Calculate the volume in milliliters of a 0.595M iron(II) bromide solution that contains 100. g of iron(II) bromide . Round your answer to significant digits.

From the Ksp for Na3PO4, the solubility of the ions is determined to be 27S4. Solubility is a term used in chemistry to describe a substance's capacity to mix with another substance, the solvent.

Na+ and PO4-3 are the ions found in Na3PO4. Since sodium is listed on the periodic table as an alkali metal, it will create a positive charge in solution. A polyatomic ion is one that requires its charge to be remembered, such as the phosphate ion. Therefore, each unit of sodium phosphate that dissolves produces 4 ions. As a result, each molecule of Na3PO4 has a total of four ions in the solution.

Na3PO4 -> 3Na+ + [PO4 3-]

Let the solubility of each ion be S such that

Ksp = [Na+]^3 [(PO4)3-]

Ksp = (3S)^3 (S) = 27S^4 as there are 3 sodium ions and 1 phosphate ion.

To learn more about solubility click here https://brainly.com/question/28170449

#SPJ4

The correct option is: A liquid, because its estimated boiling point is greater than 25°C

A liquid's boiling point is determined by the temperature at which its vapour pressure equals that of the gas above it. The temperature at which a liquid's vapour pressure equals one atmosphere is known as the normal boiling point of that liquid (760 torr).

When a substance's vapour pressure reaches parity with outside pressure, that point is known as its boiling point.

H₂O₂(l) ↔ H₂O₂(g)

ΔH⁰rxn = (ΔH⁰f, H₂O₂(g) - ΔH⁰f, H₂O₂(l))

or, ΔH⁰rxn = (-136.3-(-187.8))

or, ΔH⁰rxn = 51.5 KJ/mol

or, ΔH⁰rxn = (Δs⁰f, H₂O₂(g) - Δs⁰f, H₂O₂(l))

or, ΔH⁰rxn = (233 - 110)

or, ΔH⁰rxn  = 123 J/mol.k

at the boiling point (Tb), ΔG⁰ = 0 (due to equilibrium)

As we know,

ΔG⁰ = ΔH⁰- TΔs⁰

or, 0 = 51.5*10^3 - (T*123)

or, T =  boiling point of H₂O₂

or, T = 418.7 K

or, T   = 418.7 - 273.15 K

or, T = 145.55 °C

As, boiling point of H₂O₂  is higher than room temperature (25°c). it is liquid.

Thus, a liquid, because its estimated boiling point is greater than 25°C.

To know more about boiling point refer to:

https://brainly.com/question/40140

#SPJ4

Ethyne (acetylene) was first discovered in 1836 by the Irish chemist Edmund Davy as a by-product during the medication of metallic potassium by heating an intermixture of calcined potassium tartrate with charcoal.

Carbon dioxide, water, and heat are produced when ethanol burns in the atmosphere with a sooty flame. Together with hydrogen, ethyne first produces ethene and then ethane. 1,2-Tetra halo ethanes are created when ethyne interacts with halogen acids.

Ethyne has the chemical formula C2H2. This substance is an unsaturated hydrocarbon, and in its pure form, it is incredibly unstable. Due to its two carbon atoms, which are triple linked to one another, ethyne is referred to as the most basic alkyne.

All four atoms in the ethyne molecule are aligned in a straight line because it is a linear molecule. The triple bond between carbons is just 1.20 long. In the acetylene hybrid orbital, both carbons are sp- hybridised. 

To learn more about ethyne refer to:

https://brainly.com/question/14668529

#SPJ4

Answer:

Assuming the noise remains constant, the total noise for the longer path length, 65 scans should be 0.0005 x 65 = 0.0325 absorbance units. The new reading should be 0.01 absorbance units. The signal to noise ratio (SNR) of the new measurement will be 0.01/0.0325 = 3.08.

Signal averaging decreases the magnitude of the residual noise and increases the SNR. The total noise decreases by the square root of the number of scans, in this case √65 = 8, so for 65 scans, the noise level is 8 times lower than for a single scan.

The given compound undergoes an E2 elimination reaction to give an alkene.

We observed the following reaction between tert-butyl bromide and cyanide at the beginning of this lesson. This is definitely not a substitution reaction.

(CH3)3C-Br + CN(–) ——> (CH3)2C=CH2 + Br(–) + HCN

We are aware that an SN2 reaction for t-butyl bromide is not anticipated. The ethanol solvent is also insufficiently polar to support an SN1 reaction. Since it is around 10 times weaker than bicarbonate, the other reactant, cyanide anion, is both an excellent nucleophile and a respectable base. The only feasible reaction for this set of reactants, then, appears to be a base-induced elimination.

