The disk Erros matched are given as follows;
Lost Clusters refer to clusters on a hard disk drive that have been used but are not linked to any specific file.A Cross-linked file occurs when two different files claim ownership of the same cluster.Orphaned files are files that exist on a hard drive but are not connected to any directory in the index.A Bad sector is a portion of a hard disk that cannot be utilized due to physical damage or errors.What is Disk Error?A Disk Error is a malfunction or issue that occurs with a computer's hard disk drive.
It can be caused by a variety of factors, such as physical damage, corrupted data, or software problems. Disk errors can lead to data loss, slow performance, and system crashes. It is important to address disk errors promptly to prevent further damage to the system and data.
Learn more about Disk Error at:
https://brainly.com/question/29044609
#SPJ1
1.
(04.01 MC)
The main purpose of an intrusion detection system is to (5 points)
analyze network traffic
block malicious malware
prevent adware
filter and block web browsing activity
2.
(04.01 LC)
Intrusion detection system sensors are responsible for (5 points)
collecting data on network traffic
determining if intrusion detection has occurred
providing guidance on network breaches
determining if a security breach has occurred
3.
(04.01 LC)
Which logical component of an intrusion detection system is responsible for determining if an intrusion has occurred? (5 points)
Analyzers
Network interface
Sensors
User interface
4.
(04.02 LC)
Which of the following captures information from a single host, such as a firewall? (5 points)
Time stamp
NIDS
HIDS
Detector
5.
(04.02 MC)
Jax is a system administrator and has noticed an increase in false positive alerts from the network IDS. Why are false positives considered dangerous? (5 points)
They can blind Jax from noticing an actual attack.
They lack incident timestamps.
They are usually malware attacks.
They use up system resources.
6.
(04.03 LC)
Which of the following classifies critical data and identifies violations of policies defined by organizations? (5 points)
ATP
DLP
FTP
UTM
7.
(04.03 LC)
A _________ cyberattack occurs when a flaw or vulnerability is exploited before a patch can be created. (5 points)
virus
spyware
malware
zero-day
8.
(04.03 MC)
Hailey is an intern for a large technology company and was asked to find a list of IP addresses currently using the network. What type of scanning will Hailey use to do this? (5 points)
Port scanning
Vulnerability scanning
Network scanning
Web scanning
9.
(04.04 LC)
Which scanning tool can show the MAC address of the interface associated with each IP address the local host has recently communicated with? (5 points)
ipconfig
NMAP
ping
control
10.
(05.01 MC)
Which of the following is considered a limitation of virtualization? (5 points)
Fewer servers means greater impact from hardware failures.
It is challenging to test different security situations.
It is harder to alleviate hardware vulnerabilities.
Costs are higher because more devices are required.
11.
(05.01 LC)
What does a hacker use to run code on a virtual machine to allow an operating system to break out and interact directly with the hypervisor? (5 points)
IP targeting
VM escaping
Spoofing
Tailgating
12.
(05.01 MC)
Sampson received an instant message from someone claiming to work for her company's HR department. It said the company was updating their software and her account would be suspended unless she provided her personal login username and password. Which type of social engineering scam is this? (5 points)
Pretexting
Quid pro quo
Baiting
Phishing
13.
(05.01 MC)
_________ is the term for when someone harasses another person on the internet in an attempt to steal their personal information. (5 points)
Snooping
Eavesdropping
Cyberstalking
Phishing
Which of the following redirection operators appends a program's standard output to an existing file, without overwriting that file's original contents?
|
2>
&>
>
>>
The ">>" operator is the correct answer when it comes to the following redirection operators that append a program's standard output to an existing file without overwriting that file's original contents. Therefore the correct option is option E,
Output redirection is the process of directing the output of a command or script to a file instead of the screen. This could be useful for preserving output data for future reference or for processing by other programs, among other reasons.
The '>' operator: This redirection operator overwrites a file's current content with the command's output. The operator does not append to the end of a file but instead replaces it with the current command's output. In general, this redirection operator creates a new file if the specified file does not exist.
In other words, it can be used to capture all errors generated by a command so that they can be saved for later analysis.>> operator: This redirection operator is used to append output from a command to the end of a file rather than overwriting the entire contents of the file, as the '>' operator does.
This redirection operator appends to the file specified in the argument rather than replacing it.
