Calculate the molar mass of BaSO4. ?

The stoichiometric ratio between the 20 mg band reactant and the  Product hydrogen gas is 1:1/2, simply 2:1. This means that 2 atoms of hydrogen are produced for every 1 atom of zinc consumed in the reaction.

What is Stoichiometric Coefficient?

A stoichiometric coefficient is a number that appears in front of a chemical species in a balanced chemical equation, representing the number of moles of that species that react or are produced in the reaction. These coefficients are used to ensure that the law of conservation of mass is obeyed in a chemical reaction, and that the same number and types of atoms are present on both sides of the equation.

The reaction used to determine the molar volume of a gas is typically the reaction between a metal and an acid to produce hydrogen gas, which is collected and measured. The stoichiometric ratio between the reactants and products in this reaction is:

metal + acid → salt + hydrogen gas

The balanced chemical equation for the reaction between zinc metal and hydrochloric acid is:

Zn + 2 HCl → ZnCl2 + H2

From this equation, we can see that 1 mole of zinc reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas. The molar mass of zinc is 65.38 g/mol, which means that 1 mole of zinc has a mass of 65.38 g. Therefore, 20 mg (0.02 g) of zinc is equivalent to:

0.02 g / 65.38 g/mol = 3.06 x 10^-4 moles of zinc

According to the stoichiometry of the reaction, 1 mole of zinc reacts with 1/2 mole of hydrogen gas. Therefore, the amount of hydrogen gas produced from 3.06 x 10^-4 moles of zinc is:

1/2 x 3.06 x 10^-4 moles = 1.53 x 10^-4 moles of hydrogen gas

So the stoichiometric ratio between the 20 mg band reactant and the product hydrogen gas is 1:1/2, or simply 2:1. This means that 2 atoms of hydrogen are produced for every 1 atom of zinc consumed in the reaction.

Learn more about  Stoichiometric Coefficient from given link

https://brainly.com/question/6666875

#SPJ4

Calcium carbonate( [tex]CaCO_{3}[/tex] )appears as white, odorless powder or colorless crystals. Practically insoluble in water.

[tex]CaCO_{3}[/tex] is the chemical formula for calcium carbonate, an inorganic substance. Calcite is another name for it. It is located in the earth's crust. It comes in a wide variety of shapes, including marble and limestone. It is a non-toxic, odourless gas that is typically found as a white mineral in marbles, chalks, and limestones. Eggshells, seashells, oyster shells, snail shells, corals, etc. all contain this chemical as their primary ingredient.

Strong ionic substance that contains calcium carbonate. The atoms are bound together very tightly because of the extremely strong electrostatic force of attraction. It becomes challenging to sever the bonds because of how powerful these attractions are. When calcium carbonate is dissolved in water, this is what happens.

Bonds being very strong do not break, leading to calcium carbonate being insoluble in water. Moreover ionization of calcium carbonate is not taking place in water. And so calcium carbonate is insoluble in water.

know more about soluble in water click here;

https://brainly.com/question/29857840

#SPJ4

The molecular geometry of silicon dioxide is linear and bonding in it  is covalent due to which it is a suitable material for making welding blankets.

Molecular geometry is  defined as a three -dimensional arrangement of atoms which make up  the molecule.It includes parameters such as bond length,bond angle and torsional angles.

It influences many properties of molecule such as reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.

Learn more about molecular geometry,here:

https://brainly.com/question/28557524

#SPJ9

Here's a table that classifies the objects based on their physical properties:

Object            Property

Rubber bands   Elasticity

Wood chips    Hardness

Straight pins    Sharpness

Aluminum foil    Malleability

Glass beads   Smoothness

Physical properties are characteristics that describe the basic nature of an object, such as its shape, size, texture, and other observable features, without reference to its composition.

The physical properties listed in the table are just a few examples of the ways in which these objects can be described and classified based on their physical characteristics.

Learn more about Physical properties at:

https://brainly.com/question/11445521

#SPJ1

The Cis isomers are the molecules with the same connectivity of the atoms. The Trans isomers is the molecules with the same side of the groups placed on the opposite sides of the double bond.

The Cis isomers are the molecules that have the same connectivity of the atoms. The feature is the same side of the groups placed on the same side of the double bond. The  Trans isomers are the the molecules with same side of the groups placed on the opposite sides of the double bond.

Cis isomers are almost the polar compound. The Trans isomers are not the very polar one. Many of the trans isomers are the  non-polar molecules.