Methanethiolate is 100 times more nucleophilic than methoxide in the methanol solvent employed here. While methanethiolate is around 106 times more basic than methoxide. As a result, the reaction products exhibit a distinct difference that represents nucleophilicity (bonding to an electrophilic carbon) vs basicity (bonding to a proton).n).

To learn more about E2 mechanism refer to:

brainly.com/question/30215559

#SPJ4

Answer:

wait so do you need help with

Explanation:

The supplied statement states that the pH and S²⁻ in a 0.24M H₂S solution are 3.81 & 3.92 * 10⁻¹², respectively.

A continuous variation of a continuous phase of two and more chemicals in relative proportions up the point that is known as the boundary of solubility. Although concentrations of gases other solids are possible, the term "solution" is most frequently used to refer to the liquid condition of matter. There are many different types of solutions, such as soda water, salt-and-sugar solutions, and others. In a solution, each component resembles a single phase.

Firstly, we have

[tex]$$\begin{aligned}& \mathrm{K} a_1=1.0 \times 10^{-7}=\frac{\left[\mathrm{H}^{+}\right]\left[\mathrm{HS}^{-}\right]}{\left[\mathrm{H}_2 \mathrm{~S}\right]}=\frac{\times_1^2}{0.24} \\& \text { or, } x_1^2=0.24 \times 1.0 \times 10^{-7}=2.4 \times 10^{-8} \\& \text { or, } x_1=1.54 \times 10^{-4} \mathrm{M} \\& \text { i.e, }\left[\mathrm{H}^{+}\right]=\left[\mathrm{HS}^{-}\right]=1.54 \times 10^{-4} \mathrm{~m}\end{aligned}$$[/tex]

Again,

[tex]$$\begin{aligned}& \begin{aligned}k_{a_2}=1.0 \times 10^{-19}= & \frac{\left[\mathrm{H}^{+}\right]\left[\mathrm{S}^{2-}\right]}{\left[\mathrm{HS}^{-}\right]}=\frac{x_2^2}{1.54 \times 10^{-4}} \\\text { or, } x_2^2 & =1.54 \times 10^{-4} \times 1.0 \times 10^{-19} \\& =1.54 \times 10^{-23}=15.4 \times 10^{-24} \\\text { or, } \quad x_2 & =3.92 \times 10^{-12} \\\text { i.e., }\left[\mathrm{H}^{+}\right] & =\left[\mathrm{S}^{2-}\right]=3.92 \times 10^{-12} \mathrm{M}\end{aligned}\end{aligned}$$[/tex]

[tex]$$\text { Total } \begin{aligned}{\left[H^{+}\right] } & =1.54 \times 10^{-4}+3.92 \times 10^{-12} \\& =1.54 \times 10^{-4} \mathrm{~m} \text { (approximated) }\end{aligned}$$[/tex]

Thus, [tex]$p^H=-\log \left(1.54 \times 10^{-4}\right)=3.81$[/tex]

To know more about Solution visit:

https://brainly.com/question/25326161

#SPJ4

To find the number of moles contained in 4.131 x 10^24 particles, we need to use Avogadro's number. Avogadro's number, denoted by N, is the number of atoms, molecules, or other entities in one mole of a substance. It is approximately equal to 6.022 x 10^23.

So, we can use this formula to find the number of moles:

moles = (number of particles) / N

Where N = 6.022 x 10^23

Substituting the given value of particles:

moles = (4.131 x 10^24 particles) / (6.022 x 10^23)

moles = (4.131 x 10^24) / (6.022 x 10^23)

moles = 0.6869

So, 4.131 x 10^24 particles contains approximately 0.6869 moles.

Answer:

Answer Below ↓

Explanation:

If the moving sand hits an obstacle, it stops due to the friction created by the contact and its kinetic energy is then transformed into thermal energy, or heat.

Synthesis is an analysis method that includes the steps of comparing and contrasting, categorising, and dividing.

Comparing and contrasting, categorising, and dividing are all aspects of the analysis technique known as synthesis. Synthesis, at its most fundamental level, is the combination of two or more sources while searching for common themes. Finding connections between disparate materials to support your argument is the goal of synthesis.

2-Methylpropene must be changed into 2-Methyl-2-Propanol using a. H2 O/H+. Using an addition reaction, the alkene will be transformed into the necessary alcohol.

