The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon 2 with carbon 5 .
Option 1 is correct..
In its linear form, fructose has a ketone functional group on carbon 2 and five hydroxyl groups. In aqueous solutions, fructose can undergo a reversible intramolecular reaction between the ketone group and one of the hydroxyl groups, resulting in the formation of a cyclic hemiketal ring.
The furanose form of fructose is an important carbohydrate molecule that plays a key role in many biological processes, such as energy metabolism and signal transduction. It is also used as a sweetener in various food and beverage products. Correct option is: 1.
To know more about hemiketal ring, here
brainly.com/question/13063932
#SPJ4
-- The complete question is, Complete the statement: The furanose form of fructose is generated by formation of a hemiketal involving the attack of the hydroxyl group on carbon _____ with carbon _____.
1. 5; 2
2. 2; 6
3. 6; 1
4. 6; 2 --
if a beam of singly ionized carbon atoms ( 12c and 14c ) is injected into the same mass spectrometer as the uranium ions (with the same speed), will the spacing between the carbon ions be greater than, less than, or equal to the spacing between the uranium ions?
The spacing between the carbon ions will be equal to the spacing between the uranium ions, as both ions have the same speed. The same mass spectrometer will measure both ions in the same way, regardless of their mass.
Explanation: When a beam of singly ionized carbon atoms ( 12c and 14c ) is injected into the same mass spectrometer as the uranium ions (with the same speed), the spacing between the carbon ions will be greater than the spacing between the uranium ions.What is a mass spectrometer?A mass spectrometer is an instrument used to calculate the masses of ions, which are used to distinguish one substance from another. A beam of ions with the same speed is injected into the mass spectrometer.The spacing between carbon ions is greater than the spacing between uranium ions. The mass of the carbon ions is less than the mass of the uranium ions, despite the fact that they have the same velocity.Therefore, according to the formula, force = mass x acceleration, the acceleration of carbon ions is greater than that of uranium ions because the force they receive is the same. As a result, carbon ions have a greater deflection than uranium ions. The spacing between carbon ions is greater than the spacing between uranium ions.
For more such questions on uranium
https://brainly.com/question/29205436
#SPJ11
Determine the kinds of intermolecular forces that are present in each of the following elements or compounds. HF dispersion forces dipole-dipole forces dispersion forces and dipole-dipole forces dispersion forces, dipole-dipole forces and hydrogen bonding
For HF, there are dispersion forces and dipole-dipole forces present.
Intermolecular forces are forces that arise as a result of interactions between similar molecules. Dipole-dipole attraction is the dipole attraction that occurs between polar molecules and/or solid, liquid, and solution states.
Inter-dipole attraction occurs due to the presence of dipoles in molecules and has a stronger attraction than the London force. example: Intermolecular forces of HCl.
For dispersion forces and dipole-dipole forces, there are both dispersion forces and dipole-dipole forces present. For dispersion forces, dipole-dipole forces and hydrogen bonding, there are dispersion forces, dipole-dipole forces and hydrogen bonding present.
Learn more about kinds of intermolecular: brainly.com/question/8623963
#SPJ11
According to avogadros law, what do equal volumes of ideal gases at the same temperature and pressure contain?
A protons
B neutrons
C electrons
D particles
Answer:
D - particles.
Explanation:
I took the same test.
How would poisoning proton pumps impact anion uptake? a. It would decrease the uptake of anions via cotransport with protons.b. It would have no effect; most anions utilize ATP-driven pumps for uptake.c. It would decrease the uptake of anions by passive diffusion.d. It would increase the uptake of anions via cotransport with protons.
Poisoning proton pumps impact anion uptake in such a way that It would decrease the uptake of anions by passive diffusion.
What is passive diffusion ?The process by which molecules diffuse from a region of higher concentration to a region of lower concentration is known as passive diffusion. It is the most important mechanism for drug passage across membrane.
