Briefly describe how the Great Firewall of China could build a system to block access to selected hosts on the internet using DNS, while letting all other traffic through.

The overall speedup of the system due to the disk upgrade is 70% (rounded to the nearest integer percent).

Assuming that the 65% of time spent on I/O is the bottleneck and cannot be improved further by any other means.

The overall speedup of the system due to the disk upgrade can be calculated as follows:

Let the time spent on I/O before the upgrade be T_io and the time spent on non-I/O operations be T_nio.

Let the throughput of the old disk be D_io and the throughput of the new disk be D_io'.

Let the fraction of time spent on I/O after the upgrade be f_io' (i.e., the bottleneck remains the same).

Then, we have T_io = 0.65 * (T_io + T_nio) and T_nio = 0.35 * (T_io + T_nio).

Also, we have D_io' = 1.5 * D_io (i.e., the new disk provides 50% greater throughput).

The total time taken by the system after the upgrade is T_total' = T_io/f_io' + T_nio = (T_io + T_nio)/(0.65*f_io' + 0.35).

The speedup due to the upgrade is S = T_total/T_total' = T_io/f_io' + T_nio/T_total' = (0.65 * T_io/D_io') + (0.35 * T_nio/T_total').

Substituting the given values, we get:

S = (0.65 * 0.65) + (0.35 * 0.35)/(0.65 * 1.5) + (0.35/(0.65 * 1.5 + 0.35)) = 0.7028 or 70.28%.

Therefore, the overall speedup of the system due to the disk upgrade is 70% (rounded to the nearest integer percent).

Learn more about speedup here:

https://brainly.com/question/31176774

#SPJ11

The use of UDP in VXLAN enabled routers allows them to apply hashing algorithms on the outer UDP header to load balance network traffic.

This is because VXLAN (Virtual Extensible LAN) is a tunneling protocol that encapsulates Layer 2 Ethernet frames within Layer 3 UDP packets. By using UDP, VXLAN can take advantage of network devices that support Equal-Cost Multipath (ECMP) routing to distribute traffic across multiple paths. The hashing algorithms applied to the outer UDP header can help ensure that traffic is distributed evenly across the available paths. This can improve network performance and scalability, especially in large data center environments where traffic loads can be heavy and complex.

Learn more about routers here:

https://brainly.com/question/29869351

#SPJ11

Answer:

9/17 = 0.529, or approximately 53%.

Explanation:

To calculate the miss rate, we need to know how many cache misses occurred during these memory accesses.

Assuming that we have a cache with a block size of 4 bytes, we can split the memory accesses into blocks:

Block 0: 0, 4

Block 2: 8, 12

Block 4: 16

Block 2: 12

Block 1: 8

Block 0: 4

Block 1: 12

Block 2: 16

Block 1: 12

Block 0: 8

Block 1: 4

Block 2: 0

Block 1: 8

Block 0: 12

Block 1: 16

Block 2: 12

Block 1: 8

Block 0: 4

We can see that there were a total of 9 cache misses.

To compute the miss rate, we need to divide the number of misses by the total number of memory accesses, which is 17 in this case.

Therefore, the miss rate is 9/17 = 0.529, or approximately 53%.

Please give brainliest

def spayedDogs():

   # implementation of spayedDogs function

The spayedDogs() function will print out the top ten percentages and breeds of dogs that are spayed/neutered. To achieve this, we need to maintain two dictionaries: one to store the total number of dogs of each breed, and another to store the total number of spayed/neutered dogs of each breed.

We can iterate through these dictionaries to calculate the percentage of spayed/neutered dogs for each breed and sort them in descending order to get the top ten breeds with the highest percentage of spayed/neutered dogs.

We can then print out the breed name and percentage for each of these top ten breeds. The implementation of this function will require careful management of these two dictionaries and some additional data processing to calculate the percentages.

For more questions like Data click the link below:

https://brainly.com/question/10980404

#SPJ11

With this alert rule in place, any incoming UDP traffic with a source IP address and a destination IP address on port 5555 will be analyzed, and an alert will be triggered if there is any suspicious or anomalous behavior detected.

How to create an alert rule?

