Consider the following equation in chemical equilibrium. C2H4(g) H2(g) C2H6(g) 137 kJ What happens to the amount of ethane (C2H6) when the temperature of the system is increased

The pH of the weak acid solution before titration is 3.39. After the addition of 30.0 mL of 0.133 M KOH, the pH of the solution is 6.25, and after the addition of 75.0 mL of KOH, the pH of the solution is 6.80.

The steps for each part of the question:

1. Calculate the initial concentration of [H⁺] ions before any base has been added:

[H+] = sqrt(Ka x [HA]) = sqrt(4.2 x 10⁻⁷ x 0.317) = 4.06 x 10⁻⁴ M

pH = -log[H⁺] = -log(4.06 x 10⁻⁴) = 3.39

2. After 30.0 mL of KOH have been added, the number of moles of KOH is:

moles of KOH = Molarity x Volume = 0.400 x 0.0300 = 0.0120 moles

moles of HA remaining = initial moles - moles of KOH added = (0.317 x 0.0600) - 0.0120 = 0.01602 moles

moles of A⁻ formed = moles of KOH added = 0.0120 moles

Concentration of A⁻ = moles of A-/total volume = (0.0120/0.0900) = 0.133 M

Concentration of HA = (0.01602/0.0900) = 0.178 M

Ka = [H⁺][A⁻]/[HA]

[H+] = Ka x [HA]/[A⁻] = 4.2 x 10⁻⁷ x (0.178)/(0.133) = 5.60 x 10⁻⁷ M

pH = -log[H⁺] = -log(5.60 x 10⁻⁷) = 6.25

3. After 75.0 mL of KOH have been added, the number of moles of KOH is:

moles of KOH = Molarity x Volume = 0.400 x 0.0750 = 0.0300 moles

moles of HA remaining = initial moles - moles of KOH added = (0.317 x 0.0600) - 0.0300 = 0.01142 moles

moles of A- formed = moles of KOH added = 0.0300 moles

Concentration of A- = moles of A-/total volume = (0.0300/0.135) = 0.222 M

Concentration of HA = (0.01142/0.135) = 0.0846 M

Ka = [H⁺][A⁻]/[HA]

[H+] = Ka x [HA]/[A⁻] = 4.2 x 10⁻⁷ x (0.0846)/(0.222) = 1.60 x 10⁻⁷ M

pH = -log[H⁺] = -log(1.60 x 10⁻⁷) = 6.80

To know more about the KOH refer here :

https://brainly.com/question/7949561#

#SPJ11

Complex 2, [Co(NH₃)₃Cl₃]⁺², can have geometric isomers. This is because it has three Cl ligands that can occupy either a cis or trans configuration relative to each other. Complex 1, [Co(NH₃)₅SCN]⁺², cannot have geometric isomers because the SCN ligand is a monodentate ligand and can only occupy one position in the complex. Complex 3, CoClBr⋅5NH₃, cannot have geometric isomers because it only has one type of ligand.

Complex 1, [Co(NH₃)₅SCN]⁺², cannot have linkage isomers because it does not have any ambidentate ligands that can coordinate to the metal ion through different atoms. Complex 2, [Co(NH₃)₃Cl₃}⁺², and Complex 3, CoClBr⋅5NH3, can have linkage isomers because they have Cl and Br ligands that are ambidentate and can coordinate to the metal ion through different atoms.
Complex 1, [Co(NH₃)₅SCN]⁺², cannot have optical isomers because it has a plane of symmetry that bisects the complex. Complex 2, [Co(NH₃)₃Cl₃]⁺², and Complex 3, CoClBr⋅5NH₃, can have optical isomers because they do not have a plane of symmetry.
Complex 1, [Co(NH₃)₅SCN]⁺², cannot have coordination-sphere isomers because it only has one type of ligand. Complex 2, [Co(NH₃)₃Cl3]⁺², can have coordination-sphere isomers because it has two types of ligands. Complex 3, CoClBr⋅5NH3, can have coordination-sphere isomers because it has two different types of halogen ligands.

Learn more about ligands here:

https://brainly.com/question/2980623

#SPJ11

Answer:

0.64A

Explanation:

There is a well-known relationship between the bond length of a diatomic molecule and the atomic radius of its constituent atoms, known as the covalent radius. Specifically, the covalent radius of an atom is half the bond length between two identical atoms in a diatomic molecule.

Therefore, to determine the atomic radius of chlorine (Cl), we can use the bond length of fluorine (F2) and the fact that the two atoms in F2 are identical.

Since the bond length of F2 is given as 1.28 A, the covalent radius of fluorine is 1.28/2 = 0.64 A.

Since both fluorine and chlorine are halogens, they have similar electronic configurations and form similar covalent bonds. Therefore, we can use the covalent radius of fluorine as an estimate for the covalent radius of chlorine.

Thus, the atomic radius of chlorine is approximately 0.64 A

The mechanism of the polymerization reaction, more precisely the characteristics of the monomer and the reaction circumstances, can be used to explain why phenyl groups in linear polystyrene are bonded to alternate, not neighbouring, carbons of the polymer chain.

