Can someone please
Help me on these

The length of side PR can be either 14 or 5.

In geometry, corresponding sides are the sides of two or more geometric figures that are in the same relative position to each other. When two or more figures are similar, their corresponding sides are in the same ratio or proportion, meaning that the ratio of the length of one side in the first figure to the length of the corresponding side in the second figure is constant. For example, if two triangles are similar, then their corresponding sides are proportional to each other. The side that corresponds to another side is typically identified using the same letter with a prime symbol (') added to it.

Since the triangles PQR and STV are similar, their corresponding sides are proportional. That is,

PR / SV = QR / TV

Substituting the given lengths, we get:

(3x-19) / (3x-9) = (x-4) / 12

Cross-multiplying and simplifying, we get:

36x - 228 = (3x-9)(x-4)

36x - 228 = 3x^2 - 21x + 36

3x^2 - 57x + 264 = 0

Dividing both sides by 3, we get:

x^2 - 19x + 88 = 0

Factoring the quadratic equation, we get:

(x-11)(x-8) = 0

Therefore, x = 11 or x = 8.

If x = 11, then PR = 3x-19 = 3(11) - 19 = 14.

If x = 8, then PR = 3x-19 = 3(8) - 19 = 5.

Therefore, the length of side PR can be either 14 or 5.

To know more about equation visit:

https://brainly.com/question/29090112

#SPJ1

The inventory turnover ratio can be calculated by dividing the cost of goods sold by the average inventory value. In this case, the inventory turnover ratio is 0.5, and the correct answer is (D) 0.5.

The inventory turnover ratio measures the number of times a company sells and replaces its inventory during a period. It can be calculated by dividing the cost of goods sold by the average inventory value.

The inventory turnover ratio = Cost of goods sold / Average inventory value

In this case, the cost of goods sold is $600,000 and the average inventory value is $1,200,000.

Inventory turnover ratio = $600,000 / $1,200,000 = 0.5

Therefore, the inventory turnover ratio is 0.5, and the correct answer is (D) 0.5.

Learn more about division here: brainly.com/question/21416852

#SPJ4

Complete question:

If the average aggregate inventory value is $1,200,000 and the cost of goods sold is $600,000, which of the following is inventory turnover?

A)60

B)10.4

C)2

D)0.5

E)None of these

Hey!
A: 50% Of people = 150 people prefer oranges.

B: 10% Of people = 15 people prefer pineapple.

C: 15% Of people = 20 people prefer blueberries.

D: 5% Of people = 5 people prefer apples.

E: 20% Of people = 22 people prefer strawberries

Answer: The answer is D

Step-by-step explanation:

Pythagorean theorem: a²+b²=c²

x²+x²=14²

2x²=196

Evaluate...

x=7√2

Answer: The boat is approximately 357.4 feet from the base of the cliff.

Step-by-step explanation:

Let x be the horizontal distance from the base of the cliff to the boat. Using the tangent function, we can write:

tan(38) = 275 / x

Solving for x, we have:

x = 275 / tan(38)

Using a calculator, we get:

x ≈ 357.4 feet

Therefore, the boat is approximately 357.4 feet from the base of the cliff.

Answer:

352m

Step-by-step explanation:

h = 275m

a = b (alternative angles)

.: b = 38°

Let the base from the boat to the cliff be d

Tan 38° = opposite ÷ adjacent

Tan 38° ° = 275 ÷d

d = 275 ÷ Tan 38 °

d = 352m

.: The boat is 352m away from the foot of the cliff

Answer:

All three answers are correct, but they represent different algebraic expressions that are equivalent to x + 8.

Step-by-step explanation:

i) 1/4(x + 8) is equivalent to x/4 + 2. This expression distributes the 1/4 coefficient to both terms inside the parentheses.

ii) x + 2 is equivalent to 1x + 2. This expression simplifies x + 8 by subtracting 6 from the constant term.

iii) 1/4x + 2 is equivalent to 2 + 1/4x. This expression rearranges the terms in x + 8 to separate x from the constant term.

Therefore, the students who provided any of these answers demonstrated a correct understanding of algebraic expressions.

