Answers
Answer:
for instance when you exercise your muscles increase heat production nudging your body temperature upward.
similarly when you drink a glass of fruit juice your blood glucose goes up
homeostasis depends on that ability of your body to detect and oppose these changes
Related Questions
Briefly describe each of the suns layers. I’ll give brainless
Answers
Answer: The inner layers are the Core, Radiative Zone and Convection Zone.
The outer layers are the Photosphere, the Chromosphere, the Transition Region and the Corona.
Nuclear fusion of hydrogen in the core of the Sun produces tremendous amounts of energy that radiate out from the Sun.
The corona is the outermost layer of the Sun, starting at about 1300 miles (2100 km) above the solar surface (the photosphere). The temperature in the corona is 500,000 K (900,000 degrees F, 500,000 degrees C) or more.
The chromosphere is a layer in the Sun between about 250 miles (400 km) and 1300 miles (2100 km) above the solar surface (the photosphere). The temperature in the chromosphere varies between about 4000 K at the bottom (the so-called temperature minimum) and 8000 K at the top (6700 and 14,000 degrees F, 3700 and 7700 degrees C), so in this layer (and higher layers) it actually gets hotter if you go further away from the Sun, unlike in the lower layers, where it gets hotter if you go closer to the center of the Sun.
The photosphere is the deepest layer of the Sun that we can observe directly. It reaches from the surface visible at the center of the solar disk to about 250 miles (400 km) above that. The temperature in the photosphere varies between about 6500 K at the bottom and 4000 K at the top (11,000 and 6700 degrees F, 6200 and 3700 degrees C)
(phew! There you go!)
in general how are natural resources and population size related
Answers
Answer:
The magnitude of the threat to the ecosystem is linked to human population size and resource use per person. Resource use, waste production and environmental degradation are accelerated by population growth.
What is the mass of water released by the heating? Show your work or explain your reasoning.
Answers
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
Plants are living organisms that respond to stimuli, use resources for energy, grow and develop, are organized by cells, and reproduce. A. true B. false
Answers
Answer:
true
Explanation:
Answer:
b. trueeeeeeeeeeeeeeeeeeeeeeeeeeee
Which of the following describes experiences initiated spontaneously by children as they go about their daily activities?
Naturalistic experiences
Informal learning experiences
Structured learning experiences
Disorganized experiences
Answers
Answer:
naturalistic
Explanation:
The change in water from the solid ice to a liquid is an example of a
Answers
Answer:
When solid ice gains heat, it changes state from solid ice to liquid water in a process called melting. Ice cubes in a cold drink, for example, gradually melt. This process is called evaporation. Water vapor (steam) mixes with the air and seems to disappear.
Answer:
melting
when solid ice gains heat, it changes state from solid ice to liquid water in a process called melting
this is correct answer
I hope it's helpful for u ...
can someone help me ????
Answers
Answer:
B) Lithium
C) Barium
F) Potassium
Explanation:
All of the above are Inorganic Compounds.
Answer:
[tex]\boxed {\boxed {\sf Cobalt, Iron, and \ Copper}}[/tex]
Explanation:
The Stock System states that In a chemical formula or equation, some metals need a roman numeral after their symbol. If a metal has multiple oxidation states, it needs a roman numeral.
Use the Periodic Table to see the oxidation states for each metal.
Cobalt (Co): +3, +2 Lithium (Li): +1 Barium (Ba): +2 Iron (Fe): +3, +2 Copper (Cu): +2, +1 Potassium (K): +1We can see that cobalt, iron, and copper have more than one oxidation state, so they would require a roman numeral.
What is the main function of the part labeled Yin the model?
Answers
Answer:
The part labelled Y is the chloroplast and its main function is to produce food for the plant in the reactions of photosynthesis.
Explanation:
Plants are autotrophic organisms in that they are able to manufacture their own food. Plants are able to manufacture their own food due to the presence of the cell organelle known as the chloroplast. The plant chloroplast has its own DNA and can reproduce independently, from the rest of the cell. They can as well produce amino acids and lipids required for the chloroplast membrane.
Chloroplasts are green-colored membrane-bound organelles found within the plant cell. Their green color is due to the presence of the pigment, chlorophyll. Chlorophyll in the chloroplasts are responsible for absorbing light energy from sunlight and using this absorbed energy to make simple sugars (carbohydrates) from carbon (iv) oxide and water. This is the main function of the chloroplasts in plant cells.