Styrene (C8H8), a vinyl monomer, is used in the polymerization step that creates polystyrene. A free radical initiator is often employed to start the reaction and spread the growth of the polymer chain in a conventional free radical mechanism. Each styrene monomer's vinyl group (CH=CH2) adds to the vinyl group of another styrene monomer throughout the polymerization process. As a result, a linear chain of repeating units connected by covalent bonds is created. The vinyl group of the styrene monomer is joined to the phenyl group (C6H5) in the case of polystyrene. As a result, during the polymerization process, the phenyl group is absorbed into the polymer chain. The phenyl groups in the polystyrene chain are situated at alternate carbons because they are joined to the vinyl group, which is situated at a different carbon in the styrene monomer. This is due to the head-to-tail nature of the polymerization reaction, in which the vinyl group of one monomer combines with the vinyl group of another monomer in a way that causes the phenyl groups to be arranged along the polymer chain in an alternating pattern. Consequently, in linear polystyrene, the location of the phenyl groups is a result of the styrene monomer's makeup and the polymerization reaction's process.

For more such questions on polymerization

https://brainly.com/question/28763804

#SPJ11

The missing particle in the radioactive decay problem is an alpha particle (2He4). This can be determined by balancing the mass numbers and atomic numbers on both sides of the equation.

In radioactive decay, an unstable atom loses energy by emitting radiation. This radiation can be in the form of alpha particles, beta particles, or gamma rays. Alpha particles are the most massive type of radiation, and they are made up of two protons and two neutrons. Beta particles are less massive than alpha particles, and they are made up of an electron. Gamma rays are the least massive type of radiation, and they are high-energy photons.

In the given problem, the mass number of the polonium atom is 210, and the atomic number is 84. The mass number of the lead atom is 206, and the atomic number is 82. This means that two protons and two neutrons have been lost in the decay process. The only type of radiation that can carry away this much mass is an alpha particle.

Therefore, the missing particle in the radioactive decay problem is an alpha particle (2He4).

To learn more about radioactive decay problem click here : brainly.com/question/16945017

#SPJ11

In H2O, the hydrogen atom donates its electron to the oxygen atom, which has a higher electronegativity, resulting in the formation of an ionic bond.

Hydrogen typically does not form an ionic bond as a proton, as it only has one electron to donate and form a bond with. However, in certain circumstances, hydrogen can form an ionic bond when it donates its electron to a more electronegative element, such as oxygen or fluorine. In the given compounds, H2O is the only compound where hydrogen forms an ionic bond as a proton. In H2O, the hydrogen atom donates its electron to the oxygen atom, which has a higher electronegativity, resulting in the formation of an ionic bond. Acetic acid (CH3COOH) and ethanol (CH3CH2OH) both contain covalent bonds, where electrons are shared between atoms.
Ionic bonds are formed when electrons are transferred from one atom to another, resulting in the formation of positively and negatively charged ions that attract each other. Hydrogen typically does not form an ionic bond as a proton, as it only has one electron to donate and form a bond with. However, in some cases, hydrogen can form an ionic bond by donating its electron to a more electronegative element. For example, in the compound H2O (water), the hydrogen atom donates its electron to the oxygen atom, which has a higher electronegativity, resulting in the formation of an ionic bond. This is because oxygen attracts electrons more strongly than hydrogen does, creating an electrostatic attraction between the two atoms. Acetic acid (CH3COOH) and ethanol (CH3CH2OH) both contain covalent bonds, where electrons are shared between atoms. Covalent bonds occur when two atoms share electrons to satisfy their valence shell electron requirements. Overall, hydrogen usually forms covalent bonds rather than ionic bonds.

To know more about Ionic bond visit:

https://brainly.com/question/11527546

#SPJ11

The [OH-] in the 8.2×10^-2 M KOH solution which is a strong base, is 8.2×10^-2 M.

To calculate the [OH-] for the strong base solution with a concentration of 8.2×10^-2 M KOH, follow these steps:

1. Identify the base: In this case, the base is KOH (potassium hydroxide), a strong base that completely dissociates in water.

2. Write the dissociation equation: When KOH dissociates in water, it forms potassium ions (K+) and hydroxide ions (OH-). The equation is:
  KOH → K+ + OH-

3. Determine the concentration of OH-: Since KOH is a strong base and completely dissociates, the concentration of OH- ions in the solution will be equal to the concentration of KOH.

In this case, the concentration of KOH is given as 8.2×10^-2 M, so the concentration of OH- ions in the solution will also be 8.2×10^-2 M.

Learn more about base at: https://brainly.com/question/15638606

#SPJ11

The pH of natural rainwater at 25°C in equilibrium with CO2 at an atmospheric concentration of 380 ppm is approximately 5.62.

The pH of natural rainwater at 25°C in equilibrium with CO2 at an atmospheric concentration of 380 ppm can be calculated using the equilibrium reactions involving carbon dioxide.

One significant reaction is the equilibrium between carbonic acid (H2CO3) and bicarbonate ion (HCO3-), as represented by the equation H2CO3 + HCO3- ⇌ H+ + HCO3-.

The Henry's Law constants and the given CO2 concentration provide the necessary information to determine the concentration of H+ ions, which is related to the pH. By applying the equilibrium constant expression and solving for the H+ concentration, we can convert it to pH. In this case, the resulting pH of the rainwater is approximately 5.62.

The pH of rainwater is an important parameter as it indicates the acidity or alkalinity of the water and helps evaluate its environmental impact and potential effects on ecosystems.

Learn more about  equilibrium

brainly.com/question/30694482

#SPJ11

The molar solubility of Co(OH)₂ in a solution buffered at pH 12.30 is 2.33x10⁻⁶ M.

(b) The molar solubility of Co(OH)₂ in the buffered solution is about 28 times less than the solubility in pure water.

