Choose the list of items that starts with the least dense and ends with the most dense:
A: water, alcohol, ping pong ball
B: milk, maple syrup, honey
C: bolt, cherry tomato, soda cap
D: corn syrup, dish soap, lamp oil

To solve this problem, we need to use stoichiometry to relate the volume of methane to the volumes of steam, carbon monoxide, and hydrogen produced.

The balanced chemical equation is:

CH4 (g) + H2O(g) → CO(g) + 3H2 (g)

The stoichiometric ratio of steam to methane is 1:1, so the volume of steam needed is also 53.50 L.

To determine the volumes of carbon monoxide and hydrogen gas produced, we need to use the stoichiometric coefficients in the balanced equation. For every 1 mole of methane consumed, 1 mole of steam is consumed, 1 mole of carbon monoxide is produced, and 3 moles of hydrogen gas are produced.

First, we need to convert the volume of methane gas to moles using the ideal gas law:

PV = nRT

n = PV/RT

n = (1 atm) x (53.50 L) / [(0.08206 L·atm/mol·K) x (298 K)]

n = 2.189 mol

Therefore, 2.189 moles of methane react with 2.189 moles of steam to produce 2.189 moles of carbon monoxide and 6.567 moles of hydrogen gas.

To convert the moles of each gas to volume, we use the ideal gas law again:

V = nRT/P

For carbon monoxide:

n = 2.189 mol

R = 0.08206 L·atm/mol·K

T = 298 K

P = 1 atm

V = (2.189 mol) x (0.08206 L·atm/mol·K) x (298 K) / (1 atm)

V = 53.68 L

For hydrogen gas:

n = 6.567 mol

R = 0.08206 L·atm/mol·K

T = 298 K

P = 1 atm

V = (6.567 mol) x (0.08206 L·atm/mol·K) x (298 K) / (1 atm)

V = 160.76 L

The total volume of gas produced is the sum of the volumes of carbon monoxide and hydrogen gas:

53.68 L + 160.76 L = 214.44 L

Therefore, the volume of steam needed is 53.50 L, the volume of carbon monoxide produced is 53.68 L, the volume of hydrogen gas produced is 160.76 L, and the total volume of gas produced is 214.44 L.

Answer: 185.5 L.

Explanation: To solve this question, we need to use the stoichiometry of the chemical reaction to determine the amounts of each gas produced. The balanced chemical equation is:

CH4 (g) + H2O(g) → CO(g) + 3H2(g)

According to the stoichiometry of the reaction, 1 mole of methane reacts with 1 mole of water to produce 1 mole of carbon monoxide and 3 moles of hydrogen. Therefore, we can use the ideal gas law to calculate the volumes of each gas produced.

Given that the initial volume of methane gas is 53.50 L, we can first calculate the number of moles of methane present using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Since the pressure and temperature are constant, we can write:

n = PV/RT

where R = 0.08206 L atm/K mol is the gas constant.

n(CH4) = (1 atm)(53.50 L)/(0.08206 L atm/K mol)(298 K) = 2.23 mol

This means that 2.23 moles of methane react with 2.23 moles of water to produce 2.23 moles of carbon monoxide and 6.69 moles of hydrogen.

To determine the volume of water needed to react with all the methane, we can use the stoichiometry of the reaction again:

1 mol CH4 reacts with 1 mol H2O

Therefore, the number of moles of water required is also 2.23 mol. We can calculate the volume of water using the ideal gas law:

n(H2O) = PV/RT

V(H2O) = n(H2O)RT/P = (2.23 mol)(0.08206 L atm/K mol)(298 K)/(1 atm) = 46.4 L

Therefore, the volume of steam required to react with all the methane is 46.4 L.

Next, we can use the stoichiometry of the reaction to calculate the volumes of carbon monoxide and hydrogen produced:

1 mol CH4 produces 1 mol CO

1 mol CH4 produces 3 mol H2

Therefore, the number of moles of carbon monoxide and hydrogen produced are also 2.23 mol and 6.69 mol, respectively. We can calculate their volumes using the ideal gas law:

V(CO) = n(CO)RT/P = (2.23 mol)(0.08206 L atm/K mol)(298 K)/(1 atm) = 46.4 L

V(H2) = n(H2)RT/P = (6.69 mol)(0.08206 L atm/K mol)(298 K)/(1 atm) = 139.1 L

Therefore, the volume of carbon monoxide produced is 46.4 L and the volume of hydrogen produced is 139.1 L.

