calculate the fraction condensed and the degree of polymerization at t = 5.00 h of a polymer formed by a stepwise process with kr = 1.39 dm3 and an initial monomer concentration of 10.0 mmol dm−3

Explanation:

There is a well-known relationship between the bond length of a diatomic molecule and the atomic radius of its constituent atoms, known as the covalent radius. Specifically, the covalent radius of an atom is half the bond length between two identical atoms in a diatomic molecule.

Therefore, to determine the atomic radius of chlorine (Cl), we can use the bond length of fluorine (F2) and the fact that the two atoms in F2 are identical.

Since the bond length of F2 is given as 1.28 A, the covalent radius of fluorine is 1.28/2 = 0.64 A.

Since both fluorine and chlorine are halogens, they have similar electronic configurations and form similar covalent bonds. Therefore, we can use the covalent radius of fluorine as an estimate for the covalent radius of chlorine.

Thus, the atomic radius of chlorine is approximately 0.64 A.



Rank the bonds in each set in order of increasing bond length and increasing bond strength: (a) C≡N, C≡O, C≡C; (b) P-I, P-F, P-Br. And Rank the bonds in each set in order of decreasing bond length and decreasing bond strength: (a) Si-F, Si-C, Si-O; (b) N=N, N-N, N≡N

ChatGPT

(a) C≡C < C≡N < C≡O (increasing bond length); C≡O < C≡N < C≡C (increasing bond strength)

Explanation: In a series of molecules with the same central atom, the bond length decreases as the number of bonds between the central atom and the surrounding atoms increases. Therefore, in set (a), the C≡C bond is the shortest, followed by the C≡N bond, and then the C≡O bond. Similarly, the bond strength increases with the number of bonds between the central atom and the surrounding atoms. Therefore, the C≡C bond is the strongest, followed by the C≡N bond, and then the C≡O bond.

(b) P-F < P-Br < P-I (increasing bond length); P-I < P-Br < P-F (increasing bond strength)

Explanation: In a series of molecules with the same surrounding atom, the bond length increases as the central atom gets larger. Therefore, in set (b), the P-I bond is the longest, followed by the P-Br bond, and then the P-F bond. Similarly, the bond strength decreases as the central atom gets larger. Therefore, the P-I bond is the weakest, followed by the P-Br bond, and then the P-F bond.

(c) Si-O < Si-C < Si-F (decreasing bond length); Si-F < Si-C < Si-O (decreasing bond strength)

Explanation: In a series of molecules with the same central atom, the bond length increases as the electronegativity of the surrounding atom increases. Therefore, in set (c), the Si-F bond is the longest, followed by the Si-C bond, and then the Si-O bond. Similarly, the bond strength decreases as the electronegativity of the surrounding atom increases. Therefore, the Si-F bond is the weakest, followed by the Si-C bond, and then the Si-O bond.

(d) N≡N < N-N < N=N (decreasing bond length); N≡N > N-N > N=N (decreasing bond strength)

Explanation: In a series of molecules with the same central atom, the bond length decreases as the number of bonds between the central atom and the surrounding atoms increases. Therefore, in set (d), the N≡N bond is the shortest, followed by the N-N bond, and then the N=N bond. Similarly, the bond strength increases with the number of bonds between the central atom and the surrounding atoms. Therefore, the N≡N bond is the strongest, followed by the N-N bond, and then the N=N bond.

1.(a) In order of increasing bond length: C≡N, C≡C, C≡O and In order of increasing bond strength: C≡O, C≡C, C≡N and (b) In order of increasing bond length: P-F, P-Br, P-I and In order of increasing bond strength: P-I, P-Br, P-F. 2. (a) In order of decreasing bond length: Si-F, Si-O, Si-C and In order of decreasing bond strength: Si-O, Si-C, Si-F and (b) In order of decreasing bond length: N≡N, N=N, N-N and In order of decreasing bond strength: N≡N, N=N, N-N.

1. (a) This is because nitrogen is smaller than carbon, so the triple bond is shorter and stronger. Carbon-oxygen bonds are typically shorter and stronger than carbon-carbon bonds, so C≡O is shorter and stronger than C≡C. In order of increasing bond strength the order is  P-I, P-Br, P-F because oxygen is more electronegative than carbon, so the carbon-oxygen bond is more polar and stronger.

(b) The bond length order is so because fluorine is smaller than bromine or iodine, so the bond is shorter and stronger. and the bond strength order is so because iodine is larger than fluorine or bromine, so the bond is weaker and longer.

2. (a) This is because fluorine is smaller than oxygen, so the bond is shorter and stronger. Oxygen is smaller than carbon, so the bond is shorter and stronger. In order of decreasing bond strength the order is Si-O, Si-C, Si-F because oxygen is more electronegative than carbon, so the carbon-oxygen bond is more polar and stronger. Fluorine is more electronegative than carbon, so the carbon-fluorine bond is more polar and stronger.

