Board cases involving eligibility or disciplinary issues that are resolved through a board agreed order

0.723 is the [H ] (molarity) before any base is added.

the balanced equation for the acid-base reaction is

KOH + HClO₄ ---> KClO₄ + H₂O

stoichiometry of KOH to HClO₄ is 1:1

The number of HClO₄ moles - 0.723 M / 1000 mL/L x 25.0 mL = 0.0181 mol

Number of KOH moles - 0.27 M/ 1000 mL/L x 80.0 mL = 0.0216 mol

KOH is a strong acid and HClO₄ is a strong base therefore complete dissociation takes place.

the acid reacts with base in a 1:1 molar ratio, there's excess base remaining.

excess OH⁻ ions - 0.0216 - 0.0181 = 0.0035 mol

concentration is calculated as the number of moles/volume

volume of solution - 25.0 + 80.0 = 105.0 mL

[OH⁻] = 0.0035 mol / 0.105 L = 0.033 M

pOH = -log [OH⁻]

pOH = -log(0.033 M)

pOH = 1.48

pH can be calculated by knowing the pOH

pH + pOH = 14

pH = 14 - 1.48 = 12.52

pH = -log [H₃O⁺]

[H₃O⁺] = antilog(-12.52)

[H₃O⁺]  = 3.0 x 10⁻¹³ M

0.723 is the [H ] (molarity) before any base is added.

To know more about molarity refer to:  https://brainly.com/question/8732513

#SPJ1

Derivatization means adding fluorescent labels or combining the analyte with chiral reagents or other chemicals to increase detectability.

Some analytes must be derivatized to increase their column retention or detectability.

Retention time can be referred to as the amount of time a solute spends in the stationary and mobile phases of a column.

Detectability is the ability of an analyte to get detected in the mobile phase of chromatography.

The refractometer, fluorescence detector, and UV detector are the three most popular liquid chromatography detectors. These detectors increase the detectability.

For derivatization, the fluorescence detector are used.

Learn more about derivatization

https://brainly.com/question/17609332

#SPJ4

Answer:

Explanation:  The reaction between hydrazine and hydrogen peroxide yields nitrogen and water. The balanced chemical reaction is:

N2H4 + 2H2O2  N2 + 4H2O

which means that the mole ratio between hydrazine and hydrogen peroxide is 1:2 and the mole ratio between hydrazine and water is 1:4.

2.7 is the chlorine dosage for this well, expressed in parts per million.

Unlike municipal water, well water does not go through a water treatment facility. That implies that it could be contaminated with poisons like lead, coliform bacteria, volatile chemical compounds, and others. chlorination in well water is done to fulfill the role that chlorine plays in municipal sources' water disinfection processes.

It is advised to start with a chlorine concentration of 50 to 100 parts per million (ppm).

Bacterial pollutants are eliminated from well water, well casings, holding tanks, and the entire water delivery system via shock chlorination. To shock chlorinate, a well driller with a license is trained.

Algae have been linked to green water, and they may thrive in both surface water and groundwater wells even in the absence of sunshine. Algae can color the water in both the pre-and post-decomposition stages with a variety of hues, including green, brown, and reddish.

To know more about chlorination refer to:  https://brainly.com/question/13347874

#SPJ1

Mass of water produced is equal to 7.2 grams.

The reactants are reacting according to the following equation:

HBr + NaOH = NaBr + H2O

1 mole of HBr requires 1 mole of NaOH to be totally transformed into NaBr and water.

Now, let us calculate the amounts of HBr and NaOH in mols:

m(HBr) = 67.2g

m(NaOH) = 16g

M(HBr) = 80.9g/mol

M(NaOH) = 40g/mol

Following the simple relation

n(moles) = m(grams)/M(g/mol)

n(HBr) = 67.2g/(80.9g/mol)

n(NaOH) = 16g/(40g/mol)

n(H2O) = n(NaOH) = 0.40 mol, which is:

m(H2O) = n(H2O) x M(H2O)

0.40mol∗18g/mol=7.2g

Finally, the mass of water produced is equal to 7.2 grams.