To create an alert rule for UDP, the following steps can be taken:

1. In your monitoring or alerting system, navigate to the alert rules section.
2. Click on the "Create Rule" or "New Alert Rule" button to start creating a new rule.
3. Select the protocol as "UDP" in the rule configuration settings.
4. In the "Source IP Address" field, choose the option "Any" as the rule should analyze any source IP address.
5. In the "Destination IP Address" field, specify the IP address of the destination that needs to be monitored.
6. In the "Destination Port" field, input the port number "5555" as the rule should analyze any destination IP address on port 5555.
7. Configure the rest of the rule parameters as per your requirements.
8. Save the rule and activate it.

Using these steps one creates an alert rule for UDP.

To  know more about  UDP visit:

https://brainly.com/question/31795203

#SPJ11

Bluetooth Low Energy conserves battery power.

Bluetooth Low Energy, also known as Bluetooth Smart, is a wireless communication protocol designed for low-power devices that require battery efficiency. This means that instead of constantly transmitting large amounts of data, Bluetooth Low Energy devices will only send small packets of data when needed, thus reducing the energy consumption. This also makes it an ideal choice for IoT devices, as it allows for longer battery life and less frequent battery replacements.

Bluetooth Low Energy (BLE) is a wireless communication technology designed for low-power consumption, making it ideal for IoT devices. While it does not provide higher speeds than other IoT transmission standards or supply energy to power other devices, its main advantage is its ability to conserve battery power, enabling devices to operate for longer periods without frequent recharging or battery replacement.

To know more about power visit:-

https://brainly.com/question/14883375

#SPJ11

Therese's presentation with arithmetic errors is an example of poor attention to detail and lack of quality control in the presentation.

When preparing a presentation, it is important to double-check all the details and ensure that there are no errors or mistakes that can be distracting to the audience. In this case, the arithmetic errors in Therese's PowerPoint slides are causing Kathy to lose focus and potentially miss important information.

In this scenario, Therese has made several arithmetic errors on her PowerPoint slides, causing Kathy to be distracted during the presentation. This demonstrates that attention to detail is important in presentations to maintain the audience's focus and effectively convey information.

To know more about Presentation visit:-

https://brainly.com/question/15071942

#SPJ11

The maximum application message size when UDP (User Datagram Protocol) is used at the transport layer is determined by the maximum transmission unit (MTU) of the underlying network. The MTU is the largest size of data packet that can be transmitted over the network without fragmentation.

In general, the maximum application message size for UDP is limited to the MTU minus the size of the UDP and IP headers. The size of the UDP header is fixed at 8 bytes, while the size of the IP header varies depending on the IP version (IPv4 or IPv6) and the specific options used.

For IPv4 networks, the MTU is typically 1500 bytes, which means that the maximum application message size for UDP is approximately 1472 bytes (1500 - 28 = 1472). For IPv6 networks, the MTU is typically 1280 bytes, which means that the maximum application message size for UDP is approximately 1272 bytes (1280 - 8 - 40 = 1272).

However, it is important to note that fragmentation of UDP datagrams can cause problems in network performance and reliability. To avoid fragmentation, applications should use message segmentation techniques, such as message fragmentation, or use alternative protocols, such as TCP (Transmission Control Protocol), which handles fragmentation and reassembly automatically.

Learn more about UDP here:

https://brainly.com/question/13853119

#SPJ11

In this network configuration, you are most likely to experience collisions.

The hub acts as a central point for all the devices connected to it, and any data transmitted by one device must pass through the hub before reaching its destination. As more devices are connected to the hub, the amount of data being transmitted increases, causing the hub to become a bottleneck for network traffic.

Hubs operate at the physical layer of the OSI model and broadcast data to all connected devices. When multiple devices try to transmit data simultaneously through the hub, it can result in collisions. Collisions can decrease network performance, cause delays, and lead to data loss.

To know more about  Network visit:-

https://brainly.com/question/29768881

#SPJ11

There are a total of 168 registers in this RISC processor.

To find the total number of registers in a RISC processor with 8 global registers and 10 register windows, where each window has 4 input registers, 8 local registers, and 4 output registers, we need to calculate the number of registers in each category and add them up.

Step 1: Count global registers
There are 8 global registers.

Step 2: Count registers in register windows
Each register window has 4 input, 8 local, and 4 output registers.
Total registers per window = 4 input + 8 local + 4 output = 16 registers per window.

Step 3: Calculate total registers in all register windows
There are 10 register windows.
Total registers in all windows = 10 windows × 16 registers per window = 160 registers.

