In bromobenzene, the bromine atom is an electron-withdrawing group that deactivates the ring towards electrophilic substitution reactions. However, since the bromine atom is ortho-para directing, it directs incoming electrophiles to the ortho and para positions relative to itself.
Therefore, electrophilic aromatic substitution can occur at either the ortho or para positions in bromobenzene, and the meta position is less favored due to the deactivating nature of the bromine atom.
The reaction could be summarized as follows:
+ E+ + HX
| |
Ar-Br + E+ → Ar-E + HBr
| |
+ E+ + HX
where Ar represents the aromatic ring, Br represents the bromine atom, E+ represents the electrophile, and HX represents the acid catalyst.
learn more about electrophilic here:
https://brainly.com/question/29454942
#SPJ4
How many Lewis dots are in lithium?
There is one Lewis dot in lithium, representing the one valence electron in the outermost shell of the atom.
Lithium is a compound component with nuclear number 3 and image Li. In the Lewis speck design of lithium, the image Li is encircled by a solitary dab, which addresses the one valence electron of the lithium iota. This electron is situated in the peripheral shell of the particle, otherwise called the valence shell, which is the shell that takes part in substance holding. The Lewis dab design of lithium demonstrates that there is just a single valence electron in the iota. The peripheral shell of lithium can oblige up to eight electrons, however lithium will in general lose its valence electron to shape a steady cation with a positive charge of +1.
To learn more about Lewis dots, refer:
https://brainly.com/question/15504917
#SPJ4
What do you mean by the law of mass action?
The law of mass action is a chemical principle that states that the rate of a chemical reaction is directly proportional to the product of the concentrations of the reactants.
This means that the more reactants you have, the faster the reaction will proceed.
The law of mass action can be expressed mathematically as:
rate = k[A][B]
where k is the rate constant, [A] and [B] are the concentrations of the reactants, and the rate is the speed at which the reaction proceeds.
The law of mass action is important in understanding how chemical reactions work and how to control them. By manipulating the concentrations of the reactants, we can control the rate of the reaction and therefore control the outcome of the reaction.
In summary, the law of mass action is a fundamental principle in chemistry that describes how the rate of a chemical reaction is affected by the concentrations of the reactants.
To know more about law of mass action here:
https://brainly.com/question/951024#
#SPJ11
How many p-orbitals are occupied in a K atom?
The number of the p-orbitals are occupied in a K atom is six p orbitals.
Potassium belongs to an alkali metal with the atomic number is 19 and the atomic mass of 39. The potassium is placed in the first group and the fourth period. The electronic configuration of the potassium is as :
Electronic configuration of potassium = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹
The region or the space around the nucleus in which the probability of the finding of the electron is called as the orbitals. From the electronic configuration, it is clear that 2p and 3p sublevels are the entirely occupied because the each of them has the six electrons.
To learn more about orbital here
https://brainly.com/question/30835065
#SPJ4
What Compound is Cs?
The name of the compound CS is the Carbon monosulfide.
Carbon monosulfide is the chemical compound with the formula of CS. This molecule is resembles with the carbon monoxide with the triple bond between the carbon and the sulfur. The molecule is not the intrinsically unstable, but it will tends to the polymerize. The carbon belong to the group 14 in the periodic table. The carbon is the non metal element. The sulfur also the non metal element in the periodic table.
The carbon monosulfide is unstable as the solid or the liquid, but it is observed as the gas both in the laboratory or in the interstellar medium.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
This question is incomplete, the complete question is :
What is the name of the compound CS ?
what are the 4 parts of natural selection? please keep it short and simple
Answer:
Variation, Inheritance, Selection, Time and adaptation.
Explanation:
Variation : Some variation occur in the off spring in appearance and behavior.
Inheritance : These variation are consistently passed on from parent to offspring of next generation to become genetic trait of the species.
Selection : Differential survival and reproduction of these species.
Time and adaptation : These variations/ traits become common in the population. The result is a population that is better suited--better adapted--to some aspect of the environment than it was before.
Example : Legs once used for walking are modified for use as wings or flippers. Scales used for protection change colors to serve as camouflage.
Hope it helps..
What is the frequency of light with a wavelength of 300nm?
The frequency of the light with a wavelength of the 300nm is 1 × 10¹⁵ Hz.
