ayo!! listen to me this is an easy question :)

Apples are on sale at the local fruit stand at 4 lbs. for $2.60. Which equation can be used to find the cost, c, of n pounds of apples?
c = 4
c = .65n
c = 2.60n
c = 8n

The equation to find out how much money Johnny has saved is: Total money saved = 100 + 15W. Independent variable: Number of weeks (W) and Dependent variable: Total money saved.

We are given the following information:

Johnny has $100 in the bank initially.

He plans to deposit $15 per week.

To find out how much money Johnny has saved over time, we can use an equation that calculates the total money saved based on the number of weeks.

Let's define the variables: W represents the number of weeks.

Total money saved represents the amount of money Johnny has saved over time. The equation to calculate the total money saved is:

Total money saved = $100 + ($15 * Number of weeks)

In this equation, the $100 represents the initial amount Johnny had in the bank. The ($15 * Number of weeks) represents the total amount he has deposited over the number of weeks.

The independent variable is the "Number of weeks" because it can vary, and we can calculate the total money saved for different time periods by plugging in different values for this variable.

The dependent variable is the "Total money saved" because it depends on the number of weeks. The value of this variable changes based on the number of weeks Johnny has been saving.

By plugging in different values for the number of weeks (W), we can calculate the corresponding total money saved.

For example, if Johnny has been saving for 10 weeks, we can substitute W = 10 into the equation to find the total money saved over that time period.

Learn more about variable here:

https://brainly.com/question/29430246

#SPJ11

The mirror should be inclined at an angle of 35°

To determine the angle at which the mirror should be inclined, we need to use trigonometry. Let's first draw a diagram:

In the below diagram, A represents the customer's eyes, and B represents the customer's feet. The angle we need to find is θ.

We know that A = 140cm (the height of the customer's eyes off the floor) and B = 50cm (the distance from the customer to the mirror). We want to find θ, the angle at which the mirror should be inclined.

We can use the tangent function to find θ:

tan2θ = A/B
θ = 1/2 [tex]tan^{-1}[/tex] A/B
θ = 1/2 [tex]tan^{-1}[/tex] 140cm/50cm
θ = 35°

Therefore, the mirror should be inclined at an angle of approximately 35° so that a person standing 50cm from the mirror with eyes 140cm off the floor can see her feet.

Know more about Trigonometry here :

https://brainly.com/question/25618616

#SPJ11

The maximum number of barrels per day imported in september 2003 was 1.72 million

To find the year when oil imports were greatest, we need to find the maximum value of the function I(t) = -0.015t^2 + 0.1t + 1.4, where t is in years since the start of 2000.

The maximum value of a quadratic function occurs at the vertex, which has x-coordinate equal to -b/2a for a function in the form [tex]ax^2 + bx + c.[/tex]For this function, a = -0.015 and b = 0.1, so the x-coordinate of the vertex is:

x = -b/2a = -0.1 / (2*(-0.015)) = 3.33

Since t is in years since the start of 2000, the year when oil imports were greatest is 2003.33 (or approximately September 2003).

To find the number of barrels per day imported that year, we can simply plug in t = 3.33 into the function I(t):

[tex]I(3.33) = -0.015(3.33)^2 + 0.1(3.33) + 1.4[/tex]= 1.72 million barrels per day

Therefore, the maximum number of barrels per day imported was approximately 1.72 million, and this occurred in September 2003.

Learn more about problem related to oil imports

brainly.com/question/499716

#SPJ11

Answer: its 40 because its a whole number

Step-by-step explanation:

Mrs. Falkener has written a company report every 3 months for the last 6 years, resulting in a total of 24 reports. Among these reports, 2/3 of them show the company earning more money than it spends. Therefore, 1/3 of the reports, or 8 reports, show the company spending more money than it earns.

In 6 years, there are 12 quarters since there are 4 quarters in a year. Mrs. Falkener has written a company report every 3 months, which means there are 12 * 3 = 36 periods in total. However, since each report covers a 3-month period, the total number of reports is 36 / 3 = 12.

