The mechanism for the formation of the major species at equilibrium for the reaction of 3-methyl-2-butanone in water and catalytic aqueous acid forms (b) 2-degree gem-diol.
Protonation of the carbonyl oxygen, the carbonyl oxygen in 3-methyl-2-butanone reacts with the catalytic aqueous acid (e.g. H3O+), resulting in a protonated carbonyl intermediate. Nucleophilic attack by water, a water molecule acts as a nucleophile, attacking the electrophilic carbonyl carbon in the protonated intermediate, forming a tetrahedral intermediate. Deprotonation, the tetrahedral intermediate undergoes deprotonation by another water molecule, which results in the formation of a hydroxyl group and the regeneration of the acid catalyst.
After completing these steps, the final product is a geminal diol, specifically a 2° (secondary) gem-diol, as the carbonyl carbon is bonded to two other carbon atoms. In summary, the reaction of 3-methyl-2-butanone in water and catalytic aqueous acid forms a 2° gem-diol through a series of protonation, nucleophilic attack, and deprotonation steps. The correct answer is (b) 2-degree gem-diol.
To learn more about nucleophilic here:
https://brainly.com/question/29910163
#SPJ11
In the most acceptable electron-dot structure for carbonyl fluoride, COF2 the central atom is A) C, which is singly-bonded to O. B) C, which is doubly-bonded to O C) O, which is singly-bonded to C D) O, which is doubly-bonded to C
The most acceptable electron-dot structure for carbonyl fluoride, COF2, shows that the central atom is C, which is doubly-bonded to O.
In the electron-dot structure for COF2, we first identify the total number of valence electrons for the atoms involved. Carbon has 4 valence electrons, while each fluorine has 7 valence electrons, and oxygen has 6 valence electrons. Adding these up, we get a total of 24 valence electrons for COF2.
Next, we arrange the atoms such that the carbon atom is in the center, and the two fluorine atoms are bonded to it. We then draw single bonds between each fluorine atom and the carbon atom, using 4 valence electrons. This leaves us with 16 valence electrons. To satisfy the octet rule for the oxygen atom, we draw a double bond between each oxygen atom and the carbon atom, using 8 valence electrons. This leaves us with 0 valence electrons remaining, which means that we have successfully accounted for all 24 valence electrons.
To know more about atom visit:
https://brainly.com/question/30898688
#SPJ11
does selling air bottles help the air quality?
Selling air bottles alone does not directly improve air quality.
Air bottles typically contain compressed or purified air, which is often marketed as a novelty or a source of fresh air in polluted areas. While inhaling clean air from such bottles may provide temporary relief or a sense of well-being, it does not address the underlying causes of air pollution or contribute to long-term improvements in air quality. Improving air quality requires comprehensive efforts at a larger scale, such as reducing emissions from industries, promoting cleaner energy sources, implementing effective environmental policies, and raising awareness about the importance of sustainable practices. These actions can have a meaningful impact on air quality by addressing pollution sources and promoting cleaner air for everyone. While selling air bottles may have niche applications in certain circumstances, it is crucial to prioritize and support broader initiatives that aim to tackle the root causes of air pollution and promote sustainable environmental practices for the benefit of both human health and the planet.
for more questions on air
https://brainly.com/question/568323
#SPJ11
Consider the combustion of liquid C₅H₈ in oxygen gas to produce carbon dioxide gas and water vapor. In an experiment, 0.1063 g of C₅H₈ is combusted to produce enough heat to raise the temperature of 150.0 g of water by 7.620 °C. a) How many moles of C₅H₈ were burned? b) how much heat, in J, was absorbed by the water assuming the specific heat of the water is 4.184 J/g degrees C c) then how much heat in J was produced by the combustion of C5H8 (include appropriate sign).
The combustion of C₅H₈ produced 6.13 J of heat.
a) To determine the number of moles of C₅H₈ burned, we need to use the molar mass of C₅H₈. The molar mass of C₅H₈ is 68.12 g/mol. Therefore, 0.1063 g of C₅H₈ is equivalent to 0.00156 moles of C₅H₈.
b) To determine the amount of heat absorbed by the water, we need to use the formula:
q = m x c x ΔT
where q is the amount of heat absorbed, m is the mass of water, c is the specific heat of water, and ΔT is the change in temperature. Plugging in the values, we get:
q = 150.0 g x 4.184 J/g°C x 7.620°C
q = 45645.12 J
Therefore, the amount of heat absorbed by the water is 45645.12 J.
c) To determine the amount of heat produced by the combustion of C₅H₈, we need to use the formula:
q = n x ΔH
where q is the amount of heat produced, n is the number of moles of C₅H₈ burned, and ΔH is the enthalpy change for the combustion of C₅H₈. The balanced chemical equation for the combustion of C₅H₈ is:
C₅H₈ + 5O₂ → 5CO₂ + 4H₂O
The enthalpy change for this reaction is -3935 kJ/mol.
Plugging in the values, we get:
q = 0.00156 mol x (-3935 kJ/mol) x (1000 J/kJ)
q = -6.13 J
The negative sign indicates that the reaction is exothermic, meaning that heat is released. Therefore, the combustion of C₅H₈ produced 6.13 J of heat.
In summary, we determined the number of moles of C₅H₈ burned to be 0.00156 mol, the amount of heat absorbed by the water to be 45645.12 J, and the amount of heat produced by the combustion of C₅H₈ to be -6.13 J. The negative sign indicates that heat was released during the combustion reaction. This experiment demonstrates the law of conservation of energy, which states that energy cannot be created or destroyed, only transferred or converted from one form to another. In this case, the chemical potential energy stored in C₅H₈ was converted into thermal energy released during combustion and absorbed by the water.
Learn more about combustion brainly.com/question/15117038
#SPJ11
Classify the safety concerns that are associated with the given molecules. Some labels may be used more than once. Ceric ammonium nitrate___Aspartame___Methanol ____Ninhydrin ____Potassium permanganate ___Answer Bank oxidizer irritant toxic
The safety concerns associated with these molecules: 1. Ceric ammonium nitrate: oxidizer, 2. Aspartame: generally recognized as safe (no major safety concerns), 3. Methanol: toxic, 4. Ninhydrin: irritant, 5. Potassium permanganate: oxidizer, irritant
Ceric ammonium nitrate is an oxidizer, which means it can react with other chemicals to produce heat and flames. It should be stored away from flammable materials and kept in a cool, dry place. Ingestion or inhalation of ceric ammonium nitrate can be harmful and it can cause irritation to the skin and eyes.
