Concentrations of Chemical Species Graded Question Consider sample of Sr(OH)2(aq) that was made by dissolving 0.305 g Sr(OH),(s) in enough water to make 200.0 mL of solution at 25°C. What is the concentration of Sr?+ (aq)? M What is the concentration of OH(aq) M What is the pH of the solution? report to at least 2 places after the decimal What is the pOH of the solution? report to at least 2 places after the decimal

The decreasing electronegativity difference is KI > HF > Br2.

The electronegativity difference is the difference in the electronegativity values of the atoms in a compound. The greater the difference, the more polar the bond and the greater the electron transfer from one atom to another. Therefore, to list the compounds in decreasing electronegativity difference.
We need to list the following compounds in decreasing order of electronegativity difference: Br2, HF, and KI.
To do this, let's first find the electronegativity values of the elements involved:
- Bromine (Br): 2.96
- Hydrogen (H): 2.20
- Fluorine (F): 3.98
- Potassium (K): 0.82
- Iodine (I): 2.66
Now, let's calculate the electronegativity differences for each compound:
1. Br2: |2.96 - 2.96| = 0.00
2. HF: |3.98 - 2.20| = 1.78
3. KI: |2.66 - 0.82| = 1.84
Now, we can list them in decreasing order of electronegativity difference:
KI > HF > Br2

For more such questions on electronegativity , Visit:

https://brainly.com/question/18258838

#SPJ11

The compounds recorded in diminishing electronegativity distinction are:

Br2 (bromine atom): Since bromine may be a halogen, it has tall electronegativity.

HF (hydrogen fluoride): Hydrogen and fluorine have a noteworthy electronegativity contrast due to fluorine's tall electronegativity.

KI (potassium iodide): The electronegativity distinction between potassium and iodine is littler than that between hydrogen and fluorine, so it includes a lower electronegativity contrast compared to HF.

Hence, the proper arrangement from most elevated to most reduced electronegativity contrast is Br2 > HF > KI.

Learn more about electronegativity here:

https://brainly.com/question/24977425

#SPJ4

An isotope with a low value of n/z (neutron-to-proton ratio) will generally decay through beta-plus decay or electron capture.

In both cases, the process aims to increase the neutron-to-proton ratio to reach a more stable state. Beta-plus decay involves the conversion of a proton into a neutron, releasing a positron and a neutrino in the process. In electron capture, a proton absorbs an inner-shell electron from the atom and transforms into a neutron, emitting a neutrino.

Both of these decay mechanisms are common in isotopes with a lower neutron-to-proton ratio, as they help achieve a more balanced and stable nucleus by reducing the number of protons and increasing the number of neutrons. This leads to a more stable atomic configuration, allowing the isotope to move closer to the band of stability on the nuclear chart. Overall, low neutron-to-proton ratio value isotopes tend to undergo beta-plus decay or electron capture to reach a more stable state.

Learn more about neutron-to-proton here:

https://brainly.com/question/1449700

#SPJ11

The concentration of the new solution is 0.48 M HCl

We need to use the formula for dilution:

C1V1 = C2V2

Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

In this case, we know that:

C1 = 12.0 M (since the initial solution is 12.0 M HCl)
V1 = 100.0 mL (since the initial volume is 100.0 mL)
V2 = 2.50 L (since the final volume is 2.50 L)

To find C2, we need to rearrange the formula:

C2 = (C1V1) / V2

Plugging in the values we know, we get:

C2 = (12.0 M x 100.0 mL) / 2.50 L

Simplifying this expression, we get:

C2 = 0.48 M

Therefore, the concentration of the new solution is 0.48 M HCl.

In general, dilution is a process of reducing the concentration of a solution by adding more solvent (usually water) to it. In this case, the student started with a very concentrated solution of 12.0 M HCl, but by diluting it with more water, they were able to create a solution that was much less concentrated (0.48 M HCl).

know more about dilution here:

https://brainly.com/question/27097060

#SPJ11

To determine the number of moles in [tex]8.42 * 10^2^2[/tex] representative particles of iron (III) oxide, you need to use Avogadro's number and the molar mass of iron (III) oxide and gives approximately 0.139 moles of iron (III) oxide.

To calculate the number of moles, you first need to understand Avogadro's number, which is approximately [tex]6.022 * 10^2^3[/tex] representative particles per mole. This number allows us to convert between the number of representative particles and the number of moles.