Given that 2/3 of the reports show the company earning more money than it spends, we can calculate the number of reports showing the company spending more money than it earns. Since 2/3 of the reports represent the earnings being greater, the remaining 1/3 represents the expenses being greater. Therefore, 1/3 of 12 reports is 12 * (1/3) = 4 reports.

In conclusion, among the 24 company reports written by Mrs. Falkener in the last 6 years, 2/3 of them, or 16 reports, show the company earning more money than it spends. The remaining 1/3, or 8 reports, show the company spending more money than it earns.

Learn more about  earning here :

https://brainly.com/question/28045589

#SPJ11

The singular value decomposition of the given matrices.

Singular value decomposition (SVD) is a factorization method used to decompose a matrix into three separate matrices: U, Σ, and V^T. The U matrix represents the left singular vectors, Σ is a diagonal matrix containing the singular values, and V^T represents the right singular vectors.

To find the singular value decomposition, we can apply the SVD algorithm to each of the given matrices. By performing SVD, we can analyze the structure and properties of the matrices, such as their rank, null space, and condition number. The decomposition can also be used for various applications, including dimensionality reduction, image compression, and solving linear equations.

Learn more about Singular value decomposition (SVD

brainly.com/question/30007171

#SPJ11

Answer: I know why its because

you see your acount on the right corner and you see how many crowns and points you have welll you need this all the way filled up the thing around your name like mine its almost full

Step-by-step explanation:

The answer to your question depends on the specific context and analysis being referred to. In statistical analysis, a coefficient is a measure of the strength and direction of the relationship between two variables. The term "statistically significant" refers to whether a result or relationship observed in a sample is likely to hold true in the larger population, based on the probability of obtaining such a result by chance.

If the coefficient for population is found to be statistically significant at a certain level, this means that the relationship between population and the outcome being studied is unlikely to have occurred by chance alone.

In your question, the possible answers suggest different levels of statistical significance, ranging from 1% to 49.5%. Generally, a standard level of significance is set at 5%, meaning that there is a 95% chance that the relationship observed in the sample is true for the population as a whole. If the coefficient for population is found to be statistically significant at the 5% level, this would suggest that the relationship is strong enough to be confident that it holds true in the larger population.

However, if the coefficient is only statistically significant at a higher level (such as 1%), this suggests an even stronger relationship between population and the outcome being studied. On the other hand, if the coefficient is not statistically significant at any level (i.e. it is "insignificant"), this suggests that there is not enough evidence to support a relationship between population and the outcome, or that any relationship that does exist is weak and likely due to chance.

Without more context or information about the specific analysis being conducted, it is difficult to determine which of these answers is correct. However, if a coefficient for population is found to be statistically significant, it is important to provide an explanation of what this means in the context of the research question and the data being analyzed.  

To know more about statistically visit:

https://brainly.com/question/30389845

#SPJ11

To find the derivative of f(t) = t sin(t), we use the product rule of differentiation. Let u = t and v = sin(t), then f'(t) = u'v + uv'. Using this, we get:

f'(t) = (1)(sin(t)) + (t)(cos(t)) = sin(t) + tcos(t)

To find the derivative of g(t) = 1/t, we use the power rule of differentiation. Let u = 1 and v = t^-1, then g'(t) = -u/v^2. Using this, we get:

g'(t) = -1/t^2


To differentiate f(t) and g(t), we used the product rule and power rule respectively. The product rule is used to differentiate a product of two functions, while the power rule is used to differentiate a function with a power of t.

In f(t), we have two functions multiplied together - t and sin(t). Using the product rule, we differentiate each function and add them together. This gives us f'(t) = sin(t) + tcos(t).

In g(t), we have a function with a power of -1/t. Using the power rule, we bring the exponent down and subtract 1 from it. This gives us g'(t) = -1/t^2.


we have found the derivatives of f(t) and g(t) to be f'(t) = sin(t) + tcos(t) and g'(t) = -1/t^2 respectively.

To learn more about derivatives visit:

https://brainly.com/question/30365299

#SPJ11

The average value of the function f(x) = 6x over the interval [0, 9] is 27.

To find the average value of a function over a given interval, you need to take the definite integral of the function over that interval, and divide by the length of the interval. In this case, the function is f(x) = 6x, and the interval is [0, 9].

