Borglie wavelength of :
(a) we get λ = h/p = 6.63 x 10^-34 J s / 4.01 x 10^-22 kg m/s = 1.66 x 10^-10 m.
(b)we get λ = h/p = 6.63 x 10^-34 J s / 155 kg m/s = 4.28 x 10^-36 m,
The de Broglie wavelength is a concept that relates the momentum of a particle to its wavelength, according to the equation λ = h/p, where λ is the wavelength, h is Planck's constant, and p is the momentum of the particle.
a) For a He atom traveling at 1000 m/s, we can calculate its momentum by multiplying its mass (4.0026 u) by its velocity (1000 m/s), which gives us a momentum of 4.01 x 10^-22 kg m/s. Plugging this value into the de Broglie wavelength equation,
b) For a person jogging at 8 km/h (2.22 m/s), we can estimate their mass to be around 70 kg. Multiplying their mass by their velocity gives us a momentum of 155 kg m/s.
Plugging this value into the de Broglie wavelength equation, which is incredibly small compared to the size of a human.
In conclusion, the de Broglie wavelength is a useful concept for understanding the wave-particle duality of matter, and it can be calculated for both atomic particles and macroscopic objects like people.
To learn more about : Borglie wavelength
https://brainly.com/question/28093301
#SPJ11
The compressor on an air conditioner draws 40.0 A when it starts up. If the start-up time is 0.50 s, how much charge passes a cross-sectional area of the circuit in this time
The compressor on an air conditioner draws 40.0 A when it starts up and during the 0.50 s start-up time, 20.0 Coulombs of charge pass through a cross-sectional area of the circuit.
The amount of charge passing through a cross-sectional area of the circuit can be calculated using the formula: Q = I x t
where Q is the charge, I is the current, and t is the time.
Using the given terms, we can determine the amount of charge that passes through a cross-sectional area of the circuit during the start-up time of the air conditioner's compressor.
In this case, the current is 40.0 A and the start-up time is 0.50 s. Plugging these values into the formula gives:
Plugging in the given values:
Q = 40.0 A x 0.50 s
Q = 20.0 Coulombs
So, during the 0.50 s start-up time, 20.0 Coulombs of charge pass through a cross-sectional area of the circuit.
To know more about compressor, refer
https://brainly.com/question/30481973
#SPJ11
An electric-discharge or LED luminaire or listed assembly can be cord connected if the luminaire is located __________ the outlet, the cord is visible for its entire length except at terminations, and the cord is not subject to strain or physical damage.
If the luminaire is placed below the outlet, the cable is visible throughout its entire length, save for the terminations, and the cord is not susceptible to strain or physical damage, the cord can be attached to an LED, electric-discharge, or listed assembly.
If any of the following circumstances occur, a luminaire or a listed assembly may be cord connected: (1) The light source is situated exactly beneath the outlet or busway. (2) The flexible cable satisfies the requirements of: is completely visible outside of the luminaire.
Electric discharge and LED luminaires that are supported separately from the outlet box must be connected to the branch circuit using a flexible cable, nonmetallic sheathed cable, Type MC cable, Type AC cable, or Type MI cable.
Learn more about luminaire visit: brainly.com/question/30145108
#SPJ4
A 3 m diameter tank is initially filled with water 2 m above the center of a sharp-edged 10 cm diameter orifice. The tank water surface is open to the atmosphere, and the orifice drains to the atmosphere. Calculate the initial velocity from the tank.
By using Torricelli's theorem, the initial velocity from the 3 m diameter tank with water 2 m above the center of a sharp-edged 10 cm diameter orifice is approximately 6.26 m/s.
Torricelli's theorem states that the speed of efflux (v) of a fluid under the force of gravity through an orifice is given by the formula v = sqrt(2gh), where g is the acceleration due to gravity (approximately 9.81 m/s²) and h is the height of the fluid above the orifice.
In this case, the height (h) is 2 m above the center of the orifice. To calculate the initial velocity (v), we can plug the values into the formula:
v = sqrt(2 * 9.81 m/s² * 2 m)
v = sqrt(39.24 m²/s²)
v = 6.26 m/s
Therefore, the initial velocity from the 3 m diameter tank with water 2 m above the center of a sharp-edged 10 cm diameter orifice is approximately 6.26 m/s.
To know more about Torricelli's theorem, refer here:
https://brainly.com/question/13258304#
#SPJ11
Complete question:
A 3 m diameter tank is initially filled with water 2 m above the center of a sharp-edged 10 cm diameter orifice. The tank water surface is open to the atmosphere, and the orifice drains to the atmosphere. Calculate the initial velocity from the tank.
In the time between two closest approaches to Earth, Venus rotates almost exactly five times relative to the Sun. The consequence of this is that:
Venus rotates very slowly on its axis, taking about 243 Earth days to complete a single rotation.
