The mass of solid \ce{NaOH} required to make a 0.10 M solution of 400 mL is 1.60 grams.
To calculate the mass of solid \ce{NaOH} required, we need to use the formula:
Mass (in grams) = molarity (in mol/L) x volume (in L) x molar mass (in g/mol)
First, we need to convert the volume from milliliters to liters by dividing by 1000:
400 mL ÷ 1000 mL/L = 0.4 L
Next, we plug in the values we know into the formula:
Mass (in grams) = 0.10 mol/L x 0.4 L x 40 g/mol
Mass (in grams) = 1.60 g
Finally, we round the answer to two significant figures, giving us a final answer of 1.6 grams.
First, determine the number of moles of NaOH required. Moles = Molarity × Volume (L)
Moles = 0.10 M × (400 mL / 1000 mL/L) = 0.040 mol NaOH, 2. Next, calculate the mass of NaOH using its molar mass (22.99 g/mol for Na + 15.999 g/mol for O + 1.008 g/mol for H = 39.997 g/mol).
To know more about NaOH visit:-
https://brainly.com/question/26482748
#SPJ11
The standard reduction potential of X is 1.23 V and that of Y is -0.44 V; therefore X is oxidized by Y. True False
The statement " The standard reduction potential of X is 1.23 V and that of Y is -0.44 V; therefore X is oxidized by Y" is True. because standard reduction potential of X (1.23 V) is greater than that of Y (-0.44 V), X has a greater tendency to be reduced than Y.
Therefore, in a redox reaction, X would be oxidized (lose electrons) while Y would be reduced (gain electrons).
The standard reduction potential is a measure of the tendency of a substance to gain electrons and undergo reduction. A higher standard reduction potential indicates a greater tendency to be reduced, while a lower standard reduction potential indicates a lower tendency to be reduced.
For more question on standard reduction potential click on
https://brainly.com/question/31737961
#SPJ11
1.60 moles Co, 1.60 moles H2O, 4.00 moles CO2, 4.00 moles H2 are found in a 8.00L container at 690C at equilibrium. Calculate the value of the equilibrium constant.
The value of the equilibrium constant is 6.25.
To calculate the equilibrium constant, we need to use the balanced chemical equation and the Law of Mass Action. The balanced chemical equation for the reaction is:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
The Law of Mass Action expression for this reaction is:
Kc = [CO2][H2]/[CO][H2O]
where Kc is the equilibrium constant, and the square brackets denote molar concentrations.
From the given information, we know that:
[CO] = 1.60 moles/8.00 L = 0.20 M
[H2O] = 1.60 moles/8.00 L = 0.20 M
[CO2] = 4.00 moles/8.00 L = 0.50 M
[H2] = 4.00 moles/8.00 L = 0.50 M
Substituting these values into the Law of Mass Action expression gives:
Kc = (0.50)(0.50)/(0.20)(0.20) = 6.25
Therefore, the value of the equilibrium constant is 6.25.
To know more about equilibrium constant click on below link :
https://brainly.com/question/31321186
#SPJ11
You need to present your observations from a chemistry experiment to the class. Which database feature should you use so that your presentation is organized and easy to view
If you need to present your observations from a chemistry experiment to the class, the database feature that you should use to organize and present your information effectively is tables. Tables are a powerful tool in database software that can help you organize, sort, filter, and analyze data in a meaningful way.
By using tables, you can organize your observations into rows and columns, which makes it easier to view and compare different sets of data. You can also use tables to sort your data by different criteria, such as date, time, or value, so that you can easily identify patterns and trends.
In addition, tables can be used to filter out unwanted data or to highlight specific data that you want to focus on. This is particularly useful if you have a large dataset and want to focus on a specific subset of data for your presentation.
Overall, using tables in your presentation is an effective way to organize and present your observations from a chemistry experiment in a clear and concise manner. It helps to make your presentation more visually appealing and easy to understand, and it allows your audience to quickly grasp the key points of your experiment.
To know more about database feature, refer to the link below:
https://brainly.com/question/31679023#
#SPJ11
Reaction: H2O2(aq)+3I- (aq) +2H(aq)->I3-(aq)+2H2O(l) in the first 10.0 seconds of the reaction, the concentration of i−i− drops from 1.180 mm to 0.805 mm .(a) Calculate the avg rate of this reaction in this time interval.(b)Predict the rate of chance in the concn of H+ (that is, DELTA [H+]/DELTAt) during this time interval.
(a) The average rate of the reaction can be calculated using the formula:
average rate = Δ[I3^-]/Δt = -Δ[I^-]/3Δt
where Δ[I^-] is the change in the concentration of I^- over the time interval, and Δt is the time interval.
Δ[I^-] = [I^-]final - [I^-]initial = 0.805 mm - 1.180 mm = -0.375 mm
Δt = 10.0 s
Substituting these values into the formula, we get:
average rate = -Δ[I^-]/3Δt = -(-0.375 mm)/(3 × 10.0 s) = 0.0125 mm/s
Therefore, the average rate of the reaction during the first 10.0 seconds is 0.0125 mm/s.