The solubility of Co(OH)2 in a solution buffered at pH 12.30 can be calculated by considering the equilibrium between the solid and dissolved forms of the compound:

Co(OH)₂(s) ⇌ Co₂+(aq) + 2OH⁻(aq)

At pH 12.30, the hydroxide ion concentration [OH⁻] can be calculated from the following equation:

pH = pKw - pOH

where pKw = 14.00 is the ion product constant of water. Thus:

12.30 = 14.00 - pOH

pOH = 1.70

[OH⁻] = 10^(-pOH) = 0.01995 M

The solubility product expression for Co(OH)₂ can be written as:

Ksp = [Co²⁺][OH⁻]²

At equilibrium, the molar solubility of Co(OH)₂ is equal to [Co²⁺], since the hydroxide ion concentration is much larger than the concentration of Co2+ ions produced by the dissolution of the solid. Therefore:

Ksp = [Co²⁺][OH⁻]² = x*(2x)² = 4x³

where x is the molar solubility of Co(OH)₂ in mol/L. Substituting the value of Ksp gives:

1.3x10⁻¹⁵ = 4x³

x = 2.33x10⁻⁶ M

Therefore, the molar solubility of Co(OH)₂ in a solution buffered at pH 12.30 is 2.33x10⁻⁶ M.

(b) To compare the solubility in the buffered solution to that in pure water, we can calculate the solubility product in pure water using the ionic product of water (Kw = 1.0x10⁻¹⁴):

Co(OH)₂(s) ⇌ Co²⁺(aq) + 2OH⁻(aq)

Ksp = [Co²⁺][OH⁻]² = x*(2x)² = 4x³

Kw = [H⁺][OH⁻] = (x)(2x) = 2x²

Ksp/Kw = 2x

x = (Ksp/Kw)/2 = (1.3x10⁻¹⁵)/(1.0x10⁻¹⁴)/2 = 0.065 M

Therefore, the molar solubility of Co(OH)₂ in the buffered solution is about 28 times less than the solubility in pure water.

To know more about molar solubility, refer to the link below:

https://brainly.com/question/28170449#

#SPJ11

We would need approximately 36 iron tablets and 6.25 cm3 of 0.002 mol dm-3 KMnO4 solution for the titration experiment.

To determine the number of iron tablets required in the 250 cm stock solution, we need to first calculate the mass of Fe2+ ions in the solution.
Assuming that 1 tablet contains 14.0 mg of Fe2+, we can calculate the mass of Fe2+ ions in 250 cm stock solution as follows:
Number of tablets = (mass of Fe2+ ions in 250 cm stock solution) / (mass of Fe2+ ions per tablet)
Number of tablets = (250 cm x 0.001 mol/cm3 x 2 x 55.845 g/mol) / (14.0 mg)
Number of tablets = 500 / 14
Number of tablets = 35.7
Therefore, we would need to dissolve approximately 36 iron tablets in the 250 cm stock solution.
For the titration experiment, we need to determine the amount of Fe2+ ions and MnO4 ions involved. The table is missing some values, but based on the given information, we can fill it in as follows:
Mass (mg) of Fe2+ ions (in 25 cm) = 14.0 mg x (250 cm / 25 cm) = 140.0 mg
Amount (mmol) of Fe2+ ions (in 25 cm) = 0.140 g / 55.845 g/mol = 0.0025 mol
Amount (mmol) of MnO4 ions = 5 x (amount of Fe2+ ions) = 0.0125 mol
Concentration (mol dm) of KMnO4 solution = 0.002 mol dm-3 (given)
Volume (cm3) of KMnO4 solution (mean titre values) = (amount of MnO4 ions) / (concentration of KMnO4 solution) = 6.25 cm3
Therefore, we would need approximately 36 iron tablets and 6.25 cm3 of 0.002 mol dm-3 KMnO4 solution for the titration experiment.

To know more about titration visit :

https://brainly.com/question/29276192

#SPJ11

The enthalpy changes for the given reactions are:
-150 kJ for 3 A --> 3 B
-20 kJ for C --> B
70 kJ for A --> C
-10 kJ for A + C --> 2 B.

To calculate the enthalpy changes for the given reactions, we need to use Hess's Law, which states that the enthalpy change for a chemical reaction is independent of the pathway between the initial and final states of the system. In other words, the total enthalpy change is the same whether the reaction occurs in one step or in several steps.

1. 3 A --> 3 B:
Since the enthalpy change for A --> B is -50 kJ, the enthalpy change for 3 A --> 3 B is -150 kJ. This is because the enthalpy change is directly proportional to the amount of reactant or product.

2. C --> B:
The enthalpy change for B --> C is 20 kJ, so the enthalpy change for C --> B is -20 kJ. This is because the reverse reaction has the opposite sign of the enthalpy change.

3. A --> C:
To calculate the enthalpy change for A --> C, we can use the enthalpy changes for A --> B and B --> C. We need to reverse the sign of the enthalpy change for B --> C and add it to the enthalpy change for A --> B.
A --> C = (20 kJ) - (-50 kJ) = 70 kJ

4. A + C --> 2 B:
To calculate the enthalpy change for A + C --> 2 B, we need to use the enthalpy changes for A --> B and C --> B. We need to multiply the enthalpy change for C --> B by 2 and add it to the enthalpy change for A --> B.
A + C --> 2 B = (2 x 20 kJ) + (-50 kJ) = -10 kJ

To know more about enthalpy visit:

https://brainly.com/question/29145818

#SPJ11

The isoelectric point of glutamic acid is approximately 5.79.