For such more question on operator:
https://brainly.com/question/28968269
#SPJ11
Which of the following is a measurement of the maximum amount of data that can be transferred over a particular network segment?
Answer:
When you purchase bandwidth, a specification for the volume of data transferred over time, such as Mbps, gigabits, etc., is typically included. That is the speed in theory. Measure the actual speed.
Explanation:
Network bandwidth refers to the maximum rate at which data may be transmitted via a wired or wireless communications link in a specific amount of time. The amount of bits, kilobits, megabits, or gigabits that can be transmitted in a second is typically used to describe bandwidth.
if you happy for my answer please like and give me a crown :)
The average of three numbers, value1, value2, and value3, is given by (value1 + value2 + value3)/ 3.0. Write a program that reads double variables value1, value2, and value3 from the input, respectively, and computes averageOfThree using the formula. Then, outputs "Average is " followed by the value of averageOfThree to four digits after the decimal point. End with a newline.
Ex: If the input is 2.25 2.0 1.75, then the output is:
Average is 2.0000
Please help!
Answer:
#include <stdio.h>
int main(void) {
double value1, value2, value3;
double averageOfThree;
/* Read 3 double values */
scanf("%lf %lf %lf", &value1, &value2, &value3);
/* Compute the average */
averageOfThree = (value1 + value2 + value3) / 3.0;
/* Output the average */
printf("Average is %.4lf\n", averageOfThree);
return 0;
}
refer to the exhibit. pc-a is unable to receive an ipv6 address from the stateful dhcpv6 server. what is the problem?
The problem may be that the router interface connected to the switch has not been configured for IPv6 addressing. To resolve this issue, the following steps can be taken:
Configure the router interface connected to the switch with a link-local IPv6 address. This can be done using the command "ipv6 address fe80::1 link-local" on the interface in the router configuration.Configure the router interface connected to the switch with a global IPv6 address. This can be done using the command "ipv6 address <global IPv6 address> eui-64" on the interface in the router configuration.Configure the stateful DHCPv6 server with a pool of IPv6 addresses that can be assigned to clients. This can be done using the "ipv6 dhcp pool" command on the server.Enable DHCPv6 on the router interface connected to the switch. This can be done using the command "ipv6 dhcp server <dhcp pool name>" on the interface in the router configuration.Once these steps are completed, PC-A should be able to receive an IPv6 address from the stateful DHCPv6 server.
To learn more about router click the link below:
brainly.com/question/15851772
#SPJ4
Differentiate between ICT and ICTs
ICT refers to the field of information and communication technologies as a whole, while ICTs refer to the individual technologies within that field such as computers, smartphones, and the internet.
What is internet?
The internet is a global network of interconnected computers and servers that communicate with each other using standard communication protocols, allowing people to access and share information and communicate with each other across geographical distances.
ICT stands for Information and Communication Technology, which is a term used to describe the combination of technologies used to manage and communicate information.
ICTs, on the other hand, stands for Information and Communication Technologies, which refers to the specific devices, tools, and technologies used for communication and information management, such as computers, smartphones, the internet, and various software and applications.
In summary, ICT is a broader term that encompasses various technologies used for managing and communicating information, while ICTs are specific technologies that fall under the ICT umbrella.
To know more about software visit:
brainly.com/question/1022352
#SPJ1
you use the commond gmnome-sheel --replace at the command line and receive adn error message from the utility. what doest tshi indicate
The command line utility "gnome-shell --replace" is used to replace the existing user interface with a new user interface. Receiving an error message when running this command indicates that something is preventing the new user interface from loading.
Possible causes include: insufficient memory, incompatible graphic drivers, corrupted system files, or incorrect command syntax. It is important to investigate further to determine the exact cause of the error. If the cause of the error is not immediately apparent, troubleshooting techniques like running a system file check, updating or changing graphic drivers, and using the command line log files can help pinpoint the issue.
Additionally, if the error message includes specific technical information, it is often helpful to research that information to find additional resources. Finally, it is important to be sure to always use the correct syntax when running commands. Ultimately, an error message received when running the command "gnome-shell --replace" indicates that something is preventing the new user interface from loading. Investigating further is necessary to find the cause of the issue and resolve the problem.