Step 4: Calculate total registers in the CPU
Total registers in the CPU = global registers + registers in all windows
Total registers = 8 + 160 = 168 registers.

To learn more about RISC processor, visit:

https://brainly.com/question/28393992

#SPJ11

To display the correct maximum value for any list of integers, you need to write a program or function that iterates through the list and compares each element to a variable holding the current maximum value. If an element is greater than the current maximum value, it replaces the maximum value variable.

Here's an example code in Python:

python

Copy code

def find_max(lst):

   max_val = float('-inf')

   for num in lst:

       if num > max_val:

           max_val = num

   return max_val

In this code, we start by initializing the maximum value variable max_val to negative infinity, which ensures that any value in the list will be greater than it. Then, we iterate through each element in the list lst and compare it to max_val. If the element is greater than max_val, we update max_val to be the new maximum value.

Once we have iterated through all the elements in the list, we return the final value of max_val, which will be the maximum value in the list.

By using this approach, we can find the correct maximum value for any list of integers, regardless of its size or contents.

Learn more about maximum value here:

https://brainly.com/question/14316282

#SPJ11

If the sales amount is between 1000 and 5000 (inclusive), the commission rate is set to 0.15. Otherwise, the commission rate is set to 0.20.

Here is an example program in Python that asks the user to enter a sales amount, calculates the commission based on the sales amount using an if/else if/else statement, and then prints the commission amount:

python

Copy code

sales = float(input("Enter the sales amount: "))

commission_rate = 0.0

if sales <= 1000:

   commission_rate = 0.10

elif sales <= 5000:

   commission_rate = 0.15

else:

   commission_rate = 0.20

commission = sales * commission_rate

print("The commission on ${:.2f} in sales is ${:.2f}".format(sales, commission))

In this example, the program prompts the user to enter a sales amount using the input() function and converts the input to a float using the float() function.

The program then uses an if/else if/else statement to determine the commission rate based on the sales amount. If the sales amount is less than or equal to 1000, the commission rate is set to 0.10. If the sales amount is between 1000 and 5000 (inclusive), the commission rate is set to 0.15. Otherwise, the commission rate is set to 0.20.

The program then calculates the commission by multiplying the sales amount by the commission rate and assigns the result to the commission variable.

Finally, the program uses the print() function to output the sales amount and commission amount using formatted string syntax to display the values with two decimal places.

Learn more about sales amount here:

https://brainly.com/question/7602852

#SPJ11

To format the margins of a paper, you should adjust the page layout settings. This can typically be done in most word processing software such as Microsoft Word, Ggle Dcs, or Pages on a Mac. Here are the steps to adjust the margins in Microsoft Word:

Click on the "Page Layout" tab.

Click on "Margins" and select the margin size you want (or choose "Custom Margins" to specify your own margin settings).

Once you've made your selection, the margins on your paper should adjust automatically.

It's important to note that different types of documents may require different margin settings. For example, research papers and academic essays may require 1 inch margins on all sides, while business letters may use smaller margins to fit more text on a page. Be sure to check the formatting guidelines for your specific document to ensure that your margins are correct.

Learn more about margins here:

https://brainly.com/question/15357689

#SPJ11

Both your personal tablet or smartphone and a huge data warehouse or remote server are electronic devices that store and process data.

In other words, both your personal tablet or smartphone and a huge data warehouse or remote server share the fundamental function of storing and processing data, but the latter is capable of handling much larger and more complex tasks due to its larger scale and advanced capabilities.

Your personal tablet or smartphone is a smaller device that can hold a limited amount of data and is primarily used for personal use such as communication, entertainment, and productivity.

To know more about Electronic devices visit:-

https://brainly.com/question/30735405

#SPJ11

The practice of blending tasks such as design, coding, and testing with tasks such as server provisioning and job scheduling is known as "DevOps."

DevOps aims to streamline the development and deployment process by creating a collaborative and integrated approach between the development and operations teams. By integrating these tasks, DevOps promotes faster and more reliable software delivery.

DevOps is a combination of the words "development" and "operations," and it refers to the collaborative approach between software development and IT operations teams. The goal of DevOps is to shorten the development lifecycle, improve deployment frequency, and ensure high quality and reliability in software releases.

To know more about DevOps visit:-

https://brainly.com/question/29812425

#SPJ11

32-bit std call is a calling convention used in Windows operating systems for function calls between compiled programs. It defines a standard way of passing arguments and return values between the caller and the callee.