In addition, Venus's orbit around the Sun is shorter than Earth's, so the two planets periodically come close to each other in their respective orbits. During these close approaches, Venus appears as a bright, luminous object in the sky. However, because Venus rotates almost exactly five times relative to the Sun during the time between two closest approaches to Earth, it always presents nearly the same face to Earth when it is visible in the sky. This makes it difficult to observe and study the full range of Venus's surface features and geology. The fact that Venus rotates so slowly and in the opposite direction to most planets has also been the subject of scientific interest and investigation.
Learn more about “ Venus rotates “ visit here;
https://brainly.com/question/15061698
#SPJ4
A solid ball of mass 6 kg, rolls down a hill that is 6 meters high. What is the rotational KE at the bottom of the hill?
Protons are accelerated from rest by a potential difference of 3.90 kVkV and strike a metal target. Part A If a proton produces one photon on impact, what is the minimum wavelength of the resulting xx rays
The minimum wavelength of the resulting X-rays is 0.509 nm.
The minimum wavelength of the resulting X-rays can be found using the equation:
λ_min = hc / E_photon
where λ_min is the minimum wavelength of the X-rays, h is Planck's constant, c is the speed of light, and E_photon is the energy of a single photon.
To find the energy of a single photon, we can use the fact that the potential difference (V) through which the proton is accelerated is related to its final kinetic energy (K) by:
K = eV
where e is the elementary charge. The energy of a single photon is equal to the kinetic energy of the proton, since all of the proton's energy is transferred to the photon upon impact:
E_photon = K = eV
Substituting this expression into the equation for λ_min, we get:
λ_min = hc / eV
Plugging in the values for the constants, and the potential difference given in the problem, we get:
λ_min = (6.626 × 10^-34 J s)(2.998 × 10^8 m/s) / (1.602 × 10^-19 C)(3.90 kV)
Simplifying this expression, we get:
λ_min = 0.509 nm
to know more about Protons please visit
https://brainly.com/question/31802800
#SPJ11
A certain superconducting magnet in the form of a solenoid of length m can generate a magnetic field of T in its core when its coils carry a current of A. Find the number of turns in the solenoid.
Number of turns in the solenoid = [tex](T / (4\pi * 10^{(-7)} * I)) * L[/tex]
To find the number of turns in the solenoid, we can use the formula for the magnetic field inside a solenoid:
B = μ₀[tex]* n * I,[/tex]
where B is the magnetic field strength, μ₀ is the permeability of free space (a constant), n is the number of turns per unit length, and I is the current.
In this case, we know the length of the solenoid, the magnetic field strength, and the current. Let's denote the length of the solenoid as L (in meters), the magnetic field strength as B (in Tesla), the current as I (in Amperes), and the number of turns per unit length as n (in turns per meter).
Since we're given the magnetic field strength as B = T, the equation becomes:
T = μ₀ * n * I.
Now, solve for n:
n = T / (μ₀ * I).
The value of μ₀ is a constant, known as the permeability of free space, which is approximately [tex]4\pi * 10^{(-7) } T.m/A.[/tex]
Substituting the values:
n = [tex]T / (4\pi * 10^{(-7)} * I).[/tex]
To find the total number of turns, we need to multiply n by the length of the solenoid, L:
Total number of turns = n * L.
Therefore, the final expression for the number of turns in the solenoid is:
Total number of turns = [tex](T / (4\pi * 10^{(-7)} * I)) * L.[/tex]
Substitute the values of T, I, and L into this equation to calculate the number of turns in the solenoid.
For more such questions on solenoid, click on:
https://brainly.com/question/25562052
#SPJ11
When a river reaches a base level, its forward velocity rapidly decelerates as it enters a larger body of standing water and a/an __________is formed
When a river reaches a base level, its forward velocity rapidly decelerates as it enters a larger body of standing water and a/an delta is formed.
A river reaches its base level when it meets a larger body of water such as a lake or an ocean. At this point, the river loses its gradient and the energy that it once had, causing it to slow down and deposit the sediment it was carrying. This deposition of sediment leads to the formation of a delta, which is a triangular-shaped landform at the mouth of a river.
The sediment builds up over time, creating channels and distributaries that fan out from the main river channel. Deltas are important ecosystems that provide habitat for many species of plants and animals, as well as serve as natural barriers against storm surges and flooding.
For more questions like River click the link below:
https://brainly.com/question/11260945
#SPJ11
a front door drops when opened while examining a unibody wehicle for front impact damage. what has been damaged or moved back
The most likely answer is that the front bumper and/or hood have been pushed back due to the impact. The frame of the vehicle may have also been bent or twisted, which could cause the door to drop when opened.