(b) The bond length order is so because the triple bond is shorter and stronger than the double bond, which is shorter and stronger than the single bond and the bond strength order is so because the triple bond is stronger than the double bond, which is stronger than the single bond.

To know more about bond strength, refer here:

https://brainly.com/question/30226871#

#SPJ11

Without access to the specific data and worksheet, write a function in cell B5 of the specified worksheet. You would need to analyze the data and perform the necessary calculations based on the provided criteria to determine the number of orders that meet the specified conditions.

To determine the number of orders that were shipped to the West region and included a Washington football team jersey, you would need access to the relevant data that tracks orders, shipments, and item details.

This data would typically be stored in a database or spreadsheet.

You would need to identify the column or field that specifies the region and another column or field that indicates the item or product in each order.

By filtering or querying the data based on the West region and the Washington football team jersey, you can count the number of matching orders.

Once you have the relevant data and the necessary tools (such as Excel or a database management system), you can write a formula or query to obtain the desired count.

The specific approach may vary depending on the structure of your data and the tools you are using.

If you have the data available, please provide more details, such as the structure of your data and the specific columns or fields related to regions and items.

With that information, I can guide you further in formulating the necessary function or query to answer your question.

Learn more about specified worksheet

brainly.com/question/31936169

#SPJ11

The estimated total Kjeldahl nitrogen (TKN) associated with a sample having 50 mg/l of cell tissue and 10 mg/l of ammonia is approximately 77.5 mg/l.

To calculate the TKN, the contribution of the organic nitrogen in the cell tissue (which is 13.7 mg/l, calculated as 50 mg/l x 0.27, where 0.27 is the percentage of organic nitrogen in c5h7o2n) is added to the ammonia concentration. Therefore, TKN = 10 mg/l (ammonia) + 13.7 mg/l (organic nitrogen) = 23.7 mg/l x 3.27 (the conversion factor from total nitrogen to TKN) = 77.5 mg/l.

TKN is an important parameter in water quality analysis, as it represents the total nitrogen present in the sample that can contribute to eutrophication and other environmental issues. This calculation assumes that all nitrogen in the cell tissue is organic, which may not always be the case. Therefore, this estimate should be used as a rough approximation and more accurate analysis should be conducted if needed.

Learn more about nitrogen here:

https://brainly.com/question/16711904

#SPJ11

A normal human heart pumps approximately 7,776 liters of blood in one day.

To calculate the liters of blood pumped in one day, you need to determine the total blood pumped per minute and then convert that amount to liters per day.

Given that 75 mL of blood is pumped at each beat, and there are 72 beats per minute, you can calculate the blood pumped per minute:

75 mL/beat * 72 beats/minute = 5,400 mL/minute

Now, you need to convert mL to liters (1,000 mL = 1 L) and calculate the blood pumped per day (1 day = 1,440 minutes):

5,400 mL/minute * (1 L / 1,000 mL) * 1,440 minutes/day = 7,776 L/day

So, a normal human heart pumps approximately 7,776 liters of blood in one day.

To learn more about blood, refer below:

https://brainly.com/question/26557101

#SPJ11

Benzene is a planar molecule with a delocalized π electron system. This means that the electrons are distributed over the entire molecule and there is no localized π bond. As a result, the substituent group can bond to any of the six carbon atoms in the ring and the electrons will be delocalized throughout the entire ring. Therefore, there is no directionality for a substituent group coming off of benzene. This is why benzene is often used as a reference molecule in organic chemistry.
Hi! I'd be happy to help you with your question. In reference to the benzene model, there is no directionality for a substituent group coming off of benzene because of the following reasons:

1. Benzene is a planar, hexagonal molecule with six carbon atoms connected by alternating single and double bonds.
2. The carbon atoms in benzene are sp2 hybridized, which means that they have three hybrid orbitals (one for each of the three sigma bonds with adjacent carbon atoms and hydrogen) and one unhybridized p orbital.
3. The p orbitals of adjacent carbon atoms overlap to form a delocalized pi electron cloud above and below the plane of the benzene ring. This delocalized pi cloud is responsible for the aromatic character and stability of benzene.
4. Since the electrons in the pi cloud are delocalized, there is no localized double bond or single bond in benzene. This means that when a substituent group is attached to a carbon atom in benzene, it doesn't change the electron density in any specific direction, resulting in a lack of directionality for the substituent group.

In summary, there is no directionality for a substituent group coming off of benzene because of its planar structure, sp2 hybridization, and the delocalization of pi electrons throughout the ring.

There is no directionality for a substituent group coming off of benzene because the delocalized electrons create a uniform electron distribution around the ring. This causes the substituent group to interact with the entire benzene ring rather than a specific carbon atom, leading to the lack of directionality for the substituent group.

