Common bra i a copper and zinc alloy containing 37. 0% zinc by ma and having a denity of 8. 48 g/cm3. A fitting compoed of common bra ha a total volume of 129. 5 cm3. How many atom of copper doe the fitting contain?

There are approximately 3.37 x 10^24 molecules of H2SO4 in 55.0 g of H2SO4.

The number of molecules in 55.0 g of H2SO4 can be calculated by first determining the number of moles of H2SO4 present, and then using Avogadro's number to convert moles to molecules.

The molar mass of H2SO4 is 98.08 g/mol, so we can calculate the number of moles present as follows:

number of moles = mass / molar mass = 55.0 g / 98.08 g/mol = 0.561 mol

Next, we can use Avogadro's number, which is 6.022 x 10^23 particles per mole, to convert moles to molecules:

number of molecules = number of moles x Avogadro's number = 0.561 mol x 6.022 x 10^23 particles/mol = 3.37 x 10^24 molecules.

So, there are approximately 3.37 x 10^24 molecules of H2SO4 in 55.0 g of H2SO4.

Learn more about molar mass here: https://brainly.com/question/22997914

#SPJ4

Despite being a non-polar molecule, BCl3 forms polar bonds due of its trigonal planar structure.

Describe electronegativity.

An atom's propensity to draw electrons to itself is measured by its electronegativity. It controls the distribution of the shared electrons between the two atoms in a bond. An atom's electronegativity increases with how strongly its bonds draw electrons, or vice versa.

Due to the difference in electronegativity between boron and chlorine, the bonds in BCl3 are polar. Cl has a 3.16 electronegativity, and B is 2.04. Trigonal planar geometry describes BCl3. This compound contains three polar B-Cl bonds, however because of the symmetry in its structure, all of the bond dipoles cancel one another out, giving the molecule a zero resultant dipole moment. Therefore, BCl3 is polar.

To learn more about electronegativity use link below:

https://brainly.com/question/24977425

#SPJ4

Cr(C₂H₃O₂)₃(aq) + 3 NH₄CO₃(aq) → Cr(CO₃)₃(s) + 3 NH₄C₂H₃O₂(aq)

The balanced chemical equation for this reaction is:

Cr(C₂H₃O₂)₃(aq) + 3 NH₄CO₃(aq)  →  Cr(CO₃)₃(s) + 3NH₄C₂H₃O₂(aq)

A balanced chemical reaction is a chemical equation in which the number of atoms of each element is the same on both sides of the equation. This means that the equation satisfies the law of conservation of matter, which states that matter cannot be created or destroyed in a chemical reaction. Balancing a chemical equation involves adjusting the coefficients (the numbers in front of the chemical formulas) so that the number of atoms of each element is equal on both sides of the equation.

To know more about atoms, visit:

https://brainly.com/question/29695801

#SPJ4

The net ionic equation for this reaction is Cr3+ + CO3 2- → Cr(CO3)3 (s).

Reaction is the response of a system to certain stimuli. It is a process in which an organism or inanimate object responds to external stimuli by a physical or chemical change. It can be a physical or chemical process, in which some form of energy is transformed into another form of energy. Reactions can be as simple as a single chemical reaction or as complex as a series of biochemical reactions. In addition, reactions can be either spontaneous or catalyzed, meaning that they are either initiated by an external force or caused by the presence of a catalyst.

The reaction occurs when aqueous solutions of chromium(III) acetate and ammonium carbonate are combined. The reaction is a precipitation reaction, in which a solid precipitate is formed from the reaction of two aqueous solutions. The net ionic equation for this reaction is:

Cr3+ + CO3 2- → Cr(CO3)3 (s)

In this equation, chromium(III) cations (Cr3+) react with carbonate anions (CO3 2-) to form an insoluble chromium(III) carbonate precipitate (Cr(CO3)3 (s)).

To learn more about reaction
https://brainly.com/question/24795637
#SPJ4

Answer:

95.50%.

