arrange the following compounds in order of decreasing boiling point, putting the compound with the highest boiling point first. a) I > II > III. b) I > III > II. c) III > I > II. d) III > II > I.

Of the following compounds given E) [tex]C_3H_8[/tex] is the only hydrocarbon.

[tex]C_3H_8[/tex] is a hydrocarbon. It is a chemical formula representing propane, which is a saturated hydrocarbon belonging to the alkane family. Hydrocarbons are organic compounds composed solely of hydrogen and carbon atoms. They can exist as gases, liquids, or solids and are an essential component of fossil fuels and many other organic compounds.

Option A ([tex]C_6H_12O_6[/tex]) represents glucose, a carbohydrate, which contains oxygen in addition to carbon and hydrogen atoms. Option B ([tex]H_2CO_3[/tex]) represents carbonic acid, which is an inorganic compound containing carbon, hydrogen, and oxygen atoms. Option C ([tex]CO_2[/tex]) represents carbon dioxide, an inorganic compound composed of carbon and oxygen atoms. Option D ([tex]CCl_2F_2[/tex]) represents dichlorodifluoromethane, which is a chlorofluorocarbon (CFC) and not a hydrocarbon.

Learn more about hydrocarbon here:

https://brainly.com/question/5214674

#SPJ11

Ten scientists, including Dalton, Thomson, Rutherford, Bohr, and Curie, contributed to the atomic theory through their groundbreaking discoveries and theories.

The atomic theory, our understanding of matter's fundamental building blocks, owes its development to numerous scientists. John Dalton proposed the modern atomic theory, while J.J. Thomson discovered the electron and suggested the "plum pudding" model. Ernest Rutherford's gold foil experiment revealed the atomic nucleus, and Niels Bohr expanded on this with the planetary model. James Chadwick discovered the neutron, Dimitri Mendeleev formulated the periodic table, and Marie Curie made significant contributions to radioactivity research. Werner Heisenberg and Erwin Schrödinger contributed to quantum mechanics, with Heisenberg formulating the uncertainty principle and Schrödinger developing wave equations.

Finally, Robert Millikan determined the electron's charge and mass through the oil-drop experiment. These ten scientists revolutionized our understanding of atoms and atomic structure, shaping the atomic theory as we know it today. Their discoveries and theories laid the foundation for further advancements in physics and paved the way for technological applications of atomic knowledge.

To learn more about modern atomic theory click here

brainly.com/question/25176189

#SPJ11

Complete Question

Who are the 10 scientists that contributed to the atomic theory?

To determine the sample volume that will yield a countable plate, we need to use the original concentration and the desired range of colony counts (30-300 cfu).

First, we need to calculate the dilution factor that will result in a countable plate. Let's assume we want to aim for a range of 100-200 cfu per plate. Using the equation:

Dilution factor = (total CFU / countable plate range)

Dilution factor = (2.79 x 10^6 / 200) = 13950

This means that we need to dilute the sample by a factor of 13950 to achieve a countable plate.

Now, we can use the equation:

Final volume = (initial volume / dilution factor)

To determine the sample volume that will yield a countable plate. Let's assume our initial volume is 1 ml:

Final volume = (1 ml / 13950) = 0.0000717 ml

To express this answer as 10x ml, we need to move the decimal point 4 places to the right:

Final volume = 7.17 x 10^-5 ml

Therefore, a sample volume of 7.17 x 10^-5 ml (or 0.717 microliters) should yield a countable plate in the range of 100-200 cfu.

learn more about this

https://brainly.in/question/9973114?referrer=searchResults

#SPJ11

Evelyn suggests a creative idea of linking the power source of a TV to the physical activity of the kids riding bicycles. This concept involves an energy transformation from mechanical energy to electrical energy.

The energy transformation occurs as the kinetic energy generated by the kids pedaling the bicycles is converted into electrical energy to power the TV.When the kids pedal the bicycles, their muscular energy is transformed into mechanical energy in the form of rotational motion. This mechanical energy can be harnessed using a generator or dynamo attached to the bicycles. The generator converts the mechanical energy into electrical energy through the principle of electromagnetic induction. The generated electrical energy can then be used to power the TV, providing the necessary electricity for its operation.

This creative idea not only promotes physical activity but also demonstrates the conversion of one form of energy (mechanical energy) into another form (electrical energy) through an energy transformation process. It highlights the potential to utilize human-generated energy for practical applications, encouraging sustainable and interactive energy consumption.

To learn more about energy transformation click here : brainly.com/question/29102331

#SPJ11

The pH of the final solution is approximately 4.76. We know from part a that the buffer solution has a concentration of 0.100 M acetic acid and 0.100 M sodium acetate. This means that the total concentration of the buffer is 0.200 M (0.100 M + 0.100 M).

When we dilute the buffer solution to 1.00 L, we maintain the same concentration of 0.200 M. This means that we have a total of 0.200 moles of buffer in the 1.00 L solution.

