Answer:
The use of pomace for animal feed might be chosen if minimizing production costs is desired
Explanation:
i've taken the test
The use of pomace for animal feed might be chosen if minimizing production costs is desired. Therefore, the correct option is option D.
What is pomace?The solid byproduct of pressing grapes, olives, or even other fruits for juice or oil is known as pomace or marc. It includes the fruit's skins, pulp, seeds, or stems. Pomace brandy has traditionally been made from grape pomace. Currently, it is primarily used as fertilizer, animal feed, or to extract bioactive substances like polyphenols.
The Latin word "pomum" is where "pommace" comes from. The phrase "pomace" was first used by the English to describe the byproduct of making cider. Pomace wine, which had an alcohol concentration of three to four percent, was very common during the Middle Ages. The use of pomace for animal feed might be chosen if minimizing production costs is desired.
Therefore, the correct option is option D.
To know more about pomace, here:
https://brainly.com/question/26976856
#SPJ2
• Calculate the entropy change when 1.00 mol of
water at 0°C freezes to form ice. (AHfus for water
is +6.02 kJmoll)
1
Answer:
the enthalpy change of this is 5.02mol
When Thomas Edison first sold electricity, he used zinc coulometers to measure charge consumption. (In a coulometer the cathode is weighed before a current is passed through it, and then again after the passage of current. The weight increase is proportional to the amount of current that flows through the cathode.) If the zinc plate in one of Edison's coulometers increased in mass by 7.85 g, how much charge had passed through it
When the zinc plate in one of Edison's coulometers increased in mass by 7.85 g, the amount of charge that had passed through it is 23,173 C.
Ionization of zinc
The zinc metal will ionize as shown below;
Zn²₊ + 2e⁻ → Zn
The molar mass of zinc metal is given as 65.38 g/mol
Amount of charge passed through 65.38 g/molAmount of charge that will deposite the given mass of zinc is calculated as follows;
e⁻ = 96500 C
2e⁻ = 2 x 96500 C = 193,000 C
Amount of charge passed through 7.85 g65.38 g -------> 193,000 C
7.85 g -----------> ?
= (7.85 x 193,000)/(65.38)
= 23,173 C
Thus, when the zinc plate in one of Edison's coulometers increased in mass by 7.85 g, the amount of charge that had passed through it is 23,173 C.
Learn more about electrolysis here:https://brainly.com/question/25712870
write an equation to show the effect of heat on the nitrate of silver
Answer:
2AgNO³(l) → 2Ag(s) + O²(g) + 2NO²(g)
Explanation:
I used powers ³,²,²
So change them to be down
When 20.4g of sodium metal are mixed with chlorine gas, are 52.0 g of sodium chloride
produced? Explain (use calculations to prove your answer.
.ves or no
-with amounts shown)
Answer: True
Explanation:
[tex]\mathrm{The\ balanced \ chemical \ equation\ is\ :}\\$2 \mathrm{Na}{(s)}+\mathrm{Cl}_{2}(g) \rightarrow 2 \mathrm{NaCl}(s)[/tex]
For Na
[tex]\\$Given mass $=20.4 \mathrm{~g}$ \ \ Molecular mass $=23 \mathrm{~g}\ \ $Number of moles $=\frac{\text { Given mass }}{\text { Molecular mass }}$$$\begin{aligned}&=\frac{20.4}{23} \\&=0.887 \text { moles }\end{aligned}$$Stoichiometric ratio of $\mathrm{Na}$ is same as that of $\mathrm{NaCl}$ i.e., $1: 1$.$\therefore$ Moles of $\mathrm{NaCl}=0.887$ motes[/tex]
For NaCl
[tex]$$\\\begin{aligned}\text { Molecular mass } &=23+35.5 \\&=58.5 \mathrm{~g}\end{aligned}$$[/tex]
[tex]\begin{aligned}\\& $\therefore$ Mass of $\mathrm{NaCl}$ produced will be=\text { No.of moles } \times \text { Molecular mass } \\&=0.887 \times 58.5 \\&=51.9 \\&\simeq 52 \mathrm{~g} \quad\end{aligned}$$[/tex]
Therefore, it is true that when 20.4g of sodium metal are mixed with chlorine gas, 52.0 g of sodium chloride is produced
Explanation:
The answer: True
I explained the answer to your question in the submitted photo
Which one of these are a physical property? Select all that apply. a. Luster (shininess) Conducts Electricity Reactivity with water d. Temperature b. 0 0
I would really appreciate someone could answer this question for mee! I will mark brainliest aswell. :)
Which statement is true about the total mass of the reactants during a chemical change?
A)It is destroyed during chemical reaction
B)It is less than the total mass of the products.
C)It is equal to the total mass of the products.
D)It is greater than the total mass of the products.
