Generally, body fluid pH is strictly maintained by efflux across plasma membrane, buffering systems and acid excretion.
We can define, a buffer system as a solution which generally resists a change in pH when acids or bases are added. Basically, acidic solutions contain high concentrations of hydrogen ions (H+) and have pH values less than seven.
Generally, the transport across the plasma membrane occurs unaided through simple diffusion, i.e., molecules of gases such as carbon dioxide and oxygen, as well as small molecules like ethanol, enter the cell by crossing the cell membrane without any type of the assistance of any permease.
Generally in renal physiology, net acid excretion (NAE) is defined as the net amount of acid excreted in the urine per unit time. The value of NAE depends upon the flow rate of the urine.
Learn more about pH balance from the link given below.
https://brainly.com/question/3308661
#SPJ4
The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.
-Directly proportional, indirectly proportional
-Directly proportional, directly proportional
-Indirectly proportional, indirectly proportional
-Indirectly proportional, directly proportional
-None of the above
The voltage produced by the colorimeter is directly proportional to the absorbance of the sample and directly proportional to the light intensity.
What is colorimeter?A colorimeter is a tool used to measure color. The colorimeter is sensitive to the light being measured and how much color is absorbed by an object or substance. The colorimeter determines color based on the red, blue, and green components of the light absorbed by the object or sample.
There are different types of colorimeters, including color densitometers, which measure the density of primary colors, and color photometers, which measure reflection and color transmittance.
So that the voltage generated by the colorimeter is directly proportional to the absorbance of the sample and directly proportional to the intensity of the light
Learn more about colorimeter wavelength selection here :
https://brainly.com/question/3277193
#SPJ4
Which atomic orbitals from carbon hybridize to form the bonds in CH4? A) 1s, 2p_x, 2p_y, 2p_Z B) 2s, 2p_x, 2p_y, 2p_z C) 38, 3p_x, 2p_y, 2p_z D) 25, 2p_x, 2p_y
A hybrid orbital is a linear combination of atomic orbitals of the same atom. The orbitals which hybridize to form the bonds in CH₄ are 1s, 2pₓ, 2py, 2pz. The correct option is A.
What is hybridization?The process hybridization is the intermixing of various atomic orbitals of slightly different energies in the same atom with redistribution of their energies to yield a new set of orbitals of equivalent energies and shapes.
Here the orbitals of 'C' in excited state are 1s²2s¹2px¹2py¹2pz¹. So the 2s and the three 2p orbitals of 'C' mix among themselves with redistribution of energy to form four new sp³ hybrid orbitals.
Thus the correct option is A.
To know more about hybridization, visit;
https://brainly.com/question/29020053
#SPJ1
Complete the sentences by matching the names of trees to the appropriate blanks. To do this, drag the names on the left into the appropriate blanks in the sentences on the right.
1. Conifer leaves are generally thin and needle-like, while seeds are contained in cones. Conifers include pine and cedar.
2. Evergreens are plants that maintain their leaves in all seasons and include trees such as pine, cedar, and mango.
3. Hardwoods reproduce using flowers and have broad leaves; hardwoods include trees such as maple, elm, and mango.
4. Deciduous trees lose their leaves seasonally and include trees such as maple and elm.
The classification of trees is as follows:
1. Conifer leaves are generally thin and needle-like, while seeds are contained in cones. Conifers include pine and cedar.
2. Evergreens are plants that maintain their leaves in all seasons and include trees such as pine, cedar, and mango.
3. Hardwoods reproduce using flowers and have broad leaves; hardwoods include trees such as maple, elm, and mango.
4. Deciduous trees lose their leaves seasonally and include trees such as maple and elm.
What are the various types of trees?Deciduous and coniferous trees are the two main types of trees. Since the leaves of deciduous trees tend to be wider and larger than those of conifers, they are sometimes known as broadleaf trees.
There are trees in each of the three main classes of vascular plants: angiosperms, gymnosperms, and pteridophytes (seedless vascular plants like tree ferns) (flowering plants).
Learn more about the classification of trees at: https://brainly.in/question/6823299
#SPJ1
how to using watch glass chemistry?
Watch glass is used in weighing desired amount of solid.
