container a holds 777 ml of an ideal gas at 2.50 atm. container b holds 174 ml of a different ideal gas at 4.80 atm. container a and container b are glass spheres connnected by a tube with a stopcock. container a is larger than container b. if the gases are allowed to mix together, what is the resulting pressure?

Approximately 4.08 g of NaN3 is needed to fully inflate a 140 L airbag.

To calculate the amount of NaN3 needed to fully inflate an airbag with a volume of 140 L, we can use the Ideal Gas Law:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant (8.31 J/mol*K), and T is the temperature (assumed to be at room temperature, approximately 298 K).

Given that one mole of gas at room temperature occupies approximately 24 L of volume, we can convert the volume of the airbag to moles:

n = V / 24 L/mol

Solving for n, we get:

n = (P * V) / (R * T)

n = (1 atm * 140 L) / (8.31 J/mol*K * 298 K)

The number of moles of NaN3 needed is approximately 0.0048 mol. To convert this to grams, we multiply by the molar mass of NaN3 (85 g/mol):

m = n * M

m = 0.0048 mol * 85 g/mol

The amount of NaN3 needed to fully inflate the airbag is approximately 4.08 g.

Learn more about airbags:

https://brainly.com/question/29775381

#SPJ4

Answer:

No

Explanation:

Ionic bonding is where an one atom wants to gain e- while the other wants to lose e-

Such as NaCl.

Any chemical compound or biomolecule that makes up the solute has an interface with the solvent known as a solvation shell or sheath. A hydration shell or sphere is what is created when water serves as the solvent. The hydration number of a solute is the sum of the number of solvent molecules surrounding each unit of the solute.

What are ions?

An atom or molecule with a net electrical charge is known as an ion. Conventionally, the charge of an electron is thought to be negative; this charge is equal to and opposite to the charge of a proton, which is thought to be positive.

The negative oxygen atoms of water are drawn to the Na+ ions. The positive hydrogen atoms of water are drawn to the Cl ions. A water-molecule solvation shell forms around the ions.

The stability of the system increases with the distance that the opposing charges can travel. The ions are therefore stabilized by solvation.

To learn more about dissolved ions, click on the below link:

https://brainly.com/question/5384053

#SPJ4

Berkelium oxide (BeO) has a hexagonal close-packed (HCP) crystal structure, similar to the fluorite structure.

The lattice parameter can be calculated using the formula for the HCP structure: a = 4R/√3, where R is the radius of the bekelium ion. The density of BeO can be determined using the formula: density = mass/volume, where the mass can be calculated based on the number of BeO molecules and their atomic masses and the volume can be calculated based on the lattice parameter. The packing factor is the ratio of the volume occupied by the ions to the total volume of the crystal structure and can be calculated based on the arrangement of ions in the HCP structure. Overall, to determine the lattice parameter, density, and packing factor of BeO, it is necessary to know the exact crystal structure and atomic arrangement of the material.

Learn more about Berkelium oxide:

brainly.com/question/10197416

#SPJ4

Answer:

The summer solstice occurs in June in the Northern Hemisphere and December in the Southern Hemisphere.

A property known as an extensive property depends on the quantity of matter in a sample.

Intensive properties are independent of the amount of substance present.

What is substance?

A form of matter with predictable chemical composition and physical properties is referred to as a chemical substance. According to some references, a chemical substance cannot be physically divided into its component parts without rupturing chemical bonds.

Any substance that takes up space has mass, and is inert is said to be matter. The distinctive qualities that each substance possesses can be used to distinguish these substances from one another. Depending on how much of the substance is being described, these characteristics may or may not be affected.

The amount of the substance present has no bearing on the intensity of the properties. They could also be bulk properties. The trait remains constant. Intensive properties remain the same size. Intensive properties include things like density, temperature, pressure, and others.

The quantity of a substance affects its extensive properties. They are simple to recognize. Extensive properties' sizes change. It is calculable. Some examples of extensive properties are size, mass, length, and weight.

To learn more about the properties of substance, click on the below link:

https://brainly.com/question/24415905

#SPJ4

A diffusion equation is called so because it describes the diffusion of charge carriers in a material. The equation models the way in which the concentration of charge carriers (such as electrons or holes) changes over time and space in response to a concentration gradient.

Why is it referred to as a minority carrier equation ?