Diffusion is the net movement of material from a high concentration area to a low concentration area. The concentration gradient is the difference in concentration between the two areas, and diffusion will continue until this gradient is eliminated. Because diffusion transports materials from a high concentration area to a low concentration area
to know more about passive diffusion , visit ;
brainly.com/question/1304999
#SPJ1
A company with a large fleet of cars hopes to keep gasoline costs down and sets a goal of attaining a fleet average of at least 26 miles per gallon. To see if the goal is being met, they check the gasoline usage for 50 company trips chosen at random, finding a mean of 25.02 mpg and a standard deviation of 4.83 mpg. Is this strong evidence that they have failed to attain their fuel economy goal? a) Write appropriate hypotheses. b) Are the necessary assumptions to perform inference satisfied? c) Test the hypothesis and find the P-value. d) Explain what the P-value means in this context. e) State an appropriate conclusion.
a) The appropriate hypotheses for this question are:
H0: The mean fuel economy for the company's fleet of cars is less than or equal to 26 miles per gallon (MPG).
HA: The mean fuel economy for the company's fleet of cars is greater than 26 MPG.
b) The necessary assumptions to perform inference in this situation are that the data is sampled from a normal distribution, and that the sample is a random sample from the population.
c) To test the hypothesis, we can perform a one-sample t-test with a significance level of 0.05. The P-value for this test is 0.004.
d) The P-value in this context indicates that, at a significance level of 0.05, there is a 0.004 probability of obtaining the data given that the null hypothesis is true.
e) Based on the P-value, we can reject the null hypothesis and conclude that the mean fuel economy for the company's fleet of cars is greater than 26 MPG.
"fuel economy", https://brainly.com/question/15776562
#SPJ11
what the deffinition of structural formula?
Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.
Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.
The structural formula also shows the spatial arrangement of atoms and groups in a compound.
There are two types of structural formulas: condensed structural formulas and Lewis structures.
Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.
The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.
Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.
These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.
For similar question on structural formula.
https://brainly.com/question/26388921
#SPJ11
The Wittig reaction can be used for the synthesis of conjugated dienes. Propose a combination of Wittig reagent and aldehyde/ketone that can be used to synthesize the double bond labeled b in this structure.
The Wittig reaction can be used to synthesize conjugated dienes by reacting an aldehyde or ketone with a phosphorous ylide. For the double bond labeled b in the given structure, a combination of a Wittig reagent and an aldehyde can be used to synthesize the desired product.
The Wittig reaction can be used for the synthesis of conjugated dienes. To synthesize the double bond labeled b in this structure using Wittig reagent and aldehyde/ketone, the following steps should be followed:
Step 1: The starting materials are Wittig reagent and aldehyde/ketone. The aldehyde/ketone can be either cyclic or acyclic.
Step 2: A solution of Wittig reagent in THF is added to the aldehyde/ketone, and the mixture is heated for several hours to allow the Wittig reaction to occur.
Step 3: The product is then isolated by filtration and recrystallization, and the double bond labeled 'b' is formed. The combination of Wittig reagent and aldehyde/ketone that can be used to synthesize the double bond labeled 'b'.
Wittig reagent: Ph3PCH2=CPh2
Aldehyde/Ketone: C6H5CH2CHO or C6H5C(O)CH3
Thus, the Wittig reagent Ph3PCH2=CPh2 and aldehyde/ketone C6H5CH2CHO or C6H5C(O)CH3 can be used to synthesize the double bond labeled 'b'.
For more such questions on Wittig reaction , Visit:
https://brainly.com/question/17145573
#SPJ11
Tartaric acid is found in many fruits, including grapes, and is partially responsible for the dry texture of certain wines. Calculate the pH and the tartrate ion 1C4H4O6 2-2 concentration for a 0.250 M solution of tartaric acid, for which the acid-dissociation constants. Did you have to make any approximations or assumptions in your calculation?
No approximations or assumptions need to be made in the calculation of the pH and the tartrate ion 1C4H4O6 2-2 concentration for a 0.250 M solution of tartaric acid.
The pH and the tartrate ion 1C4H4O6 2-2 concentration of a 0.250 M solution of tartaric acid can be calculated using the acid-dissociation constants and the Henderson-Hasselbalch equation. The acid-dissociation constants (Ka1 and Ka2) of tartaric acid are 1.14x10-2 and 5.01x10-5, respectively.
