At the Earth's surface a projectile is launched straight up at a speed of 9.7 km/s. To what height will it rise

The velocity of water flowing through the tube is approximately 0.2546 m/s.

The velocity of the water flowing through a tube with a diameter of 2m and a flow rate of 800kgs can be calculated using the formula V = Q/A, where V represents velocity, Q represents flow rate, and A represents the cross-sectional area of the tube. The cross-sectional area of the tube can be calculated using the formula A = πr^2, where r represents the radius of the tube.

Diameter of tube = 2 m, Flow rate = 800 kg/s, Density of water = 1000 kg/m³

First, find the area of the tube:
Area = π * (Diameter/2)²
Area = π * (2/2)² = π m²

Next, apply the formula:
Velocity = 800 kg/s / (π m² * 1000 kg/m³)

Velocity = 800 / (1000 * π) = 0.2546 m/s

The velocity of water flowing through the tube is approximately 0.2546 m/s.

To know more about water visit

https://brainly.com/question/28465561

#SPJ11

The force on the particle at x=0 is zero. The force on the particle at x=L/2 is -(π^2)AB/L. The force on the particle at x=L is zero.

The force on a particle is related to the negative gradient of the potential energy function, according to the formula F(x) = -dU/dx. In this case, we have [tex]U(x) = Ax^2 + Bsin(πx/L)[/tex], where A, B, and L are constants. Taking the derivative of U(x) with respect to x, we find that dU/dx = 2Ax + (Bπ/L)cos(πx/L).

At x=0, the force on the particle is given by F(0) = -dU/dx(0) = -Bπ/L.

At x=L/2, the force on the particle is given by F(L/2) = -dU/dx(L/2) = AL - (Bπ/L)cos(π/2) = AL.

At x=L, the force on the particle is given by F(L) = -dU/dx(L) = -2AL.

Therefore, the forces on the particle at[tex]x=0, x=L/2, and x=L are -Bπ/L, AL,[/tex]  and -2AL, respectively. These expressions are in terms of the constants A, B, L, and π.

Learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ11

When two objects collide inelastically, it means that they stick together and move as a single unit after the collision. In such a scenario, the kinetic energy of the system decreases during the collision. This is because some energy is lost to deformation or other non-conservative forces like friction.

Therefore, the total kinetic energy of the system after the collision is less than the total kinetic energy before the collision. However, the momentum of the system is conserved during the collision. Momentum is a vector quantity that is the product of mass and velocity. The law of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. Therefore, the total momentum of the system before and after the collision will be the same.
To summarize, when two objects collide inelastically, the kinetic energy of the system decreases, but the momentum of the system remains conserved.

for more such questions on  collision

https://brainly.com/question/30271285

#SPJ11

This individual observed that an object painted on a revolving disc appeared to be stationary when illuminated by intense electric light. He also noticed that flying insects seemed to be fixed in mid-air by the same means. It was William Roentgen

In 1895, a German physicist William Roentgen who discovered X-rays, noticed this phenomenon while experimenting with cathode rays and a vacuum tube. He noticed that a painted object on a spinning disc appeared stationary when illuminated by an intense electric light. He also observed that flying insects appeared to be suspended in mid-air when exposed to the same illumination.

These observations led him to discover X-rays, which he named due to their unknown nature at the time. Roentgen's discovery revolutionized the field of medicine and had a significant impact on scientific research. In 1901, he was awarded the Nobel Prize in Physics for his groundbreaking discovery. So, it was William Roentgen the  individual observed that an object painted on a revolving disc appeared to be stationary when illuminated by intense electric light.

To learn more about X-rays here

https://brainly.com/question/15137766

#SPJ11

we can use the law of conservation of momentum, which states that the total momentum of a system remains constant if there are no external forces acting on it.

Let's denote the mass of each car as m, and let the initial velocity of each car be v. The total initial momentum of the system is then:

p_initial = mv + m(-v) = 0

This is because the two cars are traveling in opposite directions at equal speeds.

After the collision, the two cars stick together, so they move as one object with a mass of 2m. Let's denote the final velocity of this object as v_f. The final momentum of the system is then:

p_final = (2m)*v_f

By the law of conservation of momentum, we know that p_initial = p_final. Therefore:

0 = (2m)*v_f

Solving for v_f, we get:

v_f = 0

This means that the final velocity of the two cars after the collision is zero. In other words, they come to a complete stop. This result makes sense intuitively, as the two cars have equal masses and speeds in opposite directions, so their momenta cancel out completely when they collide and stick together.

