. To write a number in standard form, the number is written as a coefficient, followed by the base of 10, raised to an exponent.

3x - 2y = 10  becomes  3x - 2y - 10 = 0

3x - y = 17 becomes 3x - y - 17 = 0

Let's multiply the first equation by 2 and the second equation by 3.

2(3x - 2y - 10) = 0

3(3x - y - 17) = 0

6x - 4y - 20 = 0

9x - 3y - 51 = 0

The next step is to add the two equations together.

6x - 4y - 20 + 9x - 3y - 51 = 0

15x - 7y - 71 = 0

The last step is to solve for the variable.

15x - 7y = 71

15x = 71 + 7y

x = (71 + 7y)/15

To learn more about standard form
https://brainly.com/question/19169731
#SPJ1

Equations that represent circles that have a diameter of 12 units and a center that lies on the y-axis are

x² + (y - 3)² = 36 and x² + (y + 8)² = 36

A circle is a shape consisting of all points in a plane that are at a given distance from a given point, the center, it is the curve traced out by a point that moves in a plane so that its distance from a given point is constant.

Given equations

⇒ x² + (y - 3)² = 36

comparing with general equation of circle

( x - h )² + ( y - k )² = r²

Center (h , k) = (0 , 3)

Center is on y - axis

Radius r = √36 = 6units

Diameter = 2r = 2×6 = 12units

⇒ x² + (y - 5)² = 6

comparing with general equation of circle

( x - h )² + ( y - k )² = r²

Center (h , k) = (0 , 5)

Center is on y-axis

Radius r = √6 units

Diameter = 2r = 2√6 units

⇒ (x – 4)² + y² = 36

comparing with general equation of circle

( x - h )² + ( y - k )² = r²

Center (h , k) = (4 , 0)

Center is on x-axis

Radius r = √36 = 6units

Diameter = 2r = 2×6 = 12units

⇒ (x + 6)² + y² = 144

comparing with general equation of circle

( x - h )² + ( y - k )² = r²

Center (h , k) = (-6 , 0)

center is on x-axis

Radius r = √144 = 16units

Diameter = 2r = 2×16 = 32units

⇒ x² + (y + 8)² = 36

comparing with general equation of circle

( x - h )² + ( y - k )² = r²

Center (h , k) = (0 , -8)

Center is on y-axis.

Radius r = √36 = 6units

Diameter = 2r = 2×6 = 12units

Hence, equation x² + (y - 3)² = 36 and x² + (y + 8)² = 36 represents the circle with diameter 12 units and a center that lies on y-axis.

Learn more about circle here:

https://brainly.com/question/29142813

#SPJ1

Answer: 9 - 36n

Step-by-step explanation: So, first you multiply 9 by 1 and 9 by 4n, which gives you 9 - 36n.

Answer:

n=1/4

Step-by-step explanation:

9(1-4n)

Distribute the 9 to create the equation 9-36n.

Now set it equal to zero.

9-36n = 0

Add 36n to both sides to get 9 = 36n

Now divide by sides by 36 to get 9/36 = n

Now simplify your fraction 9/36 = 1/4 so 1/4=n

The probability of buying 3 tires is 0.05 and the cumulative probability distribution table is created.

What is meant by probability?

The area of mathematics known as probability deals with numerical representations of the likelihood that an event will occur or that a statement is true. An event's probability is a number between 0 and 1, where, roughly speaking, 0 denotes the event's impossibility and 1 denotes certainty.

Given,

     Percentage of people who buys 4 tires = 50%

      Percentage of people who buys 2 tires = 32%

      Percentage of people who buys less than 2 tires = 13%

    Percentage of people who buys none = 6%

a) Prob(X=0) = 0.06

    Prob(X=2)  = 0.32

   Prob(X=4)  = 0.50

 Prob(X < 2) = Prob(X=0) + prob(X=1) = 0.06+ prob(X=1)

   prob(X=1) =   Prob(X < 2) - 0.06  = 0.13 - 0.06 = 0.07

Therefore prob(X = 3) = 1 - ( 0.5+0.32+0.07+0.06) = 1 - 0.95 = 0.05 = 5%

b) Cumulative probability distribution is as given in the figure.

Therefore the probability of buying 3 tires is 0.05 and the cumulative probability distribution table is created.