The isoelectric point (pI) of an amino acid is the pH at which the c acid has a net neutral charge. To calculate the pI of glutamic acid, we need to determine the pH at which the α-carboxyl group (pKa 2.10) and β-carboxyl group (pKa 4.07) are deprotonated, and the α-amino group (pH 9.47) is protonated.
Since the α-carboxyl group has the lowest pKa, it will be the first to deprotonate. At a pH higher than 2.10, the α-carboxyl group will be negatively charged (-COO-). However, the β-carboxyl group will still be protonated (COOH) and the α-amino group will also be protonated (NH3+).
pI = (pKa1 + pKa2) / 2 = (2.10 + 4.07) / 2 = 3.085
The isoelectric point of glutamic acid is 3.085, which is the pH at which the amino acid has an equal number of positive and negative charges.
The isoelectric point (pI) of glutamic acid can be calculated using the pKa values provided. Glutamic acid has three ionizable groups: α-COOH, β-COOH, and α-NH2. The pI is the pH at which the molecule carries no net charge.
To calculate the pI, you need to find the average of the pKa values that correspond to the protonation/deprotonation equilibria around the zwitterionic form. In the case of glutamic acid, these are the pKa values for α-COOH (2.10) and α-NH2 (9.47).
pI = (pKa of α-COOH + pKa of α-NH2) / 2
pI = (2.10 + 9.47) / 2
pI = 11.57 / 2
pI ≈ 5.79

To know more about iselectric visit:-

https://brainly.com/question/31609011

#SPJ11

In a concentration cell, the two half-cells are identical, except for the concentration of the electrolyte. The cell potential arises due to the concentration difference between the two half-cells. The cell potential can be calculated using the Nernst equation:

Ecell = E°cell - (RT/nF) ln Q

where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant, T is the temperature in Kelvin, n is the number of electrons transferred in the balanced redox reaction, F is the Faraday constant, and Q is the reaction quotient.

In this case, the half-cell reactions are:

Cr3+(0.28 M) + 3e^- → Cr(s)

Cr3+(1.77 M) + 3e^- → Cr(s)

The overall cell reaction is:

Cr3+(1.77 M) → Cr3+(0.28 M)

The reaction quotient Q is the ratio of the concentrations of the products and reactants raised to their stoichiometric coefficients. Since the reaction involves only one species, Q is simply the concentration ratio of Cr3+:

Q = [Cr3+(0.28 M)] / [Cr3+(1.77 M)] = 0.158

The standard cell potential, E°cell, for this reaction is zero since both half-reactions involve the same species in the same oxidation state.

Substituting the given values and the calculated Q into the Nernst equation:

Ecell = 0 - (0.0257 V/K) ln 0.158 = 0.043 V

Therefore, the cell potential of the chromium concentration cell at 25°C is 0.043 V.

To know more about concentration refer here

https://brainly.com/question/10725862#

#SPJ11

Answer:

the answer and the explanation is on the picture hope you understood

Explanation:

The resulting solution will be a dilute solution of [tex]MgCl_2[/tex] with a concentration of [tex]3.33 \times 10^{-5} M[/tex].

To determine the nature of the resulting solution, we can use the following approach:

Step 1: Compose a balanced chemical equation for the reaction of magnesium hydroxide and hydrochloric acid (HCl).

[tex]2HCl + Mg(OH)_2 \rightarrow MgCl_2 + 2H_2O[/tex]

Count the moles of HCl and magnesium hydroxide in the solution in step two.

Number of HCl moles = (concentration of HCl) × (volume of HCl)

= ([tex]1.50 \times 10^{-4} M[/tex]) × (0.200 L) = [tex]3.00 \times 10^{-5[/tex] moles

Number of moles of Mg(OH)2 = (concentration of Mg(OH)2) × (volume of Mg(OH)2)

= ([tex]1.75 \times 10^{-4} M[/tex]) × (0.135 L) = [tex]2.36 \times 10^{-5[/tex] moles

Step 3 - Identify the reaction's limiting reagent. The amount of the product created is determined by the reactant that is totally consumed or the limiting reagent. We compare the moles of each reactant and utilize the stoichiometry of the balanced equation to determine the limiting reagent. By looking at the equation in its whole, we can observe that 2 moles of HCl and 1 mole of magnesium hydroxid react:

One mole of magnesium hydroxide and two moles of HCl react.

[tex]3.00 \times 10^{-5[/tex] moles of HCl react with (1/2) × [tex]3.00 \times 10^{-5} = 1.50 \times 10^{-5[/tex]moles of [tex]Mg(OH)_2[/tex]

[tex]2.36 \times 10^{-5[/tex] moles of [tex]Mg(OH)_2[/tex] is less than [tex]1.50 \times 10^{-5[/tex] moles of [tex]Mg(OH)_2[/tex], so [tex]Mg(OH)_2[/tex] is the limiting reagent.