The wavelength of the light = 300 nm = 300 × 10⁻⁹ m
The frequency of the light can be calculated by the expression is as :
Frequency = speed of the light / wavelength
Where
The speed of the light = 3 × 10⁸ m/s
The wavelength of the light = 300 × 10⁻⁹ m
Frequency = speed of the light / wavelength
Frequency = 3 × 10⁸ m/s / 300 × 10⁻⁹ m
Frequency = 0.01 × 10¹⁷ Hz
Frequency = 1 × 10¹⁵ Hz
To learn more about wavelength here
https://brainly.com/question/13109209
#SPJ4
which patient would benefit from ecg monitoring due to an electrolyte imbalance?
a. Hypokalemia
b. Hypocalcemia
c. Hypomagnesemia
Answer:
Patients with electrolyte imbalances, including hypokalemia, hypocalcemia, and hypomagnesemia, can potentially benefit from ECG monitoring. However, hypokalemia is the most common electrolyte imbalance associated with ECG changes and is considered the most important electrolyte abnormality to monitor with ECG.
Hypokalemia, which is a low level of potassium in the blood, can lead to ECG changes such as ST-segment depression, T-wave flattening or inversion, and the appearance of U-waves. These changes may be difficult to detect without ECG monitoring, but they can be life-threatening, as they can lead to cardiac arrhythmias.
While hypocalcemia and hypomagnesemia can also cause ECG changes, they are generally less likely to result in arrhythmias than hypokalemia. ECG monitoring may still be recommended for patients with hypocalcemia or hypomagnesemia if they have symptoms or other risk factors for arrhythmias. However, hypokalemia is the electrolyte imbalance that most commonly requires ECG monitoring due to the risk of arrhythmias.
For more questions on ECG -
brainly.com/question/7172728
#SPJ4
How many resonance structures can O3 make?
O3 is called as Ozone. There are two resonance structure in O3 that contribute equally to the overall hybrid structure of the molecule.
Resonance structures can be drawn in different ways. In resonance structures, one can only change the location of bonds and electron pairs and not the amount or type of atoms. Ozone is an inorganic molecule with the formula O₃. Ozone is a pale blue gas with a distinctively pungent smell. It is an allotrope of oxygen that is much less stable than the diatomic allotrope O₂. That breaks down in the lower atmosphere to O₂. It is used in many industries. Ozone is used for purifying air and drinking water in industrial waste treatment, oils, bleaching and waxes and to make other chemicals. Two resonance structures can be drawn for ozone. The location of the double bond changes in the structure. Both the resonance structures of ozone are stable.
To learn more about Resonance structure please visit:
https://brainly.com/question/419650
#SPJ4
A tank of compressed CO2 has a pressure of 851 psi and a volume of 0.150 L. What is the pressure in atmospheres, when the final volume is 2.84 L?
A tank of compressed CO2 has a pressure of 851 psi and a volume of 0.150 L. The pressure in atmospheres, when the final volume is 2.84 L is 44.94psi.
What is pressure ?The term pressure is defined as the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Gauge pressure is the pressure relative to the ambient pressure. Different units are used to express pressure.
Given:
P1 = 851
V1 = 0.150 L
P2 = ?
V2 = 2.84 L
P1V1 = P2V2
P2 = P1V1 / V2
= 851 × 0.150 / 2.84
P2 = 44.94
Thus, the pressure in atmospheres, when the final volume is 2.84 L is 44.94psi.
To learn more about the pressure, follow the link;
https://brainly.com/question/12971272
#SPJ9
What is dinitrogen heptoxide formula?
The formula of the compound dinitrogen heptoxide is N₂O₅.
One of the binary nitrogen oxides is the substance Dinitrogen heptoxide.
A compound creates a new product by combining one or more additional ingredients. The mass ratio required to produce that product is equivalent to the combination of two substances or components. It is tightly connected, and they are equivalent in every manner to create a combination.
Dinitrogen heptoxide has the chemical formula N₂O₅.
This molecule has two nitrogen atoms and five oxygen atoms, as can be seen, and its name, Dinitrogen heptoxide, must reflect this
To know more about dinitrogen oxides, visit,
https://brainly.com/question/21479339
#SPJ4
Is carbon dioxide a pure substance True or false?
The given statement, "Carbon dioxide is not a pure substance" is false because it is a compound made up of two different elements, carbon and oxygen.
A pure substance is a material that consists of only one type of atom, molecule, or ion. Carbon dioxide is a chemical compound that contains one carbon atom and two oxygen atoms. Therefore, it is not a pure substance because it is made up of multiple types of atoms.