(b) The balanced equation for the reaction shows that there are two moles of H^+ consumed for every mole of H2O2 reacted:
H2O2(aq) + 3I^-(aq) + 2H^+(aq) → I3^-(aq) + 2H2O(l)
Therefore, the rate of change in the concentration of H^+ can be calculated using the formula:
rate of change in [H^+] = -2 × average rate
where the factor of 2 is included because there are two moles of H^+ consumed per mole of H2O2 reacted.
Substituting the average rate calculated in part (a) into the formula, we get:
rate of change in [H^+] = -2 × 0.0125 mm/s = -0.0250 mm/s
Therefore, the rate of change in the concentration of H^+ during the first 10.0 seconds is -0.0250 mm/s.
To know more about concentration please visit:
https://brainly.com/question/12970323
#SPJ11
a student titrated 50.0ml of a 0.10m solution of a certain weak acid with naoh(aq) . the results are given in the graph above. identify a ph value between 2.5 and 7.5 at which the concentration of the weak acid being titrated is less than the concentration of its conjugate base.
the equivalence point of the titration occurred at approximately 35 mL of NaOH added. This corresponds to a pH of around 8.0.
To find a pH value between 2.5 and 7.5 where the concentration of the weak acid is less than its conjugate base, we need to look at the region before the equivalence point on the graph.
At the beginning of the titration, before any NaOH is added, the pH is determined by the weak acid. We can see from the graph that the pH starts at around 2.5. As NaOH is added, the pH increases and eventually reaches the equivalence point at pH 8.0.
Between the initial pH of 2.5 and the equivalence point at pH 8.0, there is a region where the weak acid is partially neutralized but not completely. This means that there are still some molecules of the weak acid present, but they are also partially converted to their conjugate base.
To find a pH value where the concentration of the weak acid is less than its conjugate base, we need to find a point on the graph where the pH is in the range of 2.5 to 7.5, and the curve is steep. This indicates that the solution is close to the equivalence point, where the concentration of the weak acid and its conjugate base are equal.
Looking at the graph, we can see that there is a steep part of the curve around pH 5.0. This suggests that at this pH, the weak acid is mostly converted to its conjugate base, and the concentration of the weak acid is less than that of its conjugate base. Therefore, a pH value between 2.5 and 7.5 where the concentration of the weak acid is less than its conjugate base is approximately 5.0.
To know more about conjugate base click this link-
brainly.com/question/30086613
#SPJ11
) What is the advantage of recrystallizing your product from a 1:1 aqueous ethanol solution rather than using ethanol alone
Recrystallization is a technique used to purify solid compounds by dissolving the impure solid in a suitable solvent and then allowing the compound to crystallize out of the solution. The basic principle behind recrystallization is that different compounds have different solubilities in different solvents and at different temperatures, so by selecting the appropriate solvent and conditions, impurities can be removed from the compound of interest.
Recrystallizing a product from a 1:1 aqueous ethanol solution has several advantages over using ethanol alone. Firstly, the presence of water in the solvent mixture can help to dissolve the impurities present in the product more effectively, leading to a purer final product. Secondly, the use of a mixed solvent system can provide more precise control over the rate of crystal growth and the size of the resulting crystals, which can have important implications for the physical properties of the product. Finally, the use of a mixed solvent system can help to mitigate issues with solubility, as some compounds may be more soluble in water than in pure ethanol or vice versa. Overall, recrystallizing from a 1:1 aqueous ethanol solution can lead to a higher quality and more consistent final product.
To know more about Recrystallization visit:
https://brainly.com/question/29215760
#SPJ11
chemistry student must write down in her lab notebook the concentration of a solution of sodium thiosulfate. The concentration of a solution equals the mass of what's dissolved divided by the total volume of the solution. Here's how the student prepared the solution: The label on the graduated cylinder says: empty weight: 8.50g She put some solid sodium thiosulfate into the graduated cylinder and weighed it. With the sodium thiosulfate added, the cylinder weighed 51.5g. She added water to the graduated cylinder and dissolved the sodium thiosulfate completely. Then she read the total volume of the solution from the markings on the graduated cylinder. The total volume of the solution was 140.2mL. What concentration should the student write down in her lab notebook
The student weighed the sodium thiosulfate and found that it had a mass of 43.0 g (51.5 g – 8.50 g). The mass of the sodium thiosulfate divided by the total volume of the solution gives the concentration.
However, the total volume given is in milliliters, while the mass is in grams. To obtain the volume in liters, we divide the volume in milliliters by 1000.
Then, we divide the mass of the sodium thiosulfate by the volume in liters to get the concentration. Thus, the concentration of the sodium thiosulfate solution is:
Concentration = Mass of sodium thiosulfate / Volume of solution
Volume of solution = 140.2 mL / 1000 mL/L = 0.1402 L
Concentration = 43.0 g / 0.1402 L = 306.7 g/L
Therefore, the student should write down the concentration as 306.7 g/L in her lab notebook.