The pH of the solution can be calculated using the Henderson-Hasselbalch equation: pH = pKa + log([base]/[acid]) where [base] is the concentration of the conjugate base (the tartrate ion) and [acid] is the concentration of the acid (tartaric acid). Since the solution is 0.250 M in tartaric acid, [acid] = 0.250 M and [base] = 0.250 M - [tartrate ion], which can be calculated using the Ka1 and Ka2 values.
For Ka1, the tartrate ion 1C4H4O6 2-2 concentration can be calculated as 0.250 M - 0.250 * 1.14x10-2 = 0.249 M. For Ka2, the tartrate ion 1C4H4O6 2-2 concentration can be calculated as 0.250 M - 0.250 * 5.01x10-5 = 0.249 M.
Using the Henderson-Hasselbalch equation, the pH of the solution can be calculated as pH = pKa + log([base]/[acid]). The pKa values of tartaric acid are 3.92 and 5.63 respectively. Therefore, for Ka1, the pH of the solution can be calculated as pH = 3.92 + log(0.249/0.250) = 3.91, and for Ka2, the pH of the solution can be calculated as pH = 5.63 + log(0.249/0.250) = 5.63.
No approximations or assumptions need to be made in the calculation of the pH and the tartrate ion 1C4H4O6 2-2 concentration for a 0.250 M solution of tartaric acid, as the Henderson-Hasselbalch equation and the acid-dissociation constants of tartaric acid can be used.
Learn more about Tartaric acid: brainly.com/question/24178503
#SPJ11
True or False : A scientific law is different from a scientific theory because it describes something in nature without attempting to explain it.
Answer:
True
hope it helps you [and others too] ;)
The shape of each individual sugar crystal remains fixed, whether we take it in our hand, put it in a plate or in a jar. Due to this property, we consider it as a solid.
Given samples of water:
Sample 1: 100. Grams of water at 10. °C
Sample 2: 100. Grams of water at 20. °C
Compared to sample 1, sample 2 contains
A) molecules with a lower average kinetic energy
B) molecules with a lower average velocity
C) less heat energy
D) more heat energy
On comparing sample-1 and sample-2 it contains more heat energy.
Temperature is a compute of the average kinetic energy of the molecules in a element. The higher the temperature, the more kinetic energy the molecules have, and therefore the more heat energy the substance contains.
In this case, sample 2 is at a higher temperature than sample 1, which means its molecules have a higher average kinetic energy and velocity.
This results in sample 2 containing more heat energy than sample 1. It's important to note that heat energy is not the same as temperature, as heat energy is a form of energy while temperature is a measure of the average kinetic energy of molecules.
To know more about samples of water:
https://brainly.com/question/29411059
#SPJ4
In a recrystallization, the crystals do not always form spontaneously after cooling, even though the solution is supersaturated. Which of the following will help crystals form? More than one answer may be correct.
1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent.
2. Add a scrap of paper to nucleate the crystals.
3. Add some crystals of the compound you are trying to crystallize.
4. Add some crystals of any kind.
5. Scrape the outside of the Erlenmeyer flask with a glass rod.
These three options are correct for assisting crystal formation- 1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent. 2. Nucleate the crystals with a scrap of paper. 3. Include some crystals of the compound being crystallized.
What is crystallization?Crystallization is the process by which a solid material forms a structured arrangement of its particles, producing a highly ordered and frequently repeating pattern. The formation of solid crystals such as salt, sugar, and diamonds exemplifies this. When the molecules of a solid tend to organize themselves into a more ordered pattern, this is referred to as crystallization.
How adding a scrap of paper to nucleate the crystals will result in formation of crystals?Seeding is the process of adding a scrap of paper to nucleate the crystals. Seeding entails placing a small crystal in a container of supersaturated solution, which serves as a nucleus for other crystals to form around. This process accelerates crystal growth and can be used to produce larger, more consistent crystals. It can also be used to make crystals of various shapes and sizes. The addition of a scrap of paper causes the solution to form around it, promoting crystal formation.
to know more about Erlenmeyer flask, visit:
brainly.com/question/10261429
#SPJ1
11. C2 JUN 06 Q3
Classify the type of reaction occurring below.
CH₂CH₂CHCH₂OH
CH,
→CH₂CH₂C=CH₂ + H₂O
CH,
12.a) Draw the displayed formula, and name the ester formed when ethanoic acid reacts with propan-1-ol
in the presence of a suitable catalyst.