However, CO₂ can exist in pure form as a gas, liquid, or solid under certain conditions of temperature and pressure. This distinction is important in many areas of science and engineering, such as thermodynamics, materials science, and environmental science, where the properties of substances and their interactions are studied and applied.
To know more about the carbon dioxide, here
brainly.com/question/3049557
#SPJ4
If a 1.0 L canister holds 2.0 moles of gas, and the temperature of the gas is 500. C, what is the pressure inside the container in atm
The pressure of the gas inside the canister can be determined using the ideal gas equation. The pressure inside the canister is 126.7 atm.
What is ideal gas equation ?Ideal gas equations states the relation between volume, pressure, temperature and number of moles of gas as written below:
PV = nRT.
Where R is the universal gas constant equal to 0.082 L atm/K mol.
Given the volume of the tank V = 1 L
number of moles n = 2 moles
temperature = 500 ° C = 773 k
Then pressure P = nRT/V.
Pressure of gas = 2 moles ×773 K× 0.082 L atm/K mol /(1 L)
P = 126 atm.
Therefore, the pressure of the gas in the canister is 126 atm.
Find more on ideal gases:
brainly.com/question/30247106
#SPJ9
What is the correct name for Dioxygen difluoride?
The correct name for the Dioxygen difluoride is the Fluorine dioxide. The chemical formula is O₂F₂.
The Fluorine dioxide is the compound of the fluorine and the oxygen with the molecular formula of the O₂F₂. It can exist as the orange colored solid which will melts into the red liquid at the temperature of the −163 °C.
The oxides of the fluorine is highly toxic by the inhalation. The Corrosive to the skin and the eyes. It Can also explode on the contact with the water. It will decomposes to the toxic gaseous fluorine if it will heated to the high temperature.
To learn more about fluorine here
https://brainly.com/question/1940697
#SPJ4
Which of the following is NOT a possible pair of quantum numbers?
Multiple Choice:
2p
2d
4p
4f
The 2d orbital shell where n = 2 , has not a possible pair of quantum numbers. So, correct choice is option (b).
Quantum numbers specify the properties of atomic orbitals and the electrons in those orbitals. Each electron in an atom is described by a set of four numbers:
Principal quantum number (n)Angular momentum quantum number (l)Magnetic quantum number (ml)Spin quantum number (ms)The spin quantum number indicates the two possible orientations of the electron's spin. The value of the spin quantum number can never be zero because electrons always have either positive or negative spin. The rules for quantum numbers are:
'n' can be any positive non-zero integral value.'l' can be zero or any positive integer but not greater than (n-1). l = 0, 1, 2, 3, 4, ….(n-1) 'mₗ', the values correspond to Eq. -l, +1, +2, +3, +l'mₛ', can be +1/2 or -1/2.Now check the options for 2p ; n = 2, l = 1, mₗ = -1,0,1, this set of quantum numbers is possible.
For 4p, n = 4, l = 1, mₗ = -1, 0, 1. So it's a possible orbital.
For 2d, n = 2, l = 2 (for d orbital), but according to the rule, the value of l cannot equal n, so a 2d orbital is not possible.
For 4f, n = 4, l = 3, mₗ = -3,-2,-1,0,1,2,3. So it is possible. So, a 2d orbital is not possible.
For more information about quantum numbers, refer:
https://brainly.com/question/24095340
#SPJ4
is ICl5 Lewis structure polar or nonpolar?
The ICl5 Lewis structure is polar.
To determine the polarity of a molecule, we must first look at its Lewis structure. In the case of ICl5, the Lewis structure has iodine (I) in the center with five chlorine (Cl) atoms bonded to it. Each chlorine atom has three lone pairs of electrons, while the iodine atom has one lone pair of electrons.
The electronegativity difference between iodine and chlorine is relatively small, but the molecule has a distorted octahedral shape with the lone pair of electrons on the iodine atom causing a slight asymmetry. This asymmetry creates a net dipole moment, making the molecule polar.
The ICl5 Lewis structure is polar due to its asymmetrical shape and the presence of a net dipole moment.
To know more about polarity here:
https://brainly.com/question/30002497#
#SPJ11
what is nf3 compound name ?
The compound name for NF3 is nitrogen trifluoride.
NF3 is a compound that is commonly known as nitrogen trifluoride, is made up of one nitrogen atom and three fluorine atoms.
It is used in a variety of industrial processes, but it is also a potent greenhouse gas that contributes to global warming.
It is a colorless, odorless, and nonflammable gas that is used in the production of semiconductors, flat panel displays, and solar cells. It is also used as an etchant in the production of microelectronic devices.
