Arrange the necessary steps in order for finding the molecular formula of an unknown compound from mass percent data. Place the first step at the top of the list. 1. Assume that the sample contains 100.0g of compound and express each mass percent as a mass in grams
2. convert the mass of each element to moles for each element
3. derive the emirical formula looking for the simplest whole-number ratio of moles
4. divide the molar mass of the compound by the mass of the empirical formula in order to find a multiple that is an integer
5. multiply each subscript of the empirical formula by the integer multiple

Answer:

Explanation:

The overall displacement can be found using the Pythagorean theorem, which states that in a right triangle, the square of the hypotenuse (the overall displacement) is equal to the sum of the squares of the other two sides.

Let's call the displacement in the northwest direction "x" and the displacement in the east direction "y". The overall displacement can be found using the equation:

√(x^2 + y^2) = √((-10)^2 + (40)^2 + (-60)^2) = √(1600 + 1600 + 3600) = √(7000) = 84.85 km

So the overall displacement of the car from the starting point is approximately 84.85 km.

The tension in the cord will be 6.99 N. To solve this problem we will refer to the laws of Mersenne. Mersenne's laws are regulations relating to the frequency of oscillation of a stretched string or monochord, helpful in musical tuning and musical instrument building.

This law suggests that the velocity in a string is directly proportional to the root of the applied tension and inversely proportional to the root of the linear density, that is,

v = √T/μ

Here,

v = Velocity

μ = Linear density ( mass per unit length)

T = Tension

Rearranging to find the Period we have that

T = v²μ

T = v²(m/L)

As we know that speed is equal to displacement in a unit of time, we will have to

T = (L/t)² (m/L)

T = (7.3/0.72)² (0.50/7.3)

T = 6.99 N

Therefore, the tension in the cord will be 6.99 N.

To learn more about Tension in the cord visit here:

https://brainly.com/question/14431875

#SPJ4

The resultant force acting on the gate is equal to zero, the gate will not rotate and the pin can be placed at any location on the circumference of the gate.

To determine the placement of the pin on the circular gate, we need to consider the forces acting on the gate when the water reaches a height h = 10 ft.

When water reaches a height h = 10 ft, the gate is subjected to two types of forces: (1) buoyant force and (2) weight of the gate. The buoyant force acts upwards and is equal to the weight of the fluid displaced by the gate. The weight of the gate acts downwards and is equal to the mass of the gate multiplied by the acceleration due to gravity (g).

Let's assume that the gate has a uniform thickness and its density is equal to the density of water (ρ). Then, the volume of the gate can be calculated as follows:

V = (π/4) * d² * t

where d is the diameter of the gate and t is its thickness. The mass of the gate can be calculated as follows:

m = ρ * V

The buoyant force can be calculated as follows:

F_b = ρ * g * V

The weight of the gate can be calculated as follows:

F_w = m * g

The net force acting on the gate can be calculated as the difference between the buoyant force and the weight of the gate:

F_net = F_b - F_w = ρ * g * V - m * g = (ρ - ρ) * g * V = 0

Since the net force is equal to zero, the gate will not rotate and the pin can be placed at any location on the circumference of the gate.

Learn more about Circular Gate Rotation Analysis here:

https://brainly.com/question/13449800

#SPJ4

Increase in small-artery pressure would increase capillary hydrostatic pressure most.

What are oncotic pressure and capillary hydrostatic pressure?

The systemic perfusion of the capillary, the arterial and venous pressures, and the variation in capillary resistance all affect the hydrostatic pressure. Oncotic pressure results from the inability of plasma proteins to easily pass the capillary membrane, particularly albumin.

Because of the hydrostatic pressure, fluid leaks through the capillary's pores and into the interstitial space as the blood travels along it. As the blood flows down the capillary from the arterial to the venous end, the pressure exerted by the blood will decrease.

To earn more about hydrostatic pressure use link below:

https://brainly.com/question/4347709

#SPJ4

The frequency of electromagnetic radiation with a wavelength of 536.0 nm is 5.6 x 10¹¹ Hz.

Electromagnetic radiation is a form of energy that consists of waves of electric and magnetic fields, travelling through the air or other substances at the speed of light. These waves are created when an electric charge is accelerated and can be generated from a variety of sources, such as a light bulb, the sun, a microwave oven, or a radio transmitter.

