Calculate the current flowing into a desktop computer plugged into a 120-V outlet if the power used is 180 W.

When 5-methyl-3-hexyne (or 5-methylhex-3-yne) reacts with Cl2, the triple bond will be broken, and two Cl atoms will be added to the two adjacent carbons, forming a dihalogenated alkene.

This will result in the formation of a trans-dihalogenated alkene, where the two Cl atoms are on opposite sides of the double bond. The major product for the first reaction will be 5-methyl-3-hexene-1,2-dichloro, which is formed by the addition of two Cl atoms to the carbons 3 and 4, and the formation of a double bond between carbons 2 and 5. The major product of this reaction will be 5-methyl-3,4-dichloro-2-hexene, which is formed by the addition of two Cl atoms to the carbons 2 and 5, and the addition of two more Cl atoms to the carbons 3 and 4.

Learn more about triple bond reaction here:

https://brainly.com/question/19331363

#SPJ4

The balanced nuclear equation for the alpha decay of polonium-84, and the nuclear equation for thorium-229 are:

Polonium-84 alpha decay:

^84Po --> ^4He + ^80Hg

In this equation, an alpha particle, which is a helium nucleus with a mass number of 4 and atomic number of 2, is emitted from the polonium-84 nucleus, resulting in the formation of a mercury-80 nucleus.

Thorium-229 nuclear equation:

^229Th

Thorium-229 is a stable isotope and does not undergo alpha decay or any other form of radioactive decay under normal circumstances.

Learn more about the balanced nuclear equation:

https://brainly.com/question/19752321

#SPJ4

The balanced form of the equations given above is as follows:

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.

According to this question, some equations are given. The balanced form of these equations using coefficients are given in the main answer part.

Learn more about balanced equation at: https://brainly.com/question/28294176

#SPJ1

The theoretical yield of lead(II) chloride is 2.992 g.

The percent yield is 79.6%.

(a) To find the theoretical yield of lead(II) chloride, we need to determine the limiting reagent in the two reactions.

First, calculate the moles of PbCO₃:

molar mass of PbCO₃ = 267.2 g/mol

moles of PbCO₃ = 2.871 g / 267.2 g/mol = 0.01075 mol

Next, we use the mole ratio between PbCO₃ and PbCl₂ in the second reaction to determine the moles of PbCl₂ produced:

moles of PbCl₂ = moles of PbCO3 × (1 mol PbCl₂ / 1 mol PbCO3) = 0.01075 mol

Finally, we convert the moles of PbCl₂ to grams using the molar mass of PbCl₂:

molar mass of PbCl₂ = 278.1 g/mol

theoretical yield of PbCl₂ = moles of PbCl₂ × molar mass of PbCl₂ = 0.01075 mol × 278.1 g/mol = 2.992 g

Therefore, the theoretical yield of lead(II) chloride is 2.992 g.

(b) The percent yield is calculated by dividing the actual yield by the theoretical yield and multiplying by 100:

percent yield = (actual yield / theoretical yield) × 100%

The actual yield is given as 2.385 g. Substituting this and the theoretical yield calculated in part (a) gives:

percent yield = (2.385 g / 2.992 g) × 100% = 79.6%

Therefore, the percent yield of lead(II) chloride is 79.6%.

Learn more on theoretical yield here: https://brainly.com/question/25996347

#SPJ1

The 1.0 m calcium chloride solution has the lowest freezing point and the greatest boiling point among the four solutions. In solution, calcium chloride, a salt, splits into three ions (Ca2+ and two Cl-).

A colligative property of a solution is a physical property that depends on the number of solute particles present in the solution and not on their chemical identity. Examples of colligative properties include the lowering of the freezing point, the elevation of the boiling point, vapor pressure lowering, and osmotic pressure. These properties are related to the changes in the physical behavior of a solvent caused by the presence of solute particles, such as a reduction in the solvent's vapor pressure or an increase in its boiling point. Colligative properties are important in various fields, including chemistry, materials science, and biology.

Hence, the answer is, of the four solutions, 1.0 m calcium chloride has both the lowest freezing point and the highest boiling point.

To learn more about colligative properties, follow the link:

brainly.com/question/29971068

#SPJ4

Elements C and D are the same and elements A and B are the same.