Next, we take 500 mL (0.500 L) of the diluted buffer solution and add 0.0250 mol of hydrogen ions. This means that the new concentration of hydrogen ions in the solution is:

0.0250 mol / 0.500 L = 0.0500 M

To calculate the pH of the final solution, we need to determine the new concentrations of acetic acid and acetate ions in the solution. We can use the Henderson-Hasselbalch equation to do this:

pH = pKa + log([A⁻] / [HA])

where pKa is the dissociation constant of acetic acid (4.76), [A⁻] is the concentration of acetate ions, and [HA] is the concentration of acetic acid.

We know that the initial concentrations of acetic acid and acetate ions were both 0.100 M. However, the addition of hydrogen ions will shift the equilibrium of the buffer solution towards the formation of more acetic acid. This means that the concentration of acetic acid will increase and the concentration of acetate ions will decrease.

To calculate the new concentrations of acetic acid and acetate ions, we can use the following equations:

[H+] = 0.0500 M
Ka = 10^-pKa = 1.75 x 10⁻⁵

Let x be the amount of acetic acid that reacts with the added hydrogen ions. Then, the new concentrations of acetic acid and acetate ions are:

[HA] = 0.100 M + x
[A-] = 0.100 M - x

The equilibrium expression for the dissociation of acetic acid is:

Ka = [H⁺][A⁻] / [HA]

Substituting in the values for Ka, [H⁺], [A⁻], and [HA], we get:

1.75 x 10⁻⁵ = (0.0500 M)(0.100 M - x) / (0.100 M + x)

Simplifying this equation and solving for x, we get:

x = 1.29 x 10⁻⁴ M

Therefore, the new concentrations of acetic acid and acetate ions are:

[HA] = 0.100 M + 1.29 x 10⁻⁴ M = 0.100129 M
[A-] = 0.100 M - 1.29 x 10⁻⁴ M = 0.099871 M

Now, we can use the Henderson-Hasselbalch equation to calculate the pH of the final solution:

pH = pKa + log([A⁻] / [HA])
pH = 4.76 + log(0.099871 / 0.100129)
pH = 4.76 - 0.000258
pH = 4.7597

Therefore, the pH of the final solution is approximately 4.76.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

1) For the given conditions, the PV module voltage (Vmodule) is 17.28 V, the current (Imodule) is 3.07 A, and the power (Pmodule) is 53.09 W.
2) To determine the maximum power point of the entire PV module, you'll need to input the calculated Imodule and Vmodule values into the provided spreadsheet and observe the resulting maximum power point.


1) Since the cells are wired in series, the total diode voltage (Vt) for the module is 36 cells * 0.48 V/cell = 17.28 V. To find the current (Imodule), use the equation Imodule = Isc - (I * (exp((Vt + Imodule * Rs)/Rp) - 1)).

Solve for Imodule, which is approximately 3.07 A. Now, calculate the power (Pmodule) using Pmodule = Vmodule * Imodule, which gives 53.09 W.

2) To find the maximum power point of the PV module, input the calculated Imodule (3.07 A) and Vmodule (17.28 V) values into the provided spreadsheet.

Observe the resulting maximum power point on the graph or by analyzing the output data. This will give you the maximum power point of the entire PV module.

Learn more about diode here:

https://brainly.com/question/26540960

#SPJ11

If the rate of consumption of NH3 is given by the expression [tex]$-\frac{d[NH_3]}{dt}$[/tex], then the rate of formation of N2 would be [tex]$(\frac{1}{2})\cdot \frac{d[N_2]}{dt}$[/tex].

For the given reaction, we want to determine the rate of formation of N2, which is the product of the reaction.

The rate of formation of N2 can be related to the rate of consumption of NH3, which is one of the reactants. To do this, we need to use the stoichiometry of the reaction to determine the appropriate conversion factor.

From the balanced chemical equation, we can see that 2 moles of NH3 react to form 1 mole of N2. Therefore, the rate of formation of N2 is related to the rate of consumption of NH3 by a factor of 1/2.

To see why this is the case, consider the following: if we start with a certain rate of consumption of NH3, then this will result in a corresponding rate of formation of N2, which is half of the rate of consumption of NH3. This is because for every 2 moles of NH3 consumed, only 1 mole of N2 is formed, as per the stoichiometry of the reaction.

Therefore, to get the rate of formation of N2, we need to multiply the rate of consumption of NH3 by 1/2. In other words, if the rate of consumption of NH3 is given by the expression [tex]$-\frac{d[NH_3]}{dt}$[/tex], then the rate of formation of N2 would be [tex]$(\frac{1}{2})\cdot \frac{d[N_2]}{dt}$[/tex].

In summary, to relate the rate of formation of N2 to the rate of consumption of NH3 for the given reaction, we need to use the stoichiometry of the reaction and multiply the rate of consumption of NH3 by a factor of 1/2.

To lear more about  rate of consumption refer here:

https://brainly.com/question/3139415

#SPJ11

The value of Ka for the acid [ha] is 2.07×[tex]10^{-4}[/tex].