The total volume of gas produced is the sum of the volumes of carbon monoxide and hydrogen:

V(total) = V(CO) + V(H2) = 46.4 L + 139.1 L = 185.5 L

Therefore, the total volume of gas produced is 185.5 L.

Text me for any other issues.

The density of the metal has the high inherit percentage of error than the value for the liquid because the possibility error in measuring the volume of the solid is more than the liquid.

The density is expressed as follows :

Density = mass / volume

The volume of the solid cannot be measure directly. The volume of the solid can be measured by immersing the solid in to the liquid and then we measure the volume of the liquid displaced. The possibility error in measuring the volume of the solid, especially when the shape of the solid is irregular, is more than the liquid.

To learn more about density here

https://brainly.com/question/29775886

#SPJ4

A. The actual outcome of the experiment will depend on the specific details of the charges on the strips and the stream of water. However, in general, a charged strip will experience a force when brought near a stream of running water due to the interaction between the electric field of the strip and the movement of the charged water molecules.

b. If the prediction was incorrect, it could be due to a number of factors, such as the magnitude of the charge on the strip, the size of the stream, and the distance between the strip and the stream. Additionally, other factors such as the properties of the air and the presence of other substances in the water could also affect the outcome.

a. The shape of the H2O molecule is bent or angular.

b. Is it symmetrical?

No, the H2O molecule is not symmetrical.

c. Does this mean that the H2O molecule is polar or nonpolar?

The bent shape of the H2O molecule means that it is a polar molecule.

a. What is the shape of the CCl4 molecule?

The shape of the CCl4 molecule is tetrahedral.

b. Is it symmetrical?

Yes, the CCl4 molecule is symmetrical.

c. Does this mean that the CCl4 molecule is polar or nonpolar?

The symmetrical shape of the CCl4 molecule means that it is a nonpolar molecule.

a. charged acetate strip:

If a charged acetate strip were brought near a stream of CCl4, it is likely that the strip would experience no effect, as CCl4 is a nonpolar molecule and does not have a significant electric field.

b. charged vinyl strip:

If a charged vinyl strip were brought near a stream of CCl4, it is likely that the strip would experience no effect, as CCl4 is a nonpolar molecule and does not have a significant electric field.

c. Explain your predictions.

The lack of an effect in both cases is due to the nonpolar nature of CCl4, which means that it does not have a significant electric field. Since a charged strip experiences a force due to the interaction between its electric field and the electric field of a surrounding material, a nonpolar material like CCl4 will not produce a significant effect on a charged strip.

Chemists have found that charged acetate and vinyl strips have no effect on a stream of CCl4. Does this fact match your prediction?

Yes, this fact matches the prediction, as CCl4 is a nonpolar molecule and does not have a significant electric field that would interact with the charged acetate or vinyl strips.

learn more about polar property: https://brainly.com/question/1051329

#SPJ1

This reaction with 25 grams of iron 3 phosphate and an excess of sodium sulfate, 33.190 grams of  iron 3 sulfate.

The term Stoichiometry is defined as a section of chemistry that involves using relationships between reactants and products in a chemical reaction to determine desired quantitative data.

Step 1.

In any stoichiometry question is to find the molecular weights of the compounds involved:

FePO4 = 55.845+ 30.974 + 16*4

= 150.819 g/mol

Fe2(SO4)3 = 55.845*2 + (32.065+16*4)*3

= 399.885 g/mol

Step 2.

To find the number of moles of your reactant, FePO4:

grams of substance/molecular weight of substance= moles of substance

25g/150.819g/mol= 0.166 moles of FePO4

So, think about the proportion of how many moles of your reactant there are for each mole of your product. In this case, there are 2 moles of FePO4 for every 1 mole of Fe2(SO4)3.