The minority carrier equation refers to the equation specifically for the case where the minority carrier species (i.e., the species with a lower concentration) is being considered. The equation is used to describe the diffusion of the minority carriers in a material, such as a semiconductor.

The diffusion equation is valid only under low-level injection conditions because at high injection levels, the carrier concentration becomes so large that the diffusion process is no longer described accurately by the simple diffusion equation. In this case, other effects such as recombination and generation become important, and the equation must be modified to account for these additional processes.

To learn more about diffusion equation:

https://brainly.com/question/14957639

#SPJ4

Mole fraction of potassium bromide: 0.452. To find the mole fraction of a solute in a solution

we need to determine the number of moles of solute and the total number of moles of solute and solvent.

We can first calculate the mass of potassium bromide in the solution, which is 40.0 g/100 g * 40.0 g = 16.0 g.

Then, we can convert the mass to moles using the molar mass of potassium bromide, which is 119.0 g/mol.

The number of moles of potassium bromide is 16.0 g / 119.0 g/mol = 0.134 mol.

Next, we can calculate the volume of the solution using its density, which is 1.37 g/mL * 16.0 g / 1.37 g/mL = 11.67 mL.

Finally, we can convert the volume to liters and use the number of moles of potassium bromide to find the number of moles of solvent (water).

The number of moles of solvent is 11.67 mL * 1 L/1000 mL = 0.0117 L * 1000 g/L = 11.7 g.

The total number of moles is 11.7 g / 18.0 g/mol = 0.65 mol. The mole fraction of potassium bromide is 0.134 mol / 0.65 mol = 0.452.

Learn more about Mole fraction here:

https://brainly.com/question/29808190

#SPJ4

Answer:

Explanation:

The half-life of a radioactive material is the time it takes for half of the material to decay. We can use this fact to determine how many half-lives old the rock is.

First, we need to find out how much of the radioactive material is left in the rock. We know that the rock has a mass of 40 grams, and 10 grams of that mass is the radioactive material. If we assume that all of the decay products (the stable product) are still in the rock, then the remaining mass of the radioactive material is:

10 grams * (1/2)^(number of half-lives)

where the factor (1/2) represents the fraction of the radioactive material that decays in each half-life.

We can rewrite this equation as:

(10 grams)/(40 grams) = (1/2)^(number of half-lives)

Solving for the number of half-lives, we get:

number of half-lives = log2(10/40) = log2(0.25) ≈ -2

This means that the rock is about 2 half-lives old. Since we can't have a negative number of half-lives, we can say that the rock is about 2 half-lives old or approximately 2 times the half-life of the radioactive material.

Answer:

The radioactive material in the rock undergoes radioactive decay, meaning that it spontaneously decays over time, transforming into another element and releasing radiation. The rate of decay is measured by the half-life, which is the amount of time it takes for half of the radioactive material to decay.

Since the rock contains 10 grams of radioactive material and 30 grams of stable product, we know that it originally contained a total of 40 grams of material. This means that half of the original material has decayed, since 20 grams of radioactive material would have decayed into 10 grams of stable product.

Since we know that one half-life has passed, we can use the formula N = N0(1/2)^(t/t1/2) to solve for t, the time that has passed in terms of the half-life. Here, N is the current amount of radioactive material, N0 is the original amount, t is the time that has passed, and t1/2 is the half-life.

Plugging in the values we know, we get:

10 = 40(1/2)^(t/t1/2)

Simplifying, we get:

1/4 = (1/2)^(t/t1/2)

Taking the logarithm of both sides, we get:

log(1/4) = (t/t1/2)log(1/2)

Solving for t/t1/2, we get:

t/t1/2 = log(1/4)/log(1/2) = 2

So, the rock is two half-lives old.

When calcium chloride is react with sodium carbonate there is formation of precipitate of calcium carbonate. The reaction is as follows:

CaCl2(aq]+Na2CO3(aq] → CaCO3(s]⏐↓+2NaCl(aq]

The term precipitation is defined as the process of conversion of a solution into solid by converting the substance into insoluble form or by making the solution a super saturated one.

Take two containers for Calcium chloride and sodium carbonate, measure with the help of graduated cylinders, then take these two compounds in a separate test tube and add tap water in it.

Thus, When calcium chloride is react with sodium carbonate there is formation of precipitate of calcium carbonate.