Watch glass is majorly used in weighing desired amount of solid that is to be used in chemical reaction, a watch glass is often placed on the scale, which is then followed by taring or zeroing of the scale so that only the weight of the sample substance is obtained excluding the weight of the watch glass. A watch glass is not only used for observing precipitation patterns and crystals, it is also used for drying solids.
A watch glass is generally round in shape, it is concave glass dish which is used for evaporation in chemistry. Watch glass can also be employed for weighing solids and as a lid for flasks and beakers.
Hence, watch glass is one of the useful component of chemistry lab.
Learn more about watch glass from the link given below.
https://brainly.com/question/10936221
#SPJ4
what is the common name of the rectangular vessel where the solution to be analyzed by uv-vis spectrometry is poured into?
The common name of the rectangular vessel where the solution to be analyzed by UV-Vis spectrometry is poured into is a "cuvette" or "spectrophotometer cuvette". A cuvette is a small rectangular container made of clear optical grade glass, quartz, or plastic material, which is designed to hold the sample solution and allow light to pass through it for analysis. Cuvettes are widely used in spectrophotometry and other forms of optical spectroscopy, and are available in a range of sizes and path lengths depending on the specific application.
What is UV-Vis spectrometry?
UV-Vis spectrometry is a technique that uses ultraviolet and visible light to measure the absorbance or transmission of light by a sample. It is commonly used in analytical chemistry to determine the concentration of a substance in a solution, based on its absorbance characteristics at specific wavelengths. This technique can provide valuable information about the electronic structure, concentration, and purity of a sample, making it a powerful tool in many fields of research and industry.
Hence, the answer is the common name of the rectangular vessel where the solution to be analyzed by UV-Vis spectrometry is poured into is a "cuvette" or "spectrophotometer cuvette".
To learn more about UV-Vis spectrometry, follow the link:
https://brainly.com/question/16982345
#SPJ4
draw the lewis structure of H2CO3
The lewis structure of the H₂CO₃ is as follows :
: O :
||
H - : O : - C - : O : - H
The H₂CO₃ is the carbonic acid. The total valence electrons in the carbonic acid that is H₂CO₃ is the 24 electrons. the carbonic acid contains the one carbon atom that is doubly bonded to the one oxygen atom and it is singly bonded to the two other oxygen atoms. The lewis structure is also called as the electron dot structure and it is as follows :
: O :
||
H - : O : - C - : O : - H
Tao learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
What is the formula for dimensional analysis?
Answer:
Q=M,L,T then MLT is called the dimension formula and the components a,b,c are called the dimension
5. Given the following equation:8Fe + S8 → 8FES
a. What is the number of moles of iron needed to react with 16.0 grams of sulfur?
The number of moles of iron needed to react with 16.0 moles of sulfur is 128.0 moles.
What do you mean by the term mole ?The term mole is defined as a standard scientific unit for measuring large quantities of very small particles such as atoms, molecules, or other specified particles.
one mole is equal to 6.023 × 10²³ molecules.
To calculate of number of moles of iron
Given equation as follows:
8Fe + S8 ⇒ 8 FeS
Moles of sulfur = 16.0
To react 1 mole of sulfur, we need 8 moles of Fe
Then, for 16.0 moles of sulfur we need
= 16 × 8
= 128 moles
Thus, the number of moles of iron needed to react with 16.0 grams of sulfur is 128 moles.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ1
2.0 g calcium (Ca) reacts with 1.9 g fluorine (F2) to form 3.9 g of calcium fluoride (CaF2).
According to law of conservation of mass, 2.0 g calcium reacts with 1.9 g fluorine to form 3.9 g of calcium fluoride .
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Mass of reactants=mass of products which is 2+1.9=3.9 g which is equal to mass of product hence law of conservation of mass,is obeyed.
Learn more about law of conservation of mass,here:
https://brainly.com/question/15289631
#SPJ9
how is the pressure of the vaporized liquid determined?
The pressure of the vaporized liquid, or vapor pressure, can be determined by a variety of experimental and theoretical methods,Here are a few examples:
1) Experimental determination: The vapor pressure can be measured experimentally using a variety of techniques, such as the isothermal-isobaric (vapor pressure) or isothermal-isochoric (vapor-liquid equilibrium) methods. In these methods, the liquid is heated in a closed container at a constant temperature, and the pressure of the vapor above the liquid is measured. The pressure is gradually increased until the vapor pressure equals the applied pressure. The pressure at this point is the vapor pressure of the liquid.