0.166 mole FePO4 * 1 mole Fe2(SO4)3/ 2 moles of FePO4

= .083 mole of Fe2(SO4)

Now, multiply the number of moles of your product by its molecular weight:

0.083 moles of Fe2(SO4)3 × 399.885 g/mol

= 33.190 grams of Fe2(SO4)3

Thus, 33.190 grams of  iron 3 sulfate.

To learn more about the stoichiometry, follow the link;

https://brainly.com/question/30218216

#SPJ1

After the second stage of something like the pyruvate dehydrogenase process, thioester bonds form.

Thioesters have a significant impact on metabolism. Particularly in the case of metabolism of fatty acids. Acetyl CoA, the major metabolite, seems to be a thioester that would be primarily created by the oxidative cleavage of dopamine or by the breakdown of fatty acids.

For instance, a thiolate (RS-) is just a weaker bases and better donating group than an alcoxide, making a thioester more sensitive than an ester (RO-). Remember from paragraph 6 that a thiol's pKa is approximately 10, whereas an alcohol's pKa is 15 or higher this means that a larger conjugate acid results in a lesser conjugate base.

To know more about thioester visit:

https://brainly.com/question/28216093

#SPJ1

Answer:

c.Positively charged electrons

RF value will increase if the eluent was changed to 3:1 hexanes/ethyl acetate.

Explain about Rf value?

RF value (or Retention Factor) is a measure of a compound's retention time in a chromatographic process. It is calculated by dividing the retention time of a compound by the retention time of a reference compound (typically a known standard). RF values are used to compare the retention times of compounds within a given chromatographic system. They are also used to identify unknown compounds by comparing their retention time to a database of known compounds.

The change in the eluent composition will affect the retention factor (RF) of the product in the thin-layer chromatography (TLC) analysis. In general, a change in the eluent composition from 5:3 hexanes/ethyl acetate to 3:1 hexanes/ethyl acetate will result in a change in the RF value. It's difficult to predict exactly how the RF value will change without conducting the experiment, but it's possible that the RF value will increase with the new eluent. This is because increasing the concentration of hexanes and decreasing the concentration of ethyl acetate will result in a more nonpolar solvent, which may result in a stronger partitioning of the product into the solvent and a longer distance traveled up the TLC plate.

Therefore, the RF value will increase.

To learn more about Rf value from the link

https://brainly.com/question/29387153

#SPJ4

O2 is a reactant in chemical reactions, meaning that it is the substance that is involved in the process of producing new products.

It can also be a product in certain types of reactions. O2 is a molecule composed of two oxygen atoms, and it is essential for life as it is a byproduct of photosynthesis. In chemical reactions, O2 is highly reactive, often forming bonds with other elements and molecules. This is due to its low ionization energy and high electronegativity. When O2 is involved in a reaction, the reaction often requires a large amount of energy to initiate, but the products have lower energy than the reactants, releasing energy in the process. O2 is also an important component of respiration in most organisms, allowing them to produce energy from the breakdown of organic molecules. In general, O2 is an essential element in most processes involving energy production, as it is involved in numerous oxidation-reduction reactions.

Learn more about reactant here:

https://brainly.com/question/17096236

#SPJ4

Answer:  Sufficient volume of air is present in lump of cotton wool. then dipped in water, this air goes out due to which the cotton lump shrunk.

yes

Nonpolar molecular solid does not have a large quantity of charge at extreme end.  In the polar molecular solids, Hydrogen bonds occur.

Nonpolar solids which are also known as Non-polar molecular solids are composed of weak dispersion forces and are soft by nature. Their molecules are held by weak London forces or dispersion forces. Nonpolar solids mostly exist in a gaseous or liquid state At room temperature and pressure.

Hydrogen Bonded Molecular Solids have polar covalent bonds between hydrogen and fluorine or Oxygen Nitrogen atoms. Strong hydrogen bonding binds molecules of solids as H2O in ice form.

so we can conclude that there is no profusion of charge at the opposite end in the Nonpolar molecular solid.  Hydrogen bonds occur in polar molecular solids.