The reason why there is no directionality for a substituent group coming off of benzene is due to the delocalization of electrons within the benzene ring. The six carbon atoms in the ring are sp2 hybridized, which means they have three electron domains arranged in a trigonal planar geometry. This allows for the formation of a pi-bond system, where the p orbitals of each carbon atom overlap to create a continuous ring of electron density.
This delocalized pi-bond system is responsible for the unique properties of benzene, including its stability and lack of reactivity towards electrophilic attack.
The electrons in the pi-bond system are delocalized, there is no specific location or orientation for the substituent group to interact with. Unlike in a typical alkane or alkene molecule, where the substituent group is attached to a specific carbon atom with a defined spatial orientation, in benzene the substituent group can interact with any of the carbon atoms in the ring. This lack of directionality is due to the symmetrical nature of the pi-bond system and the delocalization of electrons throughout the ring.
The delocalized pi-bond system in benzene is responsible for the lack of directionality for a substituent group coming off of the ring. Because the pi-electrons are spread out across the ring, the substituent group can interact with any carbon atom in the ring without a specific orientation or location.
Benzene is an aromatic compound with a planar, hexagonal ring structure consisting of alternating single and double carbon-carbon bonds. Due to its resonance structure, the electrons in the double bonds are delocalized over the entire ring, resulting in evenly distributed electron density.

To know more about electron visit:-

https://brainly.com/question/12001116

#SPJ11

The equilibrium constant Kp for the reaction is [tex]1.34 \times 10^{26}[/tex].

The standard enthalpy change for the given reaction is ΔH° = [tex]-483.6 $ kJ[/tex].

To calculate the following quantities, we will need the standard entropy values:

The standard free energy change ΔG° for the reaction can be calculated using the following equation:

ΔG° = ΔH° - TΔS°

where

At 298 K, we have:

Therefore, the standard free energy change ΔG° for the reaction is [tex]-415.6 $ kJ/mol[/tex].

The equilibrium constant Kp for the reaction can be calculated using the following equation:

ΔG° = -RT ln Kp

where

At 298 K, we have:

[tex]Kp = e^{(ln Kp)} = e^{(60.49)} = 1.34 \times 10^{26}[/tex]

Therefore, the equilibrium constant Kp for the reaction is [tex]1.34 \times 10^{26}[/tex].

Learn more about equilibrium constant: brainly.com/question/3159758

#SPJ11

In the given reaction, RSH is being oxidized to form RSSR, while I3− is being reduced to form I−.

The reaction equation you are referring to is:

2 RSH + I3⁻ → RSSR + 3 I⁻

In this reaction, the oxidation and reduction processes are as follows:

Oxidation: RSH loses a hydrogen atom and forms a bond with another RSH molecule to create RSSR.
Reduction: I3⁻ gains an electron and breaks down into three I⁻ ions.

So, the correct answer is:
a. RSH is oxidized; I3⁻ is reduced.

For more questions on oxidation:

https://brainly.com/question/13182308

#SPJ11

a. RSH is oxidized; I3− is reduced. In the given reaction equation,

RSH (thiol) is being oxidized to form RSSR (disulfide), and I3− (triiodide ion) is being reduced to form I− (iodide ion). Oxidation involves the loss of electrons, while reduction involves the gain of electrons. In this reaction, RSH is losing two electrons to form a disulfide bond, while I3− is gaining two electrons to form I−. Therefore, RSH is being oxidized, and I3− is being reduced. Hence, option a is the correct answer.

Learn more about Oxidation here:

https://brainly.com/question/9496279

#SPJ11

1 mole is equal to 6. 022 x 10 23 particles, which is also known as the Avogadro's constant. To compute the amount of moles of any material in the sample, just divide the substance's stated weight by its molar mass.

we first need to determine which reactant is limiting and which is in excess. We can do this by using the mole ratio from the balanced chemical equation:

3 CuO + 2 Al --> 3 Cu + Al2O3

For every 2 moles of Al that react, 1 mole of Al2O3 is produced. Therefore, the maximum number of moles of Al2O3 that can form is:

(3.47 moles Al) / (2 moles Al per 1 mole Al2O3) = 1.735 moles Al2O3

However, we also need to consider the amount of CuO available. For every 3 moles of CuO that react, 1 mole of Al2O3 is produced. Therefore, the maximum number of moles of Al2O3 that can form based on the amount of CuO available is:

(6.04 moles CuO) / (3 moles CuO per 1 mole Al2O3) = 2.013 moles Al2O3

Since we can only produce as much Al2O3 as the limiting reactant allows, the actual yield of Al2O3 will be the smaller of the two values calculated above, which is 1.735 moles Al2O3. Therefore, the answer is e. 1.74 moles.

To solve this problem, we'll use the stoichiometry of the balanced chemical equation: 3 CuO + 2 Al → 3 Cu + Al2O3.

Given: 3.47 moles of Al and 6.04 moles of CuO.

