If you collect 82.5 g of carbon dioxide from this reaction (actual yield) what was the percent yield.
1. (10 points) From the Carbonate Lab, if 234 grams of HCI react with 425 grams of Calcium carbonate:
-Write out the balanced equation for this reaction
What is the limiting reagent?
What is the theoretical yield of Carbon dioxide in grams?
-If you collect 82.5 g of carbon dioxide from this reaction ( actual yield) what was the perfect yield.
Answers
The equilibrium equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3)
2HCl + CaCO3 → CaCl2 + CO2 + H2O
Limiting agent To determine the limiting reagent, the number of moles of each reactant must be calculated and compared with the stoichiometric coefficients of the equilibrium equation. Let's start with hydrochloric acid:Moles of HCl = 234 g / 36.46 g/mol = 6.41 mol. Now let's calculate the number of moles of calcium carbonate.Mole CaCO3 = 425 g / 100.09 g/mol = 4.25 molAccording to the equilibrium equation, the stoichiometric ratio of HCl and CaCO3 is 2.1. Therefore, we know that calcium carbonate is the limiting reagent, since he has fewer moles of CaCO3 than HCl and requires twice as many moles of He HCl to fully react with CaCO3. To find the theoretical CO2 yield, we need to use the stoichiometry of the balance equation. It turns out that the stoichiometric ratio of CaCO3 and CO2 is 1.1, so you get 1 mole of CO2 for every 1 mole of CaCO3. Therefore, the theoretical CO2 yield can be calculated asTheoretical yield of CO2 = 4.25 mol x 1 mol CO2/1 mol CaCO3 x 44.01 g/mol = 187.76 gNow you can calculate the CO2 recovery using the following formula:Percent Yield = (Actual Yield / Theoretical Yield) x 100D44 Substituting the given values, we get:Yield = (82.5 g / 187.76 g) x 100% = 43.91 D44 The CO2 recovery is therefore about 43.91%.For more information on percentage yield kindly visit to
https://brainly.com/question/31127824
#SPJ1
Related Questions
In Part A of this Experiment, which direction did the equilibrium shift when water was added? Explain what caused this shift. Keep in mind that water is not included in the K expression. It may be helpful to examine the hydrolysis of the SbCl3 in your lab manual. K is the equilibrium constant Q Is the reaction quotient Equilibrium shifts remains the same; Q=K Equilibrium shifts in the reverse direction; Q K. The equilibrium shifts in the direction with more moles of aqueous products O Equilibrium shifts in the forward direction; Q< K. The equilibrium shifts in the direction with more moles of aqueous products o Equilibrium shifts in the reverse direction; Q > K. The equilibrium shifts in the direction with less moles of aqueous products
Answers
Equilibrium shifts in the forward direction; Q< K. The equilibrium shifts in the direction with more moles of aqueous products.
How do you know the direction of equilibrium shift?The direction of an equilibrium shift can be predicted by applying Le Chatelier's principle, which states that when a system at equilibrium is subjected to a stress, the system will shift in a direction that counteracts the stress.
The direction of an equilibrium shift depends on the nature of the stress and the equilibrium constant of the reaction. The equilibrium constant can be used to determine the relative concentrations of the reactants and products at equilibrium, and can also be used to calculate the equilibrium concentrations of the species at a given set of conditions.
Learn more about reaction equilibrium:https://brainly.com/question/15118952
#SPJ1
What is compact bone made up of?
Answers
A closely packed mineralized matrix, which comprises hydroxyapatite, collagen fibres, and osteocytes as well as trace quantities of other proteins and minerals, makes up the majority of compact bone.
Compact bone is one of the two types of osseous tissue that makes up bones in vertebrates. It forms the outer layer of bone and provides strength and support to the skeleton. The structure of compact bone is composed of a tightly packed mineralized matrix, which is made up of hydroxyapatite crystals and collagen fibers. The hydroxyapatite crystals provide hardness and rigidity to the bone while the collagen fibers give it flexibility and resilience. Osteocytes, or bone cells, are also found in the mineralized matrix, which are responsible for maintaining the bone tissue. Additionally, small amounts of other proteins and minerals are present in the matrix, including calcium, phosphate, and magnesium. Together, these components create a strong and durable structure that is able to support the body's weight and withstand stress and strain.
learn more about compact bone here:
https://brainly.com/question/23923656
#SPJ4
2c2h6 + 7o2 = 4co2 + 6h2o
what mass of co2 will be produced from the reaction of 37. 5 g c2h6
Answers
The mass of CO2 produced from the reaction of 37.5 g of C2H6 is 109.92 g.
The balanced chemical equation for the combustion of ethane (C2H6) with oxygen (O2) is:
2C2H6 + 7O2 → 4CO2 + 6H2O
This equation concludes that 2 moles of C2H6 react with 7 moles of O2 to produce 4 moles of CO2 and 6 moles of H2O.
