Answer:
Cooling a substance causes molecules to slow down and get slightly closer together, occupying a smaller volume that results in an increase in density. Hot water is less dense and will float on room-temperature water. Cold water is dense and will sink in room-temperature water.
Explanation:
A single square from the periodic table is shown. It describes the element niobium.
This information can be used to determine that all niobium atoms have 41 -
A single square from the periodic table is shown. It describes the element niobium.
This information can be used to determine that all niobium atoms have 41 -
Energy Levels
Neutrons
Valence Electrons
Protons
Total Mass
A single square from the periodic table is shown. It describes the element niobium. This information can be used to determine that all niobium atoms have 41 -Protons
What is the periodic table?The periodic table, also known as the periodic table of the elements, is described as a rows and columns arrangement of the chemical elements.
The square from the periodic table that describes niobium includes its atomic number, which is 41.The other information provided in the square, like as the atomic mass, electron configuration, and chemical symbol, can also be determined from the element's position in the periodic table.
Learn more about periodic table at: https://brainly.com/question/1173237
#SPJ1
Balance the following reactions NH3+O2 NO+H2O
The balanced chemical reaction is 2NH3(g) + 5/2 O2 (g) → 2NO (g) + 3H2O (l). A reaction can be balanced by making the atoms equal on both sides of the reaction.
A chemical reaction is said to be a balanced chemical reaction if it have the same number and type of each atom on both sides of the equation. The coefficients in a balanced reaction must be the simplest whole number ratio. Mass is always conserved in a chemical reactions. The chemical reaction is a process in which one or more substances are changed into one or more new substances. In the balanced reaction the atoms in the reactant and the product are equal. Reactants are the starting materials in a reaction. Products are the materials present at the end of a reaction.
To learn more about Balanced chemical reaction please visit:
https://brainly.com/question/23877810
#SPJ4
why compound be broken down into simpler substances
A compound can be broken down into simpler substances because it is made up of two or more different elements that are chemically combined together. When a compound is broken down, it results in the formation of new substances that have different properties than the original compound.
Compounds are formed through a chemical reaction between different elements, and the resulting substance is held together by chemical bonds. These bonds can be broken through various processes such as heating, electrolysis, or chemical reactions. Once the bonds are broken, the individual elements that make up the compound are released and can be isolated.
The ability to break down compounds into simpler substances is an important aspect of chemistry, as it allows scientists to study the properties and behavior of individual elements. It also plays a crucial role in industries such as pharmaceuticals and agriculture, where compounds are broken down to extract useful substances. Understanding the composition and behavior of compounds is fundamental to advancing our knowledge of the natural world and improving our quality of life.
Learn more about compound
brainly.com/question/19831841
#SPJ4
The complete question is-
Are the properties of two proteins with the same type and number of amino acids but a different order of linkage the same?
Hydrochloric acid is usually purchased in a concentrated form that is 37. 0% hcl by mass and has a density of 1. 20 g/ml.
You would need to take 1864 mL of concentrated hydrochloric acid to prepare 2.80 L of 0.540 M HCl.
To calculate the amount of concentrated hydrochloric acid required, we need to find the number of moles of hydrochloric acid in the final solution and then work backwards to find the amount of concentrated solution required.
The number of moles of hydrochloric acid in the final solution can be calculated as follows:
2.80 L x 0.540 M = 1.50 moles.We know that the concentrated hydrochloric acid is 37.0% HCl by mass and has a density of 1.20 g/mL, so we can calculate the number of moles of HCl in one milliliter of the concentrated solution as follows:
1.20 g/mL x (37.0 g HCl / 100 g solution) = 0.444 g HCl = 0.0124 moles HCl/mL.Therefore, to obtain 1.50 moles of HCl, we would need 1.50 moles / 0.0124 moles/mL = 121 mL of the concentrated solution. However, we want to prepare 2.80 L of the final solution, so we would need
121 mL x (2.80 L / 0.121 L) = 1864 mL of the concentrated solution.Learn more about Hydrochloric Acid:
https://brainly.com/question/3229358
#SPJ4
Complete Question:
Hydrochloric acid is usually purchased in a concentrated form that is 37.0% HCl by mass and has a density of 1.20 g/mL. How much concentrated solution would you take to prepare 2.80 L of 0.540 M HCl by mixing with water?
