The balanced chemical equation for the oxidation of borneol to camphor using sodium dichromate in acid is:
[tex]2C_1_0H_1_8O+16H^+10Cr_2O_7^2^- - > 2C_1_0H_1_6O+10Cr^+^3+8H_2O+16H^+[/tex]
To calculate the amount of sodium dichromate (Na2Cr2O7 * 2H2O) needed to oxidize 0.50 g of borneol, you can use the mole ratio of reactants. The balanced equation tells us that for every 1 mole of borneol, 10 moles of sodium dichromate are needed.
The molar mass of borneol is 154 g/mol, so 0.50 g is equal to 0.50/154 moles. To find the amount of sodium dichromate needed, multiply this mole amount by 10, then convert it to grams by multiplying by the molar mass of Na2Cr2O7 * 2H2O (298 g/mol).
To know more about chemical equation click on the link below:
https://brainly.com/question/30087623#
#SPJ11
whether an allele is dominant or recessive depends on
The specifics of the proteins for which an allele codes determine whether it is dominant or recessive. The words might also be subjective, adding to the ambiguity.
Depending on how you look at it, the same allele might be either dominant or recessive. The sickle-cell allele, which is discussed further below, is a prime example.
The key aspect to remember is that there is no common mechanism by which dominant and recessive alleles function. Recessive alleles are not physically "dominant" or "repressed" by dominant alleles.
Dominant and recessive inheritance are helpful ideas for forecasting the likelihood of an individual getting specific characteristics, particularly genetic illnesses.
Learn more about allele is dominant
https://brainly.com/question/29369426
#SPJ4
WHOEVER ANSWERS FIRST GETS THE BRAINLIST
Answer:
A
Explanation:
Hope this helps
Answer:
To transport water and food.
Explanation:
Write a 3-5 sentence summary explaining how a signal travels down a neuron, using the following terms: Action potential, neuron, Resting potential, Na+, Threshold, Repolarization, K+, Myelin Sheath, Hyperpolarization, Gated Channel, and Depolarization
The signal travels by depolarization and repolarization.
How does a signal travels down a neuron?A signal, also known as an action potential, travels down a neuron by the process of depolarization and repolarization. When an electrical signal reaches the axon hillock, it triggers the opening of ion channels, which causes an influx of positively charged ions into the cell.
This influx leads to a local depolarization, which then triggers more ion channels to open and continue the depolarization along the length of the axon.
At the same time, potassium ion channels open, allowing potassium ions to exit the cell, causing repolarization. This cycle of depolarization and repolarization propagates the signal down the axon until it reaches the axon terminal, where it triggers the release of neurotransmitters, transmitting the signal to the next neuron or effector cell.
Learn more about neuron:https://brainly.com/question/29462317
#SPJ1
the retrosynthetic arrow in the following scheme describes a reaction that would use which of the reagents below? br2, hυ etona kotbu hbr, roor hbr
The arrow of retrosynthesis. Indicates that the species on the left is a descendant of the species on the right.
Arrow of bond dipole. The arrow head is pointing to the more electronegative atom (the - atom), while the crossed end is above the more electropositive atom (the + atom).
This is a retrosynthetic arrow, which means that the species before the arrow (which is typically more complicated) is synthesized from the species after the arrow (normally less complicated).
One or more steps can be used to create the target molecule.
We use this type of arrow to plan forward syntheses of more complex molecules by strategically detaching the more complex molecule.
Example showing Retrosynthetic approach:
Learn more about reagents here
https://brainly.com/question/24280757
#SPJ4
give the systematic name for the following formula: [cr(en)3](clo4)3.
Typically, coordination complexes consist of a central atom and one or more ligands. Coordination complexes are oxidized according to the same criteria as atomic, molecular, and ionic species in a generic formula.
With an example, what is coordination complex?A coordination entity is a chemical complex with a core ion or atom that is linked to a certain number of other atoms, molecules, or ions. [CoCl3(NH3)3] and [Fe(CN)6]4- are a few of instances of these coordination entities.