Photosynthesis occurs in the chloroplasts in two reaction steps:
1. The light reaction - involves the splitting of e=water molecules using the energy of sunlight
2. The dark reactions - carbon (iv) oxide from the air is used to produce sugars.
this is the work
I'm rlly confused what should I write?
Answers
Answer:
Q 1: Why did the man get sick but not his children? Why did he use a cube?
Q 2: By knowing how he heated the water and everything we can infer what happened to him and not his children.
Explanation:
Hope this helps! plz mark brainliest <3
Answer:
Ill just comment this for fun So he can get brainliest since u need 2 comments for that
How many moles of water are contained in 0.250 mole
of CuSO4.5H2O?
A) 1.25 B) 4.50 C) 40.0 D) 62.5
Answers
Answer:
C. 40
Explanation:
there are 40 moles of water in a 0.250 mole. use the formula to find out
40.0 = 40.0 + 0
of CuSO4.5H2O?
A) 1.25 B) 4.50 C) 40.0 D) 62.5
c ( 40
o
Plants rely heavily on _______
in the nitrogen cycle to incorporate nitrogen into organic come pounds
1 oxygen
2 viruses
3 bacteria
4 fungi
Answers
Answer:
3. Bacteria
Explanation:
If you don't trust me, search it up!
What effect does pollution have on condensation? A There are more particles in the air for water vapor to cluster around. B Areas with more pollution have more clouds and rain. C Pollution creates more ground level clouds. D It is harder for the sun to warm up the water vapor.
Answers
Answer:
A There are more particles in the air for water vapor to cluster around.
Explanation:
As the condensation process takes place more particles are added to the atmosphere for water vapour and condensation further leads to the build-up of clouds. If the sky is polluted with pollutants the condensation can raise the level of pollution by blocking the rays of the sun from reaching the ground. This affects the visibility of most of the cities.Please help will mark brainliest!! What is the main point of paragraph 3?
Answers
Answer:
the highest frequency
Explanation:
6) Which type of orbital is represented by this image?"
Z,Y,X
Answers
Answer:
the immage is not uploaded
Calculate the pH during the titration of 20.00 mL of 0.1000 M HNO2(aq) with 0.1000 M KOH(aq) after 13.27 mL of the base have been added. Ka of nitrous acid = 7.1 x 10-4.
Answers
Answer:
pH = 2.462.
Explanation:
Hello there!
In this case, according to the reaction between nitrous acid and potassium hydroxide:
[tex]HNO_2+KOH\rightarrow KNO_2+H_2O[/tex]
It is possible to compute the moles of each reactant given their concentrations and volumes:
[tex]n_{HNO_2}=0.02000L*0.1000mol/L=2.000x10^{-3}mol\\\\n_{KOH}=0.1000mol/L*0.01327L=1.327x10^{-3}mol[/tex]
Thus, the resulting moles of nitrous acid after the reaction are:
[tex]n_{HNO_2}=2.000x10^{-3}mol-1.327x10^{-3}mol=6.73x10^{-4}mol[/tex]
So the resulting concentration considering the final volume (20.00mL+13.27mL) is:
[tex][HNO_2]=\frac{6.73x10^{-4}mol}{0.01327L+0.02000L} =0.02023M[/tex]
In such a way, we can write the ionization of this weak acid to obtain:
[tex]HNO_2+H_2O\rightleftharpoons NO_2^-+H_3O^+[/tex]
So we can set up its equilibrium expression to obtain x as the concentration of H3O+:
[tex]Ka=\frac{[NO_2^-][H_3O^+]}{[HNO_2]}\\\\7.1x10^{-4}=\frac{x^2}{0.02023M-x}[/tex]
Next, by solving for the two roots of x, we get:
[tex]x_1=-0.004161M\\\\x_2=0.003451M[/tex]
Whereas the correct value is 0.003451 M. Finally, we compute the resulting pH:
[tex]pH=-log(0.003451)\\\\pH=2.462[/tex]
Best regards!
Revise this statement to make it true:
Running water makes rock edges very sharp and pointy.
NEED HELP NOW PLEASE!! WHOEVER ANSWERS FIRST GETS BRAINIEST!!! No links or I’m reporting your answer.
Answers
Answer:
Running water makes rock edges very dull because of erosion.
Explanation:
hope this helps ^_^
Many ski resorts and mountain cities can be reached directly by planes which deposit travelers a mile or more above sea level. This can result in altitude sickness due to hypoxemia, or reduced oxygen in the blood, caused by the unaccustomed exposure to the lower atmospheric pressure at high elevations. On a given day, the prevailing atmospheric pressure in Albuquerque, NM (elevation 1620 meters) might be 0.799 atm. Calculate this pressure expressed in mmHg and in torr. Relationship between altitude and barometric pressure.