Each different signal in a 1H NMR spectrum represents a different__________of hydrogen atom. Hydrogen atoms that are_______________give the same signal.
The various signals in a 1H NMR spectrum correspond to various hydrogen atom types. Equivalent hydrogen atoms produce the same signal.
What signals represent in a 1H NMR spectrum?The 1H NMR spectrum has three signals in total. 1,3-dimethylbenzene: The two protons in Hc and Hd are each one carbon away from a methyl group, while Hb is located between two methyl groups. The four aromatic protons can therefore be separated into three sets. It is comparable to have two methyl groups.
So, when a 1H NMR experiment is run, the spectrum will only contain one signal that represents all four hydrogens at a single chemical shift. [Here is the NMR spectra]
In terms of NMR, all three Ha protons and all three Hb protons are chemically equal to one another. The Ha and Hb protons are not chemically identical, though. Because of this, the Ha protons' resonance frequency differs from the Hb protons'.
To learn more about 1H NMR spectrum refer to;
https://brainly.com/question/30544771
#SPJ4
Select the appropriate pipette to use for each of the following volumes. a. 874 µLb. 57 µL c. 340 µL d. 15 µL
The pipette we can use for 874µL is A P1000 and for 57µL is A P20 and for 340µL is A P200 and for 15µL is A P10 .
To select the appropriate pipette, we need to choose one with a volume range that encompasses the desired volume, but also one that is precise enough for the required application. Here are some options:
a. 874 µL: A P1000 pipette would be appropriate, as it has a volume range of 100-1000 µL and can deliver volumes up to 1 mL with high precision.
b. 57 µL: A P20 pipette would be appropriate, as it has a volume range of 2-20 µL and can deliver volumes up to 20 µL with high precision.
c. 340 µL: A P200 pipette would be appropriate, as it has a volume range of 20-200 µL and can deliver volumes up to 200 µL with high precision.
d. 15 µL: A P10 pipette would be appropriate, as it has a volume range of 0.5-10 µL and can deliver volumes up to 10 µL with high precision.
Learn more about pipette here:
https://brainly.com/question/13719419
#SPJ4
where we can find the unique identification code for each chemical
The amount of the dangerous chemical that is present in the product should not be listed on the MSDS.
What are OSHA's requirements for chemical container labeling?For hazardous substances used at work, MSDSs must be created, and they must include a list of all hazardous substances that are present in a product in concentrations of 1% or higher, or 0.1% or higher if the substance is carcinogenic. The amount of the dangerous chemical that is present in the product should not be listed on the MSDS.
A Material Safety Data Sheet (MSDS) is a document that details how to work safely with a chemical product as well as any potential hazards (health, fire, reactivity, and environmental). It serves as a crucial foundation for the creation of a comprehensive health and safety program.
Under its Hazard Communication Standard, OSHA has modified the standards for identifying dangerous chemicals (HCS). Pictograms, a signal word, warning and cautionary language, the product identifier, and supplier information must all be present on labels.
The complete question is:
Pre lab: Where we can find the unique identification code for each chemical
To learn more about unique identification code refer to;
https://brainly.com/question/13479789
#SPJ4
What is HCF of 24 and 36?
Answer: 12
Explanation: the hcf of 24 and 36 is 12 because the common multiples they both have are 2*2*3 which is equal to 12
What term describes the lowest temperature to which air can be cooled at constant pressure before saturation occurs?
The minimum temperature that air must be chilled to in order to reach saturation at or below 0°C (32°F).
Is the temperature to which air must be cooled at constant pressure to reach saturation?The dew point is the temperature that must be reached while maintaining pressure for the air to become saturated, or for the relative humidity to reach 100%.