Learn more about Hydrobromic acid here:

https://brainly.com/question/21544156

#SPJ4

Hydrocarbons (typically petroleum products), which separate in water and have a Specific Gravity of less than one, represent a significant hazard to firefighters. Why?

Any member of the class of organic chemical compounds known as hydrocarbons only includes the atoms carbon (C) and hydrogen (H). The hydrogen atoms bond to the carbon atoms in a variety of ways to create the compound's structural framework.

Although there could be thousands of different hydrocarbon molecules in a given crude oil, these descriptions only focus on the type of hydrocarbon that predominates in the combination. Typically, each sort of molecule can be found in all naturally occurring crude oils.

Learn more about Hydrocarbons here:-

https://brainly.com/question/11162848

#SPJ4

Answer:

carbon atoms tend to make four bonds, each carbon atom will have the number of hydrogen atoms that are required for four bonds. This compound contains 16 hydrogen atoms for a molecular formula of C 8 H 16.

Explanation:

The oxidation number for S in the compound SO3 is +6 (option D). Details about oxidation number can be found below.

Oxidation number of an element is the hypothetical charge of an atom within a molecule.

The oxidation number of elements in a compound adds up to the overall charge of that compound.

According to this question, O has an oxidation number of -2 in SO3, the oxidation number of S can be calculated as follows:

x - 2(3) = 0

x - 6 = 0

x = 6

Therefore, the oxidation number for S in the compound SO3 is +6.

Learn more about oxidation number at: https://brainly.com/question/15167411

#SPJ1

The answer is D: 6+

Worked for me on EDGE 2023

Answer:

C. Parasympathetic

Explanation:

Part of the investigation must be measuring the pressure inside the lighter fuel tank.

The pressure of gas measures how compact the gas molecules are. We know that the more compacted the gas molecules are, the more likely the gas will exist in the liquid state.

Hence, part of the investigation must be measuring the pressure inside the lighter  fuel tank.

Learn more about pressure of a gas:https://brainly.com/question/356658

#SPJ1

Answer: 2Al(s) + 3CuSO4(aq) → Al2(SO4)3(aq) + 3Cu(s)

Explanation: The quantities of aluminum and copper sulfate used as reactants will be such that the copper sulfate will be in excess. Thus, the aluminum will be the limiting factor in determining the number of moles (gram-atoms) of products that will be formed.

Answer:

» Chlorine (Cl) is the oxidizing agent because it gains an electron.

Explanation:

Oxidization is the process of losing electrons during an ionic reaction.

In the reaction above, aqueous chlorine captures the electrons of bromide ion hence becoming oxidized. In this sense, since aqueous chlorine is the one gaining electrons, it oxidizes bromide to bromine

[tex]{ \rm{Cl _{2(aq)}+ 2Br {}^{ - } _{(aq)} \dashrightarrow 2Cl {}^{ - } _{(aq)} + Br _{2( aq)}}}[/tex]

Answer:

c

Explanation:

edge 2022

The products will be [tex]ZnCl_2(s) + H_2(g)[/tex]

Zn is higher than hydrogen in the reactivity series. Thus, it will be able to displace hydrogen from the acid.

The equation of the reaction becomes: [tex]Zn(s) + HCl(aq) -- > ZnCl_2 (s) + H_2 (g)[/tex]

Hydrogen gas is released as a result. In fact, it is one of the ways of preparing hydrogen gas in the laboratory.

More on chemical reactivity can be found here: https://brainly.com/question/9621716

#SPJ1

A chemical engineer has determined by measurements that there are 7.0 moles of carbon in a sample of nickel tetracarbonyl. 7 moles of oxygen are in the sample.

Stoichiometry helps us use the balanced chemical equation to measure quantitative relationships and it is to calculate the amounts of products and reactants that are given in a reaction.

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

According to Stoichiometry

[tex]7\ \text{mol C} \times \frac{1\ \text{mol O}}{1\ \text{mol C}}[/tex]

= 7 mol O

Thus from the above conclusion we can say that A chemical engineer has determined by measurements that there are 7.0 moles of carbon in a sample of nickel tetracarbonyl. 7 moles of oxygen are in the sample.