To find the mass of CO2 produced from the reaction of 37.5 g of C2H6, we need to use stoichiometry. Here are the steps to follow:
Calculate the number of moles of C2H6:
moles of C2H6 = mass of C2H6 / molar mass of C2H6
moles of C2H6 = 37.5 g / 30.07 g/mol
moles of C2H6 = 1.248 mol
Use the mole ratio from the balanced chemical equation to calculate the number of moles of CO2 produced:
moles of CO2 = moles of C2H6 × (4 moles of CO2 / 2 moles of C2H6)
moles of CO2 = 1.248 mol × 2
moles of CO2 = 2.496 mol
Calculate the mass of CO2 produced:
mass of CO2 = moles of CO2 × molar mass of CO2
mass of CO2 = 2.496 mol × 44.01 g/mol
mass of CO2 = 109.92 g
Therefore, the mass of CO2 produced from the reaction of 37.5 g of C2H6 is 109.92 g.
To learn more about stoichiometry:
https://brainly.com/question/28780091
#SPJ4
8 H₂S+_8_Cl₂ --> _16_HCI + _1_Sg8
57 g H₂S makes how many grams of HCL
Answers
Answer:109.5g HCL
Explanation: 1st get the GFM of H2S, which is 34g/mol, and divide 57g by it. You get the moles for H2S: 1.7. Put what you have over what you want (have/want) equal to what other chemical you want like this:
8H2S/1.7H2S = 16HCl/X
Solve for it like an algebra equation
8x = 27.2 27.2/8 = 3.4molHCl
Round to sig figs
3molHCl
Multiple by HCL GFM (36.5g/mol)
3mol x 36.5g/mol
109.5gHCl
Choose the statement that is true at the mid-point, or half-equivalence point, in the titration of a monoprotic weak acid and a strong base. O The moles of strong acid and weak base present in the solution are equal. O The moles of strong base and weak acid present in the solution are equal. O The moles of conjugate base and strong base present in the solution are equal. O The moles of conjugate base and weak acid present in the solution are equal.
Answers
Strong base and conjugate base concentrations in the solution are both equal at moles.
At the mid-point of a titration of a weak acid and a strong base, the pH of the solution is equal to the pKa of the weak acid. This is due to the solution's equal amounts of conjugate base and strong base molecules.As the strong base is added, it reacts with the weak acid to produce the conjugate base and the hydrogen ions (H+) are neutralized. At the mid-point, the moles of conjugate base and strong base present in the solution are equal and so the pH of the solution is equal to the pKa of the weak acid.
learn more about conjugate base Refer:brainly.com/question/30225100
#SPJ1
For an atom, electrostatic potential is also called:
a) electromagnetic potential
b) electron potential c) atomic potential
d) coulomb potential.
Answers
The electrostatic potential for an atom is also called D) coulomb potential.
What is Coulomb's law?Coulomb's law is the law of electric force that states that the force of attraction or repulsion between two charges is directly proportional to their charges and inversely proportional to the square of the distance between them.
The electrostatic potential energy between two charges is also proportional to the product of the charges and inversely proportional to the distance between them squared.
Therefore, for an atom, the electrostatic potential is directly proportional to the charge of the nucleus and inversely proportional to the distance between the electrons and the nucleus.
Thus, the coulomb potential is the electrostatic potential between the positively charged nucleus and negatively charged electrons of an atom. The correct option is d) coulomb potential.
To know more about Coulomb's law:
https://brainly.com/question/506926
#SPJ11
Select an O for organic and an I for inorganic for each compound.
H 2 O: Choose...
C 3 H 6: Choose...
C 22 H 24: Choose...
CH 4: Choose...
NO 2: Choose...
Answers
H2O and CH4 are inorganic substances, whereas C3H6, C22H24, and NO2 are organic substances.
What is compound?Compounds, which are objects, are created when two or more unique elements bond chemically. The components of a compound are held together by chemical bonds, which are created when atoms share or transfer electrons.
Given that it is made up of two covalently bound elements—hydrogen (H) and oxygen (O)—H2O is an inorganic compound.
Because its carbon (C) and hydrogen (H) atoms are covalently bound, the chemical C3H6 is considered to be organic. Propene, a significant ingredient in the manufacture of plastics and synthetic rubber, is an unsaturated hydrocarbon.
C22H24 is an additional chemical substance, specifically a triterpene hydrocarbon. It is a naturally occurring substance that can be found in a variety of plants and is frequently employed in conventional medicine.
Due to the fact that CH4 only has two elements—carbon (C) and hydrogen (H)—covalently bound to one another, it is an inorganic compound. It is generally referred to as methane and is the simplest and most prevalent hydrocarbon.
Due to the presence of two covalently bound elements—nitrogen (N) and oxygen (O)—NO2 is an inorganic molecule. It is a frequently occurring, highly reactive gas in the atmosphere and a significant source of air pollution.
To know more about compound, visit:
https://brainly.com/question/13516179
#SPJ1
What mass of hydrogen will react with 84g of N2
Answers
The balanced chemical equation for this reaction is:
N2 + 3H2 → 2NH3
This means that one mole of N2 reacts with three moles of H2 to produce two moles NH3.