Explanation:

The table salt (NaCl) in the mixture can be determined by using the mass of carbon dioxide produced from burning the mixture. When table salt is burned, it releases NaCl (s) and forms NaCl (aq). The NaCl (aq) reacts with water to form HCl (aq) and NaOH (aq). The reaction with NaCl (aq) and water is shown below:

NaCl (aq) + H2O (l) → NaOH (aq) + HCl (aq)

When the 6.00 g sample of the mixture was burned, 3.20 g of carbon dioxide was produced. The carbon dioxide was produced by the combustion of the sugar in the mixture. The formula for sugar is C12H22O11, and when it is burned, it forms carbon dioxide and water. The reaction is shown below:

C12H22O11 (s) + 12O2 (g) → 12CO2 (g) + 11H2O (l)

From the mass of carbon dioxide produced, the mass of sugar in the original 6.00 g sample can be calculated. The mass of sugar in the sample is equal to the mass of carbon dioxide produced divided by 12 (the number of moles of carbon dioxide produced from the combustion of one mole of sugar). The mass of sugar in the sample is 3.20 g / 12 = 0.267 g.

Since the mass of the sugar in the sample is known, the mass of the table salt in the sample can be determined. The mass of table salt in the sample is equal to the total mass of the sample minus the mass of the sugar. The mass of table salt in the sample is 6.00 g - 0.267 g = 5.73 g.

Finally, the mass percentage of the table salt in the mixture can be calculated. The mass percentage of table salt in the mixture is equal to the mass of the table salt divided by the total mass of the sample and multiplied by 100%. The mass percentage of the table salt in the mixture is 5.73 g / 6.00 g x 100% = 95.50%.

Therefore, the mass percentage of table salt in the mixture is 95.50%.

NH3 is commonly used for manufacturing fertilizer.

What do you mean by fertilizer?

A fertilizer is a material, either natural or artificial, that contains chemical components (such as nitrogen (N), phosphorus (P), and potassium (K)) that promotes the development and productivity of plants. The words "enrichment" and "plant nutrition" are a few synonyms.

Ammonia or its solutions are the primary straight fertilizer that contains nitrogen. Another extensively utilized substance is ammonium nitrate (NH4NO3). Another widely used nitrogen source is urea, which has the advantages of being solid and non-explosive in contrast to ammonia and ammonium nitrate, respectively. In order to replenish the soil's decreased supply of vital nutrients for plant growth, fertilizers are used.

To learn more about fertilizers  use link below:

https://brainly.com/question/24544067

#SPJ4

A martini is a mixed drink created by combining 2 part gin, 1 part vermouth, and 1 olive. "2 parts gin, 1 part vermouth, and 1 olive" is the recipe or formula for making a martini. Therefore, option B is correct.

A recipe is a text that contains instructions for cooking or baking food. It instructs the cook on what ingredients to use, how to use them, and any nutritional facts that may be relevant.

Recipe and receipt both derive from the Latin verb recipere, which means "to receive or take," with receipt taking a detour through Old North French and Middle English. However, receipts were once used for what we now call recipes. My grandmother used to make a delicious dense and yellow cake.

Thus, "2 parts gin, 1 part vermouth, and 1 olive" is the recipe or formula for making a martini, option B is correct.

To learn more about the recipe, follow the link;

https://brainly.com/question/1320828

#SPJ1

Hydrofluoric acid, HF, Ka = 7.2 x 10-4 has the greatest acid strength (the strongest acid).

What is acid?

Acid is a substance that has a sour taste, is corrosive, and can react with other substances to form salts. Acids have a pH level lower than 7, making them acidic and can be found in nature in the form of citrus fruits, vinegar, and even in rainwater. Acids are used in the laboratory for a variety of purposes, including titrations, neutralizing bases, and even in chemical syntheses. Acids have a wide range of applications, from cleaning agents to antacids, baking soda, and even food and beverage production.

Therefore, Hydrofluoric acid, HF, Ka = 7.2 x 10-4 has the greatest acid strength (the strongest acid).

To learn more about acid

Here: https://brainly.com/question/25148363

#SPJ4

The grams of NaCl will be needed to form 600 mL of a saturated solution at 100°C is found to be 240g

A solution is said to be saturated when it has dissolved all of the solute it can. At a specific temperature, no further solute can dissolve in a saturated solution. By attempting to dissolve the solute so that no more can be done, we can create a saturated solution.

saturation of NaCl at 100 ° C = 40 g / 100 ml.

For 100 mL of solution => 40g NaCl

600mL of solution => 40 x 600 / 100

                         => 240 g

Solutions that contain less dissolved solute than the solvent's saturation point are referred to as unsaturated solutions (at that specific temperature gradient). A solution is considered to as a saturated solution if the amount of dissolved solute equals the solvent's saturation point.

Learn more about saturated solution here:

brainly.com/question/1851822

#SPJ4

A typical atom has a diameter of about:

a) 1.8 x 10^-8 inches

b) 2.2 x 10^ 48 atoms along a 1.0 cm line.

a)The diameter of a typical atom is 4.56 x 10^-10 m. To convert this to inches, we can use the conversion factor of 1 m = 39.37 inches.

