If 3.37 g of hcl is reacted with exc3ss fe and 4.20g of fecl2 then the %yield for the reaction will be 71.56%.
The percent yield for a reaction can be calculated as follows:
% yield = (actual yield / theoretical yield) x 100
First, we need to find the theoretical yield of FeCl2. To do this, we need to determine the number of moles of Fe that reacted with the HCl. The balanced chemical equation for this reaction is:
Fe + 2HCl → FeCl2 + H2
From the given information, we know that 3.37 g of HCl was used in the reaction. We can use the molar mass of HCl (36.46 g/mol) to convert this mass to moles:
3.37 g HCl / 36.46 g/mol = 0.0927 moles HCl
Since two moles of HCl react with one mole of Fe, the number of moles of Fe used in the reaction is half of the number of moles of HCl:
0.0927 moles HCl / 2 = 0.04635 moles Fe
Next, we can use the molar mass of FeCl2 (126.90 g/mol) to determine the theoretical yield of FeCl2:
0.04635 moles FeCl2 x 126.90 g/mol = 5.89 g FeCl2
Finally, we can calculate the percent yield:
% yield = (4.20 g FeCl2 / 5.89 g FeCl2) x 100 = 71.56%
So, the percent yield of FeCl2 in this reaction is 71.56%.
Learn more about fecl2 here:
https://brainly.com/question/18943433
#SPJ4
How many pivot columns must a 7 5 matrix have if its column are linearly independent Why?
7 × 5 matrix must have exactly five pivot columns for the columns of the matrix to be linearly independent.
The above given matrix can only have 5 pivot columns for the system to be linearly independent.
Recall that in the system of equations.
Ax = b
Where,
"A" is denoted as the coefficient matrix of the incognita vector x and
"b" is denoted as the solution vector.
The extended matrix is given as,
(A l b)
So, we can conclude that if the matrix has more than 5 pivot columns, then the system is linearly dependent.
Hence, 7 × 5 matrix must have exactly five pivot columns for the columns of the matrix to be linearly independent.
Learn more about pivot columns from the link given below.
https://brainly.com/question/28583749
#SPJ4
Peptides can be separated using an ion-exchange column based on their isoelectric (pi) values. At which ph values would two different peptides, one with a pi of 5. 0 and the other with a pi of 9. 2, bind to a cation- and anion-exchange column? each peptide may be capable of binding to each column at more than one ph value
pH values would allow two distinct peptides—one having a pi of 5.0 and the other having a pi of 9.2—to bind to a cation- and anion-exchange column. When pH equals 10.8, pH > pI (A) and pI (B):
Proteins that have a net negative charge will bind to an anion exchange column when pH > pI.
When pH pI, the protein will bind to the cation exchange column because it has a net positive charge.
Given: Peptide B: pI = 9.0 Peptide A: pI = 5.2
1) At pH = 3.5, the equation is pH pI (A) and pI (B). The cation exchange column is the sole place where A and B will both bind.
2) The pI (A) will bind to anion exchange at pH = 6.5.
B will bind to the cation exchange in the pH pI range.
pH = 10.8 pH > pI (A) and pI (B): Both will bind to the anion exchange column exclusively.
Learn more about pH here:
https://brainly.com/question/30390372
#SPJ4
in the mechanism for the acid-catalyzed hydrolysis of an ester, what species could be represented by hb ?
In the mechanism for the acid-catalyzed hydrolysis of an ester, "HB" could refer to a hydrogen bond. Hydrogen bonds are a type of non-covalent interaction that occur between a hydrogen atom that is covalently bonded to one electronegative atom (such as nitrogen or oxygen) and another electronegative atom.
Hydrolysis is a chemical reaction of the interaction of chemicals with water, leading to the decomposition of both the substance and water. Reactions of hydrolysis are possible with salts, carbohydrates, proteins, fats, etc.
In the mechanism for the acid-catalyzed hydrolysis of an ester, hydrogen bonds may play a role in stabilizing the intermediate species that are formed during the reaction. For example, the hydrogen bond may occur between the hydrogen ion (H+) of the acid catalyst and the oxygen atom of the ester molecule. This interaction helps to facilitate the transfer of the hydrogen ion to the ester molecule, leading to the formation of the intermediate species that are involved in the hydrolysis reaction.
