Build a sequence detector for the following binary input sequence: 000, where the left-most binary input happened first. The sequence detector should detect all instances of the target sequence by outputting 1 when the sequence is detected and when the sequence is not detected. Example, a sequence detector for the different sequence 1101 should have the following pattern. IN : 0 1 1 0 1 1 0 1 0 1 OUT: 0 0 0 0 1 0 0 1 0 0 T
he 1-bit input to this sequence detector is called i. The 1-bit output to this sequence detector is called o.

Whitelisting is an application endpoint protection rule that, unless modified, implicitly blocks.

In accordance with the cybersecurity strategy known as "whitelisting," a user is only allowed to carry out operations on their computer that an administrator has expressly and in advance approved. Instead of attempting to keep one step ahead of cyber-attackers to recognize and stop bad code, IT staff instead creates a list of allowed programmed that a computer or mobile device can access. In essence, the user is restricted to a small set of functionalities, and the administrator has given permission for them to use those functions. When applied properly, whitelisting is a pretty strict lock-down method that can stop many cybersecurity problems. It requires careful setup and adequate continuous maintenance, isn't a perfect defense against attacks, and can be fairly cumbersome and inconvenient for users.

Learn more about Whitelisting here:

https://brainly.com/question/30032939

#SPJ4

Extremely high engine temperatures can be the result of poor cooling caused by an improper fuel grade, a too lean mixture, a lack of lubrication, or a lack of airflow over the engine.

What function does engine oil serve?

To prevent friction and needless power loss, engine oil has to lubricate every part of the engine.

Since it will burn gasoline more efficiently, a well-lubricated engine will operate more smoothly. However, taking care lubrication is only one of many tasks.

The surfaces and parts that are sensitive to friction are protected when friction diminishes. To increase the parts' lifetime, wear is minimised.

Additionally, corrosion is prevented from developing on the surface of engine parts by a proper engine oil.

To know more about engine, visit: https://brainly.com/question/12975863

#SPJ4

Employing the game's mechanics to advance and succeed while playing fairly. Long-term, this will increase the game's enjoyment and satisfaction.

A Class 3 vehicle is the Lamborghini Veneno from 2014. This car is one of the most expensive and rarest in real life, and it costs 5.5 million in-game dollars.

object_list = []

time_interval = 500 # 500 milliseconds == 0.1 seconds

next_object_time = 0

while run:

   # [...]

       current_time = pygame.time.get_ticks()

   if current_time > next_object_time:

       next_object_time += time_interval

       object_list.append(Object())

import pygame, random

pygame.init()

window = pygame.display.set_mode((300, 300))

class Object:

   def __init__(self):

       self.radius = 50

       self.x = random.randrange(self.radius, window.get_width()-self.radius)

       self.y = random.randrange(self.radius, window.get_height()-self.radius)

       self.color = pygame.Color(0)

       self.color.hsla = (random.randrange(0, 360), 100, 50, 100)

object_list = []

time_interval = 200 # 200 milliseconds == 0.2 seconds

next_object_time = 0

run = True

clock = pygame.time.Clock()

while run:

   clock.tick(60)

   for event in pygame.event.get():

       if event.type == pygame.QUIT:

           run = False

       current_time = pygame.time.get_ticks()

   if current_time > next_object_time:

       next_object_time += time_interval

       object_list.append(Object())

       window.fill(0)

   for object in object_list[:]:

       pygame.draw.circle(window, object.color, (object.x, object.y), round(object.radius))

       object.radius -= 0.2

       if object.radius < 1:

           object_list.remove(object)

   pygame.display.flip()

pygame.quit()

exit()

object_list = []

time_interval = 500 # 500 milliseconds == 0.1 seconds

timer_event = pygame.USEREVENT+1

pygame.time.set_timer(timer_event, time_interval)

while run:

   for event in pygame.event.get():

       if event.type == timer_event:

           object_list.append(Object())

import pygame, random

pygame.init()

window = pygame.display.set_mode((300, 300))

class Object:

   def __init__(self):

       self.radius = 50

       self.x = random.randrange(self.radius, window.get_width()-self.radius)

       self.y = random.randrange(self.radius, window.get_height()-self.radius)

       self.color = pygame.Color(0)

       self.color.hsla = (random.randrange(0, 360), 100, 50, 100)

object_list = []