Diameter (inches) = 4.56 x 10^-10 m * 39.37 inches/m = 1.79 x 10^-8 inches

b)The number of atoms along a 1 cm line can vary widely depending on the material and conditions. However, as a rough estimate, it is possible to assume that there are roughly 10^22 atoms in 1 cm^3 of a solid material. This would give us an average of 10^22 / (10^-8 cm)^2 = 10^22 / 10^-16 = 10^38 atoms per cm^2 along a line.

To find the number of atoms along a 1 cm line, we can divide the number of atoms per cm^2 by the height of the layer of atoms, which is roughly equal to the diameter of an atom (4.56 x 10^-10 m).

This gives us an estimated number of atoms along a 1 cm line of 10^38 / (4.56 x 10^-10 m) = 2.19 x 10^48 atoms per cm. Note that this is a rough estimate, and the actual number of atoms can vary significantly depending on the specific material and conditions.

Therefore, A typical atom has a diameter of about:

a) 1.8 x 10^-8 inches

b) 2.2 x 10^ 48 atoms along a 1.0 cm line.

To know more about diameter refer to:

brainly.com/question/4894307

#SPJ4

There is 430.75 ml of water in a 455 ml bottle of vinegar. If vinegar is sold as a 5.00% (v/v) solution of acetic acid, then 5% of the solution is acetic acid and 95% of the solution is water.

Acetic acid is a colorless, volatile liquid with a pungent, sour odor. It has the chemical formula CH3COOH and is the main component of vinegar.

Acetic acid is used in the production of a wide range of products, including vinyl acetate, acetic anhydride, ester solvents, and plasticizers. It is also used as a solvent for many industrial and household cleaning products, as well as a food preservative and flavoring agent.

To find the amount of water in a 455 ml bottle of vinegar, we can use the following calculation:

The volume of water = Volume of solution x Percentage of water / 100

Volume of water = 455 ml x 95 / 100

Volume of water = 430.75 ml

So, there is 430.75 ml of water in a 455 ml bottle of vinegar.

To know more about Vinegar here: https://brainly.com/question/13865341

#SPJ4

Answer:

15.625 g

Explanation:

Forward and reverse reactions in chemical reactions are always in dynamic balance and can occur simultaneously as long as all reactants and products are present.

At dynamic equilibrium, the rate of the forward reaction equals the rate of the reverse reaction, resulting in no net change in reactant and product concentrations over time. This state is affected by factors such as temperature, pressure, and reactant concentration, and it can be changed by changing the conditions. Dynamic equilibrium is a key concept in understanding the behavior of chemical systems and is important in a variety of industrial processes and natural phenomena.

Learn more about dynamic equilibrium:

brainly.com/question/2363073

#SPJ4

The tendency of an atom to favor eight electrons in its valence shell is known as the "octet rule." Less than eight electrons per atom increase the likelihood of interaction, which leads to more stable compounds. Atoms will respond in order to achieve the most stable state.

When there are eight electrons around the atom, the arrangement is stable. Own electrons and some shared electrons can combine to form this octet. As a result, an atom keeps creating connections until an octet of electrons is formed. Lewis refers to this as the "octet rule."

Due to the fact that all orbitals will be filled, a whole octet is exceedingly stable. Atoms with higher levels of stability have less energy, therefore reactions that boost atom stability will release energy in the form of heat or light, whereas reactions that lower stability must absorb energy, making the environment colder.

Learn more about octet rule here https://brainly.com/question/865531

#SPJ4

The dipole moment of the molecule CF2O is directed from the carbonyl fluorine atoms towards the carbon atom. Keq = 10(-2.4 - (-5.5)) = 10(2.9) = 8103 is the equilibrium constant for the acid-base reaction between ethanol and hydrobromic acid.

Chemically, carbonyl fluoride has the formula COF2. It is an oxohalide of carbon. This gas is colourless and extremely hazardous, just like its counterpart, phosgene. The molecule has a planar structure, C2v symmetry, bonds that are 1.174 and 1.312 Angstroms long for the C=O and C-F, respectively, and an F-C-F bond angle of 108.0. When fluorinated hydrocarbons are thermally decomposed, carbonyl fluoride is typically formed as a byproduct, for instance from trifluoromethanol or tetrafluoromethane in the presence of water:

CFCOF 2 + 2 HF = 4 + H 2O

The oxidation of carbon monoxide and the interaction of phosgene with hydrogen fluoride can also produce carbonyl fluoride, albeit the latter has a tendency to overoxide into carbon tetrafluoride. It is practical to oxidise carbon monoxide using silver difluoride:

CO + 2COF 2 + 2 AgF = AgF 2

In the presence of water, carbonyl fluoride hydrolyzes to produce carbon dioxide and hydrogen fluoride.