Without more information about the specific mechanism you are referring to, it is difficult to say exactly what species is represented by "HB".
learn more about hydrolysis here:
https://brainly.com/question/29439050
#SPJ4
if 2.000 g of water was cooled 3.00 °c, how much heat was transferred to the water?
2.000 g of water was cooled 3.00 °c, 25.104 J heat was transferred to the water.
To calculate the amount of heat transferred to the water, we can use the following formula:
Q = mcΔT
where Q is the amount of heat transferred, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature of the water.
Given that the mass of the water is 2.000 g and the change in temperature is 3.00 °C, we can find the amount of heat transferred as follows:
Q = (2.000 g) x (4.184 J/g·°C) x (3.00 °C)
Q = 25.104 J
Therefore, the amount of heat transferred to the water is 25.104 J.
Learn more about temperature here:
https://brainly.com/question/11464844
#SPJ4
What mass of hydrogen gas is produced from complete reaction of 2.00 g of sodium metal with excess water? The only other product of the reaction is sodium hydroxide.
Group of answer choices
351 mg
87.7 mg
43.8 mg
175 mg
Answer:
43.8 mg
Explanation:
.....................
43.8 mg is the mass of hydrogen gas which is produced from complete reaction of 2.00 g of sodium metal with excess water.
What is hydrogen gas?Methane, often known as natural gas, may be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Many hydrogen atoms may be found in water, plants, animals, and, of course, people here on earth.
While it is found in almost all living organisms' molecules, it is extremely rare as a gas, with a volumetric concentration of less than a part per million. A number of sources, including natural gas, nuclear energy, biogas, and renewable energy sources like sun and wind, can be used to manufacture hydrogen.
2Na + 2H[tex]_2[/tex]O [tex]\rightarrow[/tex] 2NaOH +H[tex]_2[/tex]
moles of sodium = 2/23=0.08moles
the mole ratio between sodium and hydrogen is 2:1
moles of hydrogen =0.04moles
mass of hydrogen ==0.04moles×2=43.8 mg
Therefore, 43.8 mg is the mass of hydrogen gas.
To know more about hydrogen gas, here:
https://brainly.com/question/11426882
#SPJ2
what equipment is used ot hold a dissolved substaqnce in water and can then be placed on a hot plate to drive off the water
A commonly used piece of equipment to hold a dissolved substance in water and then place it on a hot plate to drive off the water is a rotary evaporator or a rotovap.
This equipment consists of a flask that holds the solution, a heating bath to control the temperature, a vacuum pump to reduce the pressure, and a rotating mechanism that spins the flask.
The flask is filled with the dissolved substance and water, and the rotation causes the solution to form a thin film on the flask wall. The hot plate heats the solution, causing the water to evaporate, and the vacuum pump removes the resulting water vapor. The reduced pressure helps to lower the boiling point of the water, making it easier to evaporate.
The rotary evaporator is a useful tool in chemical synthesis and purification because it allows for efficient removal of solvents and can be used for large-scale operations. It also helps to maintain a low temperature, which can be important for delicate reactions or to avoid thermal degradation of the substance being purified.
Learn more about rotary evaporator:
brainly.com/question/17173543
#SPJ4
The rapid destruction of tropical rain forests may be harmful because
The rapid destruction of tropical rain forests is harmful because it reduces habitats for animals and plants, leading to a decrease in biodiversity.
It can also cause climate change due to reduced carbon absorption and an increase in heat-trapping greenhouse gases, resulting in more extreme weather patterns. The destruction of tropical rain forests is a serious concern, with millions of acres destroyed worldwide each year. This destruction can be attributed to many causes, such as illegal logging, wildfires, over-farming and over-grazing. As a result, essential services and resources provided by the forests, such as clean water and soil health, are diminished. Additionally, the trees themselves can store large amounts of carbon, which is released into the atmosphere when they are burned or cut down. This further contributes to climate change, as carbon dioxide is a major heat-trapping greenhouse gas. Furthermore, deforestation reduces the habitats of many animals, leading to a decrease in biodiversity.
