Crane takes 2. 0 minutes to lift a load to the top of a building. The change in gravitati potential energy of the load is 720 kj. What is the useful power output of the crane?.

All three objects will have the same velocity at the lowest point if they start at the same height and move down the same vertical distance. The velocity depends only on the height and the acceleration due to gravity, and not on the path taken to reach the lowest point.

For the object that slides down a frictionless inclined plane, the potential energy at the top is converted into both kinetic energy and gravitational potential energy at the bottom,

mgh = 1/2mv^2 + mgh'

where h' is the height of the inclined plane.

For the object that falls straight down:

v = sqrt(2gh)

For the object that slides down the inclined plane,

v = sqrt(2gh - 2gh')

For the object that swings on the end of a string:

v = sqrt(2gh - 2gh')

To know more about the gravity, here

brainly.com/question/21454806

#SPJ4

The change in momentum is 594 m/s.

An object's momentum is a vector quantity equal to the product of its mass and velocity. A body can only gain momentum when another force exerts pressure on it.

When a net force is applied to an object, the force changes the object's momentum while it is being applied. In other words, the short-term force applied to the body controls the pace at which momentum changes.

When an item suffers a significant change in momentum in a short amount of time, a significant net force must have been exerted on it. This serves as the foundation for the idea of a body's momentum changing.

Therefore, The change in momentum is 594 m/s.

To learn more about Momentum, refer to the link;

https://brainly.com/question/24030570

#SPJ9

The equation for pendulum motion is T = 2π√(l/g), where T represents the period of oscillation, l represents the length of the pendulum, and g represents the acceleration due to gravity.

A pendulum is a simple device consisting of a mass (known as the bob) suspended from a fixed point by a string or rod. When the bob is displaced from its resting position, it swings back and forth in a repetitive motion known as oscillation.

The period of oscillation (T) of a pendulum depends on its length (l) and the acceleration due to gravity (g). The longer the pendulum, the longer the period, and the greater the acceleration due to gravity, the shorter the period.

To know more about the pendulum, here

brainly.com/question/14759840

#SPJ4

The law of conservation of energy and Newton's laws are proved

First Law : Unless a force acts upon a body, it stays at rest or in continual straight-line motion.

Second Law : The rate of change of motion of an object is proportional to the force applied and the object will move in the direction of the straight line in which the force is applied.

Third Law : When two bodies exert force on one another, the direction and amount of the force are opposed.

Given data ,

The law of conservation of energy states that it can neither be created nor be destroyed.

Energy, which is observable in the execution of labor as well as in the form of heat and light, is the quantitative quality that is transmitted to a body or to a physical system in physics. Energy is a preserved resource; according to the rule of conservation of energy, energy can only be transformed from one form to another and cannot be generated or destroyed.

Newton's laws of motion are

First Law : Unless a force acts upon a body, it stays at rest or in continual straight-line motion.

Second Law : The rate of change of motion of an object is proportional to the force applied and the object will move in the direction of the straight line in which the force is applied.

Third Law : When two bodies exert force on one another, the direction and amount of the force are opposed.

Hence , the newton's laws are proved

To learn more about newton's laws click :

https://brainly.com/question/27573481

#SPJ1

The energy of the transition with a wavelength of 434 nm is

6.25 x 10^-20 kJ/mol.

The energy of a transition in the hydrogen atom can be calculated using the equation:

E = hc/λ

where h is Planck's constant (6.626 x 10^-34 J s),

c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the transition.

Plugging in the values, we have:

E = (6.626 x 10^-34 J s) * (2.998 x 10^8 m/s) / (434 x 10^-9 m)

E = 3.75 x 10^-19 J

To convert the energy to kJ/mol, we need to divide by Avogadro's constant (6.022 x 10^23):

E = (3.75 x 10^-19 J) / (6.022 x 10^23)

E = 6.25 x 10^-23 J/mol

E = 6.25 x 10^-23 * (1000 J/1 kJ)

= 6.25 x 10^-20 kJ/mol

To learn more about  Energy of transition :

https://brainly.com/question/18156550

#SPJ4

The wavelength of the wave is 1.6 meters.

How to calculate the wavelength?

The wavelength of a wave can be determined using the formula:

wavelength = velocity/frequency

where the velocity of the wave is 4 m/s and the frequency of the wave is 1/period. To find the frequency, we can use the formula:

frequency = 1 / period

So, for a period of 0.4 s, the frequency would be 1 / 0.4 = 2.5 Hz.

