CE Predict/Explain 16.1
The temperature inside a freezer is 22 ∘F and the temperature outside is 42 ∘F. The temperature difference is 20 F∘.
Part A
Is the temperature difference ΔT in degrees Celsius greater than, less than, or equal to 20 C∘? Is the temperature difference in degrees Celsius greater than, less than, or equal to 20 ? a.Equal to
b.Greater than
c.Less than
Part B
Choose the best explanation from among the following:
a.The temperature difference is less than 20 C∘ because ΔTC=59(20∘F)=11∘C
b. The temperature difference is equal to 20 C∘ because temperature differences are the same in all temperature scales.

Answers

Answer 1

a: The temperature difference in degrees Celsius is less than 20∘C. The answer is (c) Less than.

b. The explanation (a) is the correct one. Temperature differences are not the same in all temperature scales, and converting from one scale to another requires a specific formula.

Part A:

To convert from Fahrenheit (∘F) to Celsius (∘C), we use the formula:

ΔTC=59(ΔTF)

where ΔTC is the temperature difference in degrees Celsius and ΔTF is the temperature difference in degrees Fahrenheit.

Using this formula, we have:

ΔTC = 59(20) ≈ 11.11∘C

Part B:

The formula for converting temperature differences from Fahrenheit to Celsius is ΔTC=59(ΔTF), as used in Part A.

For more question on temperature click on

https://brainly.com/question/26866637

#SPJ11

Answer 2

The temperature difference in degrees Celsius is less than 20 C∘. The answer is (c) Less than.

The temperature difference is less than 20 C∘ because ΔTC=59(20∘F)=11∘C.

Part A: The temperature difference in degrees Celsius can be found using the formula ΔTC=59(ΔTF), where ΔTF is the temperature difference in degrees Fahrenheit and ΔTC is the temperature difference in degrees Celsius. Substituting the given values, we get ΔTC=59(20∘F)= -6.7∘C (rounded to one decimal place). Therefore, the temperature difference in degrees Celsius is less than 20 C∘. The answer is (c) Less than.

Part B: The explanation (a) is correct. The conversion factor 59 is used to convert temperature differences in degrees Fahrenheit to degrees Celsius. This is because the size of one degree Fahrenheit is 1/59th of one degree Celsius. Therefore, the temperature difference in degrees Celsius is smaller than the temperature difference in degrees Fahrenheit. The answer is (a) The temperature difference is less than 20 C∘ because ΔTC=59(20∘F)=11∘C.

Learn more about conversion factor here:

https://brainly.com/question/28366871

#SPJ11


Related Questions

Which of the following options is correct?
Fats contain more energy per gram than carbohydrates or proteins because
A) fat molecules contain a lower percentage of oxygen atoms.
B) fat molecules contain a lower percentage of hydrogen atoms.
C) fat molecules contain a lower percentage of carbon atoms.
D) fat molecules contain a higher percentage of adipose atoms.

Answers

The correct option is B) fat molecules contain a lower percentage of hydrogen atoms. Fat molecules, also known as triglycerides, are composed of three fatty acid chains attached to a glycerol backbone. These fatty acid chains are made up of long chains of carbon and hydrogen atoms, with some oxygen atoms as well.

The term "adipose atoms" does not make sense as adipose refers to fat tissue, not a specific element or atom.The percentage of hydrogen atoms in a fat molecule varies depending on the type of fatty acid chain present. Saturated fatty acids, which have no double bonds between their carbon atoms, contain the maximum number of hydrogen atoms possible and therefore have a higher percentage of hydrogen atoms.

Unsaturated fatty acids, on the other hand, have one or more double bonds between their carbon atoms, which reduces the number of hydrogen atoms and lowers the percentage of hydrogen in the molecule.

Overall, fat molecules contain more carbon and hydrogen atoms than oxygen atoms, which is why they are classified as lipids. They serve as a storage form of energy in the body and also play important roles in cell membrane structure and function, hormone production, and insulation .The correct option is B

For more such questions on molecules

https://brainly.com/question/24191825

#SPJ11

Fat molecules contain a lower percentage of oxygen atoms. The correct option is A)

This is because carbohydrates and proteins contain more oxygen atoms in their molecules compared to fats, which have more carbon and hydrogen atoms. The presence of more oxygen atoms in carbohydrates and proteins results in lower energy density compared to fats.
A) Fat molecules contain a lower percentage of oxygen atoms.
Fats contain more energy per gram than carbohydrates or proteins because fat molecules have a lower percentage of oxygen atoms, which leads to a higher proportion of carbon and hydrogen atoms. These carbon-hydrogen bonds store more energy than the bonds found in carbohydrates or proteins.

Visit here to learn more about Fat molecules:

brainly.com/question/12269543

#SPJ11

A mass of gasoline occupies 70. 01 at 20°C. What is the volume at 35°C?​

Answers

The volume at 35°C is approximately 69.86 liters

The solution to the problem: "A mass of gasoline occupies 70.01 at 20°C.  the volume at 35°C" is given below:Given,M1= 70.01; T1 = 20°C; T2 = 35°CVolume is given by the formula, V = \frac{m}{ρ}

Volume is directly proportional to mass when density is constant. When the mass of the substance is constant, the volume is proportional to the density. As a result, the formula for calculating density is ρ= \frac{m}{V}.Using the formula of density, let's find out the volume of the gasoline.ρ1= m/V1ρ2= m/V2We can also write, ρ1V1= ρ2V2Now let's apply the values in the above formula;ρ1= m/V1ρ2= m/V2

ρ1V1= \frac{ρ2V2M1}{ V1}  = ρ1 (1+ α (T2 - T1)) V1V2 = V1 / (1+ α (T2 - T1)) Given, M1 = 70.01; T1 = 20°C; T2 = 35°C

Therefore, V2 = \frac{V1 }{(1+ α (T2 - T1))V2}=\frac{ 70.01}{(1 + 0.00095 * 15) } [α for gasoline is 0.00095 per degree Celsius]V2 = 69.86 liters (approx)

Hence, the volume at 35°C is approximately 69.86 liters.

learn more about density Refer: https://brainly.com/question/32242821

#SPJ11

Determine the fraction of total holes still in the acceptor states in silicon for N. = 1016 cm-at (a) T = 250 K and (b) T = 200 K

Answers

The fraction of total holes still in the acceptor states is roughly 0.5 for both temperatures.