To know more about the sodium thiosulfate refer here :
https://brainly.com/question/29525506#
#SPJ11
Trans fats are _____. Group of answer choices generally found in foods containing polyunsaturated fatty acids (PUFAs) generally found in non-organic food produced commercially via a process called partial hydrogenation typically liquids at room temperature
Trans fats are a type of unsaturated fat that is generally found in foods containing polyunsaturated fatty acids (PUFAs). They are produced commercially through a process called partial hydrogenation, which converts liquid oils into solid fats. This process enhances the shelf life and stability of foods, which is why trans fats are commonly found in processed foods such as baked goods, fried foods, and snacks.
While PUFAs help to reduce cholesterol levels and inflammation, trans fats can raise bad cholesterol levels (LDL) and lower good cholesterol levels (HDL), leading to an increased risk of heart disease.
However, trans fats are not healthy for our bodies. They raise our levels of "bad" cholesterol, lower our levels of "good" cholesterol, and increase our risk of heart disease, stroke, and type 2 diabetes. The American Heart Association recommends limiting trans fat intake to less than 1% of our daily calorie intake.
It's important to note that not all foods containing PUFAs are high in trans fats. PUFAs are healthy fats that can be found in foods such as fatty fish, nuts, and seeds. To reduce your intake of trans fats, it's best to choose whole, unprocessed foods and to read food labels carefully to avoid foods that contain hydrogenated oils.
For more information on polyunsaturated fatty acids visit:
brainly.com/question/12409149
#SPJ11
If potassium carbonate is used to selectively precipitate one of the cations while leaving the other cation in solution, which cation will precipitate first
The cation that will precipitate first depends on the specific cations present in the solution, usually one with lower solubility, if we add potassium carbonate.
Potassium carbonate can selectively precipitate certain cations based on their solubility. Generally, cations with lower solubility in water will precipitate first when potassium carbonate is added to the solution. For example, if the solution contains calcium and magnesium cations, calcium carbonate has a lower solubility than magnesium carbonate, so calcium will precipitate first when potassium carbonate is added. Conversely, if the solution contains copper and iron cations, copper carbonate has a lower solubility than iron carbonate, so copper will precipitate first when potassium carbonate is added.
Learn more about potassium carbonate here:
https://brainly.com/question/31412583
#SPJ11
is carried out isothermally and isobarically in a flow reactor where pure A is fed at a concentration of 4.0 mol/dm3. If the equilibrium conversion is found to be 60%. What is the equilibrium constant, Kc if the reaction is a gas phase reaction
The equilibrium constant for this gas phase reaction is 1.6 x 10^-2.
To find the equilibrium constant, Kc, we need to use the equilibrium conversion and the concentration of the reactant, A. The equation for the reaction can help us determine the expression for Kc.
Since the reaction is a gas phase reaction, we can use the partial pressures of the reactant and product in the expression for Kc.
The reaction can be written as:
A ⇌ B + C
At equilibrium, the concentration of A is (1-0.6) x 4.0 = 1.6 mol/dm3, and the concentrations of B and C are also 1.6 mol/dm3 each.
The equilibrium constant expression for this reaction can be written as:
Kc = (pB x pC) / pA
where pA, pB, and pC are the partial pressures of A, B, and C at equilibrium, respectively.
Assuming ideal gas behavior, we can use the ideal gas law to relate the partial pressures to the concentrations:
pA = nA x RT / V
pB = nB x RT / V
pC = nC x RT / V
where nA, nB, and nC are the moles of A, B, and C, respectively, V is the volume of the reactor, and R is the gas constant.
Since the reaction is carried out isothermally and isobarically in a flow reactor, the volume does not change, and we can cancel it out in the expression for Kc:
Kc = (nB x nC) / nA
At equilibrium, nA = 4.0 x 10^-3 x V = 1.6 x 10^-2 mol, and nB = nC = 1.6 x 10^-2 mol.
Substituting these values into the expression for Kc, we get:
Kc = (1.6 x 10^-2)^2 / (1.6 x 10^-2) = 1.6 x 10^-2
Therefore, the equilibrium constant for this gas phase reaction is 1.6 x 10^-2.
Learn more about :
equilibrium constant : brainly.com/question/29802105
#SPJ11
. If 0.100 M HCl were titrated with 0.100 M NaOH, what would be the pH of the solution: (a) before adding NaOH (b) at the equivalence point, and (c) at the halfway point
(a) Before adding NaOH, the pH of the solution would be acidic due to the presence of HCl. The exact pH would depend on the initial concentration of HCl and the dissociation constant of HCl. However, assuming complete dissociation of HCl, the pH would be equal to the negative logarithm of the H+ ion concentration, which is equal to the concentration of HCl in this case. Therefore, pH = -log(0.100) = 1.00.