Alkene and water react with an acidic medium to produce alcohols in a process known as acid catalysed hydration. As dictated by Markovnikov's rule, this reaction occurs. An acid catalyst and water combine to generate 2-methylpropan-2-ol from 2-methylpropene.

To learn more about synthesis refer to:

https://brainly.com/question/29608286

#SPJ4

Metals conduct heat faster than air. Air or gas heats up by way of convection, whereas metals are closely packed with one another.

substances that are poor conductors of thermal energy are called thermal insulators. Gases such as air and matter such as plastic Metal and wood are thermal insulators.

Metals and stones are examined as good conductors since they can rapidly transfer heat, whereas materials like wood, paper, air, and cloth are the poor maestros of heat. In particular, metals conduct heat better than non-metals, and solids conduct heat better than gases.

So we can conclude that All metals 'can' flatter a gas. If you heat them in a vacuum, all elemental metals can become a gas

Learn more about metal here: https://brainly.com/question/4701542

#SPJ1

Radical bromination of (S)-3-methylhexane results in 3-bromo-3-methylhexane as the main byproduct, which is optically inactive. The branching hydrocarbon 3-methylhexane has two enantiomers. It belongs to the family of heptane isomers.

One of heptane's two structural isomers, 2,3-dimethylpentane, and this particular molecule both possess the chirality property. They are (R)-3 methylhexane and (S)-3 methylhexane, respectively. Bromomethane is the natural product. This is a substitution process because one of the hydrogen atoms in the methane has been swapped out for a bromine atom. Enantiomers are stereoisomers that cannot be superimposed mirror images of one another. Depending on how each stereocenter is set up, enantiomers are different. In terms of handedness, they can be compared to gloves for the right or left hand.

To find more on stereoisomers  refer here:

https://brainly.com/question/18120547

#SPJ4

Nitrogen fixation does result in the release of energy, but the activation of this reaction takes energy in the form of ATP hydrolysis.

Energy is released during the nitrogen fixation process, although ATP hydrolysis is required to start the reaction. Metallocenzymes, or proteins with metallic molecules as subunits, include nitrogenases.

This type of reaction is known as a reduction reaction because it causes N2 to gain electrons (see equation above). Due to technological challenges biochemists face in actually viewing this reaction in vitro, the precise mechanism of catalysis is unknown, and the precise order of the steps of this reaction is not fully understood.

Despite this, a lot is understood about the process. The equilibrium synthesis of ammonia from molecules of hydrogen and nitrogen has a negative enthalpy of reaction overall, which means it releases energy, but the energy barrier.

To learn more about nitrogen fixation refer to:

https://brainly.com/question/19972090

#SPJ4

The product derived from the acyl portion of propanamide is attached below.

The study of the various spatial arrangements of atoms in molecules is the focus of the branch of chemistry known as stereochemistry. Stereochemistry is the systematic presentation of a particular area of science and technology that customarily necessitates a brief prelude into history.

Because propanamide contains a primary amine group, the carbon centre will become less electrophilic as a result. As a result, resonance structure will form, which will reduce the reactivity of the electrophilic carbon and eliminate the possibility of a high-yield product formation.

To know more about stereochemistry visit:

https://brainly.com/question/13266152

#SPJ4

Na+ channels enter the neuron and increase Vm because the positive Na+ ions are more abundant concentration outside the cell than inside.

The ratio of a constituent's abundance to the total volume of the mixture is its concentration. Mass concentration, molar concentration, number concentration, and volume concentration are a few of the various categories of mathematical description. Information is sent via neurons. Electrical impulses and chemical signals are used to transport information inside different brain areas as well as between the brain and the rest of the nervous system. The two primary subtypes of brain cells are neurons and glial cells. Although they play a supporting role in the brain, glial cells predominate over neurons in numerous areas of the organ.

Learn more about concentration here :

https://brainly.com/question/10725862

#SPJ4

Ions are formed by chemical interactions of accepting or loosing electrons.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.

Learn more about ions,here:

https://brainly.com/question/14982375

#SPJ1

Part - A 164000 molecules of substrate can a molecule of enzyme process in each minute.

Part - B The kcat/KM for the enzyme reaction is  85.416×10⁶ (M.s)⁻¹

An enzyme will attach itself to one or more reactant molecules and start the reaction by catalyzing it. These molecules are the substrates for the enzyme. One substrate may undergo several product breakdowns in some reactions. Others involve the fusion of two substrates into a single larger molecule or the exchange of individual molecules.

The place on an enzyme's surface where substrates bind and the chemical reaction it catalyzes take place is called the active site of the enzyme.