However, this is a simplified estimation, and more accurate results may require further calculations considering the specific energy levels and silicon properties. At T = 250 K, the fraction of total holes still in the acceptor states in silicon for N. = 1016 cm-at is 0.0000000000005. At T = 200 K, the fraction is 0.00000000000097.
To determine the fraction of total holes still in the acceptor states in silicon for N_A = 10^16 cm^-3 at given temperatures, we can use the Fermi-Dirac probability function:
P(E) = 1 / (1 + exp((E - E_F) / (k * T)))
At thermal equilibrium, the Fermi energy level, E_F, can be assumed to be approximately equal to the energy level of the acceptor state, E_A. Therefore, the fraction of total holes still in the acceptor states can be calculated as follows:
(a) T = 250 K:
P(E_A) = 1 / (1 + exp((E_A - E_F) / (k * 250)))
(b) T = 200 K:
P(E_A) = 1 / (1 + exp((E_A - E_F) / (k * 200)))

To know more about temperatures visit :-

https://brainly.com/question/4160783

#SPJ11

A particle moves along a line so that its position at any time t ≥ 0 is given by the function s(t) =−t3+7t2−14t+8 where s is measured in meters and t is measured in seconds.(a)Find the instantaneous velocity at any time t?(b) Find the acceleration of the particle at any time t?

Answers

To find the instantaneous velocity and acceleration of the particle, we need to differentiate the position function, s(t), with respect to time, t.

(a)The instantaneous velocity of the particle at any time t is given by v(t) = -3t^2 + 14t - 14. Instantaneous velocity (v):

To find the instantaneous velocity, we differentiate the position function, s(t), with respect to time:

v(t) = s'(t)

Differentiating the function s(t):

s(t) = -t^3 + 7t^2 - 14t + 8

Differentiating each term with respect to t:

s'(t) = -3t^2 + 14t - 14

(b) The acceleration of the particle at any time t is given by a(t) = -6t + 14.

Acceleration (a):

To find the acceleration, we differentiate the velocity function, v(t), with respect to time:

a(t) = v'(t)

Differentiating the function v(t):

v(t) = -3t^2 + 14t - 14

Differentiating each term with respect to t:

v'(t) = -6t + 14

To know more about instantaneous velocity refer here

https://brainly.com/question/30782692#

#SPJ11

2'

1. List out names of material in Table as you test them

152

PHYSICS ASSIGNMENT:- a. Reflect all or most of the light bounces back (Transparent medium) b. Partially reflect light( Translucent medium) C. Absorbe NO light bounces back.

Answers

The behavior of light reflection and transmission can vary depending on the specific characteristics and properties of the materials.

A list of materials based on the description

a. Reflect all or most of the light bounces back (Transparent medium):

Glass

Clear plastic

Air (in certain conditions)

b. Partially reflect light (Translucent medium):

Frosted glass

Wax paper

Tinted glass

Some types of plastics

c. Absorb no light bounces back (Opaque medium):

Wood

Metal

Cardboard

Brick

Rubber

Most fabrics

Please note that this is a general list, and the behavior of light reflection and transmission can vary depending on the specific characteristics and properties of the materials.

To know more about light reflection here

https://brainly.com/question/12271361

#SPJ4

suppose we replace the mercury lamp with a light source emitting red light. will photoelectrons be emitted ? explain why or why not ?

Answers

In most cases, replacing the mercury lamp with a red light source does not cause photoelectron emission.

The emission of photoelectrons depends on the energy of the incident photons and the activity of the material. The work function is the minimum energy required to remove electrons from the surface of the object. In the case of a mercury lamp, it usually emits ultraviolet (UV) light, which contains more energy photons. Photoelectrons can be emitted if the energy of the UV photons is greater than or equal to the work function of the material. However, when a red emitting light is used instead of a mercury lamp, red photons generally have lower energy than UV photons. Red light has a long wavelength and low energy. To emit a photoelectron, the energy of the red photon must be greater than the active material. If the energy of the red photon is lower than the function, the electron cannot receive enough energy to overcome the negative function and is released as a photoelectron. The signal is not strong enough to cause photoemission on most devices. The activity of the material is usually higher than the energy carried by the red photons. Therefore, in most cases, replacing the mercury lamp with a red light source does not cause photoelectron emission. However, it should be noted that in some cases or in some experiments, the energy of the red photon is sufficient to cause photoemission. These may have exceptions and depend on equipment specifications and test setup.

For more such questions on photoelectrons,

https://brainly.com/question/31966889

#SPJ11

gilbert and sanger discovered two approaches for dna sequencing barttleby

Answers

Gilbert and Sanger developed Gilbert sequencing and Sanger sequencing, respectively. Gilbert sequencing uses chain termination, while Sanger sequencing employs dideoxy chain termination. Sanger sequencing is preferred due to its higher accuracy, efficiency, and wide acceptance.

Ans 1. Gilbert and Sanger discovered two approaches for DNA sequencing, which are the Maxam-Gilbert method and the Sanger method. The Maxam-Gilbert method uses chemical reactions to cleave DNA at specific bases, while the Sanger method uses DNA polymerase to synthesize a DNA strand and fluorescent dideoxy nucleotides to terminate chain elongation. The Sanger method is generally considered superior because it is more reliable and produces longer read lengths.

Ans 2. Shotgun sequencing is a method for sequencing DNA in which the genome is randomly fragmented into small pieces, which are then sequenced and assembled using computer algorithms. This method allows for the sequencing of large genomes in a more efficient and cost-effective manner.

Ans 3. Organisms with completely sequenced genomes:

a) Plant: Arabidopsis thaliana (Thale cress)

b) Animal: Homo sapiens (Human)

c) Fungi: Saccharomyces cerevisiae (Baker's yeast)

d) Protista: Plasmodium falciparum (Malaria parasite)

e) Bacteria: Escherichia coli (E. coli)

To know more about the Gilbert and Sanger refer here :

https://brainly.com/question/30590319#

#SPJ11

Complete answer :

1. Gilbert and Sanger discovered two approaches for DNA sequencing, and they both got the Nobel Prize. Describe the differences between these two methodologies. Why one is superior over the other?

2. What is shotgun sequencing?

3. Write the name of one organism from plant, animal, fungi, Protista, and bacteria whose genome has been completely sequenced.

an initially uncharged electroscope consists of two thin, 50 cm long conducting wires attached to a cap, with a 25 g conducting sphere attached to the other end of each wire. when a charged rod is brought close to but not touching the cap, as shown above, the spheres separate a distance of 30 cm. what can be determined about the induced charge on each sphere from this information?

Answers

Each sphere has a negative charge of [tex]4.48 x 10^-9 C[/tex] induced on it by the charged rod.

Based on the given information, we can conclude that the initially uncharged electroscope has become charged through the process of induction. The charged rod, when brought close to the cap, induces a separation of charges in the electroscope. The electrons in the conducting wires are repelled by the negative charge on the rod, causing them to move towards the spheres. This results in a separation of charges, with the spheres becoming negatively charged and the wires becoming positively charged.

The magnitude of the induced charge on each sphere can be determined using Coulomb's law. Since the spheres are identical in size and shape, they will have the same charge magnitude. The equation for Coulomb's law is:

[tex]F = k(q1q2 / r^2)[/tex]

where F is the electrostatic force, k is Coulomb's constant ([tex]9 x 10^9 Nm^2/C^2[/tex]), q1 and q2 are the magnitudes of the charges on the two spheres, and r is the distance between them (0.3 m).