Nitrogen trifluoride is a powerful greenhouse gas, with a global warming potential 17,200 times greater than that of carbon dioxide.
To know more about nitrogen trifluoride here:
https://brainly.com/question/9957071#
#SPJ11
what experimental criterion is to be used to measure the rates of bromination of the hydrocarbons used in this experiment?
To measure the rates of bromination of the hydrocarbons used in experimental criterion is color change.
Bromination is a chemical reaction including the response of a compound, and bromine results in bromine added to the compound. The item framed after bromination will display new properties from the underlying reactant.
Bromination can happen in various ways, contingent upon the reactant.
An immersed compound goes through bromination by means of a free extreme instrument.An unsaturated hydrocarbon goes through bromination by means of an expansion response.A sweet-smelling compound goes through bromination by means of an electrophilic replacement instrument.A sweet-smelling compound goes through bromination by means of an electrophilic replacement instrument.The mechanism for bromination happens in three stages.
Initiation of bromine by Lewis acids.Attack of benzene.Deprotonation to produce benzene ring.To know more about bromination, visit here:
https://brainly.com/question/28938775
#SPJ4
Carbon has four electrons in its valence shell. What types of covalent bonds is it capable of forming?.
All the elements in the second row, carbon has the most outer shell electrons that can form covalent bonds (four).
Does carbon has four electrons capable of forming covalent bonds?Additionally, carbon possesses the most outer shell electrons (four) that can form covalent bonds of any second row element.
One electron from each of the atoms contributes to a pair of electrons that are shared in a single bond. Triple bonds share three pairs of electrons, while double bonds share two pairs. Multiple covalent bonds are bonds that share more than one pair of electrons.
Because it has four valence electrons, carbon may create four covalent bonds in order to reach the complete outer energy level. It creates compounds known as hydrocarbons when it solely bonds with hydrogen. Covalent bonds between carbon atoms can be single, double, or triple bonded.
To learn more about Covalent bonds refer to:
https://brainly.com/question/3447218
#SPJ4
The temperature of water at the bottom of the deep ocean near the equator is likely to be closest to
12 Celsius
19 Celsius
50 Celsius
2 Celsius
Answer:
Four folk love legends: "Cowhand and Weaver Girl", "Meng Jiangnu crying at the Great Wall" (cry Wan Xiliang), "Liang Shanbo and Zhu Yingtai", "The Legend of the White Snake", the author does not know
The development history of the Four ancient Chinese folk legends: China is a country with a vast territory and abundant resources and a long history, which contains extremely rich national cultural heritage. Among them, the four most Chinese ones are the famous "Cowhand and Weaver Girl", "Meng Jiangnu", "Liang Shanbo and Zhu Yingtai" and "The Legend of the White Snake". The most widespread, the most influential.
Brief introduction: the gigolo knit legend began in the book of songs, cable ":" Qi he vega ", "Huan he cow". "Nineteen Ancient Poems · Long Distance Star" has called the cowherd and weaver girl husband and wife. Ying Shao "custom" Yi wen: "Zhinv Tanabata when crossing the river, make magpie bridge, legend has it that the magpie head without reason all Kun, because beam (note: bridge) to cross Zhinv also. The story has been preliminarily formed and combined with the Qixi Festival custom.
The legend of Meng Jiangnu originated from the record of Qi Liang's wife refusing to hang herself in the area of the Marquis of Qi and adhering to the rules of etiquette in the Zhuan. Later, it was added in the Dangong that "Duke Zhuang of Qi attacked Ju and took away (tunnel) and Qi Liang died. The weeping wife who greeted his coffin on the road is the archetype of the story. Han Liu Xiang's Biography of Liannu (IV) : "Qi Liangzhu died in battle, his wife cried in the city, ten days the city collapsed." And Tang (anonymous) "carved jade collection" record "Qin when Yan Qi Liang, married Meng Chao female Zhongzi wife, because good was built the Great Wall officials killed, Zhongzi cry under the Great Wall, the city collapsed. It is known that this legend was popular in the Tang Dynasty, but Meng Zhongzi and Qiliang were renamed Meng Jiangnv and Fan Xiliang in the legend. The story of Butterfly lovers first appeared in Tang's "Ten Taoist and Four Tibetan Records", which recorded the story of Liang and Zhu "having a taste of schoolmates" and "sharing the tomb". There are more detailed records in Xuanbaozhi of late Tang Zhang Reading. To the Ming Dynasty Feng Menglong's "Ancient and modern novels", and added to the British Taiwan confused belt, Liang Shanbo doubts and butterflies.