The frequency (f) of electromagnetic radiation is calculated using the equation:
f = c/λ
where c is the speed of light (3.00 x 10⁸ m/s) and λ is the wavelength of the radiation (536.0 nm).
Therefore, we can calculate the frequency (f) as follows:
f = (3.00 x 10⁸ m/s) / (536.0 nm)
First, we need to convert the wavelength from nanometers (nm) to meters (m). We can do this by dividing 536.0 nm by 1,000,000 to get 0.000536 m.
Therefore, we can calculate the frequency (f) as follows:
f = (3.00 x 10⁸ m/s) / (0.000536 m)
f = 5.6 x 10¹¹ Hz
The frequency of electromagnetic radiation with a wavelength of 536.0 nm is 5.6 x 10¹¹ Hz.

To learn more about electromagnetic radiation
https://brainly.com/question/17216753
#SPJ4

the girl's velocity after they push off is 0.816 m/s.

Velocity is described as the directional speed of an object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time.

The momentum of the boy after he pushes off is given by m_boy * v_boy = -747 N * 0.540 m/s = -405.08 N * m/s.

The momentum of the girl after she pushes off is denoted as   m_girl * v_girl, where m_girl is the mass of the girl and v_girl is her velocity.

The principle of conservation of momentum requires that the total momentum of the two-person system before and after the push off must be the same, hence we have:

m_boy * v_boy + m_girl * v_girl = 0

Substituting in the values for m_boy and v_boy, we find:

-405.08 N * m/s + m_girl * v_girl = 0

Solving for v_girl, we find:

v_girl = 405.08 N * m/s / m_girl = 405.08 N * m/s / 497 N = 0.816 m/s.

Learn more about velocity at: https://brainly.com/question/25749514

#SPJ1

Answer: approximately 13.6 m/s.

Explanation: The sled's speed after it has traveled the first 100 m can be determined using the principles of kinematics.  We can use the equations of motion to solve this problem.

First, let's identify the given information:

- Initial speed (v₀) = 9.2 m/s (sled's top speed before starting down the track)

- Distance traveled (s) = 100 m (the first 100 m of the track)

- Angle of the slope (θ) = 9.0° (angle of the track)

To find the sled's speed after traveling 100 m, we need to determine the final speed (v) using the equation of motion that relates initial speed, final speed, distance, and angle:

v² = v₀² + 2as

Here's how we can calculate it step by step:

Convert the angle from degrees to radians:

θ = 9.0° = (9.0° * π) / 180 ≈ 0.157 radians

Determine the acceleration (a) using the gravitational acceleration and the angle of the slope:

a = g * sin(θ)

g ≈ 9.8 m/s² (acceleration due to gravity)

a ≈ 9.8 m/s² * sin(0.157) ≈ 1.36 m/s²

Substitute the known values into the equation of motion:

v² = (9.2 m/s)² + 2 * (1.36 m/s²) * (100 m)

Simplify and solve for v:

v ≈ √(9.2² + 2 * 1.36 * 100) ≈ 13.6 m/s

Therefore, the sled's speed after traveling the first 100 m is approximately 13.6 m/s.

The resultant speed of the plane would be 230.03 km/hour

Vectors are the units that have both magnitude and direction. We can directly add and subtract if they are going in the same or the opposite direction. If they are all going in the same direction, we employ the formula that will take the square root of each vector's sum of squares. In this case, the vectors are inclined to one another with angle 45° (plane flying from east to northeastern)

The formula below is used to calculate the resultant vector from two vectors that are inclined to one another. The resultant vector, R, is created when the vectors A and B are inclined at an angle Ø to one another:

                                  R² = A² + B² + 2ABCosØ

Thus, the resultant speed of the plane would be

R² = 200² + 40² + (2 × 200 × 40 × Cos 45°)

R² = 40,000 + 1,600 +11,313.7

R =√52,913.7

R = 230.03 km/hour

To learn more about resultant, click here:

https://brainly.com/question/29076329

#SPJ4

The force exerted between the charges q1 and q3 is   -5.25 × 10⁻⁶ N and that between q2 and q3 is -2.93   × 10⁻⁶ N. Hence the net force is - 8.18  × 10⁻⁶ N .