To learn more about the precipitation, follow the link;

https://brainly.com/question/18109776

#SPJ1

Yes, cations and anions are only found in ionic compounds.

An ionic compound is a type of chemical compound made up of cations (positively-charged ions) and anions (negatively-charged ions) held together by strong electrostatic forces called ionic bonds.Ions are the building blocks of ionic compounds, which are kept together by electrostatic forces.They are formed by the chemical bonding of a metal and a nonmetal. Ionic compounds are typically composed of positively charged cations (usually metals) and negatively charged anions (usually nonmetals). Examples of common ionic compounds include sodium chloride (NaCl), magnesium oxide (MgO), and calcium carbonate (CaCO3). An anion is an ion with a negative charge. Anions are formed when atoms gain electrons.A cation is an ion with a positive charge. Cations are formed when atoms lose electrons.

learn more about ionic compounds Refer:brainly.com/question/9167977

#SPJ4

Answer:

Good heat conductivity, low chemical reactivity, strength and durability are the qualities of Iron that make it a good material for making utensils.

Explanation:

Some materials are great in some areas but not so good in others. Iron is a great compromise. It has very good heat transfer for nice even heating and is tough.

Coal could not be considered as substitute products for industrial electricity generation as it is limited and non-renewable in nature.

Generally, coal is defined as a type of sedimentary deposit that is composed predominantly of carbon that is readily combustible. Coal is usually black or brownish-black in color and coal has a composition that which include inherent moisture and consists of more than 50 percent by weight and more than 70 percent by volume of coal contains carbonaceous material.

Coal is classified as a nonrenewable energy source because more than millions of years are required to form coal. The energy which are stored in coal is formed by plants that lived hundreds of millions of years ago in dense and swampy forests.

Hence, Coal could not be considered as substitute products for industrial electricity generation as it is limited and non-renewable.

Learn more about coal from the link given below.

https://brainly.com/question/30560160

#SPJ4

The boiling point of a solution prepared by dissolving 120 grams of sodium chloride (NaCl) in 500 grams of water will be higher than the boiling point of pure water.

The boiling point elevation of a solution depends on its concentration, which can be expressed as the molality (moles of solute per kilogram of solvent). To calculate the molality, we need to know the number of moles of NaCl in 120 grams. The molar mass of NaCl is 58.44 g/mol, so the number of moles of NaCl in 120 grams is 120 g / 58.44 g/mol = 2.06 moles.

The molality of the solution is therefore 2.06 moles / (500 g / 1000 g/kg) = 0.0412 moles/kg.

The boiling point elevation, ΔT, of a solution can be calculated using the formula ΔT = Kb x molality, where Kb is the molal boiling point elevation constant. The value of Kb for water is 0.52 °C/m.

So, the boiling point elevation of the solution is ΔT = 0.52 °C/m x 0.0412 moles/kg = 0.0212 °C.

The boiling point of pure water is 100 °C at standard atmospheric pressure, so the boiling point of the solution will be 100 °C + 0.0212 °C = 100.0212 °C.

Note that this is an approximation, as the boiling point elevation is not a linear function of molality, and the actual value will depend on various factors such as the pressure and temperature.

To know more about  boiling point , visit the link given below:

https://brainly.com/question/2153588

#SPJ4

Electron configuration of Cu - [Ar] 3d¹⁰ 4s¹

Electron configuration of F - [He] 2s2 2p5

Electron configuration of K - [Ar] 4s¹

We have to note that the electronic configuration of the atom has to do with the way that electrons are arranged in the orbitals of the atom. We know that the electrons are arranged in orbitals and that the orbits as well as the orbitals are found to be at various energy levels.

The quantum numbers has to do with the numbers that can help us to describe the position of the electron that is present in the atom.

Learn more about electron configuration:https://brainly.com/question/29757010

#SPJ1

In a reaction, the concentration of a reactant was increased from 2.5 m to 7.5 m and the rate was observed to change from 1.30e-2 m/s to 1.17e-1 m/s. 2 is the order of the reactant.