Since the spheres are separated by 30 cm, or 0.3 m, we can use this distance in Coulomb's law to solve for the magnitude of the charge on each sphere. Rearranging the equation, we get:

[tex]q1q2 = Fr^2 / k[/tex]

Plugging in the given values, we get:

[tex]q1q2 = (9 x 10^9 Nm^2/C^2) x (25 g) x (9.8 m/s^2) x (0.3 m)^2 / 2 = 20.1 x 10^-9 C^2[/tex]

Since the spheres have the same charge magnitude, we can take the square root of this value to find the magnitude of the charge on each sphere:

q1 = q2 = sqrt(20.1 x 10^-9) = 4.48 x 10^-9 C


Learn more about charged rod here :-

https://brainly.com/question/30696850

#SPJ11

astronomers believe that the many supernova explosions that happened in the milky way galaxy could have played a role in the evolution of life over billions of years. how would they have influenced the development of life on earth?

Answers

Supernova explosions have played a significant role in the evolution of life on Earth by providing essential elements, promoting genetic diversity, and shaping the planet's climate and habitability.

Astronomers believe that supernova explosions in the Milky Way galaxy have played a role in the evolution of life on Earth over billions of years. Supernovae are the explosive deaths of massive stars that release tremendous amounts of energy and materials into space. These events have influenced the development of life on our planet in several ways.

First, supernovae create and distribute elements essential for life, such as carbon, nitrogen, and oxygen. The explosion disperses these elements into the interstellar medium, where they eventually become part of new star systems and planets, including Earth. This process enriches the composition of our planet, providing the necessary building blocks for the formation of life.

Second, the radiation from supernovae can induce genetic mutations in living organisms. While many of these mutations may be harmful or neutral, some can lead to evolutionary adaptations that increase an organism's chances of survival. This process promotes biodiversity and contributes to the complexity and diversity of life on Earth.

Lastly, supernovae can impact the climate and the habitability of our planet. The energy from nearby supernovae may temporarily strip away Earth's ozone layer, resulting in increased levels of harmful ultraviolet radiation. This could lead to mass extinctions, opening up new ecological niches for life to evolve and adapt.

Learn more about Supernova  here:-

https://brainly.com/question/31369072

#SPJ11

for the polynomial a(s)=s 5 5s4 11s3 23s2 28s 12 determine how many poles are on the r.h.p, l.h.p. and jω axis

Answers

For the polynomial a(s), there are 0 poles in the R.H.P, 5 poles in the L.H.P, and 0 poles on the jω axis.

The given polynomial is a(s) = s^5 + 5s^4 + 11s^3 + 23s^2 + 28s + 12. To determine the number of poles on the right-half plane (R.H.P), left-half plane (L.H.P), and jω axis, we need to find the roots of the polynomial, which represent the poles of the system.
The Routh-Hurwitz criterion can be used to determine the number of poles in the R.H.P without explicitly finding the roots. Using the Routh-Hurwitz criterion, we form a Routh array. For this polynomial, the array is as follows:
s^5: |  1   11   28  |
s^4: |  5   23   12  |
s^3: |  3.4  8.2     |
s^2: |  23   12      |
s^1: |  20.45        |
s^0: |  12           |
There are no sign changes in the first column, so there are no poles in the R.H.P. To find the total number of poles on the L.H.P, subtract the number of poles in the R.H.P (which is 0) from the polynomial's order (5 in this case), which gives us 5 poles on the L.H.P.
As for the poles on the jω axis, this polynomial has real coefficients, so any purely imaginary roots will occur in conjugate pairs. Since we already know that there are 5 poles in the L.H.P and none in the R.H.P, there can't be any poles on the jω axis.
To know more about poles visit:

https://brainly.com/question/14929963

#SPJ11

Sr-90, a B-emitter found in radioactive fallout, has a half-life of 28.1 years. What is the percentage of Sr-90 left in an artifact after 83.2 years? Insert your answer rounded to 3 significant digits.

Answers

The percentage of Sr-90 left in an artifact after 83.2 years is approximately 14.2%.

How much Sr-90 remains in the artifact after 83.2 years?

Radioactive decay is a process where unstable atomic nuclei undergo spontaneous transformations, emitting radiation.

The decay rate is characterized by a half-life, the time for half of the radioactive substance to decay.

In the case of Sr-90 with a half-life of 28.1 years, we can calculate the remaining percentage using the formula:

Remaining percentage = [tex](1/2)^(^t ^/ ^h^a^l^f^-^l^i^f^e^) * 100[/tex]. Substituting the values, we find [tex](1/2)^(^8^3^.^2 ^/ ^2^8^.^1^) * 100 = 14.2%.[/tex]

This means that after 83.2 years, only approximately 14.2% of the initial amount of Sr-90 remains in the artifact.

The rest has undergone radioactive decay, transforming into other elements or isotopes. Understanding radioactive decay is crucial in fields such as nuclear physics, environmental science, and radiology.

Learn more about Radioactive decay

brainly.com/question/31201270

#SPJ11

A duck is floating on a lake with 28 % of its volume beneath the water. What is the average density of the duck?

Answers

The average density of the duck is determined to be 0.28 times the density of water.

What is the ratio between the duck's density and the density of water?

To determine the average density of the duck, we can use the principle of buoyancy. When an object floats, it displaces a volume of liquid equal to its own weight. Therefore, the weight of the duck is balanced by the weight of the liquid it displaces.

Let's assume the total volume of the duck is V. Since 28% of its volume is beneath the water, the volume of water displaced by the duck is 0.28V.

The density of water is generally close to 1 g/cm³ or 1000 kg/m³. We can use this value to calculate the average density of the duck.

The weight of the water displaced by the duck is given by:

Weight of water = Density of water × Volume of water = 1000 kg/m³ × 0.28V

Since the weight of the duck is balanced by the weight of the water, the average density of the duck can be calculated as:

Average density of the duck = Weight of the duck / Volume of the duck

Since the weight of the duck is equal to the weight of the water displaced, we have:

Average density of the duck = Weight of water / Volume of the duck = (1000 kg/m³ × 0.28V) / V = 280 kg/m³

Therefore, the average density of the duck is 280 kg/m³.

Learn more about density

brainly.com/question/29775886

#SPJ11

A pair of parallel conducting rails that are separated by a distance d=3 m lies at a right angle to a uniform magnetic field B=0.5 T directed into the paper. resistor R=2.5Ω is connected across the rails. A conducting bar is moving to the right at speed v=5 m/s across the rails. What is the direction and magnitude of the current in the resistor?

Answers

The current in the resistor has a magnitude of 3 A and flows from the top rail to the bottom rail.