Next, you need to determine the molar mass of iron (III) oxide, which is [tex]Fe_2O_3[/tex]. Iron (III) oxide consists of two iron atoms (Fe) and three oxygen atoms (O). The atomic mass of iron (Fe) is approximately 55.85 g/mol, and the atomic mass of oxygen (O) is approximately 16.00 g/mol. Adding these masses together, you get a molar mass of approximately 159.69 g/mol for iron (III) oxide.

Now, we can calculate the number of moles by dividing the given number of representative particles [tex](8.42 * 10^2^2)[/tex] by Avogadro's number [tex](6.022 * 10^2^3)[/tex]. This calculation gives you approximately 0.139 moles of iron (III) oxide.

Learn more about Avogadro's number here:

https://brainly.com/question/28812626

#SPJ11

The order of ionic compounds by lattice energy from highest to lowest is CaO > AlCl₃ > MgO > NaCl. Lattice energy is a measure of the strength of the electrostatic forces holding the ions in an ionic compound together.

The greater the lattice energy, the stronger the ionic bond. The lattice energy depends on the charge and size of the ions in the compound. The smaller the size of the ions and the higher the charge, the greater the lattice energy.

The following ionic compounds are listed in order of increasing lattice energy:
1. NaCl (sodium chloride)
2. MgO (magnesium oxide)
3. AlCl₃ (aluminum chloride)
4. CaO (calcium oxide)

The highest lattice energy is found in CaO, followed by AlCl3, MgO, and NaCl.
CaO has the highest lattice energy due to the smaller size of its ions and the higher charge on the ions. Calcium ions (Ca⁺) are smaller than sodium ions (Na⁺) and magnesium ions (Mg²⁺), and oxygen ions (O²⁻) are smaller than chloride ions (Cl-). The higher charge on the ions in CaO also contributes to the higher lattice energy.

AlCl₃ has the second highest lattice energy due to the small size of the ions and the high charge on the aluminum ion (Al³⁺). MgO has the third highest lattice energy due to the smaller size of the ions compared to NaCl. NaCl has the lowest lattice energy due to the larger size of the ions and the lower charge on the ions.

In summary, the order of ionic compounds by lattice energy from highest to lowest is CaO > AlCl₃ > MgO > NaCl.

To know more about lattice energy, refer

https://brainly.com/question/13169815

#SPJ11

Assuming same density and heat capacity for final solutions as water in calorimetry is valid in certain cases.

When performing calorimetry experiments, it is common to assume that the final solutions have the same specific heat and density as pure water.

This is based on the fact that water is a common solvent and is often used as a reference point in such experiments.

In some cases, this assumption may be valid, especially if the solutes in the initial solutions are relatively small and do not significantly alter the properties of the solvent.

However, it is important to consider the composition of the initial solutions and any changes that occur during the reaction.

If there are significant changes in the properties of the solution, such as the addition of large molecules or changes in pH, then the assumption of identical properties to water may not be valid.

For more such questions on density, click on:

https://brainly.com/question/26364788

#SPJ11

The specific heat and density of a solution are dependent on its composition. However, in this experiment, we assumed that the final solutions of all three reactions had the same specific heat and density as pure water. This assumption is valid if the composition of the final solutions is close to that of pure water.

The validity of this assumption can be assessed by considering the complete composition of the solutions before and after the reactions. For instance, KCl and NaOH are both salts that dissolve in water to produce aqueous solutions. Acetic acid is a weak acid that also dissolves in water. When these substances dissolve in water, they form ions that are surrounded by water molecules, which affects the heat capacity and density of the solution.
Therefore, if the final solutions after the reactions were significantly different from pure water in terms of their composition, our assumption would not be valid. In such a case, we would have to measure the specific heat and density of the final solutions accurately. However, for these particular reactions, the assumption is reasonable since the final solutions are similar in composition to pure water.

learn more about specific heat Refer: https://brainly.com/question/11297584

#SPJ11

To calculate the mass of silver that can be plated onto an object from a silver nitrate solution, we need to use the formula:

Mass of silver = (Current x Time x Atomic weight of silver) / (Number of electrons transferred x Faraday's constant)
We are given the current (8.70 A) and time (33.5 minutes = 2010 seconds). The atomic weight of silver is 107.87 g/mol and the number of electrons transferred is 1. Faraday's constant is 96,485 C/mol.
Substituting these values into the formula, we get:
Mass of silver = (8.70 A x 2010 s x 107.87 g/mol) / (1 x 96,485 C/mol)
Mass of silver = 0.326 g

Therefore, the correct answer is C. 0.326 g.