To learn more isomers here

https://brainly.com/question/12796779

#SPJ4

To dilute the 0.200 M HCl solution to 0.150 M solution, 166.67 mL of water is needed to be added to the solution.

To dilute a solution, we can use the dilution equation:

M₁V₁ = M₂V₂

where M₁ and V₁ are the initial molarity and volume of the solution, and M₂ and V₂ are the final molarity and volume of the solution after dilution.

In this case, we are given M₁ = 0.200 M, V₁ = 500 mL, and M₂ = 0.150 M. We need to solve for V₂ to find the final volume of the solution after dilution, and then subtract V₁ from V₂ to find the amount of water that needs to be added.

0.200 M × 500 mL = 0.150 M × V₂

V₂ = (0.200 M × 500 mL) / 0.150 M

V₂ = 666.67 mL

So, the final volume of the solution after dilution should be 666.67 mL.

To find the amount of water that needs to be added, we can subtract the initial volume from the final volume:

666.67 mL - 500 mL = 166.67 mL

Therefore, we need to add 166.67 mL of water to the 500 mL of 0.200 M HCl solution to dilute it to a 0.150 M solution.

Learn more about dilution here: https://brainly.com/question/24881505.

#SPJ11

Each different signal in a 1H NMR spectrum represents a different chemical environment of hydrogen atom. Hydrogen atoms that are in the same chemical environment or have the same electronic and structural environment give the same signal in the NMR spectrum.

Write a note on this phenomenon of the NMR spectrum.

This is because the resonance frequency of a hydrogen nucleus is affected by the local magnetic field, which in turn is influenced by the electronic and structural properties of the molecule surrounding the hydrogen atom. By analyzing the number, intensity, and splitting pattern of the signals in the 1H NMR spectrum, it is possible to obtain valuable information about the structure and composition of a molecule or compound.

Hence, the answer is, Each different signal in a 1H NMR spectrum represents a different chemical environment of hydrogen atom. Hydrogen atoms that are in the same chemical environment or have the same electronic and structural environment give the same signal in the NMR spectrum.

To learn more about 1H NMR spectrum, follow the link:

https://brainly.com/question/29389817

#SPJ4

The internal energy change for this reaction is +1730 J.

What is internal energy?

Internal energy is the total energy contained within a system, including the kinetic and potential energies of its particles (atoms, molecules, ions, etc.). It is a state function that depends only on the current state of the system, including its temperature, pressure, volume, and composition.

The internal energy change (ΔU) for this reaction can be calculated using the first law of thermodynamics:

ΔU = Q - W

where Q is the heat released to the surroundings, and W is the work done by the gases.

Substituting the given values, we get:

ΔU = 2290 J - 560 J

ΔU = 1730 J

Therefore, the internal energy change for this reaction is +1730 J.

To learn more about internal energy:

https://brainly.com/question/17136958

#SPJ4

The bonds connecting adjacent nucleotides in a nucleic acid is called phosphodiester bond.

The phosphodiester bond is the connection between two nucleotides that follow one another within the same DNA strand. Deoxyribose in DNA and ribose in RNA form the phosphodiester bond, which connects the 3' carbon atom of one sugar molecule to the 5' carbon atom of another.

The 3', 5' phosphodiester linkage is specifically formed by the phosphodiester connection between the 3' carbon atom of one sugar molecule and the 5' carbon atom of another. These saccharide groups come from ribose and deoxyribose, which are found in both DNA and RNA.

Within each strand, the nucleotides are joined by covalent bonds.

To know about nucleotide

https://brainly.com/question/967810

#SPJ4

Answer:

the answer is D.

Explanation:

Sucrose is long, straight-chain type of starch that makes up about 20% of digestible starch.

Sucrose, a disaccharide, is a sugar made out of glucose and fructose subunits. It is created normally in plants and is the primary constituent of white sugar. It has the atomic equation C₁₂H₂₂O₁₁.

For human utilization, sucrose is extricated and refined from one or the other sugarcane or sugar beet. Sugar plants - commonly situated in tropical districts close where sugarcane is developed - squash the stick and produce crude sugar which is delivered to different production lines for refining into unadulterated sucrose. Sugar beet production lines are situated in mild environments where the beet is developed, and process the beets straightforwardly into refined sugar.

Starch or amylum is a polymeric sugar comprising of various glucose units joined by α- - D glycosidic bonds. This polysaccharide is delivered by most green plants for energy capacity. Around the world, it is the most considered normal starch in human weight control plans, and is contained in huge sums in staple food sources like wheat, potatoes, maize, rice, and cassava.