To determine the direction and magnitude of the current in the resistor, we need to use the concept of electromagnetic induction. .
To calculate the magnitude of the induced emf (electromotive force), we can use Faraday's law: emf = -d(ΦB)/dt
where ΦB is the magnetic flux through the circuit and dt is the time interval during which the flux changes. In this case, the magnetic field is uniform, and the area of the circuit is constant.

So we can simplify the equation to: emf = -BA d/dt
where A is the area of the circuit (which is the product of the length of the rails and the distance between them) and d is the distance the bar moves across the rails during the time interval dt.

emf = -0.5 T * (3 m * 2.5 Ω) * (5 m/s)/(3 m) = -2.5
Therefore, the direction of the current in the resistor is from the negative terminal to the positive terminal, and its magnitude is 1 A.
EMF = B * d * v = 0.5 T * 3 m * 5 m/s = 7.5 V
I = EMF / R = 7.5 V / 2.5 Ω = 3 A

To know more about current visit :-

https://brainly.com/question/3358293

#SPJ11

how to calculate conformers from free energy differences

Answers

Calculating conformers from free energy differences involves understanding the relationship between the energy of a molecule and its different conformations. Conformers are different arrangements of atoms in a molecule that can be interconverted without breaking any covalent bonds.

These different conformers have different energy levels, which can be calculated using computational methods. To calculate the free energy differences between conformers, one needs to use thermodynamic equations that relate the energy of the molecule to its entropy and temperature. These equations can then be used to determine the relative stability of each conformer. Once the free energy differences between conformers have been calculated, one can use this information to predict which conformer is most likely to be present in a given environment. This is important in many areas of chemistry, such as drug design, where the effectiveness of a drug can depend on the specific conformer of the molecule.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

Which friction requires the least amount of force to overcome fluid friction or sliding friction?

Answers

Fluid friction requires less force to overcome than sliding friction. Fluid friction is the resistance to an object's motion through a fluid, such as air or water.

This type of friction depends on the shape and size of the object, as well as the properties of the fluid, such as viscosity. In general,

with streamlined shapes experience less fluid friction than those with irregular shapes.



Sliding friction, on the other hand, is the force that opposes the motion of two surfaces sliding against each other. This type of friction is caused by the irregularities on the surfaces that come into contact,

which resist the motion of one surface over the other. Sliding friction is affected by the materials of the surfaces and the force pushing the surfaces together.



In terms of the force required to overcome these types of friction, fluid friction requires less force than sliding friction. This is because fluid friction depends on the object's shape and size,

and the properties of the fluid, while sliding friction is determined by the force pushing the surfaces together and the materials of the surfaces.

Therefore, if you were trying to move an object, it would require less force to overcome fluid friction than sliding friction.

To know more about  sliding friction refer here

https://brainly.com/question/11808898#

#SPJ11

a point charge is located exactly at the center of an imaginary gaussian surface in the shape of a cube

Answers

The electric field due to the point charge located at the center of the cube can be calculated using Gauss's law and is given by E = charge / (ε0 x A).

If a point charge is located exactly at the center of an imaginary Gaussian surface in the shape of a cube, then the electric field due to the charge can be calculated using Gauss's law. According to Gauss's law, the flux of the electric field through any closed surface is equal to the charge enclosed by the surface divided by the permittivity of free space. In this case, since the charge is located at the center of the cube, the electric field will be uniform and directed towards the faces of the cube. Moreover, since the cube is symmetric, the electric field will have the same magnitude on all faces of the cube.
To calculate the electric field using Gauss's law, we need to find the net charge enclosed by the cube. Since the charge is located at the center of the cube, the net charge enclosed by the cube will be equal to the charge itself. Hence, we can write
flux = charge / ε0
where ε0 is the permittivity of free space. The flux through each face of the cube will be equal since the electric field is uniform and directed towards each face. Hence, we can write
flux = E x A
where E is the magnitude of the electric field and A is the area of each face of the cube.
Equating the above two equations, we get
E x A = charge / ε0
Solving for E, we get
E = charge / (ε0 x A)
Hence, the electric field due to the point charge located at the center of the cube can be calculated using Gauss's law and is given by E = charge / (ε0 x A).

To know more about Electric Field visit:
https://brainly.com/question/15800304
#SPJ11

How do plants recycle hydrogen during cellular respiration?
a.) the hydrogen in glucose is recycled as water.
b.) the hydrogen in glucose is recycled as hydrogen gas.
c.) the hydrogen in hydrogen gas is recycled as glucose.
d.) the hydrogen in water is recycled as glucose.
i need this answer in 5 minutes!

Answers

Plants recycle hydrogen in cellular respiration through a process that involves breaking down glucose and other organic compounds to release energy, carbon dioxide, and water. During this process, the hydrogen in glucose is recycled as water (option a) and released into the environment.

In cellular respiration, plants consume glucose and oxygen to generate energy. The glucose is broken down in a process known as glycolysis, which produces two molecules of pyruvate and hydrogen ions. These hydrogen ions are then transported to the mitochondria, where they are used to generate ATP. During this process, the hydrogen ions combine with oxygen to form water, which is then released into the environment as a byproduct of cellular respiration.The recycling of hydrogen in cellular respiration is essential for plant survival as it allows them to maintain a balance of resources in their environment. The water produced by the recycling of hydrogen is also critical for plant growth and the maintenance of the ecosystem as a whole.In conclusion, plants recycle hydrogen during cellular respiration by breaking down glucose and other organic compounds to release energy, carbon dioxide, and water. The hydrogen in glucose is recycled as water, which is released into the environment as a byproduct of the process. This recycling process is vital for plant survival and the maintenance of the ecosystem.

learn more about cellular respiration Refer: https://brainly.com/question/13721588

#SPJ11

what pressure does a 125 lbs woman in high heels ( .45 radius) exert on the floor if she’s standing on one foot?

Answers

The pressure that a 125 lbs woman in high heels with a radius of 0.45 exerts on the floor if she's standing on one foot is approximately 4.3 x 10^6 Pa.

To calculate the pressure that a 125 lbs woman in high heels with a radius of 0.45 exerts on the floor, we need to use the formula:

Pressure = Force / Area

First, let's calculate the force that the woman exerts on the floor:

Force = Mass x Gravity

where Mass = 125 lbs and Gravity = 9.8 m/s^2 (acceleration due to gravity)

We need to convert the mass to kilograms and the force to Newtons, so:

Mass = 125 lbs x 0.453592 kg/lbs = 56.699 kg

Force = Mass x Gravity = 56.699 kg x 9.8 m/s^2 = 556.11 N

Now we need to calculate the area of the heel:

Area = π x radius^2

where radius = 0.45 inches = 0.01143 meters (converting to meters)

Area = π x (0.01143 m)^2 = 1.29 x 10^-4 m^2

Finally, we can calculate the pressure:

Pressure = Force / Area = 556.11 N / 1.29 x 10^-4 m^2 = 4.3 x 10^6 Pa

Therefore, the pressure that a 125 lbs woman in high heels with a radius of 0.45 exerts on the floor if she's standing on one foot is approximately 4.3 x 10^6 Pa.

