Complete the mechanism for the given reaction by adding the missing bonds, charges, nonbonding electrons, and curved arrows

Answer:

Newton's first law: the law of inertia

Newton's first law states that if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.

Explanation:

Anything aka if a body is at constant speed in a straight line it would probably remain or keep moving in a straight line unless something slows it down like Fricton.

Answer:

No, the eggs are in direct contact with the metal pan, which is in direct contact with the gas flame, so this is conduction, not radiation

Reasons:
-Thermal energy is being transferred by conduction.

-Radiation transfers thermal energy by electromagnetic waves.

-Radiation does not transfer thermal energy by direct contact.

Radiation heat transfer is a process where heatwaves are emitted that may be absorbed, reflected, or transmitted through a colder "body". Sun heats the earth by electromagnetic waves. The sun does not come in physical contact with the Earth to transfer heat. (In my opinion, the Earth touching the sun would not be on my to-do list.)

Explanation:

Have a great rest of your day
#TheWizzer

Answer:

The heat went from the i cream to the spoon making it cool.

Explanation:

i just know.

B that is the correct answer

Answer:

D, A convex lens converges light and curves outward.

Explanation:

edge

A convex lens converges light and curves outward.

A lens that is thin at the bottom and upper edges and somewhat thick in the middle is referred to as a convex lens. The edges are not bent inside, but rather outward.

Here,

In a convex lens, the light rays travelling parallel to its principal axis are converged by it (i.e., the incident rays are directed towards the principal axis).

Since all of the light rays that are refracted by a convex lens eventually converge at a single point, where the image is created, the convex lens is also known as a converging lens.

A converging lens produced a virtual image when the object is placed in front of the focal point.

Hence,

A convex lens converges light and curves outward.

To learn more about convex lens, click:

https://brainly.com/question/15195355

#SPJ5

Explanation:

No. Surface contact area also no. The main issue is the types of materials in contact. Surface roughness somewhat matters. Certain surfaces such as ice are special in that pressure melts the ice.

Answer:

A

Explanation:

i think its A

Answer:

Yes. To maintain constant total energy, when released from rest the charge loses potential energy as it gains kinetic energy in its "fall" toward the negative plate.

Explanation:

Answer:

Yes. Left. To maintain constant total energy, when released from rest the charge loses potential energy as it gains kinetic energy in its "fall" toward the negative plate.

Answer:

The Moon orbits Earth once every 27.3 days and spins on its axis once every 27.3 days. This means that although the Moon is rotating, it always keeps one face toward us. Known as “synchronous rotation,” this is why we only ever see the Moon's nearside from Earth.

I hope this helps you out

Answer:

Because Geography says the higher one goes the colder it gets

Answer:

The nature of convection.

Explanation:

Warm air rises; cold air falls, so the freezer at the top provides cold air for the other compartments at the bottom.

Explanation:

When a magnetic body is buried inside the earth in North-South direction, it gets magnetized due to the effect of terrestrial magnetism. A freely suspended magnet faces North-South direction.

Answer:

Explanation:

The picture is cut off so the wrecking ball and its path are not shown. It would be better if the whole picture is available.

Based on the written info, at the bottom of the path, the wrecking ball is moving at 10m/s.

The centripetal acceleration = velocity^2 / radius

= 10^2 / 25

= 100 / 25

= 4m/s^2

The centripetal force = mass * centripetal acceleration

= 600*4

= 2400N

As the ball is moving horizontally at the bottom, net vertical force is zero.

So Tension force in cable = Wrecking ball weight + Centripetal force

= 600*g + 2400

= 6000 + 2400; assuming g is 10m/s^2

= 8400N

Answer:

If the body temperature falls below this temperature then enzymes will work too slowly for body process to occur fast enough the keep the mammal alive.

Explanation:

Answer:

Edmond Locard

Explanation:

Hope this helps :)

Gwen's position is a function of his velocity and time

Gwen's position at 45 seconds is 63.9 feet

The function is given as:

v(t) = 250sin(t^2/120)/(t + 6)

When t = 45, we  have:

v(45) = 250sin(45^2/120)/(45 + 6)

Evaluate the sum, the exponent and the quotient

v(45) = 250sin(16.875)/(51)

Evaluate the sine ratio

v(45) = 250 * 0.2903/51

Evaluate the product and quotient

v(45) = 1.42

The position is then calculated as:

S(45) = v(45) * 45

This gives

S(45) = 1.42 * 45

Evaluate the product

S(45) = 63.9

Hence, Gwen's position at 45 seconds is 63.9 feet

Read more about velocity function at:

https://brainly.com/question/10962624

The displacement is the shortest between any two given points. The displacement of Gwen at the time period of 45 seconds is 63.9 feet.

The displacement is the shortest between any two given points. It is the product of velocity and time.

