The change in enthalpy when 3 moles of methane react in excess oxygen is -2.67 × 10³ kJ (Option B).
What is enthalpy?Enthalpy (H) is a thermodynamic property that describes the total heat content of a system at a constant pressure. It is a measure of the energy that is transferred as heat during a chemical reaction or physical change at constant pressure.
Enthalpy is defined mathematically as:
H = U + PV
where U is the internal energy of the system, P is the pressure, and V is the volume. Enthalpy is often measured in units of Joules (J) or kilojoules (kJ).
The given reaction is:
CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l) ΔH = -890 kJ
This equation shows that when one mole of methane reacts with two moles of oxygen, it produces one mole of carbon dioxide and two moles of water while releasing 890 kJ of energy.
To determine the change in enthalpy when 3 moles of methane react in excess oxygen, we need to first calculate the amount of heat released when one mole of methane reacts with excess oxygen.
From the balanced chemical equation, we can see that 1 mole of CH4 releases 890 kJ of energy, so the energy released by 3 moles of CH4 would be 3 times that value:
Energy released by 3 moles of CH4 = 3 × (-890 kJ/mol) = -2670 kJ
To know more about internal energy, visit:
https://brainly.com/question/14668303
#SPJ1
The change in enthalpy when 3 moles of methane react in excess oxygen is -2670 kJ.
What is Enthalpy?
Enthalpy is a thermodynamic property of a system that describes the heat content of the system at constant pressure. It is denoted by the symbol "H" and is expressed in units of joules (J) or kilojoules (kJ). Enthalpy is a state function, which means that it depends only on the initial and final states of the system, not on the path taken to reach those states.
The given reaction is: CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), ΔH = −890 kJ
This reaction is for one mole of methane. To find the change in enthalpy when 3 moles of methane react, we need to multiply the enthalpy change by 3:
ΔH = 3 × (-890 kJ/mol) = -2670 kJ
Therefore, the change in enthalpy when 3 moles of methane react in excess oxygen is -2670 kJ.
Learn more about Enthalpy from given link
https://brainly.com/question/14047927
#SPJ1
PLSSSSSS HELPPPPP
1) Assuming the diameter of the circle represents a proton, calculate the relative distance of the electron from the proton in a hydrogen atom. Show your calculation in the space below.
2) Roll out a length of yarn to reflect the length you just calculated; this will illustrate the relative distance of the electron from the proton.
3)What can you conclude when comparing the size of the proton with the distance of the electron from the proton?
4)Measure the diameter of a pea with the metric ruler and record this value.
5)Assuming the diameter of the pea represents a proton, calculate the relative distance of the electron from the proton in a hydrogen atom.
6)What do you think lies between the proton and the electron in a hydrogen atom?
7)s the electron always in one spot in a hydrogen atom, or does its position change?
Answer: For 1 is The diameter of a proton is 1.75× 10-15lm. The Bohr radius — the most probable distance from the nucleus to the electron — is 5.29 ×10-11lm. The diameter of a hydrogen atom is therefore 2 × 5.29 ×10-11lm = 1.058 ×10-10lm.
______ is produced anytime current flows in a circuit, due to the collision between the flowing free electrons and the fixed atoms.
Heat is produced anytime current flows in a circuit, due to the collision between the flowing free electrons and the fixed atoms. When an electric current flows through a conductor, the free electrons move through the lattice of atoms.
As they move, they collide with the fixed atoms, causing the atoms to vibrate and transfer energy to neighboring atoms. This energy transfer increases the temperature of the conductor, resulting in the production of heat.
The amount of heat produced is directly proportional to the amount of current flowing through the conductor, the resistance of the conductor, and the time for which the current flows. This relationship is described by Joule's law, which states that the heat produced is equal to the product of the current, the resistance, and the time.
Mathematically, this can be expressed as H = I^2RT, where H is the heat produced, I is the current, R is the resistance, and T is the time. The collision between the flowing free electrons and the fixed atoms in a conductor leads to the production of heat, which is proportional to the current, resistance, and time for which the current flows.