Click the below link, to learn more about pressure exerted on floor:

https://brainly.com/question/23125115

#SPJ11

Three discrete spectral lines occur at angles of 10.4°, 13.9°, and 14.9°, respectively, in the first-order spectrum of a diffraction grating spectrometer. (a) If the grating has 3710 slits/cm, what are the wavelengths of the light?
λ1 = nm (10.4°)
λ2 = nm (13.9°)
λ3 = nm (14.9°)
(b) At what angles are these lines found in the second-order spectra?
θ = ° (λ1)
θ = ° (λ2)
θ = ° (λ3)

Answers

(a) The formula for finding the wavelength of light using a diffraction grating is:

nλ = d(sinθ)

where n is the order of the spectrum, λ is the wavelength of light, d is the distance between the slits of the grating, and θ is the angle at which the spectral line is observed.

For the first-order spectrum, n = 1. We can rearrange the formula to solve for λ:

λ = d(sinθ) / n

Substituting the given values:

For λ1: λ1 = (1/3710 cm)(sin10.4°) = 4.31 × 10^-5 cm = 431 nm

For λ2: λ2 = (1/3710 cm)(sin13.9°) = 5.74 × 10^-5 cm = 574 nm

For λ3: λ3 = (1/3710 cm)(sin14.9°) = 6.14 × 10^-5 cm = 614 nm

Therefore, the wavelengths of the light are:

λ1 = 431 nm

λ2 = 574 nm

λ3 = 614 nm

(b) For the second-order spectrum, n = 2. Using the same formula as above:

For λ1:

λ1 = (1/3710 cm)(sinθ) = (2λ)(d)

Rearranging the formula to solve for θ:

θ = sin^-1(2λ/d)

Substituting the known values:

For λ1: θ = sin^-1(2(431 nm)(3710 slits/cm)) = 21.2°

For λ2: θ = sin^-1(2(574 nm)(3710 slits/cm)) = 28.3°

For λ3: θ = sin^-1(2(614 nm)(3710 slits/cm)) = 30.3°

Therefore, the angles at which the spectral lines are observed in the second-order spectrum are:

θ = 21.2° for λ1

θ = 28.3° for λ2

θ = 30.3° for λ3

To know more about refer wavelength here

brainly.com/question/4112024#

#SPJ11

what is the voltage drop percentage on two 10 awg thw copper, stranded, branch-circuit conductors, 120-ft long, supplying a 21-ampere, 240-volt load

Answers

The voltage drop percentage is 21.42% (51.408 / 240 x 100). This means that the load voltage would be reduced by 21.42%, which may cause problems if the load requires a certain voltage level to operate correctly.

The voltage drop percentage on two 10 awg thw copper, stranded, branch-circuit conductors, 120-ft long, supplying a 21-ampere, 240-volt load can be calculated using the Ohm's Law formula V = IR, where V is the voltage drop, I is the current, and R is the resistance.

The resistance of the 10 awg thw copper wire is 1.02 ohms per 1000 feet, so the resistance of 240-ft long conductors is 2.448 ohms (1.02 x 240 / 1000 x 2).

The current is 21 amperes, so the voltage drop is 51.408 volts (21 x 2.448). The voltage drop percentage can be calculated by dividing the voltage drop by the source voltage (240 volts) and multiplying the result by 100.

Therefore, the voltage drop percentage is 21.42% (51.408 / 240 x 100). This means that the load voltage would be reduced by 21.42%, which may cause problems if the load requires a certain voltage level to operate correctly.

To know more about  voltage visit:

brainly.com/question/29445057

#SPJ11

Particles q1, 92, and q3 are in a straight line.


Particles q1 = -28. 1 uc, q2 = +25. 5 uc, and


q3 = -47. 9 uC. Particles q1 and q2 are separated


by 0. 300 m. Particles q2 and q3 are separated by


0. 300 m. What is the net force on q3?

Answers

The net force on particle  [tex]\(q_3\)[/tex]  due to particles [tex]\(q_1\)[/tex] and  [tex]\(q_2\)[/tex]  can be determined using Coulomb's Law.

The force between two charged particles is given by [tex]\(F = \frac{{k \cdot |q_1 \cdot q_2|}}{{r^2}}\)[/tex], where k is the electrostatic constant [tex](\(8.99 \times 10^9 \, \text{N m}^2/\text{C}^2\))[/tex], [tex]\(|q_1|\)[/tex] and [tex]\(|q_2|\)[/tex] are the magnitudes of the charges, and r is the separation distance between the charges. First, let's calculate the force between [tex]\(q_1\)[/tex] and  [tex]\(q_2\)[/tex]  using their magnitudes and the given separation distance of [tex]\(0.300 \, \text{m}\)[/tex]:

[tex]\[F_{12} = \frac{{k \cdot |q_1 \cdot q_2|}}{{r_{12}^2}} = \frac{{(8.99 \times 10^9 \, \text{N m}^2/\text{C}^2) \cdot (28.1 \times 10^{-6} \, \text{C}) \cdot (25.5 \times 10^{-6} \, \text{C})}}{{(0.300 \, \text{m})^2}} = -3.58 \, \text{N}\][/tex]

Next, let's calculate the force between [tex]\(q_2\)[/tex] and [tex]\(q_3\)[/tex] using their magnitudes and the given separation distance of [tex]\(0.300 \, \text{m}\)[/tex]:

[tex]\[F_{23} = \frac{{k \cdot |q_2 \cdot q_3|}}{{r_{23}^2}} = \frac{{(8.99 \times 10^9 \, \text{N m}^2/\text{C}^2) \cdot (25.5 \times 10^{-6} \, \text{C}) \cdot (47.9 \times 10^{-6} \, \text{C})}}{{(0.300 \, \text{m})^2}} = 9.06 \, \text{N}\][/tex]

The net force on  [tex]\(q_3\)[/tex]  is the vector sum of the forces [tex]\(F_{12}\)[/tex] and \[tex]F_{23}\)[/tex]. Since both forces are directed towards [tex]\(q_3\)[/tex], we can add their magnitudes:

[tex]\[F_{\text{net}} = |F_{12}| + |F_{23}| = 3.58 \, \text{N} + 9.06 \, \text{N} = 12.64 \, \text{N}\][/tex]

Therefore, the net force acting on particle [tex]\(q_3\)[/tex] is [tex]\(12.64 \, \text{N}\)[/tex] in the direction towards particle  [tex]\(q_3\)[/tex] .

To learn more about Coulomb's Law refer:

https://brainly.com/question/506926

#SPJ11

A high-speed drill reaches 2400 rpm in 0.60 s .A.) What is the drill's angular acceleration?B.) Through how many revolutions does it turn during this first 0.60 s ?