In 32-bit std call, the number of bytes to remove from the stack is stated with the "ret X" instruction, where X represents the number of bytes to be removed. This instruction is responsible for deallocating the stack space used by the function's arguments and local variables.

The number of bytes to be removed depends on the size of the arguments passed to the function. Each argument takes up a certain number of bytes, which is determined by its data type. For example, an integer argument takes up 4 bytes in a 32-bit system, while a floating-point argument takes up 8 bytes.

In summary, the "ret X" instruction is used to remove a specific number of bytes from the stack in a 32-bit stdcall function, based on the size of the function's arguments. This is an important aspect of function calling conventions, as it ensures that the stack is properly managed and avoids memory leaks or other issues.
To know more about 32-bit std call visit:

https://brainly.com/question/982908

#SPJ11

A collision means two or more keys are mapped to the same hash value. In the context of hashing, a hash value is the result of a hash function, which is used to assign a unique identifier to a specific key or piece of data. An overload, although not directly related to hashing, generally refers to a situation where a system or process becomes overwhelmed with excessive demands or input.

In the provided answer choices, the term closest to the described scenario is "overloaded hashing." However, it is worth noting that the standard term for this phenomenon is simply "collision." Collisions can occur in any hashing technique, including normal hashing. Perfect hashing, on the other hand, is a type of hashing where no collisions occur, and each key is uniquely mapped to a hash value. While perfect hashing is ideal, it is not always achievable, especially in cases where the number of keys or the dataset size is unknown or variable. In practice, various techniques are employed to resolve collisions, such as open addressing or chaining, in order to maintain the efficiency and effectiveness of the hashing process.

To learn more about perfect hashing, here

https://brainly.com/question/29970427

#SPJ11

In an online or live data acquisition, forensic investigators use network-based tools to acquire a protected copy of the information.

This process is crucial in digital forensics, especially when dealing with systems that are currently in use or when shutting down the system may result in data loss. Live data acquisition allows investigators to collect volatile data, such as running processes, network connections, and user login sessions, which may be lost once the system is turned off.

Network-based tools play a significant role in online data acquisition as they facilitate the remote collection and preservation of digital evidence. These tools can capture data in a forensically sound manner, ensuring the integrity and admissibility of the evidence in legal proceedings. Commonly used tools include network forensics software, packet capture tools, and remote imaging solutions.

The process of online data acquisition may involve various steps, including identifying the target system, establishing a secure connection, selecting appropriate tools, and executing the acquisition process. It is essential for forensic investigators to follow best practices and standard operating procedures to maintain the integrity and authenticity of the evidence. Moreover, the acquired data should be properly documented, including information about the tools used and the methods employed during the acquisition process.

In summary, online or live data acquisition is a crucial aspect of digital forensics, enabling investigators to obtain valuable data from active systems using network-based tools. It requires meticulous planning, execution, and documentation to ensure the preservation and admissibility of digital evidence in legal proceedings.

Learn more about  Live data acquisition here: https://brainly.com/question/28233320

#SPJ11

A process is in a deadlock state if the process is blocked and no matter what transitions happen in the future, the process remains blocked.

A deadlock occurs when two or more processes are waiting for each other to release resources that they need to proceed. In other words, each process is blocked waiting for a resource that is held by another blocked process, and neither process can proceed until the other releases the required resource.

Deadlocks can occur in systems that use resource allocation mechanisms, such as semaphores or mutexes, to manage access to shared resources. To prevent deadlocks, it is necessary to ensure that the system's resource allocation mechanism is designed to prevent circular wait conditions and to provide a way to detect and recover from deadlocks if they do occur.

Learn more about  process  here:

https://brainly.com/question/29487063

#SPJ11

Nonvolatile memory on a mobile device can contain OS files and stored user data, such as a contacts list, messages, photos, videos, and other backed-up files.

Nonvolatile memory refers to a type of memory that retains its data even when the device is turned off or loses power. This type of memory is essential for storing critical data on mobile devices, as it ensures that the data is not lost during power outages or when the device is powered off. In addition to storing user data, nonvolatile memory on mobile devices also contains system files and settings required for the device to function properly. In some cases, nonvolatile memory may also include firmware updates that can improve the performance or security of the device.

Overall, nonvolatile memory plays a crucial role in ensuring the reliability and functionality of mobile devices.