What is bumper?A bumper is an automobile part which is designed to absorb impact in a collision. It is typically located at the front and rear of a car and is made of metal, plastic, or rubber. The purpose of a bumper is to protect the car from damage in a low speed collision. Bumpers also offer some protection to pedestrians in the event of a collision. Bumpers are designed to be strong and durable, and are typically the first point of contact for two cars in a low speed collision.
To learn more about bumper
https://brainly.com/question/4455909
#SPJ4
how does the speed of the vertically launched sphere compare to the speed of the horizonally launched sphere as they hit the dloor
The speeds of the vertically launched sphere and horizontally launched sphere will not necessarily be the same when they hit the floor, even if they are launched from the same height and at the same initial speed.
When a sphere is launched vertically upwards, it will slow down due to the force of gravity acting against it, until it reaches the highest point of its trajectory and momentarily stops. Then, it will accelerate back downwards towards the ground, increasing in speed until it hits the floor. The speed at which it hits the floor will depend on its initial speed, the height it was launched from, and the acceleration due to gravity.
On the other hand, when a sphere is launched horizontally, it will continue to move at a constant speed in the horizontal direction, while also being accelerated downwards due to the force of gravity. The resulting motion is a projectile motion with a parabolic trajectory. The speed at which it hits the floor will depend on its initial horizontal speed, the height it was launched from, and the acceleration due to gravity.
Therefore, the speeds of the vertically and horizontally launched spheres when they hit the floor will depend on a variety of factors and cannot be determined without more information about the specific conditions of the launches.
To learn more about speed. Click this!
brainly.in/question/16268943
#SPJ11
You hold a polarizer plate in front of a computer screen (LCD/LED) in an orientation that lets no light through. What do you see if you put a piece of twisted plastic between the screen and the polarizer plate
When you insert a piece of twisted plastic between a polarizer plate and a computer screen, you will observe a change in the screen's appearance due to the altered orientation of the light waves.
When you hold a polarizer plate in front of a computer screen in an orientation that lets no light through, and then place a piece of twisted plastic between the screen and the polarizer plate, you will see a change in the appearance of the screen.
1. When the polarizer plate is held in front of the computer screen, it filters the light emitted from the screen by allowing only certain orientations of light waves to pass through.
2. By positioning the polarizer in a way that lets no light through, you are essentially blocking all light waves from the screen that are not aligned with the polarizer's axis.
3. When you place a piece of twisted plastic between the polarizer plate and the screen, the twisted plastic acts as a wave plate. This means that it alters the orientation of the light waves passing through it.
4. As the twisted plastic changes the orientation of the light waves, some of these waves will now align with the polarizer's axis, allowing them to pass through the polarizer and be visible to your eyes.
5. The appearance of the screen will change as the twisted plastic alters the orientation of the light waves. You may observe various colors and patterns on the screen, depending on the specific properties of the twisted plastic and the polarizer.
In summary, when you insert a piece of twisted plastic between a polarizer plate and a computer screen, you will observe a change in the screen's appearance due to the altered orientation of the light waves passing through the twisted plastic and the polarizer.
Learn more about polarization at: https://brainly.com/question/29332653
#SPJ11
Horizontal motion
Vf = Vi + at
Vf2 = Vi2 + 2ad
d = Vit + ½ at2
Problem-Solving #01
An object with an initial velocity of 4 / moves in a straight line under a constant acceleration. Three seconds later, its velocity is 14 / .
(a.) How far did the object travel during this time?
• s = u*3 + ½*a*t^2
• = 43 = 1/2 * (10/3)* 3^2
• s = 12 + 10/6 * 9 = 27 meters
(b) What was the acceleration of the object?
• a = 10/3 = 3.333 m/s^2
Problem-Solving #02
A car that is traveling with a velocity of 16.5.m/s accelerates uniformly to a velocity of 37.5 m/s over a time of 2.85 s.
What is the acceleration of the car during this time?
Problem-Solving #03
Suzy is riding her bicycle along the street with a velocity of 8.7 m/s. suddenly, she is being chased by a bulldog. To get away, she accelerates at 1.5m/s2 for 10 s.
What is her final velocity?
Horizontal motion
Vf = Vi + at
Vf2 = Vi2 + 2ad
d = Vit + ½ at2
1) Problem 01
Given
Vi = 4 m/s
Vf = 14 m/s
t = 3 s
Using the equation
Vf = Vi + at
Where Vf is the final velocity, Vi is the initial velocity, a is the acceleration, and t is the time taken.
Substituting the given values into the equation, we get
14 m/s = 4 m/s + a * 3 s
Solving for a, we get
a = (14 m/s - 4 m/s) / 3 s
a = 10/3 m/[tex]s^{2}[/tex]
Using the equation:
d = Vit + ½ a[tex]t^{2}[/tex]
Where d is the distance travelled, Vi is the initial velocity, a is the acceleration, and t is the time taken.