Answers

A.) The angular acceleration of the drill is 167.55 rad/s^2.

B.) During the first 0.60 s, the drill turns approximately 4.80 revolutions.

A) We can use the following formula to calculate angular acceleration:

angular acceleration (alpha) = (angular velocity change (omega)) / (time (t))

The angular velocity change is equal to the final angular velocity minus the beginning angular velocity, so:

2400 rpm = 2400 * 2*pi / 60 rad/s = 100.53 rad/s = omega final

initial omega = 0 rpm = 0 rad/s t = 0.60 s

When we plug in the values, we get:

167.55 rad/s2 = alpha = (100.53 - 0) / 0.60

As a result, the drill's angular acceleration is 167.55 rad/s2.

B) We can use the following formula to calculate angular displacement:

(angular velocity (omega) * time (t)) = angular displacement (theta)

Because the angular velocity changes during the first 0.60 s, we must take the average of the initial and final angular velocities. The average angular velocity is as follows:

(0 + 100.53) / 2 = 50.27 rad/s

Using this average angular velocity and 0.60 s, we obtain:

50.27 * 0.60 = 30.16 radians theta

As a result, the drill turns approximately 4.80 revolutions within the first 0.60 s.

For such more question on acceleration:

https://brainly.com/question/460763

#SPJ11

in the bohr model of the hydrogen atom, what is the de broglie wavelength for the electron when it is in the nn = 1 level? Express your answer using three significant figures. In the Bohr model of the hydrogen atom, what is the de Broglie wavelength for the electron when it is in the m = 6 level? Express your answer using three significant figures.

Answers

The de Broglie wavelength for the electron in the m = 6 level of the Bohr model of the hydrogen atom is 6.59 x 10^-10 m.

The de Broglie wavelength for the electron in the nn = 1 level of the Bohr model of the hydrogen atom is given by the formula λ = h/p, where h is Planck's constant and p is the momentum of the electron. For the nn = 1 level, the radius of the electron's orbit is given by r = a0, where a0 is the Bohr radius. The momentum of the electron is then given by p = mv = (me*v)/sqrt(1 - v^2/c^2), where me is the mass of the electron, v is the speed of the electron, and c is the speed of light. Substituting these values into the formula for λ, we get:
λ = h/p = h/(me*v)/sqrt(1 - v^2/c^2) = h/(me*c*sqrt(1 - 1/c^2)) = h/(me*c)

Substituting the values of h, me, and c, we get:
λ = (6.626 x 10^-34 J.s)/(9.109 x 10^-31 kg x 2.998 x 10^8 m/s) = 2.42 x 10^-10 m

Therefore, the de Broglie wavelength for the electron in the nn = 1 level of the Bohr model of the hydrogen atom is 2.42 x 10^-10 m.

Similarly, for the m = 6 level, the radius of the electron's orbit is given by r = 6*a0. The momentum of the electron is then given by p = mv = (me*v)/sqrt(1 - v^2/c^2), where v is the speed of the electron. Substituting these values into the formula for λ, we get:
λ = h/p = h/(me*v)/sqrt(1 - v^2/c^2) = h/(me*c*sqrt(1 - (6*a0)^2/(me^2*c^2*h^2))) = h/(me*c*sqrt(1 - 36/137^2))

Substituting the values of h, me, and c, we get:
λ = (6.626 x 10^-34 J.s)/(9.109 x 10^-31 kg x 2.998 x 10^8 m/s x sqrt(1 - 36/137^2)) = 6.59 x 10^-10 m

Therefore, the de Broglie wavelength for the electron in the m = 6 level of the Bohr model of the hydrogen atom is 6.59 x 10^-10 m.

To know more about de Broglie wavelength visit:

https://brainly.com/question/30404168

#SPJ11

A solenoid is made of n = 6500 turns, has length l = 35 cm, and radius r = 1.7 cm. the magnetic field at the center of the solenoid is measured to be b = 1.8 x 10^-1 t. Find the numerical value of the current in milliamps.

Answers

The numerical value of the current in the solenoid is approximately 1.21 milliamps.

To find the current in the solenoid, we can use Ampere's law. The formula for the magnetic field B at the center of a solenoid is:

B = μ₀ * n * I / l

where B is the magnetic field, μ₀ is the permeability of free space (4π x 10⁻⁷ T·m/A), n is the number of turns, I is the current, and l is the length of the solenoid.

We are given B = 1.8 x 10⁻¹ T, n = 6500 turns, and l = 35 cm = 0.35 m. We need to find the current I.

1.8 x 10⁻¹ T = (4π x 10⁻⁷ T·m/A) * (6500 turns) * I / 0.35 m

To solve for I, rearrange the equation:

I = (1.8 x 10⁻¹ T * 0.35 m) / ((4π x 10⁻⁷ T·m/A) * 6500 turns)

Now, calculate the current:

I ≈ 0.00121 A

To convert the current to milliamps, multiply by 1000:

I ≈ 1.21 mA

Therefore, the numerical value of the current in the solenoid is approximately 1.21 milliamps.

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

Several bolts on the propeller of a fanboat detach, resulting in an offset moment of 5 lb-ft. Determine the amplitude of bobbing of the boat when the fan rotates at 200 rpm, if the total weight of the boat and pas- sengers is 1000 lbs and the wet area projection is approximately 30 sq ft. What is the amplitude at 1000 rpm?

Answers

The amplitude of the bobbing motion of the boat at 200 rpm is 1 rad. The amplitude of the bobbing motion of the boat at 1000 rpm is 0.039 rad.

How to determine amplitude?

Assuming that the boat is at rest and the propeller starts to rotate at 200 rpm, the unbalanced force acting on the boat due to the offset moment of the detached bolts can be calculated as follows:

F = mω²A

where F = unbalanced force,

m = mass of the boat and passengers,

ω = angular velocity of the propeller in radians per second (ω = 2πf where f = frequency in Hz), and A = amplitude of the bobbing motion.

Using the given values, calculate the unbalanced force at 200 rpm:

ω = 2π(200/60) = 20.94 rad/s

m = 1000 lbs / 32.2 ft/s² = 31.06 slugs

F = 31.06 slugs × (20.94 rad/s)² × A

F = 13,431A lb-ft

Next, calculate the amplitude of the bobbing motion:

A = F/k

where k = stiffness of the boat in the vertical direction.

For a simple harmonic motion, k can be calculated as:

k = mω²

Substituting the values and solving for A:

k = 31.06 slugs × (20.94 rad/s)² = 13,431 lb-ft/rad

A = F/k = 13,431A lb-ft / 13,431 lb-ft/rad = A rad

A = 1 rad

Therefore, the amplitude of the bobbing motion of the boat at 200 rpm is 1 rad.