Aspartame is not considered to be toxic or an irritant. However, it can cause adverse effects in people with phenylketonuria (PKU), a rare genetic disorder. People with PKU cannot metabolize phenylalanine, which is a component of aspartame. Thus, aspartame-containing products must be labeled accordingly.
Methanol is a toxic substance and can cause serious harm if ingested or inhaled. It is often used as an industrial solvent and fuel, and can cause blindness or death if consumed. Proper handling and storage is crucial to prevent accidental exposure.
Ninhydrin is a chemical used in forensic investigations to detect the presence of fingerprints. It is not considered toxic, but it can cause skin irritation and should be handled with care.
Potassium permanganate is an oxidizer and can react with other chemicals to produce heat and flames. It can also cause skin and eye irritation, as well as respiratory issues if inhaled. Proper storage and handling is necessary to prevent accidental exposure.
In conclusion, the safety concerns associated with these molecules vary. Ceric ammonium nitrate, methanol, and potassium permanganate are all oxidizers and can cause irritation or harm if not handled properly. Aspartame is not toxic or an irritant, but can cause adverse effects in people with PKU. Ninhydrin is not toxic but can cause skin irritation.
The safety concerns associated with these molecules:
1. Ceric ammonium nitrate: oxidizer
2. Aspartame: generally recognized as safe (no major safety concerns)
3. Methanol: toxic
4. Ninhydrin: irritant
5. Potassium permanganate: oxidizer, irritant
To know more about molecules, refer
https://brainly.com/question/475709
#SPJ11
The standard electrode potential of Ag+/Ag is +0.80 V and of Cu2+/Cu is +0.34 V. These electrodes are connected through a salt bridge and if:
A
Copper electrode acts as cathode, then Ecell∘ is +0.46 volt
B
Silver electrode acts as anode, then Ecell∘ is −0.34 volt
C
Copper electrode acts as anode, then Ecell∘ is +0.46 volt
D
Silver electrode acts as cathode, then Ecell∘ is −0.34 volt
The correct answers are A and D as they follow the rule that electrons flow from anode to cathode.
The given standard electrode potentials of Ag+/Ag and [tex]Cu^{2+[/tex]/Cu indicate that Ag+ is more easily reduced than [tex]Cu^{2+[/tex].
Therefore, if the Cu electrode acts as a cathode, it will attract electrons from the Ag electrode, reducing Ag+ ions to Ag metal and forming [tex]Cu^{2+[/tex] ions.
The overall reaction is Ag+ + Cu → Ag + [tex]Cu^{2+[/tex].
The cell potential is calculated by subtracting the reduction potential of the anode from that of the cathode.
Hence, Ecell∘ = E°([tex]Cu^{2+[/tex]/Cu) - E°(Ag+/Ag) = +0.34 V - (+0.80 V) = -0.46 V, which is the correct answer for B.
Similarly, if the Ag electrode acts as a cathode, the electrons will flow from the Cu electrode, and the cell potential will be +0.46 V, which is the correct answer for A and C.
Finally, if the Ag electrode acts as an anode, the reaction will be Ag → Ag+ + e-,
and the cell potential will be -0.34 V, which is the correct answer for D.
For more such questions on electrons, click on:
https://brainly.com/question/26084288
#SPJ11
The correct option is C) Copper electrode acts as anode, and E°cell is +0.46 volt
The standard electrode potential and determining the cell potential in a galvanic cell. Here's a concise explanation using the given information:
A standard electrode potential (E°) represents the ability of an electrode to gain or lose electrons. In this case, the standard electrode potential of Ag+/Ag is +0.80 V, and for Cu2+/Cu, it is +0.34 V.
To determine the E°cell (cell potential), we need to identify the correct anode and cathode. The half-cell with the lower potential acts as the anode (where oxidation occurs), and the half-cell with the higher potential acts as the cathode (where reduction occurs). Here, Cu2+/Cu has a lower potential, so it will act as the anode, and Ag+/Ag will act as the cathode.
We can now calculate the E°cell using the formula:
E°cell = E°cathode - E°anode
For this case, the cell potential is:
E°cell = (+0.80 V) - (+0.34 V) = +0.46 V
learn more about standard electrode potential Refer: https://brainly.com/question/14240930
#SPJ11
given that h2(g) f2(g)⟶2hf(g)δ∘rxn=−546.6 kj 2h2(g) o2(g)⟶2h2o(l)δ∘rxn=−571.6 kj calculate the value of δ∘rxn for 2f2(g) 2h2o(l)⟶4hf(g) o2(g)
To calculate the Δ°rxn for the reaction 2F2(g) + 2H2O(l) ⟶ 4HF(g) + O2(g), we can use the Hess's law.
The reaction can be broken down into a series of steps, where the reactants and products of the desired reaction are included in the intermediate reactions, and the enthalpies of these reactions are known:
Step 1: H2(g) + F2(g) ⟶ 2HF(g) Δ°rxn = -546.6 kJ/mol (Given)
Step 2: 2H2(g) + O2(g) ⟶ 2H2O(l) Δ°rxn = -571.6 kJ/mol (Given)
Step 3: 2F2(g) + 2H2O(l) ⟶ 4HF(g) + O2(g) Δ°rxn = ?
We need to flip the sign of the enthalpy for Step 1, as the reaction is reversed:
Step 1': 2HF(g) ⟶ H2(g) + F2(g) Δ°rxn = +546.6 kJ/mol
We need to multiply Step 2 by 2 to balance the number of moles of H2O in Step 3:
Step 2': 4H2(g) + 2O2(g) ⟶ 4H2O(l) Δ°rxn = -2(-571.6 kJ/mol) = +1143.2 kJ/mol
Now we can add Steps 1' and 2' to get Step 3:
Step 3: 2F2(g) + 2H2O(l) ⟶ 4HF(g) + O2(g) Δ°rxn = (+546.6 kJ/mol) + (+1143.2 kJ/mol) = +1689.8 kJ/mol
Therefore, the Δ°rxn for the given reaction is +1689.8 kJ/mol.
To know more about reaction refer here
https://brainly.com/question/28984750#
#SPJ11
The measured pH of a 0.100M solution of NH3(aq) at 25C is 11.12. Calculate Kb for Nh3(aq)at 25C.