Given that the function of the velocity is [tex]v(t)=\dfrac{250\sin\left(\frac{t^{2}}{120}\right)}{\left(t+6\right)}[/tex]. Therefore, substitute the value of t as 45, to know the velocity of Gwen at 45 seconds,

[tex]v(t)=\dfrac{250\sin\left(\frac{t^{2}}{120}\right)}{\left(t+6\right)}[/tex]

[tex]v(45)=\dfrac{250\sin\left(\frac{45^{2}}{120}\right)}{\left(45+6\right)}\\\\v(45) = 1.42[/tex]

Since displacement is the product of velocity and time, therefore, the displacement is equal to,

[tex]s = v \times t\\\\s = 1.42 \times 45\\\\s = 63.9\rm \ feet[/tex]

Hence, the displacement of Gwen at the time period of 45 seconds is 63.9 feet.

Learn more about Displacement:

https://brainly.com/question/11934397

#SPJ4

Answer:

10 hours.

Every 10 hours, Jupiter will rotate at least once. It takes 12 years for Jupiter to make a revolution. This is because Jupiter is a gas, non-solid planet and also has a very large mass.

Answer: 10 Hours

Explanation:

Jupiter is the fastest spinning planet in the solar system

This question involves the concept of the law of conservation of momentum.

The horizontal speed acquired by catching the ball will be "0.223 mph".

According to the law of conservation of momentum applied in horizontal direction:

Total Initial Momentum = Total Final Momentum

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

Therefore,

[tex](0.145\ kg)(100\ mph)+(65\ kg)(0\ mph)=(0.145\ kg)(0\ mph)+(65\ kg)(v_2)\\\\v_2=\frac{14.5\ kg.mph}{65\ kg}\\\\[/tex]

v₂ = 0.223 mph

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396

This is less an answer more like the answers that should be it.

A) 9.9 cm/s

B) 5.6 cm/s

C) 11.8 cm/s

D) 4.2 cm/s

Answer:

c. Resin.

Explanation:

Amber is a resin.

Answer:

d (density) = m / V = (292 - 180) g / 95 cm^3 = 1.18 g / cm^3

(water is 1 gm / cm^3)

Temperature for combination be cooled to separate the brass ring of diameter 10.00 cm at 14.3°c and an aluminum rod of diameter 10.01 cm at 14.3°c is -204.7° C, which is not attainable.

The linear expansion is the expansions of metal when they are heated and their length is changed along one direction.

A brass ring of diameter 10. 00 cm at 14. 3°c is heated and slipped over an aluminum rod of diameter 10. 01 cm at 14. 3°c. Assume the average coefficients of linear expansion are constant

(a) To what temperature must the combination be cooled to separate the two metals?

To find the temperature, use the following formula,

[tex]T=T_o+\dfrac{d_o^A-d_o^B}{\alpha _Ad_o^A-\alpha _Ad_o^B}[/tex]

Put the values,

[tex]T=14.3+\dfrac{10.01-10}{(19\times10^{-6})(10.01)-(24\times10^{-6})(10)}\\T=-204.7^o C[/tex]

Thus, temperature for combination be cooled to separate the brass ring of diameter 10.00 cm at 14.3°c and an aluminum rod of diameter 10.01 cm at 14.3°c is -204.7° C, which is not attainable.

Learn more about the linear expansion here;

https://brainly.com/question/1217769

#SPJ4

Answer:c

Explanation: I took the identifying claims quick check and the answers are 1.yes it can be 2. No because it is an opinion 3.claims 4.it is prediction 5.both particles and waves 6.a wave model is most useful

Scientists use to describe electromagnetic radiation as It exhibits properties of both particles and waves. The correct option is B.

An electromagnetic wave is a type of wave that consists of oscillating electric and magnetic fields that travel through space at the speed of light.

Electromagnetic waves are produced by the movement of charged particles and are characterized by their frequency, wavelength, and amplitude.

Electromagnetic waves include a wide range of frequencies, which together form the electromagnetic spectrum. The spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Each of these types of electromagnetic waves has a different frequency and wavelength, which determines its properties and how it interacts with matter.

Here in the question,

Scientists describe electromagnetic radiation as exhibiting properties of both particles and waves.

This is known as the wave-particle duality of electromagnetic radiation, which means that electromagnetic radiation can exhibit both wave-like and particle-like behavior depending on how it is observed or measured.

The wave-like behavior is described by its frequency, wavelength, and amplitude, while the particle-like behavior is described by its energy, momentum, and photons.

Therefore, The electromagnetic wave shows duality i.e both particle and wave properties.

To learn more about The electromagnetic wave click:

https://brainly.com/question/3101711

#SPJ3

Answer:

The volume of a gas is dependent on pressure and temperature.

Explanation:

Pressure and temperature affect different gases differently giving varied conclusions to the exact volume of that gas.