First, determine the number of moles of Al2O3 that can form from Al:
(3.47 moles Al) x (1 mole Al2O3 / 2 moles Al) = 1.735 moles Al2O3

Next, determine the number of moles of Al2O3 that can form from CuO:
(6.04 moles CuO) x (1 mole Al2O3 / 3 moles CuO) = 2.013 moles Al2O3

Since the number of moles of Al2O3 formed from Al (1.735 moles) is less than the number of moles of Al2O3 formed from CuO (2.013 moles), Al is the limiting reactant. Therefore, the maximum number of moles of Al2O3 that can form is 1.735 moles (rounded to 1.74 moles).

Your answer: e. 1.74 moles

To know about moles visit:

https://brainly.com/question/31597231

#SPJ11

The most soluble of these compounds is methanoic acid. This is due to its smaller molecular size and ability to form stronger hydrogen bonds with water molecules compared to ethanoic acid and pentanoic acid.

Methanoic acid has only one carbon atom and a carboxylic acid functional group, allowing it to readily interact with water molecules through hydrogen bonding. Ethanoic acid has a longer carbon chain and a weaker hydrogen bonding ability, while pentanoic acid has an even longer carbon chain and is less soluble due to its large molecular size.

In addition, the smaller size of methanoic acid allows it to dissolve more easily in water and form a more stable solution due to its ability to interact more closely with water molecules, leading to higher solubility compared to the other two acids.

To know more about the methanoic acid refer here :

https://brainly.com/question/29587812#

#SPJ11

The molecular equation that would give this net ionic equation is PQ-18. H+(aq) + OH-(aq) → H2O(l).

The net ionic equation represents the chemical reaction that occurs when only the essential species involved in the reaction are shown, omitting spectator ions.

In this case, the net ionic equation is H+(aq) + OH-(aq) → H2O(l), where the hydrogen ion (H+) and hydroxide ion (OH-) combine to form water (H2O).

To determine the molecular equation that gives rise to this net ionic equation, we need to consider the balancing of charges and the formation of water as the final product.

By examining the reaction, we can deduce that the molecular equation PQ-18. H+(aq) + OH-(aq) → H2O(l) would produce this net ionic equation.

Learn more about ionic equations

brainly.com/question/28208725

#SPJ11

The balanced equation for the reaction of calcium with water, including the missing product in molecular form, is:

2Ca + 2H₂O → 2Ca(OH)₂ + H₂

In this reaction, calcium (Ca) reacts with water (H₂O) to form calcium hydroxide (Ca(OH)₂) and hydrogen gas (H₂). The coefficients in front of the reactants and products indicate the stoichiometric ratio, showing that 2 moles of calcium react with 2 moles of water to produce 2 moles of calcium hydroxide and 1 mole of hydrogen gas.

The reaction between calcium and water is a redox reaction, where calcium gets oxidized and water gets reduced. Calcium hydroxide is formed as a result, and hydrogen gas is released. This reaction is highly exothermic and can produce a vigorous release of hydrogen gas.

Learn more about the reaction of calcium with water here:

https://brainly.com/question/10928759?referrer=searchResults

#SPJ11

The theory stating that the cation is surrounded by a sea of mobile electrons is related to MX compounds.

In MX compounds, the cation (M) is typically a metal atom, and the anion (X) is typically a non-metal atom. The theory being referred to is known as the "metallic bonding" theory. According to this theory, in MX compounds, the metal cation loses one or more electrons to form a positively charged ion. These cations are then surrounded by a sea of mobile electrons that are delocalized and not associated with any specific atom. This sea of electrons is responsible for the metallic properties observed in MX compounds, such as high electrical and thermal conductivity, malleability, and ductility.

To learn more about metal cation click here : brainly.com/question/8098159

#SPJ11

Thymolphthalein is an acid-base indicator that changes color at a certain pH range. Its Ka is 7.9 x 10^-11, which means it is a weak acid. Thymolphthalein changes color when it is in the basic form, and the pH range for this color change can be determined by calculating the pKa value.

The pKa of thymolphthalein is approximately 10.1, which means that the pH range for the color change is within one unit above and below the pKa value.

Therefore, the pH range for the color change of thymolphthalein is approximately 9.1 to 11.1. In this pH range, the indicator will change from colorless to blue, indicating the presence of a base.