The story of White Snake came into being the latest. The origin of the story is as follows. It originates from the Three Towers of West Lake. To the Ming Dynasty Feng Menglong's "Lady White Forever Town Leifeng Pagoda" (" Warning Word "), the story has been preliminarily finalized.
Copper has a delta. Hfus = 13. 0 kj/mol. What mass of copper releases 112. 4 kj of heat as it freezes?use q equals n delta h. 9. 42 g6. 75 g549 g1590 g.
The mass of copper releases 112. 4 kj of heat as it freezes be 549.4631 g.
How do you calculate the Heat of Fusion?Let Q be the Heat Required
n be the number of moles
number of moles = mass/molar mass
H be the Heat of Fusion = 13.0 kJ/mol
Let the equation be Q = n ΔH
n = Q / ΔH
substitute the values in the above equation, we get
n = 112.4 / 13
simplifying the equation, then
n = 8.65 mol
The number of moles of copper exists 8.65 mol.
To estimate the mass,
n = 8.65 mol
mass = 63.54 g/mol
m = M × n
substitute the values in the above equation, we get
= 8.65 mol × 63.54 g/mol
m = 549.4631 g
Therefore, the correct answer is option c) 549.4631 g.
To learn more about Heat of Fusion refer to:
https://brainly.com/question/87248
#SPJ4
Find the acceleration rate if the force is 200 N and the mass of an object is 150 kg.
Answer:
Explanation:
F=ma
200=150*a
a=5/4=1.25m/s^2
During photosynthesis, _____ is reduced to _____.a. carbon dioxide; oxygenb. sugar; oxygenc. oxygen; waterd. carbon dioxide; sugare. water; carbon dioxide
Carbon dioxide is decreased and water is oxidized during photosynthesis.
What is meant by photosynthesis?Accordingly, oxygen loses electrons while carbon dioxide acquires them. Because light energy converts these electrons to carbon dioxide throughout this process, the water ([tex]$$H_2O[/tex]) received by plant roots loses electrons.
By transferring electrons, carbon dioxide is converted into carbohydrates like glucose. When water is oxidized, oxygen is also created as a byproduct.
One of the most vital processes that support life in living things is photosynthesis. Green plants utilise solar energy in this method to convert it into chemical energy.
As a result, in the process, oxygen and carbohydrates are produced from carbon dioxide and water. Most of the oxygen in the atmosphere comes from this process, which also powers the food web's foundation.
Therefore, the correct answer is option e. water; carbon dioxide.
The complete question is:
During photosynthesis, _____ is reduced to _____.
a. carbon dioxide; oxygen
b. sugar; oxygen
c. oxygen; water
d. carbon dioxide; sugar
e. water; carbon dioxide
To learn more about photosynthesis refer to:
https://brainly.com/question/19160081
#SPJ4
Does like dissolve like in solubility?
"like dissolves like" in solubility because substances with similar intermolecular forces will dissolve in each other.
Yes, "like dissolves like" is a general rule in solubility. This means that substances with similar intermolecular forces will dissolve in each other. For example, polar substances will dissolve in polar solvents, and nonpolar substances will dissolve in nonpolar solvents.
Here is an example of how "like dissolves like" works in solubility:
1. Consider the polar substance table salt (NaCl) and the polar solvent water (H2O).
2. When table salt is added to water, the positive sodium ions (Na+) are attracted to the negative ends of the water molecules, and the negative chloride ions (Cl-) are attracted to the positive ends of the water molecules.
3. This attraction between the ions and the water molecules causes the salt to dissolve in the water.
In contrast, if a nonpolar substance like oil is added to water, it will not dissolve because the intermolecular forces between the oil and water molecules are not strong enough to overcome the forces holding the oil molecules together.
To learn more about solubility refer here:
https://brainly.com/question/28170449#
#SPJ11
What happens when you titrate a weak acid with a strong base?
When we titrate a weak acid with a strong base, there is a sharp increase in pH at the beginning of the titration.
During the titration of a weak acid with a strong base, very often there is a sharp increase in pH at the beginning of the titration. This happens because the anion of the weak acid becomes a common ion which reduces the ionization of the acid. Soon after the sharp increase at the beginning of the titration the curve only changes gradually. This is caused because the solution is only acting as a buffer.
General titration of an acid with a strong base:
Basically, at equivalence point, the only species which is present in the solution are the neutral ions (the cation from the strong base and the anion from the strong acid) and water.