According to Coulomb's law of force, the electrostatic force between two charges separated by a distance of r is given as follows:

Fc = Ke q1 q2 /r²

where Ke = 8.9 × 10⁹ Nm²/C²

Given the charge of  q1 = 3.97  × 10⁻⁹ C

charge of q3  = -5.95 × 10⁻⁹ C

distance r = 0.200 m

then Fc =  8.9 × 10⁹ Nm²/C²  ( 3.97  × 10⁻⁹ C) (-5.95 × 10⁻⁹ C)/(0.200 m)² = -5.25 × 10⁻⁶ N

Similarly, the force on q3  by the charge q2 is calculated as follows:

distance to q2 = 0.30 m

charge of q2 = 4.99 × 10⁻⁹ C.

Then Fc =   8.9 × 10⁹ Nm²/C²  (4.99 × 10⁻⁹ C ) (-5.95× 10⁻⁹ C)/(0.30 m)² = - -2.93 × 10⁻⁶ N

The net electric force acting on A =  3.9 × 10⁻⁵ N - (-1.9 × 10⁻⁵ N) = 5.8 × 10⁻⁵ N.

Therefore, the net electric force acting on q3 is  8.18  × 10⁻⁶ N.

Find more on Coulomb's law :

brainly.com/question/9261306

#SPJ1

Your question is incomplete. But your complete question probably was:

Two point charges are placed on the x-axis as follows: charge  3.97 nC is located at 0.200 m (q1) and charge 4.99 nC (q3) is at -0.304 m .What is the magnitude of the total force exerted by these two charges on a negative point charge q3

= -5.95 nc that is placed at the origin?

the initial speed of the bullet as it was fired horizontally into the wooden block resting on a horizontal surface is 265m/s.

A conservation law states that the total linear momentum of a closed system remains constant through time, regardless of other possible changes within the system.

Given, A 5.00g bullet is fired horizontally into a 1.20kg wooden block resting on a horizontal surface.

In our case,

Mass of bullet = 5 gram = 0.005 kg

Mass of wooden block = 1.2 kg

the initial velocity of block = 0

Kinetic friction = 0.20

First, we get the velocity of the Wood.

From Conservation of Energy:

1/2m v² = μ mgs

v = √(2 μgs)

Where v is the velocity of the block,

μ is the coefficient of kinetic friction,

s is the displacement of the bullet

g is the acceleration due to gravity (9.81)

v = √(2 *0.2*9.81 * 0.31)

v = 1.1 m/s

so, the velocity of the wooden block after the collision will be 1.10 m/s

Now, we determine the velocity of the bullet. Using Conservation of Momentum.

m₁v₁ + m₂v₂ = MV

0.005 *v + 0 = (1.20 + 0.005) * 1.1

v = 1.325/0.005

v = 265 m/s

Therefore, the initial speed of the bullet as it was fired horizontally into the wooden block resting on a horizontal surface is 265m/s.

Learn more about the conservation of momentum here:

brainly.com/question/3920210

#SPJ1

When the car reaches 7 m it has a kinetic energy of 14364 J and a terminal velocity of 4.67 m/s.

Speed defines the direction in which a body or object is moving. Speed is primarily a scalar quantity. Velocity is basically a vector quantity. Rate of change of distance. Rate of change of displacement.

(a) The rate of change of displacement is known as velocity. It can be calculated by finding the ratio of displacement and total required time. The SI unit for velocity is "m/s", just like velocity.

The work done by the forward force is:

W1 = F1d = 1143 N × 7 m = 8001 J The work done by the second force is:

W2 = F2d = 909 N x 7 m = 6363 J The net work done on the car is the sum of the following he two works.

[tex]\mathrm{W_{net}}[/tex] = W1 + W2 = 8001 J + 6363 J = 14364 J According to the work energy principle, the net work done in a car is equal to the change in its kinetic energy.

[tex]\mathrm{W_{net}}[/tex] = ΔK where ΔK is the change in kinetic energy. Since the car starts from a standing start, the initial kinetic energy is 0, so ΔK equals the final kinetic energy. So it looks like this:

[tex]\mathrm{W_{net}}[/tex] = 14364 J Finally, we can convert this energy to Joules using the following formula:

1 J = 1 kg m²/s²

So it looks like this:

K = 14364 J = (2.2 × 10³ kg) × v² where v is the final velocity of the car. Solving for v gives:

v = √(K / (2.2 × 10³ kg))

= √(14364 J / (2.2 × 10³ kg))

= 4.67 m/s

So when the car reaches 7 m it has a kinetic energy of 14364 J and a terminal velocity of 4.67 m/s.