The Kb value for NH₃ (aq) at 25°C is 4.01 x 10⁻⁵. The calculation involves using the relationship between Ka and Kb for the conjugate acid-base pair.
The first step to finding Kb for NH₃ (aq) is to use the pH value to calculate the concentration of hydroxide ions ([OH⁻]) in the solution:
pH + pOH = 14
pOH = 14 - pH = 14 - 11.12 = 2.88
[OH-] = 10^(-pOH) = 10^(-2.88) = 6.31 x 10⁻³) M
The next step is to use the balanced chemical equation for the reaction of NH₃ with water to write the expression for Kb:
NH₃(aq) + H₂O(l) ⇌ NH₄⁺(aq) + OH-(aq)
Kb = [NH₄⁺][OH⁻]/[NH₃(aq)]
Since NH₃ is a weak base, we can assume that the initial concentration of NH₃ is equal to the equilibrium concentration:
[NH₃(aq)] = 0.100 M
[NH₄⁺] = [OH⁻] (from the balanced equation)
Kb = [OH⁻]⁽²⁾/[NH₃ (aq)] = (6.31 x 10⁻³)^2/0.100 = 4.01 x 10⁻⁵
Therefore, Kb for NH₃(aq) at 25C is 4.01 x 10⁻⁵.
To know more about the Kb value refer here :
https://brainly.com/question/29427601#
#SPJ11
Calculate the ?G°rxn using the following information: 4HNO3 (g) + 5N2H4 (l) --> 7N2(g) + 12H2O (l) ?H= -133.9 50.6 -285.8 ?S= 266.9 121.2 191.6 70.0 ?H is in kJ/mol and ?S is in J/mol the answer needs to be in kJ I got -3298.2648 but that is wrong. Could someone please explain how to do this well please?
ΔG°rxn is calculated using the equation ΔG°rxn = ΔH°rxn - TΔS°rxn, where ΔH°rxn is the standard enthalpy change and ΔS°rxn is the standard entropy change.
How do you calculate the standard Gibbs free energy change (ΔG°rxn) for a given reaction?To calculate the standard Gibbs free energy change (ΔG°rxn) for the given reaction, we use the equation:
ΔG°rxn = ΔH°rxn - TΔS°rxn
where ΔH°rxn is the standard enthalpy change and ΔS°rxn is the standard entropy change.
Given:
ΔH°rxn = -133.9 kJ/mol + 50.6 kJ/mol - 285.8 kJ/mol = -368.7 kJ/mol
ΔS°rxn = 266.9 J/mol + 121.2 J/mol + 191.6 J/mol - 70.0 J/mol = 509.7 J/mol
To convert ΔS°rxn to kJ/mol, divide by 1000:
ΔS°rxn = 0.5097 kJ/mol
Assuming a temperature of 298 K, we can now calculate ΔG°rxn:
ΔG°rxn = -368.7 kJ/mol - (298 K * 0.5097 kJ/mol) = -368.7 kJ/mol - 152.0026 kJ/mol = -520.7026 kJ/mol
Therefore, the correct value of ΔG°rxn is -520.7026 kJ/mol. It appears that your calculated value of -3298.2648 kJ/mol is incorrect, likely due to an error in the calculation.
Learn more about ΔG°rxn
brainly.com/question/31745388
#SPJ11
Assuming equal concentrations, rank these solutions by pH. Highest pH (1) to lowest pH (5)
CaBr2 (aq) CH3NH3Br (aq) HCl (aq) RbOH (aq) K2CO3 (aq)
The ranking of solutions by pH from highest to lowest is: (1) RbOH (aq), (2) K₂CO₃ (aq), (3) CH₃NH₃Br (aq), (4) CaBr₂ (aq), (5) HCl (aq).
To rank the solutions by pH, we need to consider the strength and nature of the ions in each solution. Strong bases and weak acids will have higher pH values, while strong acids and weak bases will have lower pH values.
RbOH (aq) is a strong base, meaning it dissociates completely in water to produce hydroxide ions. This results in a high concentration of hydroxide ions in the solution, leading to a high pH.
K₂CO₃ (aq) is a basic salt that dissociates to produce hydroxide ions, but to a lesser extent than RbOH (aq). This results in a lower concentration of hydroxide ions and a slightly lower pH.
CH₃NH₃Br (aq) is a salt of a weak base (methylamine) and a strong acid (hydrobromic acid). The acidic nature of the hydrobromic acid contributes to a lower pH value.
CaBr₂ (aq) is a salt of a strong acid (hydrobromic acid) and a weak base (calcium hydroxide), resulting in a slightly acidic solution.
HCl (aq) is a strong acid that completely dissociates in water to produce hydrogen ions, leading to a very low pH.
To know more about pH values, refer here:
https://brainly.com/question/29766400#
#SPJ11
. for [s] = 0.10 m and [e]0 = 1.0 x 10-5 m, calculate the rate of formation at 280 k.
The rate of formation for [s] = 0.10 m and [e]0 = 1.0 x 10-5 m at 280 K cannot be calculated without additional information about the reaction.
The rate law and activation energy of the reaction must be known to determine the rate of formation under specific conditions. The rate law describes the relationship between the concentrations of reactants and the rate of the reaction, and the activation energy is the minimum energy required for the reaction to occur. Without this information, it is impossible to calculate the rate of formation.
Learn more about reaction here:
https://brainly.com/question/30115256
#SPJ11
An aqueous methanol, CH_3OH, solution has a mole fraction of 0.618 of methanol. What is the mass percentage of water in this solution?a. 25.8 %b. 38.2 %c. 74.2 %d. 29.2 %e. 11.1 %
The mass percentage of water in the solution is 38.2%. The correct option to this question is B.
To calculate the mass percentage of water in the solution, follow these steps:
Step 1: Find the mole fraction of water.
Since the mole fraction of methanol is 0.618, the mole fraction of water will be (1 - 0.618) = 0.382.
Step 2: Convert mole fraction to mass fraction.
Use the formula: mass fraction = (mole fraction x molar mass of component) / (Σ(mole fraction x molar mass of each component)
For water ([tex]H_{2} O[/tex]), the molar mass is 18 g/mol, and for methanol ([tex]CH_{3} OH[/tex]), the molar mass is 32 g/mol.
Mass fraction of water = (0.382 x 18) / ((0.382 x 18) + (0.618 x 32)) = 6.876 / (6.876 + 19.776) = 6.876 / 26.652 ≈ 0.258.