Name:
b) State the name of a suitable catalyst for this reaction.
[1]
24
...[2]
..[1]
Answer:
11.The type of reaction occurring is an elimination reaction.
12. a) The displayed formula and name of the ester formed when ethanoic acid reacts with propan-1-ol in the presence of a suitable catalyst are:
Displayed formula:
H H
│ │
H-C-C-OH + H-C-C-H → H-C-C-OC-C-H + H₂O
│ │
H CH₃
Name: Propan-1-yl ethanoate or propyl acetate
b) A suitable catalyst for this reaction is concentrated sulfuric acid (H₂SO₄).
According to Appendix D of your lab manual, how do you determine if a data point can be ignored when calculating the average in General Chemistry? By using the Q-test at 90% confidence By using the Q-test at 95% confidence By using the standard deviation at 90% confidence By using the standard deviation at 95% confidence The spectator ions in the reaction between aqueous perchloric acid and aqueous barium hydroxide are: HT, OH", C104, and Ba2+ CI04 and Ba2+ H+ and Ba2+ OH and CIO4 H+ and OH-
To determine if a data point can be ignored when calculating the average in General Chemistry, Appendix D of the lab manual recommends using the Q-test at 95% confidence. The Q-test is a statistical test that is used to determine if a data point is an outlier, or if it falls outside the expected range of values for the data set.
To use the Q-test, one must calculate the Q-value for each data point and compare it to the critical Q-value at the desired level of confidence. If the calculated Q-value is greater than the critical Q-value, then the data point is considered an outlier and can be excluded from the calculation of the average.
Regarding the second question, the spectator ions in the reaction between aqueous perchloric acid and aqueous barium hydroxide are H+ and ClO4-. These ions do not participate in the chemical reaction, but are present in the solution due to the dissociation of the reactants. The actual chemical reaction is the formation of insoluble barium perchlorate (Ba(ClO4)2) and water (H2O) through the combination of barium hydroxide (Ba(OH)2) and perchloric acid (HClO4), which are the only ions involved in the reaction.
To learn more about barium hydroxide refer to
brainly.com/question/30888146
#SPJ4
in one complete turn of the citric acid cycle the carbons of citrate are converted to (check all that apply)?
During the cycle, citrate undergoes a series of chemical reactions that involve several enzymes, resulting in the conversion of citrate to isocitrate, α-ketoglutarate, succinyl-CoA, succinate, fumarate, and finally to oxaloacetate.
What are carbons ?
Carbons are atoms of the chemical element carbon. Carbon is a nonmetallic element that is essential to life on Earth. It is the basis for all known forms of life and is a key component of organic molecules, which are the building blocks of life.
Carbon atoms have six protons in their nucleus and typically have six neutrons as well, giving them an atomic mass of 12. Carbon atoms can bond with other atoms of carbon to form long chains or with atoms of other elements to form a variety of different molecules, including carbohydrates, lipids, nucleic acids, and proteins.
In one complete turn of the citric acid cycle, the carbons of citrate are converted to the following:
Carbon dioxide (CO2)
Oxaloacetate
ATP (Adenosine triphosphate)
NADH (Nicotinamide adenine dinucleotide)
FADH2 (Flavin adenine dinucleotide)
During the cycle, citrate undergoes a series of chemical reactions that involve several enzymes, resulting in the conversion of citrate to isocitrate, α-ketoglutarate, succinyl-CoA, succinate, fumarate, and finally to oxaloacetate. Along the way, carbon dioxide is released, and electrons are transferred to electron carriers such as NAD+ and FAD, which are then used to generate ATP via oxidative phosphorylation.
To know more about reaction visit :-
https://brainly.com/question/11231920
#SPJ1
when ammonia reacts with oxygen, nitrogen monoxide and water are produced. the balanced equation for this reaction is:
The balanced equation for the reaction between ammonia and oxygen, which produces nitrogen monoxide and water is as 4 NH3 + 5 O2 → 4 NO + 6 H2O
The reaction is exothermic, and it occurs through a series of steps.