Learn more about hydrogen bonds here:https://brainly.com/question/1420470

#SPJ1

The reaction for the production of potassium chloride from hydrochloric acid and potassium hydroxide is:

HCl + KOH → KCl + H2O

From the reaction, it takes 1 mole of HCl to produce 1 mole of KCl.

So, to produce 2.5 moles of KCl, we would need 2.5 moles of HCl.

In chemistry, a reaction is a process by which one or more compounds change into one or more other ones. Chemical bonds between atoms or molecules are often broken and new ones are generated as a result of this transition. Energy can be released or absorbed during reactions, which can happen naturally or be produced by a number of factors like heating, cooling, adding a catalyst, or being exposed to light.

In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products. In contrast to the reactants, the products have diverse properties. Physical changes, which include state transitions like ice melting to water and water evaporating to vapor, are different from chemical processes.

To know more about reaction, check out:

https://brainly.com/question/16416932

#SPJ1

Evaporate then condense then precipitate then runoff

Explanation:

greenhouses use this information

lot of cold places like in russia have greenhouses to grow crops

you make a mini version of a greenhouses in your home with a soda bottle

Water Cycle Transformations

The water cycle depends on the transformation of water into different forms. Starting as liquid, water can:

Evaporate: The transformation of liquid water into water vapor is important for the water cycle. When water on the Earth's surface, such as in oceans, lakes, and rivers, is heated by the sun, it turns into water vapor and rises into the atmosphere.

Condense: As the water vapor rises, it cools and transforms back into liquid water through a process called condensation. This is important because the water droplets eventually form clouds, which can lead to precipitation.

Precipitate: Precipitation is another important transformation of water in the water cycle. When the clouds become heavy with water droplets, they release the water in the form of rain, snow, sleet, or hail.

Runoff: The water that falls to the ground in precipitation can then flow over the surface of the land, as runoff, eventually making its way back into the oceans, lakes, and rivers, where the cycle starts again.

The transformation of water from one state of matter to another is essential for the water cycle because it ensures that water is continually recycled and available for plants, animals, and humans to use. Without these transformations, the water on Earth would not be able to sustain life as we know it.

chatgpt

Enthalpy of formation is not a colligative property. Colligative properties are physical properties of a solution that depend on the concentration of solute particles in the solution, but not on their chemical identity.

Examples of colligative properties include freezing point depression, boiling point elevation, and vapor pressure lowering.

Enthalpy of formation, on the other hand, is the energy change associated with the formation of a substance from its constituent elements in their standard states. It is a thermodynamic quantity and is not dependent on the concentration of solute particles in a solution. Hence, the enthalpy of formation is not a colligative property.

Freezing point depression and boiling point elevation are two of the most important colligative properties. Freezing point depression occurs when the freezing point of a solvent decreases in the presence of a solute. Boiling point elevation occurs when the boiling point of a solvent increases in the presence of a solute.

You can read more about Enthalpy at https://brainly.com/question/14047927

#SPJ4

One mole of O2 has approximately the same mass as one mole of methanol.

Recall that: mole = mass/molar mass, hence, mass = mole x molar mass.

O2 has a molar mass of 32 g/mol

Using the above equation, the mass of one mole of O2 will be:

Mass of 1 mole O2 = 1 x 32 = 32 grams

Methanol has a molar mass of 32 g/mol.

Mass of 1 mole [tex]CH_3OH[/tex] = 1 x 32 = 32 grams.

In other words, 1 mole of O2 will have approximately the same mass as 1 mole of CH3OH.

More on mass and mole of substances can be found here: https://brainly.com/question/21042927

#SPJ1

According to the stoichiometry of the reaction taking place between titanium (IV) chloride and  magnesium chloride  , 50.197 g  of magnesium chloride are produced if 50 g TiCI is completely reacted.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.In the given reaction, 189.67 g titanium (IV) chloride gives 190.42 g  magnesium chloride, thus 50 g titanium (IV) chloride will give 50×190.42/189.67= 50.197 g

Thus,50.197 g  of magnesium chloride are produced if 50 g TiCI is completely reacted.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

The total time for the training is 21 hours.