The answer on Probability to draw probability tree and calculate the final solution the answers are (a) the tree is given below , (b) i) P(R1 ∩ W2) means the probability of drawing a red marble on the first draw and a white marble on the second draw , ii) The solution is P(R1) * P(W2|R1) = (4/9) * (5/8) = 5/18. (C) 17/36. (d) the tree is given below.

In probability theory,  experiment is  process or  situation that produces  set of possible outcomes or events, each with  associated probability of occurrence.

In  experiment, the set of all possible outcomes is called  sample space, denoted by  symbol Ω. The outcomes in  sample space can be either discrete, meaning they are countable and separate, or continuous, meaning they are uncountable and form range or interval.

a) Probability tree:

       P(W1) = 5/9

         /              \

      P(W2|W1)         P(R2|W1) = 4/9

      /      \          /      \

  P(W3|W1W2)  P(R3|W1W2) P(W3|R1W2)  P(R3|R1W2)

  /   \       /   \       /    \        /    \

P(W4|W1W2W3) P(R4|W1W2R3) P(W4|R1W2W3) P(R4|R1W2R3)

b)

i) P(R1 ∩ W2) means the probability of drawing a red marble on the first draw and a white marble on the second draw.

ii) The solution is P(R1) * P(W2|R1) = (4/9) * (5/8) = 5/18.

c)

i) There are two ways to get at least one red ball: drawing a red ball on the first draw or drawing a white ball on the first draw and a red ball on the second draw.

ii) Angela is not correct. To calculate the probability of drawing at least one red ball, we need to add the probabilities of the two ways to get at least one red ball:

P(at least one red ball) = P(R1) + P(W1) * P(R2|W1) = (4/9) + (5/9) * (4/8) = 17/36.

d) If the first ball is replaced before the second draw, then the probability tree would have the same probabilities for each draw. The new probability tree would be:

         P(W1) = 5/9

         /              \

      P(W2)             P(R2) = 4/9

      /      \          /      \

  P(W3)      P(R3)     P(W3)     P(R3)

  /   \       /   \    /    \     /    \

P(W4) P(R4)  P(W4) P(R4) P(W4)  P(R4)

To know more about Event visit:

https://brainly.com/question/17089724

#SPJ1

Sea "x" la longitud de cada lado del jardín original en metros.

La superficie del jardín original es x^2 m².

Si cada lado del jardín original se aumenta en 5 m, el nuevo lado del jardín será de (x+5) metros, y la nueva superficie será (x+5)^2 m².

Según el problema, la nueva superficie total es de 121 m²:

(x+5)^2 = 121

Tomando la raíz cuadrada en ambos lados:

x+5 = 11

Restando 5 en ambos lados:

x = 6

Por lo tanto, la longitud de cada lado del jardín original es de 6 metros.

Por lo tanto, la respuesta correcta es O 6 metros.

x - the length of each side of the original garden

A = x²

( x + 5 )² = 121  /√

x + 5 = 11,  or  x + 5 = - 11;

x = 11 - 5

x = 6  ( another solution in negative )

Answer:

A ) 6 m

Answer: 2

Step-by-step explanation:

because the common range here is 7-13.

2 isnot in this common range so it could be identified as an outlier

Answer:

Triangle XYZ is similar to Triangle RQS

Step-by-step explanation:

Triangle XYZ is similar to Triangle RQS

XZ/SR = 12/3 = 4

ZY/QS = 16/4 = 4

YX/RQ = 14/3.5 = 4

similar figures have all corresponding sides in the same ratio

Answer:

a+b>0, a>0, b>0, a-b<0

Step-by-step explanation:

well, a>0 and b>0 since they're both positive

Answer:

sample answer

Step-by-step explanation:

The number further left on a number line is the smaller number. For positive numbers, the number closest to zero is smaller. For negative numbers, the number closest to zero is larger. If a is less than b, and they are both positive, then a is closer to 0 than b. The opposite of a is also closer to zero than the opposite of b, so the opposite of a must be larger than the opposite of b.

The solutions to the quadratic function 9x² - 15x - 6 = 0 are given as follows:

x = -1/3 and x = 2.