(b) At the equivalence point, all of the HCl would have reacted with an equal amount of NaOH, resulting in the formation of water and NaCl. At this point, the solution would be neutral since the strong acid and strong base have completely neutralized each other. Therefore, the pH would be equal to 7.00.
(c) At the halfway point, half of the HCl would have reacted with an equal amount of NaOH. This means that half of the initial concentration of HCl would have been neutralized, leaving the other half in solution. The resulting solution would be a buffer, which means that the pH would depend on the dissociation constant of the weak acid, HCl, and the concentration ratio of the acid and its conjugate base. The pH can be calculated using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]), where pKa is the dissociation constant of HCl (which is equal to -log(Ka)), [A-] is the concentration of the conjugate base (which is equal to the concentration of NaCl formed), and [HA] is the concentration of the weak acid (which is equal to half of the initial concentration of HCl). Assuming a pKa of -log(1.3x10^-4) = 3.89, and a concentration of NaCl equal to half of the initial concentration of HCl (0.050 M), and a concentration of HCl equal to 0.050 M, the pH can be calculated as: pH = 3.89 + log(0.050/0.050) = 3.89. Therefore, the pH at the halfway point would be 3.89.
To know more about NaOH visit:-
https://brainly.com/question/29854404
#SPJ11
A uniform deposit of 10.0 grams of silver is needed to completely coat a metal spoon with silver. How long ( in minutes ) would a current of 12.0 A have to be passed through a solution of AgNO3 to silver-coat the metal spoon
A current of 12.0 A would have to be passed through the solution for about 890 minutes (or about 14.8 hours) to silver-coat the metal spoon with 10.0 grams of silver.
The amount of silver deposited is directly proportional to the electric charge passed through the solution. The relationship is given by Faraday's law of electrolysis:
amount of substance = (electric charge) / (Faraday's constant * charge per mole of substance)
where Faraday's constant is the amount of electric charge carried by one mole of electrons (96485 C/mol for one-electron transfer reactions) and the charge per mole of silver is the charge on one silver ion (Ag+) (1 electron per ion).
We can rearrange this equation to solve for the time required:
time = (amount of substance) * (Faraday's constant * charge per mole of substance) / (current * charge per electron)
We have the amount of substance (10.0 g of silver) and the current (12.0 A), and we can look up the charge per mole of silver from the periodic table (the atomic weight of silver is 107.87 g/mol, so the charge per mole of silver is 1 mol Ag+
= [tex]1 * 6.0221*10^{23[/tex] ions [tex]* 1.6022*10^{-19} C/ion = 9.65*10^4 C/mol).[/tex]
Plugging in these values, we get:
time = [tex](10.0 g) * (96485 C/mol) / (12.0 A * 1.6022 * 10^{-19} C/electron)[/tex]
time = [tex]5.34*10^4[/tex] seconds
time = 890 minutes (rounded to the nearest minute)
For more question on current click on
https://brainly.com/question/31593608
#SPJ11
specific heat is the heat required to raise the temperature of 1 g of a substance by 1 oc. based on this definition, what is the equation to calculate specific heat? select one: specific heat
The equation to calculate specific heat is Q = m x c x ΔT, where Q is the amount of heat energy absorbed or released, m is the mass, c is the specific heat, and ΔT is the change in temperature.
This equation helps to determine the amount of heat energy required to raise the temperature of a substance by a certain amount. Specific heat is an important property of a substance because it helps to determine how much heat energy is required to raise the temperature of a substance. Different substances have different specific heat capacities, which means that they require different amounts of heat energy to raise their temperature by the same amount. Understanding specific heat is important in many areas, including engineering, physics, and chemistry.
To learn more about specific heat click here https://brainly.com/question/11297584
#SPJ11
A 25.0 mL sample of an HCl solution is titrated with a NaOH solution. The equivalence point is reached with of base. The concentration of HCl is ________ M.
A 25.0 mL sample of an HCl solution is titrated with a NaOH solution. The equivalence point is reached with of base. The concentration of HCl is 0.100M.
To find the concentration of HCl, we need to use the equation: M1V1 = M2V2, where M1 is the concentration of HCl, V1 is the volume of HCl used, M2 is the concentration of NaOH, and V2 is the volume of NaOH used at the equivalence point.
We know that the volume of NaOH used at the equivalence point is 25.0 mL, which is also the volume of HCl used. We also know that the concentration of NaOH is typically given in the problem.
Let's assume the concentration of NaOH is 0.100 M. Therefore, using the equation above:
M1V1 = M2V2
M1(25.0 mL) = (0.100 M)(25.0 mL)
M1 = (0.100 M)(25.0 mL) / (25.0 mL)
M1 = 0.100 M
So, the concentration of HCl is 0.100 M.
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ11
describe an area in the United States that would likely experience very low levels of photochemical smog.