We can see that what we have here is a percentage of the total time that the team can spent as a part of the training that they have to pass through and this is what we are going to use to carry out the calculation that we have in the case of this problem.

Hence we can see that;

Total time that is spent = x

The percentage of the time that is spent of fitness = 35%

The allotted time for fitness is 441 minutes

Thus we have that;

35/100 * x = 441

x = 441 * 100/35

x = 1260 minutes or 21 hours

Learn more about percentage:https://brainly.com/question/29306119

#SPJ1

The number of moles is 257143 moles

The volume of one mole of a gas at a given temperature and pressure depends on the specific gas and the conditions.

However, under standard conditions of temperature and pressure (STP), one mole of any ideal gas occupies a volume of 22.4 liters.

This value is known as the molar volume of an ideal gas at STP and is a useful conversion factor in many chemistry problems involving gases.

We know that;

1 mole = 22.4 L

x moles = 5.76 * 10^6 L

x = 257143 moles

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

If a block has the following dimensions: length of 2.50 cm. width of

1.00 cm and height of 2.00 cm. The density of the density of the block is: 30.0 g/cm^3.

The volume of the block can be calculated by multiplying the length, width and height:

V = 2.50 cm x 1.00 cm x 2.00 cm = 5.00 cm^3

The density of the block can then be calculated by dividing the mass by the volume:

Density = mass/volume

Density = 150.0 g / 5.00 cm^3

Density = 30.0 g/cm^3

Therefore the density is  30.0 g/cm^3.

Learn more about density here:https://brainly.com/question/1354972

#SPJ1

Solid cu has an 8.96 g/cm3 density. Per cubic centimeter (cm3) of cu, there are 3.61*10⁻⁸ atoms.

Molar mass of Cu = 63.546 gm/mol

according to avogadro's law, 1 mol of a substance contains 6.022*10²³ atom

thus, 63.546 gm Cu contains 6.022*10²³ atom

density of Cu = 8.96g/cm³ that mean 1 cm3 contain 8.96 gm Cu

we have to calculate 63.546 gm Cu containing 6.022*10²³ atom then 8.96 gm Cu contains how many atom calculations are given as below.

63.546/8.96 =  6.022*10²³?

? = 6.022*10²³*8.96/63.546

=8.494*10²² atom

1 cubic centimeter of Cu contains 8.494*10²² atom

Cu adopts FCC unit cell so contains 4 atoms in each unit cell

one cubic centimeter contains 8.494*10²² atom

therefore one cubic centimeter contains 8.494*10²²/4 =2.1235*10²² unit cell

2.1235*10²²unit cell have volume 1 cm³then 1 unit cell have volume 1/2.1235*10²² =4.72*10⁻²³ cm3

Edge = (4.72*10⁻²³ cm³)1/3 =3.61*10⁻⁸cm

Learn more about density here:

https://brainly.com/question/29775886

#SPJ4

The temperature of a system in thermal equilibrium with another system made up of water and steam at 1 atm of pressure would be 100 degrees Celsius (or 373 Kelvin). This is the boiling point of water at 1 atm of pressure and is the temperature at which water and steam coexist in equilibrium.

Thermal equilibrium is a state in which two or more objects at different temperatures are placed in thermal contact, and as a result of this, they eventually reach a common temperature. In other words, thermal equilibrium is the state in which no net heat flow occurs between the objects. The common temperature they reach depends on the specific heat capacities and masses of the objects and the initial temperatures of each.

For example, if a hot piece of metal and a cold piece of metal are placed in thermal contact, heat will flow from the hot piece of metal to the cold piece of metal until both pieces reach the same temperature. Once this occurs, the two pieces are said to be in thermal equilibrium.

Learn more about thermal equilibrium here:

https://brainly.com/question/29419074

#SPJ4

The molar mass of the unknown gas is 184.96 g/mol.

Graham's law of diffusion states that "the rate of diffusion of a gas is inversely proportional to the square root of the molar mass".

R ∝ 1/ √M

R₁/R₂ = √(M₂/M₁)

Rate of unknown gas (R₁) = R

Rate of CH₄ (R₂) = 3.4R

Molar mass of CH₄ (M₂) = 16 g/mol

Molar mass of unknown gas (M₁) =?