The quadratic equation for this problem is defined as follows:

9x² - 15x - 6 = 0.

The coefficients of the function are given as follows:

a = 9, b = -15 and c = -6.

The discriminant of the function is obtained as follows:

D = b² - 4ac

D = (-15)² - 4 x 9 x (-6)

D = 441.

Then the solutions to the quadratic function are obtained as follows:

More can be learned about quadratic functions at https://brainly.com/question/1214333

#SPJ1

Answer:

[-1,inf) and [-2,inf)

Step-by-step explanation:

Domain is all the X coordinates that the function will pass through. it starts at -1 and goes to inf so [-1,inf) is the domain. The range is all the Y coordinates the function will pass through. It starts at -2 and goes up to inf so [-2,inf) and that is your answer

The chi-squared value [tex](0.032)[/tex] is smaller than for the crucial value [tex](3.84)[/tex], thus do not reject the null hypotheses that there is no connection between the kind of art and the style.

The significance level, alpha, which establishes the test's sensitivity, and the test statistic, which really is unique to each type of test, both influence the significance level for a hypothesis test.

Critical values in hypothesis testing indicate whether the outcomes are statistically significant. They aid in determining the confidence intervals' upper and lower bounds. In both circumstances, crucial values accommodate for ambiguity in sample you're using it to make conclusions about a population.

                       modern    classical    total

paintings            0.38         0.62             1

sculptures          0.41          0.59             1

total                    0.79          1.21              2

The degrees of freedom for the test is [tex](r - 1) *(c - 1)[/tex]

[tex](2 - 1) * (2 - 1) = 1[/tex]

The chi-squared statistic [tex]0.032[/tex]

To know more about critical value visit:

https://brainly.com/question/30168469

#SPJ1

The intersection of sets A and B is the set of all elements that are in both set A and set B is 5.

In set theory, the union of two or more sets is a set that contains all the distinct elements of the sets being considered.

Set A = {1, 2, 3, 7, 9, 11, 13, 19} has 8 elements.

Set B = {1, 2, 3, 4, 8, 11, 18, 19, 20} has 9 elements.

The union of sets A and B, denoted as A ∪ B, is the set of all elements that are in either set A or set B or in both.

n(A ∪ B) = 8 + 9 - n(A ∩ B)

Now we need to find n(A ∩ B), which is the number of elements that are common to both sets A and B.

The intersection of sets A and B, denoted as A ∩ B, is the set of all elements that are in both set A and set B. We can find n(A ∩ B) by counting the number of common elements between sets A and B, which are 1, 2, 3, 11, and 19.

Therefore, n(A ∩ B) = 5.

n(A ∪ B) = 17 + 5

n(A ∪ B) = 22

So, the number of elements in the set A ∪ B is 22.

The intersection of sets A and B is the set of all elements that are in both set A and set B. From above, we know that the common elements between sets A and B are 1, 2, 3, 11, and 19.

Therefore, n(A ∩ B) = 5.

So, the number of elements in the set A ∩ B is 5.

To know more about union visit:

https://brainly.com/question/13264255

#SPJ1

Answer:

To find the Taylor series of a function f(x) about a point a, we can use the following formula:

f(x) = f(a) + f'(a)(x-a)/1! + f''(a)(x-a)^2/2! + f'''(a)(x-a)^3/3! + ...

where f'(a), f''(a), f'''(a), ... denote the first, second, third, ... derivatives of f evaluated at a.

In this case, we have:

f(x) = 1 + 3e^(x+1)

To find the Taylor series about x=0, we need to evaluate the function and its derivatives at x=0.

f(0) = 1 + 3e^(0+1) = 1 + 3e

f'(x) = 3e^(x+1)

f'(0) = 3e^(0+1) = 3e

f''(x) = 3e^(x+1)

f''(0) = 3e^(0+1) = 3e

f'''(x) = 3e^(x+1)

f'''(0) = 3e^(0+1) = 3e

and so on.

Substituting these values into the formula for the Taylor series, we get:

f(x) = f(0) + f'(0)x + f''(0)x^2/2! + f'''(0)x^3/3! + ...