To know more about the Thymolphthalein refer here :

https://brainly.com/question/9278100#

#SPJ11

The molarity of the CuCO₃ solution made by dissolving 0.3 mole of CuCO₃ in 120 mL of water is 2.5 M

Molarity is defined as the amount of solute in 1 L of solution. It is written as

Molarity = mole / volume

With the above formula, we can obtain the molarity of the CuCO₃  solution. Details below:

Molarity of solution = mole / volume

Molarity of solution = 0.3 / 0.12

Molarity of solution = 2.5 M

Thus, we can conclude that the molarity of the solution is 2.5 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

Replace E° with the value you measured and calculate the Gibbs free energy change, ΔG°.  To calculate the Gibbs free energy (ΔG°) for the cell you constructed, we'll use the following equation: ΔG° = -nFE°

To calculate δg° for the cell of Cu/C12H22CuO14 and Sn/CuSO4, we first need to use the Nernst equation to find the standard cell potential (E°cell) for this reaction. The Nernst equation relates the cell potential to the Gibbs free energy change (δG) and the standard cell potential: E°cell = -δG°/nF + E°red,  The standard reduction potentials (E°red) for the two half-reactions involved in the cell are: Cu2+ + 2e- -> Cu (s) E°red = +0.34 V, Sn2+ + 2e- -> Sn (s) E°red = -0.14 V
E°cell = -0.83 V
E°cell = -δG°/nF + E°red
-1.17 V = -δG°/(2*96,485 C/mol)
δG° = 2*96,485 C/mol * 1.17 V

δG° = -224.44 kJ/mol
The standard Gibbs free energy change for the cell reaction is -224.44 kJ/mol. This value is negative, which means that the reaction is spontaneous under standard conditions (at 25°C, 1 atm, and with concentrations of 1 M for all species). The units for δG° are kJ/mol.

To know more about Gibbs visit :-

https://brainly.com/question/13795204

#SPJ11

161 mg of sodium borohydride should be added for the reduction of 163 mg of 4-t-butylcyclohexanone.

To determine the mass of sodium borohydride required for the reduction of 163 mg of 4-t-butylcyclohexanone, we first need to calculate the number of moles of 4-t-butylcyclohexanone.
Using the formula weight of 4-t-butylcyclohexanone (154.25 g/mol), we can calculate that 163 mg is equal to 0.00106 moles.
Next, we need to determine the stoichiometry of the reaction between 4-t-butylcyclohexanone and sodium borohydride. The balanced equation is:
4-t-butylcyclohexanone + 4 NaBH4 → 4-t-butylcyclohexanol + 4 NaBO2 + B2H6
From the equation, we can see that for every mole of 4-t-butylcyclohexanone, we need four moles of sodium borohydride. Therefore, we need 0.00425 moles of sodium borohydride for the reduction of 163 mg of 4-t-butylcyclohexanone.
Finally, using the molar mass of sodium borohydride (37.83 g/mol), we can calculate the mass of sodium borohydride needed:
mass of NaBH4 = 0.00425 moles × 37.83 g/mol = 0.161 g or 161 mg
Therefore, 161 mg of sodium borohydride should be added for the reduction of 163 mg of 4-t-butylcyclohexanone.

To know more about Molar mass visit:

https://brainly.com/question/22997914

#SPJ11

We are given the following information:
- The silver atom is oscillating in simple harmonic motion
- Frequency of oscillation = 10^12 Hz
- Mole weight of silver = 108 g/mol
- Avogadro's number = 6.02 × 10^23 atoms/mol

First, let's find the mass of a single silver atom:
mass of one atom = (Mole weight of silver) / (Avogadro's number)
mass of one atom = (108 g/mol) / (6.02 × 10^23 atoms/mol) = 1.79 × 10^-22 g

Now we can convert the mass to kg:
mass of one atom = 1.79 × 10^-22 g × (1 kg / 1000 g) = 1.79 × 10^-25 kg

In simple harmonic motion, the angular frequency (ω) can be related to the given frequency (f) as follows:
ω = 2πf
ω = 2π(10^12 Hz) = 6.283 × 10^12 rad/s

The force constant (k) can be related to the mass (m) and angular frequency (ω) using the formula:
k = mω^2

Now, plug in the values for mass and angular frequency:
k = (1.79 × 10^-25 kg) × (6.283 × 10^12 rad/s)^2 = 706.6 N/m

So, the force constant of the bonds connecting one silver atom with the other is approximately 706.6 N/m.

To know more about force constant visit: https://brainly.com/question/15170479

#SPJ11

The 30-kg kid would need to run at a speed of approximately 6.53 m/s to have the same kinetic energy as an 8.0-g bullet fired at 400 m/s.

To find the speed of the 30-kg kid, we can use the equation for kinetic energy:

[tex]K = 1/2 mv^2[/tex]

where K is the kinetic energy, m is the mass, and v is the velocity.

For the bullet, K = 1/2 (0.008 kg) (400 m/s)^2 = 640 J

To find the speed of the kid with the same kinetic energy, we set the kinetic energy of the kid equal to 640 J and solve for v:

[tex]K = 1/2 mv^2\\640 J = 1/2 (30 kg) v^2\\v^2 = (2 * 640 J) / 30 kg\\v^2 = 42.67 m^2/s^2\\v = sqrt(42.67) m/s\\\\v = 6.53 m/s[/tex]

Therefore, the 30-kg kid would need to run at a speed of approximately 6.53 m/s to have the same kinetic energy as an 8.0-g bullet fired at 400 m/s.