To know more about kinetic energy visit:

brainly.com/question/12550364

#SPJ1

Answer:

130.34 m/s²

Explanation:

see attachment

hope this helps!

The magnitude of the acceleration of the entire system will be 2.13m/s²  option (5) is correct.

The masses that are suspended from the table m = 2 kg and m' = 4 kg.

And the mass kept on the table is, m'' = 4 kg.

The frictional force will oppose the motion of mass 4 kg, kept on the table. Then the required value of frictional force will be,

f=∪×[tex]m^{//}[/tex]×g

=0.11×4×9.8

=4.321

Since the mass kept on the right side is more.

-f + m''g + (m' +m)a = m'g

Where,

a is the magnitude of the acceleration of the system.

-4.312+ 4(9.8) + (4 -2)a = 4(9.8)

2a = 4.312

a= 2.135

Thus, we can say that the magnitude of the acceleration of the entire system is 2.13m/s²

Learn more about acceleration:

https://brainly.com/question/26246639

#SPJ4

Complete question is:

There is friction between the block and the

table.

The suspended 2 kg mass on the left is

moving up, the 4 kg mass slides to the right

on the table, and the suspended mass 4 kg on

the right is moving down.

The acceleration of gravity is 9.8 m/s

2

.What is the magnitude of the acceleration

of the system?

1. 1.67253

2. 1.9845

3. 1.75311

4. 2.47673

5. 2.1315

6. 2.058

7. 2.548

8. 1.33933

9. 1.5288

10. 2.03127

Answer in units of m/s²

For part 4 after solving the equation the the rotation rate is 0.74 rev/s.

What is rotation rate?

Rotation rate is the angular velocity of a body or object in a circular motion. It is typically measured in rotations per minute (RPM) and is the number of times a full rotation is completed in one minute.

Part 1 of 4 - Conceptualize: Look carefully at the figure and imagine you are the astronaut sitting in the seat at the far right. As the centrifuge rotates, you are experiencing an acceleration toward the center of the device.

The faster the centrifuge spins, the larger is that acceleration. The problem is asking for a rotation rate, measured in revolutions per second. Because the period of circular motion is the number of seconds per revolution, we see that the rotation rate will be the inverse of the period.

Part 2 of 4 - Calculate: To calculate the rotation rate, we need to find the period of the motion. The period of circular motion is given by:

T = 2π√(L/2a)

Where L is the length of the centrifuge and a is the centripetal acceleration.

Part 3 of 4 - Calculate: In this problem, L = 59.0 ft, and a = 20.0g. Since gravitational acceleration is equal to 9.8 m/s2, we need to convert the acceleration from g to m/s2. We can do this by multiplying the acceleration by 9.8. Thus, a = 20.0g × 9.8 m/s2 = 196.0 m/s2. Substituting the numerical values into the equation, we get:

T = 2π√(59.0 ft/2 × 196.0 m/s2) = 2π√(29.5 ft × 9.8 m/s2) = 2π√(291.1 m2/s2) = 2π√(291.1) s = 5.15 s

Part 4 of 4 - Calculate: Since the period of circular motion is the number of seconds per revolution, the rotation rate is equal to the inverse of the period. Thus, the rotation rate is:

Rotation rate = 1/T = 1/5.15 s = 0.74 rev/s

To learn more about rotation rate

brainly.com/question/29576917

#SPJ4

(a) Normalization factor for wavefunction 1 is, [tex]A = \sqrt{\dfrac{3^3}{{(16\pi a^5)}}[/tex], for wavefunction 2 is, [tex]B = \sqrt{\dfrac{15}{16\pi a^5}}[/tex]. The two wavefunctions are mutually orthogonal. (b) The expectation value of r for [tex]\psi_1[/tex] is 32.