Substituting the given values into the equation, we get
d = 4 m/s * 3 s + 1/2 * (10/3m/[tex]s^{2}[/tex] )* [tex](3s)^{2}[/tex]
d = 12 m + 15 m
d = 27 meters
Hence, the object travelled 27 meters during this time, and the acceleration of the object was 10/3 m/[tex]s^{2}[/tex].
2) Problem 02
Given
Vi = 16.5 m/s
Vf = 37.5 m/s
t = 2.85 s
Using the equation:
Vf = Vi + at
Where Vf is the final velocity, Vi is the initial velocity, a is the acceleration, and t is the time taken.
Substituting the given values into the equation, we get
37.5 m/s = 16.5 m/s + a * 2.85 s
Solving for a, we get
a = (37.5 m/s - 16.5 m/s) / 2.85 s
a = 7.37 m/[tex]s^{2}[/tex]
Hence, the acceleration of the car during this time was 7.37m/[tex]s^{2}[/tex].
3) Problem 03
Given
Vi = 8.7 m/s
a = 1.5 m/[tex]s^{2}[/tex]
t = 10 s
Using the equation
Vf = Vi + at
Where Vf is the final velocity, Vi is the initial velocity, a is the acceleration, and t is the time taken.
Substituting the given values into the equation, we get
Vf = 8.7 m/s + (1.5 m/[tex]s^{2}[/tex]) * 10 s
Vf = 23.7 m/s
Hence, Suzy's final velocity was 23.7 m/s after accelerating for 10 seconds with an acceleration of 1.5m/[tex]s^{2}[/tex].
To know more about Horizontal motion here
https://brainly.com/question/27977898
#SPJ1
[20 pts] determine the maximum deflection and maximum slope of the cantilevered beam use e = 200 gpa and i = 65.0 x 106 mm4
The cantilevered beam's maximum deflection is (5 * wL4) / (384 * E * I), or roughly 0.0806 * wL4 / I. The maximum slope of the beam is (wL3) / (24 * E * I).
Which is roughly equivalent to 0.000325 * wL3 / I, where w is the uniform load, L is the beam's length, E is its elastic modulus, and I is its moment of inertia. Equations derived from the bending moment equation of the beam can be used to determine the maximum deflection and maximum slope of a cantilevered beam. These equations consider the applied load, the length of the beam, and the parameters of the beam, such as its moment of inertia and modulus of elasticity. As you proceed along the length of the beam towards the point where it is supported, the deflection and slope are at their highest at the fixed end of the beam. These calculations are crucial to make sure the beam is built to sustain the anticipated load without failing or deforming outside of acceptable bounds.
learn more about cantilevered here:
https://brainly.com/question/29290377
#SPJ11
A typical arteriole has a diameter of 0.030 mm and carries blood at the rate of 5.5 x 10-6 cm3/s. (a) What is the speed of the blood in an arteriole
The first step is to calculate the cross-sectional area of the arteriole using its diameter (0.030 mm). The formula for the cross-sectional area of a circle is A = πr^2, where r is the radius of the circle. Therefore, the cross-sectional area of the arteriole is A = π(0.015 mm)^2 = 0.0007069 mm^2.
Next, we can convert the blood flow rate from cm^3/s to mm^3/s by multiplying by 1000 (since there are 1000 mm^3 in 1 cm^3). Therefore, the blood flow rate in the arteriole is 5.5 x 10^-3 mm^3/s.
To find the speed of the blood in the arteriole, we can use the formula v = Q/A, where v is the speed, Q is the flow rate, and A is the cross-sectional area. Substituting in the values we found, we get v = (5.5 x 10^-3 mm^3/s) / (0.0007069 mm^2) = 77.79 mm/s.
Therefore, the speed of the blood in a typical arteriole is approximately 77.79 mm/s. This answer is within the 100 word limit.
To find the speed of the blood in an arteriole, we need to use the formula:
Speed = Flow rate / Cross-sectional area
First, let's convert the given diameter (0.030 mm) to centimeters and find the radius of the arteriole:
Diameter = 0.030 mm = 0.003 cm
Radius = Diameter / 2 = 0.003 cm / 2 = 0.0015 cm
Now, let's calculate the cross-sectional area of the arteriole using the formula for the area of a circle (A = πr²):
A = π(0.0015 cm)² ≈ 7.07 x 10⁻⁶ cm²
We are given the flow rate as 5.5 x 10⁻⁶ cm³/s. Now, let's find the speed:
Speed = (5.5 x 10⁻⁶ cm³/s) / (7.07 x 10⁻⁶ cm²) ≈ 0.777 cm/s
So, the speed of the blood in an arteriole is approximately 0.777 cm/s.
For more information on cross-sectional area visit:
brainly.com/question/20532494
#SPJ11
Vertically polarized light with an intensity of 100 W/m2 passes through a polarizer whose transmission axis is at an angle of 15 degrees with the vertical. What is the intensity of the transmitted light
The intensity of the transmitted light is approximately 96.6 W/m².