Learn more about the Stoichiometry here: https://brainly.com/question/16060223

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: This is the chemical formula for Nickel Tetracarbonyl (a powerfully poisonous liquid used in Nickel Refining).

Ni(CO)₄

A chemical engineer has determined by measurements that there are 7.0 moles of carbon in a sample of nickel tetracarbonyl. How many moles of oxygen are in the sample ?

Based on the type of experiment that is being conducted:

This is the term that is used to refer to the variable that is used to arrive at conclusions about the dependent variable.

The experiment is trying to tell us that the temperature of a material is the function of the heat applied to it and the type of material.

This is the term that is used to refer to the variable of interest. It is what is being tested in the experiment.

Read more on dependent and independent variables here:

https://brainly.com/question/25223322

#SPJ1

The missing part of the equation is found to be 4/2He. Option A

The term nuclear equations have to do with the type of equation in which one type of nucleus is transformed into another sometimes by the bombardment or loss of a particle.

Now the full equation ought to be written as 7/3Li + 1/1H -----> 4/2He + 4/2He. This is because the total mass on the left is 8 and the total charge on the left is 4.

Learn more about nuclear equations:https://brainly.com/question/19752321

#SPJ1

Answer: silver nitrate

Explanation:

it is the only soluble salt listed.

Answer:

speed=distance/time taken

=300km/3hr

=100km/hr

So it is true.

please give brainlest and like

Answer:

Mn₁O₂

Explanation:

To find the empirical formula, you need to (1) determine how many grams of each element are within the compound, then (2) convert grams to moles (via the atomic masses of each element), and then (3) determine the mole-to-mole ratio of each element.

(Step 1)

Because the percents add to equal 100%, we can say that each percent is the mass of each element.

63% Mn ----> 63 grams Mn

37% O ----> 37 grams O

(Step 2)

We need to convert each mass to moles using the atomic masses. The atomic masses are a ratio comparing the mass of each element per every 1 mole.

Atomic Mass (Mn): 54.983 g/mol

Atomic Mass (O): 15.998 g/mol

63 grams Mn                 1 mole
----------------------  x  -------------------------  =  1.15 moles Mn
                                 54.983 grams

37 grams O                1 mole
--------------------  x  ------------------------  =  2.31 moles O
                               15.998 grams

(Step 3)

You can find the mole-to-mole ratio of each element in the compound by dividing the calculated mole values by the smallest mole value. In this case, since 1.15 moles was the smallest value calculated, it should be the divisor. The resulting amounts are the subscripts within the empirical formula.

1.15 moles Mn / 1.15 moles  =  1 moles Mn

2.31 moles O / 1.15 moles  =  2 moles O

Ratio of MnO = 1:2

This make the empirical formula: Mn₁O₂

The molecular formula of the compound is C15H12O3.

The molecular formula of the compound is determined from the mole ratio of the elements in the compound.

Carbon = 0.75 × 240/12 = 15

Hydrogen = 0.0505 × 240/1 = 12

Oxygen = 0.1995 × 240/16 = 3

Therefore, the molecular formula of the compound is C15H12O3

In conclusion, the molecular formula of the compound is determined from the mole ratio of the elements and their percentage composition.

Learn more molecular formula at: https://brainly.com/question/15092254

#SPJ1

Answer:

Explanation:

244 days

will you brainlyest?

The half life of the Zn-65 sample if it decays from 65 g to 2.9 g in 3 years is 1.53 years. This can be obtained using the first order kinetic of nuclear decay.

Nuclear decay is the process by which unstable isotopes of an atom decays by the emission of alpha or beta particles to form stable nuclei. Nuclear decay is a first order reaction and the decay constant k can be written as:

k = 1/t log [no]/[nt]

Where, no and nt be the initial and final amount of the sample.

Given that the initial mass of Zn was 65 g and after 3 years it is 2.90 gram. Thus, decay constant is calculated as :

k = 1/3 yrs log (65/2.9)

  = 0.45 yr⁻¹.