Firstly, ammonia oxidizes into nitrogen monoxide, which is a brown gas, and water vapor.
4 NH3 + 5 O2 → 4 NO + 6 H2O
The nitrogen monoxide is further oxidized by reacting with more oxygen molecules.
2 NO + O2 → 2 NO2
Finally, the nitrogen dioxide can react with water vapor to produce nitric acid and nitrogen oxide.
3 NO2 + H2O → 2 HNO3 + NO
When oxygen reacts with ammonia, nitrogen monoxide and water are produced.
To know more about balanced equation, refer here:
https://brainly.com/question/12192253#
#SPJ11
draw the structure for chloric acid, hclo3. optimize formal charges.
The structure of chloric acid, HClO3, consists of a chlorine atom bonded to three oxygen atoms, with two of the oxygen atoms carrying a single negative charge. The formal charges of the atoms are optimized to achieve a neutral overall charge.
Optimizing the formal charges in the structure of chloric acid, HClO3, involves adjusting the distribution of electrons to achieve the most stable configuration while ensuring the overall charge of the molecule is neutral. This is important because it affects the molecule's reactivity and properties, including its acidity and ability to form bonds with another molecule.
O
|
H O
| ||
H -- O -- Cl -- O
| |
H O
|
H
learn more about chloric acid here:
https://brainly.com/question/3520712
#SPJ4
The acceleration of a particle in an electric field depends on the charge-to-mass ratio of the particle.(a) compute e / m for a proton and find its acceleration in a uniform electric field of magnitude 100 n / c. (b) find the time it takes for a proton initially at rest in such a field to reach the speed of 0.01c
Answer:91
Explanation:because I am just very smart and this is the answer <3
In an open manometer with an atmospheric pressure of 780 mm Hg, the mercury level in the arm connected to the gas is 45 mm Hg higher than in the arm connected to the atmosphere. What is the pressure of the gas sample? (answer in mm Hg)
The pressure of the gas sample is 825 mm Hg.
How to find the pressure of the gas sample?
In an open manometer, the pressure of the gas sample can be determined by measuring the difference in height of the mercury levels in the two arms of the manometer. The pressure of the gas sample is equal to the difference in height between the two mercury levels, plus the atmospheric pressure.
In this case, the mercury level in the arm connected to the gas is 45 mm Hg higher than in the arm connected to the atmosphere. This means that the pressure of the gas sample is 45 mm Hg higher than the atmospheric pressure.
So, the pressure of the gas sample can be calculated as:
Pressure of gas sample = atmospheric pressure + height difference between the two mercury levels
Pressure of gas sample = 780 mm Hg + 45 mm Hg
Pressure of gas sample = 825 mm Hg
Therefore, the pressure of the gas sample is 825 mm Hg.
Learn more about manometer here : brainly.com/question/13949430
#SPJ1
What does the phrase, “When it pours, the desert stores” refer to?
Many organisms come out only at night, when it is cooler.
Organisms capture rainwater and save it for later.
Sand builds up in sand dunes.
There’s a lot of activity in the desert after a rainstorm.
B. Organisms capture rainwater and save it for later.
How does the desert stores water?The desert stores water in several ways. One of the most important is through the formation of underground aquifers, which are underground layers of permeable rock, sediment, and soil that store and transmit water. The water is held in the pores of the aquifer material, allowing it to be accessed through wells.
Water is also stored in the soil and vegetation, and in the form of snow and ice in some desert regions.
Learn more about deserts here:
https://brainly.com/question/1193694
#SPJ1
Consider the following thermochemical equation: C(s) + O2(g) → CO2(g) ΔH = −393 kJ CO(g) + ½O2(g) → CO2(g) ΔH = −294 kJ What is the enthalpy change for the following related thermochemical equation C(s) + ½O2(g) → CO(g) Group of answer choices a. −687 kJ b. –99 kJ c. +99 kJ d. +687 kJ
Option (b) is correct. The enthalpy change for the thermochemical equation, C (s) + ½O2(g) → CO2(g) is -99 KJ.
Hess's law states that the total heat changes occurring during a chemical reaction are independent of path.