The rate law of a chemical reaction expresses the dependence of the reaction rate on the concentrations of the reactants. For a simple reaction involving only one reactant, the rate law has the form:[tex]rate = k[A]^n[/tex]

In this case, we have two sets of initial concentrations and rates:

Experiment 1:

[A] = 2.5 M

rate = 1.30 × [tex]10^-2 M/s[/tex]

Experiment 2:

[A] = 7.5 M

rate = 1.17 × [tex]10^-1 M/s[/tex]

Substituting the values from the experiments, we get:

[tex]1.17 × 10^-1 M/s / 1.30 × 10^-2 M/s = (7.5 M / 2.5 M)^n[/tex]

[tex]9 = 3^n[/tex]

Taking the logarithm of both sides, we get:

n = log(9) / log(3) = 2

Therefore, the order of the reaction with respect to the reactant is 2.

Learn more about concentration of a reactant here:

https://brainly.com/question/492238

#SPJ4

Crystals form through the process of crystallization which occurs when a liquid cools and solidifies.

The correct option is B

The formation of crystals is the process by which solid substances are removed from solutions. This technique is mostly used to separate a pure solid from the solution. There is a visible change.

A supersaturated solution nucleates the solute in the process of crystallization, which is a technique for turning a solution into a solid under the control of chemical equilibrium. The result is the formation of uniform particles with clearly defined morphologies that easily dissolve again.

Learn more about crystallization at: https://brainly.com/question/4155452

#SPJ1

The number of molecules present in 3.50 mol of nitrogen dioxide and number of atoms of oxygen are 2.108 x 10²⁴ molecules and 4.2161 x 10²⁴ molecules respectively.

Molecular formula of Nitrogen dioxide

= NO₂

Avogadro's number, defined as the number of units per mole of a substance (defined as molecular weight (g)), 6.02214076 × 10²³.

Using Avogadro's number, the number of atoms or molecules in one mole of a substance is 6.023 × 10²³. That is one mole NO₂ contains 6.023 × 10²³ molecules.

Number of NO₂ molecules in 3.50 mol

= 3.5 x 6.023 × 10²³

= 2.108 x 10²⁴ Molecules

Number of O₂ Molecules = 3.5 x 2 x 6.023 × 10²³

= 4.2161 x 10²⁴ Molecules

Oxygen will be two times more than NO₂ because each NO₂ molecule has 2 oxygen atoms.

To learn more about Avogadro's number, visit :

https://brainly.com/question/10614569

#SPJ4

Nucleus is surrounded by a cloud of electrons.

Nucleus contains protons.

Protons are attracted to electrons.

Electrons have negative electrical charge.

Protons have positive electrical charge.

An atom is the smallest particle of an element that can take part in a chemical reaction.

Atoms of elements are composed of three sub-atomic particles, namely:

Learn more about atomic particles at: https://brainly.com/question/28763045

#SPJ1

Salicylic acid by itself should effectively unclog your pores if you have blackheads and whiteheads. Choose benzoyl peroxide to stop outbreaks at the root if your acne frequently manifests as inflammatory papules and pustules. Start with salicylic acid for sensitive skin because it's less likely to irritate it.

Depending on the dose form and strength of the preparation, salicylic acid topical is used to treat a variety of skin conditions, including psoriasis, psoriasis of the skin and scalp, calluses, corns, common warts, and plantar warts.

What is the difference between benzoyl peroxide and salicylic acid?

Salicylic acid and benzoyl peroxide differ greatly in how they are used: While benzoyl peroxide truly destroys the bacteria that causes acne, salicylic acid purges whatever is hiding in your pores.

Salicylic acid opens pores and has a slight sloughing, exfoliating action, according to research on the chemical distinctions between these two acne-fighting ingredients. But because benzoyl peroxide has higher antioxidant and anti-microbial properties, it is more effective at curing acne.

Therefore, Salicylic acid or benzoyl peroxide work better for cystic acne is mentioned above.

Learn more about salicylic acid from the given link.

https://brainly.com/question/14711636

#SPJ4

In straight-chain alkanes, the carbon atoms on each end of the molecule always form bonds with atoms of hydrogen; the carbons within the molecule always form bonds with hydrogen atoms, 3; 2. so, option (c) is correct.

the smallest component of a substance that is resistant to chemical oxidation. Each atom's nucleus (centre) is composed of a proton (a positive particle) and a neutron (a neutral particle) (particles with no charge).

Negative electrons are present in the nucleus in large quantities. Atoms are indivisible particles that cannot be created or destroyed by chemical reactions. Atoms of an element have the same mass and chemical composition. Different elements have different atom masses and chemical properties.