An area in the United States that would likely experience very low levels of photochemical smog is the Rocky Mountain region, which includes parts of Colorado, Wyoming, Montana, and Idaho.
Photochemical smog is formed when sunlight reacts with pollutants such as nitrogen oxides (NOx) and volatile organic compounds (VOCs) from human activity, such as transportation and industry.
The high altitude of the Rocky Mountains means that the air is thinner, so there is less pollution to react with sunlight. Additionally, the region's low population density means that there are fewer emissions from sources such as cars and factories.
Furthermore, the Rocky Mountain region is characterized by a dry climate, which reduces the potential for the formation of photochemical smog. This is because humidity can help to initiate the chemical reactions that lead to the formation of smog.
To know more about photochemical smog here
https://brainly.com/question/1380323
#SPJ1
What is the most likely charge on an ion formed by an element with a valence electron configuration of ns2np1
The most likely charge on an ion formed by an element with a valence electron configuration of ns2np1 is +1.
Elements with a valence electron configuration of ns2np1, such as chlorine and iodine, have a tendency to gain one electron to achieve a stable octet configuration. This results in the formation of a negatively charged ion with a charge of -1. However, these elements can also lose one electron to achieve a stable configuration, which would result in a positively charged ion with a charge of +1. Since the tendency to gain an electron is stronger than the tendency to lose an electron, the most likely charge on an ion formed by such an element would be +1.
learn more about electron configuration
https://brainly.com/question/26084288
#SPJ11
The oceans hold ________ carbon than the atmosphere. A) 10,000 times more B) 50 times more C) 1000 times less D) 10,000 times less E) 5 times more
The oceans hold "A) 10,000 times more" carbon than the atmosphere.
This is because the oceans act as a large carbon sink, absorbing and storing significant amounts of carbon dioxide from the atmosphere.
In the deep waters of the ocean, coral reefs are found in abundance. Algae live on these coral reefs, providing nutrition and producing pigments that give color to the corals.
The corals offer shelter to the algae. So, they share a symbiotic association. Climate change has led to increased temperatures and has caused the corals to throw away the algae living inside them.
This action causes the corals to be bleached because of a lack of pigment. This change will lead to coral bleaching. The corals will die of lack of nutrition with time.
For more on oceans refer https://brainly.com/question/1675090
#SPJ11
The exponents m, n, and p in the rate law equation rate = k[A]^m [B]^n [C]^p ...: Select the correct answer below: A. always correlate to the coefficients of reactants A, B and C in the balanced chemical equation. B. are determined using the molecular masses of reactants A, B and C in the balanced chemical equation. C. are dependent on the temperature and surface area of reactants A, B and C. D. are determined experimentally by observing how the rate of reaction changes as the concentrations of the reactants are changed.
The correct answer is D that states that the rate law can only be determined experimentally and is specific to the reaction being studied.
The exponents m, n, and p in the rate law equation rate = [tex]k[A]^m [B]^n [C]^p[/tex] are determined experimentally by observing how the rate of reaction changes as the concentrations of the reactants are changed. The rate law shows how the rate of a chemical reaction is dependent on the concentrations of the reactants. It is important to note that the exponents in the rate law are not always the same as the coefficients of the reactants in the balanced chemical equation. Changes in temperature and surface area can also affect the rate of reaction, but these factors are not directly related to the exponents in the rate law equation.
To learn more about rate law click here https://brainly.com/question/30379408
#SPJ11
Indicate how you would distinguish between the following pairs of compounds by using infrared spectroscopy. (6 pts) A) 1-Hexyne and 2-Hexyne B) Diethylamine and Butylamine
Infrared (IR) spectroscopy is a useful technique for distinguishing between different compounds based on their unique vibrational frequencies. For the first pair of compounds, 1-hexyne, and 2-hexyne, the main difference lies in the position of the triple bond between the carbon atoms.
IR spectroscopy can be used to distinguish between the two isomers based on their C≡C stretching frequency. Specifically, 1-hexyne would show a higher C≡C stretching frequency compared to 2-hexyne due to the presence of the triple bond closer to the end of the molecule. For the second pair of compounds, diethylamine, and butylamine, IR spectroscopy can distinguish between them based on their different functional groups. Diethylamine contains an amino group (-NH2) while butylamine contains a longer alkyl chain. Therefore, diethylamine would show an N-H stretching frequency in the IR spectrum, while butylamine would show a C-H stretching frequency due to its longer alkyl chain.
To know more about spectroscopy
https://brainly.com/question/22509226
#SPJ11
Write a Prolog predicate intersection(L1,L2,L3) that is true if L3 is equal to the list containing intersection of the elements in L1 and L2 without any duplicates. In other words, L3 should contain the elements that both in L1 and in L2. The order of the elements in L3 should be the same as the order in which the elements appear in L1.
The predicate intersection/3 is used to find the intersection of two lists, L1 and L2, and store the result in another list L3.
What is intersection ?