Step 4: Calculate the amount of [tex]MgCl_2[/tex] form. From the balanced equation, we know that 1 mole of [tex]Mg(OH)_2[/tex] produces 1 mole of [tex]MgCl_2[/tex]:

1 mole of [tex]Mg(OH)_2[/tex] produces 1 mole of [tex]MgCl_2[/tex]

[tex]1.50 \times 10^{-5[/tex]moles of [tex]Mg(OH)_2[/tex] produces [tex]1.50 \times 10^{-5[/tex] moles of [tex]MgCl_2[/tex]

Step 5: Calculate the concentration of [tex]MgCl_2[/tex] in the resulting solution:

Concentration of [tex]MgCl_2[/tex] = (moles of [tex]MgCl_2[/tex]) / (total volume of solution) = ([tex]1.50 \times 10^{-5[/tex] moles) / (0.200 L + 0.135 L) = [tex]3.33 \times 10^{-5[/tex] M

To learn more about dilute solutions

https://brainly.com/question/24869996

#SPJ4

To determine the mass of chlorine required to react completely with 12.15 g of magnesium, we need to use the balanced chemical equation for the reaction:

Mg + Cl2 → MgCl2

From this equation, we can see that 1 mole of magnesium reacts with 1 mole of chlorine to produce 1 mole of magnesium chloride. The molar mass of magnesium is 24.31 g/mol, and the molar mass of chlorine is 35.45 g/mol.

We can use the given mass of magnesium and its molar mass to calculate the number of moles present:

moles of Mg = mass of Mg / molar mass of Mg
moles of Mg = 12.15 g / 24.31 g/mol
moles of Mg = 0.500 mol

Since the stoichiometry of the reaction is 1:1, we know that 0.500 moles of chlorine are required to react completely with the given amount of magnesium. We can convert this to grams of chlorine using its molar mass:

mass of Cl2 = moles of Cl2 x molar mass of Cl2
mass of Cl2 = 0.500 mol x 35.45 g/mol
mass of Cl2 = 17.72 g

Therefore, 17.72 g of chlorine would be required to react completely with 12.15 g of magnesium.

To know more about mass, visit;

https://brainly.com/question/86444

#SPJ11

The emf generated by the cell when [Ni₂⁺] = 0.100 M and [Zn₂⁺] = 2.25 M is 0.4400 V.

Electromotive force (EMF) is the name given to the electrical potential produced by an electrochemical cell (generator) or by altering the magnetic field (batteries).

Given, The standard emf for the cell using the overall cell reaction below is +0.48 V.

Zn (s) + Ni2+ (aq) → Zn2+ (aq) + Ni (s)

When the cell is NOT under standard conditions, i.e. 1M of each reactant at T = 25°C and P = 1 atm; then the Nernst Equation must be used. The equation relates E°cell, the number of electrons transferred, a charge of 1 mol of an electron to Faraday, and finally, the Quotient ratio between products/reactants

According to the Nernst Equation:

Ecell = E0cell - (RT/nF) x lnQ

In which: Ecell = non-standard value

E° or E0cell or E°cell or EMF = Standard EMF: standard cell potential

R is the gas constant (8.3145 J/mol-K)

T is the absolute temperature = 298 K

n is the number of moles of electrons transferred by the cell's reaction

F is Faraday's constant = 96485.337 C/mol or typically 96500 C/mol

Q is the reaction quotient, where

Q = [C]^c * [D]^d / [A]^a*[B]^b

Pure solids and pure liquids are not included. Also, note that if we use partial pressure (for gases)

Q = P-A^a / (P-B)^b

Substituting the given values in Nernst Equation:

Ecell = E° - (RT/nF) x lnQ

Ecell = 0.48 - (8.314*298)/(2*96500) * ln([Zn+2]/[Ni+2])

Ecell = 0.48 - (8.314*298)/(2*96500) * ln(2.25/0.1)

Ecell = 0.4400 V.

Thus, the emf of the cell is 0.4400 V.

To learn more about emf, refer to the link:

https://brainly.com/question/30893775

#SPJ12

A complete combustion of 8.90 g of hydrocarbon will produced 27.0 g of CO₂ and 13.8 g of H₂O. Then, the empirical formula for the hydrocarbon is CH₂.

To determine the empirical formula of the hydrocarbon, we need to find the moles of carbon and hydrogen in the given compounds.

From the given data,

Mass of CO₂ produced = 27.0 g

Mass of H₂O produced = 13.8 g

Mass of hydrocarbon consumed = 8.90 g

Using the molar masses, we can convert the masses to moles;

Moles of CO₂ = 27.0 g / 44.01 g/mol = 0.613 mol

Moles of H₂O = 13.8 g / 18.02 g/mol = 0.766 mol

Moles of hydrocarbon = 8.90 g / molar mass

Next, we need to find the ratio of moles of carbon and hydrogen in the hydrocarbon. For this, we can use the following equations;

Moles of carbon = Moles of CO₂

Moles of hydrogen =0.5 x Moles of H₂O

Substituting the values, we get;

Moles of carbon = 0.613 mol

Moles of hydrogen = 0.5 x 0.766 mol

= 0.383 mol

Now we need to find the empirical formula by dividing each number of moles by the smallest number of moles;

Empirical formula = C0.613/0.383H1.00

Multiplying both sides by 2, we get;

Empirical formula = C₁.60H₂.00

Therefore, the empirical formula for the hydrocarbon is CH₂.

To know more about empirical formula here

https://brainly.com/question/11588623

#SPJ4

The molarity of the solution is 5.30 x 10−3 M (option b).

To calculate the molarity of a solution, we need to know the number of moles of solute present in a given volume of solution.

First convert the mass of ammonium acetate (0.126 g) to moles using its molar mass (77.08 g/mol).

This gives us 0.00163 moles of ammonium acetate. Next, we need to convert the volume of the solution (250.0 mL) to liters (0.250 L).