To learn more about heat
https://brainly.com/question/30603212
#SPJ4
How many atoms of lithium are in 18.7 g?
The atoms of lithium that are in 18.7 g is 16 × 10²³ atoms . This is taken out by mole concept .
What is mole concept ?The mole is a unit of measurement similar to the pair, dozen, gross, and so on. It provides a precise count of the atoms or molecules in a bulk sample of matter. A mole is the amount of substance that contains the same number of discrete entities (atoms, molecules, ions, etc.)
if 7 grams of lithium contain 6 × 10²³ atoms
then 18.7 will contain 16 × 10²³ atoms
to know more about mole concept , visit ;
brainly.com/question/31123980
#SPJ1
Which of the following molecules would be most favorable to undergo an E2 reaction rather than an SN2 reaction with NaOH
2-bromopropane molecules would be most favorable to undergo an E2 reaction rather than an SN2 reaction with NaOH. Here option B is the correct answer.
An E2 reaction occurs when a strong base removes a proton from a beta-carbon adjacent to a leaving group, leading to the formation of a double bond and the departure of the leaving group. An SN2 reaction, on the other hand, involves a nucleophile attacking the carbon bearing the leaving group while the leaving group departs.
The relative favorability of E2 and SN2 reactions depends on the strength of the nucleophile and the base, the steric hindrance around the carbon bearing the leaving group, and the nature of the leaving group.
In this case, NaOH is a strong base, and the molecule that is most favorable to undergo an E2 reaction is the one with the least steric hindrance around the carbon bearing the leaving group, which is 2-bromopropane. The other molecules have more steric hindrance around the carbon bearing the leaving group, making them less favorable to undergo E2 reactions.
To learn more about bromopropane molecules
https://brainly.com/question/489491
#SPJ4
Complete question:
Which of the following molecules would be most favorable to undergo an E2 reaction rather than an SN2 reaction with NaOH?
a) 1-bromopropane
b) 2-bromopropane
c) 1-chloropropane
d) 2-chloropropane
I need help please anyone ?!!!?!
Answer:
answer A is the answer suii
Answer:
A
Explanation:
u put it down and let them pick it up themselves so if anything happens u are not to be blamed
why can't the enthalpy of formation of calcium carbonate be determined directly?
The enthalpy change can not be measured directly because you have to take into account how much energy was put into the reaction in the first place.
Hope this helps!!! :)
A liquid has a volume of 40,0 mL and a mass of 45,0 g. Calculate the specific gravity of the liquid
The specific gravity of the liquid is 1.125.
What is the specific gravity of the liquid?The specific gravity of a substance is the ratio of its density to the density of water at a particular temperature.
Therefore, we need to calculate the density of the liquid and compare it to the density of water at the same temperature.
The formula for density is:
density = mass/volume
density of the liquid = 45.0 g / 40.0 mL = 1.125 g/mL
At 4 °C, the density of water is 1.000 g/mL.
Therefore, the specific gravity of the liquid is:
specific gravity = density of liquid / density of water = 1.125 g/mL / 1.000 g/mL = 1.125
Learn more about specific gravity here: https://brainly.com/question/543765
#SPJ1
15. At normal temperatures, which of the following substances can be classified as a
fluid?
A oxygen
B marble
C silver
The substance that can be classified as a fluid at normal temperatures is oxygen (3). Fluid refers to any substance that can flow. All gaseous and liquid materials are classified as fluids.
What are fluids ?A substance capable of continuously flowing and deforming under shared stress. Fluids are a subset of matter's phases that include liquids and gases. Fluids are substances that deform continuously when subjected to external force. These are the substances that cannot withstand shear force (the force that causes a change in shape) when applied to them. Air, water, toothpaste, molten lava, and so on. A fluid flows as a result of force or pressure.
What are properties of fluid ?Density-The density of a fluid is its mass per unit volume. It is the mathematical ratio of the fluids' mass to volume.
The weight of fluids per unit volume is known as specific weight. It is the mathematical ratio of the fluids' weight to volume.
Specific gravity is defined as the ratio of fluid specific weight or mass density to standard fluid specific weight or mass density. Fluids in the case of liquid standards are water, whereas fluids in the case of gases standards are air.
