At standard conditions, 1000 grams of carbon dioxide is how many liters?

Answer:

39.02 amu

Explanation:

The average atomic mass of an element can be calculated as follows :

[tex]X=\dfrac{9.67\times 38+78.68\times 39+11.34\times 40+0.31\times 41}{100}\\\\X=\dfrac{3902.29}{100}\\\\X=39.02\ amu[/tex]

So, the atomic mass of the element X is 39.02 amu.

Answer:

The combination of ions most likely to produce a precipitate is a group of answer choices:

lead nitrate soluble in water

Mg2+ and C2H3O2-.

Fe3+ and OH-.

Li+ and PO43-.

Pb2+ and NO3-.

NH4+ and SO42-.

Explanation:

Among the given options,

magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.

The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.

[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.

Answer:

La electrólisis es un proceso físico por el que se descompone una sustancia en disolución a través de la corriente eléctrica. Para que la electrólisis sea posible es necesaria una fuente de alimentación continua, una disolución iónica y dos polos (ánodo y cátodo), que atraen hacia sí los iones de signo opuesto.

Answer:

See explanation

Explanation:

In Bohr's theory, electrons are found in specific regions in space called orbits. These orbits are also called energy levels. An electron may move from one energy level to another by absorbing or emitting energy.

In the wave mechanical model, electrons are not found in a particular region in space according to Heisenberg's uncertainty principle.

We rather define a certain region in space where there is a high probability of locating the electron. This region in space where there is a high probability of locating the electron is called an orbital.

Hence, in the Bohr's model of the atom,electrons can surely be found in orbits while in the wave mechanical model, the orbital is a probability function that describes a region in space where an electron may be found.

Answer:

i think is probably A

Explanation:

because at constant temperature, the product of the pressure and volume of a given mass of and ideal gass in a closed system is always constant

Answer:

I believe the answer is A or D

Explanation:

I hope this helps you out!

Answer:

B. O2 is reduced when it accepts electrons and forms water.

Explanation:

During cellular respiration water is formed when oxygen receives electrons and picks up protons at the conclusion of the electron transport chain. The electron transport chain will stop functioning if there isn't enough oxygen to receive electrons (for example, because a person isn't breathing in enough oxygen), and ATP will no longer be created by chemiosmosis. Cells can't carry out the reactions they need to function if they don't even have enough ATP, and they may perish after a long period of time.

Answer:

The percentage efficiency of the electrical element is approximately 82.186%

Explanation:

The given parameters are;

The thermal energy provided by the stove element, [tex]H_{supplied}[/tex] = 3.34 × 10³ J

The amount thermal energy gained by the kettle, [tex]H_{absorbed}[/tex]  = 5.95 × 10² J

The percentage efficiency of the electrical element in heating the kettle of water, η%, is given as follows;

[tex]\eta \% = \dfrac{H_{supplied} - H_{absorbed} }{H_{supplied}} \times 100[/tex]

Therefore, we get;

[tex]\eta \% = \dfrac{3.34 \times 10^3 - 5.95 \times 10^2}{3.34 \times 10^3} \times 100 = \dfrac{549}{668} \times 100 \approx 82.186 \%[/tex]

The percentage efficiency of the electrical element, η% ≈ 82.186%.

9. melting point

10. balloons float because they are filled with hydrogen, a gas which is less dense than air.

11. specific gravity

12. element

13. mixture

14. sodium and chlorine

15. cutting of paper

16. condensation

17. 1 and 3

18. heat energy is released

Answer:

Final pressure, P2 = 1088.89 atm

Explanation:

Given the following data;

To find the final pressure (P2), we would use the combined gas law.