The periodic table of elements is arranged in order of increasing atomic number, with elements in the same group having similar chemical and physical properties. Generally, elements in the same group have similar reactivity due to their similar electron configurations.

We can see that the table that we have shows that the elements  C and D are the same and elements A and B are the same.

Learn more about reactivity:https://brainly.com/question/30843855

#SPJ1

The result from conversion 1.077 moles of magnesium phosphate to mass in grams is 283.14 grams. The molar mass of magnesium phosphate is 262.9 g/mol.

Formula:

[tex]\boxed{\tt g=n\times Mr}[/tex]

Given:

Therefore,

First, calculate the molar mass of Mg₃(PO₄)₂.

Second, calculate mass of Mg₃(PO₄)₂.

So, 1.077 moles of magnesium phosphate correspond to 283.14 grams of magnesium phosphate.

Learn more about other conversion from moles to mass on:

The coefficient of [tex]$\mathrm{HNO}_3$[/tex] exists 8 , and [tex]$\mathrm{H}_2 \mathrm{O}$[/tex] exists 4.

The ratio between a sample's mass and its substance content is known as the molar mass of a chemical compound in chemistry. A substance's molar mass is a bulk attribute rather than a molecular one.

One mole of a material is weighed to determine its molar mass. Add the masses of all the components in a molecule to determine the molecular mass of the molecule by multiplying the subscript (number of atoms) by the atomic mass of each element in the molecule.

The first step will be to convert 144.1 grams of [tex]$\mathrm{HNO}_3$[/tex] to moles. To estimate the molar mass

[tex]$$1(1.0)+1(14)+3(16)=1+14+48=63 \mathrm{~g} / \mathrm{mol}$$[/tex]

[tex]$144.1 \mathrm{gHNO}_3 \times \frac{1 \mathrm{~mol} \mathrm{HNO}_3}{63 \mathrm{gHNO}_3}=2.287 \mathrm{~mol} \mathrm{HNO}_3$$[/tex]

Moles of [tex]$\mathrm{HNO}_3$[/tex] you're starting with, utilize the ratio of moles in the equation to find the moles of [tex]$\mathrm{H}_2 \mathrm{O}$[/tex] produced. The coefficient of [tex]$\mathrm{HNO}_3$[/tex] exists 8 , and [tex]$\mathrm{H}_2 \mathrm{O}$[/tex] exists 4

[tex]$$\begin{aligned}& 2.287 \mathrm{moHHO}_3 \times \frac{4 \mathrm{~mol}}{ 8 \mathrm{moH}_3} \mathrm{H}_2 \underline{\mathrm{O}}=1.144 \mathrm{~mol} \mathrm{H}_2 \mathrm{O} \\&\end{aligned}$$[/tex]

Rounded to the nearest tenth, 1.1 moles [tex]$\mathrm{H}_2 \mathrm{O}$[/tex].

To learn more about molar mass refer to:

https://brainly.com/question/837939

#SPJ4

Here is the completed sequence with the requested information, the reagents for all three steps are  Mg (metallic magnesium), H3O+ (Hydronium ion), PCC (Pyridinium chlorochromate).

A reagent is a substance that is added to a chemical reaction to cause a chemical change or to test for the presence or absence of another substance. Reagents are often used in chemical analysis, organic synthesis, and other chemical processes.

Step 1:

Reagent: Mg (metallic magnesium)

Product: Compound A

Reaction type: Grignard reaction

Structure of compound A: Not enough information provided

Step 2:

Reagent: H3O+ (Hydronium ion)

Product: Compound B

Reaction type: Acid-catalyzed hydration of an alkene

Structure of compound B: Not enough information provided

Step 3:

Reagent: PCC (Pyridinium chlorochromate)

Product: Not provided

Reaction type: Oxidation of a primary alcohol to an aldehyde

To know more about reagent here

https://brainly.com/question/26905271

#SPJ4

NaF – Na is assigned an oxidation number of +1. The molecule is neutral, therefore, F must be assigned an oxidation number of -1.

SiO2 – The oxidation number of silicon in silicon oxide is 4.