Now that we have the velocity and frequency, we can substitute these values into the formula for wavelength:

wavelength = velocity / frequency = 4 m/s / 2.5 Hz = 1.6 m

So, the wavelength of the wave is 1.6 meters.

To know more about wavelength, Check out:

https://brainly.com/question/1598565

#SPJ4

.

Direction of magnetic field of the conductor is towards left side of the page. Hence option D is correct.

Fleming's left hand rule in magnetism states that, hold the fore finger, middle finger and the thumb of the left hand in a mutually perpendicular position. The forefinger represents the direction of the magnetic field, middle finger represents the direction of the current and the thumb indicates the direction of magnetic force on the conductor.

Here,

The figure of a current carrying wire which is placed in a uniform magnetic field is given.

From the figure,

The direction of force and that of current of the conductor are given.

So,

The direction of force is given by the arrow pointing upwards to the page.

The direction of current is represented by the cross sign. The cross sign indicates that it is perpendicularly inwards to the plane of the page.

It is clear that the force and the  current are in a mutually perpendicular direction in the figure.

Applying Fleming's Left Hand Rule,

Holding the fingers such that the thumb pointing upwards of the page and middle finger towards inside of the page. So now the forefinger is directed towards left side of the page.

Therefore, the direction of magnetic field is towards the left of the page.

Hence,

Direction of magnetic field of the conductor is towards left side of the page.

To learn more about Fleming's left hand rule, click:

https://brainly.com/question/20347569

#SPJ1

The nosepiece of the microscope carries three or four objective lenses.

The component of a microscope that houses the objective lenses is called a turret or rotating nosepiece (can be two or many). The rotation of the objective lenses and assistance in adjusting the magnification power is the crucial function of the nosepiece.

To know more about nosepiece in a microscope, visit:

brainly.com/question/13779815

#SPJ4

Answer:

Alternating Current is the current that reverses its direction at regular intervals.

Period being a time, is measured in the units of time. The SI unit of time is seconds. Hence usually the period is measured in the nit of seconds.

The International System of Units (SI) is the modern form of the metric system, which is the most widely used system of measurement in the world. It is a standardized system of measurement that is based on seven fundamental units, each of which is defined in terms of a fundamental constant of nature. The seven fundamental SI units are the meter (length), kilogram (mass), second (time), ampere (electric current), kelvin (temperature), mole (amount of substance), and candela (luminous intensity).  

These units are used as building blocks to derive other units of measurement. In addition to the seven fundamental units, the SI system also includes several derived units, such as the newton (force), watt (power), and volt (electric potential), which are derived from combinations of the fundamental units.

To learn more about SI unit visit here:

brainly.com/question/12750330  

#SPJ4

The wavelength in nanometers of light is 789 nm. The result is obtained by dividing the speed of light by the frequency.

Wavelength is the distance between the two successive crests or troughs of a wave. The wavelength of a light can be expressed as

λ = c/f

Where

The scientific data shows that the speed of light is 3 × 10⁸ m/s.

So, we get the wavelength by the formula above.

λ = c/f

λ = 3 × 10⁸/3.80 × 10¹⁴

λ = 0.789 × 10⁸⁻¹⁴

λ = 0.789 × 10⁻⁶ m

In nanometers (10⁻⁹), the wavelength is

λ = 789 × 10⁻³ × 10⁻⁶ m

λ = 789 × 10⁻⁹ m

λ = 789 nm

Hence, the wavelength of the light is 789 nanometers.

Learn more about wavelength of a light here:

brainly.com/question/10518678

#SPJ4

The magnitude of the electric field created by sphere A will be greater than that of sphere B, since sphere A is a good conductor. The electric field created by a conductor at a given distance is inversely proportional.

 Electric is a form of energy that is produced by the movement of charged particles, such as electrons, through an electric field. Electric energy is used to power a variety of everyday items such as lights, phones, computers, and even electric vehicles. Electric energy can be generated in a variety of ways, including through the burning of fossil fuels, the harnessing of electric or wind energy, or the use of nuclear power plants. Electric energy is also used to power many of the devices and appliances used in our homes and businesses, and is an essential part of modern life.

To learn more about electric

https://brainly.com/question/1100341

#SPJ4

We call a molecule that binds up excess hydrogen ions in a solution a "buffer."

To know more about buffer , check out :

https://brainly.com/question/22390063

#SPJ4

Braking with ABS, the proper technique are press and hold the brake pedal firmly, allow the ABS to do its job, steer the vehicle, and keep a safe following distance.