To know more about silver nitrate solution visit:

https://brainly.com/question/29119777

#SPJ11

The correct cell notation for the given reaction is: [tex]Al(s)|Al3+(aq)||Au3+(aq)|Au(s).[/tex]

The correct cell notation for the given redox reaction is:

[tex]Al(s)|Al3+(aq)||Au3+(aq)|Au(s)[/tex]

The cell notation consists of three parts: the anode, the cathode, and the salt bridge.

The anode is where oxidation occurs, while the cathode is where reduction occurs.

The salt bridge is used to maintain charge balance in the two half-cells.

In the given reaction, [tex]Al[/tex] is oxidized to [tex]Al3+[/tex] at the anode, while [tex]Au3+[/tex] is reduced to Au at the cathode.

Therefore, [tex]Al(s)[/tex] represents the anode and [tex]Au(s)[/tex]represents the cathode.

The ions in solution are represented with their respective charges in parentheses: [tex]Al3+(aq)[/tex] and [tex]Au3+(aq)[/tex].

The double vertical lines "||" represent the salt bridge, which is used to maintain charge neutrality in the two half-cells.

In this case, the salt bridge would contain an electrolyte that allows ions to pass through it, such as [tex]KCl[/tex]or [tex]NaNO3[/tex].

Therefore, the correct cell notation for the given redox reaction is:

[tex]Al(s)|Al3+(aq)||Au3+(aq)|Au(s)[/tex]

Learn more about cell notation

brainly.com/question/31649687

#SPJ11

The product of the first step using potassium hydroxide (KOH) is an alkoxide intermediate. When KOH is added to the starting compound, it will deprotonate the acidic proton to form the alkoxide intermediate. This is because KOH is a strong base that can easily abstract a proton from the starting compound.

The alkoxide intermediate is then used in the second step of the transformation, where it reacts with peracetic acid to form the desired product. This second step involves an intramolecular cyclization reaction, where the alkoxide attacks the peracetic acid, leading to the formation of a cyclic compound.The first step involves the reaction of the starting compound with KOH. Potassium hydroxide is a strong base, so it will deprotonate the most acidic hydrogen in the compound, usually found on an alcohol (OH) group or another acidic group.

After the deprotonation, the resulting negatively charged oxygen (O-) will be stabilized by the potassium ion (K+), forming the deprotonated alcohol (also known as alkoxide) as the product of the first step. Remember to consider the specific structure of the starting compound when drawing the deprotonated alcohol product.

To know more about potassium hydroxide visit

https://brainly.com/question/21904397

#SPJ11

Primary source documents that can confirm the use of buttonhooks in the medical inspection of immigrants include medical reports and journals, photographs, and immigration records.

To confirm the use of buttonhooks in the medical inspection of immigrants, one can refer to primary sources such as medical reports and journals from the early 20th century.

These documents may contain descriptions of the medical examinations performed on immigrants and the tools used during the process. Photographs taken during this time may also provide evidence of the use of buttonhooks or other medical instruments.

Additionally, immigration records from the time may contain information on the medical inspections conducted on immigrants, including details on the tools used.

By consulting a variety of primary source materials, researchers can gather evidence that supports the historical use of buttonhooks in the medical inspection of immigrants.

Learn more about immigrants here.

https://brainly.com/questions/13688875

#SPJ11

True.Soils in the aquic moisture regime, also known as Aquepts, are characterized by frequent saturation or flooding due to high groundwater tables or poor drainage.

These soils tend to have a high water content, making them soft and easy to compact, which is ideal for recreational paths and trails. Aquepts are also known for their high nutrient content, making them fertile and able to support a variety of plant life, including grasses, shrubs, and trees.

This plant growth helps stabilize the soil and reduce erosion, making it an even more suitable surface for recreational use. Additionally, the high water content of these soils means that they are more resistant to compaction and damage from foot traffic, further enhancing their suitability for paths and trails. Overall, the characteristics of soils in the aquic moisture regime make them well-suited for recreational use.