Learn more about destruction here:
https://brainly.com/question/1165953
#SPJ4
why doesn't oil mix with water? why doesn't oil mix with water? (a) nonpolar molecules repel water molecules. (b) polar molecules repel nonpolar molecules. (c) polar molecules attract one another. (d) nonpolar molecules attract one another. both (a) and (d).
Due to nonpolar molecules' ability to reject water molecules, oil and water do not combine. Nonpolar molecules are attracted to polar molecules.
Oil molecules have a non-polar structure. Instead of having a positive and negative end, its charge is uniformly distributed. Accordingly, water and oil never combine because water and oil molecules are more attracted to each other than oil molecules are to each other. In actuality, oils are hydrophobic, or "fearful of water." Oil molecules are repelled by water molecules as opposed to being drawn to them. Because of this, when you add oil to a cup of water, the two don't mix.
Learn more about nonpolar molecules from here:
https://brainly.com/question/28300881
#SPJ4
compute the theoretical density of iron that has a bcc crystal structure, an atomic radius of 0.124 nm, and an atomic weight of 55.85 g/mol.
The theoretical density of iron that has a bs=cc crystal structure, an atomic radius of 0.124 nm, and an atomic weight of 55.85 g/mol is 7.87 [tex]g/cm^3.[/tex].
To compute the theoretical density of iron with a bcc crystal structure, we can use the formula:
density = (Z × M) / ([tex]a^3[/tex] × N_A)
where Z is the number of atoms per unit cell, M is the molar mass of the element (55.85 g/mol for iron), a is the lattice parameter, which is related to the atomic radius (a = 4√(2) × r/3 for bcc structure), and N_A is Avogadro's constant (6.022 × [tex]10^23 mol^-1).[/tex]
Substituting the given values, we get:
a = 4√(2) × r/3 = 4√(2) × 0.124 nm × (1 m / [tex]10^9[/tex] nm) / 3 = 0.287 nm
density = (2 × 55.85 g/mol) / (0.287 nm)^3 / (6.022 × [tex]10^23[/tex] mol^-1) = 7.87 g/cm^3
Therefore, the theoretical density of iron with a bcc crystal structure, an atomic radius of 0.124 nm, and an atomic weight of 55.85 g/mol is 7.87 [tex]g/cm^3.[/tex].
Learn more about theoretical density here:
https://brainly.com/question/30587943
#SPJ4
Classify the picture below by placing the correct label in the blank:
E = 1 type of element
C = 1 type of compound
MOE = mixture of elements
MOC = mixture of compounds
MOEC = mixture of elements and compounds
The correct label for the picture given is MOC = mixture of compounds.
How to know a mixture of compounds ?A compound is made up of atoms from various elements that have been chemically mixed in a specific ratio. Different elements are found in compounds in a predetermined order and set ratio thanks to chemical bonding.
Different types of compounds are created as a result of several changes in the chemical characteristics and structures. However, whether they are present in any composition or not, the elements normally exist in a constant ratio.
This is a compound because the atoms shown are of different elements - as shown by their colors - and are yet bound together. They are also bound together in different ratios which shows there are different compounds in a mixture.
Find out more on compounds at https://brainly.com/question/26487468
#SPJ1
a process increases the entropy of the system by 268 j/mol k and absorbs 10.37 kj/mol of heat from the surroundings. at what temperature will this process begin to favor products?
The reaction will begin to favor products at a temperature of 38.7 K in this experiment.
ΔG. ΔG = ΔH – TΔS, where ΔH is the change in enthalpy, T is temperature, and ΔS is the change in entropy.
For this particular reaction, the change in enthalpy is 10.37 kJ/mol and the change in entropy is 268 J/mol K. Therefore, the Gibbs free energy is -10.14 kJ/mol.
This means that the reaction will begin to favor products when the temperature is high enough to offset the negative change in Gibbs's free energy.
To calculate the temperature at which the reaction will favor products, we use the equation
ΔG = 0 = ΔH – TΔS.