The resistance provided by a layer of fluids when it moves over another layer of fluids is referred to as its viscosity.
Surface tension is a tensile force that acts on the surface of a body.
to know more about fluids , visit;
brainly.com/question/28390523
#SPJ1
Classify each of the following as an exothermic or endothermic reaction. Drag the appropriate statements to their respective bins. Reset Help The energy level of the reactants is lower than that of the products. The combustion of wood provides energy A reaction releases 101 J. Exothermic Endothermic Submit Request Answer
1. The energy level of the reactants is lower than that of the products. - Endothermic
2. The combustion of wood provides energy - Exothermic
3. A reaction releases 101 J. - Exothermic
What is an Endothermic?
An endothermic process or reaction is a chemical or physical process that absorbs heat from the surroundings. In an endothermic process, energy is required to break the bonds in the reactants and form new bonds in the products. As a result, the temperature of the surroundings decreases, and the process feels cold to the touch. Examples of endothermic processes include melting ice, cooking an egg, and evaporating water.
What is an Exothermic?
An exothermic process or reaction is a chemical or physical process that releases heat into the surroundings. In an exothermic process, energy is released as the bonds in the reactants are broken and new bonds are formed in the products. As a result, the temperature of the surroundings increases, and the process feels warm to the touch. Examples of exothermic processes include burning a candle, combustion reactions, and the reaction between baking soda and vinegar.
To know more about Endothermic, visit:
https://brainly.com/question/23184814
#SPJ1
Gaseous ethane (CH3CH3) reacts with gaseous oxygen gas (0₂) to produce gaseous carbon dioxide (CO₂) and gaseous water (H₂O). If 69.7 g of carbon
dioxide is produced from the reaction of 26.76 g of ethane and 169.4 g of oxygen gas, calculate the percent yield of carbon dioxide.
Round your answer to 3 significant figures.
Answer:
The balanced chemical equation for the reaction is:
C2H6 + 3O2 → 2CO2 + 3H2O
To calculate the theoretical yield of CO2, we need to use the given amount of ethane and oxygen gas to determine which reactant is limiting, and then use stoichiometry to calculate the amount of CO2 that should be produced.
First, we need to calculate the number of moles of ethane and oxygen gas used in the reaction:
moles of ethane = 26.76 g / 30.07 g/mol = 0.8908 mol
moles of oxygen gas = 169.4 g / 32.00 g/mol = 5.304 mol
Next, we need to determine which reactant is limiting by comparing the number of moles of each reactant to their stoichiometric coefficients in the balanced equation. The stoichiometric ratio of ethane to oxygen gas is 1:3, so every one mole of ethane requires three moles of oxygen gas. Therefore, the limiting reactant is ethane, because there are only 0.8908 moles of it, whereas there are 5.304 moles of oxygen gas.
Using the stoichiometry of the balanced equation, we can calculate the theoretical yield of CO2:
moles of CO2 = moles of ethane × (2 moles of CO2 / 1 mole of C2H6) = 0.8908 mol × 2 = 1.7816 mol
mass of CO2 = moles of CO2 × molar mass of CO2 = 1.7816 mol × 44.01 g/mol = 78.5 g
Now, we can calculate the percent yield of CO2:
percent yield = (actual yield / theoretical yield) × 100%
actual yield = 69.7 g
percent yield = (69.7 g / 78.5 g) × 100% = 88.7%
Therefore, the percent yield of CO2 is 88.7%.
true or false the water cycle affects weather
Answer:
true
The water cycle affects the weather and climate of a particular region in multiple ways
Account for the fact that neither of the following compounds undergoes a Dieis- Alder reaction with maleic anhydride. -on, CH
These compounds X and Y do not undergo a Diels-Alder reaction with maleic anhydride.
The Diels-Alder reaction is a type of reaction in which two molecules react to form a larger, more complex molecule. In this reaction, one molecule must contain a double bond and the other must contain two or more electron-withdrawing groups (EWGs). The EWGs provide electron density to the double bond, allowing it to react. The double bond must also be a conjugated system, meaning it must consist of alternating single and double bonds.