time_interval = 200 # 200 milliseconds == 0.2 seconds

timer_event = pygame.USEREVENT+1

pygame.time.set_timer(timer_event, time_interval)

run = True

clock = pygame.time.Clock()

while run:

   clock.tick(60)

   for event in pygame.event.get():

       if event.type == pygame.QUIT:

           run = False

       elif event.type == timer_event:

           object_list.append(Object())

       window.fill(0)

   for object in object_list[:]:

       pygame.draw.circle(window, object.color, (object.x, object.y), round(object.radius))

       object.radius -= 0.2

       if object.radius < 1:

           object_list.remove(object)

   pygame.display.flip()

pygame.quit()

exit()

To know more about mechanics visit:-

https://brainly.com/question/29251177

#SPJ4

1. The equivalent capacitance between terminals a-c is 2.4 μF

2. The equivalent capacitance between terminals b-c is 6μF

3. The equivalent capacitance between terminals c-d is 12 μF

Capacitance is the ability for a device to store charge

Given that the capacitance bewteen terminals a-c = a-b + b-c

Now, the capacitance between terminals b-c are in parallel.

So, for capacitances in parallel, we add their capacitances to get the equvalent capacitance.

So, the equivalent capapcitance between b-c is C = 1 μF + 2μF + 3µF = 6μF

Now C is in series with the capapcitance between terminals a-b.

Since they are in series, their equivalent capapcitance C' is

1/C' = 1/4μF + 1/C

= 1/4μF + 1/6μF

= (3 + 2)/12 μF

1/C' = 5/12 μF

C' = 12/5 μF

= 2.4 μF

So, the equivalent capacitance between terminals a-c is 2.4 μF

To find the equivalent capacitance between terminals b-c, we see that the capacitance between terminals b-c are in parallel.

So, for capacitances in parallel, we add their capacitances to get the equvalent capacitance.

So, the equivalent capapcitance between b-c is C = 1 μF + 2μF + 3µF = 6μF

So, the equivalent capacitance between terminals b-c is 6μF

Since there is only one capacitor between terminals c-d, the equivalent capacitance is equal to the value of that capacitor which is 12 μF

So, the equivalent capacitance between terminals c-d is 12 μF

Learn more about equivalent capacitance here:

https://brainly.com/question/30081142

#SPJ1

At 700 degrees C, the number of vacancies in a meter cubed of silver is approximately 3.6 * 10^16.

what is the equilibrium fraction of lattice sites?

To calculate the number of vacancies (per meter cubed) at 700 degrees C in silver (Ag), we need to first find the number of lattice sites per meter cubed and then multiply that number by the equilibrium fraction of vacant sites.

First, we can convert the density from g/cm^3 to kg/m^3:

10.35 g/cm^3 * (1 kg/1000 g) * (1 m^3/100^3 cm^3) = 10.35 * 10^-6 kg/m^3

Next, we can find the number of lattice sites per meter cubed by dividing the mass by the molar mass:

10.35 * 10^-6 kg/m^3 / (107.87 g/mol) * (1 mol/6.02 * 10^23 atoms) = 1.8 * 10^22 atoms/m^3

Finally, we can multiply the number of lattice sites by the equilibrium fraction of vacant sites to find the number of vacancies:

1.8 * 10^22 atoms/m^3 * 2 * 10^-6 = 3.6 * 10^16 vacancies/m^3

Therefore, at 700 degrees C, the number of vacancies in a meter cubed of silver is approximately 3.6 * 10^16.

To know more about equilibrium fraction, visit: https://brainly.com/question/15053229

#SPJ4

According to the Pauli exclusion principle, no two electrons in the same atom may have the exact same set of quantum numbers.

Electron configuration and the arrangement of atoms in the periodic table are both influenced by the Pauli exclusion principle. Any more electrons must move to higher energy levels because the ground state, or lowest energy levels, in an atom, can become full.

According to Hund's rule, no orbital in a sublevel can be doubly occupied until all of the orbitals in that sublevel are singly occupied. The spin is the same for every electron in singly occupied orbitals (to maximise total spin).

To know more about Pauli exclusion principle visit:-

https://brainly.com/question/28173240

#SPJ4

False. While function trees are a common method for functional analysis, there are other methods. Primary and secondary functions may have glass box or black box approaches.