2) Antoine equation: The Antoine equation is a mathematical model that relates the vapor pressure of a substance to its temperature. This equation is based on empirical data and takes the form: log10(P) = A - (B / (T + C)), where P is the vapor pressure, T is the temperature in Kelvin, and A, B, and C are empirical constants. By fitting the Antoine equation to experimental vapor pressure data, the vapor pressure of a substance at any temperature can be predicted.
3) Clausius-Clapeyron equation: The Clausius-Clapeyron equation is a theoretical relationship that describes the dependence of the vapor pressure of a substance on its enthalpy of vaporization and temperature. This equation takes the form: ln(P2/P1) = (ΔHvap/R)((1/T1) - (1/T2)), where P1 and P2 are the vapor pressures at temperatures T1 and T2, ΔHvap is the enthalpy of vaporization, R is the gas constant, and T1 and T2 are the temperatures in Kelvin. This equation can be used to predict the vapor pressure of a substance at any temperature, given its enthalpy of vaporization.
For more questions on pressure
brainly.com/question/24719118
#SPJ4
Why is potassium important for our body? What are the healthy levels of potassium intake?
Potassium is important for maintenance a normal blood pressure in our body. The healthy levels of potassium intake is 4700 mg for an adult.
Potassium is found naturally in many foods and supplements. The main role of the body is to maintain normal fluid levels inside the cells. Potassium also helps muscle contraction and maintains normal blood pressure. Higher intakes may help reduce the risk of high blood pressure, salt sensitivity and stroke. It can also prevent osteoporosis and kidney stones. Sources of potassium include dried apricots, lentils, pumpkin, prunes, potatoes, beans and bananas. The average adult's recommended potassium intake is 4,700 milligrams (mg) per day.
To learn more about potassium, visit :
https://brainly.com/question/29897293
#SPJ4
What is the force needed to accelerate a sled with a mass of 2 kg at a rate of
3.0 m/s²?
O
A. 2.0 N
B. 6.0 N
C. 1.5 N
D. 3.0 N
When the elevator has an upward acceleration of magnitude 2. 90 m/s2 , what does the scale read?.
Apparent weight = 639 N + (65.14 kg x 2.9 m/s²) = 835 N [2].When the elevator has an upward acceleration of magnitude 2.90 m/s², the reading on the scale will be different from the person's normal weight due to the apparent weight caused by the elevator's acceleration .
The apparent weight is the force experienced by the person inside the elevator, and it is related to the actual weight and the acceleration of the elevator.To calculate the apparent weight of a person in an elevator, we can use the formula:
apparent weight = actual weight + (mass of the person x acceleration of the elevator)
where the mass of the person is equal to the actual weight divided by the acceleration due to gravity, which is 9.81 m/s².
For example, if a person's normal weight is 639 N (about 65.14 kg) and the elevator has an upward acceleration of 2.9 m/s², the apparent weight will be:
apparent weight = 639 N + (65.14 kg x 2.9 m/s²) = 835 N [2]
Similarly, if a person's normal weight is 655 N and the elevator has an upward acceleration of 2.9 m/s², the scale reading will be different from their normal weight, and the apparent weight can be calculated using the above formula
Find more about apparent weight
brainly.com/question/8853595
#SPJ4
What is the molar mass of Zn in grams mole?
The molar mass of the Zn in the grams/ mole is the 65 g / mol.
The Zinc is the chemical element with the symbol of the Zn and the atomic number of the zinc 30. The Zinc is the slightly brittle metal at the room temperature and it has the shiny greyish appearance when it oxidation is removed. The zinc is the first element in the group 12 in the periodic table.
The noble electronic configuration of the zinc is as :
Electron configuration: [Ar] 3d¹⁰4s²
The zinc is the plays the role in the creation of the DNA, growth of the cells, the building proteins, the healing damaged tissue, and it will be supporting the healthy immune system. The molar mass of the zinc is 65 g/mol.
To learn more about molar mass here
https://brainly.com/question/22997914
#SPJ4
Is homeostasis an internal environment?
