Click Stop Using the slider set the following: coeff of restitution to 1.00 A velocity (m/s) to 6.0 A mass (kg) to 6.0 B velocity (m/s) to 0.0 Calculate what range can the mass of B be to cause mass A to bounce off after the collision. Calculate what range can the mass of B be to cause mass A to continue forward after the collision. Check your calculations with the simulation. What are the ranges of B mass (kg)

Answer:

Acosθ

Explanation:

The x-component of a vector is defined as :

Magnitude * cosine of the angle

Maginitude * cosθ

The magnitude is represented as A

Hence, horizontal, x - component of the vector is :

Acosθ

Furthermore,

The y-component is taken as the sin of the of the angle multiplied by the magnitude

Vertical, y component : Asinθ

Answer:

  v = 2.75 10⁴ m / s

Explanation:

For this exercise we must use Kepler's third law which is an application of Newton's second law to the solar system

            F = ma

where force is the force of gravity

            F = [tex]G \frac{m M}{r^2}[/tex]

acceleration is centripetal

             a = [tex]\frac{v^2}{r}[/tex]

we substitute

           G m M / r² = m v² / r

           [tex]\frac{GM}{r}[/tex] = v²

           v = [tex]\sqrt{GM/r}[/tex]

indicate that the radius of the orbit is r = 1.17 AU, let's reduce to the SI system

            r = 1.17 AU (1.496 10¹¹ m / 1 AI) = 1.76 10¹¹ m

let's calculate

         v = [tex]\sqrt{\frac{6.67 \ 10^{-11} 1.991 \ 10^{30} }{ 1.76 \ 10^{11}} }[/tex]Ra (6.67 10-11 1.991 10 30 / 1.76 10 11

         v = [tex]\sqrt{7.5454 \ 10^8 }[/tex]ra 7.5454 10 8

         v = 2.75 10⁴ m / s

Answer:

 E = 2,964 10⁻¹⁹ J

Explanation:

The energy of the photons is given by the Planck relation

          E = h f

the speed of light is related to wavelength and frequency

          c = λ f

we substitute

          E = h c /λ

let's reduce the magnitude to the SI system

          λ = 671 nm = 671 10⁻⁹ m

let's calculate

          E = 6.63 10⁻³⁴ 3 10⁸ /671 10⁻⁹

          E = 2,964 10⁻¹⁹ J

Answer:

I could not find the answer or do it myself if I did find it I would defenetly share

Answer:

Normal force exerted on the rover would be greater at a point on the surface of the planet where the weight of the rover is experienced to be greater.

Explanation:

Since weight is a vector quantity, it can vary with position. Weight is the amount of force the planet exerts on the rover centered towards the planet.

Such a force is the result of gravitational pull and is quantified as:

[tex]F=G\times \frac{M.m}{R^2}[/tex]

and [tex]M=\rho\times \frac{4\pi.r^3}{3}[/tex]

where:

R = distance between the center of mass of the two bodies (here planet & rover)

G = universal gravitational constant

M = mass of the planet

m = mass of the rover

This gravitational pull varies from place to place on the planet because the planet may not be perfectly spherical so the distance R varies from place to place and also the density of the planet may not be uniform hence there is variation in weight.

Weight is basically a force that a mass on the surface of the planet experiences.

According to Newton's third law the there is an equal and opposite reaction force on the body (here rover) which is the normal force.

Answer:

6m/s

Explanation:

We are to calculate the speed of Monique

Speed = Distance/Time

Given

Distance = 360m

Time = 60secs

Substitute

Speed = 360m/60s

Soeed = 6m/s

Hence she was running at 6m/s

Answer:

c

Explanation:

darker colors absorb app light

Answer:

C. Is absorbing all wavelengths of light.

Explanation:

Black isn't a color, but rather the absence of color. We see a T-shirt as black because it isn't reflecting any light toward our eyes. A black T-shirt absorbs all of the wavelengths of light, causing it to absorb more energy and become warmer than white, which reflects light.

Answer:

Explanation:

a)

Below  the worker , the tension in cable  is pulling  the crate . Let the tension be T₁ .

weight of  crate is acting downwards .

Total weight  1510  N.

Net force acting on both = T₁ - 1510

Applying second law of Newton ,

T₁ - 1510 = 1510 / 9.8 x 0.62                [ 1510 / 9.8 = mass of  crate ]

T₁ - 1510 = 95.5

T₁  = 1605.5  N.

b )

Above the worker , the tension in cable  is pulling both the worker and the crate . Let the tension be T₂ .

weight of both worker and crate is acting downwards .