No, function trees are not the only method of performing functional analysis. Other methods include function flow diagrams and value analysis. Primary and secondary functions can be analyzed using both glass box and black box approaches. The former involves looking at the internal workings of a system, while the latter looks at the system's inputs and outputs. The choice of approach depends on the level of detail required for the analysis. Overall, functional analysis is a process for understanding the intended purpose of a system and how it meets that purpose.

Learn more about Primary and secondary functions here:

https://brainly.com/question/30459793

#SPJ4

If the accelerator pedal gets stuck while driving and the engine is racing, it's a potentially dangerous situation that requires immediate action.

What precautions required during racing?

Racing, whether it's on a track or on public roads, is inherently dangerous and requires a high level of caution and preparation to ensure the safety of all participants and bystanders. Here are some precautions that should be taken during racing:

If the accelerator pedal gets stuck while driving and the engine is racing, it's a potentially dangerous situation that requires immediate action. The first step is to safely pull over to the side of the road and turn off the engine. Then, you should contact a mechanic or a tow truck to get the vehicle inspected and repaired.

Never attempt to fix the issue yourself, especially while driving. Additionally, you should never attempt to stop the vehicle by turning off the ignition or by putting the transmission in neutral, as this can result in a loss of power steering and brakes, making it harder to control the vehicle. Stay calm, assess the situation, and take appropriate action to ensure your safety and the safety of others on the road.

Learn more about racing precautions click here:

https://brainly.com/question/1071840

#SPJ4

The combineNames method combines two arrays of names into one.

String[] combinedNames = new String[first_names.length];

for (int i = 0; i < first_names.length; i++)

{

   combinedNames[i] = first_names[i] + " " + last_names[i];

}

return combinedNames;

The combineNames method takes two String arrays, one containing first names and one containing last names, and combines them into a single String array. To do this, a new String array is created with the same length as the first_names array. Then, a for loop is used to iterate over each element in the first_names array and combine it with the corresponding element in the last_names array. The combined names are then added to the combinedNames array, and when the loop finishes, the combinedNames array is returned. This method allows for easy manipulation of the two arrays and allows for the creation of a new array that contains both first names and last names.

Learn more about array here:

brainly.com/question/27041014

#SPJ4

It frequently produces million volt charges that are released as lightning bolts.

Your body will release electricity when you put your free hand near a metal object, and you'll hear a pop. A visible spark, resembling miniature lightning, will be produced when a positively charged metallic object is brought close to the negatively charged generator.

A Van de Graaff generator is an electrostatic generator that generates extremely high electric potentials by accumulating electric charge on a hollow metal globe on top of an insulated column using a moving belt. It generates power with an extremely high voltage of direct current (DC).

To know more about lightning visit:-

https://brainly.com/question/10443677

#SPJ4

The source that supplies the most commercial energy in the world today is petroleum (oil). Oil provides around 33% of the world's energy, followed by coal (27%) and natural gas (24%). Renewable energy sources such as hydro, wind, and solar combined supply around 5% of the world's energy. However, the use of renewable energy sources is growing rapidly as countries aim to reduce their greenhouse gas emissions and transition to more sustainable forms of energy.

Commercial energy is the energy consumed by businesses, industries, and households for their daily operations and activities. It is the energy used for commercial, industrial, and institutional purposes and excludes energy used for transportation or non-energy purposes. The most common sources of commercial energy include fossil fuels such as coal, oil, and natural gas, as well as nuclear and renewable energy sources such as hydropower, wind, solar, and geothermal. Commercial energy is a key driver of economic growth and development, but it also has environmental and social impacts, such as greenhouse gas emissions and air pollution, which need to be managed and mitigated.

To know more about renewable energy visit: https://brainly.com/question/17319210

#SPJ4

To put out a fire, use a CO2 fire extinguisher. The system mass initially equals the control volume, which is the tank used to store fire extinguishers. The system mass increases when the extinguisher is utilised.

Although CO2 has a low sublimation temperature (77C at 1.0atm), when it is delivered under high pressure from a fire extinguisher, solid CO2 particles are formed.

March 31, 2022. In Australia, Class E (Electrical) fires are most frequently put out by carbon dioxide fire extinguishers. A CO2 or electrical fire extinguisher is another name for them.