Solving for T, we get
T = ΔH/ΔS = 10.37 kJ/mol/268 J/mol K = 38.7 K.
Therefore, the reaction will begin to favor products at a temperature of 38.7 K.
Learn more about entropy:
https://brainly.com/question/30481619
#SPJ4
If car A is traveling 20 mph and is hit from behind by Car B (approximately the same mass) traveling 60 mph, what will happen to the acceleration of car A immediately after the crash?
Car A will decelerate.
Car A will not accelerate.
Car A will accelerate in the direction of motion.
Car A will spontaneously combust from impact.
Car A will spontaneously combust from impact. Therefore, the correct option is option D among all the given options.
What is acceleration ?Acceleration is the rate upon which velocity varies over time, both in terms of speed and direction. A point or object travelling in a straight path is accelerated if something accelerates or decelerates.
Regardless of whether the speed remains constant, motion on such a circle gets accelerated because the orientation is always changing. Both redistribution to acceleration in all other types of motion. If car A is traveling 20 mph and is hit from behind by Car B (approximately the same mass) traveling 60 mph, Car A will spontaneously combust from impact.
Therefore, the correct option is option D.
To learn more about acceleration, here:
https://brainly.com/question/24341162
#SPJ1
Answer:
Car A will accelerate in the direction of motion.
Explanation:
If a car driving slowly was hit from behind by a car going 3 times its speed, car A will be pushed forward in result.
Which of the following is not true about traits?
A. Traits can skip generations.
B. Traits always shows up in at least one offspring.
C. Traits are passed to offspring.
D. Traits are observable.
Answer: Option B
Explanation: Answer B. Traits always show up in at least one offspring is not true.
Answer:
Option B is not true about traits. Traits do not always show up in at least one offspring. The expression of traits in offspring depends on the genetic makeup of the parents and the way their genes interact with each other during inheritance. Some traits may skip generations or not appear in any offspring at all.
Explanation:
the combustion of 40.5 mg of a compound extracted from the bark of the sassafras tree and known to contain c, h, and o produces 11.0 mg co2 and 22.5 mg of h2o. the molar mass of the compound is 162 g.mol. what is the molecular formula?
If the combustion of 40.5 mg of a substance taken from the bark of the sassafras tree and known to include c, h, and o results in 11.0 mg co2 and 22.5 mg of water, the molecular formula is C5H502 = C10H10O2.
The amount of substance removed from the sassafras tree's bark was 40.5 mg, while the amount of CO2 produced was 110.0 mg.
obtained water mass = 22.5g
Calculation of C, H, and O percentages
12 g of Carbon is present in 44 g of CO2. Similarly 2 g of H is present in 18 g of water. Using this we calculate
Percentage of C = 12/44 x Mass of CO2 / Total mass of Compound X 100 = 12/44 x 110.0/40.5 x 100 = 74.07
Percentage of H =2/18 x Mass of H2O / Mass of compound = 2/18 x 22.5/40.5 x 100 = 6.17
Percentage of O =100-6.17-74.07=19.76 ( As compound contains only C H and O)
Calculation of emperical formula
Element Percentage No of Atoms Relative atomic ratio whole no . composition ratio
C 74.07 74.07/12 = 6.1725 6.1725/1.235 = 4.9975 5
H 6.17 6.17/1 = 6.17 6.17/1.235 = = 4.9959 5
O 19.76 19.76 /16 = 1.235 1.235/1.235 = 1 1
Hence, Emperical Formula is C5H50
Molecular mass of compound = 162g/mol
Emperical mass = 60+5+16=81g/mol
So multiplying factor (n) = Molar mass/emperical mass= 162/81=2
So Molecular formula= C5H502 = C10H10O2
Learn more about Molecular here:
https://brainly.com/question/14614762
#SPJ4
which of the cations in the table above would you predict would form iodides (compounds with iodine, i) having the cesium chloride (cscl) structure? group of answer choices al3 ba2 ca2 cs fe2 fe3 k mg2 mn2 na ni2 si4 ti4
The cations in the table above that would form iodides having the CsCl structure are Na, K, and Ca2+.