To find out how many moles of N₂ are present in 84 g, we can use its molar mass which is about 28 g/mol.
Number of Moles = Given Mass / Molar Mass
= 84 g /28 g/mol
= 3 mol
From the balanced chemical equation above, we know that it takes three moles of H₂ to react with one mole N₂. Therefore,
1 mol N₂ : 3 mol H₂
Using these ratios, we can calculate the number of moles needed for Hydrogen.
Moles H₁= Ratio * given amount
= (3/1)* Number_of_Moles_Nitrogen
=(3/1)* (3mol)
=9mol
Now that you have calculated how many moles are needed based on stoichiometry calculation, you can now calculate the mass using :
Mass= Number Of Moles * Molar Mass
=9mol* (about) 2g/mol
≈18 g
Therefore, approximately **18 grams** of hydrogen will react with **84 grams**of Nitrogen.
an unknown gas effuses at a rate 0.667 times the rate of co₂. what is the molar mass of the unknown gas?
Answers
An unknown gas effuses at a rate 0.667 times the rate of co₂. The molar mass of the unknown gas is 120 g/mol.
The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass. It's known as Graham's law. Graham's Law explains the rate of effusion of a gas through a small hole into a vacuum. The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass (relative molecular mass). According to the question, the effusion rate of the unknown gas is 0.667 times that of CO₂.
Let the molar mass of the unknown gas be "x".
Therefore, the effusion rate for the unknown gas is proportional to
.[tex]\[\frac{1}{\sqrt{x}}\].[/tex]
The effusion rate of CO₂ is proportional to \[\frac{1}{\sqrt{44}}\].
Now,
[tex]\[\frac{\text{Effusion rate of the unknown gas}}{\text{Effusion rate of CO}_2}=\frac{0.667}{1}\][/tex]
or,
\[tex]\[\frac{1}{\sqrt{x}}=\frac{0.667}{\sqrt{44}}\][/tex]]
or,
[tex]\[\sqrt{x}=\frac{\sqrt{44}}{0.667}\][/tex]
or,
[tex]\[x=\left ( \frac{\sqrt{44}}{0.667} \right )^{2}\][/tex]
Therefore, the molar mass of the unknown gas is 120 g/mol.
For more such questions on molar mass , Visit:
https://brainly.com/question/21334167
#SPJ11
Which of the following foods are complete proteins?a. bread and butterb. animal foods quinoa, or soyc. almonds, peanuts, or cashewsd. potato and sour cream
Answers
in lactic acid fermentation what happens to the pyruvate coming from glycolysis?
Answers
In the process of lactic acid fermentation, the enzyme lactate dehydrogenase catalyses the conversion of pyruvate to lactate or lactic acid by the addition of hydrogen ions.
The pyruvate that results from glycolysis is transformed into lactic acid during lactic acid fermentation. The synthesis of lactate and NAD+ as a result of the transfer of two highly energetic electrons from NADH to pyruvate is what allows for this conversion. This procedure aids in the renewal of NAD+, which is necessary for glycolysis to carry on making ATP without oxygen. In many organisms, including bacteria, fungi, and animals, lactic acid fermentation is an important process. It is crucial in muscles during vigorous exercise when oxygen supply is constrained.
learn more about lactic acid here:
https://brainly.com/question/10948414
#SPJ4
Calcula el volumen en litros que tendran 2 kg de poliestireno expandidos (densidad = 0,92g/cm3)
Answers
2 kg of expanded polyethylene has a volume of 2.17 liters.
Given that,
Density = 0.9g/cm³
Mass = 2kg = 2000g
Density is the substance's mass per unit of volume. Although the Roman letter D may also be used, the sign most frequently used for density is ρ (the lowercase Greek letter rho). A substance's density changes as a function of pressure and temperature. With solids and liquids, this variance is often slight, but for gases, it is much more pronounced.
Density = Mass ÷ Volume
0.92 = 2000 ÷ Volume
Volume = 2000 ÷ 0.92
Volume = 2.17 liters.
Hence, 2 kg of expanded polyethylene has a volume of 2.17 liters.
To learn more about density, refer to:
https://brainly.com/question/26364788
#SPJ4
Your question is in Spanish. The English translation of the question is:
Calculate the volume of 2 kg of expanded polyethylene in liters. ( Density = 0.92g/cm³ )
Chemistry Assertion and Reasoning
B) Assertion and Reasoning Direction: in the following questions, a statement followed by a statement of reason (R).
Mark the correct choice as:
(A) Both Assertion (a) And Reason (R) Are true and Reason (R) Is thd correct explanation of assertion (A)
(B) Both Assertion (A) And reason ( R) Are true but Reason (R) Is not correct explanation of assertion (A)
(C) Assertion (A) is true but reason ( R) is false
(D) Assertion (A) is false but reason (R) is true
Assertion: Calcium And Argon are isobars
Reason: Calcium And Argon Have Same Mass Numbers
Assertion: the number of valence electrons in oxygen atoms is 6
Reason: the valency of Oxygen atom is 6
Assertion: most of the Alpha Particles in Rutherfords experiment passed straight through gold foil
Reason: The Centre Of The Atom Is Positively Charged
Answer ASAP PLEASE!