Total weight = 965 + 1510 = 2475 N.

Net force acting on both = T₂ - 2475

Applying second law of Newton ,

T₂ - 2475 = 2475 / 9.8 x 0.62  [ 2475 / 9.8 = mass of both worker and crate ]

T₂ - 2475 = 156.6

T₂  = 2631.6 N.

Answer:

[tex]\frac{a_{c1}}{a_{c2}} = 2.23[/tex]

Explanation:

The centripetal acceleration is given as follows:

[tex]a_c = \frac{v^2}{r}\\[/tex]

where,

ac = centripetal acceleration

v = linear speed = rω

r = radius

ω = angular speed

Therefore,

[tex]a_c = \frac{(r\omega)^2}{r}\\\\a_c = r\omega^2[/tex]

Therefore, the ratio will be:

[tex]\frac{a_{c1}}{a_{c2}} = \frac{r_1\omega^2}{r_2\omega^2}\\\\\frac{a_{c1}}{a_{c2}} = \frac{r_1}{r_2}\\\\[/tex]

where,

r₁ = 6.7 m

r₂ = 3 m

Therefore,

[tex]\frac{a_{c1}}{a_{c2}} = \frac{6.7\ m}{3\ m}\\\\[/tex]

[tex]\frac{a_{c1}}{a_{c2}} = 2.23[/tex]

Explanation:

The period T of a simple pendulum is given by

[tex]T = 2 \pi \sqrt{\dfrac{l}{g}}[/tex]

Doubling the length of the pendulum gives us a new period T'

[tex]T' = 2 \pi \sqrt{\dfrac{l'}{g}} = 2 \pi \sqrt{\dfrac{2l}{g}}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{2} \left(2 \pi \sqrt{\dfrac{l}{g}} \right)[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{2}\:T = \sqrt{2}(3.5\:\text{s})= 4.95\:\text{s}[/tex]

Answer:

Explanation:

Answer:

The fundamental unit of force is kg.m/s²

Explanation:

According to Newton's second law of motion, force is given as the product of mass and acceleration.

Mathematically, force can be expressed as; F = ma

where;

F is the force

M is mass of the object, unit of mass = kg

a is acceleration of the object, unit of acceleration = m/s²

Force = kg x m/s²

Force = kg.m/s²  = Newton [N]

Therefore, the fundamental unit of force is kg.m/s²

Answer:

B. Smaller than

Explanation:

This question is from the Doppler effect. As the object which is in motion goes off from the other, there's a reduction in the frequency. This is due to the fact that successive soundwave get to be longer. So that the pitch will then be lowered. When the person observing moves towards what is making the sound, each soundwave that follows gets faster than the previous.

Answer:

Magnesium Chloride: MgCl2

Sodium Sulfate: Na2SO4

Answer:

the SI unit (meter per second square) indicates a linear type of motion.

Explanation:

Given;

acceleration of the car, a = 5.2 m/s² North

the SI unit of the car, = m/s²

The SI unit of the given value (acceleration), indicates a linear type of motion.

Linear acceleration is the change in linear velocity with time. Also, the northwards direction indicates linear displacement of the car.

Therefore, the SI unit (meter per second square) indicates a linear type of motion.

Answer:

displacement

Explanation:

Explanation:

Given

Acceleration of the pebble is

At t=0, velocity is

considering horizontal motion

[tex]\Rightarrow x=ut+0.5at^2 \\\Rightarrow 11=4.3t+0.5(4.6)t^2\\\Rightarrow 2.3t^2+4.3t-11=0\\\Rightarrow (t-1.4435)(t+3.3131)=0\\\Rightarrow t=1.44\ s\quad [\text{Neglecting negative time}]\\[/tex]

Velocity acquired during this time

[tex]\Rightarrow v_x=4.3+4.6\times 1.44\\\Rightarrow v_x=4.3+6.624\\\Rightarrow v_x=10.92\ s[/tex]

Consider vertical motion

[tex]\Rightarrow v_y=0+7(1.44)\\\Rightarrow v_y=10.08\ m/s[/tex]

Net velocity is

[tex]\Rightarrow v=\sqrt{10.92^2+10.08^2}\\\Rightarrow v=\sqrt{220.85}\\\Rightarrow v=14.86\ m/s[/tex]

Angle made is

[tex]\Rightarrow \tan \theta =\dfrac{10.08}{10.92}\\\\\Rightarrow \tan \theta =0.92307\\\\\Rightarrow \theta =42.7^{\circ}[/tex]

Answer:

Distance between them after 5 hours is 300 km.