What is structure?Structure is a system of organization or arrangement of parts that creates a whole. It refers to the way a system or object is arranged or put together. Structures can be found in both physical and abstract forms, such as language, physical objects, and organizations. Physical structures include buildings, bridges, and other forms of architecture. Abstract structures include computer programs, laws, and social organizations. Structures are used to create order and stability, and can often be used to solve problems. In many cases, structure can be used to create something that is efficient, functional, and aesthetically pleasing.
Based on the cesium chloride (CsCl) structure, the cations that would form iodides having the CsCl structure would be those that have a +1 charge, such as Na+, K+, and Ca2+. Therefore, the cations in the table above that would form iodides having the CsCl structure are Na, K, and Ca2+.
To learn more about structure
https://brainly.com/question/29499504
#SPJ4
a mixture consists of 122 moles of n2, 137 moles of c3h8, and 212 moles of co2 at 200 k in a 75.0 l container. what is the total pressure of the gas and the partial pressure of co2? (show your work)
A mixture consists of 122 moles of n2, 137 moles of c3h8, and 212 moles of co2 at 200 k in a 75.0 l container. The total pressure of the gas is 2850.89 kilopascals and the partial pressure of CO2 is 1307.48 kilopascals.
The total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas. The partial pressure of a gas is proportional to the number of moles of that gas present in the mixture. In this case, we can use the ideal gas law, PV = nRT, to find the partial pressures.
First, we need to find the molar gas constant R:
R = 8.31 J/mol * K
Next, we need to find the temperature in Kelvin:
T = 200 K
Now, we can calculate the partial pressure of each gas in the mixture:
P N2 = (122 moles . R . T) / (75.0 L) = 122 . 8.31 . 200 / 75.0 = 735.72 kilopascals.
P C3H8 = (137 moles . R . T) / (75.0 L) = 137 . 831 . 200 / 75.0 = 807.69 kilopascals.
P CO2 = (212 moles . R . T) / (75.0 L) = 212 . 831 . 200 / 75.0 = 1307.48 kilopascals.
Finally, we can find the total pressure of the mixture:
Ptotal = P N2 + P C3H8 + P CO2
Ptotal = 735.72 + 807.69 + 1307.48
Ptotal = 2850.89 kilopascals
So, the total pressure of the gas is 2850.89 kilopascals, and the partial pressure of CO2 is P CO2 = 1307.48 kilopascals.
Here you can learn more about The Partial Pressure
brainly.com/question/23949164
#SPJ4
pls help with chemistry!
a.
The limiting reactant is O2
b.
The amount of excess reactant (H2) that remains is 0 grams
c.
The amount of H2O produced is 40 grams.
What is a limiting reactant?The limiting reactant in a chemical reaction is described as a reactant that is totally consumed when the chemical reaction is completed.
the reactant that runs out first and determines the amount of product that can be produced.
To find the limiting reactant, we do the following:
From 20 grams of H2, we can produce 40 grams of H2O.
From 96 grams of O2, we can produce 48 grams of H2O.
we know that the amount of H2O produced from O2 is less than that produced from H2, O2 is the limiting reactant.
The amount of excess reactant (H2) that remains is 20 grams - 40 grams = 0 grams.
In conclusion, the amount of H2O produced is 40 grams.
Learn more about limiting reactant at: https://brainly.com/question/14222359
#SPJ1
From the balanced equation of the reaction, the mole ratio of H2 to O2 is 2:1.
Mole of 20 grams H2 gas = 20/2 = 10 moles
Mole of 96 grams O2 gas = 96/32 = 3 moles
Thus, the limiting reactant is O2 gas.
Stoichiometric mole of H2 gas = 2 x 3 = 6 moles
Excess mole of H2 gas = 10 - 6 = 4 moles
Mass of 4 moles H2 gas = 4 x 2 = 8 grams
Equivalent mole fo H2O formed = 3 x 2 = 6 moles
Mass of 6 moles H2O = 6 x 18 = 108 grams.