To know more about fire extinguisher visit:-

https://brainly.com/question/30238928

#SPJ4

A linear equation is an equation that involves variables raised to the power of one and the constant term(s). It can be written in the form:

a1x1 + a2x2 + ... + anxn = b

To calculate the missing vector, we need to solve the following linear equation:

a * v1 + b * v2 + c * v3 = v

where v1, v2, and v3 are the given vectors, v is the unknown vector, and a, b, and c are the given scalar coefficients.

We can rearrange the equation as follows:

v = a * v1 + b * v2 + c * v3

We can use NumPy to perform this calculation as follows:

import numpy as np

# Given vectors

v1 = np.array([1, 2, 3])

v2 = np.array([4, 5, 6])

v3 = np.array([7, 8, 9])

# Scalar coefficients

a = 2

b = -1

c = 3

# Calculate the missing vector

v = a * v1 + b * v2 + c * v3

print(v)

This will output the missing vector as a NumPy array.

To know more about linear equations visit:

https://brainly.com/question/29739212

#SPJ4

One of the most popular flip flips in digital circuits is the JK flip flop. A global flip flop with two inputs, the JK flip flop has the letters "J" and "K."

Although it has two inputs, typically denoted J and K, it has the input-following behaviour of the clock-driven D flip-flop. The output Q takes the value of J at the following clock edge if J and K are not the same. In honour of the device's creator, Jack Kilby, the inputs are designated J and K.

In shift registers, counters, PWM, and other devices that toggle between two states, the JK Flip-Flop is a common flipflop.

To know more about JK flip flop visit:-

https://brainly.com/question/2142683

#SPJ1

D. Workload utilization of CPU & RAM is the main factor to consider when choosing the instance type of services like Amazon RDS and Amazon Redshift.

This is because the instance type determines the amount of CPU and RAM that will be allocated to the service, and therefore directly impacts the performance and cost of the service. By choosing an instance type that matches the workload utilization of CPU and RAM, the company can ensure that they are getting the best performance for their money and not paying for resources that they do not need.

Here you can learn more about Instance Type of Service in the link https://brainly.com/question/30392133

#SPJ11

To implement the function, at least three 2-input NOR gates are required.

The four NOR gates shown below are connected to create an XNOR gate. Three times as long as one NOR gate, this construction's propagation delay.

In error-detection circuits, computational logic comparators, and arithmetic logic circuits, the XOR gate is frequently used. The Exclusive OR gate only produces an output when its two inputs are different, or when one is high (one) and the other is low (zero).

To know more about gate visit:-

https://brainly.com/question/30403860

#SPJ4

False. The statement that a hot plate is the only heat source available in the lab room to heat the hydrate in a crucible is likely not accurate in all cases.

What are the heat sources available in lab room?

There may be other heat sources available in the lab room, such as an oven, a Bunsen burner, or an infrared lamp.

The choice of heat source depends on the specific requirements of the experiment and the equipment available in the lab.

The crucible is a particular style of scientific glassware used to melt or burn solid substances over a burner. Metal or heat-resistant ceramic are used to make crucibles.

The hot plates are the equipment used in laboratories to evenly heat the samples. A variety of various heating top styles are offered with the hot plates.

To know more about crucible, please visit: brainly.com/question/29220811

#SPJ4

The first two entries of the list and the remainder of the list are extracted using pattern matching by this function. It returns a new list that consists of the first two entries, then the rest of the list.

A function is described as a relationship between a group of inputs with one output each. A function is, to put it simply, a relationship between inputs in which each input is connected to exactly one output.

Here is a possible implementation of the del3 function in OCaml:

let del3 lst =

 match lst with

 | hd1 :: hd2 :: tl -> hd1 :: hd2 :: tl

 | hd1 :: [] -> hd1 :: []

 | _ -> []

To know more about function visit:-

https://brainly.com/question/30478824

#SPJ4

In contrast to a traditional hot water heating system, a radiant heating system uses cooler water.

The highest performance from a convection heater comes from prolonged heating. A convection heater requires more time and energy to reach the desired temperature than a radiant heater. Once it reaches the goal, the heat is simple to maintain. For warmth that is more sporadic, a radiant heater is preferable.

Homeowners with hydronic (water-based) systems frequently choose hot water radiant floors as a highly comfortable home comfort choice. Hot water radiant floors are a sort of heating solution that uses hot water from a central boiler to heat the flooring in your home.