Explanation:

From point A a vehicle leaves at 80 km / h at the same time a cyclist leaves at 20 km / h at what distance is they from each other after 5 hours.

Distance traveled by A in 5 hours = speed x time = 80 x 5 = 400 km

Distance traveled by B in 5 hours = speed x time = 20 x 5 = 100 km

The distance between them after 5 hours =  400 - 100 = 300 km

Answer:

a) the work (W) done during the process is -2043.25 kJ

b) the work (W) done during the process is -2418.96 kJ

Explanation:

Given the data in the question;

mass of water vapor m = 10 kg

initial pressure P₁ = 550 kPa

Initial temperature T₁ = 340 °C

steam cooled at constant pressure until 60 percent of it, by mass, condenses; x = 100% - 60% = 40% = 0.4

from superheated steam table

specific volume v₁ = 0.5092 m³/kg

so the properties of steam at p₂ = 550 kPa, and dryness fraction

x = 0.4

specific volume v₂ = v[tex]_f[/tex] + xv[tex]_{fg[/tex]

v₂ = 0.001097 + 0.4( 0.34261 - 0.001097 )

v₂ = 0.1377 m³/kg

Now, work done during the process;

W = mP₁( v₂ - v₁ )

W = 10 × 550( 0.1377 - 0.5092 )

W = 5500 × -0.3715

W = -2043.25 kJ

Therefore, the work (W) done during the process is -2043.25 kJ

( The negative, indicates work is done on the system )

b)

What would the work done be if steam were cooled at constant pressure until 80 percent of it, by mass, condenses

x₂ = 100% - 80% = 20% = 0.2

specific volume v₂ = v[tex]_f[/tex] + x₂v[tex]_{fg[/tex]

v₂ = 0.001097 + 0.2( 0.34261 - 0.001097 )

v₂ = 0.06939 m³/kg

Now, work done during the process will be;

W = mP₁( v₂ - v₁ )

W = 10 × 550( 0.06939 - 0.5092 )

W = 5500 × -0.43981

W = -2418.96 kJ

Therefore, the work (W) done during the process is -2418.96 kJ

Answer: D. F represents the activation energy

Explanation:

The activation energy is the energy required to get the reactants to begin reacting with one another such that products are created. This energy ranges from the minimum to the maximum energy required.

F is therefore the activation energy because it shows the range between the minimum energy it took for the reaction to start and the maximum energy that was required to continue the reaction.

Explanation:

The area of a circle of radius r is given by

[tex]A = \pi r^2[/tex]

Taking the derivative of A with respect to time t, we get

[tex]\dfrac{dA}{dt} = 2\pi r \dfrac{dr}{dt}[/tex]

We also know that

[tex]\dfrac{dr}{dt} = 2\:\text{m/s}\:\text{at}\:r = 39\:\text{m}[/tex]

[tex]\dfrac{dA}{dt} = 2\pi (39\:\text{m})(2\:\text{m/s})= 490\:\text{m}^2\text{/s}[/tex]

Answer:

1) attached below

2) assumption that the earth is spherical

Explanation:

1) Four illustrations of a globe

attached below

2) Reason for distortions at areas that do not fall on lines of tangency or secancy

The reason for distortion on areas outside the lines of tangency or secancy is because of the assumption that the earth is spherical which is not true hence map projections on the areas that fall on the lines of tangency do not experience distortion and are true

Answer:

1.56 m/s²

Explanation:

Projectile motion is a form of motion where an object moves in parabolic path (trajectory). Projectile motion only occurs when there is one force applied at the beginning on the trajectory, after which the only interference is from gravity.

The total time (time of flight) of an object is given by:

T = 2usinθ / g

where u is the initial velocity, θ is the angle with horizontal and g is the acceleration due to gravity

Since the astronaut throws a rock straight up, hence θ = 90°, u = 19 m/s, T = 24.4 s.

T = 2usinθ / g

Substituting:

24.4 = 2(19)(sin90)/g

g = 2(19)(sin90) / 24.4

g = 1.56 m/s²

Answer:

A gold medal has the (minimum) dimensions of:

diameter = 60mm

thickness = 3mm

So we will work with those dimensions.