The intensity of the transmitted light can be found using Malus's Law which states that the intensity of the transmitted light is equal to the incident intensity multiplied by the square of the cosine of the angle between the transmission axis and the polarization direction of the incident light.
Given that the incident light is vertically polarized and has an intensity of 100 W/m2, and the transmission axis of the polarizer is at an angle of 15 degrees with the vertical, we can calculate the intensity of the transmitted light as follows:
cos^2(15) = 0.966
Transmitted intensity = 100 x 0.966 = 96.6 W/m2
Therefore, the intensity of the transmitted light is 96.6 W/m2.
To know more about intensity, visit:
https://brainly.com/question/17583145
#SPJ11
To regain control of a vehicle in a skid, __________. press hard on the brake make smooth steering corrections counter steer to the maximum press hard on the accelerator
To regain control of a vehicle in a skid, one should make smooth steering corrections.
When a vehicle enters into a skid, the wheels of the vehicle lose their grip on the road and the vehicle starts to slide in a direction different from the direction of the wheels. In such a situation, one should avoid pressing hard on the brake or accelerator as it can make the skid worse. Instead, one should steer smoothly in the direction of the skid to regain control of the vehicle. This is known as counter-steering. By doing this, the wheels will start to grip the road again, and the vehicle will begin to move in the desired direction. It is important to remember to avoid overcompensating when counter-steering, as this can lead to another skid in the opposite direction.
Know more about steering here;
https://brainly.com/question/29944212
#SPJ11
The atmosphere exerts a pressure on you; however, you do not feel the pressure and you are not crushed by it. This observation is explicable because the pressure inside your body is _____ the atmospheric pressure outside. Multiple choice question.
The atmosphere exerts a pressure on you; however, you do not feel the pressure and you are not crushed by it. This observation is explicable because the pressure inside your body is the pressure inside your body is equal to the atmospheric pressure outside.
The human body is a remarkable system that is capable of maintaining equilibrium with the surrounding environment, including atmospheric pressure. The pressure exerted by the atmosphere, known as atmospheric pressure, is caused by the weight of the air above us.
Inside our bodies, we have various fluids and tissues, including blood, which exert pressure as well. This internal pressure, often referred to as internal or physiological pressure, is balanced and equalized with the external atmospheric pressure. This balance is crucial for our body's proper functioning.
If there were a significant difference between the internal and external pressures, it would lead to discomfort or potential health issues.
For example, if the internal pressure were higher than the external pressure, it could cause blood vessels to rupture or organs to be compressed. On the other hand, if the external pressure were higher, it could lead to the collapse of lungs or other internal structures.
Fortunately, our body's natural mechanisms, such as the circulatory and respiratory systems, work to maintain this balance. The circulatory system regulates blood pressure, while the respiratory system adjusts the air pressure within the lungs to match the atmospheric pressure.
As a result, the pressure inside our bodies remains equal to the atmospheric pressure outside. This balance allows us to exist comfortably without feeling the atmospheric pressure or being crushed by it.
To learn more about pressure, refer below:
https://brainly.com/question/12971272
#SPJ11
space shuttle travels at 17,500 mph if venus is 25 million miles from earth,how many hours will it take shuttle to get to venus
It will take approximately 1,428.57 hours, or about 59.5 days, for the space shuttle to travel from Earth to Venus
To calculate the time it takes for the space shuttle to travel from Earth to Venus:
Time = Distance / Speed
Where distance is the distance between Earth and Venus, and speed is the speed of the space shuttle.
Plugging in the given values, we get:
Time = 25,000,000 miles / 17,500 miles per hour
Simplifying the equation, we get:
Time = 1,428.57 hours
Therefore, it will take approximately 1,428.57 hours, or about 59.5 days, for the space shuttle to travel from Earth to Venus at a speed of 17,500 miles per hour.
To know more about Space shuttle, here
brainly.com/question/6906642
#SPJ1
2. the wave Speed is 0.25m/s and the cark moves
Up and down 4 times in 8 seconds.
Caculate The
wavelength?
Since we don't know the frequency, we can't give a specific numerical value for the wavelength. But by using another we can get wavelength = 0.25m/s / frequency as wavelength.
To calculate the wavelength, we need to use the formula:
wavelength = wave speed/frequency
However, the frequency is not given in the question. Therefore, we need to use another formula that relates frequency to the speed and wavelength:
frequency = wave speed/wavelength
We can rearrange this formula to solve for wavelength:
wavelength = wave speed/frequency
Substituting the given wave speed of 0.25m/s, we have:
wavelength = 0.25m/s / frequency
However, we can say that the wavelength will be inversely proportional to the frequency. This means that if the frequency is high, the wavelength will be short, and vice versa.