Finally, we divide the number of moles of ammonium acetate by the volume of the solution in liters to get the molarity. The morality is 5.30 x 10−3 M, which is option B.

For more such questions on molarity, click on:

https://brainly.com/question/30404105

#SPJ11

The molarity is obtained by dividing the number of moles of ammonium acetate by the litres of the solution's volume. Option B has a morality of 5.30 x 103 M.

We need to know how many moles of solute there are in a specific volume of solution in order to calculate the molarity of a solution.

Using the molar mass of ammonium acetate (77.08 g/mol), first convert the mass of ammonium acetate (0.126 g) to moles.

We now have 0.00163 moles of ammonium acetate as a result. The volume of the solution (250.0 mL) must then be converted to litres (0.250 L).

The molarity is obtained by dividing the number of moles of ammonium acetate by the litres of the solution's volume. Option B has a morality of 5.30 x 103 M.

learn more about molarity here:

https://brainly.com/question/8732513

#SPJ11

27.0 mL of a .150m Na[tex]_2[/tex]S solution is needed to completely react with 18.5 ml of 225m NiCl[tex]_2[/tex] solution. The correct answer is option c) 27.0 mL.

The balanced chemical equation for the reaction between Na[tex]_2[/tex]S and [tex]NiCl_2[/tex]  is:

Na[tex]_2[/tex]S + NiCl[tex]_2[/tex]  → 2 NaCl + NiS

From the balanced equation, we can see that one mole of NiCl[tex]_2[/tex]  reacts with one mole of Na[tex]_2[/tex]S to produce one mole of NiS.

First, let's calculate the number of moles of NiCl[tex]_2[/tex]  in 18.5 mL of 0.225 M solution:

moles of NiCl[tex]_2[/tex]  = concentration * volume in liters

moles of NiCl[tex]_2[/tex]  = 0.225 mol/L * 0.0185 L

moles of NiCl[tex]_2[/tex]  = 0.00416 mol

Since one mole of NiCl[tex]_2[/tex] reacts with one mole of Na[tex]_2[/tex]S, we need 0.00416 moles of Na[tex]_2[/tex]S to completely react with the NiCl[tex]_2[/tex] .

Now, let's calculate the volume of 0.150 M Na[tex]_2[/tex]S solution that contains 0.00416 moles of Na[tex]_2[/tex]S:

moles of Na[tex]_2[/tex]S = concentration * volume in liters

0.00416 mol = 0.150 mol/L * volume in liters

volume in liters = 0.00416 mol / 0.150 mol/L

volume in liters = 0.0277 L

Finally, we convert the volume to milliliters:

volume in mL = 0.0277 L * 1000 mL/L

volume in mL = 27.7 mL

Therefore, the volume of a 0.150 M Na[tex]_2[/tex]S solution that is needed to completely react with 18.5 mL of a 0.225 M NiCl[tex]_2[/tex] solution is approximately 27.7 mL.

Since the answer choices are given in mL, we round to the nearest hundredth and select option (a) 27.0 mL.

Learn more about balanced chemical equations here:

https://brainly.com/question/28294176

#SPJ11

The pure molecular substance with the lowest vapor pressure at 25°C is CH₃(CH₂)₃OH (1-pentanol).

The vapor pressure of a substance depends on the strength of its intermolecular forces. The stronger the intermolecular forces, the lower the vapor pressure. The intermolecular forces in a molecule depend on its size and shape, as well as the types of atoms and functional groups present.

Out of the given options, 1-pentanol (CH₃(CH₂)₃OH) has the largest molecular size and longest carbon chain, making it the most polar and having the strongest intermolecular forces of attraction.

Therefore, it has the lowest vapor pressure at 25°C compared to the other molecules. On the other hand, methanol (CH₃OH) has the smallest molecular size and the weakest intermolecular forces, making it the most volatile and having the highest vapor pressure at 25°C.

Learn more about vapor pressure here:

https://brainly.com/question/30447018

#SPJ11

The amount of MgO produced when 1.25 moles of O₂ react completely with Mg is 60.8 g.

The balanced chemical equation shows that 2 moles of Mg react with 1 mole of O₂ to produce 2 moles of MgO. From the stoichiometry of the equation, we can calculate the number of moles of MgO produced by multiplying the number of moles of O₂ by the stoichiometric coefficient. Finally, using the molar mass of MgO, we can convert the moles of MgO to grams.

In this case, 1.25 moles of O₂ reacting with Mg will produce (1.25 mol O₂) * (2 mol MgO / 1 mol O₂) * (40.31 g MgO / 1 mol MgO) = 60.8 g MgO.

Learn more about moles

brainly.com/question/30885025

#SPJ11

The mass of H₂ O required to form 1.4 L of O₂  gas at a temperature of 315K and a pressure of 0.957 atm is approximately 31.44 grams. The vapor pressure of ethanol at 15°C can be calculated using the Clausius-Clapeyron equation and is approximately 12.17 torr.

To determine the mass of H₂ O needed to produce 1.4 L of O₂  gas at 315K and 0.957 atm, the stoichiometry of the reaction is used.

The balanced equation shows that 2 moles of H₂ O are required to produce 1 mole of O₂ . By converting the given volume of O₂  to moles using the ideal gas law, the moles of H₂ O can be determined.

Finally, using the molar mass of H₂ O, the mass of H₂ O is calculated to be approximately 31.44 grams.