Thermochemical equation are defined as the chemical equation which includes the term 'Heat' are referred to as thermochemical equations. The thermochemical equation include chemical equations for endothermic reactions and exothermic reaction. The thermochemical equations are,
C(s) + O2(g) → CO2(g), ΔH = −393 kJ
CO(g) + ½O2(g) → CO2(g), ΔH = −294 kJ
Adding both the solution we get,
C (s) + ½O2(g) → CO2(g)
so, ΔH = 294 kJ - 393 kJ
= -99 KJ
The standard enthalpy change of reaction for a chemical reaction can be defined as the the difference between total reactant and total product molar enthalpies calculated for substances in their standard states.
To learn more about enthalpy change
https://brainly.com/question/14047927
#SPJ4
SEP Interpret Data The table shows the atomic radi and balline
points of five halogens that experience intermolecular disea
forces. Plot the boiling point vs the atomic radius was the
resulting pattern to predict the boiling point
of astatine.
The table shows that as the atomic radius grows, the boiling points of the halogens rise. This implies that the intensity of the intermolecular interactions between the atoms and the size of the halogen atom are related.
Because astatine has a bigger atomic radius than iodine, we can infer from this pattern that it will have a higher boiling point.
Atomic radiusThe attractive forces that occur between molecules are known as intermolecular forces. The sort of molecules involved, as well as their size, shape, and polarity, all affect how strong these forces are. Intermolecular forces are often stronger for bigger molecules and molecules with more polarity.The cause of this pattern is that the distance between the atoms in a molecule rises along with the size of the halogen atom. The London dispersion forces between the molecules become stronger as a result. These forces are a result of the transient dipoles formed as electrons move about in the atom's or molecule's electron cloud.learn more about boiling point here
https://brainly.com/question/40140
#SPJ1
A student is designing a new insulated drink cup using unconventional materials. They will have an inside and an outside cup with a material from the table in between the cups as insulation.Which material should they use to prevent heat loss?
The best material for insulation in this case would be Styrofoam. Styrofoam is lightweight, strong, and an excellent thermal insulator. It is composed of tiny bubbles of air that are suspended in a matrix of plastic. The air trapped inside the bubbles acts as a thermal barrier, keeping heat out or in, depending on the application.
Its lightweight nature makes it easier to manipulate, while its strength gives it the durability needed to keep a drink hot or cold. Its insulation properties also make it the perfect material for the student's insulated drink cup.
Styrofoam can be cut and shaped easily, making it a great material for use in drink cups. The material is also easy to clean and resistant to water and other liquids, which makes it ideal for frequent use. Additionally, Styrofoam is both affordable and widely available, making it an ideal choice for the student's project.
Know more about thermal insulator here:
https://brainly.com/question/23134662
#SPJ11
C. Compare and contrast the different forms of energy and their
characteristics.
Type of Energy Characteristics
Heat
Light
Electricity
Mechanical
Motion
potential
Sound
Examples
Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. How much plutonium will be left in 87.7 years? A) None B) 0.25 kg C) 0.5 kg D) 1.0 kg E) 2 kg
The answer is C) 0.5 kg. This is because Plutonium-238 has a half-life of 87.7 years, which means that after 87.7 years, half of the original amount of Plutonium-238 will remain. In this case, that would be 2 kg * 0.5 = 0.5 kg.
Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half-life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. Radioactive decay is a random event. So, it is impossible to predict when a specific atom will decay. But we can find how much radioactive material is remaining after a specific period of time.
The half-life of a radioactive material is the time required for half of the radioactive material to decay. The formula to calculate the remaining material is:
N(t) = N0 × (1/2)^(t/t1/2)
Where N(t) is the remaining material at time t, N0 is the initial material, t1/2 is the half-life, and t is the elapsed time.
The initial material is 2 kg, half-life is 87.7 years, and the elapsed time is also 87.7 years.
N(87.7) = 2 kg × (1/2)^(87.7/87.7)= 1 kg × 0.5= 0.5 kg
Therefore, the amount of plutonium remaining after 87.7 years will be 0.5 kg. So, the answer is option C.
For more such questions on Plutonium , Visit:
https://brainly.com/question/13217330
#SPJ11
Which of the following categories of compounds will affect the pH of the aqueous solution they are dissolved in? This assumes they are water soluble. Pick all that apply.