For more such questions on interface
https://brainly.com/question/29541505
#SPJ11
true/false. Before OS X, the Hierarchical File System (HFS) was used, in which files are stored in directories (folders) that can be nested in other directories.
The given statement "Before OS X, the Hierarchical File System (HFS) was used, in which files are stored in directories (folders) that can be nested in other directories." is True because, before OS X, the Hierarchical File System (HFS) was used for organizing and storing data.
The Hierarchical File System (HFS) is a great way to store data, as it provides an organized, hierarchical structure to store and access files. This system allows users to create folders and subfolders within folders, and to place items within each folder. This makes it easier for users to locate files, as they can be found within a certain directory. The Hierarchical File System also allows for better data management, as users can create multiple folders to store different types of data.
Overall, the Hierarchical File System (HFS) is an efficient way to store and organize data. It is a great way to organize data in an organized, hierarchical structure, which makes it easy to locate files and access data quickly. It also provides better data management, as users can create multiple folders to store different types of data, and better security, as users can set access rights for each folder and its contents.
Know more about Hierarchical structure here :
https://brainly.com/question/30586274
#SPJ11
A company needs to send information about a new product to customers around the world. What protocol would you use to ensure reliable transmission and why?
Explanation:
Routing Information Protocol ( RIP ) is the most reliable one out there because it is a lot of
how can website be used to increase ingagement in a business
Answer:
A website can be a powerful tool for increasing engagement in a business in several ways.
- Providing useful and relevant content.
- Making each visitor's experience personalized.
- Encourage visitors to share your content on social media.
- Offering rewards to customers who engage with your business.
- Creating fun and interactive elements on the website.
Which of the following is one way that a company could enhance their security and privacy to protect their intellectual property?
Convert totalseconds to hours, minutes, and seconds, finding the maximum number of hours, then minutes, then seconds. Ex: If the input is 25274 , the output is: Hours: 7 Minutes: 1 Seconds: 14 Nole: An hour has 3600 seconds. A minule has 60 seconds.
totalSeconds have been converted to hours, minutes and seconds=7hr 1min 14sec
Code of the problem
int main()
{
int totalSeconds;
int numHours;
int numMinutes;
int numSeconds;
cin >> totalSeconds;
// total number of hours.
numHours = totalSeconds / 3600;
totalSeconds %= 3600;
// total number of minutes
numMinutes = totalSeconds / 60;
totalSeconds %= 60;
// total number of seconds
numSeconds = totalSeconds;
cout << "Hours: " << numHours << endl;
cout << "Minutes: " << numMinutes << endl;
cout << "Seconds: " << numSeconds << endl;
return 0;
}
To know more about Hour,click on the link :
https://brainly.com/question/13533620
#SPJ1
Answer:
numHours = totalSeconds/ 3600;
numMinutes = totalSeconds % 3600 / 60;
numSeconds = totalSeconds % 60;
Explanation:
We need to speak with senior executives in France who are involved in the selection (e.g. Purchasing) and / or implementation, follow up of digital transformation projects together with IT engineering consulting providers. We are looking for people who work at clients of companies such as Cap Gemini, Accenture, ATOS, Sopra Steria. NOT the IT engineering consulting companies themselves (we may want to interview those companies as well, but as a second step / not the focus for today). These clients are Societe Generale, Barclays, Santander
To speak with senior executives in France who are involved with the said projects, we suggest reaching out to Societe Generale, Barclays, and Santander directly.
Why is this so?These companies are clients of major IT engineering consulting firms such as Cap Gemini, Accenture, ATOS, and Sopra Steria.
It may also be helpful to contact industry associations and networking groups for IT professionals in France to gain access to additional senior executives in this field.
Hence, in the selection and implementation of digital transformation projects with IT engineering consulting providers, reach out to Societe Generale, Barclays, and Santander directly.
Read more about engineering consulting here:
https://brainly.com/question/29647386
#SPJ1
When removing curNode from a doubly-linked list with at least 2 elements, the list's tail may be assigned with _____
The prior node of the curNode, which would become the new tail node if cur Node, may be allocated to the list's tail when cur Node is removed from a doubly-linked list with at least two members.
What is necessary to remove a node from a doubly linked list?When removing a node from a doubly linked list: The prior node that has to be erased must be located. It is necessary to modify the previous node's next. It is necessary to release the memory of the node that has to be destroyed.
