Choose the force diagram that best represents a ball thrown upward by Peter, at the
top of its path.

Diagram A
Diagram B
Diagram C
Diagram D

Answer:

stress = 98000 N/m^2

strain = 3.92 x 10^-6

change in height = 0.0196 mm

Explanation:

Height, h = 5 m

Area, A = 3 m²

mass, m = 30000 kg

Stress is defined as the force per  unit area.

[tex]stress = \frac{mg}{A}\\\\stress = \frac{30000\times 9.8}{3}\\\\stress = 98000 N/m^2[/tex]

Young's modulus of concrete is Y = 2.5 x 10^10 N/m^2

Young's modulus is defined as the ratio of stress to the strain.

[tex]Y = \frac{stress}{strain}\\\\2.5\times 10^{10}= \frac{98000}{strain}\\\\strain = 3.92\times 10^{-6}[/tex]

let the change in height is h'.

Strain is defined as the ratio of change in height to the original height.

[tex]3.92\times 10^{-6} = \frac{h'}{5}\\\\h' = 1.96\times 10^{-5}m = 0.0196 mm[/tex]

Phytochemicals are compounds that are produced by plants ("phyto" means "plant"). They are found in fruits, vegetables, grains, beans, and other plants. Some of these phytochemicals are believed to protect cells from damage that could lead to cancer.

Answer:

: No, a clinical thermometer cannot be used to measure the temperature of boiling water because it has a small range and might break due to extreme heat. ... The temperature is around 100 degrees Celsius.

Answer:

A) 8GMm/d^2

Explanation:

We are given that

[tex]m_1=M[/tex]

[tex]m_2=3M[/tex]

[tex]m_3=m[/tex]

Distance between m1 and m2=d

Distance of object of mass m from m1 and m2=d/2

Gravitational force formula

[tex]F=\frac{Gm_1m_2}{r^2}[/tex]

Using the formula

Force acting between m and M is given by

[tex]F_1=\frac{GmM}{d^2/4}[/tex]

Force acting between m and 3M is given by

[tex]F_2=\frac{Gm(3M)}{d^2/4}[/tex]

Now, net force acting on  object of mass is given by

[tex]F=F_2-F_1[/tex]

[tex]F=\frac{Gm(3M)}{d^2/4}-\frac{GmM}{d^2/4}[/tex]

[tex]F=\frac{12GmM}{d^2}-\frac{4GmM}{d^2}[/tex]

[tex]F=\frac{12GmM-4GmM}{d^2}[/tex]

[tex]F=\frac{8GmM}{d^2}[/tex]

Hence, the magnitude of the force on the object with mass m=[tex]\frac{8GmM}{d^2}[/tex]

Option A is correct.

Answer:

Physical properties are properties that can be measured or observed without changing the chemical nature of the substance. Some examples of physical properties are:

color (intensive)

density (intensive)

volume (extensive)

mass (extensive)

boiling point (intensive): the temperature at which a substance boils

melting point (intensive): the temperature at which a substance melts

Explanation:

Answer:

The velocity is 2661.5 m/s.

Explanation:

Radius, horizontal distance, d = 309 km

height, h = 25 km

acceleration due to gravity on moon, g =3.71 m/s^2

Let the time taken is t and the horizontal velocity is u.

horizontal distance = horizontal velocity x time

309 x 1000 = u t .... (1)

Use second equation of motion in vertical direction.

[tex]h = u_yt +0.5 gt^2\\\\25000 = 0 + 0.5\times 3.71\times t^2\\\\t =116.1 s[/tex]  

So, put in (1)

309 x 1000 = u x 116.1

u = 2661.5 m/s

Explanation:

hope it helps !!!!!!!!!!!!!

If an object of a constant mass experiences a constant net force, it will have a constant acceleration.

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force. A spring balance can be used to calculate the Force. The Newton is the SI unit of force.

According to Newton's second law of motion:

Applied force = mass × acceleration.

Hence, if an object of a constant mass experiences a constant net force, it will have a constant acceleration.

Learn more about force here:

https://brainly.com/question/26115859

#SPJ6

Answer:

The work done is 13680.8 J.