Cl2O7 – The oxidation state of chlorine in Cl2O7 is +7

Ca3N2 – The oxidation number of Ca in Ca3N2 C a 3 N 2 is (c)+2. Here, 3 atoms of Ca in a +2 state combine with 2 atoms of N in a -3 state to give a net zero charge (as +6 charge of Ca atoms cancel out the -6 charge of the N atoms).

CaO – Since Ca is in column 2 of the periodic table, it will share 2 electrons and use an oxidation state of 2 . Since O is in column 6 of the periodic table, it will share 6 electrons and use an oxidation state of 6 .

N2O3 – Nitrogen is in the +3 oxidation state in N2O3.

What is the oxidation state?

To know more about oxidation state, click the link given below:

https://brainly.com/question/17161178

#SPJ1

Molecular equation: AgNO3(aq)+HCl(aq)→AgCl(s)+HNO3(aq), ionic equation: Ag+(aq)+ NO3-(aq)+H+(aq)+Cl-(aq) -> AgCl(s)+H+(aq)+ NO3-(aq), Net ionic equation : Ag+(aq)+Cl-(aq) -> AgCl(s).

The equation is known as a molecular solution when complex formulae are written as though they're still molecules. When dissolved ionic chemicals are represented as free ions, the equation is said to be ionic. Demonstrated were examples of both molecular and ionic relations.

Even soluble ionic chemicals and strong acids are treated as neutral molecules in the molecular formula for a reaction's reactants and products. Strong acids and soluble ionic compounds are rewritten as split ions in the full ionic equation.

To know more about Molecular equation visit:

https://brainly.com/question/14286552

#SPJ1

The standard Gibbs free energy of reaction is -25.4 kJ/mol. And  the equilibrium constant (K) for the reaction is approximately 4.85. The value of AG for the first reaction is approximately -31.9 kJ/mol. The value of AS for the second reaction is approximately 174 J/mol/K.

We may use the following equation to determine the standard Gibbs free energy of reaction for the first portion of the question:

G=-RT ln K

where T is the temperature in Kelvin, K is the equilibrium constant, and R is the gas constant. Given that K and T are known, we may solve for G° by substituting these values:

G° is equal to -(8.314 J/mol K)/293 K*ln (6.7 10–10).

-25.4 kJ/mol for G°

As a result, the reaction's standard Gibbs free energy is -25.4 kJ/mol.

The following equation can be used to determine the equilibrium constant K for the reaction in the second section of the question:

G=-RT ln K

But, since G and T are provided in this instance, we can modify the equation to account for K:

K = e^(-ΔG°/RT)

K is equal to e(-121000 J/mol / 8.314 J/mol K * 303 K).

K ≈ 4.85

As a result, the reaction's equilibrium constant is roughly 4.85.

We can complete the table as follows to answer the third component of the question:

Response AH (kJ/mol)

J/mol K, AS

(kJ/mol) AG

Graphite spontaneity = CO2 107 397 -31.9

Neither P2O5? -44? nor 2H3PO4?

We can use the following equation to determine AG for the initial reaction:

ΔG = ΔH - TΔS

where H stands for the change in enthalpy, S for the change in entropy, and T for temperature. Given that H and S are known, we can use these values as substitutes to find G:

G is equal to 107000 J/mol - 298 K * 397 J/mol K.

-31.9 kJ/mol for G

As a result, the AG value for the first reaction is roughly -31.9 kJ/mol.

The following response, Given that H and G are provided, we must determine S. We can apply the formula:

ΔG = ΔH - TΔS

then reorder it to account for S:

ΔS = (ΔH - ΔG) / T

"S" is equal to (116000 J/mol - 41000 J/mol) (286 K)

174 J/mol K for S.

As a result, the second reaction's AS value is roughly 174 J/mol K.

We can use the sign of G to ascertain each reaction's spontaneity. If G is less than zero, the reaction moves ahead on its own. The reaction is spontaneously in the opposite direction if G > 0. The system is in equilibrium and neither the forward nor the backward reaction is spontaneous if G = 0.

We discovered that G is negative for the initial reaction, indicating that the reaction is spontaneous in the forward direction.

Because we don't know the values of H and G, we lack the knowledge necessary to determine the spontaneity of the second reaction.