= (1 + 3e) + 3ex + 3ex^2/2! + 3ex^3/3! + ...

= 1 + (3 + 3e)x + (3/2)e x^2 + (1/2)e x^3 + ...

Therefore, the Taylor series for 1+3e^x+1 about x=0 is:

1 + (3 + 3e)x + (3/2)e x^2 + (1/2)e x^3 + ...

It mean X will be a better choice for all inputs except small inputs when we say that an algorithm X is asymptotically more efficient than Y. So the option B is correct.

Asymptotic analysis takes algorithm growth in terms of input size into account. If an algorithm X runs faster than Y for all input sizes n greater than or equal to n₀, then X is said to be asymptotically better than Y.

When we claim that a method X is asymptotically more efficient than Y, we indicate that X will be a better option for all inputs except small inputs. The better choice would depend on the specific problem and algorithm.

Generally, if X is asymptotically more efficient than Y, then X should be the preferred choice for larger inputs, while Y may be better suited for small inputs. So the option B is correct.

To learn more about Asymptotic analysis link is here

brainly.com/question/30357219

#SPJ4

The complete question is:

What does it mean when we say that an algorithm X is asymptotically more efficient than Y?

a) X will be a better choice for all inputs

b) X will be a better choice for all inputs except small inputs

c) X will be a better choice for all inputs except large inputs

d) Y will be a better choice for small inputs

IV individuals from different cultures

DV the belief that dreams have meaning.

Independent Variable: Culture

Belief in the meaning of dreams is a quasi-independent variable (since it cannot be manipulated or assigned randomly)

The response to whether or not dreams have meaning is the dependent variable.

An experimental investigation typically contains three types of variables: independent variables, dependent variables, and controlled variables.

A compared to the rest of the country. Because the variable levels are pre-existing, it is not possible to assign participants to groups at random.

To know more about Variable visit:

brainly.com/question/1511425

#SPJ1

Correct Option is No matter what number you choose to substitute for the variable, the result will be a true statement.

The number of solutions of an equation based on the total number of variables contained in it. As a result, the equation system consists of two or more equations with two or more variables.

It can be any combination such as

There are three different forms of equation solutions, depending on the quantity of variables and equations. They are

The term “infinite” represents limitless or unboundedness.

For the infinite number of solution of the equation No matter what number you choose to substitute for the variable, the result will be a true statement.

To know more about variable, visit:

https://brainly.com/question/15078630

#SPJ1

The population of the termite colony will be approximately 593 in 4 years.

Since the population of the termite colony will double in 6 years, we can use the formula:

P = P0 * 2^(t/k)

where P0 is the initial population, P is the population after time t, and k is the time it takes for the population to double (in this case, 6 years).

We know that the current population is 16000, so P0 = 16000. We also know that the population consists only of females, so we can assume that the population grows linearly.

To find the population of the termite colony in 4 years, we need to determine how much the population grows in that time. Since the population doubles in 6 years, we can assume that it grows by a factor of 2/6 per year. Therefore, the population after 4 years can be calculated as:

P = P0 * (2/6)^4

= 16000 * (1/27)

= 592.59 (rounded to the nearest whole number)

Therefore, the population of the termite colony will be approximately 593 in 4 years.

To know more about problems related to population, click here:

https://brainly.com/question/25630111

#SPJ1

Answer:

The function that models the number of flowers, F(t), is given as F(t) = cd, where c and d are constants. We need to find the values of c and d in order to write the equation for the number of flowers in the pond at time, t.

From the table, we know that when t=0, F(t) = 200. This means that:

F(0) = cd = 200

Similarly, when t=1, F(t) = 800. This means that:

F(1) = cd = 800

We can solve this system of equations for c and d by dividing the second equation by the first equation:

F(1)/F(0) = 800/200

4 = d/c

Now we can substitute the value of d/c into either equation to solve for one of the constants. Let's use the first equation:

cd = 200

c(d/c) = 200

d = 200/c

Substituting this into the equation d/c = 4, we get:

4 = d/c = (200/c) / c

4c = 200

c = 50

Now we can find the value of d using d = 200/c:

d = 200/50 = 4

Therefore, the equation for the number of flowers in the pond at time, t, is:

N(t) = cd = 50(4) = 200

So, the answer is N(t) = 200(1), which means that at any time t, the number of flowers in the pond is 200.