Explanation:

The work done can be calculated as follows:

[tex] W = F*d [/tex]              

Where:            

F: is the force                                                        

d: is the displacement = 40 m                                    

The force acting on the boulder is given by:

[tex] F = mgsin(\theta) [/tex]

Where:

m: is the mass = 100 kg

g: is the acceleration due to gravity = 10 m/s²

θ: is the angle = 20°      

Then, the work is:

[tex] W = mgsin(\theta)d = 100 kg*10 m/s^{2}*sin(20)*40 m = 13680.8 J [/tex]

Therefore, the work done is 13680.8 J.  

I hope it helps you!  

Answer:

d

Explanation:

Ya gon find the Kenitic Energy first

K=½mv²===> K=½×0.2×(0.2)²===> 0.1(0.04)===> 0.004

and now the replacement:

0.004=½×0.4V²====> v²=0.02===> V=0.14m/s

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

The spring constant of a spring is defined as the measurement of ratio of the force that is exerted on the spring to the displacement caused by it.

Here,

The mass of the block = m

Let F be the applied force on the spring and k be the spring constant.

When the mass attached to the spring is pulled to one side then released, it executes SHM.

Therefore we can write that, the applied force,

F = kx

Restoring force = -kx

According to Newton's law, we know that,

F = ma

So,

ma = -kx

Therefore, the acceleration,

a = (-k/m) x

For an SHM, the acceleration is given as,

a = -ω²x

Therefore, we can write that,

-ω²x = (-k/m) x

ω² = k/m

So, the time period of the spring,

T = 2[tex]\pi[/tex]/ω

T = 2[tex]\pi[/tex][√(m/k)]

Hence,

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

To learn more about spring constant, click:

https://brainly.com/question/20785296

#SPJ2

Answer:

2m

Explanation:

wavelength=speed/frequency

=340/170

=2m

Yes. Because it opposes the law of friction

I hope this helps.

Explanation:

Please mark me brainliest

In order to find out how long/wide/heavy/high/dense/deep/ massive/voluminous/reflective/opaque/ tansparent/warm/cold/hard/soft/ malleable/flexible/rigid/radioactive/old/ valuable/symmetrical/flat/regular/ irregular they are.

In a way that you can easily and conveniently describe to other people.

Answer:The SI system is based on the number 10 as well as multiples and products of 10. This makes it much easier to use, and so it has been the accepted system in scientific and technical applications. The English system is more complicated as relationships between units of the same quantity aren't uniform.

Explanation:

Answer:

The metric system is an internationally agreed decimal system of measurement while The International System of Units (SI) is the official system of measurement in almost every country in the world

Answer:

sup qwertyasdfghjk

Explanation:

Question: A commuter backs her car out of her garage with an acceleration of 1.4 m/s² (a) How long does it take her to reach a speed of 2.00 m/s

Answer:

1.43 s

Explanation:

Applying,

a = (v-u)/t........... Equation 1

Where a = acceleration, v = final velocity, u = initial velocity, t = time

make t the subject of the equation

t = (v-u)/a........... Equation 2

From the question,

Given: v = 2 m/s, u = 0m/s (from rest), a = 1.4 m/s²

Substitute into equation 2

t = (2-0)/1.4

t = 1.43 s

Answer:

The the linear speed (in m/s) of a point on the rim of this wheel at an instant=0.418 m/s

Explanation:

We are given that

Angular acceleration, [tex]\alpha=3.3 rad/s^2[/tex]

Diameter of the wheel, d=21 cm

Radius of wheel, [tex]r=\frac{d}{2}=\frac{21}{2}[/tex] cm

Radius of wheel, [tex]r=\frac{21\times 10^{-2}}{2} m[/tex]

1m=100 cm

Magnitude of total linear acceleration, a=[tex]1.7 m/s^2[/tex]

We have to find the linear speed  of a  at an instant when that point has a total linear acceleration with a magnitude of 1.7 m/s2.