Step 3: Convert mass fraction to mass percentage.
Mass percentage of water = mass fraction x 100 = 0.258 x 100 ≈ 25.8%.
However, the given options do not have 25.8% as an option. It appears there might be a rounding error in the provided options. In this case, we will consider the closest option to our calculated value.
The closest mass percentage of water in the given options is 38.2% (option b).
For more information on mole fraction kindly visit to
https://brainly.com/question/2927386
#SPJ11
a hydrogen atom absorbs radiation when its electron is excited to a higher energy level. stays in the ground state. makes a transition to a lower energy level. (b) is excited to a higher energy level.
(c) stays in the ground state.
A hydrogen atom absorbs radiation when its electron is excited to a higher energy level. stays in the ground state. makes a transition to a lower energy level. (b) is excited to a higher energy level. The correct option is (b).
A hydrogen atom absorbs radiation when its electron (b) is excited to a higher energy level. It will then (c) make a transition to a lower energy level at a later time, releasing the absorbed radiation in the process. If the electron does not absorb enough energy to reach a higher level, it will simply (c) stay in the ground state.
A hydrogen atom absorbs radiation when its electron is excited to a higher energy level. This occurs because the absorbed energy allows the electron to jump from its ground state to a higher energy level. The ground state is the lowest energy level, and when the electron makes a transition to a lower energy level, it releases energy in the form of radiation. So, the correct answer is (b) is excited to a higher energy level.
For more such questions on hydrogen atom , Visit:
https://brainly.com/question/29434687
#SPJ11
A hydrogen atom absorbs radiation when its electron is excited to a higher energy level. When the electron absorbs energy from the radiation, it moves from a lower energy level to a higher one. This is known as an electronic transition. The energy of the absorbed radiation is equal to the energy difference between the initial and final energy levels. Once the electron reaches the higher energy level, it may eventually return to its original energy level, releasing the absorbed energy as radiation of a specific wavelength. This process is known as emission.
So, option (c) is the correct answer.
To know more about Hydrogen spectrum , click here :
brainly.com/question/31600120
#SPJ11
identify the type(s) of reaction(is) catalyzed by each of the following enzymes.
Isocitrate dehydrogenase catalyzes the conversion of isocitrate to alpha-ketoglutarate through oxidative decarboxylation.
1. Isocitrate dehydrogenase is an enzyme that is involved in the citric acid cycle, also known as the Krebs cycle or the tricarboxylic acid cycle.
2. The reaction catalyzed by isocitrate dehydrogenase involves the conversion of isocitrate, a six-carbon compound, to alpha-ketoglutarate, a five-carbon compound.
3. This reaction is an oxidative decarboxylation reaction, meaning that it involves the removal of a carbon atom from isocitrate in the form of carbon dioxide, and the transfer of electrons to an electron carrier molecule, NAD+.
4. The electrons transferred to NAD+ are used in the electron transport chain to generate ATP, the primary energy currency of cells.
5. Isocitrate dehydrogenase is an important regulatory enzyme in the citric acid cycle, as it controls the flux of carbon through the cycle and is sensitive to the energy status of the cell.
6. Mutations in the gene encoding isocitrate dehydrogenase have been implicated in a variety of human diseases, including cancer and neurodegenerative disorders.
For more such questions on decarboxylation, click on:
https://brainly.com/question/27182983
#SPJ11
The probable question may be:
Identify The Type(S) Of Reaction(S) Catalyzed By Each Of The Following Enzymes. Isocitrate Dehydrogenase
Isocitrate dehydrogenase is a key enzyme in the citric acid cycle, which catalyses the oxidative decarboxylation of isocitrate, an essential step in cellular respiration.
Isocitrate dehydrogenase is an enzyme that is a part of the Krebs cycle, often known as the tricarboxylic acid (TCA) cycle or the citric acid cycle. This enzyme is essential for the process by which isocitrate is changed into -ketoglutarate during cellular respiration.
Isocitrate dehydrogenase is a catalyst for an oxidative decarboxylation process. It entails the decarboxylation of isocitrate, which removes a carbon dioxide molecule, and the concomitant transfer of electrons to a coenzyme like NAD+ or NADP+. As a result of this process, -ketoglutarate and NADH or NADPH are produced.
A crucial step in the citric acid cycle is the oxidative decarboxylation of isocitrate by isocitrate dehydrogenase because it produces -ketoglutarate, which enters the subsequent reactions of the cycle to produce ATP and other reduced electron carriers, as well as a high-energy electron carrier (NADH or NADPH).
Learn more about enzyme here:
https://brainly.com/question/30884936
#SPJ11
What is the vapor pressure of a solution that contains 2.60 mol glucose dissolved in 100.0 g of water? The vapor pressure of pure water is 2.4 kPa.Answer choices3.5 kPa0.28 kPa0.77 kPa1.6 kPa
The correct answer is 1.6 kPa.
To calculate the vapor pressure of a solution, we need to use Raoult's Law which states that the vapor pressure of a solution is directly proportional to the mole fraction of the solvent in the solution.
First, we need to calculate the mole fraction of water in the solution.
Moles of water = mass/molar mass = 100.0 g / 18.015 g/mol = 5.548 mol
Total moles in solution = 5.548 + 2.60 = 8.148 mol
Mole fraction of water = 5.548/8.148 = 0.680
Mole fraction of glucose = 2.60/8.148 = 0.320
Using Raoult's Law, we can calculate the vapor pressure of the solution:
vapor pressure = mole fraction of water x vapor pressure of pure water
vapor pressure = 0.680 x 2.4 kPa = 1.632 kPa
Therefore, the answer is 1.6 kPa.
To know more about Raoult's Law visit:
https://brainly.com/question/2253962
#SPJ11
true/false. collision frequency per square centimeter of surface made by o2 molecules
The statement "collision frequency per square centimeter of surface made by O2 molecules" is false because it is not clear what surface is being referred to.
In a gas-phase reaction, the rate of reaction is determined by the frequency of collisions between the reactant molecules. The collision frequency is dependent on the concentration of the reactants, their velocities, and the surface area available for collisions.
The rate of collision of O2 molecules with a surface can be expressed as the collision frequency per unit area of the surface, also known as the flux. The flux of O2 molecules is dependent on the concentration of O2 and the velocity of the molecules, as well as the surface area available for collisions.