Answers
1. Calcium and Argon are isobars , the correct answer is (A). 2. number of valence electrons in oxygen atoms is 6, the correct answer is (B) 3. most of the alpha particles deflected, the correct answer is (D).
Describe Protons?Protons are subatomic particles that are found in the nucleus of an atom. They have a positive electrical charge, which is equal and opposite to the negative charge of electrons, the other subatomic particle found in atoms. The number of protons in the nucleus of an atom determines what element the atom is.
The mass of a proton is approximately 1 atomic mass unit (amu), which is about 1.673 x 10⁻²⁷ kg. This is slightly less than the mass of a neutron, which is another subatomic particle found in the nucleus of an atom.
1. The correct answer is (A) Both Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
The statement in Assertion is true that Calcium and Argon are isobars because they have the same mass number (40). Isobars are atoms of different elements that have the same mass number but different atomic numbers.
The statement in Reason is also true and provides the explanation for Assertion because the mass number of an atom is equal to the sum of the number of protons and neutrons in its nucleus. Calcium has 20 protons and 20 neutrons, giving it a mass number of 40. Argon has 18 protons and 22 neutrons, also giving it a mass number of 40. Therefore, they have the same number of nucleons and are isobars.
Therefore, option (A) is the correct answer.
2. The correct answer is (B) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
The statement in Assertion is true that the number of valence electrons in oxygen atoms is 6. Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions.
The statement in Reason is also true, but it does not provide the correct explanation for Assertion. Valency refers to the combining capacity of an atom, and it is determined by the number of valence electrons. The valency of oxygen is 2, not 6. Oxygen has 6 valence electrons, but it forms two covalent bonds to complete its octet in most compounds, giving it a valency of 2.
Therefore, option (B) is the correct answer.
3. The correct answer is (D) Assertion (A) is false but reason (R) is true.
The statement in Assertion is false because most of the alpha particles in Rutherford's experiment were deflected at various angles, and only a few passed straight through the gold foil. This observation led Rutherford to propose the nuclear model of the atom.
The statement in Reason is true. The center of the atom, or nucleus, is positively charged because it contains protons, which have a positive charge. Electrons, which have a negative charge, orbit the nucleus in a cloud-like distribution.
Therefore, option (D) is the correct answer.
To know more about atom visit:
https://brainly.com/question/30282087
#SPJ1
Below you will see the election transmission of hydrogen atoms which of do you think represents the low frequency protons emissions.
Answers
The highest frequency of the lines that we have in the hydrogen atom will be line D
Is frequency inversely related to wavelength?Frequency is inversely related to wavelength. The wavelength and frequency of a wave are related by the equation:
c = λf
where c is the speed of light, λ (lambda) is the wavelength of the wave, and f is the frequency of the wave. This equation is known as the wave equation.
If the wavelength of a wave increases, then the frequency of the wave must decrease to maintain the same speed. Conversely, if the wavelength of a wave decreases
Learn more about wavelength:https://brainly.com/question/31143857
#SPJ1
Each tablet contains the same number of moles of CaCO 3 and MgCO 3. One tablet reacted with excess hydrochloric acid to produce 0.24 dm 3 of carbon dioxide at r.t.p.
1.Calculate how many moles of CaCO 3 there are in one tablet?
2.number of moles CO 2 = ?
can anyone please give me explained answer.
Answers
The number of moles of CaCO3 and number of moles of CO2 produced by one tablet is 0.00974 mol.
What is the number of moles of CaCO 3 there are in one tablet?Based on the given information, we can use stoichiometry to calculate the number of moles of CaCO3 in one tablet and the number of moles of CO2 produced.
To calculate the number of moles of CaCO3 in one tablet, we need to know the balanced chemical equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3):
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
From the equation, we can see that 1 mole of CaCO3 produces 1 mole of CO2.
Therefore, the number of moles of CaCO3 in one tablet is equal to the number of moles of CO2 produced by the tablet.
The given information states that one tablet reacted with excess hydrochloric acid to produce 0.24 dm3 of carbon dioxide at r.t.p. We can convert the volume of CO2 to moles using the ideal gas law:
PV = nRT
where;
P is the pressure (which is 1 atm at r.t.p.),
V is the volume (0.24 dm3),
n is the number of moles of gas,
R is the gas constant, and
T is the temperature (which is 273 K at r.t.p.).
Rearranging the equation and solving for n, we get:
n = PV/RT = (1 atm)(0.24 dm3)/(0.08206 L·atm/mol·K)(273 K)
n = 0.00974 mol
Learn more about number of moles at: https://brainly.com/question/30337257
#SPJ1
Which of the following bonds would be the most polar without being considered ionic?a. F-Hb. Na-Fc. S-Hd. Cl-He. O-H
Answers
The most polar bond without being considered ionic would be O-H.