Answer:
c
Explanation:
mass is like matter it cant be created or destroyed so mass stays the same.
Answer:
C) It is equal to the total mass of the products.
Explanation:
The law of conservation of mass states that in a chemical reaction, the total mass of reactants is equal to the total mass of products.
- profparis
Indicate the electron pair geometry and the molecular geometry for each of the six compounds.
Compound Electron pair geometry Molecular geometry
BeCl
2
linear
linear
SO
3
trigonal planar
trigonal planar
SO
2
trigonal planar
bent
SiCl
4
PF
3
SCl
2
What is the thermodynamics equation?
please help. 15 points. will give brainliest.
Answer:
ΔU = Q − W
Explanation:
the branch of physical science that deals with the relations between heat and other forms of energy (such as mechanical, electrical, or chemical energy), and, by extension, of the relationships between all forms of energy.
ΔU is the change in internal energy U of the system. Q is the net heat transferred into the system—that is, Q is the sum of all heat transfer into and out of the system.
The density of chlorine gas at 0.970 atm and 29.8 °C is ________ g/L.
Answer:
d=3.95 g/l
Explanation:
1) Ideal gas equation:
pV = nRT
2) Transform the equation to compute density, d = m / V
n = mass in grams / molar mass = m / MM
pV = (m/MM) RT
=> pV = mRT/MM
=> m/V = pMM / (RT)
d = pMM / (RT)
p = 1.21 atm
MM = 83.80 g/mol (this is the atomic mass of krypton element)
T = 50 + 273.15 K = 323.15K
3) Compute:
d = (1.25 atm * 83.80 g/mol) / (0.0821 atm*liter /K*mol * 323.15K)
How much 1.75 M H3PO4, in mL, would you need to add to 50.00 mL of 3.50 M Ca(OH)2 in order to neutralize the solution
The volume of the 1.75 M H₃PO₄ solution required to neutralize 50 ml of 3.5 M Ca(OH)₂ solution is 66.67 mL
Balanced equation2H₃PO₄ + 3Ca(OH)₂ —> Ca₃(PO₄)₂ + 6H₂O
From the balanced equation above,
The mole ratio of the acid, H₃PO₄ (nA) = 2The mole ratio of the base, Ca(OH)₂ (nB) = 3How to determine the volume of H₃PO₄ Molarity of acid, H₃PO₄ (Ma) = 1.75 MVolume of base, Ca(OH)₂ (Vb) = 50 mLMolarity of base, Ca(OH)₂ (Mb) = 3.5 MVolume of acid, H₃PO₄ (Va) =?MaVa / MbVb = nA / nB
(1.75 × Va) / (3.5 × 50) = 2/3
(1.75 × Va) / 175= 2/3
Cross multiply
1.75 × 3 × Va = 175 × 2
5.25 × Va = 350
Divide both side by 5.25
Va = 350 / 5.25
Va = 66.67 mL
Thus, the volume of the H₃PO₄ solution needed is 66.67 mL
Learn more about titration:
https://brainly.com/question/14356286
A 5.00 L flask at 25˚ C contains 0.200 mol of Cl2 . What is the pressure in the flask?
Answer:
Your answer would be:
0.98atm.
Explanation:
The pressure of a gas can be calculated by using the following expression:
PV = nRT
P = pressure
V = volume
-----------------------------------
n = number of moles
R = gas law constant
T = temperature
P × 5 = 0.2 × 0.0821 × 298
5P = 4.893
P = 4.893 ÷ 5 = 0.98atm
P = 0.98atm
In conclusion, the pressure of a 5.00 L flask at 25 degrees C. that contains 0.200 mol of Cl2 is 0.98atm.
Have a great rest of your day
#TheWizzer
Answer:
Hello, senzawahl SORRY IF I SPELLED YOUR NAME INCORRECT
Prime here ready to solve your question :)
so your correct answer is 0.98atm.
Explanation:
Stay safe
-prime
A 25 L tank of oxygen under a pressure of.80 atm would require what pressure to
decrease the volume to 1.0 L?
Answer:
20 atm
Explanation:
Use the equation P1 x V1 = P2 x V2.
1) Rearrange the equation with algebra to solve for P2.
P2 = (P1 x V1)/ V2
2) Plug in to the equation where V1 = 25L, P1 = 0.80 atm, and, V2 = 1 L
P2 = (25L x 0.80 atm)/ 1L
3) Solve: P2 = 20 atm
The pressure required to reduce the oxygen's volume to 1 L would be 20 atm.