Learn more about law of conservation here:

https://brainly.com/question/24131537

#SPJ11

A command economy is one in which the government owns and runs all the businesses. Option D.

In a command economy, the government makes all the economic decisions, such as what goods to produce, how much to produce, and at what prices.

The government also owns and controls all the resources and means of production, including factories, land, and natural resources.

This is in contrast to a market economy, where individuals and businesses own and operate the means of production and make economic decisions based on market forces and supply and demand.

More on the command economy can be found here: https://brainly.com/question/19226815

#SPJ1

The wavelength of the light is approximately 546.13 nm.

To calculate the wavelength of the light, we can use the grating equation:
nλ = d sin θ
where n is the order of diffraction (we'll use n = 1 for the first order), λ is the wavelength, d is the distance between the grating lines, and θ is the angle of diffraction.

We are given:
- θ = 22.5°
- 770 lines per mm, which means d = 1/770 mm = 0.0012987 mm = 1.2987 × 10⁻⁶ m (converted to meters)
Now we can plug these values into the grating equation:
(1)λ = (1.2987 × 10⁻⁶ m) sin 22.5°
λ = (1.2987 × 10⁻⁶ m) × 0.382683
λ ≈ 4.9713 × 10⁻⁷ m = 546.13 nm (converted to nanometers)

Summary: When light with an angle of 22.5° passes through a grating with 770 lines per mm, the wavelength of the light is approximately 546.13 nm.

Learn more about wavelength click here:

https://brainly.com/question/10728818

#SPJ11

The mass of the disk is 1.96 kg.

To find the mass of the disk, we can use the formula for torque (τ) and the formula for the moment of inertia (I) of a solid disk.
The torque formula is:
τ = F * r
where F is the applied force (50 N) and r is the radius (0.14 m).
The moment of inertia for a solid disk is:
I = (1/2) * m * r²
where m is the mass of the disk and r is the radius.
The angular acceleration (α) is related to torque and moment of inertia by:
τ = I * α
Substituting the formulas and the given values, we have:
50 * 0.14 = (1/2) * m * (0.14)² * 140
Solving for m, we get:
m = 1.96 kg

Summary: When a force of 50 N is applied tangentially to a solid disk of radius 0.14 m with a constant angular acceleration of 140 rad/s², the mass of the disk is 1.96 kg.

Learn more about torque click here:

https://brainly.com/question/17512177

#SPJ11

The distance from the center of the central bright fringe to the third dark fringe on either side is approximately: 4.838 mm.

To find the distance from the center of the central bright fringe to the third dark fringe on either side, we can use the formula for the angular position of a dark fringe in a single-slit diffraction pattern. The formula is:

θ = (2n + 1) * (λ / (2 * a))

where θ is the angular position of the dark fringe, n is the fringe number (in this case, 3), λ is the wavelength of the light (668 nm or 668 x 10^-9 m), and a is the width of the slit (6.73 x 10^-6 m).

Plugging in the values, we get:

θ = (2 * 3 + 1) * (668 x 10^-9 / (2 * 6.73 x 10^-6))
θ ≈ 0.002617 radians

Now we need to find the linear distance on the screen (y) using the formula:

y = L * tan(θ)

where L is the distance between the slit and the screen (1.85 m). Calculating the distance, we get:

y = 1.85 * tan(0.002617)
y ≈ 0.004838 m or 4.838 mm

So, the distance from the center of the central bright fringe to the third dark fringe on either side is approximately 4.838 mm.

To know more about bright fringe, refer here:

https://brainly.com/question/31315270#

#SPJ11

Complete question:

Light that has a wavelength of 668 nm passes through a slit 6.73x10^-6 m wide and falls on a screen that is 1.85 m away. What is the distance on the screen from the center of the central bright fringe to the third dark fringe on either side?

The period of one vibration of middle C, whose frequency is 256 Hz, is approximately 3.90625 milliseconds.

Frequency is the number of cycles or oscillations of a wave that occur in a unit of time, typically measured in hertz (Hz). It is a fundamental concept in physics and describes various phenomena, such as sound, light, and electromagnetic waves.

Vibration refers to a mechanical oscillation or movement of an object back and forth around a fixed point. It can be caused by various forces, such as sound waves, electrical currents, or physical impacts, and is a common phenomenon in everyday life.

According to the given information:

The period of one vibration of middle C, whose frequency is 256 Hz, is approximately 3.90625 milliseconds. This can be calculated using the formula T = 1/f, where T is the period in seconds and f is the frequency in hertz. Therefore, T = 1/256 Hz = 0.00390625 seconds = 3.90625 milliseconds.