Ionic bonds are the bond formed by the sharing of electrons between nonmetals to create a molecule that is neutral, while a covalent bond is a bond formed by the sharing of electrons between metals and nonmetals to create a molecule that is neutral.
Polar covalent bonds happen when there is an uneven distribution of electrons between two atoms that are bonded together. This is usually because the electrons are more strongly attracted to one atom over the other.
As a result, one atom will have a partial negative charge, and the other atom will have a partial positive charge.
In the water molecule, the O-H bond is polar because oxygen is more electronegative than hydrogen. Since the difference in electronegativity between hydrogen and oxygen is more significant than between the other atoms in the other bonds, the O-H bond is the most polar.
Learn more about polar bonds here:
https://brainly.com/question/29144393
#SPJ11
three metals, a, b and c, of equal mass, have heat capacities of 0.3 j/goc, 0.4 j/goc, and 0.5 j/goc, respectively. which of these metals will have the largest increase in temperature if the same amount of heat is added to the each of their systems?
Answers
The metal that will respond to the added temperature by increasing is metal A because it has the lowest heat capacity.
How to determine increase in temperature?The metal with the smallest heat capacity will have the largest increase in temperature if the same amount of heat is added to each of their systems. This is because metals with smaller heat capacities require less heat energy to increase their temperature compared to those with larger heat capacities.
Therefore, metal A with the heat capacity of 0.3 J/g°C will have the largest increase in temperature if the same amount of heat is added to each of their systems, followed by metal B with 0.4 J/g°C and metal C with 0.5 J/g°C.
Learn more on temperature increase here: https://brainly.com/question/26866637
#SPJ1
Identify and check the number of stereoisomers expected for each of the following: A. option. B. option. C. option. D. option.
Answers
X = 2n, where n is the number οf stereο genic atοms in the mοIecuIe, is the fοrmuIa fοr determining the maximum number οf stereοisοmers.
Hοw many stereοisοmers are pοssibIe fοr ?`The fοrmuIa X = 2n cοnsistentIy deIivers the maximum number οf stereοisοmers, but it faiIs tο prοduce the true number in circumstances with great symmetry. If a mοIecuIe cοntains twο stereοcenters, it shοuId have fοur stereοisοmers. If a mοIecuIe cοntains three stereοcenters, it shοuId have nο mοre than eight stereοisοmers.
Thus, fοr a given cοmpοsitiοn, the maximum number οf stereοisοmers is 2n, where n is the number οf chiraI centers. Therefοre there are fοur structuraI isοmers and fοur stereοisοmers. As a resuIt, οptiοn 'D' is the right answer. Chain isοmerism is a sοrt οf structuraI isοmerism in which the cοmpοnents οf these isοmers are branched in distinct ways.
Learn more about stereoisomers, visit:
brainly.com/question/16986110
#SPJ1
In which way the Chain isomerism is a sort of structural isomerisam andd what are the components of these isomers ?
Explain the following observations:a) HCl is a stronger acid than H2Sb) H3PO4 is a stronger acid than H3AsO4c) HBrO3 is a stronger acid than HBrO2d) H2C2O4 is a stronger acid than HC2O−4e) benzoic acid, C6H5COOH, is a stronger acid than phenol, C6H5OH
Answers
a) HCl is a stronger acid than H2S due to weak bond between hydrogen and sulfur.
b) H3PO4 is a stronger acid than H3AsO4 due to smaller size of phosphorous atom than the arsenic atom.
c) HBrO3 is a stronger acid than HBrO2 as the oxidation state of Br in HBrO3 is +5.
d) H2C2O4 is a stronger acid than HC2O−4 as HC2O−4 is a conjugate base of H2C2O4.
e) Benzoic acid, C6H5COOH, is a stronger acid than phenol, C6H5OH due to strong resonance structure.
The following observations can be explained as follows:
a) HCl is a stronger acid than H2SIn hydrogen sulfide (H2S). The bond between hydrogen and sulfur is relatively weak. As a result, this bond is more difficult to break than that between hydrogen and chlorine in hydrogen chloride (HCl). Therefore, HCl is a stronger acid than H2S.
b) H3PO4 is a stronger acid than H3AsO4. The phosphorous atom has a smaller size than the arsenic atom. As a result, the P–O bond is more stable than the As–O bond. This makes the H3PO4 a stronger acid than H3AsO4.
c) HBrO3 is a stronger acid than HBrO2. HBrO3 is a stronger acid than HBrO2 since the oxidation state of Br in HBrO3 is +5. In contrast, Br has an oxidation state of +3 in HBrO2. As a result, the bond between Br and oxygen in HBrO3 is weaker, resulting in a higher acidity than in HBrO2.
d) H2C2O4 is a stronger acid than HC2O−4. HC2O−4 is a conjugate base of H2C2O4. The conjugate base is less acidic than the original acid, according to the conjugate acid-base theory. As a result, H2C2O4 is a stronger acid than HC2O−4.
e) Benzoic acid, C6H5COOH, is a stronger acid than phenol, C6H5OH. Benzene ring has a strong resonance structure due to the presence of electron donating OH- group in phenol. Resonance delocalizes the negative charge formed by the loss of a proton, and it makes it less acidic. The absence of an electron-donating group in benzoic acid allows for more hydrogen ion dissociation, making it a stronger acid than phenol.