What does the phrase coordination complicated mean?The end result of a Lewis acid-base reaction, in which neutral molecules or anions (referred to as ligands) form coordinate covalent bonds with a central metal atom (or ion), is a coordination complex. Ligands are Lewis bases because they have at least one set of electrons that they can give to a metal atom or ion.
To learn more about coordination complexes here:
https://brainly.com/question/11087982
#SPJ4
What products will result when HClO is added to water?
When HClO is added to water, hydrochloric acid (HCl) and hypochlorous acid (HClO) will be produced.
What is hydrochloric acid ?
Hydrochloric acid is a clear, strong, corrosive, and highly acidic solution of hydrogen chloride gas (HCl) in water. It is an important component of gastric acid and is used in industrial settings for various processes such as metal cleaning, etching, and dyeing. It is also found in household cleaning products.
To learn more about what is hydrochloric acid ?
Here: https://brainly.com/question/15123964
#SPJ4
why calorimetry lab high percentage error
Several reasons can contribute to a high percentage inaccuracy in a calorimetry lab. Among the most prevalent reasons are:
Inadequate stirring: The heat transmission between the reaction mixture and the calorimeter is not homogeneous and constant, resulting in temperature change measurement inaccuracies.
Temperature measurement that is inaccurate: The temperature measuring instruments employed, such as thermometers or temperature probes, may have a high degree of measurement error or are not correctly calibrated.
Heat loss to the environment: If the calorimeter is not well-insulated, heat may be lost to the environment, resulting in mistakes in temperature change measurement.
Incomplete reaction: The heat of reaction may not be reliably evaluated if the reaction is not completed.
What is calorimetry?Calorimetry is the study or act of measuring changes in state variables of a body with the goal of determining the heat transfer associated with changes in its state caused by chemical reactions, physical changes, or phase transitions under defined limits in chemistry and thermodynamics. Calorimetry is the measurement of the quantity of heat transmitted to or from a material. To do this, heat is exchanged with a calibrated item (calorimeter). The quantity of heat transmitted by the process under investigation is calculated using the temperature change observed by the calorimeter.
To know more about calorimetry,
https://brainly.com/question/1407669
#SPJ4
if the rate law for a chemical reaction is: rate = k(a). what are the units of the rate constant k?
Unit of rate constant (k) = L mol -1 s.
What is the rate constant?
The rate constant can be calculated for elementary reactions using molecular dynamics simulations. One possible approach is to calculate the mean residence time of the molecule in the reactant state. Although feasible for small systems with short residence times, this approach is not widely applicable because reactions are often rare events at the molecular scale.To know more about rate constant, click the link given below:
https://brainly.com/question/20305871
#SPJ4
The units of the rate constant k depend on the units of the variable a. If the units of a are moles per liter, then the units of k would be liters per mole-time. If the units of a are moles per gram, then the units of k would be grams per mole-time.
What is variable?A variable is a symbolic name used to represent a value or set of values in a program. It is a way for a programmer to store data that can be used throughout the program. Variables can be used to store information such as numbers, strings, objects, and more. Variables can also be used to store user input, and they can be used to store the results of calculations and operations. Variables are essential for programmers to write efficient and effective code.
To learn more about variable
https://brainly.com/question/28433016
#SPJ4
How many grams of KMnO4 would you need to make 1 L of a 2M solution? (Formula weight of 158.04 g/mol.)
According to the given statement, 1 L of a 2M solution would require 316.08 grammes of KMnO4.
What is KMnO4 used for?Additionally known uses for KMnO4 include printing on textiles and tanning leather. Even as a cleaning solution, insecticide, and antiseptic, this substance has many uses.
They are using the molar mass - KMnO4, which would be 158.04 grammes per mole, to compute this.
In order to create the solution, we should therefore need to mix 1800 ml of water with 316.08 grammes of KMnO4.