Learn more about Speed

brainly.com/question/15837674

#SPJ

Polyurethane foam is a common material used for insulation in coolers, but the thickness of the foam can vary depending on the manufacturer and type of cooler.

Here are some additional points to consider regarding the thickness of polyurethane foam in coolers:

Generally, the thickness of the foam insulation in coolers can range from 1 inch to 2.5 inches.

Learn More About coolers

https://brainly.com/question/20889972

#SPJ11

The compound CaCO3, also known as calcium carbonate, contains both ionic and covalent bonds. Therefore, the correct answer is I and II, as both ionic and polar covalent bonds are present in CaCO3.

The correct option is E.

The bond between calcium and carbonate is ionic, as calcium is a metal and carbonate is a polyatomic ion with a negative charge.

The bonds between the atoms within the carbonate ion (carbon and three oxygen atoms) are covalent.

These covalent bonds can be further classified as polar covalent bonds, as the oxygen atoms have a higher electronegativity than carbon and therefore attract the shared electrons more strongly, creating partial charges on the molecule.

To know more about calcium carbonate refer here :-

https://brainly.com/question/14707927#

#SPJ11

Element M reacts with nitrogen to form compound [tex]M_3N_2[/tex]with a mass of 43.5g. The name of element M is magnesium.

Based on the information provided, the compound [tex]M_3N_2[/tex]is formed when element M reacts with nitrogen. The subscript "3" in the formula indicates that three atoms of element M combine with two atoms of nitrogen.

To determine the name of element M, we need to refer to the periodic table and find an element that can combine with nitrogen to form [tex]M_3N_2[/tex]. By looking at the periodic table, we can identify that the element with the symbol M should have a molar mass that corresponds to the given mass of 43.5g. Comparing the molar masses of elements, we find that the element with the symbol M is magnesium (Mg). Therefore, the name of element M is magnesium.

Learn more about magnesium here:

https://brainly.com/question/8351050

#SPJ11

Answer: A 1000 times more

Explanation:

there are 1000 micro grams in 1 milligram.

If you were given a dose of 500 mg instead of 500 µg of a drug, you received 1000 times more of the drug.

If you were given a dose of 500 mg instead of 500 µg, you received 1000 times more of the drug. This is because 1 mg is equal to 1000 µg, so 500 mg is 500,000 µg. Therefore, you received 1000 times more of the drug than the intended dose.

https://brainly.com/question/33443595

#SPJ2

The reaction between hydrochloric acid (HCl) and toluene in the presence of a catalyst such as [tex]AlCl_3[/tex] can lead to the formation of two major organic products.

Here 2-Chlorotoluene: This compound is a chlorinated derivative of toluene and has the molecular formula [tex]C_6H_5CH_2Cl.[/tex] It can be represented by the following structure: 1-Chloro-2-methylbenzene: This compound is a chlorinated derivative of a methylbenzene and has the molecular formula [tex]C_6H_4ClCH_3[/tex]. It can be represented by the following below structure.

It's important to note that the reaction between HCl and toluene can also produce other, minor organic products such as 2-bromotoluene and 2-chloro-4-methylbenzene. However, the major products in this reaction are 2-chlorotoluene and 1-chloro-2-methylbenzene.  

Learn more about organic products visit: brainly.com/question/20820642

#SPJ4

The final volume of the blimp, when cooled at constant pressure from 30°C to -38°C, is approximately 1,548.5 L.

To solve this problem, we can use the combined gas law, which relates the initial and final temperatures and volumes of a gas at constant pressure. The combined gas law can be expressed as:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₁ and V₁ are the initial pressure and volume, T₁ is the initial temperature, P₂ and V₂ are the final pressure and volume, and T₂ is the final temperature.

In this case, the initial volume is given as 2,000 L, the initial temperature is 30°C (which we will convert to Kelvin by adding 273.15), and the final temperature is -38°C (also converted to Kelvin).

We need to find the final volume, and we are told that the pressure remains constant. Therefore, the equation becomes:

(P₁)(2,000 L)/(30 + 273.15 K) = (P₂)(V₂)/(-38 + 273.15 K)

Simplifying the equation, we have:

(2,000 L)/(303.15 K) = (P₂)(V₂)/(235.15 K)

To find the final volume, we multiply both sides of the equation by (235.15 K):

V₂ = (2,000 L)(235.15 K)/(303.15 K)

V₂ ≈ 1,548.5 L

For more such questions on  constant pressure visit:

https://brainly.com/question/26696262

#SPJ11

The binding energy of the 70Br atom is 556.56 MeV per atom. The binding energy of an atom is the amount of energy required to completely separate all of its constituent particles (protons and neutrons) from one another.