:-befrank

Answer:

200 N Right

Explanation:

The 50 up and 50 down  balance or 'cancel' each other

   then you only have the 200 N to the right

Answer: another force on puck?

Force is a vector quantity characterized by the rate of change of momentum.

Mathematically, it is the product of mass and acceleration.

F = m × a

=> F = (150/1000) × (-1.2)

=> F = -0.18 kg m/s²

=> F = -0.18 N

Answer:

The electrical loads in parallel circuits each have the same voltage drop, with equals the total applied voltage of the circuit.

Explanation:

I did some research and the voltage drop across any branch of a parallel circuit is the same as the applied voltage.

[tex] \sf \qquad \qquad \huge \underbrace{єхplαnαtiσn}[/tex]

The correct choice is ❝ A ❞

❖ whєn wє tαlk αвσut α pєndulum, ít gσєѕ thrσugh ❝ tσ αnd frσ ❞ mσtíσn, αlѕσ knσwn αѕ hαrmσníc mσtíσn. αѕ вєíng ín thє cαѕє σf α pєndulum, thєrє'ѕ α cσntínuσuѕ chαngє ín kínєtíc αnd pσtєntíαl єnєrgч.

❖ whєn thє вσв íѕ αt mєαn pσѕítíσn, ít hαѕ ítѕ mαхímum vєlσcítч, αnd thє nєt fσrcє αnd αccєlєrαtíσn αctíng σn ít íѕ zєrσ, thєrєfσrє ít hαѕ mαхímum kínєtíc єnєrgч αt thαt pαrtículαr ínѕtαnt.

❖ whєrє αѕ, íf thє вσв íѕ αt σnє σf thє єхtrєmє pσѕítíσnѕ, ítѕ vєlσcítч вєcσmєѕ zєrσ, αnd thє αccєlєrαtíσn αnd fσrcє αctíng σn ít íѕ mαхímum, ѕímcє ít hαѕ nσ vєlσcítч, thєrєfσrє ít hαѕ nσ kínєtíc єnєrgч αt thαt ínѕtαnt, thє σnlч єnєrgч ít hαѕ αt thαt tímє íѕ pσtєntíαl єnєrgч.

❖ ѕíncє thє mσvєmєnt íѕ cσntínuσuѕ, cσntínuσuѕ chαngє ín єnєrgч σccurѕ, вut thє ѕum σf вσth thє єnєgíєѕ rєmαínѕ cσnѕtαnt αt єvєrч ínѕtαnt.

[tex]\qquad \qquad\huge \dag\normalsize\sf \boxed{\underline{ǤríʍɌεαƿєr}} \: \huge \dag[/tex]

For E = 200 gpa and i = 65. 0(106) mm4,  the slope of end a of the cantilevered beam  is mathematically given as

A=0.0048rads

Generally, the equation for the   is mathematically given as

[tex]A=\frac{PL^2}{2EI}+\frac{ML}{EI}[/tex]

Therefore

A=\frac{10+10^2+3^2}{2*240*10^9*65*10^6}+\frac{10+10^3*3}{240*10^9*65*10^{-6}}

A=0.00288+0.00192=0.0048rads

A=0.0048rads

In conclusion,  the slope is

A=0.0048rads

Read more about Graph

https://brainly.com/question/14375099

The value of slope of end a of the cantilevered beam when E = 200 gpa and i = 65. 0(106) mm4 is 0.0048 rads.

The formula used to find the slope at the end of the cantilevered beam is,

[tex]A=\dfrac{PL^2}{2EI}+\dfrac{ML}{EI}[/tex]

Here, (M) is the momentum, (EI) is flexural rigidity, (P) is concentrated load and (L) is the length of the beam.

Concentrated load is 10 KN and uniform load is 3 kN/m. E = 200 gpa and i = 65. 0(106) mm4.

[tex]A=\dfrac{10+10^2+3^2}{2\times240\times10^9\times65\times10^6}+\dfrac{10+10^3\times3}{240\times10^9\times65\times10^{-6}}\\A=0.00288+0.00192A=0.0048 \rm\; rads[/tex]

Thus, the value of slope of end a of the cantilevered beam when E = 200 gpa and i = 65. 0(106) mm4 is 0.0048 rads.

Learn more about the cantilevered beam here;

https://brainly.com/question/19090244

#SPJ4

Answer:

200,000 joules <3

Explanation:
just accept it

Answer:

[tex]2.00 * 10^5J[/tex]

Explanation:

Make use of your conversion factors:

[tex]200KJ * \frac{1000J}{1kJ} = 200,000J = 2.00* 10 ^5J[/tex]

Or alternatively make use of your scientific notation. [tex]kilo = 10^3[/tex]

Therefore [tex]200kJ = 200*10^3J=2.0*10^2*10^3J = 2.0*10^5J[/tex]