The equilibrium constant, Ka, is a measure of the extent to which an acid dissociates in water. It is defined as the ratio of the concentrations of the products to the concentrations of the reactants in the equilibrium expression. In this case, we are given the equilibrium concentrations of ha, a-, and [tex]H3_0[/tex]+ as [ha] = 1.33 m, [a-] = 0.0166 m, and [[tex]H3_0[/tex]+] = 0.0166 m.

The equilibrium expression for the dissociation of HA can be written as follows:

HA ⇌ A- + [tex]H3_0[/tex]+

The concentrations given represent the equilibrium concentrations of the species involved in the reaction. Using these values, we can determine the value of Ka.

Ka = ([A-] * [[tex]H3_0[/tex]+]) / [HA]

Substituting the given values, we get:

Ka = (0.0166 * 0.0166) / 1.33

Simplifying the expression, we find that Ka ≈ 2.07×10^(-4).

Learn more about acid

brainly.com/question/29796621

#SPJ11

the molar solubility of BaF2 in a solution containing 0.0750 M LiF, we need to use the common ion effect. The addition of LiF to the solution will increase the concentration of F- ions, which will shift the equilibrium of BaF2 towards the solid state, reducing its solubility.

Let x be the molar solubility of BaF2 in the presence of 0.0750 M LiF. Then, the concentrations of Ba2+ and F- ions in the solution will be:[Ba2+] = x [F-] = 2x + 0.0750 M


Substituting these expressions into the Ksp expression, we get:Ksp = x(2x + 0.0750 M)^2 = 1.7 × 10^-6.Expanding and simplifying this expression, we get a quadratic equation in x: 4x^3 + 0.45x^2 + 0.0016875x - 8.5 × 10^-8 = 0

To know more about molar visit:

https://brainly.com/question/8732513

#SPJ11

For each of the reactions, the net ionic equations and the molecular equations have been given, together with a list of all the phases.

A. 2HCl(aq) + Ni(s) NiCl2(aq) + H2(g) is the balanced molecular equation for the reaction between hydrochloric acid and nickel.

This reaction's net ionic equation is 2H+(aq) + Ni(s) Ni2+(aq) + H2(g)

B. Fe(s) + H2SO4(aq) FeSO4(aq) + H2(g) is the balanced chemical equation for the reaction of diluted sulfuric acid with iron.

Fe(s) (solid) is one of the substances' phases.

aqueous H2SO4 (aq)

FeSO4 (aq) (water)

H2(g) (gas)

This reaction's balanced net ionic equation is Fe(s) + H+(aq) Fe2+(aq) + H2(g)

C. The chemical reaction involving magnesium and hydrobromic acid has the following balanced equation:

Mg(s) + 2HBr(aq) = MgBr2(aq) + H2(g)

The chemicals come in the following phases: 2HBr(aq) (aqueous).

Magnesium (solid)

MgBr2(aq) (water-based)

H2(g) (gas)

This reaction's balanced net ionic equation is 2H+(aq) + Mg(s) Mg2+(aq) + H2(g)

D. Acetic acid reacting with zinc results in the chemical equation 2CH3COOH(aq) + Zn(s) Zn(CH3COO)2(aq) + H2(g)

The chemicals exist in two phases: 2CH3COOH(aq) (aqueous) and Zn(s) (solid).

Zn(CH3COO)aqueous 2(aq)

H2(g) (gas)

For this reaction, the balanced net ionic equation is 2H+(aq) + Zn(s) Zn2+(aq) + H2(g) + 2CH3COO-(aq).

For each of the reactions, the net ionic equations and the molecular equations have been given, together with all of the phases' names.

To know more about hydrochloric acid visit :

https://brainly.com/question/22469941

#SPJ11

The amount of carbon-14 remaining in charred plant remains from the 472 AD eruption was 0.57 ppt, and the amount remaining from the 512 AD eruption was 0.59 ppt, both calculated using the radioactive decay equation and assuming an initial amount of carbon-14 equal to the present-day level.

To calculate the amount of carbon-14 (n) in charred plant remains for the two different eruptions of Mt. Vesuvius in 472 AD and 512 AD, we need to use the radioactive decay equation:

n = n0 (1/2)^(t/T)

Where n0 is the initial amount of carbon-14, t is the time elapsed since the eruption (in years), T is the half-life of carbon-14 (5730 years), and n is the amount of carbon-14 remaining.

For the 472 AD eruption, we can assume that the charred plant remains had an initial amount of carbon-14 equal to the present-day level, which is 1 part per trillion (1 ppt). Thus, n0 = 1 ppt.

To calculate n, we need to know how much time has passed since the eruption. In 2008, the time elapsed since 472 AD is 2008 - 472 = 1536 years. Plugging in these values into the equation, we get:

n = 1 ppt * (1/2)^(1536/5730) = 0.57 ppt

Therefore, in 2008, the amount of carbon-14 remaining in the charred plant remains from the 472 AD eruption was 0.57 parts per trillion.

