Arrange the following bonds in order of increasing ionic character. assign number 1 as the highest and 6 as the lowest. a. carbon-hydrogen
b. fluorine-hydrogen
c. bromine-hydrogen
d. sodium-chlorine
e. potassium-fluorine
f. lithium-chlorine

The new volume of the gas in the balloon when the pressure is doubled is determined as 11.2 L.

The new volume of the balloon is determined by applying general gas equation as shown below

P₁V₁/T₁ = P₂V₂/T₂

Where;

[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\\\V_2 = \frac{P_1V_1T_2}{T_1P_2} \\\\V_2 = \frac{1 \times 22.4 \times 273}{273 \times 2} \\\\V_2 = 11.2 \ L[/tex]

Thus, the new volume of the gas in the balloon when the pressure is doubled is determined as 11.2 L.

Learn more about general gas equation here: https://brainly.com/question/4147359

Answer:A single-replacement reaction is a chemical reaction in which one element replaces another in a compound. F₂ + 2NaCl → 2NaF + Cl₂, where F replaces Cl in NaCl. A double-replacement reaction is a reaction in which the metals in two ionic compounds exchange partners.

A 120g block of pinewood has a volume of 300cm3. Would this block float on water? (HINT: Water has a density of 1g/cm3). a. No, because the block is denser than water.

Also here's a free meme

The density of a material represents the denseness of that material in a specific given area. If an object has a density less than water then it will float on water otherwise it will sink. Here the wood will float on water.

The density of a material denotes the measurement which compares the amount of matter an object has to its volume. An object with more matter in a certain volume has a high density. It is defined as the mass per unit volume.

The density is usually represented by symbol ρ or by the letter D. The formula used to calculate the density is:

Density = Mass / Volume

D = 100 / 300 = 0.33 g/cm³

Here the density of water is 1.0 g/cm³ which is greater than the density of  pine wood. So the pine wood will float on water.

To know more about density, visit;

https://brainly.com/question/29775886

#SPJ2

Answer:

Battery

Explanation:

The battery supplies the electricity needed for the circuit to work.

Answer:

Its because Hitler thought that there beliefs were trasha dn thought that these humans were worthless so he went out of his way to "DEHUMANIZE" them.

Explanation:

The fruit which has the greater mass is peach i.e. 150 grams.

Mass is a quantity which is used to define that what amount of substance will occupy any space or present in the given object.

We have given,

Weight of apples = 85,000 mg

Weight of peach = 0.15 kg

To compare the quantity first we have to convert both of these units in the same unit, and we know that:

In 1 kilogram = 1000 grams

And in 1 grams = 1000 milligrams

So, we convert both the units into grams as:

85,000 mg =  85,000 / 1000 = 85 grams

0.15 kg = 150 grams

So, the mass of peach is high.

Hence, peach has the greater mass.

To know more about mass, visit the below link:

https://brainly.com/question/15526412

Answer:

Constance has an apple that weighs 85,000 milligrams and a peach that weighs 0.15 kilograms. Which fruit has the greater mass? Choose the words and numbers to complete the statements.

Convert the masses of both fruits to the same unit.

85,000 milligrams is the same as  

85

 grams.

0.15 kilograms is the same as  

150

 grams.

The  

peach

 has the greater mass.tion:

Answer:

stuff around the earth

Explanation:

like water,fire,wind,and earth/plants

Answer:

The aspirin is more soluble in ethanol than water - the water helps the crystals separate from solution.

Explanation:

Hope this helps!

The shorthand equation shows us in a glance what happens in the electrochemical reaction. For a lead storage battery, we have; PbSO4(s)/H2O//Pb (s) ,PbO2(s) /H2SO4

An electrochemical reaction is one in which electrical energy is produced from a chemical reaction. The equations in a lead storage battery are;

Anode: Pb (s) + HSO4- → PbSO4(s) + H+ + 2 e-

Cathode: PbO2(s) + HSO4- + 3 H+ + 2 e- → PbSO4(s) + 2 H2O

Overall: Pb (s) + PbO2(s) + 2 HSO4- + 2 H+ → 2 PbSO4(s) + 2 H2O

Hence, the shorthand notation of this reaction is;

PbSO4(s)/H2O//Pb (s) ,PbO2(s) /H2SO4

Learn more about electrochemical reaction: https://brainly.com/question/7484696

Answer:

Single replacement is a reaction in which one element reacts with another compund to form another compound and another element.

planation:

If the reaction is double displacement then two molecules will be displaced and if it is single displacement reaction then only one element displaces.