To know more about  frequency, vibration visit:

https://brainly.com/question/30874850

#SPJ11

The change in internal energy of the system is equal to the sum of these two values, which is equal to zero.

We need to determine the change in the internal energy of the system, which can be found using the first law of thermodynamics. The first law of thermodynamics states that the change in the internal energy (∆U) of a system is equal to the heat added to the system (Q) minus the work done by the system (W):

∆U = Q - W

In this case, the system loses 250 J of heat to the environment, so Q = -250 J (negative because heat is lost). The environment does 250 J of work on the system, so W = -250 J (negative because work is done on the system).

Now, let's plug the values into the first law of thermodynamics equation:

∆U = (-250 J) - (-250 J)

∆U = -250 J + 250 J

∆U = 0 J

The change in internal energy of the system is 0 J. This means that the internal energy of the system remains constant, as the heat loss to the environment is balanced by the work done on the system by the environment.

To know more about energy, visit:

https://brainly.com/question/1932868

#SPJ11

This negative transfer effect occurs due to the inconsistency in pedal placement across different car models.

Unintended acceleration is a phenomenon where a driver unintentionally accelerates their vehicle, often leading to accidents.

This negative transfer effect can occur due to inconsistencies in the position of the brake pedal and the accelerator pedal across different car models.

Drivers become accustomed to the pedal placement in their own vehicles, and when they switch to a different car, the subtle differences in pedal position may cause them to press the wrong pedal or apply excessive force, resulting in unintended acceleration.

It highlights the importance of standardizing pedal placement in the automotive industry to improve safety.

For more such questions on negative transfer, click on:

https://brainly.com/question/29559405

#SPJ11

The spacing of the slits in this Young's double-slit experiment is approximately 1.45 x 10⁻⁶ m.

To determine the spacing of the slits, we can use the formula for interference minima: d * sinθ = (m + 1/2) * λ

Here, d is the spacing slit, sinθ is the sine of the angle between the central maximum and the m-th minimum, m is the minimum order (10 in this case), and λ is the wavelength of the light (515 nm, or 5.15 x 10⁻⁷ m).

The angle θ can be found using the small-angle approximation:

sinθ ≈ tanθ ≈ y/L where y is the distance between the central maximum and the m-th minimum (0.00776 m), and L is the distance between the slits and the screen (2.00 m). sinθ ≈ 0.00776 m / 2.00 m ≈ 0.00388

Now, we can solve for the slit spacing d: d ≈ [(10 + 1/2) * 5.15 x 10⁻⁷ m] / 0.00388 ≈ 1.45 x 10⁻⁶ m

Learn more about wavelengths at

https://brainly.com/question/14702818

#SPJ11

The kinetic energy of each particle is approximately 8.187 × 10⁻¹⁴ J. To find the kinetic energy of each particle, we can use the formula: KE = (γ - 1) * m * c²

γ is the Lorentz factor, m is the rest mass of the particle, and c is the speed of light.

First, let's find the Lorentz factor for each particle. The Lorentz factor is given by:

γ = 1 / √(1 - v² / c²)

where v is the velocity of the particle.

For the electron and positron in this problem, v = 0.500c, so we have:

γ = 1 / √(1 - (0.500c)² / c²) = 1.1547

Next, let's find the rest mass of each particle. The rest mass of the electron is 9.10938356 × 10⁻³¹ kg, and the rest mass of the positron is the same.

Now we can use the formula for kinetic energy to find the energy of each particle. Plugging in the values we have:

KE = (γ - 1) * m * c²

KE_electron = (1.1547 - 1) * 9.10938356 × 10⁻³¹ kg * (299792458 m/s)² = 8.187 × 10⁻¹⁴  J

KE_positron = (1.1547 - 1) * 9.10938356 × 10⁻³¹  kg * (299792458 m/s)² = 8.187 × 10⁻¹⁴  J

So the kinetic energy of each particle is approximately 8.187 × 10⁻¹⁴ J.

To know more about kinetic energy, refer

https://brainly.com/question/8101588

#SPJ11

D. A thrust fault is a special type of reverse fault.

In a thrust fault, the fault plane has a low angle, and the hanging wall moves upward relative to the footwall.

This movement is caused by compressional forces that push rocks together, leading to deformation.

The fault plane is usually at a low angle, and the overlying block moves horizontally relative to the underlying block.