Neither of the compounds X and Y undergoes a Diels-Alder reaction with maleic anhydride. The given information can be best explained by considering the molecular structure of the two compounds X and Y. Diels-Alder reaction is a chemical reaction that forms a cyclohexene ring by reacting a conjugated diene with a substituted alkene or alkyne.
Maleic anhydride is a cyclic dicarboxylic acid anhydride with a molecular formula of C4H2O3. It is a colorless or white crystalline solid with a pungent odor.
In the case of both compounds (X and Y) provided, neither contains a double bond nor a conjugated system. Without a double bond, the reaction does not occur. Without an EWG, the reaction does not occur. Therefore, these compounds do not undergo a Diels-Alder reaction with maleic anhydride.
For more such questions on Diels-Alder reaction , Visit:
https://brainly.com/question/30474400
#SPJ11
Draw the lewis structure for NO2- including any valid resonance structures. which of the following statements are true?
a. the nitrite ion contains 2 N-O bonds that are equivalent to 1 1/2 bonds.
b. the nitrite ion contains 2 N=O double bonds
c. the nitrite ion contains 1 N-O single bond and one N=O double bond
d. the nitrite ion contains 2 N-O single bonds
the answer is A, but I don't understand why
The Lewis structure for NO₂⁻ is found in the attachment.
The correct statement is the nitrite ion contains 1 N-O single bond and one N=O double bond. The correct option is C.
Which of the given statements is true?This is because the nitrite ion (NO2-) has a resonance structure in which the double bond can move between the two oxygen atoms.
This means that the nitrite ion has a partial double bond character, where one bond is a single bond between nitrogen and one of the oxygen atoms (N-O) and the other bond is a double bond between nitrogen and the other oxygen atom (N=O).
Therefore, statement (a) is not true, as the two N-O bonds in the nitrite ion are not equivalent to 1 1/2 bonds. Statement (b) is not true, as there is only one N=O double bond in the nitrite ion. Statement (d) is not true, as there is only one N-O single bond in the nitrite ion.
Learn more about the nitrite ion at: https://brainly.com/question/29957865
#SPJ1
The enthalpy of vaporization for methanol is 35.2 kJ/mol. Methanol has a vapor pressure of 1 atm at 64.7 oC. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 31.9 oC? Give your answer in atmospheres, to the third decimal point.
Using the Clausius-Clapeyron equation, the pressure can be obtained as 3.86 atm
What is the Clausius-Clapeyron equation?The Clausius-Clapeyron equation is an important thermodynamic equation that relates the vapor pressure of a liquid to its temperature and enthalpy of vaporization
The Clausius-Clapeyron equation describes how the vapor pressure of a liquid changes as a function of temperature, and how it is related to the enthalpy of vaporization of the liquid. This equation is particularly useful in understanding the behavior of substances at different temperatures and pressures, and is often used in thermodynamic calculations related to phase transitions and chemical reactions involving liquids and gases.
We know that;
ln(P2/P1) = ΔH/R (1/T2 - 1/T1)
ln(P2/1) = 35.2 * 10^3/8.314 (1/304.9 - 1/337.7)
ln(P2/1) = 35.2 * 10^3/8.314 (3.28 - 2.96) * 10^-3
P2/1 = e^1.35
P2 = 1 * e^1.35
P2 = 3.86 atm
Learn more about Clausius-Clapeyron equation:https://brainly.com/question/13162576
#SPJ1
molarity of a solution that contains 29.4 grams of NaCl in 250 ml of water?
Answer:
2.16 M
Explanation:
The molarity of the solution is 2.16 M. To calculate the molarity, you need to first determine the number of moles: 29.4 grams of NaCl is equal to 0.737 moles. Then, divide the number of moles, 0.737, by the volume of the solution, which is 250 mL. Multiplying the result by 1000 gives the molarity, which is 2.16 M.
yw
Select the correct IUPAC name and the common name for a carboxylic acid having a structural formula of CH3-CC View Available Hint(s) propanoic acid, propionic acid 0 methanoic acid, formic acid eethanoic acid acetic acid o ethanoic acid, formic acid
The correct IUPAC name for the carboxylic acid having a structural formula of CH3-CC is ethanoic acid, and its common name is propionic acid.