Simply said, the boiling point is also known as the saturation temperature. The term "saturation" refers to the temperature that a liquid must reach in order to boil and transition into the vapour phase based on its saturation pressure.
Intensity and chroma are other names for saturation. It speaks to the color's predominant hue. The "pure" hues are found at the outermost portion of the hue wheel. The hue we are using to describe the colour predominates less and less as you travel towards the centre of the wheel.
To learn more about saturation refer to:
https://brainly.com/question/601501
#SPJ4
Explain why acetic acid, HC₂H3O2, is defined as an acid and describe both conceptually and using a
chemical equation what happens when HC₂H3O2, a weak acid, reacts with sodium hydroxide, NaOH, a
strong base.
draw helium lewis dot structure
The helium Lewis dot structure is as follows :
He :
The helium is denoted by the symbol He. The Helium, belongs to the the noble gases in the Group 8, it has the only two valence electrons in its valence shell and the first orbit will have the only those two electrons. The electrons are will be represented as the two lone pair with the dots in the Lewis symbol. The lewis structure of the helium is as follows :
He :
In the lewis or the electron dot structures, the number of the valence electrons for the element is represented by the dots. In the periodic table, the valence electrons will have the highest level of the energy.
To learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
english teacher of the 1700s who stated that matter is made of atoms that cannot be divided and that atoms combine in specific ratios.
true/false
Answer: False
Explanation: Flase Old John Dalton (1776-1894)
I hope this is helpful I know it is not much but this is a false answer
What process is involved in freezing?
The process of transformation of any liquid substance into a solid is comprehended as freezing. The temperature below which any material advents transforming its phase to solid from the liquid is understood as that material's freezing point.
Freezing is that process that begins taking place when the temperature is lowered down enough. Due to the decreased temperature, the transition occurs at the molecular level as the molecule's rate turns on decreasing. Due to the substantial slow down the molecules become incapable to confound the attractive forces among them. As an effect, the configuration of molecules along the specified positions takes place and directs to the phenomenon of freezing.
To learn more about the phases of transition visit here:
https://brainly.com/question/29795678
#SPJ4
16) SEP Ask Questions The process of evaporation has a different outcome in an open
system versus a closed system. What happens to the water level in a closed water
bottle compared to an open water bottle if you set them both out in the sun?
Notebook
I U
B
The water level remains unchanged because the molecules of water vapor cannot diffuse into the surroundings.
Describe the evaporation.In order for a liquid to become a gas, evaporation must occur. When raindrops "disappear" on a hot day or when wet clothing dries in the sun, it is simple to picture this phenomenon. In these instances, the liquid water is actually evaporating into a gas known as water vapor rather than truly dissipating.
Evaporation explained to childrenWhen a liquid turns into a gas, it has evaporated. To form a gas known as water vapor, liquid water evaporation occurs. Water evaporation and atmospheric re-entry are made possible by the sun's heat. It then creates a cloud and returns to being liquid water.
To know more about Evaporation visit:
https://brainly.com/question/5019199
#SPJ1
1) Predict the products of a chemical reaction.
a) Use your knowledge of atoms, bonding, and the periodic table to complete the chemical equation and predict the products of the chemical reaction on your paper.
Label this equation “Initial Prediction.” CH4 + O2 becomes ___________________
2) Write a few paragraphs predicting the products of the chemical reaction and explaining why you made this prediction. Your document should:
The products of the chemical reaction given are carbon dioxide and water.
The prediction was made based on the fact that the reaction of hydrocarbons with oxygen is a combustion reaction that produces carbon dioxide and water.
What is a combustion reaction?Burning, also known as combustion, is a high-temperature exothermic redox chemical reaction that occurs when an oxidant, typically atmospheric oxygen, interacts with a fuel to generate oxidized, frequently gaseous products in a mixture known as smoke that includes carbon dioxide.