So first, we need to find the definite integral of 6x over [0, 9]:

∫[0,9] 6x dx = 3x^2 |[0,9] = 243

Next, we need to find the length of the interval, which is simply 9 - 0 = 9.

Finally, we divide the definite integral by the length of the interval:

Average value of f(x) = (1/9) * 243 = 27

So the average value of the function f(x) = 6x over the interval [0, 9] is 27.

To know more about functions refer here :

https://brainly.com/question/13956546#

#SPJ11

The sum for the telescoping series is given by the limit of Sn as n approaches infinity:

S = lim(n→∞) Sn = lim(n→∞) 2 + 5/2 - 1/(n+1) = 9/2.

First, let's find Sn:

Sn = 3C0/(n+1)(n+2) + 3C1/(n)(n+1) + ... + 3Cn/(1)(2)

Notice that each term has a denominator in the form (k)(k+1), which suggests we can use partial fractions to simplify:

3Ck/(k)(k+1) = A/(k) + B/(k+1)

Multiplying both sides by (k)(k+1), we get:

3Ck = A(k+1) + B(k)

Setting k=0, we get:

3C0 = A(1) + B(0)

A = 3

Setting k=1, we get:

3C1 = A(2) + B(1)

B = -1

Therefore,

3Ck/(k)(k+1) = 3/k - 1/(k+1)

So, we can write the sum as:

Sn = 3/1 - 1/2 + 3/2 - 1/3 + ... + 3/n - 1/(n+1)

Simplifying,

Sn = 2 + 5/2 - 1/(n+1)

Now, we can find the different partial sums:

S1 = 2 + 5/2 - 1/2 = 4

S2 = 2 + 5/2 - 1/2 + 3/6 = 17/6

S3 = 2 + 5/2 - 1/2 + 3/6 - 1/12 = 7/4

S4 = 2 + 5/2 - 1/2 + 3/6 - 1/12 + 3/20 = 47/20

Finally, the sum for the telescoping series is given by the limit of Sn as n approaches infinity:

S = lim(n→∞) Sn = lim(n→∞) 2 + 5/2 - 1/(n+1) = 9/2.

Learn more about telescoping series here:

https://brainly.com/question/14523424

#SPJ11

If Joe’s marginal cost was $40 per additional hour, it would make sense for him to keep the restaurant open longer for a maximum of 2 hours because after this point the marginal cost exceeds the marginal benefit.

Explanation:Marginal cost is the additional cost of producing an extra unit of output while marginal benefit is the additional benefit gained from producing an extra unit of output.

To maximize profits, businesses should continue producing units of output until the marginal cost equals the marginal benefit.The question states that Joe’s marginal cost is $40 per additional hour. This implies that for every additional hour the restaurant is kept open, it would cost Joe $40. In order to decide if it is economically beneficial to keep the restaurant open longer, Joe would need to compare the marginal cost with the marginal benefit.

If Joe’s marginal benefit is higher than his marginal cost, then it would make sense for him to keep the restaurant open longer. However, if his marginal cost is higher than his marginal benefit, then it would not be economical to keep the restaurant open longer.

The opportunity cost of an economic decision is the next best alternative foregone. In this case, Joe would need to consider what he would have gained or lost if he did not keep the restaurant open for an additional hour.

To know more about profits, visit

https://brainly.com/question/29662354

#SPJ11

The equation for her total cost y would be:

y = 45x

Let's use x to represent the number of months and y to represent the total cost.

For George from Acme TV:

The set-up fee is a one-time payment of [tex]$50[/tex], so it does not depend on the number of months.

For each month, he pays [tex]$35[/tex].

The equation for his total cost y would be:

y = 35x + 50

For Gwen from Metro TV:

There is no set-up fee, so her cost only depends on the number of months.

For each month, she pays [tex]$45[/tex].

The equation for her total cost y would be:

y = 45x

It's worth noting that these equations assume that the monthly fees remain constant over time, which may not necessarily be the case in real life.

Additionally, these equations do not take into account any potential taxes or additional fees that may be added to the cost of the memberships.

For similar questions on equation

https://brainly.com/question/17145398

#SPJ11

The given graph image in the attached file does not represent a translation.