Once the KMnO4 has been dissolved, the solution's volume should be increased to a maximum if 2000 ml (2.0 L).
To know more about KMnO4 visit:
brainly.com/question/24102889
#SPJ4
a 0.50 mole sample of co2g at 2.0 atm occupies 11.2 liters
The temperature of the sample is 3527.8 K, or approximately 3254.6°C.
What is ideal gas law?Ideal gas law is the equation of state of hypothetical ideal gas.
As, PV = n RT, where P is pressure, V is volume, n is number of moles, R is the ideal gas constant (8.31 J/mol*K), and T is temperature in Kelvin.
2 atm * 11.2 L = 0.50 mol * 8.31 J/mol*K * T
Converting atm to pascals:
2 atm * 101325 Pa/atm = 202650 Pa
202650 Pa * 11.2 L = 0.50 mol * 8.31 J/mol*K * T
T = (202650 * 11.2) / (0.50 * 8.31)
T = 3527.8 K or 3254.6°C.
Therefore, the temperature of the sample is 3527.8 K, or approximately 3254.6°C.
To know more about ideal gas law, refer
https://brainly.com/question/27870704
#SPJ1
Note: The question given on the portal is incomplete. Here is the complete question.
Question: A 0.50 mole sample of CO2(g) at 2 atm occupies 11.2 liters. What is the temperature of the sample?
how does the rate of disappearance of methane relate to the rate of reaction?
The rate of disappearance of methane is directly proportional to the rate of the reaction.
The rate of a chemical reaction is a measure of how quickly the reactants are consumed and the products are produced. In the case of methane, the rate of its disappearance can provide important information about the reaction that is occurring.
If the rate of disappearance of methane is directly proportional to the rate of the reaction, this means that as the rate of the reaction increases, the rate at which methane is consumed will also increase. Conversely, if the rate of the reaction decreases, the rate of methane disappearance will decrease as well.
To know more about methane, click here.
https://brainly.com/question/13719781
#SPJ4
Arrange the following in order of decreasing temperature.
1- 273K
2-133 degrees F
3- 351 K
4- 25 degree C
5- 95 degree F
6- 58 degree F
7- 146 degree C
273 K
133 degrees F = 329 K
351 K
25 degree C = 298 K
95 degree F = 308 K
58 degree F = 287 K
146 degree C = 419 K
419 K > 351 K > 329 K > 308 K > 298 K > 287 K > 273 K
What is temperature ?The concept of temperature is used to convey quantitatively how hot and cold something is. Using a thermometer, one can gauge temperature. Thermometers are calibrated using different temperature scales that traditionally relied on different reference points and thermometric materials for definition.
Temperature is measured in Celsius (°C), Kelvin (K), Fahrenheit (°F), or Rankine and refers to the average molecular kinetic energy within a substance or system (R). It is a quantifiable physical attribute of an object, also referred to as a state variable.
Learn more about Temperature here:
https://brainly.com/question/25677592
#SPJ4
PLEASE ANSWER NOW!!!!!
The experimental design that have been shown is the effect of gravity on plant growth. Option D
What is experimental design?Experimental design refers to the systematic and organized approach to designing an experiment, with the aim of isolating and manipulating independent variables in order to observe the effect on a dependent variable. The goal is to establish causality, control extraneous factors, and increase the validity and reliability of the results.
It involves identifying research question, forming hypotheses, selecting participants, assigning treatments or interventions, controlling extraneous variables, and determining appropriate methods of data analysis.
Learn more about experimental design:https://brainly.com/question/30055326
#SPJ1
12
John Graham was charged in the bombing of United Airlines Flight 629 on November 1, 1955. What ultimately happened to him?
A.
B.
C.
D.
He died on the plane when it exploded.
He was found not guilty by reason of insanity.
He was convicted of murder and executed.
He escaped prison and was never captured.
Answer:C. He was convicted of murder and executed.
brianliest?
Explanation:
C. He was convicted of murder and executed.
in phase two, the reduction stage, what molecule will donate electrons, and therefore is the source of the reducing power?