Learn more about Gibbs free energy here:

https://brainly.com/question/20358734

#SPJ4

Elevation of ATP (adenosine triphosphate) would be an example of a compound that will reduce activity through the TCA cycle.

The TCA cycle also known as the citric acid cycle or Krebs cycle, is a series of metabolic reactions that occur in the mitochondria of cells and play a crucial role in the production of energy. However, under certain metabolic conditions, the flux through the TCA cycle can be reduced due to an increase in TCA cycle inhibitors.

One such inhibitor is ATP, which is the primary energy currency of the cell.

When ATP levels are high, it signals to the cell that there is enough energy available and there is no need to produce more through the TCA cycle.

As a result, the activity of the TCA cycle is reduced, leading to a decrease in the production of energy.

To know more about TCA cycle, refer here:

https://brainly.com/question/15561070#

#SPJ11

The answers to the virtual lab that specifies the use of a virtual spectrometer is given below:

2. Space consists of bodies with different types of electromagnetic spectrum.

This includes high-energy bodies emitting radiation in short wavelengths and extremely short wavelengths such as in UV spectrum, X rays, and gamma rays.

Conversely, other bodies might be emitting radiations in longer wavelengths such as Microwaves and Radio waves.

Since these radiations are at two different ends of the electromagnetic spectrum, a large number of equipment would be required for individually studying these space-based radiation sources and their characteristics.

3. The element missing from the moons and the planets would be Oxygen. It is to be remembered that Oxygen forms the base of the sustenance of life forms on Earth and forms an indispensable part of the carbon cycle. In the absence of oxygen, these planets and moons remain lifeless.

4. Stars emit heat and light. Along with the heat and light, radiations are emitted by the star. These radiations travel outward from stars and work as the signature of the stars. By analyzing the radiations from the stars, scientists back on Earth could deduce the physical conditions in the heart of a star including its constitution, temperature, and surface conditions.

E.g., If the star is emitting radiation in longer wavelengths, this is an indication that the star is cooling down and the temperature is relatively low.

5. The knowledge of the constitution of the elements making up the moon or planet is necessary to ascertain the life-sustaining capability of the same. Through adequate knowledge of the composition of the moon/planet, the possibility of the life-sustaining ability of the same could be deduced.

Read more about electromagnetic spectrum here:

https://brainly.com/question/25847009

#SPJ1

The option where the most likely oxidation state and electronic configuration for a ruthenium cation is 3+ oxidation state, [Kr] 5s04d5. The correct answer C.

Ruthenium is a transition metal that belongs to Group 8 of the periodic table. It has several possible oxidation states, including +2, +3, +4, +5, and +6, with the +3 oxidation state being the most common. In this state, ruthenium has lost three electrons and has a +3 charge.

The +3 oxidation state is the most stable for ruthenium because it is close to a half-filled 4d subshell, which is a particularly stable electronic configuration. In the +3 oxidation state, ruthenium has three electrons in the 4d orbital, which is one electron away from a half-filled subshell.

Complete question:

Predict which of these is the most likely oxidation state and electronic configuration for a ruthenium cation:

A)2+ oxidation state, [Kr] 5s04d5

B)1+ oxidation state, [Kr]5s24d5

C)3+ oxidation state, [Kr] 5s04d5

D)3+ oxidation state, [Kr] 5s24d6

E)8+ oxidation state, [Kr]5s04d0

Learn more about The electronic configuration of a ruthenium cation:

https://brainly.com/question/1594176

#SPJ4

1) Element 35 is a gas

2) It would be in period 7

3) It would be a non metal

4) At would look more like iodine because both of them are closer down the group.

5) It can act both as metal and non metal.

6) Atom is neutral while ions have a charge

7) The second ionization energy is larger because it would take more energy to remove an electron from a positive specie

a) Cl has the largest atomic radius

b) Ca has the largest atomic radius

c) Cl has the largest atomic radius

8) In order of increasing atomic radius we have; Ar < Kr < Xe

The periodic table is a tabular arrangement of the chemical elements, organized on the basis of their atomic number, electron configurations, and chemical properties.