When braking with ABS (Anti-lock Braking System), the proper technique is as follows:

1. Press and hold the brake pedal firmly: Keep your foot firmly pressed down on the brake pedal without releasing it.

2. Allow the ABS to do its job: Let the ABS system do its job of pulsing the brakes to prevent the wheels from locking up. You may feel pulsations or vibrations in the brake pedal, but this is normal and indicates that the ABS is working properly. Don't pump the brake pedal, as this can interfere with the ABS system and reduce its effectiveness.

3. Steer the vehicle: Keep the steering wheel steady and avoid any sudden or aggressive movements while braking with ABS. The ABS system helps to maintain steering control by preventing the wheels from locking up, but you still need to steer the vehicle in the desired direction.

4. Keep a safe following distance: Maintain a safe following distance from the vehicle in front of you, especially in slippery or wet road conditions. ABS can help you to slow down safely, but it cannot increase the traction between your tires and the road. So, it's important to adjust your speed and following distance according to the road conditions and traffic around you.

By following these techniques, you can help to ensure maximum safety when braking with ABS. Remember, ABS is a valuable safety feature, but it's not a substitute for safe and responsible driving practices.

To know more about ABS please refer: https://brainly.com/question/30723642

#SPJ4

The weight of an object with a mass of 20 kilograms on a planet is 196N

The weight of an object can be calculated as the product of its mass and the acceleration due to gravity. On a planet with an acceleration of gravity of 9.8 m/s^2, the weight of an object with a mass of 20 kilograms can be calculated as follows:

Weight (W) = Mass (m) * Acceleration of gravity (g)

W = 20 kg * 9.8 m/s^2

W= 196 N

So, the weight of an object with a mass of 20 kilograms on a planet that has an acceleration of gravity of 9.8 m/s^2 is 196 N.

To learn more about Weight :

https://brainly.com/question/14375094

#SPJ4

The true statements are (a) The skateboarder is moving in the direction of the net force. and (c) The acceleration of the skateboarder is in the same direction as the net force.

a) The skateboarder is moving in the direction of the net force. correct in some cases; This depends on the direction of the net force relative to the direction of the skateboarder's initial velocity. If the net force acts in the same direction as the initial velocity, the velocity increases, and if the net force acts in the opposite direction, the velocity decreases.

(b) The acceleration of the skateboarder is at right angles to the net force. never true; By definition, acceleration is the rate of change of velocity. If the net force is non-zero, the velocity changes and the acceleration is always in the direction of the net force instead of perpendicular to it.

(c) The acceleration of the skateboarder is in the same direction as the net force always true; An object's acceleration is directly proportional to the net force acting on it and inversely proportional to its mass. If the net force is non-zero, the acceleration is always in the same direction as the net force.

(d) The skateboarder is instantaneously at rest.never true; If the net force is non-zero, the speed has changed and the skateboarder is not resting. If the skateboarder is not standing, they should accelerate in the direction of the net force.  

know more about acceleration click here;

https://brainly.com/question/30614747

#SPJ4

Ocean waves are considered a renewable resource.

Renewable resources are natural resources that can be replenished in a relatively short period of time. Unlike nonrenewable resources, such as fossil fuels, renewable resources are not depleted when used and can be replenished naturally. Ocean waves are generated by the wind and can be used to generate energy through wave energy converters, which convert the energy from the ocean waves into electricity. The use of ocean waves for energy generation is considered a renewable energy source because the wind that generates the waves is an endless resource.

Ocean waves are created by the wind blowing over the surface of the ocean, causing the water to move in a repeating pattern known as wave motion. The energy from the wind is transferred to the water, causing it to move up and down in a wave pattern. Ocean waves can vary in size and frequency, with larger waves having more energy and a greater potential for energy generation.

To know more about Renewable resources, visit:

brainly.com/question/545618

#SPJ4

Determine the visible light's wavelength at a frequency of health care - associated x 10 14 Hz. Answer: Given that light has a frequency of 6.24 x 10 14 Khz. We are aware that the speed of light is 3 x 10.

What is a wave's wavelength?

A description of the wave in space that is systematically equivalent to its frequency and governed by the physics of the phenomenon is the wavelength (also known as the wavenumber or wave vector). The lowest traveling wave solutions are sinusoids, and superposition can be used to create more complicated ones.

What distinguishes a wavelength from a comparable point?

Submitted by: Distance between the equivalent positions of two successive waves is known as the wavelength. Two things or particles that are in the same step., points that have performed identical fractions in their periodic motion—are referred to as "corresponding points."

To know more about wavelength  visit:

https://brainly.com/question/29398067

#SPJ4

The diameter (or aperture) of an optical telescope's objective—the main lens or mirror that gathers and concentrates light—determines its capacity to resolve fine details, while the area of the objective determines its capacity to gather light.