To know more about Aquepts refer to

https://brainly.com/question/14122619

#SPJ11

The approximate atomic mass of a positron is 0.00054858 atomic mass units (amu). This is because the mass of a positron is equal to the mass of an electron, but with a positive charge.

Therefore, it has the same mass number as an electron, which is approximately 0.00054858 amu. So the atomic mass of a positron is very small, but not negative or zero.

The positron is indeed the antimatter equivalent of an electron. Its approximate atomic mass is essentially the same as an electron, which is about 9.109 x 10^-31 kg. The correct answer is not provided in the given options, so the appropriate response would be: None of the above.

To know more about atomic mass visit:-

https://brainly.com/question/5661976

#SPJ11

The new pH is 1.09 .

The dissociation of chlorous acid is:

HClO2 + H2O ⇌ H3O+ + ClO2-

The Ka expression for chlorous acid is:

Ka = [H3O+][ClO2-]/[HClO2]

The pKa for chlorous acid is 2.0, so:

pKa = -log(Ka)

2.0 = -log(Ka)

Ka = 10⁻²

a. Using the given concentrations, we can calculate the initial concentration of HClO2 and ClO2-:

[HClO2] = 0.10 M

[ClO2-] = 0.15 M

The initial concentration of H3O+ is zero, so we can assume that x is the concentration of H3O+ that forms:

[H3O+] = x

The concentration of ClO2- that forms is also x, so:

[ClO2-] = x

The concentration of HClO2 that dissociates is (0.10 - x), so:

[HClO2] = 0.10 - x

Using the Ka expression and the given pKa value, we can set up the following equation:

Ka = [H3O+][ClO2-]/[HClO2]

10⁻² = x² / (0.10 - x)

Solving for x gives:

x = 3.16 × 10⁻² M

Therefore, the pH of the solution is:

pH = -log[H3O+]

pH = -log(3.16 × 10⁻²)

pH = 1.50

This answer makes sense since the pH is less than 2.0, indicating that the solution is acidic and the majority of the chlorous acid is undissociated.

b. Adding 0.050 moles of HCl(aq) to the solution will increase the concentration of H3O+ by:

Δ[H3O+] = 0.050 mol / 1.00 L

Δ[H3O+] = 0.050 M

The reaction that occurs is:

HCl(aq) + H2O(l) → H3O+(aq) + Cl-(aq)

This will cause the concentration of HClO2 to decrease by 0.050 M and the concentration of ClO2- to decrease by 0.050 M. Therefore, the new concentrations are:

[HClO2] = 0.10 M - 0.050 M

             = 0.050 M

[ClO2-] = 0.15 M - 0.050 M

            = 0.100 M

Using the Ka expression and the new concentrations, we can calculate the new concentration of H3O+:

Ka = [H3O+][ClO2-]/[HClO2]

10⁻² = x² / (0.050)

x = 3.16 × 10⁻² M + 0.050 M

x = 8.16 × 10⁻² M

Therefore, the new pH is:

pH = -log[H3O+]

pH = -log(8.16 × 10⁻²)

pH = 1.09.

To know more about dissociation refer here

brainly.com/question/30961097#

#SPJ11

To determine the moles of oxygen produced when 60.1 g of potassium chlorate (KClO3) completely decomposes, first find the moles of KClO3, then use the balanced chemical equation to find the moles of oxygen (O2).

The balanced equation for the decomposition of potassium chlorate is:

2 KClO3 → 2 KCl + 3 O2

Now, calculate the moles of KClO3:

Molar mass of KClO3 = 39.10 (K) + 35.45 (Cl) + 3 * 16.00 (O) = 122.55 g/mol

moles of KClO3 = mass / molar mass = 60.1 g / 122.55 g/mol ≈ 0.490 moles

Using the stoichiometry from the balanced equation:

moles of O2 = (3/2) * moles of KClO3 = (3/2) * 0.490 moles ≈ 0.735 moles

When 60.1 g of potassium chlorate completely decomposes, approximately 0.735 moles of oxygen gas are formed.

learn more about moles

https://brainly.in/question/15416344?referrer=searchResults

#SPJ11

The hydrocarbon reactant is classified as unsaturated polyvinyl due to the presence of double bonds in its molecular structure, which enables further reactions and polymerization.