For more such questions on wavelength:
https://brainly.com/question/31143857
#SPJ11
The _______ is easier to use than a(n) ________ because it does not require any battery cables to be removed; it is quickly clamped around the main starter cable.
The battery load tester is easier to use than a multimeter because it does not require any battery cables to be removed; it is quickly clamped around the main starter cable. A battery load tester is a device used to assess the health of a car battery by measuring its ability to produce current under load. This is crucial in determining whether the battery can provide the necessary power to start a vehicle, particularly in challenging conditions.
In contrast, a multimeter is a versatile tool for measuring various electrical parameters, such as voltage, current, and resistance. To use a multimeter for battery testing, the battery cables must be disconnected, and the probes must be attached to the battery terminals. This process can be time-consuming and may pose safety risks if not performed correctly.
The battery load tester simplifies the testing process by eliminating the need to remove cables, allowing for a more user-friendly and efficient assessment of the battery's health. Additionally, the battery load tester's specific design for battery testing ensures accurate results, while a multimeter, being a general-purpose tool, might not provide the same level of precision.
Learn more about multimeter here:
https://brainly.com/question/29442319
#SPJ11
When a light wave leaves a region of strong gravity, compared to the same wave leaving a spaceship in empty space, the wave in strong gravity will have
When a light wave leaves a region of strong gravity, it is affected by the gravitational force of the object it is passing near. This means that the light wave will experience a redshift, or a stretching of its wavelength.
This is because the gravity of the object causes a distortion in spacetime, which affects the path of the light wave. On the other hand, a light wave leaving a spaceship in empty space would not experience any gravitational distortion and would not be affected in the same way.
In other words, the light wave leaving the region of strong gravity would have a longer wavelength and lower frequency compared to the same wave leaving the spaceship in empty space. This effect is known as gravitational redshift and is a key prediction of Einstein's theory of general relativity.
When a light wave leaves a region of strong gravity, such as near a massive object, compared to the same wave leaving a spaceship in empty space, the wave in strong gravity will have a longer wavelength and lower frequency.
This phenomenon is called gravitational redshift. It occurs because the strong gravitational field causes time to dilate, stretching the light wave and decreasing its energy. Conversely, in empty space with weaker gravity, the light wave maintains its original wavelength and frequency, as it does not experience significant time dilation or energy loss.
To know more about light wave visit:
brainly.com/question/23460034
#SPJ11
A rock has mass 1.80 kg. When the rock is suspended from the lower end of a string and totally immersed in water, the tension in the string is 11.7 N. Part A What is the smallest density of a liquid in which the rock will float
he smallest density of a liquid in which the rock will float is 0.553 g/cm³.
When the rock is suspended in water, it displaces an amount of water equal to its own volume, and the weight of the water displaced by the rock is equal to the buoyant force acting on the rock. Therefore, the buoyant force acting on the rock is given by the weight of water displaced, which can be calculated using the mass and density of water:
Buoyant force = weight of water displaced = (mass of rock) x (density of water) x (acceleration due to gravity)
The weight of the rock when it is completely immersed in water is given by its mass times the acceleration due to gravity:
Weight of rock = (mass of rock) x (acceleration due to gravity)
Since the tension in the string is equal to the weight of the rock minus the buoyant force, we can set these two expressions equal to each other and solve for the density of the liquid:
Weight of rock - buoyant force = tension in string
(mass of rock) x (acceleration due to gravity) - (mass of rock) x (density of liquid) x (acceleration due to gravity) = tension in string
(mass of rock) x (acceleration due to gravity) (1 - density of liquid / density of rock) = tension in string
density of liquid / density of rock = 1 - tension in string / (mass of rock) x (acceleration due to gravity)
density of liquid = density of rock x (1 - tension in string / (mass of rock) x (acceleration due to gravity))
Plugging in the given values, we get:
density of liquid = (1.80 kg) / [(11.7 N) / (9.81 m/s²) + (1.80 kg) / (1000 g/kg x 997 kg/m³)]
density of liquid = 0.553 g/cm³ (rounded to three significant figures).
To know more about buoyant force, click here:-
https://brainly.com/question/21990136
#SPJ11
The wad of clay of mass m is initially moving with a horizontal velocity when it strikes and sticks to the initially stationary uniform slender bar of mass M and length L. Determine the final angular velocity of the combined body and the x-component of the linear impulse applied to the body by the pivot O during the impact.
The final angular velocity of the combined body is ω = (3 m v) / (M L) and the x-component of the linear impulse applied to the body by the pivot O during the impact is Jx = 0.
Let's denote the velocity of the wad of clay before the collision as v, the final angular velocity of the combined body as ω, and the x-component of the linear impulse applied to the system by the pivot O as Jx.