Answer:

A. Using the lens equation, 1/p + 1/q = 1/f, and substituting f = 5 cm and q = 7 cm, we can solve for p:

1/p + 1/7 = 1/5

Multiplying both sides by 35p, we get:

35 + 5p = 7p

Simplifying and rearranging, we get:

2p = 35

Therefore, the distance from the lens to the object, p, is:

p = 35/2 cm

B. Solving the lens equation, 1/p + 1/q = 1/f, for q, we get:

1/q = 1/f - 1/p

Substituting f = 5 cm, we get:

1/q = 1/5 - 1/p

Multiplying both sides by 5qp, we get:

5p = qp - 5q

Simplifying and rearranging, we get:

q = 5p / (p - 5)

Therefore, the expression that gives q as a function of p is:

q = 5p / (p - 5)

C. Here is a sketch of the graph of q(p):

The graph is a hyperbola with vertical asymptote at p = 5 and horizontal asymptote at q = 5. The image distance q is positive for object distances p greater than 5, which corresponds to a real image. The image distance q is negative for object distances p less than 5, which corresponds to a virtual image.

D. Taking the limit of q as p approaches infinity, we get:

lim q(p) = 5

This represents the horizontal asymptote of the graph. As the object distance becomes very large, the image distance approaches the focal length of the lens, which is 5 cm.

Taking the limit of q as p approaches 5 from the positive side, we get:

lim q(p) = -infinity

This represents the vertical asymptote of the graph. As the object distance approaches the focal length of the lens, the image distance becomes infinitely large, indicating that the lens is no longer able to form a real image.

In order for the lens to form a real image, the object distance p must be greater than the focal length f. When the object distance is less than the focal length, the lens forms a virtual image.

The equation of the line in slope-intercept form is y = -2x + 8 and the equation of the line in standard form is 2x + y = 8.

What is slope-intercept form and standard form of a straight line ?

Slope-intercept form and standard form are two common ways to represent the equation of a straight line in two dimensions.

Slope-intercept form of a line is y = mx + b, where m is the slope of the line, and b is the y-intercept (where the line intersects the y-axis). This form makes it easy to determine the slope and y-intercept of the line from the equation, and to graph the line using those values.

Standard form of a line is Ax + By = C, where A, B, and C are constants, and A and B are not both zero. This form makes it easy to compare the coefficients of x and y, and to determine the x-intercept and y-intercept of the line.

Find the equation of a line passing through a given point and parallel to the given line in slope intercept and standard form :

Given point is (2,4) and line is  6x+3y=3, we first need to determine the slope of the given line. To do this, we can rearrange the equation into slope-intercept form (y = mx + b), where m is the slope:

3y = -6x + 3

y = -2x + 1

The slope of this line is -2.

Since the line we want to find is parallel to this line, it will also have a slope of -2.

We can use the point-slope form of the equation of a line to find the equation of the line passing through (2,4) with slope -2:

y - 4 = -2(x - 2)

Expanding and simplifying, we get:

y - 4 = -2x + 4

y = -2x + 8

This is the equation of the line in slope-intercept form.

To write it in standard form, we can rearrange the equation into the form Ax + By = C:

2x + y = 8

This is the equation of the line in standard form.

Graph of the line -

To know more about slope visit :

brainly.com/question/3605446

#SPJ1

Answer:

Step-by-step explanation:

u got this

(a) T is one-to-one if and only if T carries linearly independent subsets of V onto linearly independent subsets of W.

(b) If T is one-to-one, then S is linearly independent if and only if T(S) is linearly independent.

(c) If β is a basis for V and T is one-to-one and onto, then T(β) is a basis for W.