Learn more about Acid:
https://brainly.com/question/28362783
#SPJ11
what do carbon dioxide and methane do for our atmosphere?
Answers
Methane and carbon dioxide are both greenhouse gases that are crucial in controlling the temperature of Earth's atmosphere.
Both natural processes like respiration and volcanic eruptions, as well as human activity like burning fossil fuels, emit carbon dioxide (CO2) into the atmosphere. It aids in keeping the planet warm enough to support life by retaining heat in the atmosphere. Carbon dioxide levels that are too high, however, can exacerbate climate change and global warming.
Methane (CH4) is another greenhouse gas that is emitted into the atmosphere as a result of human activity such as cattle husbandry and natural gas production as well as natural processes such as decomposition. Even though it decomposes more quickly in the atmosphere than carbon dioxide, it is even more efficient at trapping heat.
Learn more about Methane here:
https://brainly.com/question/2127750
#SPJ4
Given the following chemical symbol, answer the questions below. This atom has 70 electrons and 114 neutrons. What value should be?Y 76 X^Z
Answers
The value of Z for the chemical symbol Y76XZ given that the atom has 70 electrons and 114 neutrons is 70.
The number of protons in the nucleus of an atom is equal to its atomic number(Z). Therefore, to calculate the value of Z, you need to subtract the number of neutrons from the mass number (A).
The number of neutrons is calculated as follows:
Number of neutrons = mass number - atomic number
The mass number(A) is calculated as follows: Number of protons + number of neutrons = mass number.
The total number of electrons is given as 70.
So, number of electrons = number of protons.
Each atom is neutral, so the total positive charge (protons) is equal to the total negative charge (electrons).
Therefore, the number of protons is also equal to 70.
The mass number (A) is the sum of the number of protons and the number of neutrons:
mass number = number of protons + number of neutrons.
Substituting the known values into the above equation:
A = 70 + 114 = 184
Therefore, to calculate the atomic number (Z), you need to subtract the number of neutrons from the mass number:
Z = A - number of neutrons
Z = 184 - 114
Z = 70
Therefore, the value of Z for the chemical symbol Y76XZ given that the atom has 70 electrons and 114 neutrons is 70, and the mass number is 184.
Learn more about chemical symbol: https://brainly.com/question/10892900
#SPJ11
Eight moles of glucose have been oxidized under aerobic conditions. How many total moles of CO2 were produced? Enter a number below.
Answers
48 moles of CO2 were produced from 8 moles of glucose under aerobic conditions.
Eight moles of glucose have been oxidized under aerobic conditions, and we need to find the total moles of CO2 produced.
For this purpose, we will utilize the balanced chemical equation for the complete combustion of glucose.
The balanced equation is given as below: C6H12O6 + 6O2 → 6CO2 + 6H2O
From the above equation, we can see that one mole of glucose produces six moles of carbon dioxide.
Therefore, eight moles of glucose will produce 8 × 6 = 48 moles of carbon dioxide.
So, the total moles of CO2 produced are 48.
Learn more about glucose: brainly.com/question/397060
#SPJ11
4. A sample of water with a mass of 785 g and a starting temperature of
15.0°C is heated. What would the final temperature of the water be if 250,000
joules of heat are added to the water?(Ans: 91°C)
Answers
The final temperature of the water would be approximately 91°C after 250,000 joules of heat are added.
Describe Heat Capacity?Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a measure of how much energy a substance can absorb without a significant change in its temperature.
The heat capacity of a substance depends on its mass and composition. Substances with more mass or more complex molecular structures generally have higher heat capacities, meaning they require more energy to increase their temperature than substances with less mass or simpler molecular structures.
To solve this problem, we can use the specific heat capacity formula:
Q = m * c * ΔT
where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
We can rearrange this formula to solve for ΔT:
ΔT = Q / (m * c)
We are given the mass of the water (m = 785 g), the amount of heat added (Q = 250,000 J), and the specific heat capacity of water (c = 4.184 J/g°C).
Substituting these values into the equation, we get:
ΔT = 250,000 J / (785 g * 4.184 J/g°C)
ΔT ≈ 75.4°C
Therefore, the final temperature of the water would be:
15.0°C + 75.4°C = 91 °C
So the final temperature of the water would be approximately 91 °C after 250,000 joules of heat are added.