The periodic table is one of the most important tools in chemistry, as it provides a convenient way to identify and categorize the elements. The elements are arranged in rows and columns, with elements in the same row having similar chemical and physical properties. The periodic table is used by scientists and students to understand the properties of elements, predict the chemical behavior of substances, and form hypotheses about new elements that have not yet been discovered.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

Change in energy = 207. kJ - 181. kJ = 26. kJ

What is energy?

Energy is the ability to do work. It is the capacity to do something or to cause change. It can be found in many forms such as kinetic, electrical, chemical, nuclear, gravitational, thermal, and sound energy. It is all around us and is necessary for life. It is used to power everyday activities and to provide heat, light and motion. It can be produced by natural sources such as the sun or through human efforts such as burning fossil fuels. Energy can also be stored in batteries, fuel cells and other forms. Knowing how to use energy efficiently is important in today's world.

Therefore, Change in energy = 207. kJ - 181. kJ = 26. kJ

To learn more about energy

Here: https://brainly.com/question/2003548

#SPJ4

The number of CFUs in the original sample for Plate 3 is 460 CFUs.

CFU stands for "colony-forming unit". It is a unit of measurement to estimate the number of viable bacteria or fungal cells in a sample. When a small number of microorganisms are present in a sample, it is not practical to count each individual cell. Instead, a dilution series is typically performed, where the sample is diluted in a series of steps and then plated onto a culture medium. Each viable cell is capable of growing into a visible colony on the culture medium. By counting the number of colonies formed on the plates, the number of CFUs per unit volume of the original sample can be estimated. The CFU is a useful measure because it reflects the number of viable cells that are capable of growing and potentially causing an infection or disease.

To calculate the number of CFUs in the original sample, we can use the following formula:

Number of CFUs = (colony count / volume plated) x dilution factor

Where:

colony count: the number of colonies counted on the plate

volume plated: the volume of the diluted sample plated on the plate (in mL)

dilution factor: the dilution factor of the sample (i.e. the reciprocal of the dilution used to prepare the sample)

Using the given data, we can calculate the number of CFUs in the original sample as follows:

For Plate 3:

Volume plated = 0.1 mL (since only 0.1 mL was inoculated instead of 1 mL)

Dilution factor = 1/1,000,000 = 0.000001 (since the sample was diluted 1:1,000,000)

Colony count = 46

Number of CFUs = (46 / 0.1) x 0.000001 = 460 CFUs

Therefore, the number of CFUs in the original sample for Plate 3 is 460 CFUs.

To know more about microorganisms, visit:

https://brainly.com/question/6699104

#SPJ1

Here are four possible empirical formula of binary ionic compounds that can be formed from the given ions MgI2, Al2S3, MgS, AlI3.

The empirical formula of a compound is the simplest whole-number ratio of atoms in the compound. To determine the empirical formula, we need to divide the subscripts in the molecular formula (if given) by the greatest common factor to get the simplest ratio. If we are not given a molecular formula, we can determine the empirical formula from the masses or percentages of the elements in the compound.

To write the empirical formula of a binary ionic compound, we need to combine a cation (positively charged ion) with an anion (negatively charged ion) in a way that balances the charges.

Magnesium iodide: Mg2+ + 2I- -> MgI2 (the charges balance as 2(+2) = 2(-1))

Aluminum sulfide: Al3+ + 3S2- -> Al2S3 (the charges balance as 3(+3) = 2(-2) + 3(-2))

Magnesium sulfide: Mg2+ + S2- -> MgS (the charges balance as 1(+2) = 1(-2))

Aluminum iodide: Al3+ + 3I- -> AlI3 (the charges balance as 3(+3) = 3(-1))

To know more about ionic compounds here

https://brainly.com/question/26126708

#SPJ4

The orbital can only take two electrons.

The maximum number of electrons that an orbital can contain is determined by its angular momentum quantum number, "l", and its spin quantum number, "m_s". For a given value of "l", an orbital can contain 2l + 1 electrons with different values of "m_s", each of which can have either spin "up" (m_s = +1/2) or spin "down" (m_s = -1/2). The maximum number of electrons in an orbital is thus 2(2l + 1), with half of the electrons having one spin orientation and the other half having the opposite spin orientation.

We know that we can be able to obtain the number of electrons by looking at the quantum numbers;

n = 6

l = 1

ml = -1

Since we know that it is a px orbital then it can take two electrons.