For the 512 AD eruption, we can use the same approach. Assuming an initial amount of carbon-14 equal to the present-day level (1 ppt), the time elapsed since the eruption in 2008 is 2008 - 512 = 1496 years. Plugging in these values into the equation, we get:

n = 1 ppt * (1/2)^(1496/5730) = 0.59 ppt

Therefore, in 2008, the amount of carbon-14 remaining in the charred plant remains from the 512 AD eruption was 0.59 parts per trillion.

In summary, the amount of carbon-14 remaining in charred plant remains from the 472 AD eruption was 0.57 ppt, and the amount remaining from the 512 AD eruption was 0.59 ppt, both calculated using the radioactive decay equation and assuming an initial amount of carbon-14 equal to the present-day level.

To know more about carbon-14, refer

https://brainly.com/question/15673495

#SPJ11

The hydronium ion concentration of a 0.012 M aniline solution is 2.08 × 10⁻⁶ M.

The equation for the ionization of aniline is;

C₆H₅NH₂ + H₂O ⇌ C₆H₅NH₃⁺ + OH⁻

The equilibrium expression for the above reaction is;

Kb = ([C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]

Since aniline is a weak base, we can assume that the amount of hydroxide ion produced is negligible compared to the amount of the weak base present in the solution. Therefore, we can simplify the expression as follows;

Kb =[C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]

≈[C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]

where [C₆H₅NH₂]0 is the initial concentration of aniline.

Since we are given [C₆H₅NH₂]0 = 0.012 M, we can use the above equation to calculate [C₆H₅NH₃⁺];

Kb =[C₆H₅NH₃⁺][OH⁻])/[C₆H₅NH₂]0

4.0 × 10⁻¹⁰ = [C₆H₅NH₃⁺][OH⁻]/0.012

[C₆H₅NH₃⁺] = (4.0 × 10⁻¹⁰) × 0.012 / [OH⁻]

Since water is neutral, [H₃O⁺] = [OH⁻]. Therefore,

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴

[H₃O⁺] = [OH⁻] = Kw / [OH⁻]

= 1.0 × 10⁻¹⁴ / [OH-]

Substituting [OH-] = [C₆H₅NH₃⁺] into the above equation, we get:

[H₃O⁺] = 1.0 × 10⁻¹⁴ / [C₆H₅NH₃⁺]

[H₃O⁺] = 1.0 × 10⁻¹⁴ / [(4.0 × 10⁻¹⁰) × 0.012 / [OH⁻]]

[H₃O⁺] = 2.08 × 10⁻⁶ M

Therefore, the hydronium ion concentration is 2.08 ×  10⁻⁶ M.

To know more about hydronium ion concentration here

https://brainly.com/question/13387755

#SPJ4

Hydronium ion concentration of a 0.012 M aniline solution is 3.2 x 10^-6 M. This can be calculated using the Kb value of aniline and the equilibrium expression for the reaction of aniline with water to form the anilinium ion and hydroxide ion.

Aniline is a weak base that reacts with water to form the anilinium ion (C6H5NH3+) and hydroxide ion (OH-), according to the following equilibrium reaction:

C6H5NH2 + H2O ⇌ C6H5NH3+ + OH-

The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 4.0 x 10^-10.

Using the Kb value and the initial concentration of aniline (0.012 M), we can calculate the concentration of hydroxide ions (OH-) at equilibrium using the following expression:

Kb = [C6H5NH3+][OH-] / [C6H5NH2]

Since aniline is a weak base, we can assume that the initial concentration of anilinium ion is negligible compared to the initial concentration of aniline, and hence the concentration of anilinium ion can be ignored in the equilibrium expression.

Rearranging the above equation to solve for [OH-], we get:

[OH-] = (Kb x [C6H5NH2]) / [C6H5NH3+]

Substituting the values, we get:

[OH-] = (4.0 x 10^-10 x 0.012) / [C6H5NH3+]

To solve for [C6H5NH3+], we can use the fact that the sum of the concentrations of hydroxide and hydronium ions in water is equal to the ion product of water, Kw, which is 1.0 x 10^-14.

[H3O+] [OH-] = Kw

Since the aniline solution is dilute, we can assume that the contribution of hydronium ion from the water is negligible, and hence we can assume that:

[H3O+] = [OH-]

Substituting the value of [OH-], we get:

[H3O+] = (1.0 x 10^-14) / [OH-] = 3.2 x 10^-6 M.

Therefore, the hydronium ion concentration of a 0.012 M aniline solution is 3.2 x 10^-6 M.

learn more about hydronium here:

https://brainly.com/question/29286376

#SPJ11

The △G∘' for the reaction fructose-6-phosphate → glucose-6-phosphate at 37 ∘C is -1708.3 J/mol.

To calculate the △G∘' for the reaction fructose-6-phosphate → glucose-6-phosphate, we need to use the equation △G∘' = -RT ln K, where R is the gas constant (8.314 J/K·mol), T is the temperature in Kelvin (37+273=310 K), and K is the equilibrium constant (1.97).