To calculate the binding energy, we use Einstein's equation E=mc², where E is energy, m is mass, and c is the speed of light. The mass defect, Δm, is the difference between the actual mass of the atom and the sum of the masses of its constituent particles: vΔm = m - Zmp - Nmn. Where m is the actual mass of the atom, Z is the atomic number (number of protons), mp is the mass of a proton, N is the number of neutrons, and mn is the mass of a neutron.

For the 70Br atom, the atomic number Z is 35, the mass of a proton mp is 1.007825 amu, the mass of a neutron mn is 1.008665 amu, and the actual mass of the atom is 69.944793 amu. Thus, the mass defect is:

Δm = 69.944793 amu - 35(1.007825 amu) - 35(1.008665 amu) = 0.620238 amu

The binding energy BE is then:

BE = Δm c² / A

where A is the mass number (the sum of the number of protons and neutrons), and c is the speed of light (c = 2.998 x 10⁸ m/s). To convert amu to kilograms, we use the conversion factor 1 amu = 1.6605 x 10⁻²⁷ kg.

A = 70

c = 2.998 x 10⁸ m/s

1 amu = 1.6605 x 10⁻²⁷ kg

BE = (0.620238 amu)(1.6605 x 10⁻²⁷ kg/amu)(2.998 x 10⁸ m/s)² / (70)(1.602 x 10⁻¹³ J/MeV) = 556.56 MeV

Therefore, the binding energy of the 70Br atom is 556.56 MeV per atom.

For more questions like atom visit the link below:

https://brainly.com/question/14047930

#SPJ11

The value of Kc for the reaction 2S(g) + 3O₂(g) ⇌ 2SO₃(g) is 4.4 × 10⁻⁴.

The equilibrium constant, Kc, can be calculated by the formula:

Kc = [SO₃]² / ([S]²[O₂]³)

Where [S], [O₂], and [SO₃] are the molar concentrations of S, O₂, and SO₃ at equilibrium, respectively.

Substituting the given equilibrium concentrations into the equation gives:

Kc = (0.95 mol/L)² / [(0.70 mol/L)² (1.3 mol/L)³]

Kc = 0.9025 / 2.2343 = 4.4 × 10⁻⁴

Therefore, the Kc is 4.4 × 10⁻⁴. This indicates that the reaction favors the reactants at equilibrium, as Kc is much less than 1.

To know more about equilibrium constant, refer here:

https://brainly.com/question/29253884#

#SPJ11

the answer is  0.0312 M .To determine the iodide ion concentration in a solution, we need to use the formula: molarity = moles of solute / liters of solution

First, we need to calculate the number of moles of CaI2 in the solution. We can do this by using the molar mass of CaI2, which is:
CaI2 = 40.08 + 2(126.9) = 293.88 g/mol
So, the number of moles of CaI2 is:
moles of CaI2 = mass of CaI2 / molar mass of CaI2
moles of CaI2 = 12.6 g / 293.88 g/mol
moles of CaI2 = 0.0428 mol
Since CaI2 dissociates in water to form three ions (one Ca2+ ion and two I- ions), the number of moles of iodide ions (I-) is twice the number of moles of CaI2:
moles of I- = 2 × moles of CaI2
moles of I- = 2 × 0.0428 mol
moles of I- = 0.0856 mol
Now, we need to convert the volume of the solution from milliliters to liters:
liters of solution = 2750 mL / 1000 mL/L
liters of solution = 2.75 L
Finally, we can calculate the molarity of iodide ions:
molarity = moles of I- / liters of solution
molarity = 0.0856 mol / 2.75 L
molarity = 0.0312 M
Therefore, the iodide ion concentration (in molarity) in the given solution is 0.0312 M.

To know more about concentration visit :-

https://brainly.com/question/6335300

#SPJ11

Each nucleus of chromium-49 releases approximately 3.91 MeV.

Given:

Amount of chromium-49 = 3.50 × [tex]10^{(-3)[/tex] mol

Energy released = 8.11 × [tex]10^5[/tex] kJ

To find the energy released per nucleus, we need to convert the given energy from kilojoules (kJ) to electron volts (eV) and then to megaelectron volts (MeV).

1. Convert the given energy from kilojoules (kJ) to joules (J):

1 kJ = 1000 J

Energy released = 8.11 × [tex]10^5[/tex] kJ = 8.11 × [tex]10^8[/tex] J

2. Convert the energy from joules (J) to electron volts (eV):

1 eV = 1.602 × [tex]10^{(-19)[/tex] J

Energy released in eV = (8.11 × [tex]10^8[/tex] J) / (1.602 × [tex]10^{(-19)[/tex] J/eV) = 5.07 × [tex]10^2^7[/tex] eV

3. Convert the energy from electron volts (eV) to megaelectron volts (MeV):

1 MeV = [tex]10^6[/tex] eV

Energy released in MeV = (5.07 × [tex]10^2^7[/tex] eV) / ([tex]10^6[/tex] eV/MeV) = 5.07 × [tex]10^2^1[/tex] MeV

4. Calculate the energy released per nucleus:

To find the energy released per nucleus, we need to divide the total energy released by the number of nuclei.