In summary:
The limiting reactant is O2The remaining excess reactant is 8 gramsThe amount of H2O produced is 108 gramsMore on stoichiometric problems can be found here: https://brainly.com/question/14301905
#SPJ1
how many moles of air would be inside the box at the pressure calculated in part c? (at 1 atm pressure, this box would contain 41.4 mol of air.)
41.4 mol air would be inside the container at the tension determined to a limited extent c.
41.4 mol air would be inside the container at the tension determined to a limited extent c in light of the fact that the strain of the air inside the container is 1 atm. Since the molar mass of air is 28.97 g/mol, the crate would contain 41.4 mol of air at this tension. The molar mass of air is the typical molar mass of the parts of air, which are nitrogen, oxygen, argon, carbon dioxide, and other following gases. In this manner, the number of moles of air inside the container at the tension determined to a limited extent c is equivalent to 41.4 mol.
Computation of tension of the air inside the container.
To ascertain the tension of the air inside the container, the ideal gas regulation condition is utilized which is:
where P is the strain, V is the volume of the container, n is the number of moles of air, R is the all-inclusive gas consistency, and T is the temperature of the crate.
In this manner, the tension of the air inside the container can be determined as follows:
where V and T are the volume and temperature of the container, individually.
To know more about the pressure of the air inside the box calculate here
brainly.com/question/30426546
#SPJ4
Identity elements x has 2 electron in k shell 8 electron in L shell and 5 electron in M shell
Explanation:
Based on the information provided, it's possible to determine that the identity element in question is an element with atomic number 20, Calcium (Ca). Calcium has 2 electrons in the K-shell, 8 electrons in the L-shell, and 5 electrons in the M-shell.
when 1-propanol is exposed to socl2, followed by magnesium, then a 2-carbon aldehyde, and then aqueous workup, what is the resulting product?
When 1-propanol is exposed to SOCl2, followed by magnesium, then a 2-carbon aldehyde, and then aqueous workup, the resulting product is 2-methyl-2-propanol.
This reaction is known as the Grignard reaction, and is an important reaction in organic synthesis. It involves the addition of an organometallic reagent, such as RMgX (where R is an organic group and X is a halogen), to a carbonyl group. In this case, the 2-carbon aldehyde is the carbonyl group and the R group is the 1-propanol.
The reaction is followed by aqueous workup, which involves treating the reaction mixture with aqueous acid to hydrolyze the product.
Learn more about 1-propanol to socl2:
https://brainly.com/question/11886017
#SPJ4
Is an aqueous solution of NaHSO4 acidic, basic or neutral? Support your answer with a chemical equation. Hint: focus on HSO4- dissociation
An aqueous solution of sodium bisulfate (NaHSO4) is acidic. Sodium bisulfate dissociates in water to form the bisulfate ion (HSO4-) and the sodium ion (Na+). This reaction can be represented by the following chemical equation:
NaHSO4 (s) → Na+ (aq) + HSO4- (aq)
The bisulfate ion is a weak acid, and it dissociates further in water to form the sulfate ion ([tex]SO4^{2-}[/tex]) and the hydrogen ion (H+):
HSO4- (aq) → H+ (aq) + SO42- (aq)
This additional dissociation of HSO4- increases the concentration of H+ ions in the solution, making the solution acidic. The presence of H+ ions in the solution means that the solution has a pH of less than 7, which is the definition of an acidic solution.
What is an aqueous solution?
An aqueous solution is a sort of mixture in which one or more solutes have been dissolved in water as the solvent. Any kind of material, including salts, acids, bases, and sugars, can serve as solutes. The word "aqueous" describes a solution's water content. These kinds of solutions are prevalent in biology and chemistry and are essential to numerous industrial and natural processes.
An aqueous solution is one in which water serves as the solvent. In chemical equations, it is often represented by adding to the appropriate chemical formula. For instance, Na⁺ + Cl⁻ might be used to depict a solution of table salt, or sodium chloride, in water.
Water, which makes up around 70% of the mass of the human body and is necessary for life, serves as the solvent in aqueous solutions.
To know more about an aqueous solution, check out:
https://brainly.com/question/28166001
SPJ1
review table 3-2, p. 50, that includes the substances you will test for reducing sugars in your lab. which solution should be used as either a positive or negative control for the test for reducing sugars?