However, we can say that the collision frequency of O2 molecules with a surface is dependent on the concentration of O2, the velocity of the molecules, and the surface area available for collisions.
For more such questions on collision visit:
https://brainly.com/question/29815006
#SPJ11
calculate the solubility of fe oh 2 in water at 25°c
To calculate the solubility of Fe(OH)2 in water at 25°C, we need to know its solubility product constant (Ksp). The solubility product constant is a measure of the equilibrium between the dissolved and solid states of a sparingly soluble substance.
For Fe(OH)2, the Ksp value at 25°C is approximately 4.87 × 10^-17. We can use this value to find the solubility of Fe(OH)2. First, let's write the balanced chemical equation and the corresponding solubility product expression:
Fe(OH)2 (s) ⇌ Fe²⁺ (aq) + 2 OH⁻ (aq)
Ksp = [Fe²⁺] [OH⁻]²
Let x represent the solubility of Fe(OH)2 in moles per liter. Then, [Fe²⁺] = x and [OH⁻] = 2x. Substitute these values into the solubility product expression:
4.87 × 10⁻¹⁷ = x (2x)²
Solve for x:
4.87 × 10⁻¹⁷ = 4x³
x³ = 1.2175 × 10⁻¹⁷
x = (1.2175 × 10⁻¹⁷)^(1/3)
x ≈ 2.30 × 10⁻⁶6 M
The solubility of Fe(OH)₂ in water at 25°C is approximately 2.30 × 10⁻⁶ moles per liter.
Learn more about chemical here:
https://brainly.com/question/29240183
#SPJ11
Which one of the following compounds is likely to be colorless? Select all that apply and briefly explain your reasoning. a. [Zn(OH2).)** b. [Cu(OH).] c. [Fe(OH2).]
The correct answer would be (a), the compound [Zn(OH₂)] is likely to be colorless.
Which of the given compounds is expected to exhibit a lack of color?Among the given compounds, [Zn(OH₂)] is likely to be colorless. Zinc (Zn) is a transition metal that commonly exhibits colorless or white compounds. The coordination complex [Zn(OH₂)] consists of a central zinc ion coordinated with water ligands (H₂O).
Since water is a relatively weak ligand, it does not cause any significant electronic transitions in the zinc ion, resulting in a lack of color.
On the other hand, [Cu(OH)] and [Fe(OH₂)] are likely to exhibit colors. Copper (Cu) and iron (Fe) are transition metals that often form colored compounds due to the presence of unpaired d electrons.
The presence of hydroxide ligands (OH) can also influence the electronic transitions in the metal ion, leading to the absorption and reflection of specific wavelengths of light, resulting in color.
In summary, the compound [Zn(OH₂)] is expected to be colorless, while [Cu(OH)] and [Fe(OH₂)] may exhibit colors due to the nature of the transition metal ions and the ligands involved.
Learn more about colorless
brainly.com/question/31497699
#SPJ11
A 25.0-mL sample of 0.150 M hydrocyanic acid is titrated with a 0.150 M NaOH solution. What is the pH after 13.3 mL of base is added? The Ka of hydrocyanic acid is 4.9 × 10-10.
5.32
9.25
1.34
9.04
9.37
To determine the pH after adding 13.3 mL of a 0.150 M NaOH solution to a 25.0 mL sample of 0.150 M hydrocyanic acid, we can use the Henderson-Hasselbalch equation.
Calculate the moles of acid and base:
Moles of HCN = concentration × volume = 0.150 M × 0.0250 L = 0.00375 moles
Moles of NaOH = concentration × volume = 0.150 M × 0.0133 L = 0.001995 moles
Since hydrocyanic acid and NaOH react in a 1:1 ratio, the moles of hydrocyanic acid that react with NaOH will be 0.001995 moles.
The remaining moles of hydrocyanic acid after the reaction will be:
Moles of HCN remaining = Moles of HCN - Moles of HCN reacted
= 0.00375 moles - 0.001995 moles
= 0.001755 moles
The concentration of the remaining hydrocyanic acid, we divide the moles by the new volume:
New concentration of HCN = Moles of HCN remaining / New volume
= 0.001755 moles / (25.0 mL + 13.3 mL) / 1000
= 0.001755 moles / 0.0383 L
=0.0457 M
Now, we can use the Henderson-Hasselbalch equation to calculate the pH: pH = pKa + log([A-]/[HA])
Since hydrocyanic acid is a weak acid, we can assume that most of it has dissociated into H+ and CN- ions. Therefore, [A-] will be the concentration of CN- ions, which will be equal to the concentration of the remaining hydrocyanic acid:
[A-] = [HCN] = 0.0457 M
[HA] will be the concentration of the undissociated acid:
[HA] = initial concentration - [A-] = 0.150 M - 0.0457 M = 0.1043 M
Using the Ka value of hydrocyanic acid (4.9 × 10-10), we can calculate the pKa:
pKa = -log(Ka) = -log(4.9 × 10-10) = 9.31
Finally, we can substitute the values into the Henderson-Hasselbalch equation:
pH = 9.31 + log(0.0457/0.1043) = 9.04
Therefore, the pH after adding 13.3 mL of the base is approximately 9.04.
Learn more about Henderson-Hasselbalch equation here ;
https://brainly.com/question/31732200
#SPJ11
how many moles of copper (ii) sulfate (cuso4) are in a 0.125g sample of cuso4?
The moles of the copper (ii) sulfate that is CuSO₄ are in the 0.125g sample of the CuSO₄ is 0.0007 g/mol.
The mass of the copper sulfate, CuSO₄ = 0.125 g
The molar mass of the copper sulfate, CuSO₄ = 159.6 g/mol
The number of moles of copper sulfate, CuSO₄ = mass / molar mass
Where,
The mass of CuSO₄ = 0.125 g
The molar mass of CuSO₄ 159.6 g/mol
The number of moles of copper sulfate, CuSO₄ = mass / molar mass
The number of moles of copper sulfate, CuSO₄ = 0.125 g / 159.6 g/mol
The number of moles of copper sulfate, CuSO₄ = 0.0007 mol
To learn more about moles here
https://brainly.com/question/30885025
#SPJ4
Give the nuclear symbol (isotope symbol) for the isotope of platinum that contains 117 neutrons per atom. nuclear symbol: Give the nuclear symbol (isotope symbol) for the isotope of tin that contains 70 neutrons per atom. nuclear symbol: Give the nuclear symbol (isotope symbol) for the isotope of mercury that contains 122 neutrons per atom. nuclear symbol: help Icontact us terms of use privacy policy about us careers
Platinum has an atomic number of 78, which means it has 78 protons in its nucleus.