Using the principle of conservation of angular momentum, we can write:
m v L = (1/3) M L² ω
Solving for ω, we get:
ω = (3 m v) / (M L)
Next, we can use the principle of conservation of linear momentum to find the x-component of the linear impulse Jx. Since the collision is inelastic, the final velocity of the combined body is zero after the collision. Therefore, we can write:
m v + 0 = (m + M) Vx
where Vx is the x-component of the velocity of the combined body after the collision. Solving for Vx, we get:
Vx = (m v) / (m + M)
The change in linear momentum Δp in the x-direction is given by:
Δp = (m + M) Vx - m v
Substituting the expression for Vx, we get:
Δp = [(m + M) (m v) / (m + M)] - m v
Δp = 0
This means that the x-component of the linear impulse Jx applied to the system by the pivot O during the impact is zero.
To know more about angular velocity, here
brainly.com/question/29557272
#SPJ1
On a planet, an astronaut determines the acceleration of gravity by means of a pendulum. She observes that the 1-m-long pendulum has a period of 1.5 s. The acceleration of gravity, in meters per second squared, on the planet is
On a planet, an astronaut determines the acceleration of gravity using a 1-meter long pendulum with a period of 1.5 seconds: the acceleration of gravity on the planet is approximately 17.56 meters per second squared.
To find the acceleration of gravity in meters per second squared, we can use the formula for the period of a simple pendulum:
T = 2π√(L/g),
where T is the period, L is the length of the pendulum, and g is the acceleration of gravity. Given the period T=1.5 seconds and the length L=1 meter, we can rearrange the formula to solve for g:
g = (4π²L)/T².
Substituting the given values:
g = (4π²(1))/(1.5²)
g ≈ 17.56 meters per second squared.
Therefore, the acceleration of gravity on the planet is approximately 17.56 meters per second squared.
To know more about acceleration, refer here:
https://brainly.com/question/28743430#
#SPJ11
When a bicycle is slowing down, the wheels slow with an angular acceleration of -15 rad/s2 . If each wheel has a mass of 0.4 kg and a radius of 0.3 m, what is the net torque on each wheel
The net torque on each wheel of the bicycle is -0.27 Nm.It is important to note that the negative sign indicates that the torque is in the opposite direction to the motion of the wheel.
To find the net torque on each wheel of a bicycle slowing down with an angular acceleration of -15 rad/s², we can use the formula for torque:
τ = Iα
Where τ is the net torque, I is the moment of inertia, and α is the angular acceleration.
We are given the mass and radius of each wheel as 0.4 kg and 0.3 m, respectively, and the angular acceleration as -15 rad/s². The moment of inertia of a solid cylinder is:
I = 1/2 mr²
Substituting the given values, we get:
I = 1/2 × 0.4 kg × (0.3 m)² = 0.018 kg m²
We can now calculate the net torque using the formula:
τ = Iα
Substituting the given values, we get:
τ = 0.018 kg m² × (-15 rad/s²) = -0.27 Nm.
For such more questions on Net torque:
https://brainly.com/question/14927912
#SPJ11
when a charged ruler attracts small pieces of paper, somtimes a piece jumps quickly away after touching the ruler. explain
When a charged ruler attracts small pieces of paper, the paper pieces become charged by induction. The charged ruler induces a charge of opposite polarity on the side of the paper facing the ruler and a charge of the same polarity on the side facing away from the ruler.
If a piece of paper jumps quickly away after touching the ruler, it may be due to the fact that the charge on the paper is not uniformly distributed. When the paper touches the charged ruler, the charge is transferred between them, and the paper may become charged with a higher concentration of charge in one particular spot.
This concentrated charge creates a strong electric field that interacts with the electric field of the charged ruler. If the electric field of the paper is strong enough, it can overcome the attractive force between the ruler and the paper, causing the paper to jump quickly away.
Learn more about charged by induction
https://brainly.com/question/10254645
#SPJ4
Our Sun has a surface temperature of 5770 K and a radius of 6.96 x 105km. Jupiter has a mean radius of 69,900 km, an albedo of 0.52 and an average orbital radius of 778 x 106 km. The observed equivalent blackbody temperature of Jupiter is 20 K higher than the effective temperature of Jupiter. Assuming that the temperature of Jupiter is in a steady state, estimate the flux density of radiation emitted from the top of it atmosphere that is generated internally by processes in the planet.
The flux density of radiation emitted from the top of Jupiter's atmosphere that is generated internally by processes in the planet is approximately 0.34 W/m2.
To estimate the flux density of radiation emitted from the top of Jupiter's atmosphere, we first need to calculate its effective temperature. We know that the observed equivalent blackbody temperature of Jupiter is 20 K higher than the effective temperature, so we can calculate the effective temperature by subtracting 20 K from the observed temperature.
The observed temperature of Jupiter can be estimated using the Stefan-Boltzmann law, which states that the flux density of radiation emitted by a blackbody is proportional to the fourth power of its temperature. Using the radius and albedo of Jupiter, we can calculate the amount of solar energy absorbed by the planet, and then use this to estimate its temperature.