To know more about capacity visit:
https://brainly.com/question/28921175
#SPJ1
Consider the following compound: 8 N 5 2. 3. 4. Determine the oxidation number atoms (a) 1. (b) 6, and (c) 7, a.) b.) c.) What is the average oxidation number for carbon in this compound? Use the algorithm method with the formula, not the structure. Enter fractions in decimal form with at least 3 spaces after the decimal. e.g. if O.N. E. then enter 2.500. Evaluate
Answers
The oxidation number of atoms (a) 1. (b) 6, and (c) 7 are as follows:The oxidation number of atom 1 is +8,The oxidation number of atom 6 is +5,The oxidation number of atom 7 is -2.The average oxidation number for carbon in this compound is -1.875.
The algorithm method with the formula is used to determine the average oxidation number for carbon in the compound. The formula to calculate the oxidation state of carbon can be given as:
Oxidation state of carbon = (number of carbon atoms x oxidation state of carbon) / total number of atoms.The given compound 8 N 5 2.3.4 consists of 19 atoms, of which 8 are carbon atoms, 5 are nitrogen atoms, and 6 are hydrogen atoms.
The oxidation state of nitrogen is -3 in the compound, and the oxidation state of hydrogen is +1.Now, the oxidation state of carbon is calculated as follows:
Oxidation state of carbon = (8 × oxidation state of carbon) / 19
We are supposed to find the average oxidation number of carbon atoms. To do this, we sum up the oxidation numbers of all carbon atoms and divide the sum by the total number of carbon atoms.
Oxidation state of carbon = (5* -1 + 3* -2 + 6 * +1) / 8
Oxidation state of carbon = (-5 - 6 + 6) / 8
Oxidation state of carbon = -1.875
Thus, the average oxidation number for carbon in this compound is -1.875.
Learn more about oxidation number here:
brainly.com/question/29263066
#SPJ11
What element is located in group 4 and period 4?*
Answers
rank the following alkyl halides in order of their increasing rate of reaction with triethylamine: iodoethane 1-bromopropane 2-bromopropane
Answers
The order of increasing reaction rate of alkyl halides with triethylamine is iodoethane, 1-bromopropane, and 2-bromopropane.
When the primary alkyl halide reacts with the triethylamine, it's faster than the secondary alkyl halide. Since triethylamine is a strong, bulky base that tends to perform nucleophilic substitution, it undergoes a reaction with both primary and secondary alkyl halides. When halides react with triethylamine, the bond between nitrogen and carbon is formed.
In this reaction, the rate of reaction will be slower with secondary alkyl halides due to steric hindrance. Iodoethane will be more reactive than 1-bromopropane because of the higher electronegativity of iodine which makes it more prone to nucleophilic substitution. Based on the above discussion, the order of increasing rate of reaction with triethylamine is 2-bromopropane < 1-bromopropane < iodoethane.
Therefore, iodoethane is the most reactive of the three alkyl halides, 1-bromopropane is more reactive than 2-bromopropane and 2-bromopropane is the least reactive.
To know more about alkyl halides, refer here:
https://brainly.com/question/17063582#
#SPJ11
a solution of cacl2 in water forms a mixture that is 35.0% calcium chloride by mass. if the total mass of the mixture is 481.6 g, what masses of cacl2 and water were used?
Answers
The mass of CaCl2 and water that were used are 168.56g and 313.04g, respectively.
The total mass of the mixture is 481.6g, and it is found that the solution of CaCl2 in water forms a mixture that is 35.0% calcium chloride by mass. Therefore, we are supposed to find the masses of CaCl2 and water that were used.
In the given mixture, let's assume the mass of CaCl2 is ‘x’ g, and the mass of water is ‘y’ g.
Now, from the question, it is given that the total mass of the mixture is 481.6 g:
x + y = 481.6 g
1. As per the question, it is also given that the mixture is 35.0% calcium chloride by mass. This means that the ratio of the mass of CaCl2 to the total mass of the mixture is 35/100 or 0.35. So, the mass of CaCl2 present in the mixture is:
Mass of CaCl2 = 0.35 × 481.6 g = 168.56 g
Also, the mass of water in the mixture is the difference between the total mass of the mixture and the mass of CaCl2.
Thus, mass of water = total mass of the mixture - mass of CaCl2y = 481.6 g - 168.56 g = 313.04 gThus, the mass of CaCl2 and water that were used are 168.56g and 313.04g, respectively.
Learn more about mass: https://brainly.com/question/25959744
#SPJ11
Devise a 6-step synthesis of a carboxylic acid from ethyne using the reagents provided. 1. reagent 1 4. reagent 4 2. reagent 2 5. reagent 5 3. reagent 3 6. reagent 6 H-CEC-H OH Reagent 1 is: Reagent 2 is: Reagent 3 is: Reagent 4 is: Reagent 5 is: Reagent 6 is:
Answers
6-step synthesis of a carboxylic acid.