Table 3-2 on page 50 lists various substances that can be tested for reducing sugars in the lab. The positive control for the test for reducing sugars would typically be a known reducing sugar, such as glucose or fructose, while the negative control would typically be a non-reducing sugar, such as sucrose. These controls are used to confirm the reliability and accuracy of the test results.
The positive control will give a positive result for the presence of reducing sugars, while the negative control should give a negative result, indicating the absence of reducing sugars. By comparing the results of these two controls with the results obtained for the unknown substances, the reliability and accuracy of the test can be confirmed.
To know more about reducing sugars, visit the link given below:
https://brainly.com/question/30022610
#SPJ4
what is the molarity of an aqueous solution that is 14.3% sucrose by mass? sucrose is c12h22o11 (molar mass 342 g/mol). the density of the solution is 1.05 g/ml
The molarity of an aqueous solution that is 14.3% sucrose by mass is 0.039 M.
What is molarity ?The term molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution.
Given:
molar mass of sucrose = 342 g/mol
the density of the solution = 1.05 g/ml
1 mole of sucrose = 342.3 grams.
Now, Divide 342.3 by 14.3 , which will give you 0.041. This is the number that will go in the numerator position of your equation.
Now, divide 0.041 by 1.05 (the number of liters), which will equal 0.039 M
Thus, the molarity of an aqueous solution that is 14.3% sucrose by mass is 0.039 M.
To learn more about the molarity, follow the link;
https://brainly.com/question/8732513
#SPJ1
What is the change in pH if 0.005mol of NaOH is added to 0.50L of solution
The pH will rise as a result of the addition of NaOH because it will increase the amount of OH- ions in the solution.
What is pH?The pH of a solution determines whether it is acidic or basic. It is described as the hydrogen ion (H+) concentration in a solution expressed as a negative logarithm.
The formula for the concentration of hydroxide ions can be used to determine how the pH of a solution will change when 0.005 mol of NaOH is added to 0.50 L of the solution (OH-). The pH will rise as a result of the addition of NaOH because it will increase the amount of OH- ions in the solution.
A neutral solution has a pH of 7, while a basic solution has a pH higher than 7. The initial pH and hydrogen ion (H+) concentration of the solution will determine the precise pH change. If the starting solution is acidic, adding NaOH will cause a considerable rise in pH. The pH will only slightly rise if the starting solution is neutral or mildly basic.
To know more about pH, visit:
https://brainly.com/question/491373
#SPJ1
In a coffee cup calorimetry experiment, what data or information is needed to determine the enthalpy change for a reaction? Support your answer using any appropriate mathematical equation(s).
To determine the enthalpy change in a coffee cup calorimetry experiment, the following data or information is needed: initial and final temperatures (T1, T2), heat capacity of the calorimeter (Cp), and mass of the reaction mixture (m), and the equation used is ΔH = Cp * (T2 - T1) * m.
In a coffee cup calorimetry experiment, the following data or information is needed to determine the enthalpy change for a reaction:
The initial temperature of the reaction mixture (T1) and the final temperature after reaction (T2).
The heat capacity of the calorimeter, usually represented by "Cp".
The mass of the reaction mixture.
The equation used to calculate the enthalpy change (ΔH) in a coffee cup calorimetry experiment is given by:
ΔH = q = Cp * (T2 - T1) * m
where q is the heat gained or lost by the reaction mixture, m is the mass of the reaction mixture, Cp is the heat capacity of the calorimeter, T2 is the final temperature of the reaction mixture, and T1 is the initial temperature of the reaction mixture.
Learn more about enthalpy:
https://brainly.com/question/16994235
#SPJ4
the color change of a chemical indicator requires an overtitration of 0.02 ml. calculate the percent relative error if the total volume of titrant is 60.00 ml.
The relative error is calculated by taking the difference between the actual titration volume and the expected titration volume, dividing by the expected titration volume.