(a) Assume T is one-to-one. Let S be a linearly independent subset of V, and suppose T(S) is linearly dependent. Then there exist distinct vectors s1, s2, ..., sn in S such that T(s1), T(s2), ..., T(sn) are linearly dependent. This means that there exist scalars c1, c2, ..., cn, not all zero, such that c1T(s1) + c2T(s2) + ... + cnT(sn) = 0. Since T is linear, we have T(c1s1 + c2s2 + ... + cnsn) = 0. But since T is one-to-one, this implies that c1s1 + c2s2 + ... + cnsn = 0, contradicting the assumption that S is linearly independent. Hence, T(S) must be linearly independent.

Conversely, assume that T carries linearly independent subsets of V onto linearly independent subsets of W. Let v1 and v2 be distinct vectors in V, and suppose T(v1) = T(v2). Then {v1, v2} is linearly dependent, which implies that there exist scalars c1 and c2, not both zero, such that c1v1 + c2v2 = 0. Applying T to both sides yields c1T(v1) + c2T(v2) = 0, which implies that T(v1) and T(v2) are linearly dependent. This contradicts the assumption that T carries linearly independent subsets of V onto linearly independent subsets of W. Hence, T must be one-to-one.

(b) Assume T is one-to-one and let S be a subset of V. Suppose S is linearly independent and that T(S) is linearly dependent. Then there exist distinct vectors s1, s2, ..., sn in S such that T(s1), T(s2), ..., T(sn) are linearly dependent. This means that there exist scalars c1, c2, ..., cn, not all zero, such that c1T(s1) + c2T(s2) + ... + cnT(sn) = 0. Since T is linear, we have T(c1s1 + c2s2 + ... + cnsn) = 0. But since T is one-to-one, this implies that c1s1 + c2s2 + ... + cnsn = 0, contradicting the assumption that S is linearly independent. Hence, T(S) must be linearly independent.

Conversely, assume that T(S) is linearly independent whenever S is a linearly independent subset of V. Let v1 and v2 be distinct vectors in V, and suppose T(v1) = T(v2). Then {v1, v2} is linearly dependent, which implies that there exist scalars c1 and c2, not both zero, such that c1v1 + c2v2 = 0. Since {v1, v2} is linearly dependent, we have either v1 = 0 or v2 = 0. Without loss of generality, assume v1 = 0. Then T(v1) = 0 = T(v2), and hence T({v1, v2}) = {0} is linearly dependent. This contradicts the assumption that T carries linearly independent subsets of V onto linearly independent subsets of W. Hence, S must be linearly independent.

(c) First, we will show that T(β) spans W. Let w be an arbitrary vector in W. Since T is onto, there exists some vector v in V such that T(v) = w. Since β is a basis for V, there exist scalars c1, c2, ..., cn such that v = c1v1 + c2v2 + ... + cnvn. Applying T to both sides, we have w = T(v) = T(c1v1 + c2v2 + ... + cnvn) = c1T(v1) + c2T(v2) + ... + cnT(vn), which implies that T(β) spans W.

Next, we will show that T(β) is linearly independent. Suppose there exist scalars c1, c2, ..., cn such that c1T(v1) + c2T(v2) + ... + cnT(vn) = 0. Applying T to both sides, we have T(c1v1 + c2v2 + ... + cnvn) = 0. But since T is one-to-one, this implies that c1v1 + c2v2 + ... + cnvn = 0, which implies that c1 = c2 = ... = cn = 0, since β is a basis for V. Hence, T(β) is linearly independent.

Since T(β) spans W and is linearly independent, it is a basis for W. Therefore, if β is a basis for V and T is one-to-one and onto, then T(β) is a basis for W.

Learn more about linearly independent subsets here

brainly.com/question/14292641

#SPJ4

The value of standard deviation of the stock returns is 10.246%.

The variance or dispersion of a group of data points is measured by standard deviation. Finding the square root of the variance, which is the sum of the squared deviations between each data point and the mean, is how it is determined. In statistics, the term "standard deviation" is used to characterise the distribution of a data collection and to estimate the probability of certain outcomes or events.

The standard deviation is determined using the formula:

√(V).