The 1,3-bisphosphoglycerate, a low-energy acid, will accept electrons from NADPH during phase two's reduction cycle to create the three-carbon sugar G3P.
The second stage of photosynthesis uses the molecules ATP and NADPH, which are temporarily transferred the energy to. A variety of proteins and pigment compounds make up Photosystem II's reaction hub. A particular pair of chlorophyll molecules called p680, which donates an electron to the electron transport system, is at the centre of the reaction centre. The chloroplasts' thylakoid membranes are where the light reactions take place. Water splits during the light processes, acting as a source of electrons and H+ ions (protons).
To know more about reduction cycle click here:
brainly.com/question/14487113
#SPJ4
What is the Lewis structure for HNO3?
The Lewis structure for HNO3 is mentioned below.
What is lewis strucure?
Diagrams that show the chemical bonds between the atoms of a molecule are known as Lewis dot structures, also known as electron dot structures. Additionally, they show the total number of lone pairs found in each of the atoms that make up the molecule. Gilbert N. Lewis introduced the Lewis structure in his 1916 article The Atom and the Molecule, and it bears his name.
What is electron ?
It is possible for an atom to have an attached or detached electron, a negatively charged subatomic particle (not bound). The electron, along with protons and neutrons, is one of the three main particle types found inside an atom. Atomic nuclei are composed of protons, neutrons, and electrons.
The nitrogen atom would form 1 double bond and 2 single bonds in HNO3 to conform to the octet rule. Three potential resonance topologies are desirable just based on the octet rule.
Therefore, Lewis structure for HNO3 is mentioned above.
Learn more about lewis structure from the given link.
https://brainly.com/question/20300458
#SPJ4
Sort the following into the proper waste container/area. 1. Solid Waste 2. Liquid Waste Container 3. Glass Waste Container 4. Trash 5. Sink Match : used filter paper, acetone rinse, broken waterless condenser, leftover water from ice bath, leftover starting material, reaction filtrate, melting point tube,
The institutional architecture that oversees the processes of receiving, source-separating, storing, transferring, processing, and disposing of solid waste.
An effective waste management plan ought to include solid waste disposal. The method of receiving, processing, recovering resources from solid waste, and finally disposing of it is known as integrated solid waste management. An waste management strategy's three main elements are source reductions, reduction, and disposal.
These three types of trash are all essential for the management of solid waste.
It may also include paper, polymer, tetra packages, plastic canisters, glass bottles, metal objects, wood fragments, aluminium foil, and a number of other substances. Food waste, which is categorised as wet rubbish, has the potential to present.
To know more about Waste click here
brainly.com/question/30051726
#SPJ4
What is the molar mass of iron?
55.845 u is the molar mass of iron .
What is molar mass ?
Molar mass is the mass of one mole of a substance, defined as its atomic or molecular mass in grams. It is defined as the number of units (atoms, molecules, ions, etc.) in a substance that contains the same number of units as 12 grams of pure carbon-12. The molar mass of a substance is important because it provides a conversion factor between the mass of a substance and the number of moles of a substance, allowing chemical reactions and composition of compounds to be more easily calculated. Molar mass can be calculated by summing the atomic masses of all atoms in a molecule of a substance. For example, the molar mass of water (H2O) is 18.015 g/mol. This means that 1 mole of water weighs 18.015 grams.
To know more about molar mass , click the link below ;
https://brainly.com/question/837939
#SPJ4
In bonding, main group elements ________ to attain the electronic configuration of the noble gas closest to them in the periodic table.
In bonding, main group elements gain or lose electrons to attain the electronic configuration of the noble gas closest to them in the periodic table.
What is a noble gas?A noble gas is a type of chemical element that is highly unreactive and does not readily form compounds with other elements. The noble gases are located in Group 8 of the periodic table and include helium, neon, argon, krypton, xenon, and radon.