Reagent 1 forming a vinyl chloride, Reagent 2 forming an acyl chloride, Reagent 3 forming a carbonyl chloride, Reagent 4 forming a carboxylic acid, Reagent 5 forming a carboxylate anion and Reagent 6 forming the desired carboxylic acidThis question requires a 6-step synthesis of a carboxylic acid from ethyne using the reagents provided. Here is the solution:
Reagent 1 (HCl) is added to ethyne (H-CEC-H), forming a vinyl chloride.Reagent 2 (Hg(OAc)2) is then added to the vinyl chloride, forming an acyl chloride.Reagent 3 (H2O2) is then added to the acyl chloride, forming a carbonyl chloride.Reagent 4 (K2Cr2O7) is then added to the carbonyl chloride, forming a carboxylic acid.Reagent 5 (NaOH) is then added to the carboxylic acid, forming a carboxylate anion.Finally, Reagent 6 (H2SO4) is added to the carboxylate anion, forming the desired carboxylic acid (OH).Learn more about reaction mechanism: brainly.com/question/26723105
#SPJ11
Which of the following is the source of electrons for the light reactions?
a. C6H12O6 b. CO2 c. NADPH d. H2O
Answers
Answer: d. H2O
Explanation: Electrons for the light reactions are found in water. These electrons are taken by a certain enzyme complex known as the water splitting complex
Did the control experiment verify or refute the results from exercise 1? use your results from exercises 1 and 2 to validate your answer.
Experiment 1 E Data Table 1 B Data Table 2 Data Table 1: Antacid Neutralization Data Mass of 0. 59 Crushed Antacid (9) Concentration 1. 0 of HCI (M) Volume HCI 5. 0 (mL) Concentration 1. 0 of NaOH (M) Initial NaOH 9. 4 mL Volume (mL) Final NaOH 8. 2 mL Volume (mL) Total Volume 1. 2 mL of NaOH Used (mL) Experiment 1 Data Table 1 Data Table 2 Data Table 2: Experimental Results I 0. 1825 g 0. 0012 HCl available for neutralization (g): Moles of NaOH required to reach stoichiometric point (mol): HCI neutralized by antacid (g): НСІ neutralized per gram of antacid (9) 0. 1387 0. 2774 Experiment 2 El Data Table 3 B Data Table 4 Data Table 3: Control Experiment Data Concentration 1. 0 of HCI (M) Volume HCI 5. 0 (mL) Concentration 1. 0 of NaOH (M) Initial NaOH 9. 2 mL Volume (mL) Final NaOH 3. 6 mL Volume (mL) Total Volume 5. 6 mL of NaOH Used (mL) Data Table 4: Control Experiment Results 0. 2049 Moles of 0. 0056mol NaOH needed to neutralize 5. 0 mL of 1. OM HCI (mol): Grams of HCI neutralized (g): NaOH 4. 4mL volume difference between back titration and control (ml): Grams of 0. 160g HCI neutralized by NaOH volume difference (9)
Answers
Volume difference between back titration and controlHCI neutralized by NaOH volume difference is 0.0056 moles.
Given,
* Mass of Antacid = 0.5g
* [HCl] = 1M
* [tex]V_{HCl}[/tex] = 5 ml (pipetted out)
* [NaOH] = 1M
* [tex]V_{NaOH}[/tex] - 1.2 ml (consumed)
* Amt. of HCl avaliable for neutralisation = 0.1825 g
* No. of moles of NaOH req. to reach eq. point = 0.0012
* Amt. of HCl neutralised by antalid = 0.1387 g
* Amt. of HCl neutralised by antalid = 0.1387 g
* Amt. of HCl neutralised per gram of antalid = 0.1387 g
Solution: [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{HCl}[/tex] = [tex]([/tex][tex]N[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]
(1 x 5 ) = [tex]([/tex][tex]1[/tex] × [tex]V[/tex][tex])_{NaOH}[/tex]
= [tex]V(NaOH)[/tex] = ( 1 x 5) / 1 = 5ml
In control expt. data [tex]V(NaOH)[/tex] = 5.6ml
But in given data, [tex]V(NaOH)[/tex] = 1.2ml
So, Volume diff. of NaOH between back titration and control = 5.6 - 1.2 = 4.4ml
So, given follows
So, 4.4 ml of HCl means,
its Conc. will be equal to, 4.4 x 36.5 / 1000 = 0.1606 g
This is correct in control expt. results
In control expt. data, [tex]V(NaOH)[/tex] = 5.6ml
This corresponds to 5.6 x 40 / 1000 = 0.224g
This correspond to 0.224 / 40 = 0.0056 moles
This is correct in control expt. results.
Titration is a laboratory technique used to determine the concentration of an unknown solution by reacting it with a known solution. It is a quantitative method used to determine the amount of a substance in a sample. Titration is often used in chemistry to determine the concentration of acids, bases, and salts.
In a titration, a measured amount of the unknown solution is slowly added to a known solution of a substance with a known concentration called the titrant. The titrant is added until the reaction is complete, and a color change or other observable change occurs. The point at which the reaction is complete is known as the endpoint, and it is usually determined using an indicator, which changes color when the reaction is complete.
To learn more about Titration visit here:
brainly.com/question/2728613
#SPJ4