Each molecule contains an individual number of atoms. Now a part of Molecule's expanding line of sleep necessities are pillows, sheets, and mattress toppers. The Molecule AirTEC Mattress Topper combines three layers of polyfoam, open-cell memory foam, and AirTEC foam to provide sleepers with a comfortable, cool sleeping surface.

Therefore, in straight-chain alkanes, the carbon atoms within the molecule always form bonds with hydrogen atoms, 3; and the carbon atoms on either end of the molecule always form bonds with hydrogen atoms, 2. The answer should be (c).

Learn more about atoms from the given link.

https://brainly.com/question/17545314

#SPJ1

Answer: A divergent boundary occurs when two tectonic plates move away from each other. Along these boundaries, earthquakes are common and magma (molten rock) rises from the Earth's mantle to the surface, solidifying to create new oceanic crust.

yes very good

Answer:

the water would most likely become more acidic.

Explanation:

this is due to carbon dioxide being slightly acidic, it dissolves into the water inturn decreasing the pH.


i also posted this on your question a minute ago before you posted it in the right catagory.

1. The final volume of the resulting solution is 140 milliliters

2. The final concentration of the resulting solution is 17%

The final volume of the resulting solution cvan be obtained as illustrated below:

Final volume of solution (V₂) = Initial volume + Volume of water

Final volume of solution (V₂) = 40 + 100

Final volume of solution (V₂) = 140 milliliters

Thus, the final volume of solution is 140 milliliters

The final concentration of the solution can be obtained as follow:

M₁V₁ = M₂V₂

60 × 40 = M₂ × 140

Divide both side by 140

M₂ = (60 × 40) / 140

M₂ = 17%

Thus, the final concentration of the solution is 17%

Learn more about dilution:

https://brainly.com/question/15022582

#SPJ1

Answer:

uhhh

Explanation:

uhhh

Partial pressure of the He in a container at a pressure of 950mmHg is 475mmHg.

In a combination of gases, every constituent gas has a fractional strain which is the notional pressure of that constituent gas as though it alone involved the whole volume of the first blend at the equivalent temperature.[1] The complete tension of an ideal gas combination is the amount of the halfway tensions of the gases in the combination (Dalton's Regulation).

The partial pressure of a gas is a proportion of thermodynamic movement of the gas' particles. Gases break up, diffuse, and respond as per their fractional pressure however not as per their fixations in gas blends or fluids. This overall property of gases is likewise obvious in substance responses of gases in science. For instance, the essential measure of oxygen for human breath, and the sum that is poisonous, is set by the incomplete tension of oxygen alone.

Partial pressure=mole fraction amount ×total pressure.

So,mole fraction= [(12/4) / (12/4) + (40/20.179) + (83.8/83.798) ]

=>Partial pressure=3 / (3+2+1) ×950

=>Partial pressure=(3 ×950) / 6

=>Partial pressure=475mmHg.

Hence,partial pressure of the He is 475mmHg.

To know more about partial pressure,visit here:

https://brainly.com/question/14281129

#SPJ4

One of the four main macromolecules necessary for an individual's growth, development, metabolism, and nutrition are lipids.

Proteins, lipids, carbohydrates, and nucleic acids make up the four main groups of biological macromolecules; each is a vital part of the cell and has a variety of jobs to do. These molecules make up most of the dry mass of a cell when combined (recall that water makes up the majority of its complete mass).

The cell membrane, which shields the cell, maintains the movement of the component across it, and gives the cell a framework, is formed in large part by lipids. The digestive systems, including the liver, process lipids, which constitute an important component of the diet.

To learn more about macromolecules here:

https://brainly.com/question/15237842

#SPJ4

Full Question = Why did lipids make Sudan IV have a red-orange line at the top of the test tube?

A 0. 674M cobalt (II) chloride (CoCl₂) solution is prepared with a total volume of 0. 0750L. The molecular weight of CoCl₂ is 128. 9 g/mol. 6.55 g of CoCl₂ in grams is needed for this solution

Given that

A 0. 674M cobalt (II) chloride (CoCl₂) solution is prepared with a total volume of 0. 0750L.  

And the molecular weight of CoCl₂ is 128. 9 g/mol. The mass of CoCl₂ in the solution is 6.55 grams.

To determine the mass of cobalt (II) chloride (CoCl₂) present in a 0.0750 liter solution with a concentration of 0.674 M, a few calculations must be performed.