Plugging in the values, we get:
△G∘' = -8.314 J/K·mol × 310 K × ln(1.97)
△G∘' = -8.314 J/K·mol × 310 K × 0.677
△G∘' = -1708.3 J/mol

Therefore, the △G∘' for the reaction fructose-6-phosphate → glucose-6-phosphate at 37 ∘C is -1708.3 J/mol. Note that the unit for △G∘' is J/mol, which represents the change in free energy per mole of the reaction.

For more such questions on fructose

https://brainly.com/question/632587

#SPJ11

The ΔG∘' for the reaction fructose-6-phosphate → glucose-6-phosphate is -1.99 kJ/mol at 37°C.

Explanation:

The standard free energy change (ΔG∘') for a reaction can be calculated using the equation:

ΔG∘' = -RTln(K),

where R is the gas constant (8.314 J/K·mol), T is the temperature in Kelvin (37°C + 273.15 = 310.15 K), and K is the equilibrium constant (1.97).

Plugging in these values, we get:

ΔG∘' = -8.314 J/K·mol x 310.15 K x ln(1.97)

ΔG∘' = -1.99 kJ/mol

The negative sign indicates that the reaction is exergonic, meaning it releases energy. The units of ΔG∘' are in kJ/mol, which represents the amount of free energy released per mole of reactant converted to product under standard conditions.

learn more about phosphate here:

https://brainly.com/question/30500750

#SPJ11

The mass of scheelite ([tex]CaWO_4[/tex]) containing a trillion [tex](1.000*10^1^2)[/tex] oxygen atoms is calculated to be approximately 91.26 grams.

To calculate the mass of scheelite ([tex]CaWO_4[/tex]) containing a trillion oxygen atoms, we need to consider the molar mass of the compound and the ratio of oxygen atoms in its chemical formula. The molar mass of [tex]CaWO_4[/tex]can be calculated by adding the atomic masses of calcium (Ca), tungsten (W), and four oxygen (O) atoms.

The atomic masses of Ca, W, and O are approximately 40.08 g/mol, 183.84 g/mol, and 16.00 g/mol, respectively. Adding these masses gives us a molar mass of 287.92 g/mol for [tex]CaWO_4[/tex].

Next, we need to find the number of moles of oxygen atoms in one trillion ([tex]1.000*10^1^2[/tex]) oxygen atoms. Since there are four oxygen atoms in one mole of [tex]CaWO_4[/tex], we can divide the given number of oxygen atoms by Avogadro's number [tex](6.022*10^2^3)[/tex] and then divide by four to find the number of moles of [tex]CaWO_4[/tex].

[tex]1.000*10^1^2 / (6.022*10^2^3) / 4 = 2.085*10^-^1^1 moles[/tex]

Finally, we can calculate the mass of [tex]CaWO_4[/tex] by multiplying the number of moles by the molar mass:

[tex]2.085*10^-^1^1 moles * 287.92 g/mol = 5.995*10^-^9 grams[/tex]

Rounded to four significant digits, the mass of scheelite containing a trillion oxygen atoms is approximately 91.26 grams.

Learn more about oxygen atoms here:

https://brainly.com/question/7716347

#SPJ11

The radioactive decay processes for the final two steps in the decay chain for uranium-238 are: Alpha emission followed by beta emission. The correct option to this question is A.

1. Bismuth-210 undergoes alpha emission, where it emits an alpha particle (consisting of 2 protons and 2 neutrons) and transforms into polonium-210:

  Bismuth-210 → Polonium-210 + α (alpha particle)

2. Polonium-210 undergoes beta emission, where it emits a beta particle (an electron) and transforms into the stable isotope lead-206:

  Polonium-210 → Lead-206 + β (beta particle)

The final two steps in the decay chain for uranium-238 involve alpha emission from bismuth-210 followed by beta emission from polonium-210, leading to the formation of the stable isotope lead-206.

For more information on radioactive decay kindly visit to

https://brainly.com/question/14040931

#SPJ11

To determine the approximate number of atoms of copper present in one mole of copper, we need to use Avogadro's number, that one mole of substance contains 6.022 × 10^23 entities (atoms, molecules, or ions).

Given that one mole of copper has a mass of 63.5 grams, which corresponds to the molar mass of copper (Cu), we can use this information to calculate the number of moles of copper.

Number of moles of copper = Mass of copper / Molar mass of copper

Number of moles of copper = 63.5 g / 63.5 g/mol = 1 mol

Since one mole of any substance contains Avogadro's number of entities, one mole of copper will contain approximately 6.022 × 10^23 atoms of copper. Therefore, approximately 6.022 × 10^23 atoms of copper are present in one mole of copper.

A mole is the amount of a substance that has the same number of particles (Avogadro's number, which is 6.022 * 1023) as are present in 12.000 grammes of carbon-12 of the substance. A mole can contain any number of atoms, molecules, or ions.

Learn more about mole of substance here

https://brainly.com/question/16677981

#SPJ11

To calculate the standard cell potential (E°cell) for the galvanic cell with copper and cadmium electrodes, we need to find the half-reactions involving these metals and their respective standard reduction potentials.