To know more about heating system visit:-

https://brainly.com/question/16579769

#SPJ4

When two binary numbers "10101" and "11011" are entered, the programme adds them together and outputs the result "110000" without any leading zeroes.

When two binary strings are joined together, a binary string is also returned as the result. Here, we must begin adding from the right side and save the carry for the following digits when the total returned is more than one.

A Python programme is provided below that adds two binary numbers that are written as strings and prints the result in binary without any leading zeroes:

def add_binary(a, b):

   # Convert binary strings to integers

   x = int(a, 2)

   y = int(b, 2)

   # Add the integers and convert back to binary

   result = bin(x + y)[2:]

   return result

# Get input from the user

input_str = input("Enter two binary numbers separated by a comma: ")

# Split the input into two binary strings

a, b = input_str.split(",")

# Add the binary numbers

sum_binary = add_binary(a, b)

# Print the sum without leading zeroes

print("The sum is:", sum_binary.lstrip("0"))

To know more about python visit:-

https://brainly.com/question/30427047

#SPJ4

Yes, you can change the code in line 2 of the BUILD-MAX-HEAP(A) procedure so that the loop index i starts from 1 and goes up to length[A]/2. This is because the loop is designed to ensure that the tree structure is preserved while maintaining the heap property.

The loop will continue until the index i reaches 1, which means that the tree is completely organized and the heap property is preserved. As long as the loop starts at 1 and goes up to length[A]/2, the tree structure and the heap property are both maintained.

Learn more about coding: https://brainly.com/question/16397886

#SPJ11

a) The resulting rock from the slowly cooled and quickly discharged lava flow is likely to be a porphyritic rock, with larger crystals (phenocrysts) embedded in a fine-grained matrix.

Note: that the resulting microtexture (i.e., how a thin section from the cooled lava flow would look like under the microscope) is given in the attached image.

b) The rock that formed from the slowly cooled and fully crystallized melt would be aphanitic in texture, with uniformly sized crystals that give the rock a smooth and uniform appearance. The proper name for this type of rock is igneous plutonic rock.

Igneous plutonic rock is a type of rock formed from solidified magma that cooled and crystallized slowly beneath the Earth's surface.

These rocks are characterized by large mineral grains and are generally coarser-grained than their volcanic counterparts. Examples of plutonic rocks include granite and gabbro. They form the Earth's crust and make up the majority of the continents.

Learn more about Rocks:
https://brainly.com/question/6565164
#SPJ1

To determine the crystal structure possible for this material, we need to calculate the atomic packing factor (APF) for each of the four possible crystal structures and compare it to the density of the material.

APF is the fraction of the total volume of a unit cell occupied by atoms. For a cubic unit cell, the APF can be calculated using the formula APF = (number of atoms per unit cell) x (volume of each atom) / (volume of unit cell). Cesium chloride (CsCl) structure: In this structure, each corner of the cube is occupied by a Cs ion and the center of the cube is occupied by a Cl ion. The number of atoms per unit cell is 2. Zirconium oxide (ZrO2) structure: In this structure, each Zr ion is surrounded by eight O ions at the corners of a cube and each O ion is surrounded by four Zr ions at the center of each face of the cube. The number of atoms per unit cell is 5. Rock salt (NaCl) structure: In this structure, each corner of the cube is occupied by either a Na ion or a Cl ion. The number of atoms per unit cell is 2.

Learn more about atoms here:

https://brainly.com/question/30898688

#SPJ4

Braking distance refers to the distance a car travels after the brakes are applied until the car comes to a complete stop.

It does not include the time it takes for a driver to recognize a hazard and move their foot from the gas to the brake or the time it takes to apply the brakes after the driver applies them.

Hence, the time taken from when the brake is applied and when the vehicle eventually comes to a stop is known as the braking distance.

Read more about braking distance here:

https://brainly.com/question/4085091

#SPJ1

The maximum voltage across C1 is 10V in the circuit.

To calculate the maximum voltage across C1, we can use the following formula:

Vmax = Vp / √2

Where Vp is the peak voltage of the transformer output, and √2 is the square root of 2.

Given that the output of the transformer has an amplitude of 10V, we can calculate Vp as follows:

Vp = 10V * √2 = 14.14V

Therefore, the maximum voltage across C1 is:

Vmax = 14.14V / √2 = 10V

So the maximum voltage across C1 is 10V.