To learn more about probability, follow the link.

https://brainly.com/question/13604758

#SPJ4

Answer:

Step-by-step explanation:

If you work 55 hours in one week and earn $15 per hour, your gross pay before taking into account any overtime can be calculated as follows:

Gross pay = 55 hours x $15/hour = $825

If you work overtime, which is time and a half, the additional pay can be calculated as follows:

Overtime pay = ($15/hour x 1.5) x (55 hours - 40 hours) = ($22.50/hour x 15 hours) = $337.50

So, the total gross pay including the overtime pay is:

Gross pay = $825 + $337.50 = $1,162.50

Therefore, the total gross pay for working 55 hours in one week at $15 per hour, with overtime pay calculated as time and a half, is $1,162.50.

The mean is sensitive to outliers and will not accurately represent the center of the data if the distribution is significantly skewed.

The mean is a measure of central tendency that is calculated by adding up all values in a dataset and dividing by the number of values. It is often used as a measure of average since it takes into account all values in the dataset. However, it is an inappropriate measure of central tendency when the data distribution is severely skewed. A skewed distribution is one in which the data is not distributed evenly around the mean, and the data is either concentrated in the lower or higher end of the range. Since the mean is sensitive to outliers, it will be greatly affected by these values and not accurately represent the center of the data. In this case, it is more appropriate to use the median as a measure of central tendency since it is not affected by outliers. The median is the middle value of a dataset when the data is sorted from smallest to largest and is a better representation of the true center of the data in a skewed distribution.

Learn more about mean here

https://brainly.com/question/15323584

#SPJ4

It is a translation of 3 units up and one unit to the left,  then the correct option is D.

For any function y = f(x), we can define:

A vertical translation of N units as:

g(x) =f(x) + N

if N > 0, the translation is up

if N < 0, the translation is down.

A horizontal translation of N units as:

g(x) =f(x + N)

if N > 0, the translation is left

if N < 0, the translation is to the right.

Here we have:

g(x) = f(x + 1) + 3

So we have a translation of 1 unit to the left and 3 units up.

The correct option is d.

Learn more about translations at:

https://brainly.com/question/24850937

#SPJ1

Hi there, here's your answer:

Highest temperature = 18 degrees

Least temperature = -5 degrees

The difference between the two is 18 - (-5) = 18 + 5 = 23 degrees

Hope it helps!

Please mark as brainliest!

Answer:

(3x-2)(10x+3)

Step-by-step explanation:

The coordinates after the rotation of 90° will be (-2, -3), (3, 4), and (4, -5) respectively.

Each point in a figure is transformed into a rotation by rotating it a specific amount of degrees around another point.

Precession, nutation, and intrinsic rotation are the names of these rotations.

Shapes can be rotated by being moved around a fixed point (clockwise or anticlockwise, and by a certain number of degrees).

Although the shape will remain precisely the same, its location within the room will shift.

So, we have:

(-3,2),(4,-3) and (-5,-4)

Now, the graph then as follows.

Now, rotate them to 90°.

(Refer to the graph attached below)

Then, the coordinates after 90° rotation will be:

(-3,2) = (-2, -3)

(4,-3) = (3, 4)

(-5,-4) = (4, -5)

Therefore, the coordinates after the rotation of 90° will be (-2, -3), (3, 4), and (4, -5) respectively.

Know more about geometry rotation here:

https://brainly.com/question/26249005

#SPJ1

The number of tractors that should be produced to incur the minimum cost will be 300.

For the maximum value of the function if f''(x) < 0 and for the minimum value of the function if f''(x) > 0.

The maximum and minimum value of the function is at f'(x) = 0.

The function is given below.

C(x) = 11000 − 60x + 0.1x²

Differentiate the function with respect to x, then we have

C'(x) = 0

(d/dx)(11000 − 60x + 0.1x²) = 0

− 60 + 0.2x = 0

0.2x = 60

x = 300

The number of tractors that should be produced to incur the minimum cost will be 300.

More about the maxima and minima links are given below.

https://brainly.com/question/12870695

#SPJ1

Answer:

Any odd number multiplied by an even number will make an even number.

Answer:

Time (min) Distance (km)

6       9

12      18

24     36

15     45

Step-by-step explanation:

The table shows equivalent ratios between time in minutes and distance in kilometers. An equivalent ratio means that the ratio of time to distance stays the same, even though the numbers themselves change.

For example, in the first row, the ratio of time to distance is 6 minutes to 9 kilometers. In the second row, the ratio of time to distance is 12 minutes to 18 kilometers. Despite the change in numbers, the ratio of time to distance remains the same. This is why these ratios are considered equivalent.

The equation that determines the intersection of line with a clipping triangle is ax + by + c = 0 [1]. The solution has been obtained by using functions.

What is a function?