(A)kcat = turnover number

kcat = Vmax/[Etotal] = ( 164×10⁻⁶ (mol/L)min⁻¹ )/(1×10⁻⁹ mol/L)

kcat = 164000 min⁻¹

(B) kcat/kM = ( 164000 min⁻¹ / 32×10⁻⁶M )

kcat/kM = 5125×10⁶ (M.min)⁻¹

kcat/kM  = 85.416×10⁶ (M.s)⁻¹.

To know more about enzyme-catalyzed reaction visit:

https://brainly.com/question/3055518

#SPJ4

A synthesis of 2-bromo-1-butyl-4-nitrobenzene from benzene is Benzene → Nitration → 2-Nitrobenzene → Bromination → 2-Bromo-nitrobenzene → Alkylation → 2-bromo-1-butyl-4-nitrobenzene. The figure is attached below.

The synthesis of 2-bromo-1-butyl-4-nitrobenzene from benzene can be achieved in several steps.

1. Nitration of benzene: Benzene is nitrated by treating it with a mixture of concentrated nitric acid and sulfuric acid, known as fuming nitric acid. This reaction produces nitrobenzene as the main product.

2. Bromination of the Nitrobenzene: Nitrobenzene is then brominated using bromine in the presence of a Lewis acid such as aluminum bromide. This reaction produces 2-bromo-nitrobenzene as the main product.

3. Alkylation of 2-bromo-nitrobenzene: The 2-bromo-nitrobenzene is then alkylated with 1-butyl lithium to give 2-bromo-1-butyl-4-nitrobenzene as the final product.

To know more about benzene please refer: https://brainly.com/question/14525517

#SPJ4

If an enzyme reduces the Ea, the given statement states that the reaction rate will alter seven times.

In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional compounds are known as products. Chemical elements or chemical compounds make up substances.

K1 and K2 are the initial and end rate constants.

Given,

Ea1 - Ea2 = 5 KJ/mol

= 5000J/mol

T = 37 oC

= 310 k

Use,

ln(k2/k1) = (Ea1 - Ea2)/(R*T)

ln(k2/k1) = 5000/(8.314*310)

ln(k2/k1) = 1.94

k2/k1 = 6.96

= 7

Since the rate constant increased by seven.

As a result, the rate has increased by seven times from the beginning.

To know more about Reaction visit:

https://brainly.com/question/25769000

#SPJ4

Answer:

Amino acid alanine

Explanation:

because it is.

Answer:

Without fungi in the forest, dead and rotting materials would not be broken down, which would cause dead plants and animals to pile up in the forest.

Without fungi in the forest, dead and rotting materials would not be broken down. Fungi breaks down materials, and if fungi was not in the forest, the forest would have dead and rotting, plants and animals piled up everywhere.

Explanation: My frog taught me

Doing the test rn and says its right btw!

Hope I helped yall!

The working fluid is the substance to and from which heat is transferred in a heat engine or other cyclic device.

A heat engine is a device that converts heat energy into mechanical energy, and a key component of a heat engine is the working fluid. The working fluid is the substance that is used to transfer heat in and out of the engine.

It is the fluid that is heated and cooled during the process of converting heat into mechanical energy. The working fluid is typically a liquid or gas, and it is chosen based on its ability to efficiently transfer heat, its cost, and its availability.

The working fluid is cycled through the engine, absorbing heat from a high-temperature source, then losing heat to a low-temperature sink, and the process repeats. The working fluid plays a crucial role in the efficiency and performance of the heat engine.

To learn more about the fluid at

https://brainly.com/question/1823632?referrer=searchResults

#SPJ4

In order to make the heat values obtained from the equation q=mCsT equal to one another, we set them to that value. (Specific heat capacity: 0.380 J/g) 57.8 block of copper

Your capacity or the quantity something can hold are both described by the word capacity. You cannot squeeze another feathery companion into a cage that is already overcrowded without risking the claustrophobia of the birds.

Capacity, particularly corporate expansion, unquestionably has a quantifiable impact on every firm. Because it directly affects a company's capacity to expand, compete, and create and maintain a pleasant customer experience, capacity planning is extremely important to business success.

To know more about capacity visit:
https://brainly.com/question/28302909

#SPJ4

Correct me if I'm wrong but from my knowledge:

5, 6, 10, 11, 12, 15, 16, 17, 18, 19, and 20 would be a covalent bond

7, and 8 would be a metallic bond

9, 13, and 14 would be an ionic bond

Answer:

The ozone layer is a layer of the Earth's atmosphere that protects us from the sun's harmful UV radiation.