The correct IUPAC name and the common name for a carboxylic acid having a structural formula of CH3-CC is propanoic acid and propionic acid. Carboxylic acid is a group of organic compounds in which a carboxyl functional group (-COOH) is linked to a hydrocarbon chain. In carboxylic acids, the carbon atom of the carboxyl group is sp2 hybridized, with the remaining p orbital on the carbonyl carbon interacting with a neighboring O atom, allowing for the delocalization of the electron pair on the C=O bond. The carboxyl functional group is composed of a carbonyl group and a hydroxyl group.
The prefix for the group -COOH is carboxy-.The structural formula of CH3-CC:
To determine the IUPAC name and common name of the carboxylic acid with this structural formula, the steps below should be followed:
Propanoic acid is the IUPAC name for CH3-CC carboxylic acid. Propionic acid is the common name for CH3-CC carboxylic acid.
Therefore, the correct IUPAC name and the common name for a carboxylic acid having a structural formula of CH3-CC is propanoic acid and propionic acid.
For more such questions on IUPAC name , Visit:
https://brainly.com/question/28872356
#SPJ11
17 points The Art Forger Who Tricked the Nazis
Where did the trial take place? What was the defendant accused of?
What was strange about his defense?
How did Han van Meegeren manage to forge the works of art so well? What did he do to make them look authentic?
How could forensic testing have changed this case?
What ultimately happened to van Meegeren?
Money to Run, But No Skills to Hide
How did Schrenker try to fake his own death? How did he get caught?
Why is creating a new state ID harder to do these days?
Why is it so difficult to fake a passport? What is the easiest way for criminals to obtain a passport?
Why does Mr. Abagnale claim it is easy to get a fraudulent passport? What steps does someone have to take to make this happen?
Why was Mr. Abagnale arrested? What happened to him after his arrest?
Answer:
but I have a great day to be a good day for a new post it on your own life to be the
DNA is said to be the organism's genetic fingerprint. What does it mean? Give one application of this concept
Answer:
DNA is an organism's genetic fingerprint because it contains unique genetic information that determines its development, function, and reproduction. This unique DNA sequence can be used for identification purposes, such as establishing paternity or maternity, identifying suspects in criminal investigations, and identifying remains in forensic investigations. The field of forensic science uses DNA analysis to compare DNA profiles from crime scenes to those of potential suspects, resulting in the conviction of many criminals who would have otherwise gone unpunished.
(NH4)2S is a strong electrolyte. Determine the concentration of each of the individual ions in a 0.550 M (NH4)2S solution.
The concentration of each of the individual ions of the strong electrolyte in a 0.550 M (NH4)2S solution is 0.1100M and 0.550M. (NH4)2 S is a strong electrolyte as it completely dissociates into NH4+ and S2- ions.
A strong electrolyte is known as a solution or solute that completely or almost completely, ionizes or dissociates in a solution. These electrolytes are good conductors of electric current in the solution. Strong electrolyte is defined as a chemical in aqueous solution which is a good conductor of electricity. The term is also known as molar concentration. Molar concentration of a solution is defined as the number of moles of solute dissolved in one liter of solution. In order to calculate the molarity of a solution we have to divide the moles of solute by the volume of the solution expressed in liters.
So, (NH4)2S as strong electrolyte with complete dissociation, have the amount of molarity added times the number of moles of each compound:
NH4+ = 2 x (.550M) = .1100M
S2- = .550M
So the concentrations are determined are .1100M and .550M.
To learn more about Strong electrolyte
https://brainly.com/question/2285692
#SPJ4
For a certain series of reactions, if [OH−][HCO−3]/[CO2−3]=K1 and [OH−][H2CO3]/[HCO−3]=K2, what is the equilibrium constant expression for the overall reaction? Write the overall equilibrium equation.