The half-reactions involved are:

Copper (Cu2+ + 2e− ⟶ Cu) with E° = +0.337 V

Cadmium (Cd2+ + 2e− ⟶ Cd) with E° = -0.4030 V

The standard cell potential (E°cell) can be calculated by subtracting the reduction potential of the anode (where oxidation occurs) from the reduction potential of the cathode (where reduction occurs):

E°cell = E°cathode - E°anode

The copper electrode is the cathode and the cadmium electrode is the anode. Let's calculate E°cell:

E°cell = E°cathode - E°anode

E°cell = (+0.337 V) - (-0.4030 V)

E°cell = 0.337 V + 0.4030 V

E°cell = 0.740 V

Therefore, the standard cell potential (E°cell) for the galvanic cell with copper and cadmium electrodes is 0.740 V.

Learn more about standard cell potential here ;

https://brainly.com/question/32137450

#SPJ11

The amount of heat energy evolved during the formation 98.7 g of Fe according to the reaction is -754.02 KJ

First, we shall obtain the mole of 98.7 g of Fe. Details below:

Mole = mass / molar mass

Mole of Fe = 98.7 / 55.85

Mole of Fe = 1.77 moles

Finally, we shall obtain the heat energy evolved. Details below:

Fe₂O₃(s) + 2Al(s) --> Al₂O₃(s) + 2Fe(s) ΔH = -852 KJ/mol

From the balanced equation above,

When 2 moles of Fe were produced, -852 KJ of heat energy were evolved.

Therefore,

When 1.77 moles of Fe will be produce = (1.77 × -852) / 2 = -754.02 KJ of heat energy will be evolved.

Thus, we can conclude that the heat energy evolved is -754.02 KJ

Learn more about heat energy evolved:

https://brainly.com/question/31429264

#SPJ4

BrO3- + 3N2H4 ⟶ Br- + 3N2 + 6H2O Assign oxidation numbers to all elements in the reaction.

BrO3-: Br = +5, O = -2

N2H4: N = -2, H = +1

Br-: Br = -1

N2: N = 0

2. Determine which elements are being oxidized and reduced.

Br is being reduced from +5 to -1.

N is being oxidized from -2 to 0.

3. Balance the non-hydrogen and non-oxygen elements first.

We balance Br by adding 5 electrons to the right-hand side:

[tex]BrO3- + 5e- + 3N2H4 ⟶ Br- + 3N2 + 6H2O[/tex]

4. Balance oxygen by adding water molecules.

[tex]BrO3- + 5e- + 3N2H4 ⟶ Br- + 3N2 + 6H2O[/tex]

5. Balance hydrogen by adding H+ ions.

[tex]BrO3- + 5e- + 3N2H4 + 4H+ ⟶ Br- + 3N2 + 6H2O[/tex]

6. Finally, balance the charges by adding electrons.

[tex]BrO3- + 5e- + 3N2H4 + 4H+ ⟶ Br- + 3N2 + 6H2O[/tex]

Learn more about  redox reactions here:

https://brainly.com/question/13293425

#SPJ11

The metal ion with a d5 electron configuration is B) Mn2+.

The d-block elements in the periodic table have partially filled d-orbitals, which can accommodate up to 10 electrons. In a d5 electron configuration, there are five electrons occupying the d-orbitals.

Among the given options, Fe2+ has a d6 configuration, Co3+ has a d6 configuration, and Fe3+ has a d5 configuration but with one fewer electron. Therefore, the correct answer is Mn2+, which has a d5 electron configuration with five electrons occupying its d-orbitals. So B is correct option.

For more questions like Electron click the link below:

https://brainly.com/question/1255220

#SPJ11

Which metal ion has a d5 electron configuration? A) Fe2+ B) Mn2+ C) Co3+ D) Fe3+ 2)

We can then plot the solubility (S) as a function of pH (which is related to [H⁺]) using a graphing calculator or software. The resulting plot should show a minimum in solubility around pH 8-9, corresponding to the point where the concentration of Al(OH)⁻⁴is equal to the concentration of Al⁺³. Above and below this pH range, the solubility will increase due to the formation of the Al(H2O)₆⁺³ complex ion in acidic solutions and the Al(OH)⁻⁴ complex ion in basic solutions.

a. In very acidic solutions, Al(OH)3(s) will react with excess H+ ions to form the soluble complex ion Al(H2O)6^3+. The equation for this reaction is:
Al(OH)₃(s) + 3H⁺ → Al(H2O)₆⁺³
In very basic solutions, Al(OH)3(s) will dissolve and react with excess OH- ions to form the soluble complex ion Al(OH)4^-. The equation for this reaction is:
Al(OH)₃(s) + OH- → Al(OH)⁻⁴
b. The solubility of Al(OH)₃, as a function of [H+], obeys the equation:
S = [H⁺]³ Ksp/Kw³+ K*Kw/[H⁺]
where S = solubility = [Al⁺³] + [Al(OH)⁻⁴], K is the equilibrium constant for the reaction Al(OH)3(s) ⇌ Al⁺³ + 3OH⁻, Ksp is the solubility product constant for Al(OH)₃, and Kw is the ion product constant for water.
c. To plot the solubility of Al(OH)₃ in the pH range 4-12, we can use the equation from part b and substitute the values of K, Ksp, and Kw:
S = [H⁺]³ (2 x 10⁻³²)/(1 x 10⁻¹⁴)³ + (40.0 x 1 x 10⁻¹⁴)/[H⁺]
Simplifying this equation, we get:
S = 2.0 x 10^-26 [H+]^3 + 40.0 x 10^-14/[H+]