Intersection is a set operation that is used to find the common elements between two or more sets. It is often represented using the symbol ∩. It is used to identify the elements common to two or more sets, and the result of an intersection is a set that contains only the elements that are common to all sets. For example, if we want to find the intersection of two sets A and B, we take the elements of set A and compare them to the elements of set B. The result will be a set containing only the elements that are common to both sets A and B.
The predicate intersection/3 can be defined as follows:
intersection([],_,[]).
intersection([Head|Tail],List2,[Head|Intersect]) :-
member(Head,List2),
intersection(Tail,List2,Intersect).
intersection([Head|Tail],List2,Intersect) :-
\+member(Head,List2),
intersection(Tail,List2,Intersect).
To learn more about intersection
https://brainly.com/question/29493390
#SPJ4
Name the synthetic polymer having repeated glucose units?
Answer: Cellulose
Explanation:
Cellulose is a polymer made with repeated glucose units bonded together by beta-linkages. Humans and many animals lack an enzyme to break the beta-linkages, so they do not digest cellulose. Certain animals, such as termites can digest cellulose, because bacteria possessing the enzyme are present in their gut.
Find the value of the equilibrium constant (Keq) and tel whether equilibrium lies to the left or the right. 2Fe (S) + 3H20 (g) +> Fe2O3 (s) + 3H2 (g)
At equilibrium (H2O] = 1.0 M, and [Hz] = 4.5 M.
1. The equilibrium constant for the reaction given that [H₂O] = 1 M and [H₂] = 4.5 M is 91.125
2. The equilibrium constant lies to the right
How do I determine the equilibrium constant?The following data were obtained from the question:
Equation: 2Fe(s) + 3H₂O(g) ⇌ Fe₂O₃(s) + 3H₂Concentration of water [H₂O] = 1 MConcentration of hydroge [H₂] = 4.5 MEquilibrium constant =?The equilibrium constant for the raection can be obtained as illustrated as follow:
Equilibrium constant = [Product]ᵐ / [Reactant]ⁿ
Equilibrium constant = [H₂]³ / [H₂O]³
Equilibrium constant = 4.5³ / 1³
Equilibrium constant = 91.125
From the above calculation, we can see that the equilibrium constant (i.e 91.125) is far greater than one. Thus, the equilibrium constant lies to the right.
Learn more about equilibrium constant:
https://brainly.com/question/16589765
#SPJ1
Which TWO problems did China face?
Warfare
Famines
Housing Shortages
The two problems china faced are warfare and famines.
Invasion and conflict have occurred frequently throughout Chinese history, making warfare a recurring theme. Since the Warring States era through the Opium Wars and the Chinese Civil War, China has faced both internal and external security threats frequently with severe human and financial costs.
Famines have also been a major issue in China, where a number of severe famines have resulted in widespread hunger and fatalities. For instance, it is estimated that between 15 and 45 million people died from starvation and other related causes during the Great Chinese Famine of 1959–1961.
The Great Famine of 1876–1879 and the Yangzi River flood in 1931, which also caused widespread famine, are other famines in Chinese history.
Learn more about Chinese Famine at:
brainly.com/question/30909746
#SPJ1
1. List the 3 eluents in order of increasing polarity. 2. Briefly explain why you selected the eluent you used to separate you you reject each of the other eluents? 3. Briefly describe the effect of the following procedural errors on are a. Spotting too much sample on the plate. b. Placing the spotted plate into a developing chamber containing an eluen origin. c. Allowing the plate to remain in the developing chamber until the eluent fronte top of the plate. d. Removing the plate from the developing chamber when the eluent front has moved my half-way up the plate. e. Developing the plate in an uncovered chamber. chamber until the eluent front reaches the
Three eluents in order of increasing polarity: hexane (least polar), ethyl acetate (moderately polar), and methanol (most polar).
Developing the plate in an uncovered chamber can lead to evaporation of the eluent, altering its composition and potentially affecting the separation of the compounds.
The choice of eluent depends on the polarity of the compounds being separated. If you selected ethyl acetate, it's likely because it provides optimal separation for your specific mixture. Hexane may not provide sufficient separation due to its low polarity, while methanol could be too polar, causing compounds to move too quickly and not separate properly.
Effects of procedural errors:
Spotting too much sample on the plate can lead to poor resolution and overlapping spots, making it difficult to analyze the results.
Placing the spotted plate into a chamber containing eluent at the origin can cause the sample to dissolve immediately, affecting the separation and resolution.
Allowing the plate to remain in the chamber until the eluent front reaches the top of the plate can result in poor separation, as all compounds may migrate with the solvent front.
Removing the plate when the eluent front has moved only halfway up the plate may provide insufficient separation and incomplete analysis of the components.
To learn more about Polarity Here:
https://brainly.com/question/1946554
#SPJ11
A sample of propane, C3H8 , contains 11.2 moles of carbon atoms. How many total moles of atoms does the sample contain?