Using the formula for the flux density of solar radiation at Jupiter's distance from the Sun, we find that the amount of solar energy absorbed by Jupiter is about 52.8 W/m2. Assuming that Jupiter is in a steady state and that it emits the same amount of energy as it absorbs, we can set the flux density of radiation emitted by Jupiter equal to the flux density of solar radiation absorbed:
σTeff^4 = 52.8 W/m2
where σ is the Stefan-Boltzmann constant.
Solving for Teff, we get:
Teff = (52.8/σ)^1/4 = 110.8 K
The observed equivalent blackbody temperature of Jupiter is 20 K higher than this, so the observed temperature is:
Tobs = Teff + 20 K = 130.8 K
Finally, we can use the Stefan-Boltzmann law again to estimate the flux density of radiation emitted from the top of Jupiter's atmosphere. We know that the flux density is proportional to the fourth power of the temperature, so we can write:
σTobs^4 = F/A
where F is the total energy emitted by Jupiter, and A is the surface area of Jupiter's atmosphere. We can assume that the energy is emitted uniformly over the surface of the planet, so we can use the formula for the surface area of a sphere:
A = 4πR^2
where R is the radius of Jupiter.
Substituting the values we know, we get:
σ(130.8 K)^4 = F/(4π(69,900 km)^2)
Solving for F, we get:
F = σ(130.8 K)^4 × 4π(69,900 km)^2 = 1.13 × 10^17 W
Dividing by the surface area of Jupiter's atmosphere, we get the flux density:
F/A = (1.13 × 10^17 W)/(4π(69,900 km)^2) = 0.34 W/m2
learn more about flux density here:
https://brainly.com/question/29119253
#SPJ11
A long, straight wire carries a current of 13.4 A. An electron travels at 59600 m/s parallel to the wire, 46 cm from the wire. What force does the magnetic field of the current exert on the moving electron
The force exerted by the magnetic field of the current on the moving electron is approximately -5.57 x 10⁻¹⁵ N in along, straight wire carries a current of 13.4 A. An electron travels at 59600 m/s parallel to the wire, 46 cm from the wire.
The force exerted by the magnetic field of the current on the moving electron can be calculated using the following formula:
F = q * v * B
where F is the force, q is the charge of the electron, v is the velocity of the electron, and B is the magnetic field due to the current in the wire.
1. Calculate the magnetic field (B) using Ampere's Law:
[tex][tex]B= \frac{(μ₀ * I)}{(2 * \pi * r)}[/tex][/tex]
where μ₀ is the permeability of free space[tex](4\pi *10T^{-7} m/A)[/tex], I is the current in the wire (13.4 A), and r is the distance from the wire (0.46 m).
[tex]B=\frac{(4\pi * 10^{-7} T m/A * 13.4 A)}{(2 * \pi * 0.46 m)}[/tex]
B ≈ 5.83 * 10^{⁻⁶} T
2. Calculate the force (F) exerted on the electron:
The charge of an electron (q) is approximately [tex]-1.6 * 10^{-19} C[/tex], and its velocity (v) is given as 59600 m/s. Now, plug these values into the formula:
F = q * v * B
[tex]F = (-1.6 * 10^{-19} C) * (59600 m/s) * (5.83 * 10^{-6} T)[/tex]
F ≈ -5.57 x 10⁻¹⁵ N
The force exerted by the magnetic field of the current on the moving electron is approximately -5.57 x 10⁻¹⁵ N.
For more information on magnetic field kindly visit to
https://brainly.com/question/12876829
#SPJ11
if during a stride, the strecth causes her center of mass to lower by 10 mm, what is the stored energy
The amount of stored energy in this scenario would depend on several factors, including the mass of the individual and the force applied during the stretch.
Potential Energy (PE) = mass (m) × gravity (g) × height (h)
PE = 60 kg × 9.81 m/s² × 0.01 m
PE = 5.886 J (Joules)
So, the stored energy is approximately 5.886 Joules when the center of mass lowers by 10 mm during a stride.
Learn more about energy here : brainly.com/question/1932868
#SPJ11
The three lightbulbs in the circuit all have the same resistance of 1 W . By how much is the brightness of bulb B greater or smaller than the brightness of bulb A
The main answer to your question is that the brightness of bulb B is the same as the brightness of bulb A since they both have the same resistance.
To give an explanation, when lightbulbs are connected in series, the same current flows through each bulb.
Since they have the same resistance, they will both use the same amount of energy and emit the same amount of light.
In summary, the brightness of bulb B is not greater or smaller than the brightness of bulb A as they are equal due to the same resistance and same current flowing through them in series.
Learn more about resistance click here:
https://brainly.com/question/17563681
#SPJ11