This process loosing or gaining electron, is an attempt to achieve a full valence shell of electrons, which is considered to be a stable electron configuration. By gaining or losing electrons, the main group elements can achieve the electron configuration of a noble gas and thus form stable compounds.
Learn more about bonding at:
https://brainly.com/question/25965295
#SPJ1
g the density of liquid argon just above its melting point is 1.40 g/cm3 . calculate vv for liquid argon.
The molar volume of liquid argon (Vv) is the volume occupied by one mole of the substance. Since the density of liquid argon just above its melting point is 1.40 g/cm3, we can calculate the molar volume of liquid argon by solving the following equation:
Vv = (1 mol/1.4 g) x (1 cm3/1 g) = 0.714 cm3/mol
Therefore, the molar volume of liquid argon is 0.714 cm3/mol.
Liquid volume is a measure of the amount of liquid a container can hold. It is usually measured in liters, gallons, or milliliters. Liquid volume is important in many applications, such as cooking and baking, as well as in laboratory experiments and medicine.
Learn more about Liquid volume
https://brainly.com/question/26216613
#SPJ4
Slicing an average loaf of bread gives 13 medium thickness slices. Each slice of bread is to be coated with 0. 050 oz of mayonnaise. Each sandwich of two bread slices contains one slice of ham and one slice of cheese. Half of the sandwiches need to contain a sliced olive, while the other half have no olive.
36 loaves of bread and 23.1 ounces of mayonnaise are needed to make all of the sandwiches.
A sandwich is a type of food typically composed of two slices of bread with various fillings in between, such as meat, cheese, vegetables, and condiments. Sandwiches are a popular food item for lunch or a quick and convenient meal, as they are portable and easy to eat with one's hands.
The fillings can vary widely, ranging from simple combinations like peanut butter and jelly to more elaborate mixtures like grilled chicken with cheese, lettuce, and mayonnaise.
Explanation:
Number of slices of ham = 231
Given that each sandwich has 1 slice of ham.
Then 231 slices of ham will be in 231 sandwiches
A single sandwich is made up of 2 bread slices, Then bread slices in 231 sandwiches will be: 2 x 231 = 462
Each bread slice is applied with 0.0500 ounces of mayonnaise.
Then 462 bread slices will have 462 x 0.050 oz = 23.1 oz
1 bread loaf = 13 bread slices
Then breads loaves in 462 bread slices: 462 / 13 ≈ 35.5 = 36
Therefore, 36 loaves of bread and 23.1 ounces of mayonnaise are needed to make all of the sandwiches.
To know more about sandwiches refer to:
brainly.com/question/22685080
#SPJ4
what happens if the solvent line reaches the top of your tlc plate?
When the solvent has reached top of plate, the plate is removed from the developing chamber, dried, and the separated components of the mixture are visualized. If the compounds are colored, visualization is straightforward. Usually compounds are not colored, so a UV lamp is used to visualize plates.
Do not allow the solvent front to reach the top of plate. That may cause erroneous Rf values and may cause spots that are close together to run into each other. Take plate out with tweezers and mark the solvent front line with pencil as soon as possible
With the solvent above sample spot, it will be submerged and therefore it will not travel up the plate by capillary action in the mobile phase and as result, no observation will be made as no spots will be on developed plate.
learn more about TLC plate at
https://brainly.com/question/17562109
#SPJ4
select all the statements that correctly represent the reagents and conditions required in the various steps in the synthesis of the target molecule from ethyl benzene.
1. HNO3, H2SO4; 2. NBS, light
1. HNO3, H2SO4; 2. Br2, FeBr3
1. Br2, FeBrg; 2. HNO3, H2SO4
1. HNO3, H2O;2. Br2, heat
In Step A, the reagent is NBS with benzoyl peroxide in CCl4 at 80°C.
In Step B, the reagent is NaOC2H5 in C2H5OH at 50°C.