Learn more about quantum numbers:https://brainly.com/question/16977590

#SPJ1

The most volatile of the following compounds is CH4.

Volatile compounds are those that have a high vapor pressure and can easily evaporate into a gas at room temperature. This is typically due to weak intermolecular forces, such as dispersion forces, that allow the molecules to easily escape from the liquid phase.

In this case, CH4 (methane) is the most volatile because it has the weakest intermolecular forces among the compounds listed. It is a nonpolar molecule with only dispersion forces between its molecules, making it easy for it to evaporate into a gas.

The other compounds listed, CBr4, CCl4, CF4, and C6H14, all have stronger intermolecular forces, such as dipole-dipole forces or hydrogen bonding, that make them less volatile and less likely to evaporate at room temperature.

Therefore, the correct answer is A. CH4.

To know more about volatile compounds, refer here:

https://brainly.com/question/1163824#

#SPJ11

Therefore, there are 3.011 x 10²³ hydrogen ions in 0.5 grams of hydrogen ions. Therefore, there are 5.42 x 10²⁴ atoms in 54 grams of water.

An atom is the basic unit of matter consisting of a nucleus of protons and neutrons, surrounded by a cloud of negatively charged electrons. Atoms are the building blocks of all elements and combine to form molecules and compounds. The properties of an element are determined by the number and arrangement of its atoms.

Here,

a) To determine the number of hydrogen ions in 0.5 grams, we need to first calculate the number of moles of hydrogen ions and then use Avogadro's number to convert to the number of ions.

The molar mass of hydrogen ion (H+) is approximately 1 g/mol.

Number of moles of hydrogen ions = mass/molar mass = 0.5 g / 1 g/mol = 0.5 mol

Number of hydrogen ions = Avogadro's number x number of moles = 6.022 x 10²³/mol x 0.5 mol = 3.011 x 10²³ hydrogen ions

b) To determine the number of atoms/ions in 54 grams of water, we need to first calculate the number of moles of water and then use Avogadro's number to convert to the number of atoms/ions.

The molar mass of water (H2O) is approximately 18 g/mol.

Number of moles of water = mass/molar mass = 54 g / 18 g/mol = 3 mol

Each water molecule contains 3 atoms (2 hydrogen atoms and 1 oxygen atom). Therefore, the number of atoms in 3 moles of water is:

Number of atoms = Avogadro's number x number of moles x 3 = 6.022 x 10²³/mol x 3 mol x 3 = 5.42 x 10²⁴ atoms

To know more about atom,

https://brainly.com/question/13973654

#SPJ1

The correct total ionic equation for the reaction between sodium hydroxide and magnesium chloride is

option f. MgCl2 (aq) + 2 NaOH (aq) → Mg(OH)2 (s) + 2 NaCl (aq).

Here's the step-by-step explanation:

1. First, we need to write the balanced chemical equation for the reaction between sodium hydroxide and magnesium chloride. This equation is: MgCl2 (aq) + 2 NaOH (aq) → Mg(OH)2 (s) + 2 NaCl (aq)

2. Next, we need to write the total ionic equation by breaking all of the soluble compounds into their respective ions. This gives us: Mg2+ (aq) + 2 Cl- (aq) + 2 Na+ (aq) + 2 OH- (aq) → Mg(OH)2 (s) + 2 Na+ (aq) + 2 Cl- (aq)

3. Finally, we can cancel out the spectator ions, which are the ions that appear on both sides of the equation and do not participate in the reaction. In this case, the spectator ions are Na+ and Cl-. This gives us the net ionic equation: Mg2+ (aq) + 2 OH- (aq) → Mg(OH)2 (s)

So, the correct total ionic equation for the reaction between sodium hydroxide and magnesium chloride is option f. MgCl2 (aq) + 2 NaOH (aq) → Mg(OH)2 (s) + 2 NaCl (aq).

To know more about sodium hydroxide, refer here:

https://brainly.com/question/29327783#

#SPJ11

Answer: [A]t = -kt + [A]₀ or when you rearrange the equation [A]t - [A]₀ = -kt

Explanation:

Below are the integrated rate laws for zero, first and second order reactions.