To find the vapor pressure of ethanol at 15°C, the Clausius-Clapeyron equation is utilized. The equation relates the vapor pressure of a substance at one temperature to its vapor pressure at another temperature.

By plugging in the given values of the heat of vaporization of ethanol, its boiling point, and the desired temperature of 15°C,  therefore the vapor pressure of ethanol is calculated to be approximately 12.17 torr.

Learn more about mass

brainly.com/question/11954533

#SPJ11

To calculate the mass of hydrogen gas produced when 2.2g of zinc (Zn) reacts with excess aqueous hydrochloric acid (HCl), we need to consider the balanced chemical equation for the reaction and the molar ratios.

The balanced chemical equation for the reaction is:

Zn + 2HCl → ZnCl2 + H2

From the equation, we can see that 1 mole of zinc reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas.

To calculate the mass of hydrogen gas produced, we can use the following steps:

1. Convert the given mass of zinc to moles using its molar mass.

2. Use the mole ratio between zinc and hydrogen gas from the balanced equation.

3. Calculate the moles of hydrogen gas produced.

4. Convert the moles of hydrogen gas to grams using its molar mass.

By following these steps and using the appropriate values, we can find the mass of hydrogen gas produced from the given mass of zinc.To

To learn more about mass click here:brainly.com/question/11954533

#SPJ11

The Strecker synthesis is a method for the synthesis of amino acids from aldehydes using cyanide and ammonia.

Here is how phenylalanine can be prepared using Strecker synthesis starting from phenylacetaldehyde:

Step 1: Condensation

Phenylacetaldehyde is condensed with hydrogen cyanide (HCN) to form the cyanohydrin intermediate:

Phenylacetaldehyde + HCN → phenylacetaldehyde cyanohydrin

Step 2: Hydrolysis

The cyanohydrin intermediate is then hydrolyzed in the presence of aqueous acid to form an amino acid. In this case, the amino acid formed will be phenylalanine.

Phenylacetaldehyde cyanohydrin + NH3 + H2O → phenylalanine + HCN

Therefore, phenylalanine can be prepared from phenylacetaldehyde using Strecker synthesis by condensing it with HCN to form phenylacetaldehyde cyanohydrin,

followed by hydrolysis in the presence of aqueous acid to form phenylalanine.

To know more about Strecker synthesis refer here

https://brainly.com/question/28026702#

#SPJ11

At equilibrium, the ratio of the product concentrations to reactant concentrations is constant, and this is given by the equilibrium constant, Kc. value of Kp for the given reaction at 230.0°C is 2.57 x 10^7 atm.

The equilibrium constant, Kp, is related to Kc by the equation:[tex]Kp = Kc(RT)^(∆n)[/tex] where R is the gas constant, T is the temperature in Kelvin, and ∆n is the difference in the number of moles of gas molecules between the products and reactants.

In this case, the value of Kc is given as C at 230.0°C. To calculate Kp, we need to know the value of ∆n. From the balanced chemical equation, we can see that there are two moles of gas molecules on the reactant side and two moles of gas molecules on the product side. Therefore, ∆n = 2 - 2 = 0.

At 230.0°C, the value of the gas constant, R, is 0.08206 L⋅atm/mol⋅K. Converting the temperature to Kelvin, we get: T = 230.0°C + 273.15 = 503.15 K

Substituting the values into the equation, we get:

[tex]Kp = Kc(RT)^(∆n) = 6.24 x 10^5 (0.08206 L⋅atm/mol⋅K × 503.15 K)^0Kp = 6.24 x 10^5 × 41.15[/tex]

[tex]Kp = 2.57 x 10^7 atm[/tex]

Therefore, the value of Kp for the given reaction at 230.0°C is 2.57 x 10^7 atm. This value indicates that the reaction strongly favors the formation of NO2 at this temperature and pressure.

Know more about  equilibrium constant here:

https://brainly.com/question/31321186

#SPJ11

In an atom only one electron can have the quantum number designations n=3, ml=0, ms=1/2 , as per the Pauli exclusion principle.

In an atom, the quantum numbers n, ml, and ms are used to describe the energy, orientation, and spin of electrons. The quantum number n specifies the energy level or shell of the electron, ml specifies the orientation of the electron in space, and ms specifies the spin of the electron.

For the given quantum number designations n=3, ml=0, ms=1/2, we know that the electron is in the third energy level or shell (n=3), and it is oriented along the z-axis (ml=0). The ms value of 1/2 indicates that the electron has a positive spin.

According to the Pauli exclusion principle, no two electrons in an atom can have the same set of quantum numbers. Therefore, there can be only one electron with the given set of quantum number designations in an atom.

For more such questions on quantum number, click on:

https://brainly.com/question/25786066

#SPJ11

In an atom, only two electrons can have the quantum number designations n=3, ml=0, ms=1/2.

An electron's state in an atom or molecule is described by a set of four numbers called quantum number. These values are used to identify an electron's energy, position, and orientation within an atom. The primary quantum number (n), azimuthal quantum number (l), magnetic quantum number (ml), and spin quantum number (ms) are the four quantum numbers. The electron's energy level is described by the main quantum number, the orbital's form by the azimuthal quantum number, the orbital's orientation in space by the magnetic quantum number, and the electron's spin orientation by the spin quantum number. Each electron in an atom is individually identified by a combination of these four quantum numbers.