Now, the half life of Zn-65 can be calculated as:

t1/2 = 0.693/ k

      = 0.693/0.45  yr⁻¹

      = 1.53 yrs.

Therefore, the half life of Zn-65 will be 1.53 years.

To find more on nuclear decay, refer here:

https://brainly.com/question/12224278

#SPJ2

the empirical formula for a compound is Mo2Br5Cl3.

The empirical components of a compound are the best entire quantity ratio of atoms of every detail within the compound. it's miles decided using statistics from experiments and therefore empirical. as an example, the molecular formula of glucose is C 6H 12O 6 however the empirical formulation is CH 2O.

An Empirical formula is the chemical components of a compound that offers the proportions (ratios) of the elements present in the compound however no longer the real numbers or arrangement of atoms. This will be the lowest complete range ratio of the elements within the compound.

The empirical method of a compound gives the only ratio of the range of various atoms gift, while the molecular formula gives the actual range of each distinctive atom found in a molecule. If the components is simplified then it is an empirical components.

Learn more about the Empirical formula  here: https://brainly.com/question/13058832

#SPJ4

The two basic geologic processes which contributed to the formation of folded mountain ranges like in Glacier National Park include:

This is a geologic process which involve materials in the earth being washed away and transported to other parts by water, wind etc.

In the case of Glacier National Park, ice erodes the mountain thereby resulting in the folding of the sedimentary rocks.

Read more about Glacial erosion here https://brainly.com/question/8880387

#SPJ1

To make a solution of lemonade, lemon juice and sugar are dissolved in water. the water is the Solvent in this example.

Solvent Examples. Common examples of solvents consist of water, ethanol, methanol, and acetone. The term 'solvent' may be defined as a substance that has the ability to dissolve a given solute to form a solution with it.

Solvents are substances that are used to dissolve the solutes used in the formulation. These solutes can be solids, liquids, or gaseous in nature. Thus solvents are used to get a solution upon interacting the solute with a suitable solvent.

Solvents are usually, however not usually, liquids. They can also be gases or solids. The material dissolved in the solvent is referred to as the solute. collectively, the solvent and solute comprise the solution.

Learn more about Solvent here https://brainly.com/question/25326161

#SPJ4

The average atomic mass of sulfur = 32.33 u

The average atomic mass of sulfur is determined as follows:

Average atomic mass = (31.977 × 0.818) + (32.97 × 0.008) + (33.97 × 0.174)

Average atomic mass = 32.33

In conclusion, the average atomic mass of sulfur is determined from the sum of the isotopic masses and their relative abundance.

Learn more about average atomic mass at: https://brainly.com/question/6200158

#SPJ1

Fractional distillation is used for the refining of crude petroleum.

Fractional distillation is the procedure used to separate crude oil's numerous constituents.

Learn more about fractional distillation here:

https://brainly.com/question/15187318

#SPJ4

Answer:

FeCO₃,  Fe(IO₃)₂,  Pb(CO₃)₂,  Pb(IO₃)₄

Explanation:

Cations (positively charged ions) can only form ionic bonds with anions (negatively charged ions). However, you can't just simply put one cation and one anion together to form a compound. Each compound needs to been neutral, or have an overall charge of 0. When cations and anions do not have charges that perfectly cancel, you need to modify the amount of each ion in the compound.

1.) FeCO₃

-----> Fe²⁺ and CO₃²⁻

-----> +2 + (-2) = 0

2.) Fe(IO₃)₂

-----> Fe²⁺ and IO₃⁻

-----> +2 + (-1) + (-1) = 0

3.) Pb(CO₃)₂

-----> Pb⁴⁺ and CO₃²⁻

-----> +4 + (-2) + (-2) = 0

4.) Pb(IO₃)₄

-----> Pb⁴⁺ and IO₃⁻

-----> +4 + (-1) + (-1) + (-1) + (-1) = 0

[tex]\rm FeCO_3, Fe(IO_3)_2, Pb(CO_3)_2, Pb(IO_3)_4[/tex] are the empirical formula for at least four ionic compounds that could be formed from the given ions.