The hydrocarbon reactant is classified as unsaturated polyvinyl due to its chemical bonding properties. "Unsaturated" refers to the presence of multiple bonds between carbon atoms in the hydrocarbon molecule. These multiple bonds can be either double bonds or triple bonds, which are formed by the sharing of electrons between the carbon atoms.

In the case of polyvinyl, it is a polymer consisting of repeating vinyl monomer units. The vinyl monomer contains a double bond between two carbon atoms, which makes it unsaturated.

The unsaturated nature of the vinyl monomer allows for further chemical reactions to occur, such as polymerization, where the double bond can undergo additional reactions with other molecules or monomers. This leads to the formation of a long chain of repeating vinyl units, resulting in the polymer known as polyvinyl.

To learn more about hydrocarbon reactants

https://brainly.com/question/27955323

#SPJ4

The temperature (in kelvin) of a 1.50 mol of a sample of a gas 1.25 atm and a volume of 14 L is 142.1 K

The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as

                                 PV = nRT

where,

P = Pressure

V = Volume

T = Temperature

n = number of moles

Given,

number of moles = 1.5 moles

pressure = 1.25 atm

volume = 14 L

PV = nRT

1.25 × 14 = 1.5 × 0.0821 × T

T = 142.1 K

Learn more about Ideal Gas law, here:

https://brainly.com/question/28257995

#SPJ1

The standard cell potential for the given redox reaction is +3.00 V.

The standard cell potential, ∘cell, can be calculated using the formula:

∘cell = ∘reduction (cathode) - ∘oxidation (anode)

The oxidation half-reaction is:

Pb(s) → [tex]Pb^{2+}[/tex](aq) + 2e– (reversed because it's an oxidation)

The reduction half-reaction is:

[tex]F_2[/tex](g) + 2e– → [tex]2F^-[/tex](aq)

The standard cell potential can be calculated as follows:

∘cell = ∘reduction (cathode) - ∘oxidation (anode)

∘cell = +2.87 V - (-0.13 V) (Note that the Pb reaction is reversed)

∘cell = +3.00 V

For more question on standard cell potential click on

https://brainly.com/question/14172081

#SPJ11

The standard cell potential, E°cell, for the equation Fe(s) + F2(g) → Fe2+(aq) + 2F−(aq) is +2.87 V.

The standard cell potential, E°cell, can be calculated using the formula E°cell = E°reduction (reduced form) - E°reduction (oxidized form). In this case, we need to look up the reduction potentials for Fe2+ and F2 in the standard reduction potential table.

The reduction potential for Fe2+ is +0.44 V, and the reduction potential for F2 is +2.87 V. To get the oxidation potential for Fe(s), we need to flip the sign of the reduction potential for Fe2+.

Therefore, E°oxidation for Fe(s) is -0.44 V. Substituting these values into the formula, we get:

E°cell = E°reduction (reduced form) - E°reduction (oxidized form)

E°cell = (+0.44 V) - (-2.87 V)

E°cell = +2.87 V

Therefore, the standard cell potential, E°cell, for the given reaction is +2.87 V. This means that the reaction is spontaneous and can produce an electric current when a cell is constructed with Fe(s) as the anode and F2(g) as the cathode.

Learn more about standard cell potential here :

https://brainly.com/question/29797132

#SPJ11

The given statement "[tex]P_{4}O_{6}[/tex] and [tex]P_{4}O_{10}[/tex] are allotropes of phosphorus" is True. [tex]P_{4}O_{6}[/tex] and [tex]P_{4}O_{10}[/tex] are two allotropes of phosphorus oxide, which is a compound formed by the combination of phosphorus and oxygen.

[tex]P_{4}O_{6}[/tex] has four phosphorus atoms and six oxygen atoms, while [tex]P_{4}O_{10}[/tex] has four phosphorus atoms and ten oxygen atoms.

These two allotropes have different molecular structures and physical properties.

[tex]P_{4}O_{6}[/tex] is a white or yellowish solid that is highly reactive with water and air, while [tex]P_{4}O_{10}[/tex] is a white crystalline solid that is less reactive than [tex]P_{4}O_{6}[/tex]. Both allotropes have various industrial and chemical applications.

To know more about allotropes, refer here:

https://brainly.com/question/13058829#

#SPJ11

The pH of the solution is approximately 3.77.