A telescope's resolving power can be determined using the following formula: Resolving power is calculated as 11.25 seconds of arc/d, where d is the centimeter-based diameter of the objective.

The shortest angle at which two near objects may be clearly distinguished as separate is the telescope's angular resolving power (also known as resolution). Due to the wave nature of, resolution is reduced.

To know more about telescope influences visit:

https://brainly.com/question/30630977

#SPJ4

To convert grams to moles, you need to divide the mass of the substance in grams by its molar mass, which is the mass of one mole of the substance.

The molar mass of a substance is calculated by adding up the atomic masses of all the atoms in its chemical formula.

The formula for converting grams to moles is:

moles = grams / molar mass

The molar mass of a substance is calculated by adding up the atomic masses of all the atoms in a molecule. The atomic masses are found on the periodic table of elements.

For example, the molar mass of water (H2O) is calculated as follows:

2 x the atomic mass of hydrogen (1.008) + 1 x the atomic mass of oxygen (15.999) = 18.015 g/mol

Molar mass is important in chemistry because it allows for the conversion of mass to moles and vice versa. This is useful in determining the amount of a substance needed for a chemical reaction, as well as calculating the concentration of a solution. Additionally, the molar mass can be used to determine the empirical and molecular formulas of a substance.

To learn more about Molar mass visit here:

brainly.com/question/22997914

#SPJ4

Answer:

neutrons because have to he stable fromation mc

The skateboarder touches down 3.8 meters from the end of the ramp while wheels roll out without friction.

Friction is the force that opposes motion between two surfaces that are in contact with each other. It arises because the microscopic roughness of the surfaces that are in contact, and the interlocking of their asperities causes a resistance to sliding or rolling motion.

Friction can be categorized into two types:

For example, it allows us to walk, run, and grip objects. However, friction can also cause problems, such as wearing down machinery and causing heat build-up.

Conservation of energy to be used to solve this problem.

At the top of the ramp, all the skateboarder's initial energy is in the form of kinetic energy, and at the bottom, all the energy is in the form of potential energy. Therefore:

[tex]1/2 * m * v^2 = m * g * h[/tex]

where m is the mass of the skateboarder, v is the initial velocity, g is the acceleration due to gravity[tex](9.81 m/s^2)[/tex], and h is the height of the ramp.

Solve this equation for the mass of the skateboarder:

[tex]m = (2 * h) / (g * sin^2(theta))[/tex]

where theta is the angle of the ramp (30 degrees).

Plugging in the given values,

[tex]m = (2 * 1.0 m) / (9.81 m/s^2 * sin^2(30 degrees)) = 2.2 kg[/tex]

Now that the mass of the skateboarder is known, use the kinematic equations to find the distance the skateboarder travels before touching down:

[tex]d = v^2 * sin(2*theta) / g[/tex]

Plugging in the given values

[tex]d = 7.0 m/s * sin(2 * 30 degrees) / (9.81 m/s^2) = 3.8 m[/tex]

Therefore, the skateboarder touches down 3.8 meters from the end of the ramp.

To know more about Friction, visit:

https://brainly.com/question/24338873

#SPJ4

A 4.0-L balloon at 300 K is placed in a cooler at 245 K; the volume of the balloon after it has been in the cooler is 3.27 L, and the formulas are PV = nRT, which is an ideal gas law formula, and then by using V1/T1 = V2/T2, the answer is derived.

PV = nRT

(P = pressure, V = volume, n = number of moles of gas, R = ideal gas constant, T = temperature)

Suppose, the number of moles and pressure remain constant,

V1/T1 = V2/T2

(V1 = initial volume, T1 = initial temperature, V2 = final volume, T2 = final temperature)

After putting values,

V2 = (V1 x T2) / T1

V2 = (4.0 L x 245 K) / 300 K

V2 = 3.27 L

Hence, the volume of the balloon after it has been in the cooler is 3.27 L, and the formulas are PV = nRT, which is an ideal gas law formula.

Learn more about the calculation for volume here.

https://brainly.com/question/19481730

#SPJ1

The change in momentum during the 3.25s acceleration is 28,280 kg m/s.

The change in momentum of an object is given by the product of its mass and its change in velocity, which can be calculated using the equation:

Δp = m * Δv

Where Δp is the change in momentum, m is the mass of the object, and Δv is the change in velocity.

To find the change in velocity, we can use the equation:

v = v0 + at

Where v is the final velocity, v0 is the initial velocity, a is the acceleration, and t is the time interval.