CO2 + 2 HF = COF 2 + H 2O.

To know more about carbonyl fluoride please refer:

https://brainly.com/question/14777564

#SPJ4

1. Ask a question: This is the first step of the scientific method, in which you must ask a question about a phenomenon or problem that needs to be solved.

2. Do background research: Before you can begin to answer your question, you must do some background research on the subject. This will help you develop a better understanding of the problem and possible solutions.

3. Construct a hypothesis: A hypothesis is an educated guess about the possible outcomes of the research. It is important to remember that the hypothesis is not a fact, but an educated guess.

4. Test your hypothesis: Once you have developed a hypothesis, you must test it to see if it is correct. This can be done through experiments or observations.

5. Analyze your data and draw conclusions: After you have completed your tests, you must analyze the data and draw conclusions from it. This will help you determine if your hypothesis was correct or not.

6. Report your results: Once you have completed your research and drawn conclusions, you must report your findings. This can be done through a written report or a presentation.

7. Formulate a theory: After you have reported your results, you can formulate a theory about the phenomenon or problem. This theory can be tested in the future to see if it is accurate.

What is phenomenon?

Phenomenon in chemistry is a term used to describe a unique and observable event or occurrence. It can refer to a physical or chemical process, the result of a reaction, or the behavior of a substance under certain conditions.

To learn more about phenomenon

Here: https://brainly.com/question/29135126

#SPJ4

The 1H-NMR spectrum provided belongs to structure II.

What is the purpose of 1H NMR spectroscopy?

The structural analysis of molecules is typically accomplished using the spectroscopic method known as proton nuclear magnetic resonance (1H NMR).

                       Since they are symmetrical to one another and share the same bonding, both methyl groups are identical. The spectrum of the 1H NMR contains a total of three signals.

What is the NMR's range?

Depending on the magnetic field intensity and the particular nucleus being researched, this minute energy differential (E) is often expressed for nmr purposes as a frequency in MHz (106 Hz), ranging from 20 to 900 Mz.

Learn more about The 1H-NMR spectrum

brainly.com/question/29389817

#SPJ4

A radioactive isotope has decayed so that 1/32 of the original content is left.  the actual amount has been halved 5 times. This means that 5 half-lives have passed.

Half-life is a concept used in radioactive decay to describe the amount of time it takes for half of a given amount of radioactive isotope to decay. Each half-life is the time it takes for half of the remaining radioactive atoms to decay. After one half-life, the amount of the radioactive isotope decreases by half, after two half-lives, the amount decreases by half again, and so on.

In the case of the isotope we're discussing, we start with the original amount of the isotope and find that 1/32 of it remains after some period of time. By dividing the remaining amount by 2 repeatedly, we determine that it has been halved 5 times. Therefore, 5 half-lives have passed.

To know more about radioactive isotopes, visit:https://brainly.com/question/28039996

#SPJ4

The amount, in grams, of [tex]Fe_2O_3[/tex] formed from 16.7 g of Fe and oxygen would be 23.856 grams.

Iron (Fe) combines with oxygen (O2) to form Fe2O3 according to the following equation:

[tex]4Fe + 3O_2 --- > 2Fe_2O_3[/tex]

Mole equivalence of 16.7 g of Fe = 16.7/56 = 0.2982 mol

From the balanced equation of the reaction, the mole ratio of Fe and Fe2O3 is 2:1, thus, the equivalent mole of Fe2O3 produced from 0.2982 mol of Fe would be:

   0.2982/2 = 0.1491 mol

Mass of 0.1491 mol Fe2O3 = 0.1491 x 160

                                            = 23.856 grams

In other words, the amount of Fe2O3 formed is 23.856 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

The Beer's Law equation is A = εlc, where A is the absorbance, ε is the molar absorptivity, l is the path length (1.0 cm in this case), and c is the concentration.

Rearranging the equation, we can solve for ε: ε = A / (lc) = A / (l * c).

Since the equation given is Y = 15200x - 0.18, where x is the concentration,

we can use it to find the absorbance (A) at a given concentration.