Tangential acceleration,[tex]a_t=\alpha r[/tex]

[tex]a_t=3.3\times \frac{21\times 10^{-2}}{2}[/tex]

[tex]a_t=34.65\times 10^{-2}m/s^2[/tex]

Radial acceleration,[tex]a_r=\frac{v^2}{r}[/tex]

We know that

[tex]a=\sqrt{a^2_t+a^2_r}[/tex]

Using the formula

[tex]1.7=\sqrt{(34.65\times 10^{-2})^2+(\frac{v^2}{r})^2}[/tex]

Squaring on both sides

we get

[tex]2.89=1200.6225\times 10^{-4}+\frac{v^4}{r^2}[/tex]

[tex]\frac{v^4}{r^2}=2.89-1200.6225\times 10^{-4}[/tex]

[tex]v^4=r^2\times 2.7699[/tex]

[tex]v^4=(10.5\times 10^{-2})^2\times 2.7699[/tex]

[tex]v=((10.5\times 10^{-2})^2\times 2.7699)^{\frac{1}{4}}[/tex]

[tex]v=0.418 m/s[/tex]

Hence, the the linear speed (in m/s) of a point on the rim of this wheel at an instant=0.418 m/s

Answer:

dont be lose because the person who lose will win the match

Answer:

Use a lighter string of the same length, under the same tension.

Stretch the string tighter to increase the tension

Explanation:

The wave speed depends on propertices of the medium, not on how you generate the wave. For a string

Increasing the tension or decreasing the linear density (lighter string) will increase the wave speed.

A pulse will be sent down a horizontal extended thread if a person flicks the wrist. To raise the tension, pull the string tighter.

Pulse is the same thing as monitoring heartbeat. The pulse rate could also be measured via auscultation, which includes hearing to the heart rhythm using a stethoscope then counting it for one minute.

A pulse will be sent down a horizontal extended thread if a person holds one end of the rope and flicks their wrist.

To raise the tension, pull the string tighter.

Find out more information about pulse here:

https://brainly.com/question/14524756?referrer=searchResults

Answer:

Option (c)

Explanation:

1.The transformer core is assembled from steel sheets to:

(a) Reduced power loss due to eddy current

(b) Reduced power loss due to hysteresis

(c) Reduced power loss due to current flowing through the winding

(d) Reduce all types of power loss.

A transformer is a device which converts the low voltage into high and vice  versa.

There are two types of a transformer.

Step up: It is used to convert low voltage into high.

Step down It is used to convert high voltage into high.

It depends on the number of turns in primary and the secondary coil.

The core of the transformer is laminated and it is in the form of sheets.

By using such type of core, the power loss due to the windings is reduced.

option (c) .

Answer:

The value of x is 2.1 cm from the center of the coil.

Explanation:

Radius, R = 2.7 cm

Number of turns, N = 800

The magnetic field at the axis is half of the magnetic field at the center.

[tex]B_{axis}=\frac{B_{center}}{2}\\\\\frac{\mu o}{4\pi}\times \frac{2 \pi I N R^2}{\left (R^2 + x^2 \right )^{\frac{3}{2}}} = 0.5\frac{\mu o}{4\pi}\times\frac{2\pi N I}{R}\\\\\frac{R^2}{(R^2 + x^2)^\frac{3}{2}} = \frac{1}{2R}\\\\4R^6 = (R^2+x^2)^3\\\\1.6 R^2 = R^2 + x^2\\\\x^2 = 0.6 \times 2.7\times 2.7 \\\\x = 2.1 cm[/tex]

Answer:

1.5

x 1.0

1.50

x 0.5

075.00

answer: 75.00m

Explanation:

I hope this help

Answer:

d

Explanation:

The minimum energy configuration in electrostatics states that Charges always reside on the surface of a conductor. If anyhow they were inside, an electric field would exist inside and would act to move them to the surface,  

Therefore, the drawing that shows where the charges reside when they are in equilibrium is a hollowed-out "hole" in the interior of the circle, with positive signs surrounding the exterior edge. This means that the d part is the correct answer.

The complete question is as follows: At 700 K, [tex]CCl_{4}[/tex] decomposes to carbon and chlorine. The Kp for the decomposition is 0.76.

Find the starting pressure of [tex]CCl_{4}[/tex] at this temperature that will produce a total pressure of 1.1 atm at equilibrium.

Answer: The starting pressure of [tex]CCl_{4}[/tex] is 0.79 atm.

Explanation:

The equation for decomposition of [tex]CCl_{4}[/tex] is as follows.

[tex]CCl_{4}(g) \rightleftharpoons C(s) + 2Cl_{2}(g)[/tex]

Let us assume that initial concentration of [tex]CCl_{4}[/tex] is 'a'. Hence, the initial and equilibrium concentrations will be as follows.