What is the time complexity of removing a node from the link list's end?Space complexity is O(1) and temporal complexity is O(N), where N is the total number of variables.
To know more about curNode visit:-
https://brainly.com/question/30883960
#SPJ1
6. Create a java application that will predict the size of a population of organisms. The user should be able to provide the starting number of organisms, their average daily population increase (as a percentage), and the number of days they will multiply. For example, a population might begin with two organisms, have an average daily increase of 50 percent, and will be allowed to multiply for seven days. The program should use a loop to display the size of the population for each day.
Input validation: Do not accept a number less than 2 for the starting size of the population. Do not accept a negative number for average daily population increase. Do not accept a number less than 1 for the number of days they will multiply.
Answer:
Explanation:
Here's a Java application that predicts the size of a population of organisms based on user inputs:
-------------------------------------------------------------------------------------------------------------
import java.util.Scanner;
public class PopulationPredictor {
public static void main(String[] args) {
Scanner scanner = new Scanner(System.in);
// Get user inputs
int startingSize;
do {
System.out.print("Enter the starting size of the population (must be at least 2): ");
startingSize = scanner.nextInt();
} while (startingSize < 2);
double dailyIncrease;
do {
System.out.print("Enter the average daily population increase as a percentage (must be non-negative): ");
dailyIncrease = scanner.nextDouble();
} while (dailyIncrease < 0);
int numDays;
do {
System.out.print("Enter the number of days the population will multiply (must be at least 1): ");
numDays = scanner.nextInt();
} while (numDays < 1);
// Calculate and display population size for each day
double populationSize = startingSize;
System.out.println("\nDay 1: " + populationSize);
for (int day = 2; day <= numDays; day++) {
populationSize += (populationSize * dailyIncrease) / 100;
System.out.println("Day " + day + ": " + populationSize);
}
}
}
-------------------------------------------------------------------------------------------------------------
The program first prompts the user to input the starting size of the population, the average daily population increase (as a percentage), and the number of days the population will multiply. It then uses a series of do-while loops to validate the user inputs according to the requirements stated in the prompt.
Once the user inputs are validated, the program calculates the size of the population for each day using a for loop. The population size for each day is calculated by multiplying the previous day's population size by the daily increase percentage (converted to a decimal), and adding the result to the previous day's population size.
The program then displays the population size for each day using println statements.
Write a program that prompts an SPC grad to enter her hourly pay rate and weekday (M-F) hours worked, and weekend hours worked last week. All three values might not be integers.
Understanding that "time and a half applies to weekday hours in excess of forty, and that
"double time" applies to any weekend hours, calculate and print the grad's regular pay, overtime pay, weekend pay, and total pay for the week. Outputs should display currency format with S signs, two decimals, and commas for thousands. Write a program using python
Below is a Python program that does what you've described:
python
# Prompt the user to enter pay rate and hours worked
pay_rate = float(input("Enter your hourly pay rate: "))
weekday_hours = float(input("Enter the number of weekday hours worked: "))
weekend_hours = float(input("Enter the number of weekend hours worked: "))
# Calculate regular pay
if weekday_hours <= 40:
regular_pay = pay_rate * weekday_hours
else:
regular_pay = pay_rate * 40
# Calculate overtime pay
if weekday_hours > 40:
overtime_hours = weekday_hours - 40
overtime_pay = pay_rate * 1.5 * overtime_hours
else:
overtime_pay = 0
# Calculate weekend pay
weekend_pay = pay_rate * 2 * weekend_hours
# Calculate total pay
total_pay = regular_pay + overtime_pay + weekend_pay
# Display results
print(f"Regular pay: S{regular_pay:,.2f}")
print(f"Overtime pay: S{overtime_pay:,.2f}")
print(f"Weekend pay: S{weekend_pay:,.2f}")
print(f"Total pay: S{total_pay:,.2f}")
What is the program about?The way that the code above works is that:
The program prompts the user to enter their pay rate and the number of weekday and weekend hours worked.The program calculates the regular pay, which is the pay rate times the number of weekday hours worked, unless the number of weekday hours worked is greater than 40, in which case only the first 40 hours are paid at the regular rate.Therefore, program calculates the overtime pay, which is time and a half (1.5 times the pay rate) for each weekday hour worked in excess of 40.