Answer:
Explanation:
The overall equilibrium equation can be obtained by combining the two given equations:
H2CO3 + OH- → HCO3- + H2O (1)
HCO3- + OH- → CO32- + H2O (2)
Adding equations (1) and (2), we get:
H2CO3 + 2OH- → CO32- + 2H2O
Dividing the second equation by the first, we get:
[CO32-][H2O]/[HCO3-] = K2
Multiplying the above equation with the first equation, we get:
[H2CO3][CO32-][H2O]^2/[HCO3-] = K1*K2
Thus, the equilibrium constant expression for the overall reaction is:
[K] = [H2CO3][CO32-][H2O]^2/[HCO3-]
where [K] = K1*K2.
How does a phase change affect a thermochemical equation?
O It alters the products.
O It alters the moles of reactants.
O It affects the balance of the equation.
O It can affect the AH value.
The correct answer is option D, It can affect the AH value.
What is a phase change?A phase change is a physical change in a substance in which the substance's state of matter is changed, such as from a gas to a liquid or from a liquid to a solid. It is also known as a phase transition.
Phase changes also involve changes in energy, temperature, and pressure. For example, when a solid melts to become a liquid, it absorbs energy and the temperature rises. When a liquid boils to become a gas, energy is released and the temperature decreases. Similarly, when a gas condenses to become a liquid, energy is released and the pressure increases.
Learn more about phase change here:
https://brainly.com/question/25664350
#SPJ1
if you have the following reaction, how many moles of water are made for each mole of acetic acid used?g
When we have the following balanced reaction, CH₃COOH + NaOH → CH₃COONa + H₂O, one mole of water is formed for each mole of acetic acid used.
Generally, we can define, Stoichiometry as the calculation of products and reactants in a chemical reaction. It is basically related with numbers. Mole ratio, is common type of stoichiometric relation, which relates the amounts in moles of any two substances in chemical reaction.
We have a balanced chemical reaction, CH₃COOH + NaOH → CH₃COONa + H₂O, where, acetic acid reacts with sodium hydroxide and water molecules formed with Sodium acetate. Now, we have to determine the moles of water are formed for each mole of acetic acid used.
Using the stoichiometry concept, one mole of acetic acid reacts with one mole of sodium hydroxide forming one mole of water and one mole of Sodium acetate. Therefore, one mole of water is formed for each mole of acetic acid used.
For more information about Stoichiometry, visit :
https://brainly.com/question/29007372
#SPJ4
Complete question:
if you have the following reaction,
CH₃COOH + NaOH ==> CH₃COONa + H₂O, how many moles of water are made for each mole of acetic acid used?
Help me please very confused?
Answer:
Your answer is on the attached image. I hope this helps!
Consider marking Brainliest!
The air trapped inside a 240 mL glass bottle has a pressure of 1.0 atm and a temperature of 25.0 °C. You put the glass bottle into a freezer. After several hours, the air trapped inside the bottle has a temperature of -35.0 °C and a pressure of 0.80 atm. Determine the value of k for the air trapped inside the glass bottle before and after cooling to show that P equals kT.
The value of k for the air trapped inside the glass bottle before and after cooling is 0.2021, thus proving that P equals kT.
The air trapped inside a 240 mL glass bottle has a pressure of 1.0 atm and a temperature of 25.0 °C. To determine the value of k for the air trapped inside the glass bottle before and after cooling to show that P equals kT, we need to use the ideal gas law equation, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature. When the bottle is put into the freezer, the temperature decreases from 25.0 °C to -35.0 °C and the pressure decreases from 1.0 atm to 0.80 atm. Therefore, we can calculate the value of k by plugging in the values of pressure and temperature into the equation: PV = nRT. By rearranging the equation and solving for k, we find that k = PV/nRT. Plugging in the values, we get k = (1.0 atm x 240 mL) / (n x 0.0821 atm•L/mol•K x (25.0°C - (-35.0°C)) = 0.2021. This means that the value of k for the air trapped inside the glass bottle before and after cooling is 0.2021, thus proving that P equals kT.
For more such questions on cooling
https://brainly.com/question/17282820
#SPJ11
If only 1600 grams of CO2 are produced, what is the percent error of this reaction?