Homeostasis is the maintenance of a stable internal environment inside a cell and therefore inside a living organism. We can say it is an internal environment.
We know cell maintains cell temperature, fluid balance, sugar balance etc. this is actually maintaining the steady state between internal conditions and outer environment.
As mentioned above internal environment can include temperature, pH, and concentration of various ions and nutrient etc.
The body actually maintains these variables through various feedback mechanisms. This is to ensure optimal and good functioning of cells. Not only cells but tissues, and organs also.
Homeostasis is a very crucial thing for the survival of a living organisms. Even the slightest deviations from the optimal ranges can have significant negative consequences. The consequences can be cellular and physiological functions.
Learn more about Homeostasis:
https://brainly.com/question/2826402
#SPJ4
A 2.914 g sample of gypsum, a hydrated salt of calcium sulfate (CaSO4) is heated at a temperature greater than 170C in a crucible until a constant mass is reaced. The mass of the anhydrous CaSO4 salt is 2.304 g. Calculate the percent by mass of water in the hydrated calcium sulfate.
The percent by mass of water in the hydrated calcium sulfate is 20.95%.
What is mass?
Mass is a fundamental property of matter that represents the amount of matter in an object. It is a scalar quantity that is measured in kilograms (kg) or grams (g), and it is always conserved in any physical or chemical process.
To calculate the percent by mass of water in the hydrated calcium sulfate, we need to determine the mass of water that was present in the hydrated salt before heating. We can then use this value to calculate the percent by mass of water as follows:
Determine the mass of water lost during heating:Mass of water = Mass of hydrated salt - Mass of anhydrous salt
Mass of water = 2.914 g - 2.304 g
Mass of water = 0.610 g
Calculate the percent by mass of water:Percent by mass of water = (Mass of water / Mass of hydrated salt) x 100%
Percent by mass of water = (0.610 g / 2.914 g) x 100%
Percent by mass of water = 20.95%
Therefore, the percent by mass of water in the hydrated calcium sulfate is 20.95%.
To learn more about mass:
https://brainly.com/question/1838164
#SPJ4
Part A Which answer best explains how nitrogen deficiency in plants causes chlorosis at the tips of older leaves? ONitrogen is a component of all enzymes, so new growth will stop if nitrogen is deficient. ONitrogen regulates proton pumps that supply energy to growing tissue at the tips of older leaves. ONitrogen is a component of chlorophyll, but it is mobile and is re-located from older leaves to growing parts. ONitrogen is necessary to synthesize chlorophyll in mature areas of older leaves.
The answer best explains how nitrogen deficiency in plants causes chlorosis at the tips of older leaves will be Nitrogen is necessary to synthesize chlorophyll in mature areas of older leaves. Option D is correct.
Chlorosis is the yellowing of leaves, which occurs when plants cannot produce enough chlorophyll. Nitrogen is an essential component of chlorophyll and is required for its synthesis. When plants are deficient in nitrogen, they cannot produce enough chlorophyll in mature areas of older leaves.
Option A is incorrect because while nitrogen is a component of many enzymes, a nitrogen deficiency would not cause new growth to stop since new growth relies on other essential nutrients as well.
Option B is also incorrect since proton pumps are not directly regulated by nitrogen and proton pumps do not specifically supply energy to growing tissue at the tips of older leaves.
Option C is partially correct, as nitrogen is indeed mobile and can be re-located from older leaves to growing parts of the plant. However, this does not explain why nitrogen deficiency causes chlorosis in older leaves.
Hence, D. Nitrogen is necessary to synthesize chlorophyll in mature areas of older leaves is the correct option.
To know more about nitrogen deficiency here
https://brainly.com/question/30639048
#SPJ4
--The given question is incomplete, the complete question is
"Which answer best explains how nitrogen deficiency in plants causes chlorosis at the tips of older leaves? A) Nitrogen is a component of all enzymes, so new growth will stop if nitrogen is deficient. B) Nitrogen regulates proton pumps that supply energy to growing tissue at the tips of older leaves. C) Nitrogen is a component of chlorophyll, but it is mobile and is re-located from older leaves to growing parts. D) Nitrogen is necessary to synthesize chlorophyll in mature areas of older leaves."--
What might cause the mass of a product] to be more than the theoretical mass
Might cause the mass of a product to be more than the theoretical mass are impurities, incomplete reactions, and measurement errors.