- The isotope contains 117 neutrons per atom, which means its mass number is 195 (78 protons + 117 neutrons = 195).
- The chemical symbol for platinum is Pt.
We need to understand the concept of isotopes and their nuclear symbols. Isotopes are atoms of the same element that have the same number of protons but different numbers of neutrons. The nuclear symbol, also known as the isotope symbol, represents an isotope and includes its atomic number, mass number, and chemical symbol. Now, let's use this knowledge to answer your question. The isotope of platinum that contains 117 neutrons per atom can be represented by the nuclear symbol ^194Pt. Here's how we got to this answer:
- Platinum has an atomic number of 78, which means it has 78 protons in its nucleus.
- The isotope contains 117 neutrons per atom, which means its mass number is 195 (78 protons + 117 neutrons = 195).
- The chemical symbol for platinum is Pt.
- Putting all of this information together, we get the nuclear symbol ^194Pt.
Similarly, the isotope of tin that contains 70 neutrons per atom can be represented by the nuclear symbol ^118Sn. Here's how we got to this answer:
- Tin has an atomic number of 50, which means it has 50 protons in its nucleus.
- The isotope contains 70 neutrons per atom, which means its mass number is 120 (50 protons + 70 neutrons = 120).
- The chemical symbol for tin is Sn.
- Putting all of this information together, we get the nuclear symbol ^118Sn.
Finally, the isotope of mercury that contains 122 neutrons per atom can be represented by the nuclear symbol ^204Hg. Here's how we got to this answer:
- Mercury has an atomic number of 80, which means it has 80 protons in its nucleus.
- The isotope contains 122 neutrons per atom, which means its mass number is 202 (80 protons + 122 neutrons = 202).
- The chemical symbol for mercury is Hg.
- Putting all of this information together, we get the nuclear symbol ^204Hg.
To give the nuclear symbols (isotope symbols) for the requested isotopes, we need to determine the atomic number and mass number for each element:
1. For the isotope of platinum with 117 neutrons per atom:
- Atomic number (Z) of platinum (Pt) is 78 (protons in the nucleus).
- Mass number (A) is the sum of protons and neutrons: A = Z + N = 78 + 117 = 195.
- Nuclear symbol: Pt-195
2. For the isotope of tin with 70 neutrons per atom:
- Atomic number (Z) of tin (Sn) is 50 (protons in the nucleus).
- Mass number (A) is the sum of protons and neutrons: A = Z + N = 50 + 70 = 120.
- Nuclear symbol: Sn-120
3. For the isotope of mercury with 122 neutrons per atom:
- Atomic number (Z) of mercury (Hg) is 80 (protons in the nucleus).
- Mass number (A) is the sum of protons and neutrons: A = Z + N = 80 + 122 = 202.
- Nuclear symbol: Hg-202
Learn more about protons, neutrons, and electrons
https://brainly.com/question/29661775
#SPJ11
which pair of substances cannot form a buffered aqueous solution?18)a)hno3 and nano3b)hcn and kcnc)hf and nafd)hno2 and nano2e)nh3 and (nh4)2so4
The pair of substances that cannot form a buffered aqueous solution is (a) HNO₃ and NaNO₃ because a buffered solution is one that resists changes in pH when an acid or base is added to it.
To form a buffered solution, there needs to be a weak acid and its corresponding conjugate base or a weak base and its corresponding conjugate acid in the solution. HNO₃ is a strong acid, which means it completely dissociates in water to form H+ ions and NO₃⁻ ions. NaNO₃ is a salt of a strong acid and strong base, which also completely dissociates in water to form Na+ ions and NO₃⁻ ions.
Therefore, there are no weak acids or bases present in the solution, making it impossible to form a buffered solution. The other pairs of substances mentioned in the question, HCN and KCN, HF and NaF, HNO₂ and NaNO₂, and NH₃ and (NH₄)₂SO₄, all contain a weak acid and its corresponding conjugate base or a weak base and its corresponding conjugate acid, which means they can form buffered solutions.
You can learn more about buffered solutions at: brainly.com/question/13169083
#SPJ11
when the following equation is balanced properly under acidic conditions, what are the coefficients of the species shown? h3aso3 clo3- h3aso4 cl-
To balance the equation properly under acidic conditions, we need to consider the oxidation states of the elements involved and apply the appropriate coefficients.
The balanced equation for the reaction between H3AsO3 and ClO3- to form H3AsO4 and Cl- is:
H3AsO3 + ClO3- -> H3AsO4 + Cl-
To balance the equation :
Balance the least abundant element first. In this case, arsenic (As) is present in both H3AsO3 and H3AsO4, so we can balance it last.
Balance oxygen (O) by adding H2O molecules as needed. In the reactants, there are three oxygen atoms in H3AsO3 and three in ClO3-, while in the products, there are four in H3AsO4. To balance oxygen, we add H2O on the reactant side:
H3AsO3 + ClO3- -> H3AsO4 + Cl- + H2O
Balance hydrogen (H) by adding H+ ions as needed. In the reactants, there are three hydrogen atoms in H3AsO3, while in the products, there are three in H3AsO4. Therefore, we need to balance hydrogen by adding three H+ ions on the reactant side:
H3AsO3 + ClO3- + 3H+ -> H3AsO4 + Cl- + H2O
Balance the charge by adding electrons (e-) as needed. In this case, the charges are already balanced.
Now, the balanced equation under acidic conditions is:
H3AsO3 + ClO3- + 3H+ -> H3AsO4 + Cl- + H2O
The coefficients of the species are:
H3AsO3: 1
ClO3-: 1
H+: 3
H3AsO4: 1
Cl-: 1
H2O: 1
Learn more about electrons here : brainly.com/question/12001116
#SPJ11
PLEASE HELP ME OUT!!!!
Which substance will have the greatest increase in temperature when equal masses absorb equal amounts of thermal energy? (Specific heats are given in parentheses. )
a. Water (4. 18 J/goC) c. Aluminum metal (0. 90 J/goC)
b. Ammonia gas (2. 1 J/goC) d. Solid calcium (0. 476 J/goC)
Among the given options, solid calcium will have the greatest increase in temperature when equal masses of these substances absorb equal amounts of thermal energy. This is because solid calcium has the lowest specific heat capacity, meaning it requires less heat energy to increase its temperature compared to the other substances.