A sample of propane, [tex]C_{3}H_{8}[/tex], containing 11.2 moles of carbon atoms has a total of 41.066 moles of atoms.
How to determine the total atoms in molecule?To know the total moles of atoms in a sample of propane, [tex]C_{3}H_{8}[/tex], containing 11.2 moles of carbon atoms.
Step 1: Determine the moles of carbon and hydrogen in propane.
The chemical formula for propane is [tex]C_{3}H_{8}[/tex]. This means there are 3 moles of carbon atoms and 8 moles of hydrogen atoms in 1 mole of propane.
Step 2: Calculate the moles of propane.
Since the sample contains 11.2 moles of carbon atoms and there are 3 moles of carbon atoms in 1 mole of propane, divide the moles of carbon by 3 to find the moles of propane.
11.2 moles of C / 3 moles of C per mole of propane = 3.7333 moles of propane
Step 3: Calculate the total moles of atoms in the sample.
Now that we know there are 3.7333 moles of propane, we can calculate the total moles of atoms in the sample. For each mole of propane, there are 3 moles of carbon and 8 moles of hydrogen, totaling 11 moles of atoms.
3.7333 moles of propane * 11 moles of atoms per mole of propane = 41.066 moles of atoms
To know more about Moles Calculations:
https://brainly.com/question/24168217
#SPJ11
give common names for the following compounds. (a) (ch3)2choch(ch3)ch2ch3 (b) (ch3)3coch2ch(ch3)2
(a) The compound (CH3)2CHOCH(CH3)CH2CH3 is commonly known as diisopropyl ether.
It is an ether compound formed by the condensation of two isopropyl (CH3)2CH- groups with an oxygen atom in the middle. Diisopropyl ether is a clear, colorless liquid with a characteristic ether-like odor. It is commonly used as a solvent in various chemical reactions and as an extraction solvent due to its low boiling point and good solubility for a wide range of organic compounds. Additionally, diisopropyl ether can be employed as a starting material for the synthesis of other organic compounds.
(b) The compound (CH3)3COCH2CH(CH3)2 is commonly known as tert-butyl isobutyl ketone or 2,6-dimethyl-4-heptanone.
It is a ketone compound consisting of a tert-butyl (CH3)3C- group attached to the carbonyl carbon of an isobutyl (CH3)2CH- group. The name "tert-butyl isobutyl ketone" reflects the presence of both functional groups and the specific arrangement of carbon atoms in the molecule. 2,6-dimethyl-4-heptanone highlights the positions and types of the carbon atoms in the compound. This ketone compound finds applications as a solvent, flavoring agent, and intermediate in organic synthesis.
To know more about ether please visit:
https://brainly.com/question/28047849
#SPJ11
If a solution containing 42.404 g of mercury(II) perchlorate is allowed to react completely with a solution containing 10.872 g of sodium dichromate, how many grams of solid precipitate will form
To determine the amount of solid precipitate that will form, we need to identify the limiting reactant first. balanced chemical equation for the reaction between mercury(II) perchlorate and sodium dichromate:
Hg(ClO4)2 + Na2Cr2O7 → HgCr2O7 + 2NaClO4
Next, we need to determine how many moles of each reactant we have:
moles of Hg(ClO4)2 = 42.404 g / (2 x 227.6 g/mol) = 0.0931 mol
moles of Na2Cr2O7 = 10.872 g / (2 x 297.8 g/mol) = 0.0183 mol
Now we can determine the limiting reactant. The reaction requires 1 mole of Hg(ClO4)2 to react with 1 mole of Na2Cr2O7, so we need to compare the moles of each reactant to see which one is in excess:
Hg(ClO4)2 : Na2Cr2O7 = 0.0931 mol : 0.0183 mol
Na2Cr2O7 is the limiting reactant because it is completely consumed in the reaction.
Finally, we can use the stoichiometry of the balanced equation to determine how many moles of solid precipitate (HgCr2O7) will be formed:
moles of HgCr2O7 = moles of Na2Cr2O7 = 0.0183 mol
Now we can find the mass of HgCr2O7 precipitated:
mass of HgCr2O7 = moles of HgCr2O7 x molar mass of HgCr2O7
= 0.0183 mol x 596.4 g/mol
= 10.9 g
Therefore, 10.9 g of solid precipitate (HgCr2O7) will form.
to know more about determine the amount of solid precipitate click this link-
brainly.com/question/30037483
#SPJ11
You mix a 125.0-mL sample of a solution that is 0.0117 M in NiCl2 with a 175.0-mL sample of a solution that is 0.250 M in NH3. After the solution reaches equilibrium, what concentration of Ni2 (aq) remains
If you mix a 125.0-mL sample of a solution that is 0.0117 M in NiCl[tex]_2[/tex] with a 175.0-mL sample of a solution that is 0.250 M in NH[tex]_3[/tex]. After the solution reaches equilibrium, the concentration of [tex]Ni^{2+}[/tex] (aq) remains is 1.28 x 1[tex]0^{-5}[/tex] M.