There are several factors that could cause the mass of a product to be more than the theoretical mass:
1. Impurities: If there are impurities present in the reactants or the product, this could cause the mass of the product to be more than the theoretical mass.
2. Incomplete reactions: If the reaction is not allowed to go to completion, there may be unreacted reactants left in the product, which could increase the mass of the product.
3. Measurement errors: If there are errors in the measurement of the reactants or the product, this could cause the mass of the product to be more than the theoretical mass.
In conclusion, impurities, incomplete reactions, and measurement errors are all factors that could cause the mass of a product to be more than the theoretical mass.
Learn more about reactants at:
https://brainly.com/question/30639017
#SPJ11
Which of the following is NOT an element of set 18?
a. Helium
b. silicon
c. Neon
d. krypton
Silicon is not an element of set 18. The correct answer to this question is b.
An element is a substance that cannot be broken down into simpler substances through chemical reactions. Each element is identified by a unique atomic number, which represents the number of protons in its nucleus. The set of 18 elements includes helium, neon, and krypton, but not silicon.
Any one of the seven chemical elements that compose Group 18 (VIIIa) of the periodic table is referred to as a noble gas. Helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson are the constituent elements (Og).
To know more about periodic table here:
https://brainly.com/question/11155928#
#SPJ11
what is the ionization constant
The ionization constant, also known as the acid dissociation constant or Ka, is a measure of the strength of an acid in a solution.
Ionization constant is the equilibrium constant for the ionization reaction of an acid, and is defined as the product of the concentrations of the ions produced when the acid dissociates, divided by the concentration of the undissociated acid.
In mathematical terms, the ionization constant is represented as: Ka = [H+][A-]/[HA]
Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the undissociated acid.
The higher the ionization constant, the stronger the acid is, and the more it will dissociate in a solution. Conversely, a lower ionization constant indicates a weaker acid that will not dissociate as much.
It is important to note that the ionization constant is different from the ionization energy, which is the amount of energy required to remove an electron from an atom or molecule.
To know more about ionization constant here:
https://brainly.com/question/13794673#
#SPJ11
What is the molecular mass and molar mass of carbon monoxide ?
The molecular mass and molar mass of carbon monoxide are both 28.01 g/mol.
Molecular mass is the mass of one molecule of a substance, measured in atomic mass units (amu). Molar mass is the mass of one mole of a substance, measured in grams per mole (g/mol).
To find the molecular mass of carbon monoxide, we add the atomic mass of carbon (12.01 amu) to the atomic mass of oxygen (16.00 amu):
12.01 amu + 16.00 amu = 28.01 amu.
Since the molecular mass and molar mass are numerically equivalent, the molar mass of carbon monoxide is also 28.01 g/mol.
To know more about molecular mass here:
https://brainly.com/question/15880821#
#SPJ11
what is the ca3po42 molar mass?
The Ca₃(PO₄)₂ molar mass is 310 g/mol. The name of the compound Ca₃(PO₄)₂ is the calcium phosphate.
The chemical name of the compound with the formula of Ca₃(PO₄)₂ is the calcium phosphate. The calcium phosphate is the ionic compound that means the calcium phosphate is formed by the complete transfer of the electrons.
The molar mass of the calcium = 40 g/mol
The molar mass of the phosphorus = 31 g/mol
The molar mass of the oxygen = 16 g/mol
The molar mass of the Ca₃(PO₄)₂ = 3 (40) + 2 (31) + 16 (8)
The molar mass of the Ca₃(PO₄)₂ = 310 g/mol
To learn more about molar mass here
https://brainly.com/question/22997914
#SPJ4
Why is sand heterogeneous?
Sand is heterogeneous because it is made up of different-sized grains that do not have uniform properties.
Sand is a naturally occurring granular material that is made up of different-sized particles of rocks, minerals, and shells. These particles can vary in size, shape, and composition, resulting in a mixture of grains with different physical and chemical properties. Some grains may be round and smooth, while others may be sharp and angular.
They may also have different colors, densities, and chemical compositions. Due to this variation, sand cannot be considered a pure substance, and its properties will vary depending on the mixture of grains present. Therefore, sand is classified as a heterogeneous mixture.