In summary, a thrust fault is a type of reverse fault characterized by a low-angle fault plane and horizontal movement of the overlying block.

Summary: A thrust fault is best described as a special type of reverse fault (option D).

Learn more about  thrust fault click here:

https://brainly.com/question/16015838

#SPJ11

The mutual inductance between the two solenoids is 26.42 H.

The mutual inductance (M) between the two solenoids in the spark coil of an automobile can be calculated using the formula:

M = ΔV x Δt / ΔI

where:
- M is the mutual inductance,
- ΔV is the change in the voltage (emf) induced in the second solenoid (35 kV or 35,000 V),
- Δt is the time it takes for the current to fall (5.8 ms or 0.0058 s),
- ΔI is the change in current in the first solenoid (7.7 A - 0 A = 7.7 A).

Plugging in the values, we get:

M = (35,000 V) x (0.0058 s) / (7.7 A)
M = 26.42 H (Henry)

So, the mutual inductance between the two solenoids is approximately 26.42 H.

This value represents the degree of coupling between the two solenoids, as it quantifies how effectively a change in current in one solenoid induces a voltage in the other solenoid. In the case of a spark coil in an automobile, this high mutual inductance allows for efficient energy transfer and the generation of the high voltage necessary for ignition.

know more about voltage here:

https://brainly.com/question/27861305

#SPJ11

The five V's of big data (volume, variety, velocity, veracity, and value) provide a holistic understanding of the challenges and opportunities associated with big data management.

The initial three V's of big data, which include volume, variety, and velocity, have been essential in describing the increasing amount of data generated and the speed at which it is processed.

However, two additional V's were later added to give a more comprehensive understanding of big data. The first additional V is veracity, which refers to the accuracy and reliability of the data.

With large volumes of data being generated, it is important to ensure that the information being used is trustworthy. The second additional V is value, which focuses on the significance and usefulness of the data.

Companies must determine the value of the data they collect to make strategic decisions and gain a competitive advantage.

To learn more about : five V's

https://brainly.com/question/29973749

#SPJ11

The pair of spacecraft that both orbited and landed on the surface of Mars in 1976 were called Viking 1 and Viking 2.

The Viking program was a series of missions launched by NASA in the 1970s with the goal of studying the surface and atmosphere of Mars. The Viking 1 and Viking 2 spacecraft were each comprised of an orbiter and a lander, which were designed to work together to gather scientific data about the Red Planet.

After entering orbit around Mars, the orbiters sent back high-resolution images of the planet's surface, while the landers touched down on different areas and conducted experiments to analyze the soil, atmosphere, and other characteristics of Mars.

The Viking missions provided a wealth of information about the planet and paved the way for future exploration of Mars by robotic and human missions.

To know more about the Viking experiment visit:

https://brainly.com/question/31551747

#SPJ11

Answer:

Saltaions :)

Explanation:

TELL ME IF I AM WRONG

The electron stream will be deflected downward due to the magnetic field created by the current in the conductor.

1. A straight conductor carrying a current generates a magnetic field around it, following the right-hand rule. In this case, with the current flowing from left to right, the magnetic field direction will be clockwise around the conductor.
2. When a charged particle, such as an electron, moves through a magnetic field, it experiences a force called the Lorentz force. This force is given by the equation F = q(v x B), where F is the force, q is the charge of the particle, v is its velocity, and B is the magnetic field.
3. In this situation, the electrons are moving horizontally to the right, and the magnetic field is directed clockwise around the conductor.

Using the right-hand rule again, the direction of the force on the electrons can be determined by pointing the thumb of the right hand in the direction of the electron's motion and curling the fingers in the direction of the magnetic field. The resulting force will be in the direction of the palm.
4. With the fingers curling clockwise around the conductor and the thumb pointing to the right, the palm will face downward. Therefore, the electron stream will experience a downward force due to the magnetic field from the conductor.
The presence of the straight conductor carrying a current from left to right above the electron stream will cause the electron stream to be deflected downward due to the magnetic field generated by the current.

For more information on current in conductor kindly visit to

https://brainly.com/question/46004

#SPJ11

If a spinner that has a radius of 0.02 m and rotating at 106 rpm, the angular deceleration due to friction is  -0.616 radians/second².

To determine the angular deceleration due to friction of a spinner with a radius of 0.02 m rotating at 106 rpm and taking 18 seconds to stop, you need to first convert the rpm to radians per second.