Answer:
Take 1600grams divide by 2
which substance would shatter when hit with a hammer? steel, bronze, table salt, copper
Answer:
Table salt.
Explanation:
Table salt would shatter when hit with a hammer.
Write the electron configuration for:
Cs+
Mg2+
Te2-
Cl-
(Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)
The electron configuration of Cs⁺ is [Xe].
The electron configuration of Mg²⁺ is [Ne].
The electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.
The electron configuration of Cl⁻ is [Ne]3s²3p⁶.
What is the electron configuration of the ions?Cs⁺: The Cs⁺ ion has lost one electron from the neutral Cs atom, which has an electron configuration of [Xe]6s¹. Therefore, the electron configuration of Cs⁺ is [Xe].
Mg²⁺: The Mg²⁺ ion has lost two electrons from the neutral Mg atom, which has an electron configuration of [Ne]3s². Therefore, the electron configuration of Mg²⁺ is [Ne].
Te²⁻: The Te²⁻ ion has gained two electrons compared to the neutral Te atom, which has an electron configuration of [Kr]5s²4d¹⁰5p⁴. Therefore, the electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.
Cl⁻: The Cl⁻ ion has gained one electron compared to the neutral Cl atom, which has an electron configuration of [Ne]3s²3p⁵. Therefore, the electron configuration of Cl⁻ is [Ne]3s²3p⁶.
Learn more about electron configuration here: https://brainly.com/question/11316046
#SPJ1
For an Alumina (Al2O3) specimen having a Fracture Toughness (KIC) of 3.4 MPa-m1/2, an applied load of 0.125 GPa, what is the maximum internal flaw (Y=1):
The term Fractured Toughness is defined as the plane strain fracture toughness. This is expressed as KIC.
KIC stands for Fractured Toughness which is defined as a measure of the resistance of a material to crack extension under predominantly linear-elastic conditions that is low toughness conditions when there is little to no plastic deformation occurring at the crack tip. KIC is considered as the lower limiting value of fracture toughness in the environment and at the speed and temperature of the test and can be considered as a size-independent fracture parameter for brittle materials. There is no advance assurance that a valid fractured toughness value will be determined from a particular test of the specimen.
To learn more about Fractured Toughness
https://brainly.com/question/24060161
#SPJ4
The principle of polymers. polymers clearly plan an important role in the molecular economy of the cell. for each statement below, state why it is false and change it to a correct description.
a. polymers are assembled from monomers in an extracellular compartment and are transported into the cell when required.
b. polysaccharides are one of the three main macromolecular polymers in the cell. a polysaccharide molecule contains a number of different monomers, which gives rise to millions of polysaccharide sequences.
Polysaccharides are a type of carbohydrate polymer composed of repeating units of monosaccharides. They are not one of the three main types of macromolecular polymers in the cell.
The reason for false statement are as following :-
a. The statement is false because polymers are assembled from monomers within the cell, not in an extracellular compartment. Cells have the ability to synthesize a variety of polymers, including nucleic acids, proteins, and carbohydrates, to perform specific functions within the cell. The assembly of polymers from monomers is an energy-intensive process that requires enzymes and specific conditions, such as the appropriate temperature and pH level. Therefore, the synthesis of polymers typically occurs within the cell.
A correct description would be: Polymers are assembled from monomers within the cell, and the synthesis of polymers is an energy-intensive process that requires enzymes and specific conditions.
b. The statement is false because polysaccharides are not one of the three main macromolecular polymers in the cell. The three main types of macromolecular polymers in the cell are nucleic acids, proteins, and carbohydrates. Polysaccharides are a type of carbohydrate polymer, but they are not one of the three main types of macromolecular polymers. Polysaccharides are composed of repeating units of monosaccharides, which gives rise to a limited number of polysaccharide sequences.
A correct description would be: Polysaccharides are a type of carbohydrate polymer composed of repeating units of monosaccharides. They are not one of the three main types of macromolecular polymers in the cell.
To know more about polymers, visit:-
https://brainly.com/question/1602388
#SPJ1
How Scandium affects the government
bababoy jijijijajdiwhrjfofhebdlodvebfif