To know more about the sand, here
brainly.com/question/3054494
#SPJ4
An unlabeled drug bottle was found in the medicine cabinet of Smith’s bathroom. A 100 g sample of the drug was analyzed and found to contain 64.94% C, 4.50 % H, 20.36% O, and 10.20% S. The molar mass of the compound was found to be 314.38 g/mol. It may be a drug prescribed for osteoarthritis. Coincidentally, Smith’s arthritis has become so intolerable in recent weeks that he’s had to rely on the aid of a crutch for mobility. Prolonged ingestion of this drug is thought to lead to a heart attack. Smith’s doctor, Franklin Finch, has a quiet reputation of prescribing dangerous drugs to “dispose of” unwanted patients. Lately, Smith has been gaining more recognition in the community due to his latest research on aromatic hydrocarbons. Could Finch’s jealousy by the cause of Tony Smith’s death?
Multiplying each subscript in the empirical formula by the scaling factor gives us the molecular formula: C₁₆H₁₄O₄S becomes C₁₅.8H₁₃.9O₃.9S.
What is drug?A drug is a substance that alters the way a living organism functions. Drugs can be used for medicinal, recreational, or experimental purposes. Medicinal drugs are used to prevent, cure, or treat diseases, disorders, and injuries. Recreational drugs are used for pleasure or to alter one's mental state. Experimental drugs are used in clinical trials or research studies to investigate their effects on the human body.
Here,
To determine the molecular formula of the compound, we can use the percent composition of each element and the molar mass.
First, we can find the mass of each element present in the 100 g sample:
Mass of C: 64.94 g
Mass of H: 4.50 g
Mass of O: 20.36 g
Mass of S: 10.20 g
Next, we can convert each mass to moles using the molar mass:
Moles of C: 64.94 g / 12.01 g/mol = 5.41 mol
Moles of H: 4.50 g / 1.01 g/mol = 4.46 mol
Moles of O: 20.36 g / 16.00 g/mol = 1.27 mol
Moles of S: 10.20 g / 32.06 g/mol = 0.32 mol
We can then divide each mole value by the smallest mole value to get a set of whole-number ratios:
C: 5.41 mol / 0.32 mol = 16.91
H: 4.46 mol / 0.32 mol = 13.94
O: 1.27 mol / 0.32 mol = 3.97
S: 0.32 mol / 0.32 mol = 1
Multiplying each ratio by the smallest whole number that makes all the ratios integers gives us the empirical formula:
C₁₆H₁₄O₄S
To find the molecular formula, we need to know the molar mass of the compound. The molar mass given in the problem is 314.38 g/mol. Dividing the molar mass by the empirical formula mass gives us the scaling factor:
Scaling factor = 314.38 g/mol / 318.34 g/mol = 0.987
To know more about drug,
https://brainly.com/question/1347938
#SPJ1
What is the answer? :)
(Please ignore the already selected answer)
The decaying leaves undergoing a chemical reaction to neutralize the pollutants. Therefore, the correct option is option A.
What is chemical pollutant?The introduction of dangerous substances is chemical pollution. Herbicides, herbicides, fertilizers, detergents, petroleum, industrial chemicals, as well as sewage are typical man-made contaminants that end up in the ocean. Further inland from coasts, a lot of ocean toxins are dumped into the ecosystem.
The movement of chemical pollutant in soil can be slowed by the presence of organic material, such as decayed leaves. The decaying leaves undergoing a chemical reaction to neutralize the pollutants.
Therefore, the correct option is option A.
To learn more about chemical pollutant, here:
https://brainly.com/question/15151619
#SPJ1
what is antidote for magnesium sulfate
The treatment for magnesium poisoning involves slowly injecting 10mL of calcium gluconate (2.2mmol of calcium in a 10mL vial; formerly known as 10% solution) into the vein over the course of 10 minutes.
What are the symptoms and treatment for magnesium sulfate toxicity?
Early symptoms of magnesium toxicity include nausea, feeling heated, flushing, somnolence, double vision, slurred speech, and weakness. The first sign of magnesium toxicity is typically the loss of patellar reflexes, which happens with serum magnesium levels of 9 mg/dl to 12 mg/dl.
What symptoms indicate toxicity from magnesium sulfate?