A function is described as a relationship between a group of inputs with one output each. A function is, to put it simply, a relationship between inputs in which each input is connected to exactly one output. Every function has a domain and a codomain, or range. A function is typically represented by the notation f(x), where x represents the input. A function is typically shown as y = f(x).

The equation ax + by + c = 0 [1] represents the line in question. A list of pairs of coordinates for each intersection point and the number of intersections (count) should be returned by the function (list).

A list of items can be sent to the function count list, which will return the total number of objects in the list. The function returns the number of objects in the specified list after accepting an array or list of objects.

Hence, the equation that determines the intersection of line with a clipping triangle is ax + by + c = 0 [1].

Learn more about function from the given link

https://brainly.com/question/11624077

#SPJ4

Answer:

Step-by-step explanation:

You want the area of the composite figure consisting of a rectangle and a triangle.

The area of the rectangle is ...

  A = LW

  A = (5 ft)(6 ft) = 30 ft² . . . . rectangle area

The base of the triangle is the difference in length of the horizontal segments:

  b = 9 ft -5 ft = 4 ft

The area is given by the formula ...

  A = 1/2bh

  A = 1/2(4 ft)(6 ft) = 12 ft² . . . . triangle area

The area of the figure is the sum of the areas of its parts:

  total area = rectangle area + triangle area

  total area = 30 ft² +12 ft²

  total area = 42 ft²

__

Additional comment

The area of this trapezoid can also be found using the trapezoid formula:

  A = 1/2(b1 +b2)h

  A = 1/2(9 ft +5 ft)(6 ft) = 42 ft²

The rectangle is shown in the figure as 5 ft wide and 6 ft tall. It does not matter which of these dimensions you call the length and which you call the width. Their product is the same either way.

Units are a natural number, a natural number that are negative, or zero. The number zero and any number generated by adding one to it repeatedly. A single integer or the product of two integers (division by zero excluded).

What exactly are integers?

In mathematics, integers are the collection of positive and negative numbers. Integers, like whole numbers, do not include the fractional element. Thus, integers are numbers that can be positive, negative, or zero, but not fractions. On integers, we can do all arithmetic operations such as addition, subtraction, multiplication, and division. Integers include numbers such as 1, 2, 5, 8, -9, -12, and so on. "Z" is the symbol for integers.

The number zero and any number generated by adding one to it repeatedly. A single integer or the product of two integers (division by zero excluded).A natural number, a negative of a natural number, or zero is a unit of an abstract mathematical system according to the principles of arithmetic. 

e.g. 1,2,0, 0+1, 0+2+3, 8, 8/2=4, -8/2=-4 etc. all are units of  an abstract mathematical system subject to the laws of arithmetic.

To know more about integers visit the link

https://brainly.com/question/15276410?referrer=searchResults

#SPJ4

Answer: (-1.25, 0.41)

Step-by-step explanation:

The slope of the least-squares regression line is not directly related to the fraction of the variation in the response variable that is explained by the explanatory variable.

The slope of the least-squares regression line is a numerical measure of the rate of change in the response variable for a unit change in the explanatory variable. It does not directly relate to the fraction of the variation in the response variable that is explained by the explanatory variable. This is because the fraction of the variation in the response variable that is explained is determined by the correlation coefficient, which is a measure of how well the regression line fits the data. The slope of the least-squares regression line is unitless, meaning it does not have any specific unit such as meters, seconds, or degrees. The slope of the least-squares regression line is simply a numerical measure of the rate of change in the response variable per unit change in the explanatory variable. This is different from the fraction of the variation in the response variable explained by the explanatory variable, which is determined by the correlation coefficient.

Learn more about variable here

brainly.com/question/29583350

#SPJ4

The column vectors of this matrix are linearly independent, meaning they are not dependent upon one another, and the determinant is not equal to 0.

The given matrix is:

| 1 0 5 |

| -2 1 -6 |

| 0 2 8 |

We must compute the matrix's determinant in order to determine if the matrix's column vectors are linearly independent or linearly dependent.

A scalar value that can be used to assess linear dependency or independence is the determinant of a matrix.

The determinant of the matrix is:

det(A) = 1(-68) - 0(18) + 5(-2*2) = -6 + 0 - 20 = -26

Since The column vectors of this matrix are linearly independent, meaning they are not dependent upon one another, and the determinant is not equal to 0.

To learn more about  matrix, visit the link below:

https://brainly.com/question/28180105

#SPJ4

Answer:

33.33%

Step-by-step explanation:

amount of sugar at first 6x

now 4x

difference 2x,(6x-4x)

"ratio=2/6"

change in percentage:2/6×100%=33.33%