A buffer was prepared containing 0.50 M formic acid (HCOOH) and 0.50 M sodium formate (NaCOOH). The Ka of formic acid is 1.7 x 10-4. What will be the pH after 0.010 mol of NaOH(s) is added to 100.0 mL of the buffer
For a buffer that was prepared contain 0.50 M formic acid (HCOOH) and 0.50 M sodium formate (NaCOOH). the pH is mathematically given as
pH=3.95
What is the pH after 0.010 mol of NaOH(s) is added to 100.0 mL of the buffer?Generally, the equation for the Hendersons equation is mathematically given as
pH=pKa+log(SALT)/(ACID)
Where
moles of (NaCOOH)=100*0.05/1000
moles of (NaCOOH)=0.05moles
and formic acid
moles of formic acid=100*0.05/1000
moles of formic acid=0.05moles
Therefore
pKa=-logka
pKa=1.4*10*3.77
pH=3.77+log{0.06/0.04}
pH=3.95
In conclusion, the pH is
pH=3.95
Read more about pH
https://brainly.com/question/1503669
Calculate the pOH for a solution with a hydroxide ion, (OH-) of concentration of 6.49 X 10-11 M.
Calculate the pH.
Note: the answers should have three significant figures
The pOH is: Blank 1
The pH is: Blank 2
Answer:
Calculate the pOH for a solution with a hydroxide ion, (OH-) of concentration of 6.49 X 10-11 M.
Calculate the pH.
Note: the answers should have three significant figures
The pOH is: Blank 1
The pH is: Blank 2
Explanation:
Determine which reaction has the highest activation energy.
A. Burning charcoal
B. Melting ice
C. Combusting gasoline
D. Reacting metal and acid
Answer:
A.
Explanation:
What is the isotope notation of selenium
Answer:
It is Se.
hope this helps.
A galvanic (voltaic) cell consists of an inert platinum electrode in a solution containing 1.0 M tin(IV) ion and 1.0 M tin(II) ion, and another inert platinum electrode in a solution containing 1.0 M cobalt(III) ion and 1.0 M cobalt(II) ion, connected by a salt bridge. Calculate the standard potential for this cell at 25°C. Standard reduction potentials can be found in the standard reduction potentials table.
In the galvanic or voltaic cell, the standard cell potential is 1.67 V. The standard potential is the difference between the reduction potential of cathode and anode.
What is an electrochemical cell?An electrochemical cell produces energy by a sponteanous chemical process. A galvanic or voltaic cell produces energy by a sponteanous chemical reaction.
Hence, given the standard reduction potentials;
Sn4+ + 2e- ==> Sn2+ Eº = 0.15 V (anode)
Co3+ + 2e- ==> Co2+ Eº = 1.82 V (cathode)
Eºcell = 1.82 V - 0.15 V = 1.67 V
Learn more about electrochemical cell: https://brainly.com/question/12034258
3.50 grams of an unknown metal was placed in a graduate cylinder containing 50.0
mL water initially. What is the density of this unknown metal if the final reading from
the graduate cylinder was 65.0 mL?
For 3.50 grams of an unknown metal was placed in a graduate cylinder containing 50.0mL water initially, the density of this unknown meta is mathematically given as
D= 0.23 g/ml
What is the density of this unknown metal if the final reading from the graduate cylinder was 65.0 mL?Generally, the equation for the Volume of water is mathematically given as
Vw= Volume of water after metal addition - Volume of water initial
Therefore
Vw = 65 ml - 50 ml
Vw= 15 ml
In conclusion,
D= Mass of metal / Volume
D= 3.5 / 15
D= 0.23 g/ml
Read more about mass
https://brainly.com/question/15959704
Suppose you are provided with a 35.83 g sample of potassium chlorate to perform this experiment. What is the mass of potassium chloride you expect to release upon heating?
For a 35.83 g sample of potassium chlorate, the mass of potassium chloride is mathematically given as
M Kcl=21.62g
What is the mass of potassium chloride you expect to release upon heating?Generally, the equation for the Chemical Reaction is mathematically given as
2KClO_3----->2KCl+2O_2
Therefore
[tex]Mole of KCl=\frac{35.57}{122.55}[/tex]
Mole of KCl=0.29mol
Mass of Kcl=0.29*74.55
Mass of Kcl=21.62g
In conclusion, Mass of Kcl
M Kcl=21.62g
Read more about Chemical Reaction
https://brainly.com/question/11231920
give the structure of chlorocyclohexane.
don't spam :)
thankyou ~
Answer:
Explanation:
This is not my photo. I got it from this website.
https://pubchem.ncbi.nlm.nih.gov/compound/Chlorocyclohexane#section=2D-Structure
What is the first principle energy level called
Answer:
S orbital
Explanation:
no explanation, just a name you memorize
Ozone has a molecular formula of O3. If 7.92*1024 atoms of oxygen react to form ozone, how many
moles of ozone would be produced?