Translation in transformation is defined as  the process of moving or transforming an object from one place to another without changing the shape, angle or size. This transformation can be gotten by applying a set of rules or functions to the coordinates of each point on the graph.

The most common types of graph transformations are vertical and horizontal transformations. Vertical translation moves the graph up and down along the Y axis, and horizontal translation moves the graph left and right along the X axis.

From the given attached image, we can see that both lines seem to be at different angles and we recall that when carrying out translation, we don't change length or angle and as such the figure does not represent a translation.

Thus, we can conclude that the images do not represent a translation.

Read more about Transformation Translation at: https://brainly.com/question/4289712

#SPJ4

To find the area between two z-scores on a calculator, we use the command "normalcdf" on most scientific calculators.

This command calculates the area under the normal distribution curve between two specified z-scores. We need to input the two z-scores and the mean and standard deviation of the normal distribution, which can be obtained from the problem statement or by calculating them from the given data.

Another command that is used in conjunction with "normalcdf" is "invNorm". This command can be used to find the z-score corresponding to a given area under the normal distribution curve. It is used when we are given the area and we need to find the corresponding z-score.

Together, these two commands are useful for solving problems that involve normal distributions, such as finding probabilities, finding critical values, or constructing confidence intervals. It is important to understand how to use these commands properly in order to perform accurate and efficient calculations.

To know more about scientific calculators refer to-

https://brainly.com/question/29020266

#SPJ11

Pool A has a diameter of approximately 88 feet, and Pool B has a diameter of approximately 27.02 meters. The circumference of Pool A is greater than the circumference of Pool B by approximately 77.22 meters.

In summary, Pool A has a diameter of approximately 88 feet, while Pool B has a diameter of approximately 27.02 meters. The circumference of Pool A is greater than the circumference of Pool B by approximately 77.22 meters.
The diameter of a circle is twice the radius. Since the radius of Pool A is given as 44 feet, the diameter of Pool A would be (2 * 44) = 88 feet.
To compare Pool A and Pool B in the same unit, we need to convert the diameter of Pool B from meters to feet. Given that 1 meter is equal to 3.281 feet, the diameter of Pool B in feet would be (27.02 * 3.281) = 88.63 feet (rounded to the nearest hundredth).
The circumference of a circle can be calculated using the formula C = 2πr, where r is the radius. For Pool A, the circumference would be (2 * 3.14159 * 44) = 276.46 feet (rounded to the nearest hundredth).
For Pool B, the circumference would be (2 * 3.14159 * 88.63) = 556.80 feet (rounded to the nearest hundredth).
Comparing the circumferences, we find that the circumference of Pool A is greater than the circumference of Pool B by approximately (556.80 - 276.46) = 280.34 feet (rounded to the nearest hundredth), which is equivalent to approximately 85.34 meters.
Therefore, the circumference of Pool A is greater than the circumference of Pool B by approximately 77.22 meters.

Learn more about circumference here
https://brainly.com/question/28757341



#SPJ11

The value of f(2π) is:π + 2√(2π).

The given differentiable function is: f′(x) = sin²(x) + x^(-1/2)

Given that: f(0) = 5.420

To find:f(2π)

The function is differentiable.

Therefore, f(x) must be continuous.

Let's first integrate the derivative of the function.

∫f′(x) dx = ∫sin²(x) + x^(-1/2) dx

∫sin²(x) dx = x/2 - (sin x cos x)/2 = (x - sin x cos x)/2

∫x^(-1/2) dx = 2x^(1/2) = 2√x

The integral is equal to: f(x) = (x - sin x cos x)/2 + 2√x

Now we need to substitute x with 2π:

f(2π) = [(2π - sin(2π) cos(2π))/2] + 2√(2π)

f(2π) = [(2π - 0 x (-1))/2] + 2√(2π)

f(2π) = [π + 2√(2π)]

Therefore, the value of f(2π) is:π + 2√(2π).

To learn about the integral here:

https://brainly.com/question/30094386

#SPJ11

The total number of ways to distribute a total inventory of twenty batteries among the six different types is 10 x 120,332,228 = 1,203,322,280.