Multiple answers: You can select more than one option
A alcohols
B amine
C aldehyde
D carboxylic acids
The categories of compounds that will affect the pH of the aqueous solution they are dissolved in are Amines, and Carboxylic acids. Therefore the correct answer is letters B and D.
Compounds affecting pH in an aqueous solutionCompounds that will affect the pH of the aqueous solution they are dissolved in are Amines, and Carboxylic acids. The reason for this is that when these compounds dissolve in water, they produce ions that affect the pH of the solution.
What are Amines?Amines are organic compounds that have a nitrogen atom bonded to one or more carbon atoms. They are basic in nature and can undergo an acid-base reaction to produce a protonated amine (NH₃⁺) that can affect the pH of the solution.
What are Carboxylic Acids?Carboxylic acids are organic compounds that have a carboxyl (-COOH) functional group attached to a carbon atom. They are acidic in nature and can undergo an acid-base reaction to produce a carboxylate ion (COO⁻) that can affect the pH of the solution.
learn more about amine and carboxyl groups
https://brainly.com/question/11023705
#SPJ11
Did you know that dihydrogen monoxide (DHMO), hydric acid, kills over 4,000 people a year and can injure or seriously hurt thousands more? It’s in the food you will eat today and in everything you drink. Yet the government does not outlaw this dangerous chemical compound. Links to an external site. What can we do to fix this?
Water, a naturally occurring and vital component for life on Earth, is really known chemically as dihydrogen monoxide (DHMO). When consumed in moderation, it is not dangerous.
Dihydrogen monoxideThe claim you made appears to be a well-known internet hoax that has been circulated for a while. It is frequently used in jokes and satire to highlight how quickly false information and fear-mongering can spread.
It is crucial to rely on reliable sources and scientific facts when analyzing information, especially when it comes to health and safety, to address your concern. To assist people in recognizing and avoiding misleading or inaccurate information, it is also crucial to encourage critical thinking and media literacy.
In other words, since dihydrogen monoxide is a fundamental substance required for existence, there is nothing to "repair" in regard to it. Instead, in order to assure accurate and trustworthy knowledge, we should concentrate on information verification and the advancement of scientific literacy.
learn more about dihydrogen monoxide here
https://brainly.com/question/29094259
#SPJ1
please help and give an explanation i don’t get it
The mass (in grams) of water, H₂O produced from 6.00 moles of hydrogen gas, H₂, is 108 g (last option)
How do i determine the mass of water produced?We'll begin by obtaining the mole of water produced from the reaction. Details below:
2H₂(g) + O₂ -> 2H₂O
From the balanced equation above,
2 moles of H₂ reacted to produce 2 moles of H₂O
Therefore,
6 moles of H₂ will also react to produce 6 moles of H₂O
Finally, we shall determine the mass of water, H₂O produced. Details below:
Molar mass of water, H₂O = 18 g/mol Mole of water, H₂O = 6 molesMass of water, H₂O = ?Mole = mass / molar mass
6 = Mass of water, H₂O / 16
Cross multiply
Mass of water, H₂O = 6 × 18
Mass of water, H₂O = 108 g (last option)
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
what do you mean by peroxide effect?
the change in regioselectivity of the addition of HBr to an alkrne or alkyne in the presence of a peroxide
Answer:
Explanation:
The change in regioselectivity of the addition of HBr to an alkene or alkyne in the presence of a peroxide.
In the Insoluble and Soluble Saltlab, the dropper bottles containing the anions to be studied were all _____The dropper bottles containing the cations to be studied were all ______salt solutions
The dropper bottles containing the anions to be studied were all sodium hydroxide (NaOH) solutions. The dropper bottles containing the cations to be studied were all potassium chloride (KCl) salt solutions.
Salt- A salt is a chemical compound that is produced by the reaction of an acid with a base, which results in a substance that is made up of positively charged ions and negatively charged ions, known as cations and anions, respectively.
Soluble salt- It is formed by reacting an alkali and an acid in a solution. In this case, NaOH and KCl are reacted to form the soluble salt solution, i.e., NaCl solution.
To learn more about "soluble saltlab", visit: https://brainly.com/question/29311762
#SPJ11