To calculate the pH of the given solution, we'll need to use the Henderson-Hasselbalch equation, which is:

pH = pKa + log ([A-]/[HA])

In this problem, benzoic acid (C₆H₅COOH) is the weak acid (HA) and sodium benzoate (C₆H₅COONa) is the conjugate base (A-).

The Ka of benzoic acid is 6.30 × 10⁻⁵, and the pKa can be calculated as:

pKa = -log(Ka) = -log(6.30 × 10⁻⁵) ≈ 4.20

Now, we have 0.42 mol of benzoic acid (HA) and 0.151 mol of sodium benzoate (A⁻) in a 1.00 L solution.

We can find their concentrations:

[HA] = 0.42 mol / 1.00 L = 0.42 M [A⁻] = 0.151 mol / 1.00 L = 0.151 M

Applying the Henderson-Hasselbalch equation:

pH = 4.20 + log (0.151 / 0.42) ≈ 3.77

Learn more about pH at

https://brainly.com/question/24052816

#SPJ11

To calculate the pH of a 7.75x10^-12 M Hydrobromic acid (HBr) solution, we need to first write the dissociation equation for HBr in water:

HBr + H2O → H3O+ + Br-

The equilibrium constant expression for this reaction is:

Ka = [H3O+][Br-]/[HBr]

Since we know the concentration of HBr, we can use the value of Ka to calculate the concentration of H3O+ in the solution, which will then give us the pH. The value of Ka for HBr is 8.7x10^-9.

Let x be the concentration of H3O+ in the solution. Then, we can write:

8.7x10^-9 = x^2/7.75x10^-12

Solving for x, we get:

x = 2.6x10^-6 M

Therefore, the pH of the solution is:

pH = -log[H3O+] = -log(2.6x10^-6) = 5.59

Since the pH is less than 7, the solution is acidic.

Therefore, the pH of the 7.75x10^-12 M Hydrobromic acid solution is 5.59 and the solution is acidic.

learn more about ph here:brainly.com/question/2288405

#SPJ11

Theoretical yield of triphenylmethanol for the overall conversion of bromobenzene to triphenylmethanol is 11.19 g.

To calculate the theoretical yield of triphenylmethanol, we need to first determine the limiting reagent in the reaction between phenylmagnesium bromide and methyl benzoate. The balanced chemical equation is:

C6H5MgBr + C6H5COOCH3 → C6H5COOC6H5MgBr

C6H5COOC6H5MgBr + H2O → C6H5OH + C6H5COOH + MgBrOH

The molar ratio between phenylmagnesium bromide and triphenylmethanol is 1:1, meaning that the moles of phenylmagnesium bromide used is equal to the moles of triphenylmethanol produced.

Using the given quantities of 1 g of magnesium and 4.5 mL of bromobenzene, we can calculate the moles of phenylmagnesium bromide produced:

molar mass of Mg = 24.31 g/mol

moles of Mg = 1 g / 24.31 g/mol = 0.041 moles

density of bromobenzene = 1.49 g/mL

mass of bromobenzene = 4.5 mL * 1.49 g/mL = 6.7 g

moles of bromobenzene = 6.7 g / 157.01 g/mol = 0.043 moles

moles of phenylmagnesium bromide = 0.043 moles (1:1 molar ratio)

Next, we need to calculate the moles of triphenylmethanol that can be produced from the moles of phenylmagnesium bromide:

moles of phenylmagnesium bromide = 0.043 moles

moles of triphenylmethanol = 0.043 moles (1:1 molar ratio)

Finally, we can calculate the theoretical yield of triphenylmethanol:

molar mass of triphenylmethanol = 260.34 g/mol

theoretical yield of triphenylmethanol = 0.043 moles * 260.34 g/mol = 11.19 g

Therefore, the theoretical yield of triphenylmethanol for the overall conversion of bromobenzene to triphenylmethanol is 11.19 g.

Learn more about moles at: https://brainly.com/question/14485544

#SPJ11

Phenolphthalein is an effective pH indicator because equivalence points in titrations are marked by the analyte changing in color from Colourless in acidic and neutral solutions, to Pink in basic solutions

Phenolphthalein is a commonly used pH indicator in acid-base titrations because of its effectiveness in marking equivalence points.

The equivalence point is the point at which the number of moles of acid is equal to the number of moles of base in a titration.

Phenolphthalein changes color depending on the pH of the solution it is in. In acidic and neutral solutions, phenolphthalein is colorless. However, in basic solutions, it turns pink.