To know more about sucrose,visit here:

https://brainly.com/question/28869238

#SPJ4

The compound's molar mass is expressed in gram per mole, or g/mol.

One mole of a specific chemical or material has a mass of 1 molar. The compound's molar mass in the unit called gram per mole, or g/mol.

Avoid mixing up the terms molecular weight and molar mass of the material. The two are not equivalent. The atomic weight of each atom in a particular molecule adds up to make up the compound's mass, while the molar mass is the result of multiplying the molecule's weight by the number of moles in the compound.

To know more about molar mass, visit,

https://brainly.com/question/30459969#:~:text=Expert%2DVerified%20Answer&text=Molar%20mass%20is%20the%20mass,grams%20of%20pure%20carbon%2D12.

#SPJ4

The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glyceryl phthalate, or GP for short.

GP is a condensation polymer that is formed by the reaction of glycerol and phthalic anhydride. The reaction involves the formation of ester bonds between the hydroxyl groups of glycerol and the carboxylic acid groups of phthalic anhydride. The resulting polymer has good flexibility, softness, and low toxicity, which make it useful for certain applications, such as in the production of plasticizers for PVC.

However, glyceryl phthalate is not as widely used as other polyesters like polyethylene terephthalate (PET), which is formed from the reaction of ethylene glycol and terephthalic acid, and has much broader applications.

To know more about the phthalic anhydride, here

brainly.com/question/12972518

#SPJ4

The generic name of the ativan is the Lorazepam .

The Ativan, also called as by the generic name that is lorazepam, it is a type of the medication called as the benzodiazepine. The Benzodiazepines is helps by the increasing the activity of the neurotransmitter called as the GABA in the brain, that helps to reduce the anxiety and the it promote relaxation.

The intravenous form of the lorazepam is used to treat the seizures.  The Lorazepam is in the class of the drugs called as the benzodiazepines. The Ativan is the benzodiazepine that is used to treat the the depression.

To learn more about ativan here

https://brainly.com/question/30397644

#SPJ4

1) The theoretical yield is 18.02 g

2) The percent yield is 67%

3) The percent yield is  55.8 %

The balanced reaction equation is;

N2 + 3H2 ----> 2NH3

Number of moles of N2 = 15g/28 g/mol = 0.53 moles

If 1 moles of N2 produced 2 moles of NH3

0.53 moles of N2 will produce 0.53 * 2/1

= 1.06 moles

Theoretical yield = 1.06 moles * 17 g/mol

= 18.02 g

The percent yield = 12.1/18.02 * 100/1

= 67%

The percent yield = 19.8 g/35.5 g * 100/1

= 55.8 % as shown

Learn more about theoretical yield:https://brainly.com/question/14966377

#SPJ1

The unit conversion helps to calculate the one mole quantity in milimoles. It will contain thousands of milimoles.

A mole is the amount of a substance of a system that contains as many elementary entities as there are atoms in 0.012 kilograms of carbon 12; its symbol is "mole." The SI prefix "mili" represents a factor of 10⁻³ or, in exponential notation, 1E⁻³. So 1 millimole = 10⁻³ moles. Both are different units of the same quantity. A unit conversion used to express the same property as other units of measurement. A conversion factor, which is a number, is used to convert a quantity from one unit to another. The conversion formula for converting millimoles to 1 mole is written as : millimole = moles / 1000

This means that one millimole contains 10⁻³ moles. Therefore, one mole contains 1000 millimoles.

For more information about unit conversion, visit :

https://brainly.com/question/13016491

#SPJ4

A pseudo first order experiment is a kinetic study in which the concentration of one of the reactants is varied in such a way that the reaction rate appears to be first order with respect to that reactant.

Some of the characteristics of a pseudo first order experiment are:

1. Limiting reactant: The concentration of one reactant is much higher than the other reactants, and the reaction rate is determined by the rate-limiting step, which involves this limiting reactant.

2.Concentration change: The concentration of the limiting reactant is changed during the reaction and monitored over time, while the concentration of the other reactants remains constant.

3.Rate expression: The reaction rate is proportional to the concentration of the limiting reactant, which results in a first-order rate expression.

4.Reaction order: The reaction appears to be first order with respect to the limiting reactant, but the overall reaction order may be different.

5.Application: Pseudo first order experiments are used to determine the rate-limiting step in complex reactions and to study the effect of reaction conditions on the rate of a reaction.