Learn more about titration from the link given below.
https://brainly.com/question/2728613
#SPJ4
Please help with B, I don't know how to find the molar mass.
Answer:
The molar mass of NO (nitrogen monoxide) is approximately 30.01 g/mol.
Explanation:
The molar mass of a substance is the mass of one mole of that substance, expressed in grams per mole (g/mol). The molar mass of NO (nitrogen monoxide) can be found by adding up the atomic masses of nitrogen (N) and oxygen (O), which can be found on the periodic table of elements. The molar mass of NO is approximately 30.01 g/mol.
What causes one object to change the motion of another object?
Answer:
The speed and direction of motion can be changed by applying force on an object and thus a force can bring a change in the state of motion of an object.
what chemical and its state of matter is in soda that makes it fizzy?
The chemical in soda that makes it fizzy is carbon dioxide (CO2), which is in a gaseous state. Under pressure, the CO2 dissolves into the soda when it is bottled or canned.
The CO2 escapes from the solution and generates bubbles as the can or bottle is opened and the pressure is released, giving the soda a fizzy flavor.
The quantity of fizziness and the rate at which the CO2 leaves the solution and generates bubbles can both be influenced by the amount of CO2 in the soda and the storage temperature.
Overall, soda's distinctive fizziness is a result of the gaseous CO2 in it.
To know more about carbon dioxide:
https://brainly.com/question/14445045
#SPJ4
What is the atomic number of Te 2?
The atomic number of Te₂ is 52.
Te₂ refers to a Te atom that has formed a diatomic molecule by sharing two electrons with another Te atom. The atomic number of Te₂ is 52, since the molecule contains two Te atoms with a combined atomic number of 104.
Tellurium is a rare, silvery-white, brittle metalloid that is chemically related to selenium and sulfur. Tellurium is not very abundant in the Earth's crust, with an estimated concentration of only 0.001 parts per million.
Tellurium has a variety of uses in industry and technology, including as a component of alloys used in the production of steel, copper, and lead, as a semiconductor material in electronic devices, and as a coloring agent in ceramics and glass. It is also used in some types of solar cells, as well as in the production of blasting caps and other explosives.
To know more about Tellurium here
https://brainly.com/question/4147223
#SPJ4
What is the first rule for predicting the products of chemical reaction?
The first rule for predicting the products of a chemical reaction is to identify the type of reaction that is taking place.
Chemical reactions can be broadly classified into five types: Combination or synthesis reaction: A combination reaction occurs when two or more reactants combine to form a single product. The general form of the combination reaction is A + B → AB.
Decomposition reaction: A decomposition reaction occurs when a single reactant breaks down into two or more products. The general form of the decomposition reaction is AB → A + B.
Single displacement or substitution reaction: A single displacement reaction occurs when an element displaces another element in a compound, and takes its place. The general form of a single displacement reaction is A + BC → AC + B.
Double displacement or metathesis reaction: A double displacement reaction occurs when two compounds exchange ions, and form two new compounds. The general form of a double displacement reaction is AB + CD → AD + CB.
Combustion reaction: A combustion reaction occurs when a substance reacts with oxygen, and produces heat and light. The general form of a combustion reaction is CxHyOz + O₂ → CO₂ + H₂O.
To know more about chemical reaction here
https://brainly.com/question/29762834
#SPJ4
what is acetylcholine
Acetylcholine is a chemical messenger, or neurotransmitter, that is released by nerve cells in the brain and nervous system.
It plays an important role in the transmission of nerve impulses across the synapse, or gap, between nerve cells. Acetylcholine is involved in many functions of the body, including muscle movement, memory, and cognition.
Acetylcholine is released from the presynaptic neuron into the synapse, where it binds to receptors on the postsynaptic neuron. This binding triggers an electrical signal, or action potential, in the postsynaptic neuron, which then propagates the nerve impulse to other cells.
After it has done its job, acetylcholine is broken down by an enzyme called acetylcholinesterase, so that it can no longer bind to the receptors and trigger an action potential.
Acetylcholine is an important neurotransmitter in both the central nervous system (CNS) and the peripheral nervous system (PNS). In the CNS, it is involved in memory and cognition. In the PNS, it is involved in the control of muscle movement, including the contraction of skeletal muscles and the regulation of smooth muscles in the digestive tract, lungs, and other organs.
To know more about Acetylcholine here:
https://brainly.com/question/29855206#
#SPJ11