This makes it easy to determine when the titration has reached its endpoint, which is the equivalence point.

The change in color from colorless to pink is a clear indication that the solution has become basic and the amount of acid is now equal to the amount of base.

In summary, phenolphthalein is an effective pH indicator because it changes color from colorless to pink at the equivalence point, marking the end of the titration.

Know more about Titration here :

brainly.com/question/2728613

#SPJ11

According to forces of attraction, the elements with lowest to highest melting point are Br₂<ICI< Cl.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

The physical properties such as melting point, boiling point, density  are all dependent on forces of attraction which exists in the substances.

Learn more about forces of attraction,here:

https://brainly.com/question/14365107

#SPJ1

A buffered aqueous solution can be formed by the pair H₃PO₄ and NaH₂PO₄. These substances can create a buffer because H₃PO₄ is a weak acid and NaH₂PO₄ is its corresponding conjugate base, allowing the solution to resist changes in pH.

A buffer solution is a solution with a static pH, i.e. its pH doesn't change even on the addition of a small amount of acid or base.  It is a water solvent-based solution which consists of a mixture containing a weak acid and the conjugate base of the weak acid or a weak base and the conjugate acid of the weak base. They resist a change in pH upon dilution or upon the addition of small amounts of acid/alkali to them.

To know more about buffer solution here

https://brainly.com/question/32095391

#SPJ4

The complex ions that will be paramagnetic [fe(h2o)6]3 (low spin) which is option D.

A paramagnetic is a substances that is attracted to magnetic field.

A complex ions is paramagnetic when it has one or more unpaired irons. The presence of unpaired electrons is typically due to the presence of partially filed d orbitals in metal ion.

Paramagnetism arises from the presence of unpaired electron in the substance, which causes magnetic moments of individual to add up and alligned to magnetic field , resulting in overall attraction.

Learn more about paramagnetic below.

https://brainly.com/question/2272751

#SPJ1

The reaction that occurs at the anode in the galvanic cell represented by Cu | Cu²⁺ || Ag⁺ | Ag is option A) Cu(s) → Cu²⁺(aq) + 2e⁻.

In a galvanic cell, the anode is the electrode where oxidation occurs. It is the site of electron loss and is negatively charged. In the given shorthand representation, the anode is represented on the left side with the symbol "Cu" indicating a copper electrode.

The anode reaction involves the conversion of the solid copper (Cu) electrode to copper ions (Cu²⁺) in the solution by losing two electrons (2e⁻). The reaction is represented as Cu(s) → Cu²⁺(aq) + 2e⁻, which is option A.

On the other hand, at the cathode, reduction occurs, which is the gain of electrons and is positively charged. In the given shorthand representation, the cathode is represented on the right side with the symbol "Ag" indicating a silver electrode.

Therefore, in the given galvanic cell, the reaction at the anode is the oxidation of copper, as stated in option A) Cu(s) → Cu²⁺(aq) + 2e⁻.

Learn more about galvanic cell here:

https://brainly.com/question/29784742

#SPJ11

The translational partition function for H2 confined to a volume of 126 cm³ at 298 K is 1.06  × 10⁴⁴.

To evaluate the translational partition function for H2 confined to a volume of 126 cm³ at 298 K, we can use the following formula:

Qtrans = (V/(λ³)) * ((2πmkT)/[tex](h^{2})^{\frac{3}{2} }[/tex]

Where V is the volume of the container, λ is the thermal de Broglie wavelength of the molecule, m is the mass of the molecule, k is the Boltzmann constant, T is the temperature, and h is the Planck constant.

For H2, the mass is 2.016 g/mol or 0.002016 kg/mol. The thermal de Broglie wavelength can be calculated using the formula:

λ = h / √(2πmkT)

Plugging in the values, we get:

λ = (6.626 ×10⁻³⁴ J s) / √(2π(0.002016 kg/mol)(1.38 × 10⁻²³ J/K)(298 K))

λ ≈ 2.47 × 10⁻¹⁰ m

Converting the volume of the container from cm³ to m³, we get:

V = 126 cm³ = 1.26 × 10⁻⁴ m³

Now we can calculate the translational partition function using the formula:

Qtrans = (V/(λ³)) × ((2πmkT)/[tex](h^{2})^{\frac{3}{2} }[/tex]

Qtrans = ((1.26 × 10⁻⁴ m³)/(2.47 × 10⁻¹⁰ m)³) × ((2π(0.002016 kg/mol)(1.38 × 10⁻²³ J/K)(298 K))/(6. 626 × 10⁻³⁴ J s)²)^(3/2)

Qtrans ≈ 1.06  × 10⁴⁴

Therefore, the translational partition function for H2 confined to a volume of 126 cm³ at 298 K is approximately 1.06  × 10⁴⁴.