To learn more about Pseudo first order :

https://brainly.com/question/29306067

#SPJ4

Transition is associated with the greatest energy change is n=1 to n=3  As you get to higher energy shells, the difference between becomes smaller.

To learn more about energy shells refer to:

https://brainly.com/question/1370081

#SPJ4

The correct answer is:

A) 1 > 3 > 4 > 2

(Aromatic 1 is the most reactive towards electrophilic substitution, while aromatic 2 is the least reactive.)

The relative reactivity of aromatic compounds towards electrophilic substitution is determined by their ability to stabilize the positive charge that is formed during the reaction. This stability is influenced by several factors, including the number and position of electron-donating or electron-withdrawing substituents on the ring, as well as the overall aromaticity of the ring.

Aromatic 1 has an electron-donating -NH2 group, which increases the electron density on the ring and makes it more reactive towards electrophiles. Aromatic 3 has an electron-withdrawing -NO2 group, which decreases the electron density on the ring and makes it less reactive towards electrophiles than Aromatic 1, but still more reactive than Aromatics 2 and 4. Aromatic 4 has an electron-withdrawing -COOH group, which also decreases the electron density on the ring and makes it less reactive towards electrophiles than Aromatics 1 and 3. Aromatic 2 has no substituents and is the least reactive of the four.

for more questions on electrophilic substitution-

https://brainly.com/question/14803468

#SPJ4

Answer:There are three subatomic particles: protons, neutrons and electrons. Two of the subatomic particles have electrical charges: protons have a positive charge while electrons have a negative charge. Neutrons, on the other hand, don't have a charge.

Explanation:

The Ser is an amino acid that participates in the chymotrypsin mechanism's nucleophilic assault.

To learn more about amino acid refer to:

https://brainly.com/question/24106148

#SPJ4

The empirical formula of oxalic acid is CHO₂. The molecular mass is 90 g/mol. Then, its molecular formula is C₂H₂O₄.

The empirical formula of a compound is derived from the number of moles of each element present and converting their ratio of number of moles into whole numbers.

The molecular formula is derived by dividing the molecular mass by the formula mass and multiply the empirical formula with the obtained integer.

Given mass  of carbon =1.94 g

no.of moles = 1.94/12 = 0.161

mass of H = 0.160

no.of moles  = 0.160

mass of oxygen = 5.16 g

no.of moles = 5.16 g/16 = 0.322

Now, divide the ratio by 0.160 to convert them to whole numbers, we get the empirical formula CHO₂.

Given molar mass = 90 g/mol

Formula mass = 12 + 1 + 32  = 45 g

then, 90/45 = 2

multiply the formula mass by 2 we get the molecular formula, C₂H₂O₄.

Find more on molecular formula:

brainly.com/question/28647690

#SPJ9

Four of the valencies on the tetrahedron of carbon point in the directions of its four angles. The tetrahedron's core is made up of carbon atoms. Each valency has a 10928′ bond angle.

To learn more about carbon atom refer to:

https://brainly.com/question/27860158

#SPJ4

The presence of a lone pair on the oxygen atom makes OH a good leaving group.

A good leaving group is a molecular fragment that can depart from the substrate without undergoing rearrangement or reacting further. In general, the ability of a group to act as a leaving group depends on its stability after leaving. The stability of a leaving group is often enhanced by the inductive and resonance effects of nearby functional groups.

In the case of OH, its lone pair can act as a nucleophile and participate in reactions, but it can also be delocalized via resonance with the adjacent atoms. However, upon protonation, the O-H bond becomes polarized and the oxygen atom becomes a better leaving group.

To know more about the OH, here

https://brainly.com/question/2911201

#SPJ4

The 1.375 g sample of sugar found seaweed, is burned completely in oxygen to give 1.993 g of carbon dioxide and 0.9519 g of water . The empirical formula of this sugar  is C₃H₇O₃.

Moles of the C in the carbon dioxide = 1 ( 1.933/ 44)

Moles of the  C in the carbon dioxide = 0.0453 mol

Moles of the H in the water = 2 ( 0.9519 / 18 )

Moles of the H in the water = 0.106 mol

Mass of the oxygen = 1.375 - (0.0453 ×12 ) - 0.016 × 1

Mass of the oxygen = 0.724 g

The moles of the oxygen = mass / molar mass

                                          = 0.724 / 160

                                           = 0.0453 mol

Dividing by the smallest one , we get :

C = 1

H = 2.3

O = 1

Multiplying by three , we get :

The empirical formula is C₃H₇O₃.