Learn more about python from
https://brainly.com/question/26497128
#SPJ1
fill in the blank. in packaged data models, all subtype/supertype relationships follow the___and___rules.
In packaged data models, all subtype/supertype relationships follow the Total specialization and overlap rules.
What is the data models?In packaged data models, all subtype/supertype relationships follow the completeness and disjointness rules.
The completeness rule requires that each supertype must have at least one subtype, and each entity instance must belong to exactly one subtype. The disjointness rule requires that the subtypes must be mutually exclusive, meaning that an entity instance can belong to only one subtype at a time.
Together, these rules ensure that every entity instance is properly classified within the hierarchy and that the model accurately reflects the real-world relationships between entities.
Read more about data models here:
https://brainly.com/question/13437423
#SPJ1
See full question below
In packaged data models, all subtype/supertype relationships follow the ________ and ________ rules.
partial specialization; disjoint
total specialization; disjoint
total specialization; overlap
partial specialization; overlap
Total specialization; overlap
write the pseudocode to represent the logic of a simple input and output program
Which of the following properly handles the side effects in this function? public float Average() { int[] values = getvaluesFromuser(); float total = ; for(int i = 0; i < values.length; i++) { total += values[i]; } return total / values.length; } This function is fine the way it is. There are no side effects. The math in the return statement needs to be fixed, if you don't cast the length to a float, you'll get integer division and a wrong value. Create a new function called Calculate Total that returns the sum of the items in the array. Replace the for loop with it. Change the function to be: public float Average(int[] values) Now values is known and no input is being done in the function
The solution to the given code block would be the fourth option. In order to handle the side effects of the function public float Average(), we need to change the function declaration and use a different method to calculate the total of the elements in the array.
Here, side effects refer to the alterations that occur in variables or objects outside of a method's scope as a result of the method's execution. There are no side effects in the function mentioned above, and the function returns the average of the input values. However, it can be improved to work better and more accurately.The correct method to handle side effects in this function is by modifying it to:public float Average(int[] values)Here, the Average method is being declared with an argument of integer array values, and this argument is being passed as input for the method. Now, in the method, the input is known, and no further input is taken. As a result, any alterations that occur to the integer array values will stay in the method's range and not be impacted by the caller methods.It is advised to use this method instead of the previous one for increased efficiency and better code management
for more such question on variables
https://brainly.com/question/28248724
#SPJ11
TRUE/FALSE. when you get and transform data from an external source, you must add it to a worksheet without any changes.
The statement "when you get and transform data from an external source, you must add it to a worksheet without any changes" is false.
When you import and transform data from an external source, you can add it to a worksheet with or without modifications.The following are the steps to add the transformed data to a worksheet.
Step 1: To transform the data, choose a data source and transform the data to fit your specifications in the Power Query Editor.
Step 2: Choose Close & Load from the Close & Load drop-down list in the Close & Load drop-down list in the Close & Load group on the Home tab on the Power Query Editor ribbon.
Step 3: The Load To page is where you can specify how the query results are displayed in the Excel workbook. Select Table, PivotTable Report, or PivotChart Report from the options.
Step 4: Select Existing worksheet and choose the location on the worksheet where the data should be placed from the options available.
Step 5: To finish the wizard and add the transformed data to the worksheet, click OK.This process saves a lot of time and helps to keep the data up to date with the source. Data should be updated on a regular basis to keep it current and to aid in making critical decisions based on accurate and current data.
For such more questions on worksheet :
brainly.com/question/8034674
#SPJ11
What is the difference between phishing and spoofing?
Answer:
Phishing and spoofing are two common types of online scams that are used to deceive people into giving away sensitive information. Although both terms are often used interchangeably, they refer to distinct types of attacks.
Phishing is a type of scam that involves the use of fraudulent emails, text messages, or websites that are designed to look like legitimate communications from reputable companies or individuals. The purpose of phishing is to trick people into providing personal information such as passwords, credit card numbers, or social security numbers. Phishing scams can be quite sophisticated, often using social engineering tactics to gain the trust of their victims.