The equation of the reaction of CH₄ and O₂ is given below:
CH₄ + O₂ ----> CO₂+ H₂O
Learn more about combustion reactions at: https://brainly.com/question/12172040
#SPJ1
True or false : an electron donor provides the potential energy required to produce atp
False. The flow of protons back into the mitochondrial matrix through ATP synthase is exergonic and provides the energy for ATP synthesis.
False. An electron donor provides the electrons required for the electron transport chain (ETC), which ultimately generates a proton gradient that drives the synthesis of ATP. The potential energy required to produce ATP comes from the proton gradient itself, not from the electron donor.
During cellular respiration, the ETC uses electrons from electron donors such as NADH and FADH2 to pump protons (H+) across the inner mitochondrial membrane. This generates a gradient of protons with a higher concentration of protons outside the mitochondrial matrix than inside. The energy stored in this gradient is used by ATP synthase to synthesize ATP from ADP and inorganic phosphate. The flow of protons back into the mitochondrial matrix through ATP synthase is exergonic and provides the energy for ATP synthesis. Therefore, it is the proton gradient, not the electron donor, that provides the potential energy required to produce ATP.
Learn more about ATP synthesis here https://brainly.com/question/30051393
#SPJ4
Why is SF6 a nonpolar molecule?
[tex]SF_{6}[/tex] is non polar due to symmetrical placement of all the fluorine around the central sulfur atom.
SF6 is a covalent molecule with a central sulfur atom. Sulfur on its own contains 6 valence electrons as a main group 6A element. This will share all 6 valence electrons through 6 single covalent bonds to the 6 peripheral fluorine atoms. So the central sulfur atom has zero non-bonding pairs. These bonds are sometime polar due to the central and peripheral atoms having different electronegativity values. The polar molecule contains a certain geometry that does not cancel out these polar bond vectors. Due to its geometry sulfur hexafluoride is non polar. The arrangement of this is at perpendicular (90˚) angles ensures that the pull for electrons by fluorines on one side is balanced by fluorines pulling on the other side.
To learn more about Non polar molecule please visit:
https://brainly.com/question/1426521
#SPJ4
suppose you heat a 4.31 g sample of a n a 2 c o 3 hydrate. after thorough heating, the mass of the compound is 3.22 g. based on the data, what is the formula for the hydrate you started with?
The Na2CO3 . 2H2O is the formula for the hydrate you started with the compounds.
What is mole ?
A mole is the atom's elementary particle, an ion. The mole of the substance is always related to the Avogadro number. The mole is always associated with the weight or mass of the element or substance. The standard unit of a mole is mol. The mole is a significant factor of the reactant and products to form an equation. A mole calculates the atom, ion, and substance weighs.
What is compound ?
A compound combines one or more additional substances to form a new product. The combination of two substances or elements is equal to the mass ratio for making that product. It is attached firmly, and they have equal in all ways to form a combination. The elements both are bonded together. Each compound has its chemical structure; if it breaks, it can either split into two atoms or molecules or in a single. Different types of compounds are present.
Moles of compound (anhydrate Na2CO3)
= mass / molar mass
= 3.22 g / 105.98 g mol-1 = 0.0304 mol
Mass of water = Mass of hydrated Na2CO3 - mass of anhydrate Na2CO3
= 4.31 g - 3.22 g = 1.09 g
Thus,
Moles of water = mass / molar mass
= 1.09 g / 18.015 g mol-1 = 0.0605 mol
Therefore,
Molecular ratio (n) is calculated by moles of components divided by minimum number of moles.
Hence,
n (Na2CO3) = 0.0304 / 0.0304 = 1
n (H2O) = 0.0605 / 0.0304 = 1.99 = 2
Thus, 2 moles of water is present in 1 mol of Na2CO3.
Hence, formula for hydrate = Na2CO3 . 2H2O
Therefore, Na2CO3 . 2H2O is the formula for the hydrate you started with the compounds.
Learn more about moles from the given link.
https://brainly.com/question/29367909
#SPJ1
How many neutrons and electrons are in potassium?
Potassium-39 has 19 electrons, 19 protons, and 20 neutrons.
