CAN YALL GO FOLLOW MY INS PLSS yeabdagod ​

The net force acting on the car is 65 N to the left

The net force acting on an object is simply defined as the resultant force acting on the object.

From the question given, we obtained the following data:

The net force acting on the car can be obtained as follow:

Fₙ = Fₗ – Fᵣ

Fₙ = 315 – 250

Therefore, the net force acting on the car is 65 N to the left

Learn more on net force: https://brainly.com/question/19549734

Since there is no friction, the net force on the car in the x - direction will be 65 Newtons

Given that Dave and Alex push on opposite ends of a car that has a mass of 875 kg.

Dave pushes the car to the right with a force of 250 N, which is positive direction and Alex pushes to the left with a force of 315 N which is negative direction. Since there is no friction, only the horizontal forces will be considered.

To calculate the net force on the car in the x-direction, we will find the difference between the two forces because of their directions are opposite to each other.

Net force = 315 - 250

Net force = 65 Newtons

Therefore, the net force on the car in the x - direction will be 65 Newtons

Learn more about resolution of forces here: https://brainly.com/question/11556949

Answer:

Proton

Explanation:

The nucleus has an overall positive charge as it contains the protons. Every atom has no overall charge (neutral). This is because they contain equal numbers of positive protons and negative electrons.

Answer:

Approximately [tex]106\; \rm m[/tex], [tex](1/16)[/tex] of the original distance, assuming that the acceleration is constant.

Explanation:

If the acceleration on this vehicle is constant, the SUVAT equations would apply:

[tex]\displaystyle v^{2} - u^{2} = 2\, a\, x[/tex].

Rearrange this equation to find an expression for [tex]x[/tex], the displacement required for the vehicle to come to a stop:

[tex]\begin{aligned} x &= \frac{v^{2} - u^{2}}{2\, a} \\ &= \frac{-u^{2}}{2\, a} && (\text{$v = 0\; \rm m \cdot s^{-1}$})\end{aligned}[/tex].

Thus, under these assumptions, [tex]x[/tex] would be proportional to [tex]u^{2}[/tex]. In other words, the distance required for this vehicle to come to a stop would be proportional to the square of the initial velocity of this vehicle.

If the initial velocity [tex]u[/tex] is reduced to [tex](1/4)[/tex] (a quarter) of the initial value, the distance required for stopping this vehicle would be [tex](1/4)^{2} = (1/16)[/tex] of the initial value:

[tex]\begin{aligned}1,\!697\; {\rm m} \times \frac{1}{16} \approx 106\; \rm m\end{aligned}[/tex].

The characteristics of the speed of the waves in strings and the resonance allows to find the change in the fundamental frequency when changing the tension is:

The speed of the chord wave is given by the relationship between the tension and the density of the medium.

          [tex]v= \sqrt{\frac{T}{\mu } }[/tex]  

Where v is the velocity of the wave, T the tension of the string and μ the density

In a rope held at the ends, a process of standing waves occurs, two at the point where it is attached we have a node and a anti-node in the center.

             2L = n λ

Where L is the length of the chord and call the wavelength

Wave speeds are related to wavelength and frequency.

        v = λ f

We substitute.

            [tex]\sqrt{\frac{T}{\mu } } = \frac{2L}{n} \ \ f[/tex]  

For the fundamental frequency n = 1

            f₀ = [tex]f_o = \sqrt{\frac{T}{\mu } } \ \ \frac{1}{2L}[/tex]  

They indicate that the tension increases 1.70%

           T = T₀ + 0.17 T₀

           T = 1.17 T₀

We substitute.

         [tex]f = \sqrt{1.17 } \ \sqrt{\frac{T_o}{\mu } } \ \ \frac{1}{2L}[/tex]

         f = ra1.17 f₀

         f = 1.08 f₀

In conclusion, using the characteristics of the velocity of the waves in strings and the resonance we can find the change in the fundamental frequency when changing the tension is:

Learn more about string resonance here: brainly.com/question/16010929

The beginning of the formation of galaxies and clusters of galaxies are the slight fluctuations seen in maps of the cosmic background radiation. So, the correct option is C.

The cosmic background radiation is defined as the microwave radiation that fills all of space which is a remnant that provides an important source of data on the early universe. With a standard optical telescope, the background space between stars and galaxies is almost completely dark.

It is also called the Cosmic Microwave Background (CMB) or electromagnetic radiation filling the universe which is a residual effect of the Big Bang that happened 13.8 billion years ago. The beginning of the formation of galaxies and clusters of galaxies are the slight fluctuations seen in maps of the cosmic background radiation.

Therefore, the correct option is C.

Learn more about Cosmic Background radiation, here:

https://brainly.com/question/1310278

#SPJ6

Your question is incomplete, most probably the complete question is:

What are the slight fluctuations seen in maps of the cosmic background radiation?

a. uncertainties in the map

b. variations in the instrument's sensitivity

c. the beginning of the formation of galaxies and clusters of galaxies

d. dark matter

e. none of the above

Answer:

because of the gravity of the earth

Answer:

here

Explanation:

Climate is determined by the temperature and precipitation characteristics of a region over time. The temperature characteristics of a region are influenced by natural factors such as latitude, elevation and the presence of ocean currents.

