Can someone help me with this one :")

Answer:

-2,802.960 kJ

Explanation:

The dimensional equation of the given quantities is presented as follows;

(6 mol) × (-393.5 kJ/mol) + (6 mol) × (-285.83 kJ/mol) - (1 mol) × (-1,273.02 kJ/mol) = ? kJ

The equation, can be written as follows;

[tex]\left (6 \times (-393.5) \, mol \times \dfrac{kJ}{mol} \right ) + \left(6 \times (-285.83) \, mol \times \dfrac{kJ}{mol} \right) - \left (1 \times (-1,273.02) \, mol \times \dfrac{kJ}{mol} \right) = ?[/tex]We note that [tex]mol \times \dfrac{kJ}{mol} \right) = kJ[/tex], therefore, the above equation becomes;

[tex]\left (6 \times (-393.5) \ kJ\right ) + \left(6 \times (-285.83) \ kJ \right) - \left (1 \, \times (-1,273.02) \ kJ \right) = -2,802.960 kJ[/tex]

Answer:

C. ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)

Explanation:

Got it right on edge.
: the one after is -2803.

Answer:

This is the chemical formula for calcium phosphate:

[tex]Ca_3(PO_4)_2[/tex].

Calculate the mass percent of oxygen in calcium phosphate. Round your answer to the nearest percentage

Explanation:

The molar mass of calcium phosphate is: 310.18g/mol.

In one mole of calcium phosphate there are 8 moles of oxygen atoms.

The atomic mass of oxygen in calcium phosphate is: 128.0 g

Hence, the mass % of oxygen in the given compound is:

[tex]mass% of Oxygen =\frac{mass of oxygen}{mass of calcium phosphate}*100\\&=\frac{128.0g}{310.18g} *100\\&=41.3[/tex]

Hence,mass%of oxygen is 41.3.

Answer:

co + H2 it is the answer may it helpfull

Answer:

d

Explanation:

because CO mixes with H2O

Answer:

False

Explanation:

No, the mass of an electron is not equal to the mass of a neutron. Mass of neutron is greater than the mass of an electron.

Answer: According to the reactivity of metals Sodium is the second metal while Magneesium is the fourth metal. The metal in the top of the reactivity serise table are more reactive.

(The series obtained by the arrangement of metals in the decending oder of their  reactivity is the REACTIVITY SERIES TABLE)

Explanation:

K

Na

Ca

Mg

Al

Zn

Fe

Sn

Pb

H

Cu

Hg

Ag

Pt

Au

Therefore Sodium is more reactive than Magnesium

Answer:

The alkaline-earth metals tend to lose two electrons to form M 2+ ions (Be2+, Mg2+, Ca2+, and so on). These metals are less reactive than the neighboring alkali metal. Magnesium is less active than sodium; calcium is less active than potassium; and so on. These metals become more active as we go down the column.

Answer:

1. Isotope with mass number 39.

2. 39.02g/mol

Explanation:

1. The most common isotope is the isotope in the higher proportion, that is:

Isotope with mass number 39.

2. The average atomic mass is the sum of the masses times their abundance. For the element X:

Average atomic mass:

38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031

= 39.02g/mol

Answer:

it adds to scientific knowledge

Answer: they are held together by hydrogen bonds I believe

Explanation:

The strong bonds exist between water molecules.Because they are held together by hydrogen bonds. Option B is correct.

Hydrogen bonding is a bond between hydrogen atom, but rather a sort of dipole-dipole attraction between molecules.

The attractive force between a hydrogen atom covalently bound to a very electronegative atom such as an N, O, or F atom and another extremely electronegative atom causes it.

The strong bonds exist between water molecules.Because they are held together by hydrogen bonds. Hence,option B is correct.

Hence,option B is correct.

To learn more about hydrogen bond, refer:

https://brainly.com/question/10904296

#SPJ2

Answer:

inhibitor :)

Explanation:

Catalysts speed the reaction up, and the other 2 are essential for the reaction to work, so an inhibitor :)

Answer:

Inhibitor

Explanation:

Answer:

Explanation:

If a substance contains ionic bonds, then it’s properties would include high melting and boiling points, a crystalline structure, the ability to dissolve quite easily in water, the ability to conduct electricity, have good insulation and lastly be quite hard and brittle.

If my answer was helpful, would you consider giving me a “Brainliest”?. Thank you :)

Explanation:

If the iceberg is near the lake and the water molecules melt, then the molecules will slide down. The iceberg could be melting for many reasons - it can be purposely destroyed, the sun could be melting it, or it might naturally fall in. So, this is the answer to your question. Hope it helps!

Answer:

False

Explanation:

It actually decreases.

Answer:

[tex]\boxed {\boxed {\sf SO_3}}[/tex]

Explanation:

An empirical formula shows the smallest whole-number ratio of the atoms in a compound.

So, we must calculate this ratio. Since we are given the amounts of the elements in moles, we can do this in just 2 steps.

The first step is division. We divide the amount of moles for both elements by the smallest amount of moles.

There are 0.300 moles of sulfur and 0.900 moles of oxygen. 0.300 is smaller, so we divide both amounts by 0.300

The next step is writing the formula. We use the numbers we just found as the subscripts. These numbers go after the element's symbol in the formula. Remember sulfur is S and there is 1 mole and oxygen is O and there are 3 moles.

This formula is technically correct, but we typically remove subscripts of 1 because no subscript implies 1 representative unit.