Zero Order

[A]t = -kt + [A]₀

First Order

ln[A]t = -kt + ln[A]₀

Second Order

1/[A]t = kt + 1/[A]₀

K = Ae^-(Ea/RT) is the Arrhenius equation

The metals that would act as the sacrificial anode that is cathodic protection for the iron is the correct option is a. Al and b. Zn.

a) Al is the sacrificial anode as it is higher than the iron in the reactivity series. Therefore, it is the more reactive than the iron.

b) Zn  is the sacrificial anode as it is higher than the iron in the reactivity series. Therefore, it is the more reactive than the iron.

c) Pb cannot acts as the sacrificial anode for the iron as it is lower than the iron in the reactivity series. Therefore, it is less reactive than the iron.

d) Na cannot acts as the sacrificial anode for the iron as it is lower than the iron in the reactivity series. Therefore, it is less reactive than the iron.

e) Ni cannot acts as the sacrificial anode for the iron as it is lower than the iron in the reactivity series. Therefore, it is less reactive than the iron.

To learn more about sacrificial anode here

https://brainly.com/question/29822341

#SPJ4

The option that would only dump the data definitions and not the data of the mydatabase to backup.sql is pg_dump -s mydatabase > backup.sql.

a. pg_dump mydatabase > backup.sql will dump the entire contents of the database, including both the data and the data definitions.

b. pg_dump -a mydatabase > backup.sql will dump only the data (i.e., it will append to the file) and not the data definitions.

c. pg_dump -s mydatabase > backup.sql will dump only the data definitions (i.e., the schema) and not the data.

d. pg_dump -d mydatabase > backup.sql will dump both the data and the data definitions.

Hence the correct option is C.

To know more about backup.sql here

https://brainly.com/question/13429347

#SPJ4

Throughout the Korean War, South Korea received significant support from the United States.

Throughout the Korean War, the United States significantly supported South Korea militarily, economically, and politically. This involved deploying US soldiers to fight alongside South Korean forces, supplying them with equipment and supplies, and taking part in talks with North Korea. As part of its military assistance, the United States sent personnel and supplies, supported air and sea operations, and provided arms and ammunition. In the years following the war, the U.S. also gave South Korea economic and military assistance, assisting in the nation's reconstruction and fortifying its defences.

learn more about Korean War Refer:brainly.com/question/11375126

#SPJ4

complete question:What part did the United States play in the Korean War when it came to supporting South Korea? a.Building up a supply of hydrogen bombs. b. Supporting South Korea in the Korean War. c. Having a moon landing as a goal. d. Starting the Airlift to Berlin.

Option( A) It maintains the same speed, (B) It continues in the same direction and option ( E) It has zero acceleration  is true about a car with constant velocity.

Constant velocity refers to a state of motion where an object moves in a straight line at a constant speed. In other words, an object that moves at a constant velocity has a consistent speed and direction of motion.

It's important to note that constant velocity does not mean that the object is stationary or moving at a slow speed. It simply means that the object is moving at a constant speed in a straight line without changing direction.

Learn about Constant velocity here https://brainly.com/question/3052539

#SPJ1

MgCl2: In an aqueous solution of MgCl2, the ions occur as Mg2+ and Cl–.

Na2SO4: In an aqueous solution of Na2SO4, the ions occur as Na+ and SO42-.

NH4Br: In an aqueous solution of NH4Br, the ions occur as NH4+ and Br–.

1. MgCl2: In an aqueous solution of MgCl2, the ions occur as Mg2+ and Cl–. This is represented by the scene "A" where two positive (+) ions and two negative (-) ions are shown. The equation for this is: MgCl2 → Mg2+ + 2Cl–

2. Na2SO4: In an aqueous solution of Na2SO4, the ions occur as Na+ and SO42-. This is represented by the scene "C" where two positive (+) ions and two negative (-) ions are shown. The equation for this is: Na2SO4 → 2Na+ + SO42-

3. NH4Br: In an aqueous solution of NH4Br, the ions occur as NH4+ and Br–. This is represented by the scene "B" where one positive (+) ion and one negative (-) ion are shown. The equation for this is: NH4Br → NH4+ + Br–

learn more about aqueous solution Refer:brainly.com/question/14097392

#SPJ4