Learn more about solubility here:
https://brainly.com/question/28170449

#SPJ11

The [tex]PbCl_{2}[/tex] dissolved when water was added in Step 10 because the concentrations of the ions decreased and the reaction shifted to the right to compensate.

When water is added to a system in equilibrium, it causes a change in the concentrations of the ions present.

In this case, the addition of water diluted the concentrations of [tex]Pb^{+2}[/tex] and [tex]Cl^{-}[/tex] ions, leading to a decrease in their concentrations.

According to Le Chatelier's Principle, when the concentration of the reactants or products changes, the system shifts in the direction that counteracts the change to re-establish equilibrium.

In this case, the decrease in ion concentrations caused the reaction to shift to the right, towards the products, in order to increase the concentrations of the ions and restore equilibrium.
The addition of water to the [tex]PbCl_{2}[/tex] system caused the concentrations of [tex]Pb^{+2}[/tex] and [tex]Cl^{-}[/tex] ions to decrease, leading to a shift in the reaction towards the right to compensate for the change and re-establish equilibrium.

For more information on Le Chatelier's principle kindly visit to

https://brainly.com/question/29009512

#SPJ11

The exposure of 2-methyl-2-butene to oxymercuration-demercuration conditions provides C) 2-methyl-2-butanol as the product.

Oxymercuration-demercuration involves the addition of a mercuric acetate (Hg(OAc)2) and water to an alkene, followed by the reduction of the intermediate mercurinium ion with sodium borohydride (NaBH4). In the case of 2-methyl-2-butene, the addition of Hg(OAc)2 and water to the double bond will result in the formation of a stable mercurinium ion intermediate. Subsequent reduction with NaBH4 will produce 2-methyl-2-butanol as the final product.

Learn more about butanol here:

https://brainly.com/question/1358729

#SPJ11

The total volume of gas produced by the complete decomposition of 1.44 kg k g of ammonium nitrate is 33.5 L.

The decomposition reaction of ammonium nitrate is given by:

NH4NO3(s) → N2(g) + 2H2O(g)

From the balanced chemical equation, we can see that 1 mole of ammonium nitrate produces 1 mole of nitrogen gas and 2 moles of water vapor. The molar mass of NH4NO3 is 80.04 g/mol, so 1.44 kg of NH4NO3 is equal to 18 moles.

To find the volume of gas produced, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin:

T = 127°C + 273.15 = 400.15 K

Next, we need to convert the pressure from mmHg to atm:

747 mmHg / 760 mmHg/atm = 0.981 atm

Now we can plug in the values and solve for V:

V = nRT/P = (1 mole N2)(0.08206 L·atm/mol·K)(400.15 K)/0.981 atm

= 33.5 L

Therefore, the total volume of gas produced by the complete decomposition of 1.44 kg of ammonium nitrate at 127°C and 747 mmHg is 33.5 L.

For more questions on ammonium nitrate:

https://brainly.com/question/13678113

#SPJ11

The total volume of gas produced by the complete decomposition of 1.44 kg of ammonium nitrate at 127°C and 747 mmHg is 960.4 L.

Explanation: To solve this problem, we need to use the ideal gas law, PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. We can first find the number of moles of gas produced by calculating the amount of ammonium nitrate in moles (1.44 kg divided by the molar mass of NH4NO3), then multiplying by the stoichiometric ratio of gas produced per mole of ammonium nitrate (2 moles of gas per mole of NH4NO3).

Next, we can use the given temperature and pressure to convert the number of moles of gas into volume using the ideal gas law. It's important to note that the given temperature is in Celsius, so we need to convert it to Kelvin by adding 273.15. After plugging in the values and solving for V, we get a total volume of 960.4 L.

Learn more about ammonium nitrate here :

brainly.com/question/13678113

#SPJ11

Answer:

A. Yes.

Explanation:

“Real” golf balls (the kind you play a round of golf with) sink because they are denser than water. “Fake” golf balls (the kind you use at a mini-golf course) float because they are hollow and thus, less dense than the water they're floating on.

If a noble gas is compressed from 0.5 atm to 2 atm and its temperature is below its boiling point at 2 atm, it will likely remain in the gaseous state. However, if its temperature is above its boiling point at 2 atm, it may undergo a phase change and condense into a liquid or solid state.

If a noble gas is compressed from 0.5 atm to 2 atm, its phase change will depend on its initial state and the temperature at which the compression occurs.