The mean of the given data is:

(−12 + 10 + 5 − 7 + 3) / 5 = −0.2%

Now, the variance is:

Variance = [ (−12 − (−0.2))² + (10 − (−0.2))² + (5 − (−0.2))² + (−7 − (−0.2))² + (3 − (−0.2))² ] / 5

Variance = 104.96

Now, for standard deviation:

Standard deviation = √(104.96) = 10.246%

Hence, the value of standard deviation of the stock returns is 10.246%.

Learn more about standard deviation here:

https://brainly.com/question/29088233

#SPJ1

Answer:

Math Quotient Verification

G For each ordered pair, determine whether it is a solution to the system of equations. 9x+2y=-5 2x-3y=-8 (x, y) (1, -7) (0, -4) (5,6) (-1,2) Is it a solution? Yes No X 5

To check if an ordered pair is a solution to a system of equations, we substitute the values of x and y into both equations and see if both equations are satisfied.

Let's check each ordered pair one by one:

(1, -7):

9x + 2y = -5 becomes 9(1) + 2(-7) = -5, which is false.

2x - 3y = -8 becomes 2(1) - 3(-7) = -8, which is true.

Therefore, (1, -7) is not a solution to the system of equations.

(0, -4):

9x + 2y = -5 becomes 9(0) + 2(-4) = -8, which is false.

2x - 3y = -8 becomes 2(0) - 3(-4) = 12, which is false.

Therefore, (0, -4) is not a solution to the system of equations.

(5, 6):

9x + 2y = -5 becomes 9(5) + 2(6) = 41, which is false.

2x - 3y = -8 becomes 2(5) - 3(6) = -8, which is true.

Therefore, (5, 6) is not a solution to the system of equations.

(-1, 2):

9x + 2y = -5 becomes 9(-1) + 2(2) = -11, which is false.

2x - 3y = -8 becomes 2(-1) - 3(2) = -8, which is true.

Therefore, (-1, 2) is not a solution to the system of equations.

Therefore, the answer is "No" for all the ordered pairs given in the problem.

(please mark my answer as brainliest)

the temperature in Australia at 11:30 would be 2°C.

How to  find?

We can use a simple formula to calculate the temperature at 11:30 based on the initial temperature and the rate of increase.

Between 8:00 and 12:00, the temperature increases by 2°C every hour, for a total of 4 hours. So the temperature at 12:00 will be:

-5°C + (4 hours x 2°C/hour) = -5°C + 8°C = 3°C

To find the temperature at 11:30, we need to calculate how many hours have passed since 8:00. From 8:00 to 11:00, it has been 3 hours. And from 11:00 to 11:30, it has been an additional 0.5 hours. So, the total time since 8:00 is 3.5 hours.

To find the temperature at 11:30, we can use the same formula as before, but substitute 3.5 for the number of hours:

-5°C + (3.5 hours x 2°C/hour) = -5°C + 7°C = 2°C

Therefore, the temperature in Australia at 11:30 would be 2°C.

To know more about Calculation related questions visit:

https://brainly.com/question/30151794

#SPJ1

By answering the presented question, we may conclude that Sales Rep: expression This entity maintains information about sales reps such as SalesRepID and SalesRepName.

An expression in mathematics is a collection of representations, numbers, and conglomerates that mimic a statistical correlation or regularity. A real number, a mutable, or a mix of the two can be used as an expression. Mathematical operators include addition, subtraction, fast spread, division, and exponentiation. Expressions are often used in arithmetic, mathematic, and form. They are used in the representation of mathematical formulas, the solution of equations, and the simplification of mathematical relationships.

The ER diagram above depicts the database entities and their connections. Here's a quick rundown of each entity and its characteristics:

Employee: This object contains information on employees such as EmployeeID, Name, DateOfBirth, and Dependents.

ProductID, ProductName, ManufacturingDate, ExpiryDate, and SupplierID are all stored in this object.

Supplier: This entity holds supplier-specific information such as SupplierID, SupplierName, ContactPerson, and ContactNumber.

CustomerID, CustomerName, ContactPerson, and ContactNumber are all stored in the Customer entity.

Sales Rep: This entity maintains information about sales reps such as SalesRepID and SalesRepName.

To know more about expression visit :-

https://brainly.com/question/14083225

#SPJ1