Number of chromium-49 nuclei = Avogadro's number × amount of chromium-49 in moles

Avogadro's number = 6.022 × [tex]10^{23[/tex] mol^(-1)

Number of nuclei = (6.022 × [tex]10^2^3[/tex] mol^(-1)) × (3.50 × [tex]10^{(-3)[/tex]mol) = 2.107 × [tex]10^2^1[/tex] nuclei

Energy released per nucleus = (5.07 × [tex]10^2^1[/tex] MeV) / (2.107 × [tex]10^{21[/tex] nuclei) = 3.91 MeV.

For more such questions on nucleus, click on:

https://brainly.com/question/1370081

#SPJ11

The energy released by the given amount of chromium-49 is converted to MeV per nucleus using the conversion factor.

The first step is to calculate the total number of nuclei in 3.50 x [tex]10^{-3}[/tex] mol of chromium-49. This can be done using Avogadro's number (6.02 x [tex]10^{23}[/tex]nuclei/mol).

n = (3.50 x [tex]10^{-3}[/tex] mol) x (6.02 x [tex]10^{23}[/tex] nuclei/mol) = 2.107 x [tex]10^{21}[/tex] nuclei

Next, the energy released in joules needs to be converted to MeV using the conversion factor: 1 MeV = 1.602 x [tex]10^{-13}[/tex] J.

8.11 x [tex]10^{5}[/tex] J = (8.11 x [tex]10^{5}[/tex] J) x (1 MeV / 1.602 x[tex]10^{-13}[/tex] J) = 5.064 x [tex]10^{12}[/tex] MeV

Finally, the MeV per nucleus can be calculated by dividing the total energy by the number of nuclei:

MeV/nucleus = (5.064 x [tex]10^{12}[/tex] MeV) / (2.107 x [tex]10^{12}[/tex] nuclei) = 2.407 MeV/nucleus (rounded to three significant figures).

Therefore, the energy released by each nucleus of chromium-49 is approximately 2.407 MeV.

Learn more about Avogadro's number here :

https://brainly.com/question/28812626

#SPJ11

The primary structure of a protein is most important because the sequencing of the amino acids determines its overall shape, function and properties.

The primary structure of a protein refers to the linear sequence of amino acids joined by peptide bonds. This sequence determines the arrangement of the protein's secondary and tertiary structures, which ultimately determine its overall shape, function, and properties.

The twisting and folding of the protein's secondary and tertiary structures are also important for its function, but they are dependent on the primary structure. Therefore, the primary structure is the most important factor in determining a protein's properties. Option B is the correct answer.

Learn more about protein here:

https://brainly.com/question/29776206

#SPJ11

The statement  "The mobile phase used during the tlc analysis of dipeptide experiment was silica gel" is false because the mobile phase used during the TLC analysis of the dipeptide experiment could have been silica gel, but this would be unlikely as silica gel is a stationary phase in TLC.

In TLC, the stationary phase is a thin layer of silica gel or other adsorbent material on a flat, inert support, such as a glass plate, and the mobile phase is a solvent that moves through the stationary phase by capillary action. The dipeptide mixture would be applied as a small spot to the stationary phase, and the plate would be developed by allowing the mobile phase to move up the plate, carrying the components of the mixture with it.

Depending on the polarity of the dipeptide and the solvent used as the mobile phase, different adsorbent materials could be used as the stationary phase, including silica gel, alumina, or cellulose.

To know more about the dipeptide experiment refer here :

https://brainly.com/question/31359102#

#SPJ11

The concentration of the reaction B after one half-life is 0.25 M. The correct option is A.

The half-life of a second-order reaction is given by the equation t1/2 = 1 / (k [A]₀), where k is the rate constant, [A]₀ is the initial concentration of reactant A, and t1/2 is the time it takes for [A] to decrease to half of its initial concentration.

In this case, the initial half-life of the reaction is given as 252 seconds, and the rate constant is 1.55 x 10⁻³ M⁻¹s⁻¹ at 27°C. We can use these values to find the initial concentration of B:

t1/2 = 1 / (k [B]₀)

252 s = 1 / (1.55 x 10⁻³ M⁻¹s⁻¹ × [B]₀)

[B]₀ = 0.065 M

After one half-life, the concentration of B will be halved to 0.065 M / 2 = 0.0325 M, which is equivalent to 0.25 M (since [B]₀ = 0.065 M was the concentration at time zero). Therefore, the answer is 0.25 M. Correct option is A.

To know more about initial concentration refer here:

https://brainly.com/question/30609774#

#SPJ11