To determine how many ways a total inventory of twenty batteries can be distributed among the six different types, we need to use the concept of combinations. We know that there are seven different types of batteries, but we are given that there are only ten a7b batteries and at least twenty of each of the other types. This means that the maximum number of batteries that can be used from the other six types is 20 x 6 = 120.

So, to distribute a total of twenty batteries among the six types, we need to consider the number of a7b batteries and the number of batteries from the other six types. Since we are given that there are only ten a7b batteries, we can distribute them in 10 different ways among the six types.

For the other six types, we have a maximum of 120 batteries to use. To distribute 20 batteries among these six types, we can use the formula for combinations, which is nCr = n! / r!(n-r)!. In this case, we have 120 batteries to choose from, and we want to choose 20 batteries, so the formula becomes 120C20 = 120! / 20!(120-20)! = 120,332,228 ways.

Therefore, the total number of ways to distribute a total inventory of twenty batteries among the six different types is 10 x 120,332,228 = 1,203,322,280.

To know more about number of ways, refer to the link below:

https://brainly.com/question/30894993#

#SPJ11

Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.

To find out the number of pennies in a bag that weighs 711.55 grams, we need to divide the total weight by the weight of each penny. We know that each penny weighs 3.5 grams,

therefore: Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)

Therefore, there are about 203 pennies in the bag. To summarize the answer in a long answer format, we can write: We can find the number of pennies in the bag by dividing the total weight of the bag by the weight of each penny. Given that each penny weighs 3.5 grams, we can find out the number of pennies by dividing 711.55 grams by 3.5 grams.

Therefore, Number of pennies = Total weight of bag / Weight of one penny= 711.55 / 3.5 = 203.015 ≈ 203 (rounded to the nearest whole number)

Therefore, there are about 203 pennies in the bag. This is a 90-word long answer. If you need to provide a 250-word answer, you can expand the explanation by discussing the weight and denomination of pennies, their history, and their use.

To know more about number visit:

https://brainly.com/question/3589540

#SPJ11

The interval on which f(x) is increasing is (-3, 3).

To determine on what interval the function f(x) = x 0 (9 − t2) et2 dt is increasing, we need to find the derivative of f(x) and then examine its sign.

We can use the Leibniz rule to find the derivative of f(x):

f'(x) = (d/dx) x 0 (9 − t2) et2 dt = (9 − x2) ex2

Now we need to determine the sign of f'(x) on different intervals. Notice that the factor (9 - x^2) is always positive for x in the interval [-3, 3], and ex^2 is always positive for any x. Therefore, the sign of f'(x) is determined by the sign of (9 - x^2)ex^2.

If x < -3 or x > 3, then (9 - x^2) is negative, and so is f'(x). Therefore, f(x) is decreasing on (-∞, -3) and (3, ∞).

If -3 < x < 3, then (9 - x^2) is positive, and so is f'(x). Therefore, f(x) is increasing on (-3, 3).

Therefore, the interval on which f(x) is increasing is (-3, 3).

Learn more about interval here:

https://brainly.com/question/13708942

#SPJ11

The answer is .  this result is not possible since the number of people cannot be negative. There must be an error in the initial data provided.

Let x be the number of people who paid GH¢20 each.

Then, the number of people who paid GH¢30 each is 350 − x.

The total amount collected from those who paid GH¢20 each is 20x, while the total amount collected from those who paid GH¢30 each is 30(350 − x).

The sum of these two amounts is GH¢ 800, so we can write an equation:

20x + 30(350 − x) = 800

Simplify the left side of the equation:

20x + 10500 − 30x = 800

Simplify the equation:−10x = −9700x

= 970

Thus, the number of people who paid GH¢20 each is x = 970, and the number of people who paid GH¢30 each is

350 − x = 350 − 970

= −620.

However, this result is not possible since the number of people cannot be negative.

Therefore, there must be an error in the initial data provided.

To know more about Equation visit:

https://brainly.com/question/29174899

#SPJ11

The function f(x,y) = 6 + x ln(xy-7) is differentiable at the point (4,2).