Acne lesions can be effectively treated with benzoyl peroxide. It has no effect on antibiotic resistance. It can be used with salicylic acid, sulfur, erythromycin, clindamycin, or adapalene (antibiotics) (a synthetic retinoid). Benzoyl peroxide/clindamycin and adapalene/benzoyl peroxide are two frequent combination medicines, with adapalene being a chemically stable retinoid that may be coupled with benzoyl peroxide, unlike Tazarotene and tretinoin.
For the treatment of acne lesions, combination treatments such as benzoyl peroxide/clindamycin and benzoyl peroxide/salicylic acid tend to be somewhat more effective than benzoyl peroxide alone. In the United States, the combination tretinoin/benzoyl peroxide was authorized for medicinal use in 2021.
Learn more about benzoyl peroxide
https://brainly.com/question/14711646
#SPJ4
Consider aqueous solutions of four compounds:
MgCl2,
Na2O, C12H22O11,
C2H5OH
Which two will conduct electricity?
A. MgCl2
and C12H22O11
B. Na2O and C2H5OH
C. MgCl2
and Na2O
D. C12H22O11
and C2H5OH
please answer asap thank you ! will give brainliest :)
Compound A is dissolved in the water and is employed for white washing. Compound B provides the walls a gleaming sheen. Compounds C is a compound used in monochrome photography. (1) AgCl, CaCO3, and Ca, respectively, are components C, A, and B. (OH) CaCO3, AgCl, and 2 (2) Ca (OH) (2) CaO, CaCO3, and AgBr (3) AgCl, CaO, and CaCO3 (4)
In two different beakers, aqueous solutions of the two compounds M-O-H and M'-O-H have been produced. If M, M', O, and H possess s electronegativities of 3.5, 1.72, 3.0, and 2.1, respectively, the solutions are: > Solutions containing of two co... In two distinct beakers, aqueous solutions of the two compounds M O H and M ′ O H have been produced.
Because it is composed of a powerful acid and a stronger base, sodium chloride in freshwater is a neutral molecule. Because a strong base and a weak acid were employed to produce the potassium carbonate aqueous phase, it is neutral.
To know more about Compound click here
brainly.com/question/13516179
#SPJ4
what is the answer to the following calculation: 71.262 4.5 - 6 x 101 5.24
The answer to the calculation 71.262 4.5 - 6 x 101 5.24 is -110.01.
To perform this calculation, it is important to follow the order of operations (PEMDAS), which stands for Parentheses, Exponents, Multiplication and Division (from left to right), and Addition and Subtraction (from left to right).
Starting with the first operation, the calculation inside the parentheses is 4.5 - 6 x 10, which becomes 4.5 - 60.
Next, we multiply 6 and 10 to get 60. Then, we subtract 60 from 4.5, which results in -55.5.
Now that the first set of parentheses is resolved, we can continue to evaluate the expression from left to right. The next two numbers are 71.262 and -55.5, so we add them to get 15.762. Finally, we subtract 5.24 from 15.762, resulting in 10.522.
Therefore, the answer to the calculation 71.262 4.5 - 6 x 101 5.24 is -110.01.
To learn more about calculation, visit:
https://brainly.com/question/12633131#
#SPJ11
how does the law of conservation of mass affect balanced chemical equations?
The law of conservation of mass is a fundamental principle in chemistry that states that the total mass of a system remains constant, regardless of the chemical changes that occur within it.
This law affects balanced chemical equations in the following ways:
The number of atoms of each element in the reactants must equal the number of atoms of that element in the products.To balance the equation, coefficients are added in front of the formulas of the reactants and products to indicate the correct ratio of atoms.Balancing the equation ensures that the total mass of the reactants is equal to the total mass of the products, which satisfies the law of conservation of mass.If the equation is not balanced, the law of conservation of mass would be violated, indicating that the equation is incorrect or incomplete.Learn more about the law of conservation of mass here:
https://brainly.com/question/13891351
#SPJ4
or any of the following that can exist as isomers, state the type of isomerism. [zn(en)f2]
[zn(en)f2] - optical isomer, IZn(H2O)(NH3)FCl] - no isomerism , [Pd(CN)2(OH)2]2 - geometrical isomerism.