The substance that will have the greatest increase in temperature when equal masses absorb equal amounts of thermal energy is the substance with the lowest specific heat capacity. Specific heat capacity is the amount of heat energy required to raise the temperature of a substance by a certain amount. Looking at the given options, we can compare the specific heat capacities of water, ammonia gas, aluminum metal, and solid calcium. Water has the highest specific heat capacity of 4.18 J/goC, which means it requires a large amount of heat energy to raise its temperature. Ammonia gas has a specific heat capacity of 2.1 J/goC, aluminum metal has a specific heat capacity of 0.90 J/goC, and solid calcium has the lowest specific heat capacity of 0.476 J/goC. Therefore, among the given options, solid calcium will have the greatest increase in temperature when equal masses of these substances absorb equal amounts of thermal energy. This is because solid calcium has the lowest specific heat capacity, meaning it requires less heat energy to increase its temperature compared to the other substances.
For more question on energy
https://brainly.com/question/29339318
#SPJ8
what is the ph of a buffer solution made by adding 0.010 mole of solid naf to 50. ml of0.40 m hf? assume no change in volume. ka (hf) = 6.9xl0-4
The pH of the buffer solution made by adding 0.010 mole of solid naf to 50. ml of0.40 m hf is 3.16.
The Henderson-Hasselbalch equation, which links the pH of a buffer solution to the dissociation constant (Ka) of the weak acid and the ratio of its conjugate base to acid, must be used to calculate the pH of the buffer solution created by adding 0.010 mole of solid NaF to 50 ml of 0.40 M HF.Calculating the concentration of HF and NaF in the solution following the addition of solid NaF is the first step. The new concentration of HF may be determined using the initial concentration and the quantity of HF present before and after the addition of NaF because the volume of the solution remains constant: Amount of HF in moles prior to addition = 0.40 M x 0.050 = 0.02 moles After addition, the amount of HF is equal to 0.02 moles minus 0.01 moles.
New HF concentration is equal to 0.01 moles per 0.050 litres, or 0.20 M.
The amount of NaF added divided by the total volume of the solution gives the solution's concentration in NaF.NaF concentration: 0.010 moles per 0.050 litres, or 0.20 M. The Henderson-Hasselbalch equation is now applicable: pH equals pKa plus log([A-]/[HA]). where [A-] is the concentration of the conjugate base (NaF), [HA] is the concentration of the weak acid (HF), and [pKa] is the negative logarithm of the dissociation constant of HF (pKa = -log(Ka) = -log(6.9x10-4) = 3.16).
For more such questions on solid
https://brainly.com/question/23864332
#SPJ11
When a 1. 50 g sample of a compound containing only carbon and sulfur is burned, 0. 87 g of C02 and 2. 53 g of SO2 are produced. Determine the simplest formula of this compound
The simplest formula of the compound containing carbon and sulfur, we need to analyze the masses of carbon dioxide (CO2) and sulfur dioxide (SO2) produced during combustion.
First, we need to calculate the number of moles of CO2 and SO2 produced. We can use the molar mass of each compound to convert the masses into moles.
The molar mass of CO2 is 12.01 g/mol (carbon) + 2 * 16.00 g/mol (oxygen) = 44.01 g/mol.
The number of moles of CO2 is calculated as follows:
moles of CO2 = mass of CO2 / molar mass of CO2 = 0.87 g / 44.01 g/mol ≈ 0.0197 mol.
Similarly, the molar mass of SO2 is 32.07 g/mol (sulfur) + 2 * 16.00 g/mol (oxygen) = 64.07 g/mol.
The number of moles of SO2 is calculated as follows:
moles of SO2 = mass of SO2 / molar mass of SO2 = 2.53 g / 64.07 g/mol ≈ 0.0395 mol.
Next, we need to determine the ratio of carbon to sulfur in the compound. By comparing the number of moles, we find that the ratio is approximately 0.0197 mol (carbon) to 0.0395 mol (sulfur).
To simplify this ratio, we divide both values by the smaller value (0.0197 mol) to obtain the simplest whole number ratio:
0.0197 mol / 0.0197 mol = 1 (carbon)
0.0395 mol / 0.0197 mol ≈ 2 (sulfur)
Therefore, the simplest formula of the compound is CS2 (carbon disulfide), with one carbon atom bonded to two sulfur atoms.
Learn more about carbon dioxide (CO2) here
https://brainly.com/question/21185633
#SPJ11
how many rings are present in c18h29bro3? this compound consumes 2 mol of h2 on catalytic hydrogenation. enter your answer in the provided box.
In the compound C18H29BrO3, there are 7 rings present. However, we don't have enough information about the connectivity of the atoms in the molecule. Therefore, it is not possible to give a detailed answer to this question without additional information.
Regarding the second part of the question, catalytic hydrogenation of c18h29bro3 consumes 2 mol of h2, which means that each molecule of the compound reacts with two molecules of hydrogen gas. This information can be used to calculate the stoichiometry of the reaction and the amount of product formed under specific conditions.
When the compound consumes 2 moles of H2 during catalytic hydrogenation, it means that two double bonds or other unsaturated bonds are present. The general formula for an acyclic alkane is CnH(2n+2). Since this compound has 18 carbons, the number of hydrogens in a saturated alkane would be 2(18) + 2 = 38.
Now, let's compare the actual number of hydrogens in the given compound with the expected number for a saturated alkane. The compound has 29 hydrogens, which is 9 less than the expected number (38 - 29 = 9).
Considering that it consumed 2 moles of H2, we can infer that there are 2 double bonds or other unsaturated bonds (each consuming 1 mole of H2) in the compound. This means there are 7 remaining unsaturations that can be attributed to rings. So, in the compound C18H29BrO3, there are 7 rings present.
Learn more about hydrogen bonds
https://brainly.com/question/31018544
#SPJ11
determine the structure of the compound with chemical formula c8h11n using the following 1h-nmr data: s(6h), 2.34 δ s(2h), 6.27 δ s(2h), 6.36 δ s(1h), 6.71 δ
Based on the 1H-NMR data provided, the compound with chemical formula C8H11N has the following structure:CH3-CH2-CH2-CH2-CH2-CH2-N-CH=CH. The presence of six signals at 6H suggests that there are six hydrogen atoms that are chemically equivalent, meaning they are attached to the same type of carbon atom. This indicates the presence of a hexyl chain (CH3-CH2-CH2-CH2-CH2-CH2-).