(a) To normalize the wavefunctions, we need to find the normalization constants A and B such that

[tex]\int \|{\psi_1}\|^2 dV = 1[/tex] and [tex]\int \|{\psi_2}\|^2 dV = 1[/tex]

where [tex]\psi_1[/tex] and [tex]\psi_2[/tex] are the two wavefunctions given.

(i) [tex]\psi_1 = (2 - \dfrac{r}{a}) \times e^{\dfrac{-r}{2a}}[/tex]

The normalization condition for psi1 is:

[tex]\int \|\psi_1\|^2 dV = \int \{2 - \dfrac{r}{a} \times e^{\dfrac{-r}{a}}\}^2 r^2 sin\theta dr d\theta d\phi\\\\ = 1[/tex]

Evaluating the integral using spherical coordinates, we get:

[tex]\int_0^\infty \int_0^\pi \int_0^{2\pi} [(2 - r/a)^2 e^{-r/a} r^2 sin\theta]\ dr\ d\theta\ d\phi = 1\\\\\dfrac{(16\pi a^5)}{(3^3)} \times \|A\|^2 = 1\\A = \dfrac{3^3}{{(16\pi a^5)}^{0.5}}[/tex]

(ii) [tex]\psi_2 = r sin\theta\ cos\phi\ e^{\dfrac{-r}{2a}}[/tex]

Evaluating the integral using spherical coordinates, we get:

[tex]\int_0^\infty \int_0^\pi \int_0^{2\pi} r^4 sin^3\theta cos^2\phi e^{-r/a} dr\ d\theta\ d\phi = 1\\\\\dfrac{16\pi a^5}{15} \times \|B\|^2 = 1\\B = \sqrt{\dfrac{15}{16\pi a^5}}[/tex]

To confirm that the two wavefunctions are mutually orthogonal, we need to evaluate the integral [tex]\int \psi_1\times \psi_2 dV[/tex] and show that it is equal to zero. Using spherical coordinates, we get:

[tex]\int_0^\infty \int_0^\pi \int_0^{2\pi} [(2 - r/a) \times e^{-r/a} \times r sin\theta cos\phi \times e^{-r/2a}]\ r^2\ sin\theta\ dr\ d\theta\ d\phi\\\\= 8\pi a^5 \times [\int_0^\infty e^{-r/a} r^2 (2 - r/a) e^{-r/2a}\ dr] \times [\int_0^\pi sin\theta\ cos\theta\ d\theta] \times [\int_0^{2\pi} cos\phi\ d\phi]\\= 0[/tex]

Therefore, the two wavefunctions are mutually orthogonal.

(b) To evaluate the expectation values of r and r^2, we need to calculate the integrals [tex]\int psi_1 \times r\ \psi_1 dV[/tex] and [tex]\int \psi_1 \times r^2\ \psi_1 dV[/tex]. Using spherical coordinates, we get:

For psi1:

[tex]\int psi_1 \times r\ \psi_1 dV = 4\pi \int_0^\infty (2 - r/a)^2 e^{-r/a} r^4 dr\\\\ = \dfrac{32\pi a^5}{15}[/tex]

[tex]\int \psi_1 \times r^2\ \psi_1 dV = 4\pi \int (2 - r/a)^2 e^{-r/a} r^5 dr\\\\ = \dfrac{128\pi a^6}{45}[/tex]

Therefore, the expectation value of r for [tex]\psi_1[/tex] is 32.

To know more about the wavefunctions, here

brainly.com/question/29089081

#SPJ4

Answer:

-11.29 m

Explanation:

The length of the incline can be calculated using the following formula:

L = (Vf^2 - Vi^2) / (2 * a)

where:

L = length of incline

Vf = final speed (15 m/s)

Vi = initial speed (2 m/s)

a = acceleration due to gravity (9.8 m/s^2 on the surface of the Earth)

Since the skier is going downhill, the acceleration is negative.

Substituting the given values into the formula:

L = (15^2 - 2^2) / (2 * -9.8)

L = (225 - 4) / -19.6

L = 221 / -19.6

L = -11.29 m

So the length of the incline is approximately -11.29 meters. This negative value indicates that the skier's final position is lower than the starting position.

The difference between the carrier's highest data speed (76.2 Mbps) and the mean of all 50 data speeds (15.95 Mbps) is 60.25 Mbps.