At long last, change over moles to grams by increase it by the molar mass (0.1017 * 2)= 0.204 grams.

To begin with, you make a proportion between the reactants (H2O & Mg) to decide the restricting reactant so 2 mol H2O/ 1 mol Mg = 2 _calculate moles of Mg (mass/molar mass) = (4.73/24)= 0.197

moles _calculate moles of H2O (mass/molar mass) = (1.83/18)= 0.1017 moles make the proportion once more between H2O & Mg= (0.1017/0.197)= 0.5

So, H2O is the restricting reactant and as you would like the mass of H2 by comparing its moles with moles of H2O, you'll get 0.1017 moles.

Finally, change over moles to grams by duplicate it by the molar mass (0.1017 * 2)= 0.204 grams

To learn more about molar mass here:

https://brainly.com/question/12127540

#SPJ4

B.) cis-1,2-dimethylcylcohexane has two equatorial alkyl substituents in its most stable conformation

In cyclohexane ring, the most stable conformation is the one that has the lowest energy. The ring can adopt different conformations, such as the chair or the boat, depending on the position of the substituents. The most stable conformation of cyclohexane ring is the one that has maximum number of Substituents in equatorial position and minimum number of substituents in axial positions. The equatorial positions are more stable than the axial positions because they are farther apart and less crowded.In option B, cis-1,2-dimethylcylcohexane, the methyl groups are in equatorial positions, which makes it the most stable conformation among the options given.

Learn more about alkyl substituents here:

https://brainly.com/question/28170014

#SPJ4

The indicated bonds in decreasing order of wavenumber is E. IV > II > V > I > III

Atoms, molecules, or ions can enter a liquid or solid material by a process known as absorption, which can be physical or chemical in nature.

The order of absorption of the indicated bonds in decreasing order of wavenumber is IV > II > V > I > III.

This order is based on the strength of the bond and the functional group associated with it.

The order of the absorption of functional groups are typically based on the polarity and electron density of the bond.

In general, the more polar and electron-rich the bond, the higher the wavenumber of its absorption.

To know more about Atoms visit: brainly.com/question/1566330

#SPJ4

The "alum" used in cooking is potassium aluminum sulfate hydrate, KAl(SO4)2·x H2O and the value of x calculated is 12.

Alum is a type of chemical compound, usually hydrated double sulfate salt of aluminum having general formula X Al ₂·12 H ₂O, where X is  monovalent cation such as potassium or ammonium.

Given mass of KAl(SO₄)₂.XH₂O = 4.74 g

and mass of water = 2.16 g

So, mass of KAl(SO₄)₂ = 4.74 – 2.16 = 2.58 g

Molar mass of KAl(SO₄)₂ ;

= 39 + 27 + 2[32 + (4×26)]

Now, molar mass of KAl(SO₄)₂ = 258 g/mol

Molar mass of H₂O ;

= (2×1) + 16

Now, molar mass of H₂O = 18 g/mol

Hence, KAl(SO₄)₂ = 2.58 / 258 = 0.01

and H₂O = 2.16 / 18 = 0.12

KAl(SO₄)₂ = 0.01 / 0.01 = 1

H₂O = 0.12 / 0.01 = 12

The formula of the compound is obtained as KAl(SO₄)₂.12H₂O

Comparing KAl(SO₄)₂.12H₂O with KAl(SO₄)₂.XH₂O,  value of X is 12.

To know more about potassium aluminum sulfate hydrate, refer

https://brainly.com/question/5961763

#SPJ1

The internal pressure of the container will increase, given that the temperature of the confined gas increases from 10 °C to 30 °C (Option B)

To determine if the pressure will decrease, increase or remain the same, we shall obtain the new pressure of the container. Details below

The following data were obtained from the question:

P₁V₁ / T₁ = P₂V₂ / T₂

Volume = contant

P₁ / T₁ = P₂ / T₂

P / 283 = P₂ / 303

Cross multiply

P₂ × 283 = P × 303

Divide both sides by 283

P₂ = (P × 303) / 283

P₂ = 1.07 × P

From the above calculation, we can see that the new pressure is 1.07 times the initial pressure.

Thus, we can conclude that the internal pressure will increase (Option B)

Learn more about pressure:

https://brainly.com/question/15343985

#SPJ1

Complete question:

A 100.-milliliter sample of helium gas is placed in a sealed container of fixed volume. As the temp of the confined gas increases from 10°c to 30°c, the internal pressure

A. Decreases

B. Increases

C. Remain the same