We can find the partial derivative fx(x,y) by applying the chain rule of differentiation to the function f(x,y) = 6 + x ln(xy-7), as follows:

fx(x,y) = ln(xy-7) + x(1/(xy-7))(ydx/dx)

= ln(xy-7) + 1/(y-7)*x

where dx/dx = 1 is the derivative of x with respect to itself. Similarly, the partial derivative fy(x,y) can be obtained as:

fy(x,y) = x(1/(xy-7))(xdy/dy)

= x/(xy-7)

where dy/dy = 1 is the derivative of y with respect to itself.

To show that fx and fy are continuous at the point (4,2), we need to evaluate them at that point and show that the resulting values are finite. Substituting x = 4 and y = 2 into the equations for fx and fy, we get:

fx(4,2) = ln(1) + 1/(2-7)4 = -4/5

fy(4,2) = 4/(42-7) = -4/3

Since both fx(4,2) and fy(4,2) are finite, we can conclude that the partial derivatives of f exist and are continuous at (4,2).

To know more about derivative here

https://brainly.com/question/30074964

#SPJ4

Complete Question:

Explain why the function is differentiable at the given point.

f(x, y) = 6 + x ln(xy − 7), (4, 2)

The partial derivatives are fx(x, y) =

and fy(x, y) =

The sets of data that  show the correct median is given as follows.

Correct Median:

9, 3, 6, 1, 4 (median = 4)

1, 6, 9 (median = 6)

​4. 9, 11, 13, 16, 20 (median = 12)

Incorrect Median:

2. 7.9, 11, 14, 76 (median = 76)

43, 46, 48, 52 (median = 48)

3, 10, 7 (median = 10)

The median is the value that separates the upper and lower halves of a data sample, population, or probability distribution in statistics and probability theory. It is sometimes referred to as "the middle" value in a data collection.

Arrange the data points from smallest to greatest to get the median. If the number of data points is odd, the median is the data point in the middle of the list. If the number of data points in the list is even, the median is the average of the two middle data points.

Learn more about median at:

https://brainly.com/question/26151333

#SPJ1

Full Question:

Which sets of data show the correct media? Sort the tiles into their proper categories. 9, 3, 6, 1, 4 (median = 4) Correct Median Incorrect Median 4. 9, 11, 13, 16, 20 (median = 12) 1, 6, 9 (median = 6) 2. 7.9, 11, 14, 76 (median = 76) 43, 46, 48, 52 (median = 48) 3, 10, 7 (median = 10)​

To find the sum of the telescoping series 1 - 1/2, we need to calculate the first few terms of the series. The series is formed by subtracting consecutive terms, leading to cancellation of most terms, resulting in a simplified expression for the sum.

The given telescoping series is 1 - 1/2. To find the sum, let's calculate the first few terms.

When we plug in n = 3 into the series, we get: 1 - 1/2 + 1/3 - 1/4 + 1/5 - 1/6. Notice that many terms in the series cancel each other out. For example, the positive 1/3 cancels out with the negative 1/3, and the positive 1/5 cancels out with the negative 1/5. This cancellation continues for all terms except the first and last terms.

Therefore, after canceling out terms, the simplified expression for the sum of the telescoping series becomes: 1 - 1/2 + 1/5 - 1/6.

To find the actual sum, we can evaluate this expression. Adding the terms together, we get: 1 - 1/2 + 1/5 - 1/6 = 3/10.

Hence, the sum of the telescoping series 1 - 1/2 is 3/10.

Learn more about positive here: https://brainly.com/question/13165973

#SPJ11

Both conditions of the alternating series test are satisfied, so the series ∑ (-1)^n a_n converges.

To apply the alternating series test, we need to verify the following two conditions:

The sequence {a_n} = 1/(n^2 - 5) is positive, decreasing, and approaches 0 as n approaches infinity.

The series ∑ (-1)^n a_n = ∑ (-1)^n/(n^2 - 5) converges.

To check the first condition, we can take the derivative of a_n:

a'_n = -2n/(n^2 - 5)^2

Since n ≥ 3, we have n^2 - 5 ≥ 4, so (n^2 - 5)^2 ≥ 16. This implies that a'_n ≤ 0 for n ≥ 3. Therefore, the sequence {a_n} is decreasing.