[tex]\bold {The \ empirical \ formula \ for \ the \ compound \ is \ SO_3}}[/tex]

Answer:

In West Africa, garri refers to the creamy granular flour obtained by processing the starchy tuberous roots of freshly harvested cassava. ... Flour foodstuffs mixed with cold or boiled water are a major part of the diet amongst the various ethnicities of Nigeria, Benin Republic, Togo, Ghana, Guinea, Cameroon and Liberia.

Explanation:

Answer:

0.250L of solution. 0.250 moles of solute.

Explanation:

As you can see in the image, there is a beaker with an amount of solution. 1/2L are 500mL and each line of the beaker represents 100mL. That means the volume of the solution is approximately 250mL = 0.250L

Molarity is an unit of concentration defined as the moles of solute per liter of solution. A solution that is 1.000M contains 1.000 moles of solute per liter of solution.

As the volume of the solution is 0.250L, the moles are:

0.250L * (1.000mol/L) = 0.250 moles of solute

Answer:

[tex]10 {7}^{2} = [/tex]

Explanation:

hope it helps

Answer;

P4O10 - molecular solid

Graphite - network solid

Ammonium phosphate - ionic

Brass - metallic

SiC - network solid

Rb- metallic

I2 - molecular

LiBr- ionic

P4 - molecular

Plastic - amorphous

Si - network

Explanation:

An ionic solid is consists of a combination of two oppositely charged ions to yield a crystal lattice such as LiBr.

A covalent solid is one in whom the atoms of the molecule are held together by covalent bonds e.g I2.

Metals are held together by interaction of metal ions and a sea of electrons. This is called the metallic bond. Like SiC

A network solid consists of covalently bonded atoms held together by strong covalent bonds and the molecules in the solid state are held together by a continuous network of atoms.

19. moth balls in the closet and observe after several days.

20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid

21. evaporation, condensation, precipitation

22. it produces new substances

23. vinegar Bubbles when baking soda is added

24. steam

Answer:

Calcium carbonate and hydrochloric acid

Explanation:

The reaction of Calcium carbonate and Hydrochloric acid leads to the formation of Calcium Chloride and Carbon (IV) Oxide gas.

CaCO3 + 2HCl => CaCl2 + CO2 + H2O

Answer:

Matter is made up of many elements

Answer:

matter is made of smallest tiniest invisible particles.

Answer:

A

Explanation:

Answer: so in this question are reactants are calcium hydroxide and ammonium chloride

Explanation: first of all know that a salt would be formed so here the salts present are calcium and chloride so they would react to form the salt calcium chloride, then since ammonium ions are present ammonia gas would be formed then, hydroxide ions (OH) are also present so water would be formed so our final products would be calcium chloride , ammonia and water .

WORD EQUATION

calcium hydroxide+ ammonium chloride⇒ calcium chloride+ ammonia+ water

CHEMICAL EQUATION

CA(OH)2+2NH4CL⇒ CACL2+2NH3+2H2O

Answer:

Neutralization reactions occur when two reactants, an acid and a base, combine to form the products salt and water.

The organ that is used to detect the product of a neutralization reaction is the sense of taste.

When a neutralization reaction occurs between an acid and a base, it results in the formation of a salt and water. The salt produced in the reaction may have a distinct taste, depending on its chemical properties. For example, when hydrochloric acid reacts with sodium hydroxide, the products are sodium chloride and water. Sodium chloride, commonly known as table salt, has a characteristic salty taste.

Similarly, other salts formed from neutralization reactions may have different tastes. For instance, magnesium hydroxide reacting with acetic acid produces magnesium acetate, which has a slightly sweet taste. By using our taste buds, particularly on the tongue, we can detect and identify the taste of the salt formed during a neutralization reaction.

Learn more about Neutralization Reaction here:

https://brainly.com/question/23008798

#SPJ2

Answer:

expande

forman se alejan

Explanation:

Según las leyes de los gases ideales;

La ley de Charles establece que el volumen de una masa dada de gas ideal es directamente proporcional a su temperatura a la presión simultánea.

Esto significa que cuando se calienta una masa dada de gas ideal, el gas se expande y las moléculas de gas se alejan unas de otras de acuerdo con la ley de Charles.

Answer:

B

Explanation:

Exergonic reactions are also called spontaneous reactions, because they can occur without the addition of energy. ... In this case, the products, or final state, have more free energy than the reactants, or initial state. Endergonic reactions are non-spontaneous, meaning that energy must be added before they can proceed.

Exergonic reactions were often known as spontaneous reaction. since they can take place without the expenditure of energy.

A reaction wherein energy is emitted mostly in presence of light or heat was known as just an exothermic reaction.

What is spontaneous reaction?

A spontaneous process would be one that happens without the system receiving any outside input.

Because exergonic events could proceed without the supply of energy, they are sometimes known as spontaneous reactions. The products possess greater free energy as compared to  the reactants example. Endergonic reactions were non-spontaneous, which means they require the addition of energy before they can begin.

To know more about spontaneous reactions and exergonic reactions

https://brainly.com/question/13790391

#SPJ2

Answer:

3.01×10²⁶ molecules

Explanation:

From the question given above, the following data were obtained:

Mass of H₂ = 1 Kg

Number of molecules =?

From Avogadro's hypothesis,

1 mole of H₂ = 6.02×10²³ molecules

But 1 mole of H₂ = 2 × 1 = 2 g

Now, we shall determine the number of molecules present in 1 Kg (i.e 1000 g) of H₂ as follow:

From Avogadro's hypothesis,

2 g of H₂ = 6.02×10²³ molecules

Therefore,

1000 g of H₂ = 1000 × 6.02×10²³ / 2

1000 g of H₂ = 3.01×10²⁶ molecules

Thus, the number of molecules present in 1 Kg (i.e 1000 g) of H₂ is 3.01×10²⁶ molecules