Mathematically, the combined gas law is given by the formula;

[tex] \frac {PV}{T} = k [/tex]

[tex] \frac {P_{1}V_{1}}{T_{1}} = \frac {P_{2}V_{2}}{T_{2}} [/tex]

Substituting into the formula, we have;

[tex] \frac {1.19*715}{30} = \frac {P_{2}*1.12}{43} [/tex]

[tex] \frac {850.85}{30} = \frac {P_{2}*1.12}{43} [/tex]

[tex] 28.3617 = \frac {P_{2}*1.12}{43} [/tex]

Cross-multiplying, we have;

[tex] 28.3617 * 43 = 1.12P_{2} [/tex]

[tex] 1219.5531 = 1.12P_{2} [/tex]

[tex] P_{2} = \frac {1219.5531}{1.12} [/tex]

Final pressure, P2 = 1088.89 atm

Answer:

bakit Kay's lahat Ng module mahirap

Answer:

The specific shape that an electron moves in inside a sub-level shell.

MOUNTAINS

Mountains are large, tall, and elevated land areas on the earth's surface. They have steep, sloping sides and sharp or rounded ridges, and a high point, called a peak.

PLAINS

Plains are one of the major landforms on earth. They are areas of flat lands.

PLATEAUS

A plateau is a flat, elevated landform that rises above the surrounding area.

DESERTS

Regions of dry, arid lands.

DELTAS

A river delta is a landform created by deposition of sediment that is carried by a river as the flow leaves its mouth and enters slower-moving or stagnant water.

Answer:

25 PRECENT

Explanation:

Answer:

B

Explanation:

. 2Ca(OH)2(aq) + Na2CO3(aq) 2CaCO3(s) + 2NaOH(aq)

A. Ca(OH)2(aq) + Na2CO3(aq) CaCO3(s) + 2NaOH(aq)

(1) Seven electrons

1s² 2s²2p³

There are two electrons in the 2s subshell and three in the 2p subshell. The remaining two electrons are in the inner 1s subshell.

(2) 22 electrons

1s² 2s²2p⁶ 3s²3p⁶ 4s²3d²

There are two electrons in the 4s subshell and two in the 2p subshell. The remaining 18 electrons are in the inner subshells.

(3) 17 electrons

1s² 2s²2p⁶ 3s²3p⁵

There are two electrons in the 3s subshell and five in the 2p subshell. The remaining 10 electrons are in the inner subshells.

(4) n = 4, l = 2

(5) N=2 I=0 MI=0

(6) There can be two electrons in one orbital maximum. The s sublevel has just one orbital, so can contain 2 electrons max. The p sublevel has 3 orbitals, so can contain 6 electrons max. The d sublevel has 5 orbitals, so can contain 10 electrons max.

(7) n = 4 can hold up to 16 electrons

There are 4 sublevels; 42, 4p, 4d and 4f

4s (1 orbital), 4p (3 orbitals)

4d (5 orbitals), 4f (7 orbitals)

Maximum number of electrons in energy level: 16

s = 1 orbital

p = 3 orbitals

d = 5 orbitals

f = 7 orbitals

Add these up;

1 + 3 + 5 + 7 = 16

(8) 14 electrons If l = 3, the electrons are in an f subshell. The number of orbitals with a quantum number l is 2l + 1, so there are 2×3 + 1 = 7 f orbitals. Each orbital can hold two electrons, so the f subshell can hold 14 electrons.

sorry i didn't do the last two.. also sorry if some or none of these are correct, i tried my best

Answer: Covalent bonding is when atoms of different elements  share electrons

Explanation: Taking Methane CH₄

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, sharing of electron is the only basis for the formation of covalent bond in methane.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

Carbon has an electrical configuration of 2,4. Hydrogen only has one electron in its valence shell, whereas carbon contains four electrons. In order to create methane, carbon forms a covalent connection with four hydrogen atoms, sharing its four electrons with them.

Therefore, sharing of electron is the only basis for the formation of covalent bond in methane.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

Answer:

Calculate the volume (in L) occupied by 3.40 g of NH3 at STP. (STP: 0 degree Celsius and 1 atmosphere of pressure).

Explanation:

To get the volume of ammonia gas at STP, calculate the number of moles of [tex]NH_3[/tex] in the given amount.