Spoofing, on the other hand, is a broader term that refers to any act of impersonation or deception. In the context of online security, spoofing can refer to several types of attacks, including email spoofing, IP spoofing, and website spoofing. Email spoofing involves sending emails that appear to come from a trusted source, while IP spoofing involves changing the source IP address of a network packet to hide the true origin of the communication. Website spoofing involves creating fake websites that mimic legitimate sites in order to deceive users into giving away personal information.
Phishing is a specific type of spoofing that involves using fraudulent communications to trick people into giving away sensitive information. Spoofing, on the other hand, is a broader term that can refer to any act of impersonation or deception, including phishing.
Phishing is a type of cyber attack that involves sending fraudulent emails or messages to trick individuals into revealing sensitive information, such as passwords or credit card numbers.
What is cyber attacks?Any offensive maneuver that targets computer information systems, computer networks, infrastructures, personal computer devices, or smartphones is referred to as a cyberattack.
Both phishing and spoofing are types of cyber attacks used to steal sensitive information or money from unsuspecting victims. While they are similar in nature, they have some significant differences.
Phishing attacks frequently appear to be from legitimate sources, such as banks or social media platforms, and will frequently include a sense of urgency to compel people to act quickly.
Spoofing, on the other hand, is a type of cyber attack in which a malicious entity or individual impersonates a legitimate entity or individual in order to gain access to sensitive information or carry out malicious activities.
Thus, the main difference between the two is that phishing involves tricking individuals into revealing sensitive information, while spoofing involves impersonating a legitimate entity or individual in order to gain access to sensitive information or to carry out malicious activities.
For more details regarding cyberattacks, visit:
https://brainly.com/question/30093347
#SPJ5
The remove function in the following program _____.
>>> aList = [9, 2, 3.5, 2]
>>> aList.remove(2)
removes all occurences of a 2 from a list.
removes the first occurence of 2 from the list
removes the item with an index of 2 from the list
removes all data values from the list
Aiden wants to be able to tap or wave his phone at the point of sale terminal sensor to complete purchases. which tool should he use?
mobile transfer
Aiden should use mobile payments or mobile wallet tool to be able to tap or wave his phone at the point of sale terminal sensor to complete purchases.
A mobile wallet is a software application that stores sensitive personal and financial information, such as credit card numbers, electronic cash, and bank account information, on a mobile device such as a smartphone or tablet. They're also known as electronic wallets, mobile payments, or digital wallets.
There are several types of mobile wallets: Mobile payments or mobile wallets are used for tap-to-pay transactions and in-app purchases. A consumer adds a credit or debit card to their mobile wallet by entering the card details or taking a picture of the card. The mobile wallet then generates a unique code or token that is used instead of the card data for transactions.
For more such questions on terminal sensor
https://brainly.com/question/29427327
#SPJ11
which of the following is an example of the type of data that advertising networks automatically collect and share with businesses?
Answer:
The answer would "the cost of each ad you publish".
Explanation:
Please like my answer if you happy and give me a crown
** MUST BE PSEUDOCODE FOR CORAL**
I AM STUCK I GOT A 5/10 IM NOT SURE WHAT I AM MISSING IN MY CODE. PLEASE HELP
The provided code is suppose to be for a guessing game between two players. In this game, player 1 picks the number of guess attempts and a whole number value to be guessed. No indication is given if player 2 has gotten the value guessed correctly, as player 2 is expected to make all of the guesses and find out if they got it right at the end.
However the code provided does not function as expected. The expectation is that the function check_guess() will allow enable to get the value from player 1 and player 2 and return 1 if the value matches and 0 if it does match.
Player 1 will give a specific number of attempts to guess the number and the number being guessed can be any value as represented by the first two numbers entered into the input. The remaining inputs represent the guess of the values by player 2.
Answer:
There seems to be an error in the provided code. Specifically, the condition in the while loop is incorrect: while count >= guesses should be while count < guesses. This is causing the loop to never execute, so only the initial values of player1 and found are being checked, which is why the output is always "Player 2 Did Not Guess the Number".