Displacement reactions are those reactions in which any element of the given reactant will be displaced by any another element.

If only one element from the reactant molecules will displace then it will be known as single displacement reaction. If two elements or atoms will be displaced from the reactant molecules then it will be known as double displacement reaction.

Hence if one element displaceed then called the single displacement reaction and if two elements displaces then called as the double displacement reaction.

To know more about displacement reactions, visit the below link:

https://brainly.com/question/13328989

Answer:

they include pretty aurora as well as hazards

Answer:

The reaction between zinc sulphide and oxygen gives zinc oxide and sulfur dioxide. The chemical equation of the reaction is: 2ZnS + 3O2 → 2ZnO + 2SO2 2 moles of ZnS react with 3 moles of O2 to form 2 moles of ZnO and 2 moles of SO2

Explanation:

Answer:

Lithium has high melting and boiling point due to its small size, due to which it possesses high ionisation energy. As a result the binding energy in its crystal lattice is very high. This is why lithium has high melting and boiling point.

Explanation:

I HOPE IT HELPS! THANX!!

STAY SAFE!!!

Bedrock is used in the construction of structures, the topsoil is important for the production of crops and the loss of fertile soil is known as desertification.

More on desertification can be found here: https://brainly.com/question/24255548

Answer:

1. Bedrock

2. Topsoil

3. Desertification

Explanation:

Assuming an ebullioscopic constant of 0.512 °C/m for the water, If you add 30.0g of salt to 3.75kg of water, the boiling-point elevation will be 0.140 °C and the boiling-point of the solution will be 100.14 °C.

Boiling-point elevation describes the phenomenon that the boiling point of a liquid will be higher when another compound is added, meaning that a solution has a higher boiling point than a pure solvent.

We will use the definition of molality.

b = mass solute / molar mass solute × kg solvent

b = 30.0 g / (58.44 g/mol) × 3.75 kg = 0.137 m

We will use the following expression.

ΔT = Kb × m × i

ΔT = 0.512 °C/m × 0.137 m × 2 = 0.140 °C

where

The normal boiling-point for water is 100 °C. The boiling-point of the solution will be:

100 °C + 0.140 °C = 100.14 °C

Assuming an ebullioscopic constant of 0.512 °C/m for the water, If you add 30.0g of salt to 3.75kg of water, the boiling-point elevation will be 0.140 °C and the boiling-point of the solution will be 100.14 °C.

Learn more about boiling-point elevation here: https://brainly.com/question/4206205

Neutralization reaction is the reaction that occur between acid and base.

Neutralization reaction is the reaction that take place between acid and base to produce salt and water. For examples HCl react with NaOH to produce NaCl and H2O

Therefore, Neutralization reaction is the reaction between acid and base.

The question is not complete but the option are gotten from another website.

Here are the options.

Learn more about neutralization from the link below.

https://brainly.com/question/4090568

For an object  1 m long with a 5 m ramp, You pull with 20 N of force, The weight of the object is mathematically given as

W= 5714.3 N

Generally, the equation for the weight   is mathematically given as

W = mg = F/Sinθ

W= 20/Sin0.2

W=20/ 0.0035

W= 5714.3 N

In conclusion, the weight of the object

W= 5714.3 N

Read more about Weight

https://brainly.com/question/11408596

A reagent is a compound that is used for the detection of the absence or presence of another substance.

Your information is incomplete as the available reagents aren't given. Therefore, an overview will be given.

Reagents are the integral part of a chemical reaction as they facilitate a reaction. A reagent is usually used tests.

Some typical examples of reagents include Tollens reagent, Fehling's reagent, Million's reagent, etc.

Learn more about reagents on:

https://brainly.com/question/5601219

The reagents that would be used to convert cyclohexanone to the following compound: hydrogen cyanide, potassium cyanide, and H₃O⁺, heat.

It is an organic compound with a chemical formula [tex]\rm (CH_2)_5 CO[/tex].

The cyclohexanone is used as Insecticides, paint and varnish remover, synthetic resins, etc.

It is not harmful to humans and animals, inhalation cause irritation.

Thus, the compound: hydrogen cyanide, potassium cyanide, and H₃O⁺, heat.

Learn more about cyclohexane

https://brainly.com/question/15593706

#SPJ4

Answer:

15.055 X 1023 atoms

Explanation:

hope clear

Answer:

This is because it is a physical change not a chemical change.