It is important to note that this calculation assumes mathematically ideal diodes, which means that there is no voltage drop across the diodes. In reality, there will be a small voltage drop across the diodes, which will slightly reduce the maximum voltage across C1.

Learn more about diodes

https://brainly.com/question/30899329

#SPJ11

The CTR (Counter) operation mode should be employed for read/write efficiency. Each block's encryption in CTR mode is carried out independently of every other block, allowing for parallel encryption.

White space, color, repetition, proportionality, movement, , balance and aligning are all effective design elements. Design must serve a function, which sets it apart from art.

Using lines and columns that create a grid, the rule of three is a technique for dividing an image or layout into various pieces. Three equally spaced columns and row form the grid, which results in nine identical boxes than fit over the photo.

To know more about design visit:

https://brainly.com/question/30524467

#SPJ4

The correct answer is 3.37 x 10-19 Joules.E= hc/lambda is the formula used to calculate the energy contained in a mole of photons, where h is the Planck constant, c is the speed of light, and is the wavelength of light.

The wavelengths of visible light split into the rainbow's hues as it passes through a prism because each color has a unique wavelength. Red has a wavelength of around 700 nanometers, whereas violet has a wavelength of about 380 nanometers. The wavelength and frequency of red light are 700 nm and 4.3*1014 Hz, respectively. Only a small portion of the entire electromagnetic spectrum is visible light. UV, X, and gamma rays are examples of electromagnetic waves with shorter wavelengths and higher frequency.

To learn more about wavelength click on the link below:

brainly.com/question/13533093

#SPJ4

C++ also uses lexicographic ordering to compare strings. This means that the strings are compared character by character from left to right, with the first differing character determining the ordering.

In C++, a pointer is a variable that stores the memory address of another variable. Pointers provide a way to access and manipulate memory directly, which can be useful in various programming scenarios. Using pointers, it is possible to dynamically allocate and deallocate memory, pass data between functions efficiently, and access hardware resources directly. Pointers are essential for data structures like linked lists, trees, and graphs, where nodes are connected through pointers. Pointers are also used extensively in low-level programming, such as in device drivers, operating systems, and embedded systems. However, working with pointers requires careful handling to avoid errors like null pointer exceptions or memory leaks.

To know more about Lexicographic visit:

https://brainly.com/question/29855401

#SPJ4

The level of detail in the view. The level of detail can be adjusted by adding or removing dimensions from the view. The aggregation function can also be changed to control how measures are summarized at different levels of detail.

In Tableau, you can change the granularity of a view by adding or removing dimensions from the view. Dimensions define the level of detail in the view and determine the number of marks displayed. By adding more dimensions, you can increase the granularity and display more detailed information in the view. On the other hand, removing dimensions can decrease the granularity and display more summarized information. You can add or remove dimensions by dragging and dropping them from the available fields section to the rows or columns shelf, or by using the drop-down menu on the dimension in the view.

To know more about Dimensions visit:

https://brainly.com/question/28688567

#SPJ4

Espionage is  one of the following is an example of a disclosure threat.

What is Espionage ?

Espionage is the act of obtaining confidential or sensitive information by unauthorized means, typically through spying or covert means. This information may be related to national security, business secrets, scientific research, or other sensitive information. Espionage is often carried out by individuals working for governments, intelligence agencies, or criminal organizations for the purpose of gaining strategic advantage or economic benefit.

Espionage can take many forms, including hacking into computer systems, intercepting communications, recruiting insiders, or using physical means to access information.

The correct answer is c. Espionage, as it is an example of a disclosure threat.

A disclosure threat is a security risk that results in the unauthorized release of confidential or sensitive information. Espionage refers to the act of obtaining confidential or sensitive information by unauthorized means, typically through spying or covert means. This constitutes a threat to the confidentiality of the information, as it may be disclosed to unauthorized parties who can use it for malicious purposes.

The other options (alteration, denial, and destruction) are not examples of disclosure threats. Alteration refers to unauthorized changes to information, denial refers to the prevention of access to information, and destruction refers to the complete deletion or destruction of information. These are different types of security risks that have different impacts on the confidentiality, availability, and integrity of information.

Learn more about Espionage click here:

https://brainly.com/question/29547097

#SPJ4