For a concentration of x = 0.005 M, the absorbance (A) can be found by substituting the values into the equation: Y = 15200x - 0.18,

Y = 15200 * 0.005 - 0.18

Y= 0.76.

Therefore, the molar absorptivity (ε) at a wavelength of 542 nm for a concentration of 0.005 M can be calculated as:

ε = A / (lc)

Substitute the value in above equation we get,

= 0.76 / (1.0 * 0.005)

= 152 M^-1cm^-1.

for such more question on Beer's Law equation

https://brainly.com/question/29352272

#SPJ4

The number of moles that contains 5.3 × 10¹² particles of water is 8.8 × 10-¹² moles.

The number of moles in a substance can be calculated by dividing the number of atoms/molecules in the substance by Avogadro's number as follows:

no of moles = no of atoms ÷ 6.02 × 10²³

According to this question, a container contains 5.3 × 10¹² particles of water. The number of moles can be calculated as follows:

no of moles = 5.3 × 10¹² ÷ 6.02 × 10²³

no of moles = 8.8 × 10-¹² moles

Therefore, 8.8 × 10-¹² moles is present in the water molecule.

Learn more about number of moles at: https://brainly.com/question/14919968

#SPJ1

When an aqueous solution of NaOH will be added to an aqueous solution of potassium dichromate, K₂Cr₂O, the dichromate ion is converted to Cro₄²⁻.

K₂Cr₂O₇ + 2NaOH → K₂Cr₂O₄ + Na₂CrO₄ + H₂O  

Potassium dichromate,(K₂Cr₂O₇), is a common inorganic chemical reagent, which is most commonly used as an oxidizing agent in various laboratory as well as industrial applications. As with all hexavalent chromium compounds, it is acutely and chronically harmful for health. It is a crystalline ionic solid having a very bright, red-orange color. This salt is popular in laboratory because it is not a deliquescent, in contrast to the more industrially relevant salt of sodium dichromate.

To know more about potassium dichromate here

https://brainly.com/question/18851117

#SPJ4

Carbon atoms 1 and 4 have an anti conformation.

Butane can exist in four different "extreme" conformations: 1) Complete eclipse, where the methyl groups completely block each other; 2) Gauche, in which the methyl groups are spaced apart but close to one another; 3) Eclipsed, in which the methyl groups cover hydrogen atoms; and 4) Anti, in which the methyl groups are spaced apart but as far apart as possible.

The two methyl groups are as far apart from one another as they can be, with a dihedral angle of 180 degrees, in the most stable conformation. Anti describes this specific staggered structure. The alternative staggered conformation is referred to as gauche and has an Me-Me dihedral angle of 60 degrees.

Due to steric strain, which is the repulsive interaction brought on by the two bulky methyl groups being pressed too close together, the gauche conformation has a greater energy valley than the anti conformation. There is no doubt that the anti conformation has less steric strain.

To learn more about Eclipsed conformation

https://brainly.com/question/27853234

#SPJ4

The Marble will reacts with the hydrochloric acid solution to form the calcium chloride solution, the water, and carbon dioxide. The percent yield of carbon dioxide is 73.8 %.

The balanced chemical  reaction is as :

CaCO₃  +   2HCl   ----->   CaCl₂  +  H₂O  +   CO₂

The mass of carbon dioxide = 112 g

The mass of the calcium carbonate = 344.7 g

The moles of calcium carbonate  = mass / molar mass

                                                       = 344.7 / 100

                                                       = 3.447 mol

1 mole of CaCO₃ produces 1 mole CO₂

The Moles of CO₂ = 3.447 mol

The mass of CO₂ = moles × molar mass

                             = 3.447 × 44

                             = 151.66 g

The percent yield of carbon dioxide = ( 112 / 151.66 ) × 100 %

                                                             = 73.8 %

To learn more about percent yield here

https://brainly.com/question/30363451

#SPJ4

There is just one sort of chemically non-equivalent hydrogen in the butane molecule CH3CH2CH2CH3, which has a total of 8 chemically equivalent hydrogens.of the following compounds? a the

The universe's lightest and most prevalent chemical element is hydrogen. It is a diatomic molecule that exists as a tasteless, odourless, and colourless gas .Aside from being used as a car fuel, hydrogen is also used to make chemicals and as a coolant for massive refrigeration systems. Due to the fact that burning hydrogen only yields water, it has recently attracted interest as a clean energy source. Because traditional fossil fuels emit hazardous pollutants into the atmosphere, this makes it an appealing substitute. However, because it is frequently generated using fossil fuels, which produces pollutants, the manufacturing of hydrogen still faces difficulties. There is continuous research into environmentally friendly manufacturing techniques including electrolysis using renewable energy.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

The number of the moles are there in 47.2 grams of NaCl is 0.807 mol. The molar mass of the NaCl is 58.441 g/mol.