Potassium (K) has 19 protons since its atomic number is 19, which means it also has 19 electrons in its neutral state because the number of protons equals the number of electrons in a neutral atom.
The number of neutrons in potassium can be calculated by subtracting the atomic number (number of protons) from the mass number (number of protons + neutrons). The most abundant isotope of potassium is 39K, which has a mass number of 39. Therefore, the number of neutrons in potassium-39 is:
Number of neutrons = Mass number - Atomic number
Number of neutrons = 39 - 19
Number of neutrons = 20
It's worth noting that potassium has other isotopes with different numbers of neutrons, but the most abundant isotope is 39K.
To know more about electrons here
https://brainly.com/question/1255220
#SPJ4
________ is used to display the contents of a cell on multiple lines.A. The Wrap Text command
B. The active worksheet tab displays in red font.
C. Vertical dotted line between columns
D. Vertical or horizontal bars
A. The Wrap Text command is used to display the contents of a cell on multiple lines.
What is the Wrap Text command?The Wrap Text command is a feature in Microsoft Excel that allows the contents of a cell to be displayed on multiple lines within the cell.
While entering text into an Excel cell, by default, the text will overflow into adjacent cells if it's longer than the width of the cell. However, the Wrap Text command allows to display the full text within the cell by automatically adjusting the row height to accommodate multiple lines of text.
To apply the Wrap Text command in Excel, select the cell or range of cells that has to be formatted, right-click on them, and choose Format Cells. In the Format Cells dialog box, go to the Alignment tab and select the Wrap Text checkbox. You can also access this option through the Home tab on the ribbon by clicking on the Wrap Text button.
Once applied the Wrap Text command to a cell, any text that exceeds the width of the cell will automatically wrap to the next line within the same cell. Adjust the row height manually by dragging the bottom border of the row to make all the wrapped text visible. If want to remove the text wrapping, simply uncheck the Wrap Text option.
To know more about The Wrap Text command, visit:
https://brainly.com/question/29891251
#SPJ1
Calculate the molecular mass of Ammonium chloride nh4cl
The molecular mass of a Ammonium chloride molecule, NH₄Cl is equals to the 53.5 g/mol.
We have a Ammonium chloride molecule, NH₄Cl. It consists one atom of nitrogen, one atom of chlorine and four atoms of hydrogen. Molecular mass of a molecule is the sum of the masses of the individual atoms within the quantities present in a molecule. So, the molecular mass of NH₄Cl, is sum of individual masses of hydrogen, nitrogen and chlorine atoms with number of their atoms. The atomic mass of chlorine atom, Cl = 35.5 g/mol
The atomic mass of hydrogen atom, H = 39.098 g/mol
The atomic mass of nitrogen atom, N
= 14 g/mol
Now, Molecular mass of NH₄Cl = 1× atomic mass of Nitrogen + 1×atomic mass of chlorine + 4× atomic mass of hydrogen atom
= 1×N + 1×Cl + 4×H
= 1× g/mol + 1×14 g/mol + 4×1 g/mol
= 35.5 g/mol + 14 g/mol + 4 g/mol
= 53.5 g/mol
Hence, the molecular mass of NH₄Cl is 53.5 g/mol.
For more information about Molecular mass, visit :
https://brainly.com/question/24191825
#SPJ4
which group has the lowest ionization energy values?
Alkali metals has the lowest ionization energy values.Ioinization energy may be negative or positive.
In physical science and science, ionization energy (IE) (American English spelling), ionization energy (English spelling) is the base energy expected to eliminate the most approximately bound electron of a secluded vaporous iota, positive particle, or molecule.[1] The main ionization energy is quantitatively communicated as
X(g) + energy ⟶ X(g)⁺ + e−
Group 1 of the Periodic Table highlights metals whose valence electron Independently involves the peripheral shell, the valence shell of the given iotas. Since the nuclear charge is essentially reduced of regard to the valence shell, the alkali metals show the least ionization energies, and these energies (sensibly) decline down the Gathering.