[zn(en)f2] - It will be a tetrahedral geometry. It exhibits optical isomerism as 'en' is a bidentate ligand so it will occupy 2 valencies on the same side. It will make a pair of optical isomer
IZn(H2O)(NH3)FCl] - Here we can see that all four ligands are different so it cannot exhibit isomerism. All the ligands are of different shapes, sizes electron densities and steric hindrance
[Pd(CN)2(OH)2]2- Here we have two different monodentate ligands so a particular ligand can be at 'cis' position or 'trans' position hence exhibiting geometrical isomerism
To learn more about Isomerism
brainly.com/question/21130461
#SPJ4
For any of the following that can exist as isomers, state the type of isomerism and draw the structures: (a) [Zn(en)F2] (b) IZn(H2O)(NH3)FCl] (c) [Pd(CN)2(OH)2]2?
which of the following samples should be used as the background blank to calibrate the spectrometer
DI water should be used as the background blank to calibrate the spectrometer.
A spectrophotometer is a device used to measure the intensity of light as a function of its wavelength. In order to ensure accurate results, it is necessary to calibrate the spectrophotometer using a background blank. The background blank is used to account for any background interference that may affect the measurement. DI water, or deionized water, is a common choice for the background blank because it is pure and has a neutral pH, making it a good choice to ensure accuracy. Iron(III) nitrate and potassium thiocyanate solutions contain ions that may affect the measurement, so they are not suitable for use as a background blank. Iron(III) thiocyanate complex ion stock solution is a more specialized solution and is not typically used as a background blank for spectrophotometry.
Learn more about spectrophotometer here: brainly.com/question/24195565
#SPJ4
Complete question:
Which of the following samples should be used as the background blank to calibrate the spectrophotometer? Choose the single best answer.
A. Iron(III) nitrate solution
B. Iron(III) thiocyanate complex ion stock solution
C. DI water
D. Potassium thiocyanate solution.
which of these compounds would be considered an acid? * a. hcl b. nacl c. naoh d. ch4
The compounds that would be considered an acid is the correct option is a. HCl ( hydrochloric acid).
The acids are the substance that produces the hydrogen ions when dissolves in the water. The bases are the substance that produces the hydroxide ions when dissolve in the water.
1) HCl is the hydrochloric acid , it is a strong acid as when it dissolve in the water it donate more hydrogen ions.
2) NaCl is the sodium chloride , it neither a base or nor the acid . It is a neutral salt.
3) NaOH is the sodium hydroxide , it is the base as it donates the hydroxide ions when dissolve in the water.
4) CH₄ is the methane and it is not the acid or the base. It is a neutral compound.
To learn more about acids here
https://brainly.com/question/2166825
#SPJ4
When 14. 00 ml of hcl of unknown concentration (but less than that of the base) are reacted with 13. 00 ml of 2. 15 m naoh, 1. 56 kj of heat are released. What is the molarity of the hcl solution?.
The molarity of the HCl solution is 1.99 M
For a variety of uses in chemistry, neutralizing reactions between acids and bases are utilized to create a neutral product (salt). As a result, since the HCl and NaOH reaction is the subject of this question, we can write:
HCl+NaOH ⇒NaCl +H₂O
How is molarity determined?The following formula can be used to determine a solution's molarity:
M₁V₁ = M₂V₂
Where;
M₁ is the acid's molarity.
M₂ is the base's molarity.
V₁ = acid volume
V₂ is the base volume.
Where there is a 1:1 mole ratio between the acid and the base, allowing us to set up the following:
M acid Vacid =Mbase Vbase
Macid 14. 00 ml = 2. 15 M 13. 00 ml
M acid = 2.15 x 13 / 14
M acid = 1.99 M
Learn more about neutralization reactions: brainly.com/question/4612545
#SPJ4