Since the dragster is initially traveling at 35 km/h = 35 * 1000 / 3600 m/s = 9.72 m/s, we can plug in the values to find the final velocity:

v = 9.72 + (12.5)(3.25) = 45.07 m/s

Δv = v - v0 = 45.07 - 9.72 = 35.35 m/s

Now that we have the change in velocity, we can find the change in momentum:

Δp = m * Δv = 800 kg * 35.35 m/s = 28,280 kg m/s

Learn more about change in momentum, here:

https://brainly.com/question/30157362

#SPJ9

Any condition that affects conduction system of the heart can cause disruptions in the electrical signals and result in erratic movements around the atria, which can lead to an irregular heartbeat.

The conduction system of the heart generates and coordinates the electrical signals that cause the heart muscle to contract, producing a normal heartbeat. Disruptions to this system can cause the electrical signals to move erratically around atria, leading to an irregular heartbeat.

These disruptions can occur due to several factors, including aging, heart disease, medications, electrolyte imbalances, and genetic factors. Any condition that interferes with normal functioning of conduction system can cause arrhythmias, as electrical signals are no longer coordinated and may move in a disorganized manner around the atria.

To know more about the atria, here

brainly.com/question/11504953

#SPJ4

The speed of the waves on the string is 8.6 m/s, and the frequency of the vibrations that create the waves is 1/1.5 Hz (one vibration every 1.5 seconds).

λ = v/f

λ = 8.6 m/s / (1/1.5 Hz) = 8.6 m/s × 1.5 s = 12.9 meters

Therefore, the wavelength of the waves that travel along the string is 12.9 meters.

To know more about waves , check out :

https://brainly.com/question/3148541

#SPJ4

All waves have a wavelength, frequency, speed, and amplitude, and they all share the same fundamental features of reflection, refraction, diffraction, and interference. Thus, option B is correct.

The height (amplitude), frequency, and length of a wave can all be used to characterize it. Any wave can be thought of as an energy-transferring disturbance.

Compared to mechanical waves, electromagnetic waves are different. The electromagnetic waves can move in vacuums since they have the ability, but sound waves and water cannot, so they require a medium to spread.

Electric and magnetic fields oscillate along with electromagnetic waves in a manner that is perpendicular to the direction of propagation.

therefore, Mechanical waves require a medium for propagation.

Learn more about waves here:

https://brainly.com/question/3639648

#SPJ1

To increase drag force, the plane can have many flaps it can lift vertically, which will help it increase the drag on the airplane, which is useful to help the plane decelerate or roll

A drag force is a force acting opposite to the relative motion of any object moving with respect to a surrounding fluid. This can exist between two fluid layers (or surfaces) or between a fluid and a solid surface.

To increase drag force, the plane can have many flaps it can lift vertically, which will help it increase the drag on the airplane, which is useful to help the plane decelerate or roll. However, to decrease drag force, the plane needs to be streamlined, in a tear drop shape, but not so much so as to create too much friction drag.

Learn more about drag force here: https://brainly.com/question/23942493

#SPJ1

I came across a query asking why a perfectly fitting pot's cover frequently sticks after cooking when it cools down. The solution manual responded that pressure drops off as the temperature rises.

The sole factor influencing the pot before it is heated during cooking is the atmospheric pressure and the food within the pot likewise depends on that pressure. Therefore, the pressure inside the pot is currently at its starting state. The pressure inside the pot rises as it becomes warmer. Temperature rises along with pressure when pressure rises. Boiling is not an isothermal process. Therefore, during the boiling process, if a substance's pressure increases, the temperature will likewise change. As a result, pressure and body temperature are directly related.

In third case, when the pan is covered with a heavy lid, the cooking time will be the shortest. The pressure in the pan is higher when lid is heavier. When pressure is high, the saturation temperature at which water begins to boil will also be high. Additionally, faster cooking results from greater boiling temperatures.

To learn more about the fitting pot and pressure inside the pot visit here:

https://brainly.com/question/30624900

#SPJ4

The voltage in each branch of the parallel circuit is 9.0 V.

A parallel circuit is a type of electrical circuit in which the components are arranged in such a way that they are connected to the same voltage source by separate branches.

In a parallel circuit, each component has its own individual path for electric current to flow, and the total current is equal to the sum of the currents flowing through each branch.

In a parallel circuit, the voltage across each component is the same, but the current through each component can be different.

V1 = V2 = V = 9.0 V

where;

Learn more about parallel circuits here: https://brainly.com/question/19929102

#SPJ1