To know more about ionization energy,visit here:
https://brainly.com/question/28385102
#SPJ4
what is ca 540 instructions?
The CA 540 instruction is to make the adjustments to the federal adjusted gross income and to the federal itemized deductions by using the California law.
The CA (540), is the California Adjustments – The Residents, to make the adjustments to the federal adjusted gross income and to the federal itemized deductions by using the California law. The CA 540 is the California Resident Income Tax Return.
It is equal to total income we report that's the subject to the income tax, such as the earnings from the job, the self-employment, the dividends and the interest from the bank account - minus the specific deductions, the adjustments that we are eligible to take.
To learn more about law here
https://brainly.com/question/30390837
#SPJ4
A shielded nucleus will absorb ____ from a deshielded nucleus and will have a _____ chemical shift.upfield; lowerdeshielded, high sheildedenvironment, shiftagainst, with
A shielded nucleus will absorb uplift from a deshielded nucleus and will have a lower chemical shift.
Generally, in nuclear magnetic resonance (NMR) spectroscopy, the chemical shift is defined as a measure of the resonance frequency of a nucleus relative to a reference compound. The chemical shift usually depends upon the electronic environment of the nucleus, which is affected by nearby atoms or groups of atoms.
Basically, when a nucleus is shielded, it means that there are electrons or electron-donating groups nearby which reduces the external magnetic field experienced by the nucleus. And this results in a lower resonance frequency or higher chemical shift due to the reason that nucleus requires less energy to achieve resonance.
Learn more about NMR spectroscopy from the link given below.
https://brainly.com/question/17355874
#SPJ4
How to Draw the Lewis Structure for SeF4
The lewis structure of the SeF₄ is as follows :
..
|
..
: F :
: F : - Se : - : F :
°° | °°
: F :
°°
The total valence electrons in the SeF₄ is the 34 electrons. The molecular structure of the SeF₄ is the trigonal bipyramidal. The Selenium that is Se is the least electronegative atom than the fluorine atom and therefore in the center of the structure.
In SeF₄ Lewis structure with the Selenium which can hold the more than 8 valence electrons and there are the seven Fluorine atoms with the F.
To learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
what are the two main factors that determine the outcome of a chemical reaction in a living cell?
The two main factors that determine the outcome of a chemical reaction in a living cell are direction and rate.
Chemical reactions are absolutely necessary for the production of energy, also known as ATP, in our cells. Energy is essential to the survival of all living things, and ATP is the reactant that fuels the majority of the chemical reactions that take place inside of cells. The production of usable energy by cells is referred to as cellular respiration.
Biochemical reactions are another name for chemical reactions that take place inside of living things. The term "metabolism" refers to the whole of all the biochemical events that take place within an organism. Both exothermic (result in the release of heat) and endothermic (result in the absorption of heat) chemical reactions are involved in the metabolic process.
To learn more about chemical reaction, click here:
https://brainly.com/question/11470635
#SPJ4
Chemical bonds hold together the atoms that make up a molecule. Molecules may also be attached to one another by chemical bonds. The figure shows how hydrogen bonds attach water molecules to other water molecules.Drag the terms on the left to the appropriate blanks on the right to complete the sentences.1. A water molecule consists of one oxygen atom joined to each of two hydrogen atoms by a(n) __________, a type of bond in which the electrons do not spend equal time with the two atoms involved.2. Because oxygen is more electronegative than hydrogen, the electrons in a water molecule spend more time closer to ___________.3. The unequal distribution of electrons means that each of the three atoms in a water molecule has a __________. This makes water a polar molecule.4. The oxygen of a water molecule has a partial ________ charge.5. Each hydrogen in a water molecule has a partial __________ charge.6. A weak bond called a(n) ___________ forms as a result of the attraction between the slightly positive hydrogen of one water molecule and the slightly negative oxygen of a nearby water molecule.
The atoms that comprise a molecule are held together by chemical bonds. Chemical bonds can also hold molecules to one another. Water molecules are joined to one another by hydrogen bonds.