Number of moles of [tex]NH_3[/tex] gas is:

[tex]number of moles of NH_3 gas&=\frac{given mass of the gas}{its molecular mass} \\ &=\frac{3.40g}{17.0g/mol} \\&=0.2 mol.[/tex]

Since,

1 mol of any gas at STP occupies ------- 22.4 L of volume.

then,

0.2 mol of [tex]NH_3[/tex] occupies how much volume?

[tex]=>0.2 mol x \frac{22.4 L}{ 1.0 mol} \\=4.48 L[/tex]

Hence, the volume occupied by 3.40 g of ammonia at STP is --- 4.48 L.

Answer:

The answer is A

Explanation:

hope it helps

Answer: b and d

Explanation:

1×10^-3=1×1/10³=1×1/1000=1/1000 so b is correct

1×10^-3=1/1000=0.001

so d is correct

Answer: when gas is heated ,they gain more kinetic energy causing them to move faster.

Explanation: so as they gain kinetic energy they hit the walls of the container with more force thus causing pressure to increase

HOPE THIS HELPSS comment if u need more explanation

Viruses are known as obligatory parasites as they only become active and multiply when inside a host. Viruses are inactive when they are outside.

Answer:

A

Explanation:

Coupled reactions are reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions.

When benzene diazonium chloride interacts with phenol, the para position of the phenol molecules is associated with the diazonium salt, resulting in

p-hydroxyazobenzene. The coupling reaction is the name given to this process.

Answer:

In the esterification reaction, an OH from the molecule acid and H from the alcohol form a molecule of water.

Ethanol and butanoic acid forms ethyl butanoate

i know the answer is a theory

Answer:

Explanation:

Una manifestación, protesta o marcha es la exhibición pública de la opinión de un grupo activista (económica, política o social), mediante una congregación en las calles, a menudo en un lugar o una fecha simbólicos y asociados con esa opinión.

Answer:

b

Explanation:

Molecular formula of Decanoic Acid is  C₁₀H₂₀O₂ therefore Option A is the right answer.

Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .

In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .

In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.

Hence option A is the right answer.

To know more about Decanoic Acid;

https://brainly.com/question/8729762

#SPJ2

The question is: If 40 g of a compound C6H10O5 are dissolved in 500 g of water, determine the boiling point of this solution. (Water: boiling temperature 100 ° C and Kb = 0.52 ° C / m).

Answer: The boiling point of given solution is [tex]100.256^{o}C[/tex].

Explanation:

Given: Mass of solute = 40 g

Mass of solvent = 500 g (1 g = 0.001 kg) = 0.5 kg

[tex]K_{b} = 0.52^{o}C/m[/tex]

Molality is the moles of solute present in kg of solvent.

Moles is the mass of substance divided by its molar mass. Hence, moles of [tex]C_{6}H_{10}O_{5}[/tex] (molar mass = 162.141 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{40 g}{162.141 g/mol}\\= 0.246 mol[/tex]

Now, molality of the solution is calculated as follows.

[tex]Molality = \frac{molesof solute}{mass(in kg)}\\= \frac{0.246}{0.5 kg}\\= 0.492 m[/tex]

The boiling point is calculated as follows.

[tex]\Delta T_{b} = K_{b}m[/tex]

where,

m = molality

Substitute the values into above formula as follows.

[tex]\Delta T_{b} = K_{b}m\\= 0.52^{o}C/m \times 0.492 m\\= 0.256^{o}C[/tex]

As the boiling point of water is 100 degree Celsius. So, the boiling point of solution is as follows.

[tex](100 + 0.256)^{o}C\\= 100.256^{o}C[/tex]

Thus, we can conclude that the boiling point of given solution is [tex]100.256^{o}C[/tex].

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

Life on Earth is based on carbon, likely because each carbon atom can form bonds with up to four other atoms simultaneously. This quality makes carbon well-suited to form the long chains of molecules that serve as the basis for life as we know it, such as proteins and DNA.

Hope it helps uh ✌️✌️✌️