Learn more about partition function: https://brainly.com/question/31440337

#SPJ11

From all the information given, we find that the theoretical yield of Na2CO3 is approximately 1.048 g.

To find the theoretical yield of Na2CO3, we start by converting the given mass of NaHCO3 to moles. The molar mass of NaHCO3 is 84.01 g/mol. Therefore, the number of moles of NaHCO3 can be calculated as:

moles of NaHCO3 = mass of NaHCO3 / molar mass of NaHCO3

moles of NaHCO3 = 1.662 g / 84.01 g/mol

By performing this calculation, we find that the number of moles of NaHCO3 is approximately 0.01978 mol.

Next, we use the stoichiometric ratio from the balanced equation to determine the moles of Na2CO3 produced. From the equation, we can see that 2 moles of NaHCO3 produce 1 mole of Na2CO3. Therefore:

moles of Na2CO3 = moles of NaHCO3 / stoichiometric ratio

moles of Na2CO3 = 0.01978 mol / 2

This gives us the number of moles of Na2CO3, which is approximately 0.00989 mol.

Finally, we convert the moles of Na2CO3 back to grams by multiplying by its molar mass:

mass of Na2CO3 = moles of Na2CO3 * molar mass of Na2CO3

mass of Na2CO3 = 0.00989 mol * 105.99 g/mol

By performing this calculation, we find that the theoretical yield of Na2CO3 is approximately 1.048 g.

To learn more about molar mass click here, brainly.com/question/31545539

#SPJ11

1.The equilibrium expression is; Keq = [CO]^4 [Hb(O2)4]/Hb(CO)4  [O2]^4

2. The equilibrium constant is 1.56

3. The potential energy diagram is shown in the image attached.

We have; Keq = [CO]^4 [Hb(O2)4]/Hb(CO)4 + [O2]^4

Keq = 0.1 * (0.25)^4/(0.15)^4 * 0.5

Keq = 3.9 * 10^-4/2.5 * 10^-4

Keq = 1.56

The equilibrium constant expression indicates the ratio of the concentrations of products to reactants, each raised to the power of their respective stoichiometric coefficients. The exponents in the expression reflect the stoichiometry of the balanced chemical equation, ensuring that the equation correctly represents the reaction.

Learn more about equilibrium expression:https://brainly.com/question/32224124

#SPJ1

The value of Kc at 25°C for the reaction using the equilibrium constant expression, the values of the equilibrium concentrations and the gas constant, is6.11 x 10∧8. The correct answer is option d) 6.11 x 108.

To determine the value of Kc at 25°C for the given reaction, we first need to write the balanced equation and then calculate the concentrations of all species involved. The balanced equation is 2H2O + 2Cl2 4H+ + 4Cl- + O2.

Assuming that the initial concentrations of H2O, Cl2, H+, Cl-, and O2 are all equal to x, the equilibrium concentrations will be (2x - y) for H2O, (2x - y) for Cl2, (4y) for H+, (4y) for Cl-, and (y) for O2. Here, y represents the amount of O2 formed at equilibrium.

The equilibrium constant expression for the given reaction is Kc = [H+]^4[Cl-]^4[O2]/[H2O]^2[Cl2]^2. Substituting the equilibrium concentrations in the expression, we get Kc = (4y)^4(y)/((2x - y)²)²(2x - y)²(2x - y)².

At equilibrium, the number of moles of O2 formed is equal to the number of moles of Cl2 reacted, which is (2x - y) moles. Therefore, the expression for Kc becomes Kc = (4y)^4(y)/(2x - y)^4(2x - y)²(2x - y)².

At 25°C, the value of the gas constant R is 8.314 J/mol*K. The value of Kc can be calculated using the equilibrium constant expression and the values of the equilibrium concentrations and the gas constant. The correct answer is option d) 6.11 x 108.

More on equilibrium: https://brainly.com/question/13397360

#SPJ11