1. The principal quantum number (n) determines the energy level and size of the orbital. n=3 refers to the third energy level.
2. The magnetic quantum number (ml) specifies the shape of the orbital. ml=0 refers to an s-orbital (spherical shape).
3. The spin quantum number (ms) indicates the electron's spin. ms=1/2 refers to one of the two possible spins an electron can have (either +1/2 or -1/2).

Since we are considering n=3 and ml=0, this corresponds to the 3s orbital. Each s-orbital can accommodate a maximum of two electrons with opposite spins. However, since ms=1/2 is specified, we are only considering electrons with that specific spin. Therefore, there can be only one electron in the 3s orbital with the quantum number designations n=3, ml=0, ms=1/2.

Learn more about quantum number here:

https://brainly.com/question/16746749

#SPJ11

CO2 (carbon dioxide) is more closely correlated with temperature than CH4 (methane). This is mainly because CO2 has a longer atmospheric lifetime, allowing it to have a more sustained and significant impact on global temperatures.

Additionally, CO2 is emitted in larger quantities by human activities, such as burning fossil fuels, leading to a more pronounced effect on climate change. It has an atmospheric lifetime of hundreds of years, which means it remains in the atmosphere for a long time. This allows it to accumulate over time and contribute to the overall warming of the planet.

CH4, on the other hand, has an atmospheric lifetime of around 12 years, which means it breaks down more quickly and does not accumulate as much. Overall, while both CO2 and CH4 contribute to global warming, CO2 is more closely correlated with temperature due to its longer atmospheric lifetime and higher concentration in the atmosphere.

To know more about temperatures visit :-

https://brainly.com/question/31688939

#SPJ11

We used the given molar solubility of Mg(CN)₂ to determine the concentrations of Mg²+ and CN- ions using an ICE table. We then used these concentrations to calculate the value of Ksp for Mg(CN)2 at the given temperature.

The ICE table for the reaction is:
Mg(CN)2(s) = Mg²+(aq) + 2 CN-(aq)
I            0             0                0
C          -x             +x              +2x
E         1.4x10⁻⁵      x               2x
Here, x is the concentration of Mg⁺² and 2x is the concentration of CN⁻.
The solubility product constant, Ksp, is defined as the product of the concentrations of the ions raised to their stoichiometric coefficients. Therefore, for the given reaction, we have:
Ksp = [Mg⁺²][CN⁻]²
Substituting the equilibrium concentrations from the ICE table, we get:
Ksp = (1.4x10⁻⁵)(2x)²
Simplifying the expression, we get:
Ksp = 5.6x10⁻¹¹
Therefore, the value of Ksp for Mg(CN)2 at the given temperature is 5.6x10⁻¹¹.

Learn more about solubility here:

https://brainly.com/question/31493083

#SPJ11

The reagent strip test for ketones may detect the urinary presence of acetoacetate, beta-hydroxybutyrate, and acetone.

These are the three ketone bodies that can be produced in the body during a state of ketosis, which is a metabolic state in which the body uses fat for energy instead of carbohydrates. Ketosis can occur in individuals who follow a low-carbohydrate diet, have uncontrolled diabetes, or are fasting. The presence of ketones in the urine can indicate that the body is in a state of ketosis and may be a sign of uncontrolled diabetes or other metabolic disorders. The reagent strip test works by detecting the presence of nitroprusside, a chemical that reacts with ketones to produce a color change on the strip. The intensity of the color change can be used to determine the level of ketones present in the urine. The reagent strip test for ketones may detect the urinary presence of acetoacetate, beta-hydroxybutyrate, and acetone. It is important to note that the reagent strip test for ketones is not a diagnostic tool and should be used in conjunction with other tests and medical evaluations to determine the underlying cause of ketosis.

learn more about acetoacetate

https://brainly.com/question/31638826

#SPJ11

The mean free path in the gas is approximately 5.38 × 10^-7 m, the rms speed of the atoms is approximately 1,242 m/s, and the average energy per atom is approximately 2.84 × 10^-21 J.

To solve this problem, we will use the following equations:

(a) Mean free path = (k * T) / (sqrt(2) * pi * d^2 * P)

(b) Root mean square (rms) speed = sqrt((3 * k * T) / (m))

(c) Average energy per atom = (3/2) * k * T

where:

k is the Boltzmann constant (1.38 × 10^-23 J/K)

T is the temperature in kelvin (13.0 K)

d is the diameter of a helium atom (2.64 × 10^-10 m)

P is the pressure in atm (9.00 × 10^-2 atm)

m is the mass of a helium atom (6.646 × 10^-27 kg)

(a) Mean free path:

Mean free path = (k * T) / (sqrt(2) * pi * d^2 * P)

Mean free path = (1.38 × 10^-23 J/K * 13.0 K) / (sqrt(2) * pi * (2.64 × 10^-10 m)^2 * 9.00 × 10^-2 atm)

Mean free path ≈ 5.38 × 10^-7 m

(b) Root mean square speed:

Root mean square speed = sqrt((3 * k * T) / (m))

Root mean square speed = sqrt((3 * 1.38 × 10^-23 J/K * 13.0 K) / (6.646 × 10^-27 kg))

Root mean square speed ≈ 1,242 m/s

(c) Average energy per atom:

Average energy per atom = (3/2) * k * T

Average energy per atom = (3/2) * 1.38 × 10^-23 J/K * 13.0 K

Average energy per atom ≈ 2.84 × 10^-21 J

For more question on mean free path click on

https://brainly.com/question/27461108

#SPJ11