The mass of the NaCl is 47.2 g

The molar mass of the NaCl is 58.441 g/mol

The number of the moles = mass / molar mass

where,

The mass = 47.2 g

The molar mass of the NaCl = 58.441 g/mol

The number of the moles of the NaCl = 47.2 g / 58.441 g/mol

The number of the moles of the NaCl = 0.807 mol

Thus, the number of the mole of the NaCl is 0.807 mol.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

The correct answer is B, 2,8-dimethylnonane. It is the structural isomer of 3-ethyl-3-methylhexane.

Structural isomers, also known as constitutional isomers, are molecules with the same molecular formula but different arrangements of atoms in the molecule. They have a different structural formula and therefore different physical and chemical properties. The physical and chemical properties of structural isomers can be significantly different due to differences in their molecular structure.

Physical properties, such as boiling point, melting point, and solubility, can vary due to differences in intermolecular forces, such as dipole-dipole interactions and hydrogen bonding.

Chemical properties, such as reactivity and reactivity towards specific reagents, can also be different due to differences in the arrangement of functional groups and the orientation of bonds in the molecule. For example, different structural isomers can have different boiling points, reactivity towards certain reagents, and melting points.

To know more about hydrogen bonding, visit:

https://brainly.com/question/15099999

#SPJ4

According to the question, 3,3-diethyloctane is a structural isomer of 3-ethyl-3-methylhexane.

What are structural isomers?

Structural isomers, also known as constitutional isomers, are molecules with the same molecular formula but different arrangements of atoms in the molecule. They have a different structural formula and therefore different physical and chemical properties. The physical and chemical properties of structural isomers can be significantly different due to differences in their molecular structure.

Structural isomers are compounds with the same molecular formula but different structural formulas. In this case, 3-ethyl-3-methylhexane has the molecular formula C8H18, while 3,3-diethyloctane has the same molecular formula of C8H18, but the atoms are arranged differently.

To know more about structural isomers

https://brainly.com/question/3947075

#SPJ4

Answer: The activation energy increases.

Explanation:

The rate of a biochemical reaction decreases at high temperatures because the The activation energy increases.

False. The leveling effect refers to the tendency of strong acids to behave as weaker acids in highly polar solvents, such as water.

This effect is caused by the solvation of the proton in the solvent, which reduces its acidity. In the case of sulfuric acid, this effect can prevent the use of sulfuric acid as an acid in some cases, as it may not exhibit its full strength in highly polar solvents. However, it is still commonly used as an industrial strong acid due to its strong acidity and low cost. The leveling effect is a phenomenon observed in Nucleophilic Aromatic Substitution (S N Ar) reactions. It refers to the reduction in the reactivity of a strong electrophile, such as a strong acid, in highly polar solvents. The highly polar solvent can solvate the electrophile, reducing its acidity and reactivity.

In the case of sulfuric acid, the leveling effect can cause it to behave as a weaker acid in highly polar solvents, reducing its ability to function as a strong acid in some cases. However, despite the leveling effect, sulfuric acid is still widely used as an industrial strong acid due to its strong acidity, low cost, and versatility. In less polar solvents, the leveling effect is reduced, and sulfuric acid can exhibit its full strength as a strong acid.

To learn more about strong acids please click on below link.

https://brainly.com/question/12811944

#SPJ4

Answer:

CO2 + M --> CO + MO2, where M is the solid compound.

Explanation:

The number of electrons in the Pb²⁺ is 80 electrons. The atomic number of the Pb is 82.

The atomic number of the 82. The electronic configuration of the Pb is as follows :

The electronic configuration of Pb = 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 4f¹⁴ 5s² 5p⁶ 5d¹⁰ 6s² 6p²

The Pb²⁺ means , it looses the two electrons and forms the cation.

The electronic configuration of the  Pb²⁺ :

1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 4f¹⁴ 5s² 5p⁶ 5d¹⁰ 6s²

Thus there are 80 electrons in the Pb²⁺ ion as it looses the two electrons.

To learn more about electrons here

https://brainly.com/question/12571047

#SPJ4