1. Conversion of rpm to radians per second:
106 rpm × (2π radians / 1 revolution) × (1 min / 60 seconds)

= 11.1 radians/second

2. Calculate the angular deceleration (α):

α = (ω_final - ω_initial) / time

Since the spinner comes to a stop,

α = (0 - 11.1) / 18

α ≈ -0.616 radians/second²

Thus, the angular deceleration due to friction is approximately -0.616 radians/second².

Learn more about angular deceleration: https://brainly.com/question/7248105

#SPJ11

When a 20N force is applied to the front of the spacecraft and a 20N force is applied to the back of the spacecraft, the net force acting on the spacecraft will be zero.

This is because the forces applied to the front and back of the spacecraft are equal in magnitude and opposite in direction, thereby canceling each other out. As a result, the spacecraft will continue drifting at its constant speed of 500m/s.

A spacecraft is a vehicle designed to operate in outer space. It can be manned or unmanned, and can travel to different parts of the solar system and beyond. Spacecraft use a combination of rocket propulsion, gravity assist, and other techniques to reach their destinations.

They are used for scientific exploration, military purposes, and commercial activities such as satellite deployment and space tourism. Spacecraft have played a crucial role in advancing our understanding of the universe and expanding our capabilities in space.

To learn more about spacecraft refer here:

https://brainly.com/question/3095568#

#SPJ11

The impulse given to the nail by the hammer is 7.56 Ns

The impulse-momentum theorem relates the change in momentum of an object to the impulse applied to it. The impulse is equal to the force applied to an object multiplied by the time interval over which the force is applied:

Impulse = Force x Time

Momentum = mass x velocity

When the hammer strikes the nail, it imparts a force to the nail. This force causes the velocity of the nail to change, and the hammer comes to rest.

Change in Momentum = Final Momentum - Initial Momentum = -Initial Momentum

The initial momentum of the hammer can be calculated as:

Initial Momentum = mass x velocity = 15 kg x 5.0 m/s = 75 kg m/s

The time interval over which the force is applied is given as 5.7 ms, or 5.7 x[tex]10^{-3}[/tex] s. Therefore, the average force applied to the nail can be calculated as:

Average Force = Impulse / Time

We can rearrange this equation to solve for the impulse:

Impulse = Average Force x Time

Average Force = mass x average acceleration = 15 kg x (-Initial Velocity / Time)

Substituting the given values, we get:

Average Force = 15 kg x (-5.0 m/s / (5.7 x [tex]10^{-3}[/tex]s)) = -1.32 x [tex]10^6[/tex] N

Finally, we can calculate the impulse given to the nail as:

Impulse = Average Force x Time = (-1.32 x [tex]10^6[/tex] N) x (5.7 x [tex]10^{-3}[/tex] s) = -7.56 Ns

Learn more about impulse-momentum here:

https://brainly.com/question/11674698

#SPJ11

Predicting the next date of a Landsat satellite pass over a specific location allows for effective monitoring of land cover, vegetation, and environmental changes.

The specific date for the next Landsat satellite pass over your location depends on the orbital parameters and the repeat cycle of the satellite. Landsat 7 and Landsat 8 satellites follow a near-polar sun-synchronous orbit with a repeat cycle of approximately 16 days.

By analyzing the satellite's orbit pattern, the approximate timing for its revisit can be estimated, facilitating targeted data collection and analysis.

Therefore, if the satellite passed over you on October 10th, the next pass is likely to occur around 16 days later, approximately on October 26th. However, it's important to note that exact dates may vary due to factors such as orbital adjustments and ground station scheduling.

To know more about the Landsat satellite refer here :

https://brainly.com/question/31821418#

#SPJ11

Muscles inside the body have a mechanical advantage, allowing them to exert greater force with less effort than limb muscles.

The muscles inside the body, such as those in the torso and hips, have a mechanical advantage due to their proximity to the body's core and their leverage over the limbs.

This means that they can exert greater force with less effort compared to the muscles in the limbs.

Additionally, the limbs have to overcome the weight of the limb itself, as well as any weight being lifted or moved, which requires more energy expenditure from the limb muscles.

The body's design is optimized for efficient movement, and the distribution of force-generating muscles throughout the body reflects this optimization.

For more such questions on force, click on:

https://brainly.com/question/12785175

#SPJ11

Assuming the gravitational force on the rocket is negligible, the maximum rate at which the rocket can expel gases is: V <= 7*m*g/e

To calculate the maximum rate at which the rocket can expel gases, we need to use the equation of motion for a rocket: F = m*a

where F is the force exerted by the expelled gases, m is the mass of the rocket and a is its acceleration.