The pH of a solution of H₂SO₄ that has [H₃O⁺] is 5.45 × 10⁻⁵ M, is 4.26.

pH is define as the negative logarithm of the concentration of H⁺ or H₃O⁺ ions, and it is represented as:

pH = -log[H⁺]

Concentration of H₃O⁺ in H₂SO₄ solution = 5.45 × 10⁻⁵ M

pH of H₂SO₄ solution will be calculated as:

pH = -log(5.45 × 10⁻⁵)

pH = -(-4.26)

pH = 4.26

Hence required pH is 4.26.

To know more about pH, visit the below link:

https://brainly.com/question/522383

Answer:

4.26 is the answer

Explanation:

edge 2022

Answer:

Chemical formula of Oxygen is O2.

We know ,

1 mole of a substance contains 6.022×10^23, Avogadro’s Constat.

Here, Molar mass of O = 16u

And molar mass of O2 = 32u

And 32g of O2 = 1 mole of O2

It means that,

32g of O2 = 6.022×10^23 molecules

Answer:

The correct answer is given in the picture

This ANSWER IS ONLY CORRECT WHEN Oz STAND FOR OZONE

Answer:

b atoms

Explanation:

everything is made up of atoms

Answer: polar molocule

Explanation:

The mass of sulfurous acid produced when 245g of sulfur dioxide is reacted with water is 313.8 g

From the question, we are to determine the mass of sulfurous acid produced

First, we will write the balaced chemical equation for the reaction

H₂O + SO₂ → H₂SO₃

This means 1 mole of H₂O reacts with 1 mole of sulfur dioxide (SO₂) to produce 1 mole of sulfurous acid (H₂SO₃)

Now, we will determine the number of moles of sulfur dioxide present

Mass of sulfur dioxide present = 245 g

Molar mass of sulfur dioxide = 64.066 g/mol

Using the formula,

[tex]Number \ of \ moles = \frac{Mass}{Molar\ mass}[/tex]

Then,

Number of moles of SO₂ present = [tex]\frac{245}{64.066}[/tex]

Number of moles of SO₂ present = 3.824 moles

This is the number of moles of SO₂ present

From balanced chemical equation

1 mole of H₂O reacts with 1 mole of sulfur dioxide (SO₂) to produce 1 mole of sulfurous acid (H₂SO₃)

Then,

Water (H₂O) will react with the 3.824 moles of sulfur dioxide (SO₂) to produce 3.824 moles of sulfurous acid (H₂SO₃)

∴ The number of moles of sulfurous acid produced is 3.824 moles

Now, for the mass of sulfurous acid produced

Molar mass of sulfurous acid = 82.07 g/mole

Using the formula,

Mass = Number of moles × Molar mass

Mass of sulfurous acid produced = 3.824 × 82.07

Mass of sulfurous acid produced = 313.8 g

Hence, the mass of sulfurous acid produced is 313.8 g

Learn more on Stoichiometry here: https://brainly.com/question/6061451

The correct location of the given object on represents continental drift or seafloor spreading.

The scientist Alfred Wegener is most closely connected with the concept of continental drift. Wegener wrote a paper outlining his notion that the continents were “drifting” across the Earth, occasionally crashing through oceans and into one another, in the early 20th century.

The seafloor spreading is the increase of seawater covering the land area. The spreading of seawater is decreasing the land area.

Thus, the correct location is:

To learn more about continental drift, refer to the below link:

https://brainly.com/question/15122129

#SPJ6

The color of the system will change between pink and blue depending on the concentration of species.

Equilibrium is attained in a reaction when the rate of forward reaction is equal to the rate of reverse reaction. Now consider the equilibrium;

Co(H2O)6^2+(aq) + 4Cl^-(aq) ⇄ CoCl4^2-(aq) + 6H2O(l)

We know that Co(H2O)6^2+(aq) is pink while  CoCl4^2-(aq)  is blue hence, if the concentration of the species are changed, the color of the system will change accordingly.

Learn more about equilibrium: https://brainly.com/question/13524990?

Answer:

Medication

Explanation:

These pharmaceuticals can pollute our water and unintentionally expose us to the chemicals in these medications. Recent studies have found that medicines flushed down the drain can contaminate our lakes and streams, which can hurt fish and other aquatic wildlife, and end up in our drinking water.

A. Cold front

The warm front symbol would be red and have circles instead of triangles.

The occluded front symbol would be purple with both, a triangle and a circle.

The stationary Front symbol is a mixture of both symbols from cold front and warm front.

hope that helps!!