What exactly is a chemical bond?
The atoms or ions that come together to create a molecule or the molecules that combine to make a substance are held together by a force of attraction. It is in charge of keeping the individual atoms or molecules together. The energy is released when chemical bonds are formed. Chemical bonds bind substances together. Chemical bonds that hold molecules together also form temporary connections vital for life.
Ionic, covalent, hydrogen, and London dispersion forces are examples of chemical bonding.
To know more about Chemical bonds visit:-
https://brainly.com/question/819068
#SPJ1
Elements of the same group have similar valance shell electronic configuration. Hence they exhibit similar________.
Elements of the same group have similar valance shell electronic configurations. Hence they exhibit similar Chemical Properties.
Elements of the same group in the periodic table have the same number of valence electrons, which are located in the outermost electron shell. As a result, these elements have similar valence shell electron configurations, which determine their chemical properties and reactivity. This is why elements of the same group exhibit similar chemical behavior, including reactivity towards other elements and the tendency to form similar types of chemical bonds.
Learn more about shell electronics:
https://brainly.com/question/28727396
#SPJ4
Calculate how many milliliters of 1 M NaOH will be needed to make 1 L of 0.1 M solution.
Calculate how many grams of potassium acid phthalate (KHP, FW = 204.2 g/mol) will react with about 25 ml of the 0.1 M NaOH solution. The reaction is as follows:
HKC8H4O4 + NaOH â H2O + NaKC8H4O4
Calculate how many mL of 1 M HCl is needed to make 1 L of 0.2 M HCl.
HCl + NaOH â H2O + NaCl
The amount of moles of NaOH would be 0.0025 mol.
How to estimate the moles of NaOH?To estimate how much of a solution exists needed to create a diluted solution with a desired volume the equation [tex]$M_1 V_1=M_2 V_2$[/tex] can be utilized, where M exists molarity, V exists volume, and 1 and 2 denote the initial and diluted solution.
[tex]$$\begin{aligned}& V_1=\frac{M_2 V_2}{M_1} \\& V_1=\frac{(0.1)(1)}{1}=0.1 \mathrm{~L}\end{aligned}$$[/tex]
Therefore, the solution will require 0.1 L or 100 mL.
The amount of moles of NaOH is [tex]$n=0.1 \times 0.025=0.0025 \mathrm{~mol}$[/tex].
Since the reaction between KHP and NaOH exists 1 : 0.0025 mol of KHP will be required. This corresponds to a mass of [tex]$m=204.2 \times 0.0025=0.51 \mathrm{~g}$[/tex]
The equation [tex]$M_1 V_1=M_2 V_2$[/tex] can be utilized.
[tex]$$\begin{aligned}& V_1=\frac{M_2 V_2}{M_1} \\& V_1=\frac{(0.2)(1)}{1}=0.2 L \text { or } 200 \mathrm{~mL}\end{aligned}$$[/tex].
Therefore, the correct answer be 0.2 L or 200 mL.
To learn more about moles refer to:
https://brainly.com/question/24191825
#SPJ4
What experimental criterion is to be used to measure the rates of bromination of the hydrocarbons used in this experiment?
1.Precipitation
2.Gas evolution
3.Color change
4.Temperature change
The experimental criterion is to be used to measure the rates of bromination of the hydrocarbons in this experiment is "color change". Option 3 is correct.
Bromination of hydrocarbons involves adding bromine to the hydrocarbon, which results in a color change. Bromine is a reddish-brown liquid, and when it reacts with a hydrocarbon, the color of the mixture fades as the bromine is consumed. The rate of bromination can be determined by measuring the color change over time.
In this experiment, the hydrocarbons can be mixed with a solution of bromine in an organic solvent such as chloroform, and the reaction can be monitored by measuring the color change using a spectrophotometer or by visual observation. The rate of reaction can be determined by measuring the time taken for the color to fade, or by measuring the decrease in absorbance of the bromine solution over time.
To know more about bromination here
https://brainly.com/question/28938775
#SPJ4