The force exerted by the expelled gases can be expressed as: F = V*e

where V is the rate of gas expulsion (in volume per unit time) and e is the speed at which the gases are expelled.

Assuming the gravitational force on the rocket is negligible, we can set the net force on the rocket to be equal to the force exerted by the expelled gases:

F = V*e = m*a

Solving for V, we get: V = m*a/e

To find the maximum rate at which the rocket can expel gases, we need to find the maximum value of V that satisfies the condition that the rocket's acceleration cannot exceed seven times the gravitational acceleration on Earth (g = 9.81 m/s²).

a <= 7*g

Substituting this into the equation for V, we get: V = m*a/e <= 7*m*g/e

Therefore, the maximum rate at which the rocket can expel gases is: V <= 7*m*g/e

where m is the mass of the rocket and e is the speed at which the gases are expelled.

Note that this is an upper limit and the actual rate of gas expulsion may be lower due to other factors such as the design of the rocket engine and the properties of the fuel used.

More on maximum rate: https://brainly.com/question/31251506

#SPJ11

The downward force applied by the counterweight is 15000N.

The moment of a force is equal to its magnitude multiplied by its perpendicular distance from the pivot. So, we can write:

Moment of load = Moment of counterweight

30m x 5000N = 10m x Fc

where Fc is the downward force applied by the counterweight.

Solving for Fc, we get:

Fc = (30m x 5000N) / 10m = 15000N

Force is a physical quantity that describes the interaction between two objects. It is a vector quantity, meaning it has both magnitude and direction. Force is measured in the International System of Units (SI) using the unit of Newtons (N). The effect of force on an object depends on its mass and acceleration. According to Newton's second law of motion, the force acting on an object is directly proportional to its acceleration and inversely proportional to its mass.

When two objects interact, they exert forces on each other. These forces can either be attractive or repulsive, depending on the nature of the objects and the type of interaction. For example, the force of gravity is an attractive force between two masses, while the force between two electric charges can be either attractive or repulsive.

To learn more about Force visit here:

brainly.com/question/13191643

#SPJ4

If two stars have the exact same spectral class, then they must have similar temperatures, masses, and sizes. The spectral class of a star is determined by its surface temperature, which affects the colors and intensities of the electromagnetic radiation emitted by the star. This information is typically used to classify stars into seven different spectral types: O, B, A, F, G, K, and M, with O being the hottest and M being the coolest.

If a newly discovered stellar object is cooler than an M star, then it is probably a brown dwarf, a type of sub-stellar object that is too small to sustain nuclear fusion in its core. Brown dwarfs are often referred to as "failed stars" since they are too small to become full-fledged stars but too large to be classified as planets. Brown dwarfs emit very little visible light and instead radiate in the infrared part of the spectrum. They can be difficult to detect due to their low luminosity and can be identified using specialized instruments that are sensitive to infrared radiation.

In summary, the spectral class of a star provides information about its temperature, size, and mass, and stars with the same spectral class will have similar properties. A newly discovered stellar object that is cooler than an M star is likely a brown dwarf, a sub-stellar object that emits primarily in the infrared part of the spectrum.

for more such questions on temperature

https://brainly.com/question/26866637

#SPJ11

A fish that would stretch the spring by 0.2 meters has a weight of 2 N. Note that 2 N is equal to 0.2 kg

To determine the weight of a fish that would stretch a spring by a certain amount, we need to know the spring constant of the spring and the amount by which it is stretched.

The spring constant, denoted by k, represents the amount of force required to stretch the spring by a certain amount. It is typically measured in units of force per unit of distance, such as Newtons per meter (N/m).

Let's assume that the spring constant of the spring is k = 10 N/m, and it stretches by Δx = 0.2 meters when a fish is attached to it.

The force required to stretch the spring by Δx can be calculated using Hooke's law, which states that the force required to stretch a spring is proportional to the amount of stretch. Mathematically, this can be expressed as:

F = kΔx

where F is the force required, k is the spring constant, and Δx is the amount by which the spring is stretched.

Substituting the values we have, we get:

F = 10 N/m × 0.2 m

F = 2 N

Therefore, a fish that would stretch the spring by 0.2 meters has a weight of 2 N. Note that 2 N is approximately equal to 0.2 kg, since 1 N is equivalent to 0.1 kg. So the weight of the fish is approximately 0.2 kg.

To learn more about weight, refer below:

https://brainly.com/question/31659519

#SPJ11