The molar mass of the unknown gas can be obtained as follow:

R₁/R₂ = √(M₂/M₁)

R / 3.4R = √(16 / M₁)

1 / 3.4 = √(16 / M₁)

Squaring both sides

(1 / 3.4)² = 16 / M₁

Cross multiplying

(1 / 3.4)² × M₁ = 16

Dividing both sides by (1 / 3.4)²

M₁ = 16 / (1 / 3.4)²

M₁ = 184.96 g/mol

Hence, the molar mass of the unknown gas is 184.96 g/mol.

Learn more about molar mass from the link given below.

https://brainly.com/question/12127540

#SPJ4

The results illustrate the law of multiple proportions since the oxygen atoms in A and B are in simple multiple ratios.

The formula of the oxides is SO₃ and SO₂ respectively.

Mass of sulfur in A = 3.50 g

Moles of sulfur in A = 3.50/32

Moles of sulfur in A = 0.11 moles

Mass of oxygen in A = 6.05 g

Moles of oxygen in A = 6.05/16

Moles of oxygen in A = 0.38

The mole ratio of sulfur to oxygen = 0.11 : 0.38

The mole ratio of sulfur to oxygen = 1 : 3

The formula of oxide = SO₃

Mass of sulfur in B = 2.80 g

Moles of sulfur in B = 2.80/32

Moles of sulfur in B = 0.088 moles

Mass of oxygen in B = 2.80 g

Moles of oxygen in B = 2.80/16

Moles of oxygen in B = 0.175

The mole ratio of sulfur to oxygen = 0.088 : 0.175

The mole ratio of sulfur to oxygen = 1 : 2

The formula of oxide = SO₂

The oxygen atoms in A and B are in simple multiple ratio.

Learn more about the law of multiple proportions at: https://brainly.com/question/2624012

#SPJ1

If you were to look at a solution of K₃PO₄ (aq), you would see the following molecules and ions: Potassium ions (K+), Phosphate ions (PO₄³⁻) and Water molecules (H₂O).

Among these species, the phosphate ions (PO₄³⁻) would make up the least amount of the solution, as they are negatively charged and are counterbalanced by the positively charged potassium ions (K⁺). On the other hand, the water molecules (H₂O) would make up the majority of the solution, as they are not charged and are neutral.

Tripotassium phosphate, also known as tribasic potassium phosphate is a water-soluble salt having chemical formula K₃PO₄.(H₂O)x. Tripotassium phosphate is produced by the neutralization of the phosphoric acid.

To know more about phosphate ions here

https://brainly.com/question/19197985

#SPJ4

The molar mass of the unknown gas is 8.05 g/mol.

The ratio of effusion of an unknown gas to oxygen is 0.50:1, which means that the effusion rate of the unknown gas is half that of oxygen. Effusion is the process by which a gas escapes through a tiny hole into a vacuum, and the rate of effusion is directly proportional to the square root of the gas' molar mass. So, we can use this relationship to calculate the molar mass of the unknown gas.

Let's assume that the molar mass of oxygen is 32 g/mol. Then, the square root of the molar mass of oxygen is √32 = 5.66. If the effusion rate of the unknown gas is half that of oxygen, then the square root of its molar mass is 0.5 * 5.66 = 2.83. Taking the square of 2.83 gives us 8.05, which is the molar mass of the unknown gas.

Therefore, the molar mass of the unknown gas is 8.05 g/mol.

Learn more about effusion rates here: https://brainly.com/question/2655041

#SPJ4

The new pH of the solution after adding 200.00 mL of 1.50 M HCl to 5.70 L of the buffer in part A would be approximately 2.43.

pH is calculated by taking the negative logarithm of the hydrogen ion concentration in the solution. The hydrogen ion concentration for the solution after adding the HCl can be calculated using the Henderson-Hasselbalch equation, which states that pH = pKa + log([A-]/[HA]). In this case, the pKa of the buffer is 4.76 and the initial [A-]/[HA] ratio is 0.20.

After adding the HCl, the [A-]/[HA] ratio will decrease to 0.0166, giving a new pH of 2.43.