Learn more about Nonvolatile memory here:

https://brainly.com/question/31362237

#SPJ11

When an aluminum crimp connector is used to connect a copper wire to a battery, there can be some potential issues that arise due to the difference in the properties of the two metals.

Aluminum has a higher rate of thermal expansion and contraction than copper, which can cause the connection to loosen over time. This can result in increased resistance and potential overheating, leading to a possible fire hazard.
Additionally, the dissimilar metals can cause galvanic corrosion to occur, which can further weaken the connection and cause it to fail. To avoid these potential issues, it is recommended to use a connector specifically designed for connecting copper and aluminum wires, or to use a wire nut or mechanical connector instead.
In short, when using an aluminum crimp connector to connect a copper wire to a battery, it is important to monitor the connection and consider alternative methods to ensure a secure and safe electrical connection.
If an aluminum crimp connector is used to connect a copper wire to a battery, you can expect galvanic corrosion to occur over time.

To know more about connector visit :-

https://brainly.com/question/31521334

#SPJ11

There are 529,308,000 different license passwords

To answer your question, let's break down the requirements for the license password.

First, we know that the password must contain exactly 6 characters. This means that we have a fixed length for the password.

Next, we know that two of the characters must be distinct numbers. This means that we have 10 options for the first number and 9 options for the second number (since we cannot repeat the first number). So, we have a total of 10 * 9 = 90 options for the number characters.

Thirdly, we know that one of the characters must be an upper-case letter. This means that we have 26 options for this character.

Finally, we have three remaining characters which can be any digit or letter (upper- or lower-case) such that there are no repetitions of any characters in the password. Since there are 62 options for each of these characters (10 digits + 26 upper-case letters + 26 lower-case letters), we have a total of 62 * 61 * 60 = 226,980 options for these characters.

To find the total number of license passwords that can be made, we simply multiply the number of options for each requirement:

90 * 26 * 226,980 = 529,308,000

Therefore, there are 529,308,000 different license passwords that can be made with the given requirements.

More questions related to password: https://brainly.com/question/15016664

#SPJ11

A process that is run in the background leaves the BASH shell available for the user to execute additional commands. When a process is started in the background, it does not block the shell prompt, allowing the user to continue using the terminal while the process runs in the background. The process can be started in the background by appending an ampersand (&) at the end of the command line.

For example, to run a script called "myscript.sh" in the background, the command would be:

$ ./myscript.sh &

The output of the script will not be displayed on the terminal, and the user can continue to execute commands in the foreground. If the user wants to bring the background process to the foreground or terminate it, they can use the appropriate commands, such as "fg" or "kill".

Learn more about BASH shell here:

https://brainly.com/question/31543090

#SPJ11

The correct statement regarding Frame Relay (FR) is: c. FR is a connection-oriented variable-sized frame standard that operates at the data link layer.

Frame Relay is a Layer 2 protocol in the OSI model, specifically designed for efficient data transmission over wide area networks (WANs). It is connection-oriented, meaning that a dedicated virtual circuit is established between two devices before data transmission begins. This ensures reliable communication between the connected devices. Frame Relay uses variable-sized frames, which allows it to accommodate different data lengths and improve the overall efficiency of data transfer. Unlike fixed-length packets, variable-sized frames do not guarantee predictable transmission delays, as larger frames may take longer to transmit. To sum up, statement c accurately describes Frame Relay, while statements a and b are incorrect. Frame Relay is a connection-oriented, variable-sized frame standard that operates at the OSI Layer 2, the data link layer.

Learn more about wide area networks here-

https://brainly.com/question/13267115

#SPJ11

To create a one-page website, you will need to first start by designing the layout of the website. You can do this by sketching a rough draft of the website on paper, or you can use a website builder such as Wix or Squarespace to design the website digitally. Once you have designed the layout of the website, you will need to add content to the website.

To begin, you will need to include a level two heading that displays your full name. You can use the HTML tag to do this. Next, you will need to include an image that represents you. This could be a picture of your pet, a place that is meaningful to you, or an object that you like. You can use the tag to add an image to your website.

After adding your heading and image, you will need to write a paragraph about yourself. This paragraph should describe who you are, what you do, and what you are passionate about. You can use the tag to add text to your website.