Answer:

1. A and C are balanced forces as all the forces get cancelled by the opposite and equal force.

2. B and D as in B the Net force is 5N to the right and in D the Net force is 20N to the right.

3. This would be all the unbalance forces which are B and D

4. B would be moving 5N to the right and D would move 20N to the right.

Answer:

Why are Saturn's rings so noticeable? They are made of lots of fresh, bright icy particles from a recent breakup.

Explanation:

Answer:

a-

V= IR

9V = I ×( 12+6)

I = 9/ 18 A = 0.5 A

b

V=IR

240 = 6 A ×( 20 + R)

40 = 20 + R

R = 20 ohm

c

resultant resistance of the 2 parallel resistances= Ro

1/Ro = 1/ 5 + 1/ 20

1/Ro =( 20+5)/100

= 1/Ro = 1/4

Ro= 4 ohm

V=IR

V = 2A × ( 1+ 4 OHM)

V = 10V

d

equivalent resistance = Ro

1/Ro = 1/(2+8) + 1/(5+5)

1/Ro = 1/10 +1/10

2/10 = 1/ Ro

Ro= 10/2 = 5 ohm

V = IR

12V = I × 5Ohm

I=2.4 A

Answer: Increasing the amount of sugar.

Explanation: Increasing the amount of reactants increases the rate of the reaction. This is given by the collision theory, which states that a chemical reaction must involve the collisions of particles together, as well as with the walls of the container it is in. By increasing the amount of reactant in the container you are increasing the collision frequency, and the rate of the reaction is dependant on the collision frequency multiplied by the fraction of collisions that are effective. Increasing the temperature increases the collision frequency as well as the fractions of collisions that are effective, so it’s definitely not that one. Hope this helped:)

Answer:

Explanation:

The properties of magnets are used to make electricity. Moving magnetic fields pull and push electrons. ... Moving a magnet around a coil of wire, or moving a coil of wire around a magnet, pushes the electrons in the wire and creates an electrical current.

Answer:

the emission of energy as electromagnetic waves or as moving subatomic particles, especially high-energy particles which cause ionization.

is called radiation

Answer:

Explanation:

I hope it's help u

Answer:

The atmosphere has frozen out into the polar ice caps and permafrost as Mars has cooled.

Explanation: Good luck box BrokenTag27

Answer:

B. Radio waves

Explanation:

Radio waves are transmitted easily through air. They do not cause damage if absorbed by the human body, and they can be reflected to change their direction. These properties make them ideal for communications.

Hope this helps!!

Answer:

B

Explanation:

Radio Waves

Answer:

116 N•s

Explanation:

change in momentum = mvf-mvi

= m(Vf - Vi)

= 20( 8.1-2.3)

change in momentum= 116 kg•m/s

: .impulse is 116 N•s

Answer:

The greater the mass, the greater is the diameter

Explanation:

The greater the mass, the greater is the diameter. almost all galaxies contain supermassive black holes.

La densidad del metal como se requiere en la pregunta es 7.8 * 10 ^ 3 Kg / m ^ 3.

Sabemos que ese empuje hacia arriba = peso en aire - peso en líquido

Peso en el aire = 63,5 * 10 ^ -3 Kg * 10 m / s ^ 2 = 0,635 N

Peso en líquido = 55,4 * 10 ^ -3 Kg * 10m / s ^ 2 = 0,554 N

Empuje hacia arriba = 0,635 N - 0,554 N = 0,081 N

Pero ;

Empuje hacia arriba = Volumen * densidad del fluido * aceleración debido a la gratitud

volumen = empuje hacia arriba / densidad del fluido * aceleración debido a la gratitud

volumen = 0.081 N / 1000 * 10

Volumen = 8.1 * 10 ^ -6 m ^ 3

Densidad = masa / volumen

Densidad = 63,5 * 10 ^ -3 Kg / 8,1 * 10 ^ -6 m ^ 3

= 7,8 * 10 ^ 3 kg / m ^ 3

Más información: https://brainly.com/question/12108425

Answer:

because of the gravity of the earth

Answer:

We can only find the change in velocity by the area under the acceleration time graph by calculating the area under the curve to the given time. Then by the formula of the difference in the final and initial velocity you can find the final velocity of the object in the given time period.

Answer:

Im pretty sure its number 2

Explanation:

The first one a scientific way of finding the age of something that is very old (such as a dinosaur bone) by measuring the amount of certain forms of carbon in it

Answer:

A 5.00-g bullet is fired horizontally into a 1.20-kg wooden block resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.20. The bullet remains embedded in the block, which is observed to slide 0.230 m along the surface before stopping.

Explanation:

Answer:

Answer is below….

Explanation:

The velocity is represented by the slope of a position-time graph. The faster the motion changes, the steeper the slope. The change in position divided by the corresponding change in time may be used to compute average velocity from a position-time graph.

_________________________________________________________

(hope this helps can I pls have brainlist (crown)☺️