The medal is then a cyinder of diameter

D = 60mm = 6cm

and height:

H = 3mm = 0.3cm

Remember that the volume of a cylinder is:

V = pi*(D/2)^2*H

where pi = 3.14

Then the volume of a medal is:

V = 3.14*(6cm/3)^2*0.3cm = 3.768 cm^3

The density of the gold in g/cm^3 is:

d = 19.3 g/cm^3

And remember that:

density = mass/volume

So, if the volume is 3.768 cm^3

Then the mass will be:

mass = density*volume =  19.3 g/cm^3*3.768 cm^3 = 72.7 g

So, a single gold medal would weight 72.7 grams

And each gram of gold costs $40

Then the total cost of the gold medal would be:

value = $40*72.7 = $2,908

Now, if yo think that in the Olympics there are 35 sports (a lot with a large number of players) and near 50 disciplines, they need a lot of gold medals.

And each gold medal costs $2,908

So the total cost (only for the gold medals, ignoring the others) would be to high.

This is why the gold medals are made mostly of silver.

Answer:

Images formed by a convex mirror are always ​virtual

Explanation:

A virtual image is always created by a convex mirror, and it is always situated behind the mirror. The picture is vertical and situated at the focus point when the item is far away from the mirror. As the thing approaches the mirror, the image follows suit and increases until it reaches the same height as the object.

OAmalOHopeO

we know density = mass/ volume

as mass = 0.6 g

and volume = 2cm³

so density = (6/20)(g/cm³)

0.3g/cm³ (ans)

Hope it helps

Answer:

how to solve this problem ???????

The magnitude of the resultant force is 919.6 N and the value of angle θ is 36.87⁰.

The resultant of the two forces is determined by resolving the force into x and y component as shown below;

[tex]F_1_x + F_2x_x = F_R_x \ --- (1) \\\\F_1_y + F_2_y = F_R_y\ ---(2)[/tex]

where;

The value of Angle θ is determined from equation (1)

-500sinθ + 600sin(30) = 0

500sinθ = 600sin(30)

500sinθ = 300

sinθ = 3/5

θ = 36.87⁰

The resultant of the forces is determined using the second equation;

500cosθ + 600cos(30) = R

500 x cos(36.87) + 600 x cos(30) = R

919.6 N = R

Learn more about resultant forces here: https://brainly.com/question/25239010

Answer:

f = 1 m

Explanation:

The magnification of the lens is given by the formula:

[tex]M = \frac{q}{p}[/tex]

where,

M = Magnification = 4

q = image distance = 5 m

p = object distance = ?

Therefore,

[tex]4 = \frac{5\ m}{p}\\\\p = \frac{5\ m}{4}\\\\p = 1.25\ m[/tex]

Now using thin lens formula:

[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}\\\\\frac{1}{f} = \frac{1}{1.25\ m}+\frac{1}{5\ m}\\\\\frac{1}{f} = 1\ m^{-1}\\\\[/tex]

f = 1 m

Answer:

[tex]N=0.37N[/tex]

Explanation:

Mass [tex]m=55g=>0.055kg[/tex]

Soapstone Density [tex]\rho_s=3000kg/m^2[/tex]

Whisky Density [tex]\rho_w=940kg/m^2[/tex]

Generally the equation for Force is mathematically given by

 [tex]F=U+N[/tex]

Therefore

 [tex]N=m*g-(\frac{m}{\rho_s})*\rho_w*g[/tex]

 [tex]N=0.055*9.81 - {(\frac{0.055}{3000})*940*9.81}[/tex]

 [tex]N=0.37N[/tex]

Answer:

Explanation:

From the information given:

The angular frequency ω = 430 π rad/s

The wavenumber k = 4.00π which can be expressed by the equation:

k = ω/v

∴

4.00 =  430 /v

v = 430/4.00

v = 107.5 m/s

Similarly: k  = ω/v = 2πf/fλ

We can say that:

k = 2π/λ

4.00 π = 2π/λ

wavelength λ = 2π/4.00 π

wavelength λ = 0.5 m

frequency of the wave can now be calculated by using the formula:

f = v/λ

f = 107.5/0.5

f = 215 Hz

Also, the Period(T) = 1/215 secs

The time at which particle proceeds from point A  to its maximum upward displacement  and to its maximum downward displacement  can be computed as t = T/2;

Thus, the distance(x) covered by each wave during this time interval(T/2) will be:

x = v * t

x = v * T/2

x = λ/2

x = 0.5/2

x =  0.25 m

Answer:

towards the center

Explanation:

that is the solution above