337.92 moles of Ozone will be produced
1 Oxygen atom is 8 g
1 mole of ozone, O3 = 8 * 3 = 24 g
7.92 * 1024 = 8110.08 g
1 mole = 24 g
? moles = 8110.08 g
? = 337.92 moles
Read more on moles here:
https://brainly.com/question/15356425
Hope it helps
Ozone has a molecular formula of O3. If 7.92*1024 atoms of oxygen react to form ozone, then 337.92 moles of ozone will produce.
What is molecular formula?Molecular formula is defined as an expression that defines a number of atoms of each element in one molecule of a compound.
It can also be defined as a chemical formula that gives the total number of atoms of each elements in each molecules of a substance.
Ozone is defined as a highly reactive gas composed of three oxygen atoms and form a layer above the earth surface called as ozone layer.
1 oxygen atom = 8 g
1 mole of ozone = 8 x 3 = 24 g
7.92 x 10²⁴ = 8110.08 g
24 g = 1 mole
So, 8110.08 g = 337.92 moles
Thus, Ozone has a molecular formula of O3. If 7.92*1024 atoms of oxygen react to form ozone, then 337.92 moles of ozone will produce.
To learn more about molecular formula, refer to the link below:
https://brainly.com/question/28647690
#SPJ2
A chemist adds 36.0 g of sodium chloride to 200 g of water at STP and all of the sodium chloride dissolves. What is the solute in this scenario?
Answer:
The answer is the Sodium Chloride.
Explanation:
A solute is the minor component in a solution, dissolved in the solvent, and the sodium is being dissolved in water ( or the solvent).
A chemist adds 36.0 g of sodium chloride to 200 g of water at STP and all of the sodium chloride dissolves, in this scenario sodium chloride is solute.
What are solute?Those substance which are present in the solution relatively in less amount is known as solute.
In the question given that 36 grams of sodium chloride is added in the 200 grams of water. From this it is clear that sodium chloride is a solute and water is a solvent, which additionally makes a solution.
Hence, sodium chloride is a solute.
To know more about solute, visit the below link:
https://brainly.com/question/16757650
According to Bohr's Model, which one is correct about a transition from n=2 to n=1 in a hydrogen atom?
When an electron moves from n = 2 to n = 1, it emits a photon of ultraviolet light.
What happen in transition from n= to n=1?During transition from n=2 to n=1 in a hydrogen atom, the electron emits energy in the form of photon. We know that when electron absorb energy, it moves from lower level to higher level and vice versa.
So we can conclude that when an electron moves from n = 2 to n = 1, it emits a photon of ultraviolet light.
Learn more about transition here: https://brainly.com/question/1101400
2. The gas from an erupting volcano had the following composition: 494 torr CO₂, 0.054 atm HCI, 0.028 atm HF, 0.017 atm 50₂. 0.76 mmHg H₂5, and H₂. If the total pressure is 1.00 atm, what is the partial pressure of H₂?
3. When a 10L balloon is heated from 22.0°C to 97.0°C, to what volume does it inflate?
4. Calculate the pressure of a gas in a 205 mL container at 0.0°C when the container was initially at a volume of 300.0 mL and a pressure of 1.05 atm
Answer: The gas from an erupting volcano had the following composition: 494 torr CO₂, 0.054 atm HCI, 0.028 atm HF, 0.017 atm 50₂. 0.76 mmHg H₂5, and H₂. If the total pressure is 1.00 atm, what is the partial pressure of H₂?
Explanation:
The ________________and ______________ of magma cause igneous rocks to form.
A: melting and cooling
B: cementation and compaction
C: weathering and erosion
D: heat and pressure
Answer:
option B
cementation and compaction
How much heat is required to raise the temperature of 1,500 g of water from 25°C to 52°C? The specific heat of water is 4.184 J/g-oC.
Apply thermodynamics
[tex]\\ \rm\rightarrowtail Q=mc\delta T[/tex]
Q is heat[tex]\\ \rm\rightarrowtail Q=1500(4.184)(27)[/tex]
[tex]\\ \rm\rightarrowtail Q=169452J[/tex]
How do human population growth trends differ between developed nations and developing nations?
Answer:
Growing population
The worlds developing regions will see 1.2 billion people added, a 20.7% increase; while the population of developed countries will increase a mere 3.3% adding 41 million to the current 1.3 billion people.
Referring to your benzene model, explain why there is no directionality for a substituent group bonded directly to a benzene ring.
The benzene molecule is flat and planar. As a result of this planarity, the substituent is also in the plane of molecule and do not show any directionality.
What is the benzene moleculeThe benzene molecule is a flat and planar molecule owing to the fact that all the bond lengths and bond angles in the molecules are the same. This results from resonance in the molecule.
Hence, owing to the planarity of the molecule, the substituent is also in the plane of molecule and do not show any directionality.
Learn more about benzene: https://brainly.com/question/7284916
How many grams of Na2S will be produced if you react 35.0g sodium