Learn more about Ph of a solution:

https://brainly.com/question/26424076

#SPJ4

A solution of 18.8 g of ammonia (nh3), 129.2 g water, which has a volume of 156 ml ha s weight percent  12.76%, mole fraction 0.131, and molarity  7.05 mol/L.

First, we'll calculate the number of moles of ammonia (NH3) in the solution:

moles of NH3 = mass of NH3 / molecular mass of NH3

moles of NH3 = 18.8 g / 17.03 g/mol = 1.10 mol

Next, we'll find the weight percent of NH3 in the solution:

weight percent of NH3 = (mass of NH3 / total mass of solution) x 100

total mass of solution = mass of NH3 + mass of water

total mass of solution = 18.8 g + 129.2 g = 148.0 g

weight percent of NH3 = (18.8 g / 148.0 g) x 100 = 12.76%

Next, we'll find the molality of NH3 in the solution:

molality = moles of solute / mass of solvent (in kilograms)

mass of solvent (water) = 129.2 g

mass of solvent in kilograms = 129.2 g / 1000 g/kg = 0.1292 kg

molality = 1.10 mol / 0.1292 kg = 8.51 mol/kg

Next, we'll find the mole fraction of NH3 in the solution:

mole fraction of NH3 = moles of NH3 / (moles of NH3 + moles of water)

moles of water = 129.2 g / 18.015 g/mol = 7.16 mol

mole fraction of NH3 = 1.10 mol / (1.10 mol + 7.16 mol) = 0.131

Finally, we'll find the molarity of NH3 in the solution:

molarity = moles of solute / volume of solution (in liters)

volume of solution = 156 ml

volume of solution in liters = 156 ml / 1000 ml/L = 0.156 L

molarity = 1.10 mol / 0.156 L = 7.05 mol/L

So, the weight percent of NH3 in the solution is 12.76%, the molality of NH3 is 8.51 mol/kg, the mole fraction of NH3 is 0.131, and the molarity of NH3 is 7.05 mol/L.

To know more about mole fraction please refer:

https://brainly.com/question/29905133

#SPJ4

Kevlar has the highest tensile strength of the choices with a tensile strength of 8.3 GPa, followed by spider silk with a tensile strength of 4.5 GPa.

Tensile strength is the maximum amount of tensile stress that a material can take before failing or breaking. It is the maximum amount of force that a material can withstand when being stretched or pulled. It is measured in units of force per unit area, such as pounds per square inch (psi) or megapascals (MPa). Tensile strength is an important property of materials because it tells us how much force a material can withstand before it breaks.

Butyl rubber and polyethylene both have a tensile strength of around 0.5 GPa.

To learn more about tensile strength
https://brainly.com/question/15604103
#SPJ4

The conformation of a polypeptide's backbone is described by the angles of rotation about the peptide bonds.

The most common type of conformation is an alpha helix, in which the peptide bond rotates at an angle of approximately 100 to 120 degrees in a clockwise direction. This arrangement of the peptide bond contributes to an increase in the stability of the polypeptide, as the bonds form hydrogen bonds between the amino acids. This arrangement also allows for more efficient folding of the polypeptide, allowing for better functionality of the proteins involved. To calculate the angle of rotation for a given polypeptide, the bond length, bond angle, and torsional angle must all be known. First, the bond length must be determined from the x-ray data.

Learn more about conformation here:

https://brainly.com/question/15215912

#SPJ4

Statement-1 is the correct answer that is Endothermic reactions absorb heat energy while exothermic reactions release heat energy.

How can we distinguish between exothermic and endothermic processes?

Chemical reactions that release energy are referred to as exothermic. More energy is produced than is needed to break the bonds between the reactants when bonds are formed in the byproducts of exothermic processes.

Chemical processes that either use or absorb energy are referred to as endothermic. In endothermic reactions, more energy is absorbed when bonds in the reactants are broken than is released when new bonds are formed in the products. Since an isothermic chemical reaction uses exactly as much energy as it produces, there is no net energy change.

Therefore, the first statement is the right response.

To know more about exothermic, check out:

brainly.com/question/2924714

#SPJ1