Noble gases such as helium, neon, argon, krypton, and xenon are typically found in the gaseous state at room temperature and atmospheric pressure. At low temperatures and/or high pressures, these gases may undergo a phase change and condense into a liquid or solid state.

For example, helium has a boiling point of -268.9°C at atmospheric pressure, and can be liquified at temperatures below this point and pressures above about 25 atm. Neon has a similar boiling point of -246.1°C, and can be liquified at pressures above about 27 atm.

Therefore, if a noble gas is compressed from 0.5 atm to 2 atm and its temperature is below its boiling point at 2 atm, it will likely remain in the gaseous state. However, if its temperature is above its boiling point at 2 atm, it may undergo a phase change and condense into a liquid or solid state.

Learn more about compression at: https://brainly.com/question/12644965

#SPJ11

When the lid accidentally slips over the crucible and completely seals it, it means that the water vapor that is supposed to escape during the heating process is now trapped inside the crucible. This will lead to an increase in the measured mass of the hydrate.

Specifically, the calculated percent water of hydration will be higher than the actual value. This is because the trapped water will increase the measured mass of the sample, leading to a higher calculated mass of water present in the hydrate. Since the percent water of hydration is calculated as the mass of water divided by the total mass of the hydrate, the higher measured mass will result in a higher calculated percent water of hydration.


Overall, the accidental sealing of the crucible lid will have a significant impact on the calculated experimental results and the accuracy of the percent water of hydration. It is important to be careful and precise when performing laboratory experiments to minimize the potential for errors and ensure accurate results.

To know more about hydrate visit :-

https://brainly.com/question/11202174

#SPJ11

Aluminum nitride (AlN) undergoes a thermal decomposition reaction, which results in the formation of aluminum metal (Al) and nitrogen gas (N2). This process involves the breaking of chemical bonds in AlN due to heat, releasing the individual elements as products.

When aluminum nitride (AIN) is heated, it undergoes a thermal decomposition reaction, meaning it breaks down into simpler components.

In this case, the AIN breaks down into aluminum metal and nitrogen gas. The reaction can be represented by the following equation:

AIN → Al + N2

The decomposition process requires a significant amount of energy, typically in the form of heat, to overcome the chemical bonds holding the AIN together.

Once the bonds are broken, the aluminum and nitrogen atoms can recombine into their respective elements.

This reaction is important in the production of aluminum and nitrogen gas, as AIN is a source of both materials.

To know more about thermal decomposition, click below.

https://brainly.com/question/14949019

#SPJ11

The energy contained in a single pulse of green light (525 nm) with 0.851 moles of photons is 1.95 x 10^4 J.

The energy of a single photon is given by the equation:

E = hc/λ

where h is Planck's constant, c is the speed of light, and λ is the wavelength of the light. We can use this equation to find the energy of a single photon of green light:

E = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s)/(525 x 10^-9 m) = 3.776 x 10^-19 J

This means that each photon of green light has an energy of 3.776 x 10^-19 J.

To find the total energy contained in the laser pulse, we can multiply the number of photons by the energy per photon:

Energy = (0.851 moles)(6.022 x 10^23 photons/mole)(3.776 x 10^-19 J/photon) = 1.95 x 10^4 J

For more question on energy click on

https://brainly.com/question/5650115

#SPJ11

The pH of the solution can be calculated using the equation: pH = 14 - log10([OH-]), where [OH-] is the hydroxide ion concentration. In this case, we need to find the concentration of OH- ions.

C6H5NH2 is an organic base that reacts with water to form OH- ions. The balanced equation for this reaction is:

[tex]C6H5NH2 + H2O ⇌ C6H5NH3+ + OH-[/tex]

Given that the concentration of C6H5NH2 is 7.22 × 10^(-4) M and the equilibrium constant, Kb, is 3.8 × 10^(-10), we can use the equation for Kb to determine the concentration of OH- ions:

Kb = [C6H5NH3+][OH-]/[C6H5NH2]

Since the concentration of C6H5NH3+ is negligible compared to C6H5NH2, we can approximate it as zero. Therefore:

Kb ≈ [OH-]²/[C6H5NH2]

Rearranging the equation, we find:

[OH-] ≈ sqrt(Kb × [C6H5NH2])

Plugging in the values, we get:

[OH-] ≈ sqrt(3.8 × 10^(-10) × 7.22 × 10^(-4))

Calculating this value gives us the concentration of OH- ions. Finally, we can use the pH equation mentioned earlier to find the pH of the solution.

To calculate the pH of the solution, we first need to find the concentration of OH- ions, which are produced when C6H5NH2 reacts with water. By using the equilibrium constant, Kb, and the concentration of C6H5NH2, we can determine the concentration of OH- ions. This is done by solving the Kb expression and finding the square root of the product of Kb and [C6H5NH2]. With the concentration of OH- ions known, we can apply the pH equation (pH = 14 - log10([OH-])) to calculate the pH value of the solution.

Learn more about pH  here:

https://brainly.com/question/491373

#SPJ11