Answers
Answer:
See explanation
Explanation:
To convert from atm to mmHg
1 atm = 760 mmHg
0.799 atm = 0.799 atm * 760 mmHg/1 atm = 607.24 mmHg
To convert from atm to torr
1 atm = 760 torr
0.799 atm = 0.799 atm * 760 torr/1 atm = 607.24 torr
what is the function of a prism
Answers
Answer:
Prisms are sometimes used for the internal reflection at the surfaces rather than for dispersion. If light inside the prism hits one of the surfaces at a sufficiently steep angle, total internal reflection occurs and all of the light is reflected.
Explanation:
Prism, in optics, piece of glass or other transparent material cut with precise angles and plane faces, useful for analyzing and reflecting light. An ordinary triangular prism can separate white light into its constituent colours, called a spectrum.
The water cycle describes the continuous movement of water on earth. Which part of the water cycle is directly responsible for returning water to the soil
Answers
Answer:
mmmh..
Explanation:
sorryy id really ñike to help but i just dont know it...
Explain how an aqueous acidic solution differs from an aqueous basic solution according to the Arrhenius theory for acids and bases
Answers
Answer:
An Arrhenius acid is a substance that associates in water to form hydrogen irons (H+) In other words an acid increases the concentration of H+ ions in an aqueous solution
The theoretical yield of a reaction is 44 g. The actual yield was 34 g. What is the percent
yield?
Answers
Answer:
77%
Explanation:
percent yield is the actual yield divided by the theoretical (predicted) yield, then multiplied by 100 to get a percentage.
34/44 = 0.77
0.77 x 100 = 77%
In ADEF, the measure of F=90°, the measure of ZD=10, and EF = 94 feet. Find the
length of DE to the nearest tenth of a foot.
Answers
Answer:
answer. the measure. is f=90 the equbaliint is 180
Explanation:
yan ang sagot ko
Determine if the following would be a buffer system.
H3PO4 and NaH2PO4
H3PO4 and Na2HPO4
Answers
sorry i dont know Explanation:
Sorry for spamming but this is due tomorrow! Can someone help me please!!
Answers
Answer:
1. in the Northern Hemisphere the vernal equinox falls about March 20 or 21, as the Sun crosses the celestial equator going north. In the Southern Hemisphere the equinox occurs on September 22 or 23, when the Sun moves south across the celestial equator.
Explanation:
Hope this helps ^^
Which is true regarding the density of air?
Answers
helpppppppppppppp!!!!!!!!!!!!!how did chlorine atom attain saturation in potassium chloride and oxygen dichloride
Answers
Which organism is at the base of a marine food web?
A. Crab
B. Phytoplankton
C. Whale
D. Zooplankton
Answers
Dont click on the link
If you are given 608 grams of calcium phosphate Ca3(PO4)2, how many moles would you have? *
Answers
Answer:
You would have 1.96 moles.
Explanation:
You are given 608 grams of calcium phosphate Ca₃(PO₄)₂.
Molar mass (M) is the amount of mass that a substance contains in one mole. This substance can be an element or a compound.
Since the molar mass of the compound Ca₃(PO₄)₂ is 310 g / mole, and taking into account the definition of molar mass, you can apply the following rule of three: if 310 grams of Ca₃(PO₄)₂ are contained in 1 mole, 608 grams of the compound in how many moles are present?
[tex]moles=\frac{608 grams* 1 mole}{310 grams}[/tex]
moles= 1.96
You would have 1.96 moles.
When dissolved in water, all aclds will
Answers
Answer:
when dissolved in water they dissociate in anion and H+ cation.
Explanation:
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge. Bases, on the other hand, mixed with water yield hydroxide ions (OH-).
What is the total number of grams of solute in 500 milliliters of 1M CH3COOH (formula mass = 60)?
Answers
Answer:
30 grams
Explanation:
Molarity of a solution represents its molar concentration, and can be calculated by using the formula as follows:
Molarity (M) = number of moles (n) ÷ volume (V)
Based on the information provided, volume of solution = 500 milliliters, molarity = 1M
Volume of solution in liters = 500mL ÷ 1000 = 0.50L
Molarity = n/V
1 = n/0.50
n = 0.50moles
Using mole = mass/molar mass
Molar mass of CH3COOH (acetic acid) = 60g/mol
Mass = mole × molar mass
mass = 0.50 × 60
mass = 30 grams.