Here's the corrected code in pseudo code:
Function check_guess(integer player1, integer player2) returns integer answer
if player1 == player2
answer = 1
else
answer = 0
Function Main() returns nothing
integer player1
integer player2
integer guesses
integer found
integer count
guesses = Get next input
player1 = Get next input
found = 0
count = 0
while count < guesses
player2 = Get next input
if found != 1
found = check_guess(player1, player2)
count = count + 1
if found == 1
Put "Player 2 Found the Number: " to output
Put player1 to output
else
Put "Player 2 Did Not Guess the Number: " to output
Put player1 to output
With this corrected code, the output for the provided inputs will be as follows:
Input: 10 5 1 2 3 4 5 6 7 8 9 10
Expected Output: Player 2 Found the Number: 5
Input: 7 -7 -1 -2 -3 -4 -5 -6 -7
Expected Output: Player 2 Found the Number: -7
Input: 8 0 -4 -3 -2 -1 0 1 2 3
Expected Output: Player 2 Found the Number: 0
Input: 9 1.5 2.5 3.5 4.5 1.5 5.5 6.5 7.5 8.5 9.5
Expected Output: Player 2 Found the Number: 1
Which of the following statements about the guarding against overestimating variable consideration under U.S. GAAP and IFRS is true?
Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable" that a significant reversal of revenue recognized to date will not occur.
Under U.S. GAAP, sellers only include an estimate of variable consideration to extent it is "probable" that a significant reversal of revenue recognized to date will not occur.
U.S. GAAP and IFRS convey the same likelihood with regards to the uncertainty associated with the variable consideration.
The statement is true because regarding U.S. GAAP and IFRS when it comes to guarding against overestimating variable consideration is that "Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable".
IFRS requires that estimates of variable consideration be included only when the likelihood of significant reversal of revenue is “probable”, and this is a stricter standard than the “reasonably possible” standard under U.S. GAAP.
Under U.S. GAAP, estimates of variable consideration are only included when the amount of the estimate is both “reasonably possible” and “probable”. Therefore, U.S. GAAP and IFRS do not convey the same likelihood when it comes to the uncertainty associated with the variable consideration.
Under IFRS, the seller must be more certain that there will not be a significant reversal of revenue before including the estimate, while under U.S. GAAP, the seller only needs to be reasonably certain that there is a possibility of a significant reversal.
For more such questions on revenue
https://brainly.com/question/13440727
#SPJ11
Write a program that inputs the value 437 using each of the scanf integer conversion specifiers. Print each input value using all the integer conversion specifiers.
Which of the following foods will take longer to digest?
a. Bread
b. Candy
c. Apple
d. Milk
Answer:
bread...
Explanation:
because of fibre
Put the steps in order to produce the output shown below. Assume the indenting will be correct in the program.
JDoe
1. Line 1
print (answer)
2. Line 2
return strFirst[0] + strLast
3. Line 3
def username (strFirst, strLast):
4. Line 4
answer = username ('Joann', 'Doe')
Answer:
1. Line 3
def username (strFirst, strLast):
2. Line 2
return strFirst[0] + strLast
3. Line 1
answer = username ('Joann', 'Do')
4. Line 4
print (answer)
Output: JDo
FILL IN THE BLANK The Connected Computer Click the Statement on the left, then click the Term on the right that completes the statement. Statement _____ does not allow changing service or bandwidth because a Web site allows illegal media sharing. Buying and selling products via electronic channels such as the Internet is called _____ . You use ____ when your telephone calls travel over the Internet instead of using traditional phone systems. With _____, you can access storage and applications over the Internet. The Internet connects millions of computers connected through millions of ____ worldwide.
Bandwidth throttling does not allow changing service or bandwidth because a Web site allows illegal media sharing. Buying and selling products via electronic channels such as the Internet is called e-commerce. You use VoIP when your telephone calls travel over the Internet instead of using traditional phone systems. With Cloud Computing, you can access storage and applications over the Internet. The Internet connects millions of computers connected through millions of networks worldwide.
The Internet connects millions of computers connected through millions of ____ worldwide. The statement "ISPs" does not allow changing service or bandwidth because a website allows illegal media sharing. The Internet connects millions of computers connected through millions of "networks" worldwide.
A server is a vital part of any network since it enables users to connect and share information while ensuring the security and reliability of the system.
The server controls and manages access to resources on the network, such as printers, files, applications, and databases, and performs various network services, including email, backup, and security.
A server is used to authenticate users to the network, enabling them to access the resources they require while keeping others out. It keeps a record of the user's account information, such as passwords and access rights.
For such more question on Internet:
https://brainly.com/question/2780939
#SPJ11