To learn more about empirical formula here

https://brainly.com/question/14044066

#SPJ4

Proton A couples to Proton B. Proton A posseses a J -value of 3.0 Hz. What do you expect the J -value Proton B posseses to be 3.0 Hz. The correct answer is D.

In freely rotating groups, protons in anti-conformation have a frequency range of J= 5–12 Hz while those in gauche conformation have a range of J= 2-4 Hz. Option D is correct as a result.

The J value of a quartet may always be determined by counting the distances between the various lines. When working with actual data, it is preferable to utilize the average line spacing, which is determined by dividing the distance between the first and last lines by three.

The coupling constant, usually denoted as J, is used to calculate the strength of the interaction between a pair of protons in an atom.

It is designated by the letter "J" with frequency units and is mostly used to measure the interaction or strength of the splitting effect (Hz).

In the simplest case, the coupling constant for a doublet is equal to the difference between its two peaks.

As a result, Proton B has a J-value of 3.0 Hz.

Your question is in complete but most probably your full question was

Proton A couples to Proton B. Proton A posseses a J-value of 3.0 Hz. What do you expect the J-value Proton B posseses to be? a) Less than 3.0 Hz b) Greater than 3.0 Hz c) No J-value because coupling is only one-way d) 3.0 Hz

Learn more about Proton here:

brainly.com/question/1252435

#SPJ4

The prefix that is added to the word autotroph to denote organisms which can use inorganic compounds in the environment to fix carbon dioxide with hydrogen atoms to make organic molecules is: "chemo-"

As per the question given,  

Have you ever wondered how some organisms survive in extreme environments where sunlight is scarce or absent? Well, there are certain organisms called autotrophs that are capable of producing their own food using inorganic substances through the process of photosynthesis. However, some autotrophs have taken it a step further and developed a unique ability to use inorganic compounds in their environment to produce organic molecules.

This process is known as chemosynthesis, and it is vital for the survival of certain organisms in environments like deep-sea hydrothermal vents, where sunlight cannot penetrate. The prefix that is added to the word autotroph to denote these organisms is "chemo-", which signifies the use of energy from inorganic chemical reactions instead of light energy. Chemoautotrophs are truly fascinating organisms that have adapted to survive in some of the harshest environments on our planet!

For such more questions on Atoms

https://brainly.com/question/6258301

#SPJ4

Answer:

water molecules

Explanation:

Osmosis is the movement of water molecules from a solution of higher concentration to a solution of lower concentration.

Hope it helps..

To select the appropriate pipette for each of the following volumes are P1000,  P20, P200, microsyringe.

A. 874 uL (microliters) - A P1000 pipette would be appropriate for this volume. P1000 pipettes can dispense volumes ranging from 100 μL to 1000 μL.

B. 57 uL (microliters) - A P20 pipette would be appropriate for this volume. P20 pipettes can dispense volumes ranging from 2 μL to 20 μL.

C. 340 uL (microliters) - A P1000 pipette or a P200 pipette would be appropriate for this volume. P1000 pipettes can dispense volumes ranging from 100 μL to 1000 μL, and P200 pipettes can dispense volumes ranging from 20 μL to 200 μL. Since the volume is closer to 200 μL, a P200 pipette might be more appropriate in this case.

D. 15 pL (picoliters) - A microsyringe with a nanoliter or picoliter volume range would be appropriate for this volume. Microliter syringes are not appropriate for volumes in the picoliter range. The appropriate syringe size would depend on the accuracy and precision required for the experiment.

To know more about pipette here

https://brainly.com/question/28522043

#SPJ4

To calculate the number of moles of salicylic acid, you need to know the mass of the sample and the molar mass of the compound.

The molar mass of salicylic acid (C7H6O3) is the sum of the atomic masses of all the atoms in the compound, which can be calculated using the periodic table of elements. The molar mass of the salicylic acid is:

(7 x 12.01 g/mol) + (6 x 1.01 g/mol) + (3 x 16.00 g/mol) = 138.12 g/mol

Once you have the molar mass of salicylic acid, you can use the following formula to calculate the number of moles:

Number of moles = Mass of sample (in grams) / Molar mass (in grams per mole)

For example, if you have a sample of salicylic acid that weighs 1.5 grams, you can calculate the number of moles as follows:

Number of moles = 1.5 g / 138.12 g/mol = 0.0109 moles

Therefore, the sample contains 0.0109 moles of salicylic acid.

To know more about moles here

https://brainly.com/question/26416088

#SPJ4