Now that you have added content to your website, you can add some animations to make it more interesting. You can use Dan Eden's Animate.css website to download the CSS code and link it to your HTML. This will allow you to add animations to your website without having to modify the CSS.

If you want to get more creative, you can also create your own animations using the keyframe code in Dan Eden's CSS code. The keyframe code specifies what the animation will look like at different points in time, and the CSS properties specify what the animation should look like at that point in time.

To know more about one-page website visit:-

https://brainly.com/question/11875327

#SPJ11

A tool that can be used to link CCIRs (Commander's Critical Information Requirements) to the decisions they support is called a Joint Mission Analysis Tool (JMAT).

JMAT is a planning and decision support tool used by military planners and analysts to assess the operational environment and develop courses of action. One of its features is the ability to link CCIRs to the decisions they support, which helps to provide clarity to collection and analysis resources.

By linking CCIRs to decisions, JMAT helps to ensure that collection and analysis resources are focused on the most critical information requirements. This can help to improve situational awareness, reduce the risk of surprises, and support timely and effective decision-making.

Learn more about JMAT: https://brainly.com/question/27894163

#SPJ11

Firms with rigorous deployment policies use a variety of tools and processes to ensure that their software deployments are reliable, secure, and efficient. These tools may include production servers, testing servers, authentication servers, and development servers, among others. However, there is one tool that firms with rigorous deployment policies generally do not use for that purpose, and that is development servers.

For more such question on software

https://brainly.com/question/28224061

#SPJ11

Folium is a Python library that allows users to create interactive maps using data visualization tools. It is built on top of the Leaflet JavaScript library and provides users with the ability to manipulate data in various ways.

In order to create a map of New York City using Folium, you will first need to install the library using pip. Once you have installed the library, you can begin creating your map.

To create a map using Folium, you will need to first import the library into your Python script. You can then use the Map() method to create a new map object. The Map() method takes several parameters, including the latitude and longitude of the center of the map. In this case, we want to center our map at (40.75, -74.125), which is the approximate location of New York City.

Once you have created your map object, you can add markers to it using the Marker() method. In this case, we want to add a marker for the main campus of Hunter College, which is located in Manhattan. To add the marker, we will use the Marker() method, which takes several parameters, including the latitude and longitude of the location where you want to add the marker.

Finally, to save your map as an HTML file, you can use the save() method. The save() method takes the name of the HTML file you want to create as a parameter. In this case, we want to save our map as nycMap.html.

In conclusion, using Folium to create an interactive map of New York City is a simple process. By importing the library, creating a new map object, adding markers, and saving the map as an HTML file, you can easily create a customized map that meets your needs.

To know more about Python library visit:

https://brainly.com/question/31314963

#SPJ11

802.11b and g are both wireless networking standards that use the 2.4 GHz frequency band to transmit data. The maximum range of these signals is affected by a variety of factors, including interference, obstacles, and the power of the transmitter and receiver.

Generally, 802.11b and g signals can extend up to about 150-200 feet indoors and up to 300-400 feet outdoors under ideal conditions.

However, it is important to note that these ranges are not guaranteed and can vary significantly based on the specific environment in which the wireless network is deployed. Interference from other wireless devices, such as cordless phones or microwaves, can significantly reduce the range of 802.11b and g signals. Additionally, thick walls, metal barriers, and other obstacles can also weaken or block the signal, further limiting the range of the wireless network.

To ensure reliable wireless connectivity, it is important to carefully plan and configure the wireless network, including selecting appropriate wireless equipment, optimizing the placement of access points, and minimizing sources of interference.

Learn more about 802.11b here:

https://brainly.com/question/28588516

#SPJ11

The main problem with busy waiting is that it wastes CPU cycles and other system resources while the waiting task continuously checks for the event to occur.

This can significantly slow down the overall system performance and waste energy. Additionally, busy waiting is not an efficient way to handle tasks that require long periods of waiting, as it consumes CPU time that could be used for other tasks.

Another problem with busy waiting is that it can lead to a race condition, where multiple tasks are waiting for the same event, and each task is continuously checking for the event to occur. In such a scenario, the system can become unstable and unresponsive.

To avoid these problems, modern systems use interrupt-driven or event-driven programming techniques, where a task can be notified when the event occurs without wasting CPU cycles. This approach is more efficient, saves system resources, and provides faster response times.

Learn more about event  here:

https://brainly.com/question/2532665

#SPJ11