To calculate the amplitude at 1000 rpm, we can use the same equation:

A = F/k

But now the angular velocity of the propeller is:

ω = 2π(1000/60) = 104.72 rad/s

The unbalanced force is still 13,431A lb-ft, but the stiffness of the boat in the vertical direction changes due to the increase in frequency. For a simple harmonic motion, the stiffness is:

k = mω²

Substituting the values and solving for k:

k = 31.06 slugs × (104.72 rad/s)² = 343,548 lb-ft/rad

Now calculate the amplitude at 1000 rpm:

A = F/k = 13,431A lb-ft / 343,548 lb-ft/rad = 0.039A rad

A = 0.039 rad

Therefore, the amplitude of the bobbing motion of the boat at 1000 rpm is 0.039 rad.

Find out more on amplitude here: https://brainly.com/question/3613222

#SPJ4

an electron is placed in an electric field of 60.6 n/c to the left. what is the resulting force on the electron? a.2.64 ✕ 10−21 n right b.9.70 ✕ 10−18 n left c.2.64 ✕ 10−21 n left d.9.70 ✕ 10−18 n right

Answers

This means that the resulting force on the electron is 9.70 x 10^-18 N to the left. Therefore, the correct answer is option b) 9.70 x 10^-18 N left.

The resulting force on an electron placed in an electric field of 60.6 n/c to the left can be calculated using the formula F = qE, where F is the force, q is the charge of the electron, and E is the electric field strength. The charge of an electron is negative (-1.6 x 10^-19 C).
So,
F = (-1.6 x 10^-19 C) x (60.6 n/c to the left)
F = -9.696 x 10^-18 N
This means that the resulting force on the electron is 9.70 x 10^-18 N to the left. Therefore, the correct answer is option b) 9.70 x 10^-18 N left.
To know more about force visit:

https://brainly.com/question/13191643

#SPJ11

The captain of a crab boat on the coast of Alaska notes that in a time period of r= 15 minutes, the boat goes up and down 24 times Randomized Variables 1 = 15 minutes Hair Carroxo 19 dtdeab occu the experti.com mekom SN67AS DA AD 2066-13457 In accordmon with Expert Term of Servicn, copying this coformation to any olution uning website i forbidden Domt my reutil internation of your Expert Account 3396 Part(a) luput an expression for the frequency of the ocean wave, f. Grade Su Deduction Potential CE It 9 В f 7 4 8 5 2 6 3 Submission Attempts (8 per at detailed j 1 hi k P m + 0 S t Submit Hint Hits: deduction per hint. Hints remaining ! Feedback. O deduction per feedback 33 Part (b) What is the frequency, in hertz? 33% Part() If the crests are d - 100.0 m apart how fast are the waves traveling in meters per second?

Answers

The waves are traveling at a speed of 2.7 meters per second.(a) To find the frequency of the ocean wave, f, we need to know the number of cycles per unit of time. In this case, the boat goes up and down 24 times in 15 minutes.

To find the frequency in cycles per minute, we divide the number of cycles (24) by the time period (15 minutes):
f = 24 cycles / 15 minutes = 1.6 cycles/minute

(b) To convert the frequency to hertz (cycles per second), we need to convert minutes to seconds:
1 minute = 60 seconds
1.6 cycles/minute * (1 minute / 60 seconds) = 1.6 cycles / 60 seconds ≈ 0.027 cycles/second ≈ 0.027 Hz

The frequency of the ocean wave in hertz is approximately 0.027 Hz.

(c) To find the speed of the waves (v) in meters per second, we can use the relationship between speed, frequency (f), and wavelength (λ):
v = f * λ

The crests are 100.0 meters apart, so the wavelength (λ) is 100.0 meters. We already found the frequency (f) in hertz, which is 0.027 Hz.
v = 0.027 Hz * 100.0 m = 2.7 m/s

The waves are traveling at a speed of 2.7 meters per second.

For more question on frequency

https://brainly.com/question/254161

#SPJ11

The information given in the problem allows us to determine the frequency of the ocean wave, which is the number of complete waves that occur in one unit of time. Using the formula f = 1/T, where T is the time period, we can calculate the frequency as f = 1/15 = 0.067 Hz. This means that in one second, the wave completes 0.067 cycles.

To determine the speed of the wave, we need to use the formula v = fλ, where v is the speed, f is the frequency, and λ is the wavelength. We are given that the crests are d = 100.0 m apart, which is equal to one wavelength. Therefore, we can calculate the speed as v = fλ = 0.067 × 100.0 = 6.7 m/s.This means that the wave is traveling at a speed of 6.7 meters per second. This speed is relatively slow compared to other types of waves, such as electromagnetic waves, which travel at the speed of light. The speed of ocean waves depends on a variety of factors, including the depth of the water, the wind speed, and the shape of the coastline.

To learn more about frequency click here: brainly.com/question/14316711

#SPJ11

A plastic rod is rubbed with a piece of carpet and then held near a bottom (B) tape. Make a sketch showing the rod and the tape. Use the symbols "+" and to indicate the location of the charge on object Problem 2 A bottom (B) piece of tape and a top (1) piece of tape are separated halfway as shown below. Indicate the parts of the tapes that are charged and the type of the charge on the diagram.

Answers

The charged parts of the tapes will be indicated on the diagram by using the symbols "+" and "-" to represent the type of charge.

To illustrate the scenario described, a sketch can be made with a plastic rod and a bottom tape. After rubbing the plastic rod with a piece of carpet, it becomes negatively charged (-). When the charged plastic rod is brought close to the bottom tape, it will induce a positive charge (+) on the tape's surface closest to the rod and a negative charge (-) on the surface furthest from the rod. Therefore, the sketch will show a plastic rod with a negative charge (-) and a bottom tape with a positive charge (+) on one side and a negative charge (-) on the other side.

In the scenario described, a bottom (B) piece of tape and a top (1) piece of tape are separated halfway. When separating, some electrons will remain on one tape while the other tape becomes positively charged, indicating a transfer of electrons from one tape to the other. As a result, the bottom tape will have a positive charge (+) on the side facing the top tape and a negative charge (-) on the other side, while the top tape will have a negative charge (-) on the side facing the bottom tape and a positive charge (+) on the other side.

Learn more about plastic rod:

https://brainly.com/question/3060815

#SPJ11

A nearsighted person wears contacts with a focal length of ? 8.0cm
A. If this person's far-point distance with her contacts is 8.5 m, what is her uncorrected far-point distance?
|d1| = ________ cm

Answers

The person can only see objects clearly up to a distance of 1.316 meters.

How to find the distance?

To find the uncorrected far-point distance of a nearsighted person wearing contacts with a focal length of 8.0 cm, we can use the formula:

1/d₁ = 1/f - 1/d₂

where d₁ is the uncorrected far-point distance, f is the focal length of the contacts, and d₂ is the far-point distance with the contacts.