- The presence of two signals at 2H indicates the presence of a di-substituted ethylene group (-CH=CH-) in the molecule.
- The signal at 6.71 δ indicates the presence of a hydrogen atom attached to an sp2 hybridized carbon, likely part of the di-substituted ethylene group.
- The signals at 6.27 and 6.36 δ indicate the presence of two hydrogen atoms attached to two separate sp2 hybridized carbon atoms, also part of the di-substituted ethylene group.
- Since there are no other hydrogen atoms present, it can be concluded that the remaining hydrogen atom is attached to the nitrogen atom, completing the structure as shown above.
Based on the given 1H-NMR data for the compound with the chemical formula C8H11N, the structure can be determined as follows:
1. A singlet (s) at 2.34 δ with 6 hydrogens (6H) suggests a CH3 group attached to an electronegative atom, like nitrogen (N). There are two of these groups since 6H are present.
2. A singlet (s) at 6.27 δ with 2 hydrogens (2H) indicates a CH2 group that is part of an aromatic ring.
3. A singlet (s) at 6.36 δ with 1 hydrogen (1H) represents a CH group in the aromatic ring, possibly ortho or para to the CH2 group.
4. A singlet (s) at 6.71 δ with 2 hydrogens (2H) suggests another CH2 group that is part of the aromatic ring and adjacent to the nitrogen atom.
Based on this information, the structure of the compound can be determined as N,N-dimethyl-2,5-dihydroxyaniline. The aromatic ring contains a primary amine (NH2) group with two methyl groups (CH3) attached to the nitrogen atom, and hydroxyl (OH) groups at positions 2 and 5.
To know more about NMR visit:
https://brainly.com/question/29885193
#SPJ11
A sample of neon gas collected at a pressure of 288 mm Hg and a temperature of 277 K has a mass of 16.2 grams. The volume of the sample is ....... L.
To find the volume of the sample of neon gas, we need to use the Ideal Gas Law equation which relates the pressure, volume, temperature, and mass of a gas. The equation is given as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.
We are given the pressure (P), temperature (T), and mass (m) of the neon gas. However, we need to find the volume (V) of the gas. To do this, we need to rearrange the Ideal Gas Law equation as follows:
V = (nRT) / P
Since we are not given the number of moles of neon gas, we can use the mass and molar mass of neon to calculate the number of moles. The molar mass of neon is 20.18 g/mol, so the number of moles of neon gas in the sample is:
n = m / M
n = 16.2 g / 20.18 g/mol
n = 0.803 mol
Now we can substitute the given values into the rearranged Ideal Gas Law equation:
V = (nRT) / P
V = (0.803 mol x 0.0821 L/mol K x 277 K) / 288 mmHg
V = 0.016 L
Therefore, the volume of the sample of neon gas collected at a pressure of 288 mmHg and a temperature of 277 K with a mass of 16.2 grams is 0.016 L.
Learn more about Ideal Gas Law here ;
https://brainly.com/question/6534096
#SPJ11
sodium benzoate (nac6h5coo) is a common food preservative. what is the ph of a 0.150 m nac6h5coo solution? (ka value for benzoic acid = 6.46 × 10−5) hint: sodium benszoate is a weak base.
The pH of a 0.150 M NaC6H5COO (sodium benzoate) solution is approximately 8.15.
Sodium benzoate (NaC6H5COO) is the salt of benzoic acid (C6H5COOH), which is a weak acid. When the salt dissolves in water, it dissociates to form its respective ions: NaC6H5COO (s) → Na+ (aq) + C6H5COO- (aq)
The C6H5COO- ion can act as a weak base and undergo a hydrolysis reaction with water: C6H5COO- (aq) + H2O (l) ⇌ C6H5COOH (aq) + OH- (aq)
The equilibrium constant for this reaction is the base dissociation constant (Kb) of the C6H5COO- ion. We can relate the Kb of the base to the Ka of the acid (benzoic acid) using the equation: Kw = Ka x Kb
where Kw is the ion product constant for water (1.0 x 10^-14 at 25°C).
Rearranging the equation gives: Kb = Kw / Ka
Kb = 1.0 x 10^-14 / 6.46 x 10^-5
Kb = 1.55 x 10^-10
The Kb value allows us to calculate the concentration of OH- ions formed when the sodium benzoate salt is dissolved in water. We can then use the concentration of OH- ions to calculate the pH of the solution.
To begin, we need to find the concentration of the sodium benzoate salt. We are given that the solution is 0.150 M NaC6H5COO.
The hydrolysis reaction of the C6H5COO- ion produces one OH- ion for every one C6H5COO- ion that reacts. Therefore, the concentration of OH- ions can be calculated by multiplying the initial concentration of the NaC6H5COO salt by the Kb of the C6H5COO- ion and taking the square root of the product:
[OH-] = √(Kb x [NaC6H5COO])
[OH-] = √(1.55 x 10^-10 x 0.150)
[OH-] = 7.08 x 10^-6 M
The concentration of OH- ions allows us to calculate the pH of the solution using the equation:
pH = 14 - pOH
pH = 14 - (-log[OH-])
pH = 14 - (-log(7.08 x 10^-6))
pH = 8.15
Therefore, the pH of a 0.150 M NaC6H5COO solution is approximately 8.15.
Know more about hydrolysis reaction here
https://brainly.com/question/11461355#
#SPJ11
why do ice crystals grow faster than liquid droplets in cold clouds?
Ice crystals grow faster than liquid droplets in cold clouds because they have a lower vapor pressure than liquid droplets.
This means that water molecules are more likely to evaporate from liquid droplets than from ice crystals, leading to slower growth rates for liquid droplets.
Additionally, ice crystals can attract and absorb water vapor from the surrounding air more effectively than liquid droplets, further contributing to their faster growth.
As a result, ice crystals can grow large enough to eventually fall as precipitation, while liquid droplets remain suspended in the cloud.
In summary, ice crystals grow faster than liquid droplets in cold clouds due to their lower vapor pressure and the ability to attract and absorb water vapor more effectively.
These factors lead to the accumulation of water molecules on the surface of ice crystals and their faster growth. Eventually, the ice crystals become large enough to fall as precipitation, while liquid droplets remain suspended in the cloud.
To learn more about precipitation, refer below:
https://brainly.com/question/18109776
#SPJ11