                   [tex]CCl_{4}(g) \rightleftharpoons C(s) + 2Cl_{2}(g)[/tex]

Initial:            a                0          0

Equilibrium:  (a - x)          0          2x

Total pressure = (a - x) + 2x = a + x

As it is given that the total pressure is 1.1 atm.

So, a + x = 1.1

a = 1.1 - x

Now, expression for equilibrium constant for this equation is as follows.

[tex]K_{p} = \frac{P^{2}_{Cl_{2}}}{P_{CCl_{4}}}\\0.76 = \frac{(2x)^{2}}{(a - x)}\\0.76 = \frac{4x^{2}}{1.1 - x - x}\\0.76 = \frac{4x^{2}}{1.1 - 2x}\\x = 0.31 atm[/tex]

Hence, the value of 'a' is calculated as follows.

a + x = 1.1 atm

a = 1.1 atm - x

  = 1.1 atm - 0.31 atm

  = 0.79 atm

Thus, we can conclude that starting pressure of [tex]CCl_{4}[/tex] is 0.79 atm.

Answer:

Explanation:

Given:

volume of urine discharged, [tex]V=400~mL=0.4~L=4\times 10^{-4}~m^3[/tex]

time taken for the discharge, [tex]t=30~s[/tex]

diameter of cylindrical urethra, [tex]d=4\times10^{-3}~m[/tex]

length of cylindrical urethra, [tex]l=0.2~m[/tex]

density of urine, [tex]\rho=1000~kg/m^3[/tex]

a)

we have volume flow rate Q:

[tex]Q=A.v[/tex] & [tex]Q=\frac{V}{t}[/tex]

where:

[tex]A=[/tex] cross-sectional area of urethra

[tex]v=[/tex] velocity of flow

[tex]A.v=\frac{V}{t}[/tex]

[tex]\frac{\pi d^2}{4}\times v=\frac{4\times 10^{-4}}{30}[/tex]

[tex]v=\frac{4\times4\times 10^{-4}}{30\times \pi (4\times 10^{-3})^2}[/tex]

[tex]v=1.06~m/s[/tex]

b)

The pressure required when the fluid is released at the same height as the bladder and that the fluid is at rest in the bladder:

[tex]P=\rho.g.l[/tex]

[tex]P=1000\times 9.8\times 0.2[/tex]

[tex]P=1960~Pa[/tex]

Answer:

W =  343.2 J

Explanation:

Given that,

Mass of bale of hay = 26 kg

Horizontal force exerted = 88 N

Distance moved, d = 3.9 m

Work done, W = Fd

Put all the values,

W = 88 N × 3.9 m

= 343.2 J

So, the work done is 343.2 J.  

Explanation:

refractive index ,is the ratio of velocity of light in vacuum to the velocity of light a medium

Answer:

  T = 5.66 s

Explanation:

The system formed by the bar plus ball forms a physical pendulum

        w = [tex]\sqrt{mgd/I}[/tex]

the moment of inertia of a rod held at one end is

       I = [tex]\frac{1}{3}[/tex] m L²

we substitute

       w = [tex]\sqrt{\frac{d \ d}{ 3 L^2 } }[/tex]

in this case the turning distance and the length of the rod are equal

        d = L

        w = [tex]\sqrt{\frac{g}{3L} }[/tex]

angular velocity and period are related

       w = 2π / T

        2π / T = [tex]\sqrt{\frac{g}{3L} }[/tex]

        T = 2π [tex]\sqrt{3L/g}[/tex]

let's calculate

       T = 2π [tex]\sqrt{3 \ 2.65 / 9.8}[/tex]

       T = 5.66 s

By Newton's second law, the net force on the object is

∑ F = T - mg = - ma

where

• T = 25 N, the tension in the string

• m is the mass of the object

• g = 9.8 m/s², the acceleration due to gravity

• a = 2.0 m/s², the acceleration of the elevator-object system

Solve for m :

25 N - m (9.8 m/s²) = - m (2.0 m/s²)

==>   m = (25 N) / (9.8 m/s² - 2.0 m/s²) ≈ 3.2 kg

Answer:

If the mass of B is m and the temperature change is the same, the mass of B will be 2m.

Explanation:

Q = mcT

T = mc/Q

M = 4Q/2cT........... (1)

T = Q/mc

Plug this in equation 1.

M = 4Q/(2c × Q/mc)  = 4Q ÷ 2Q/m  = 4Q × m/2Q = 2m