Ions, which are atoms or molecules with one or more lost or acquired electrons and an electric charge, are bonded together to create ionic compounds, a particular class of chemical complex. A metal cation (a positively charged ion) and a non-metal anion (a negatively charged ion) typically make up these compounds. Ionic bonding is a process that leads to the synthesis of ionic compounds. A non-metal atom becomes a negatively charged anion when it gets one or more electrons, while a metal atom becomes a positively charged cation when it loses one or more electrons.

To know more about ionic compounds, here:

https://brainly.com/question/30420333

#SPJ7

Suppose 110.0 mL of hydrogen gas at STP combines with a stoichiometric amount of fluorine gas and the resulting hydrogen fluoride dissolves in water to form 150.0 mL of an aqueous solution. 0.032 M is the concentration of the resulting hydrofluoric acid.

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now write the balanced chemical equation

H₂ + F₂ → 2HF

An ideal gas is a gas that obey gas laws at all temperature and pressure conditions. It have velocity and mass but do not have volume. Ideal gas is also called perfect gas. Ideal gas is a hypothetical gas.

It is expressed as:

PV = nRT

where,

P = Pressure

V = Volume

n = number of moles

R = Ideal gas constant

T = temperature

Here,

P = 1 atm   [At STP]

V = 110 ml = 0.11 L

T = 273 K   [At STP]

R = 0.0821   [Ideal gas constant]

Now put the values in above expression

PV = nRT

1 atm × 0.11 L = n × 0.0821 L.atm/ K. mol × 273 K

[tex]n = \frac{1\ \text{atm} \times 0.11\ L}{0.0821\ \text{L. atm/ K. mol} \times 273\ K}[/tex]

n = 0.0049 mol

To calculate the concentration of resulting solution use the expression

[tex]C = \frac{n}{V}[/tex]

   [tex]= \frac{0.0049}{0.15}[/tex]  

   = 0.032 M

Thus from the above conclusion we can say that Suppose 110.0 mL of hydrogen gas at STP combines with a stoichiometric amount of fluorine gas and the resulting hydrogen fluoride dissolves in water to form 150.0 mL of an aqueous solution. 0.032 M is the concentration of the resulting hydrofluoric acid.

Learn more about the Ideal Gas here: https://brainly.com/question/25290815
#SPJ4

There is nearly 1000 times more uranium diffused in our oceans as compared to mine on land.

The world ocean contain more than 4 billion metric tons of dissolved uranium . Uranium is removed from ocean by diffusion across the sediment-water interface of organic-rich sediments.

Uranium ore is deposits are economically recovered within earth crust. The uranium elements is common elements present in earth crust as it found 40 times more as compare to silver and 500 times more as compare to gold. It can found in everywhere in the rock , soil, river, and ocean.

learn about Uranium

https://brainly.com/question/9099776

#SPJ4

Metal which produces hydrogen gas:

Aluminum metal produces hydrogen gas with dilute hydrochloric acid as well as sodium hydroxide.

What are amphoteric oxides?

Amphoteric oxides are the metal oxides which reacts with both acids and bases.

Some metals are also amphoteric, ie. on reaction with acid or base, the product will be salt and Hydrogen gas.

Amphoteric metal + acid/base →  salt + hydrogen gas

Few metals of the periodic table are amphoteric in nature. Like Aluminum, Zinc etc.

Reactions:

Reaction with dilute NaOH:

2Al + 2NaOH + 2[tex]H_{2}[/tex]O → 2NaAl[tex]O_{2}[/tex] + [tex]H_{2}[/tex]

Reaction with dilute HCl:

2Al + 6HCl(aq) → 2Al[tex]Cl_{3}[/tex] + 3[tex]H_{2}[/tex]

Dilute and Aqueous (aq) means mixed with water ([tex]H_2O[/tex])

These reaction are balanced in order to follow the Law of conservation of mass.

Learn more about balanced reactions here,

https://brainly.com/question/14263388

#SPJ4