The difference of 60.25 Mbps between the carrier's highest data speed and the mean of all 50 data speeds is quite significant. It shows that this particular carrier has a much higher data speed than the average of the other 50 airports. This could be due to the particular location of the airport, the network infrastructure, or other factors.

An elementary reaction is a type of chemical reaction in which the reactants directly form the products in a single reaction step and with a single transition state. In contrast to a non-elementary reaction, which may involve multiple steps or intermediates, an elementary reaction is a single-step process in which the reactants are converted into products in a single step.

Learn more about the data speeds of a given smartphone:

https://brainly.com/question/8647349

#SPJ4

The correct order from dimmest to brightest as these stars would appear in the sky is Star C (0.0), Star A (0.4), Star D (4.2), Star B (5.6).

Apparent magnitude is a measure of the star brightness as seen from the Earth. Lower magnitudes indicate brighter stars and higher magnitudes indicate dimmer stars.

In the case of the four stars listed, Star C has the lowest magnitude of 0.0, making it the brightest of the four. Star A is slightly dimmer with a magnitude of 0.4. Star D is dimmer still with a magnitude of 4.2, and Star B is the dimmest of the four with a magnitude of 5.6. It's important to note that this is just a relative comparison and does not necessarily indicate the true brightness of the stars, only how bright they appear from our perspective on Earth.

To learn more about star brightness visit: https://brainly.com/question/14376690

#SPJ4

One of the primary characteristics present in situations in which management science techniques are applied is that the management problems have only a few variables. Thus, the correct option is A.

Management science is important while doing any research, business, or study because it helps the organizations in identification of the issues which they need to solve, streamline management efforts, use resources more effectively, and also develop roadmaps for achieving the set goals.

Management problems are studied and these are so complicated that managers need help to analyze a large number of variables before doing  any research.

Therefore, the correct option is A.

Learn more about Management science here:

https://brainly.com/question/30325986

#SPJ1

Your question is incomplete, most probably the complete question is:

One of the primary characteristics present in situations in which management science techniques are applied is ________.

A) that the management problems have only a few variables

B) that the situation deals with quantifiable factors such as sales

C) that the situation deals with the physiological, safety, social, esteem, and self-actualization needs of organization members

D) that the situation deals with assessing qualitative factors of the workplace or environment

E) that social implications are the guidelines for making a particular decision

0.00455 moles of air must be released from the tire to restore the pressure to 210 kPa at 50 degrees C.

The pressure rise in a 0k tire when the air temperature rises from 25 degrees C to 50 degrees C can be calculated using the ideal gas law. The formula is

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. In this case, the temperature is rising from 25 degrees C to 50 degrees C, so the pressure will increase with the temperature.

By plugging these values into the equation, we can calculate that the pressure increase is 45.5 kPa.

To restore the pressure to its original value of 210 kPa at 50 degrees C, we need to bleed off the amount of air equal to the pressure increase. This is equal to 45.5 kPa, or 0.00455 moles. This means that 0.00455 moles of air must be released from the tire to restore the pressure to 210 kPa at 50 degrees C.

For more questions like Tire click the link below:

https://brainly.com/question/13257383

#SPJ4

The amount of work done by the applied force on the skier is 500 J.

The amount of work done by the applied force on the skier is calculated by applying the following equation as shown below.

W = Fd

where;

The amount of work done by the applied force on the skier is calculated as;

W = (25 N ) x ( 20 m )

W = 500 J

Thus, the work done by a force is defined to be the product of component of the force in the direction of the displacement and the magnitude of this displacement.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

As long as an object is not gaining or losing mass, a constant force applied to an object for a period of time will result in a change in velocity (D)

When a constant force is applied to a large body, in accordance with Newton's second law, it's velocity will change at a rate that is constant during the acceleration. In the simplest case, when a force is applied to a moving object that is at rest, the object accelerates in the direction of the applied force.

A body that is already moving or that is being observed from a moving inertial reference frame may look to accelerate, decelerate, or change direction depending on the direction of the force as well as the directions that the object and the referencing frame are traveling in regard to one another.

To learn more about constant force, click here:

https://brainly.com/question/13791623

#SPJ4

A) Motion 1: The car starts at rest at the stop sign, at x=0, and then accelerates in the east (positive x) direction.