Keep an eye out for the warning signs and symptoms of magnesium sulfate toxicity, such as hypotension, areflexia (loss of DTRs), respiratory depression and arrest, oliguria, shortness of breath, chest pains, slurred speech, hypothermia, confusion, and circulatory collapse.
To know more about magnesium visit:
https://brainly.com/question/8732513
#SPJ1
what is the normal boiling point of toluene
The temperature is 110.6 °C. The normal "boiling point" of toluene is 110.6 °C.
A pure toluene's boiling point, 110.6° C (i.e. 231.1° F in Fahrenheit) is a colourless, flammable, insoluble in water, toxic liquid but soluble in all the common organic solvents.
And at higher altitudes, boiling point of the liquid decreases and lowers because the atmospheric pressure is lower and this depends on amount of impurities in liquids, along with the atmospheric pressure.
Toluene is a colorless, flammable liquid and sweet smelling with aromatic odor that derives from petroleum and coal tar. It is stated as aromatic hydrocarbon and the reason is "it has containing benzene ring", that causes the molecule to be extra and more stable than the other hydrocarbons.
To know more about toluene:
brainly.com/question/14032302
#SPJ4
What is the Lewis structure of NH2+?
The Lewis structure is shown in the image attached. Note that NH2+does not exist but NH2-
What is Lewis structure?
Lewis structure, also known as Lewis dot structure, is a representation of the valence electrons of an atom in a molecule. It shows the arrangement of atoms and their bonds in a molecule. In Lewis structures, electrons are represented as dots surrounding the atomic symbol and covalent bonds are represented as lines connecting the atomic symbols.
The goal of drawing a Lewis structure is to show the distribution of electrons around the atoms in a molecule in a way that satisfies the octet rule, which states that atoms tend to bond in such a way that they each have eight electrons in their valence shell.
Learn more about Lewis structure:https://brainly.com/question/20300458
#SPJ1
1. Which of the following best describes
visible light? A amount of shine B energy that we can see C a vibration
A amount of shine best describes visible light. Therefore, option A is correct.
What is visible light ?Light, also known as "visible light," refers to the visible region of the electromagnetic spectrum, or the range of wavelengths that cause humans to perceive brightness and color. It falls somewhere between UV and infrared radiation.
People think of the sun, light bulbs, candles, and fire when they think of light, but visible light comes from many sources and in many colors. Other visible light sources include television and computer screens, glow sticks, and fireworks.
Thus, option A is correct.
To learn more about the visible light, follow the link;
https://brainly.com/question/10709323
#SPJ9
Which energy band in the Electromagnetic Spectrum gets completely absorbed by Earth's atmosphere. Thus, a space telescope is needed to study this band of the Electromagnetic spectrum.
Group of answer choices
Infrared
Radio
Ultraviolet
X-ray
The energy band in the Electromagnetic Spectrum that gets completely absorbed by Earth's atmosphere is the X-ray band.
What is Electromagnetic Spectrum?The Electromagnetic Spectrum is the range of all types of electromagnetic radiation. Electromagnetic radiation includes all forms of energy that travel through space as a wave, characterized by their wavelength and frequency. This spectrum includes a wide range of radiation, from long-wavelength radio waves to short-wavelength gamma rays. The Electromagnetic Spectrum is typically divided into different regions, each with its own range of wavelengths and frequencies. These regions include radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Each of these regions has different properties and is used for different applications. For example, radio waves are used for communication, while X-rays are used for medical imaging and materials science. The Electromagnetic Spectrum is an important concept in physics and astronomy, as it helps us understand the properties of electromagnetic radiation and how it interacts with matter. The different regions of the spectrum also allow scientists to study different phenomena, from the study of stars and galaxies in the radio and infrared regions to the study of the atomic and subatomic world with X-rays and gamma rays.
Here,
X-rays have high energy and short wavelengths, which makes them useful for studying the properties of matter at the atomic and subatomic level. However, X-rays are absorbed by Earth's atmosphere and cannot penetrate to the surface, which means that a space telescope is needed to study this band of the Electromagnetic spectrum. The Chandra X-ray Observatory, for example, is a space telescope that was specifically designed to study X-rays from space.
To know more about Electromagnetic Spectrum,
https://brainly.com/question/9720145
#SPJ1