To answer this question, we need to use the equilibrium constant expression for the reaction between NiCl[tex]_2[/tex] and NH[tex]_3[/tex]:
NiCl[tex]_2[/tex](aq) + 4NH[tex]_3[/tex](aq) ⇌ [tex][Ni(NH_3)_4]^{2+}[/tex] (aq) + 2C[tex]l^-[/tex](aq)
The equilibrium constant expression is:
K = [tex][Ni(NH_3)_4]^{2+}[/tex] / ([NiCl[tex]_2[/tex]][tex][NH_3]^4[/tex])
We can use this expression to calculate the concentration of [tex]Ni^{2+}[/tex] at equilibrium. First, we need to determine the initial concentrations of NiCl[tex]_2[/tex] and NH[tex]_3[/tex]:
[NiCl[tex]_2[/tex]] = 0.0117 M
[NH[tex]_3[/tex]] = 0.250 M
Next, we need to determine the concentrations of [tex][Ni(NH_3)_4]^{2+}[/tex] and C[tex]l^-[/tex] at equilibrium. We can do this by using the stoichiometry of the reaction and the initial concentrations of NiCl[tex]_2[/tex] and NH[tex]_3[/tex]:
[tex][Ni(NH_3)_4]^{2+}[/tex] = x
[Cl-] = 2x
where x is the change in concentration of [tex][Ni(NH_3)_4]^{2+}[/tex] and C[tex]l^-[/tex] at equilibrium.
Now we can substitute these concentrations into the equilibrium constant expression:
K = [x] / (0.0117 M * 0.250 [tex]M^4[/tex]* [tex][2x]^2[/tex])
Simplifying this expression, we get:
K = x / (2.9297 x [tex]10^{-10}[/tex][tex]x^2[/tex])
Solving for x, we get:
x = 1.28 x [tex]10^{-5 }[/tex] M
Therefore, the concentration of [tex]Ni^{2+}[/tex] at equilibrium is:
[[tex]Ni^{2+}[/tex]] = [tex][Ni(NH_3)_4]^{2+}[/tex] = 1.28 x [tex]10^{-5 }[/tex] M
So, the answer is 1.28 x [tex]10^{-5 }[/tex] M.
Learn more about equilibrium at: https://brainly.com/question/10838453
#SPJ11
The ________ lattice is one of the seven primitive three-dimensional lattices in which the relationship between the lattice vectors a, b, and c can be written as: a b c
The FCC lattice is one of the seven primitive three-dimensional lattices in which the relationship between the lattice vectors a, b, and c can be written as: a = b = c
The face-centered cubic (FCC) lattice is a fundamental type of crystal lattice structure that is commonly found in metals such as copper, silver, and gold, as well as in many metallic compounds. It is one of the seven primitive three-dimensional lattices, and its symmetry and packing efficiency make it an important structure in the study of materials science and engineering.
In an FCC lattice, the atoms or ions are arranged in a pattern where each atom is surrounded by twelve nearest neighbors, forming a cubical symmetry with an atom at each corner and one in the center of each cube face. The relationship between the lattice vectors a, b, and c in an FCC lattice can be written as a = b = c.
The FCC lattice has several unique properties that make it useful in many applications. For example, it has a high packing density, which makes it an efficient structure for storing and transmitting information in electronic devices. It is also highly symmetric, which allows for the creation of highly ordered arrays of atoms or ions, making it useful in the design of catalysts and other materials with specific properties.
To know more about FCC lattice refer here:
https://brainly.com/question/21327238#
#SPJ11
Cuántos gramos de NaClO son necesarios para preparar 700 mL de una solución 0.5 M?
Na = 23g
Cl = 35.5
O = 16g
Redondea tu respuesta a 2 decimales. SIN UNIDAD
We need 26.08 grams of NaClO to prepare a 0.5 M solution in 700 mL of solution.
To calculate the amount of NaClO needed to prepare a 0.5 M solution in 700 mL of solution, we need to use the formula
moles = concentration (M) x volume (L)
First, we need to convert the volume of the solution to liters
700 mL = 0.7 L
Then, we can plug in the given concentration and volume into the formula and solve for moles
moles = 0.5 M x 0.7 L
moles = 0.35 mol
Now, we need to convert the moles of NaClO to grams. To do this, we need to use the molar mass of NaClO, which is
1 Na + 1 Cl + 1 O = 23 g + 35.5 g + 16 g = 74.5 g/mol
So, the mass of NaClO needed can be calculated as
mass = moles x molar mass
mass = 0.35 mol x 74.5 g/mol
mass = 26.08 g
To know more about solution here
https://brainly.com/question/12354820
#SPJ1
-- The given question in English is
"How many grams of NaClO are needed to prepare 700 mL of a 0.5 M solution?
Na = 23g
Cl = 35.5
O = 16g
Round your answer to 2 decimal places."--