Acceleration is the rate of change of an object's velocity over time. It is a vector quantity, meaning that it has both magnitude and direction. Acceleration is usually measured in meters per second squared (m/s2). It is a fundamental concept in physics, and is used to describe the motion of objects in a variety of contexts, from astronomy to everyday life. Acceleration can result from a force, from a change in direction, or from a change in speed.

The correct position vs time graph for this motion is a line with a positive slope, starting at the origin and going up to the right. This shows that the car is accelerating in the positive x direction and is increasing its position over time.

To learn more about accelerates
https://brainly.com/question/29383005
#SPJ4

Answer:

The velocity of the ball before it hit the ground was (3.59 m/s, -3.32 m/s) in the horizontal and vertical direction

Explanation:

The velocity of the ball can be calculated using the equation of motion:

v^2 = u^2 + 2as,

where

u = initial velocity,

v = final velocity,

a = acceleration due to gravity (9.8 m/s^2),

s = vertical height fallen (0.86 m).

Solving for u:

u = sqrt(v^2 - 2as)

We know the final velocity, v = 0 (the ball lands on the ground and stops), so

u = sqrt(2as) = sqrt(2 * 9.8 * 0.86) = 3.32 m/s.

The direction of the velocity before it hit the ground can be determined using horizontal distance traveled and time of flight.

The time of flight, t, can be found using:

t = sqrt(2s/a) = sqrt(2 * 0.86 / 9.8) = 0.39 s.

The horizontal velocity, vx, can be found using:

vx = d / t = 1.4 / 0.39 = 3.59 m/s.

Using Thomson's cathode ray tube and Millikan's oil drop experiment, the charge of an electron was determined.

Thomson's cathode ray tube and Millikan's oil drop experiment were two important experiments in the history of physics. Thomson used his cathode ray tube to observe the behavior of electrons, while Millikan used his oil drop experiment to measure the charge of an electron. By combining the results of these two experiments, scientists were able to determine the charge of an electron, which is a fundamental unit of electrical charge in the study of electricity and electromagnetism.

You can learn more about electrical charge at

https://brainly.com/question/26100412

#SPJ4

To find the resultant force and magnitude of charges in a right-angled triangle, you need to use Pythagorean theorem and principles of electrostatics respectively.

The magnitude of the charges can be determined using Coulomb's law, which states that the force between two charges is proportional to the product of their magnitudes and inversely proportional to the square of the distance between them.

To find the resultant force, you need to resolve each individual force into its x and y components and then add them up vectorially.

The magnitude of the resultant force can then be found using the Pythagorean theorem, which states that the magnitude of the resultant force is equal to the square root of the sum of the squares of its x and y components.

Learn more about resultant force here: https://brainly.com/question/25239010

#SPJ1

A. Slow, legato. for a love story, we use slow and legato tempo to reflect the mood when the ice cream van interrupted the wedding ceremony.

The beats per minute are the most precise way for a composer to specify the intended speed (BPM). This means that a specific note value is designated as the beat (for instance, a quarter note), and the marking specifies that a specific number of these beats must be performed each minute.

The music's performance speed is thus determined by the tempo. So you can rapidly establish the Beats Per Minute, or BPM, by counting how many beats there are in a music played at a particular rate. If you're pushed for time, you can also double the amount of beats in 15 seconds of music by four.

To know more about tempo visit:

https://brainly.com/question/22130655

#SPJ1

The total energy of the system remains constant.

Option B.

The law of conservation of energy states that energy can neither be created nor destroyed but can be transferred from one form to another.

When you let go of the book,  and it is pushed up by the spring, the elastic potential energy of the spring will be converted into potential energy and kinetic energy of the block.

elastic potential energy = potential energy + kinetic energy

Thus, we can conclude that the total energy of the system is constant.

Learn more about conservation of energy here: https://brainly.com/question/166559

#SPJ1

The velocity of the football that is thrown by Felipe to Lilah will be 23 km per hour.

The movement of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time.

Felipe is riding his skateboard toward Lilah at 15 km/h. He throws a football to Lilah. The football is thrown at 8 km/h.

Then the velocity of the ball is given as,

v = 15 + 8

v = 23 km/h

The velocity of the ball will be 23 km / h.

More about the relative velocity link given below.

https://brainly.com/question/19260269

#SPJ1