What is titration ?Titration is a laboratory process used to measure the precise concentration of a solution. It is a quantitative analytical technique that involves the controlled addition of a reagent (titrant) to a sample solution until a specific endpoint is reached. This endpoint is identified by a chemical reaction that signals that the titrant has been completely consumed. By measuring the amount of titrant added and the concentration of the sample solution, the concentration of the sample can be accurately determined.
And then multiplying by 100. In this case, the actual titration volume is 60.00 ml and the expected titration volume is 0.02 ml, so the relative error is Relative Error = (60.00 - 0.02) / 0.02 * 100 = 2,999,900% .This indicates that the titrant volume was too large by a factor of 2,999,900%. This large of a relative error indicates that something went wrong in the titration process and the titrant was added too quickly or in too large of an amount.
To learn more about titration
https://brainly.com/question/186765
#SPJ4
if the distance between a neutral atom and a point charge is quadrupled, by what factor does the force on the atom by the point charge change? express your answer as a number. (enter the ratio of the magnitudes of these forces
The force on the atom by the point charge will decrease by a factor of 16.
What is the atom ?An atom is the smallest unit of matter that can exist. Atoms are composed of protons, neutrons, and electrons, held together by electromagnetic forces. Protons and neutrons are located in the nucleus of the atom, while electrons orbit around the nucleus. Atoms can form molecules when they share electrons, allowing them to bond together. Atoms can also form ions when they gain or lose electrons, altering their electrical charge. All matter is made up of atoms, and atoms can combine to form many different substances. Even though atoms are very small, the structure of atoms is essential to understanding the properties of matter.
This is because the force between two point charges is inversely proportional to the square of the distance between them. Therefore, if the distance is quadrupled, the force will be reduced by a factor of 16 (= 4^2).
To learn more about the atom
https://brainly.com/question/26952570
#SPJ4
Which balance should be used to.
a. Weigh approximately 10g of NaCl
b. Weigh 10. 1 g of NaCl
To weigh approximately 10g of NaCl we can use triple beam balance and to
weigh 10. 1 g of NaCl we can use top loading balance.
Triple-Beam Balance Compared to a top-loading balance, this kind of laboratory balance is less sensitive. Due to the three decades of weights that glide along separately calibrated scales, these balances are known as triple-beam balances. Typically, the three decades are divided into 100g, 10g, and 1g graduations. These scales are appropriate for many weighing applications despite having substantially less readability. We can weigh 10 g with this balance
Top-Loading Balance Another balance that is mostly utilized in laboratories is this one. Typically, they can measure things weighing between 150 and 5000 g. Although they provide less readability than an analytical balance, they enable measurements to be made rapidly, making them a more practical option when precise readings are not required.
Additionally, top-loaders are less expensive than analytical balances. Modern electric top-loading balances provide a digital readout in
Learn more about balance at https://brainly.com/question/11334484
#SPJ4
can someone please help me answer this. thank you if you help!
The element with the given electronic configuration 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p¹ is indium.
The Lewis dot structure is shown in the attached image.
What is the electronic configuration of indium?The electronic configuration of indium can be written as 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p¹ or [Kr]4d¹⁰5p¹.
The atomic number of Indium is 49.
Chemically speaking, indium has the atomic number 49 and the symbol In. The most malleable metal that isn't an alkali metal is indium. It is a white or silvery metal with a tin-like look.
Learn more about indium at: https://brainly.com/question/13957948
#SPJ1
if 50.0 ml of a 0.10 f solution of fully protonated glycine (glycine hydrochloride) is titrated with 50.0 ml of 0.10 m naoh, what is the ph?
The pH of the solution when 50.0 mL of a 0.10 M solution of fully protonated glycine (glycine hydrochloride) is titrated with 50.0 mL of 0.10 M NaOH is approximately 8.72.
This is because NaOH is a strong base and will completely neutralize the glycine hydrochloride. To calculate the pH, we can use the equation pH = -log[H3O+], where [H3O+] is the concentration of the hydronium ions in the solution. In this case, the concentration of hydronium ions is equal to the concentration of the NaOH, which is 0.10 M. Taking the negative log of this gives us a pH of 8.72.
Learn more about ph of a solution:
https://brainly.com/question/26424076
#SPJ4