To check that the sequence approaches 0, we can use the limit comparison test with the convergent p-series ∑ 1/n^2:

lim n→∞ a_n/(1/n^2) = lim n→∞ n^2/(n^2 - 5) = 1

Since the limit is finite and positive, we conclude that {a_n} approaches 0 as n approaches infinity.

Thus, both conditions of the alternating series test are satisfied, so the series ∑ (-1)^n a_n converges.

Learn more about alternating series here:

https://brainly.com/question/16969349

#SPJ11

Answer:

C

Step-by-step explanation:

the sum of the interior angles of a polygon is

sum = 180° (n - 2) ← n is the number of sides

a pentagon has 5 sides , that is n = 5

sum = 180° × (5 - 2) = 180° × 3 = 540°

since the 5 angles are congruent then divide the sum by 5 , that is

∠ F = 540° ÷ 5 = 108°

Step-by-step explanation:

Formula of calculating total angles with n side (Polygon) : (n-2) . 180°

total pentagon angles :

= (5 - 2) . 180

= 3 . 180

= 540°

all of the angle is congruent, then :

m<F = 540/5

m<F = 108° (C)

Subject : Mathematics

Level : JHS

Chapter : Geometry

Triggering the secretion of vasopressin is not a mechanism by which angiotensin II elevates ECF volume.

Angiotensin II is a hormone that plays a crucial role in regulating blood pressure and fluid balance in the body. It is produced by the renin-angiotensin-aldosterone system (RAAS) in response to low blood pressure or decreased blood flow to the kidneys.

When released, angiotensin II acts on various targets to increase blood pressure and restore fluid balance. One of its effects is to stimulate the secretion of aldosterone from the adrenal glands, which promotes salt and water retention in the kidneys.

This, in turn, increases extracellular fluid (ECF) volume. Additionally, angiotensin II can also stimulate thirst, which encourages the intake of fluids, further increasing ECF volume. However, angiotensin II does not directly cause the release of vasopressin, which also promotes water retention.

To learn more about : volume

https://brainly.com/question/463363

#SPJ11

The value of k that divides the solid into two solids of equal volume is (A) 4.

To find the value of k that divides the solid into two solids of equal volume, we need to determine the intersection points of the curves y = 3√x and x = 8.

Setting the equations equal to each other, we have:

3√x = 8

Squaring both sides, we get:

9x = 64

Solving for x, we find:

x = 64/9

This intersection point determines the value of k, as x = k. Therefore, k = 64/9, which is approximately 7.111.

Comparing the given answer choices, the closest option to 7.111 is (A) 4. Thus, the correct value of k is 4.

The line x = 4 divides the solid into two equal-volume parts.

Learn more about geometric solids

brainly.com/question/29072650

#SPJ11

The only point where the tangent line is vertical is (0, 0)..

To find the points on the curve where the tangent line is horizontal or vertical, we need to find where the slope of the tangent line is zero (for a horizontal tangent line) or undefined (for a vertical tangent line). The slope of the tangent line is given by the derivative of y with respect to x, dy/dx:

dy/dx = (dy/dt)/(dx/dt) = (3t^2 - 6t)/(3t^2 - 3)

Setting the numerator equal to zero, we get:

3t^2 - 6t = 0

Factorizing, we get:

3t(t - 2) = 0

So the critical points are t = 0 and t = 2.

At t = 0, we have x = 0 and y = 0, so the point is (0, 0).

At t = 2, we have x = 2 and y = -8, so the point is (2, -8).

To determine if the tangent line is vertical or horizontal at each point, we need to look at the derivative dx/dt:

dx/dt = 3t^2 - 3

At t = 0, dx/dt = -3, which means the tangent line is vertical.

At t = 2, dx/dt = 9, which means the tangent line is not vertical.

To find out if the tangent line is horizontal at t = 2, we can look at the derivative of dy/dt:

dy/dt = 9t^2 - 6t

At t = 2, dy/dt = 24, which means the tangent line is not horizontal.

Therefore, the only point where the tangent line is vertical is (0, 0).

Learn more about tangent here

https://brainly.com/question/30385886

#SPJ11