We know that f = 8.0 cm and d₂ = 8.5 m = 850 cm (since the far-point distance is defined as the distance at which the eye can see distant objects clearly).

Plugging in these values, we get:

1/d₁ = 1/8.0 - 1/850

Solving for d, we get:

d₁ = 131.6 cm

Therefore, the uncorrected far-point distance of the nearsighted person is 131.6 cm or 1.316 meters.

To explain in 150 words, a nearsighted person has difficulty seeing distant objects clearly because the light entering their eyes is focused in front of the retina instead of directly on it. Contact lenses with a negative focal length can help correct this by diverging the incoming light and moving the focal point further back. The focal length of the contacts in this case is 8.0 cm.

The far-point distance is the farthest distance at which a person can see clearly without visual aids. With the contacts, the far-point distance is 8.5 meters. Using the formula for lenses, we can find the uncorrected far-point distance, which is the farthest distance at which a person can see clearly without the contacts. The uncorrected far-point distance is 131.6 cm or 1.316 meters.

Learn more about distance

brainly.com/question/31713805

#SPJ11

Light of wavelength 575 nm falls on a double-slit and the third order bright fringe is seen at the angle of 6.5 degrees. What is the separation between the double slits?
A. 5 µm
B. 10 µm
C. 15 µm
D. 20 µm

Answers

The correct answer is B)10 µm, because the separation between the double slits is 10 µm.

What is the separation between the double slits when the third order bright fringe is observed at an angle of 6.5 degrees?

The separation between the double slits can be determined using the formula for the fringe spacing in a double-slit interference pattern.

By knowing the wavelength of light (575 nm), the order of the fringe (third order), and the angle at which it is observed (6.5 degrees), we can calculate the separation between the slits.

In a double-slit interference pattern, the separation between the slits can be calculated using the formula:

d = (λ * L) / (m * sin(θ))

Where:

d is the separation between the double slits,λ is the wavelength of light (575 nm or 575 × 10^(-9) m),L is the distance between the double-slit and the screen (assumed to be far enough for small angles),m is the order of the bright fringe (third order),θ is the angle at which the fringe is observed (6.5 degrees or 0.113 radians).

Substituting the values into the formula:

d = (575 × 10^(-9) * L) / (3 * sin(0.113))

To find the separation between the double slits, we need the value of L (the distance between the double-slit and the screen). Without that information, we cannot provide an exact numerical answer.

However, The correct answer is B)10 µm, the separation of 10 µm (option B) would be the closest to the calculated value.

Learn more about double-slit

brainly.com/question/30890401

#SPJ11

Other Questions
the kf for co(nh3)62 is 1.0 10-5 and the ksp for co(oh)2 is 2.5 10-15. what is the correct equilibrium constant (k) for the following reaction? for approximately how long did the berlin wall separate east and west berlin? The following selected amounts are available for Splish Brothers Inc. $4100 Retained earnings (beginning) Net loss 260 Cash dividends declared 265 Stock dividends declared 270 What is its ending Retained Earnings balance? $3840. $3305. $3575. O $3740. In the exercise, X is a binomial variable with n = 8 and p = 0.4. Compute the given probability. Check your answer using technology. HINT [See Example 2.] (Round your answer to five decimal places.) P(X = 6) 2. In the exercise, X is a binomial variable with n = 5 and p = 0.3. Compute the given probability. Check your answer using technology. HINT [See Example 2.] (Round your answer to five decimal places.) P(3 X 5) 3. According to an article, 15.8% of Internet stocks that entered the market in 1999 ended up trading below their initial offering prices. If you were an investor who purchased four Internet stocks at their initial offering prices, what was the probability that at least two of them would end up trading at or above their initial offering price? (Round your answer to four decimal places.) P(X 2) = 4. Your manufacturing plant produces air bags, and it is known that 20% of them are defective. Five air bags are tested. (a) Find the probability that three of them are defective. (Round your answer to four decimal places.) P(X = 3) = (b) Find the probability that at least two of them are defective. (Round your answer to four decimal places.) P(X 2) = Which protein modification is most closely linked to proteasome recruitment? acetylation ubiquitination phosphorylation methylation in the long run people come to expect whatever inflation rate the fed chooses to produce, so gdp returns to its natural rate. true or false From the standpoint of promoting successful strategy execution, it is important that the firm's motivation and reward system SS accentuate positive rewards but also carry the risk of punishment for lackadalsical or indifferent effort and subpar performance. be completely free of such elements as tension, pressure, anxiety, job insecurity, and tight deadlines--a no-pressure/no-adverse-consequences work environment is essential. reduce job insecurity and give employees an incentive to stay busy and work hard. not deny rewards to employees who put forth good effort and try hard. emphasize only positive types of rewards. hair texture is an example of incomplete dominance. a person who is homozygous dominant for the h gene has curly hair. what genotype would someone with wavy hair have? Ciara needs 4 yards of fabric for a dress. She already had 2 1/4 yards of fabric Convert 32/5 to a mixed number why do traders use volatility smiles for pricing options? Carbon dioxide concentrations are often used as proxy for temperature. What does this mean? Atmospheric CO2 concentrations and global temperature are indirectly related, so when CO2 rises, temperature drops Atmospheric CO2 concentrations and global temperature are directly related, so when CO2 rises, so does temperature Atmospheric CO2 concentrations and global temperature fluctuate independently A unit contribution margin measures: ____________a. The difference between price and variable cost per unit b. The difference between sales and cost of goods sold on a unit basis c. The difference between unit sales and total costs per unit d. The percentage difference between sales and cost of goods sold true/false. branded keywords are useful for potential customers who already know about your brand. How much sulfuric acid can be produced from 9.90 ml of water (d= 1.00 g/ml) and 26.5 g of SO3? response elements are located upstream of the ppar gamma gene in an area called the S and P are the midpoints of thelegs, RT and QU, of trapezoid QRTU.If QRTU =X?= -6x + 37, PS = x + 33, and= 2x + 41, what is the value of FGH is reflected across the x-axis and then translated 3 units to the right. The result is F'G'H'. Tell whether each statement is True or False In order to calculate the density of a solution, you divide the mass of a liquid (5. 10 g) by its volume (250. 0 mL). How should you report its density Aluminum is mined as the mineral bauxite, which consists primarily of Al2O3 (alumina). The aluminum can be refined by heating the bauxite to drive off the oxygen: 2Al2O3(s)=4Al(s)+3O2(g) How many aluminum is produced from 1950 kg of Al2O3? The oxygen produced in part 1 is allowed to react with carbon to produce carbon monoxide. Write a balanced equation describing the reaction of alumina with carbon. You need not to include the states of matter in the balanced equation. How much CO is produced from alumina in Part 1? how many teenagers (people from ages 13-19) must you select to ensure that 4 of them were born on the exact same date (mm/dd/yyyy)? simplify your answer to an integer.