Firstly, the moles of CoCl₂ can be found by multiplying the concentration by the volume. The concentration of 0.674 M means there are 0.674 moles per liter, so for the 0.0750 liter solution, there are

0.674 moles × 0.0750 L

= 0.0505 moles of CoCl₂.

Secondly, the molecular weight of CoCl₂ is 128.9 g/mol, which can be used to find the mass in grams by multiplying the moles of CoCl₂ by the molecular weight.

The final calculation is

0.0505 moles × 128.9 g/mol

= 6.55 g,

Meaning that the mass of CoCl₂ in the solution is 6.55 grams.

To know more about the mass of solute in solution, visit: https://brainly.com/question/16428405

#SPJ4

The pKa of a compound is the pH at which the compound is half-ionized. At a pH of 2.24, the aspirin is mostly in the form of its acid, so we can assume that the pKa of aspirin is 2.24.

Half-ionized refers to a state where some, but not all, of the molecules or atoms have had one or more of their electrons removed and become positively charged ions. This can occur either naturally in a gas or as a result of electromagnetic radiation, such as X-rays, passing through the gas. In some cases, such as in the interstellar medium, the gas is only partially ionized, meaning that only a fraction of the atoms or molecules have been affected. In such cases, the fraction of the gas that has been ionized is referred to as the ionization fraction. Half-ionized gas can be found in extreme environments, such as those found in star-forming regions or in the outer layers of the atmosphere of Jupiter. The half-ionized state can also be found in laboratories, where lasers can be used to create plasmas with a range of ionization fractions.

[tex]$$\begin{aligned}& \text { Reaction :- Aspirin } \rightarrow \mathrm{Asp}^{-}+\mathrm{H}^{+} \\& 0.1-x \times x \\& \mathrm{Ka}=\frac{\left[\mathrm{Asp}^{-}\right]\left[\mathrm{H}^{+}\right]}{\text {(Aspirin) }} \\& =\frac{x^2}{0.1-x} \\& \text { Find out }[\mathrm{H}+]=\mathrm{x} \\& \mathrm{PH}=-\log _{10}\left[\mathrm{H}^{+}\right] \\& \log _{10}\left[\mathrm{H}^{+}\right]=2.24 \\& {\left[\mathrm{H}^{+}\right]=\text {antilog } 2.24} \\& =1.73 \times 10^{-2}=x \\&\end{aligned}$$[/tex]

[tex]$$\begin{aligned}& \text { Now Ka }=\frac{x^2}{0.1-x} \\& \mathrm{Ka}=\frac{1.73 \times 10^2}{0.1-0.0173} \\& \mathrm{Ka}=\frac{\left(\left(1.73 \times 10^{-2}\right)\right)^2}{0.0627} \\& \mathrm{Ka}=\frac{2.9929 \times 10^{-1}}{0.01827} \\& \mathrm{Ka}=36.32 \times 10^{-4}=3.63 \times 10^{-3} \\& \text { Pka }=-\log _{10} \mathrm{ka} \\& =-\log \left(3.63 \times 10^{-3}\right) \\& =2.44\end{aligned}$$[/tex]

Thus, pKa of aspirin is 2.24

To learn more about half-ionized

https://brainly.com/question/29805108

#SPJ4

The right response is B. The power of attraction between two charged particles is conversely relative to the square of the distance between them.

Since the hydrogen nucleus is nearer to the carbon nucleus than the other way around, the power experienced by the hydrogen nucleus is more prominent than that accomplished by the carbon nucleus. In this way, the extent of the power experienced by the hydrogen nucleus is higher than that of the carbon nucleus, and the heading of the power is towards the carbon.

This implies that the electrical power experienced by the hydrogen nucleus is to one side, and the extent is more prominent than the power applied to the carbon nucleus.

Learn more about the nucleus:

https://brainly.com/question/17704494

#SPJ4

The question is -

A hydrogen nucleus, which has a charge e, is situated to the left of a carbon nucleus which has a charge 6e. Which statement is true?

A) The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is equal to the force exerted on the carbon nucleus.

B) The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is greater than the force exerted on the carbon nucleus. C) The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is less than the force exerted on the carbon nucleus.

D) The electrical force experienced by the hydrogen nucleus is to the right, and the magnitude is equal to the force exerted on the carbon nucleus