aqueous magnesium chloride is mixed with aqueous sodium phosphate.

Given the number of moles of carbon in the compound is 0.074 and the number of moles of oxygen is 0.148 moles. Convert these numbers to whole number ratios we get the empirical formula of the compound as CO₂.

The empirical formula of a compound is derived from the number of moles of the constituent elements of the compound. The mole ratio of the elements give  the subscripts in the formula.

Given,

number of moles of carbon in the compound = 0.074 moles

number of moles of oxygen = 0.148 moles

mole ratio of C to O is 0.074 : 0.148.

Divide both numbers by 0.074 to get whole numbers. we will obtain 1:2.

Hence, carbon and oxygen are in the ratio of  1:2 and the formula of the compound is CO₂.

Find more on empirical formula:

https://brainly.com/question/11588623

#SPJ1

The enthalpy change for the dissolution of SO3 in water to give H₂SO4 is -130 kJ/mol.

Enthalpy change (ΔH) is a thermodynamic quantity that represents the amount of heat energy absorbed or released in a chemical reaction or physical process at constant pressure.

The enthalpy change for the dissolution of SO3 in water to give H₂SO4 can be calculated using the equation: ΔH = ΔH products - ΔH reactants.

ΔH = (-811 kJ/mol) - [(−395 kJ/mol) + (-286 kJ/mol)] = -811 kJ/mol - (-681 kJ/mol) = -130 kJ/mol.

Therefore, the enthalpy change for the dissolution of SO3 in water to give H₂SO4 is -130 kJ/mol.

Learn more on enthalpy change here https://brainly.com/question/15174388

#SPJ1

The molarity of sodium ions is 0.118

Molarity (M) is the amount of a substance in a sure extent of solution. Molarity is described because the moles of a solute are in keeping with the liters of an answer. Molarity is also referred to as the molar concentration of an answer.

The molarity of a given solution is described as the overall quantity of moles of solute per liter of answer. The molality of an answer is depending on the adjustments in physical properties of the machine along with strain and temperature as unlike mass, the volume of the gadget adjusts with the change in bodily situations of the gadget. Molarity is represented through M, that's termed as molar. One molar is the molarity of a solution wherein one gram of solute is dissolved in a liter of answer.

To learn more about Molarity visit here:

brainly.com/question/26921570

#SPJ4

A 0.026 M KOH solution has [tex][OH-] = 0.026 M, [H3O+] = 10^(-13) M[/tex], and a pH of 12.97.

A potassium hydroxide (KOH) solution is a strong base and dissociates completely in water to produce hydroxide ions (OH-). The molar concentration of KOH can be used to calculate the concentration of hydroxide ions.

[tex][OH-] = 0.026 M[/tex]

The hydroxide ions will react with water to produce hydronium ions (H3O+), according to the equation:

[tex]OH- + H2O - > H3O+ + OH-[/tex]

The concentration of hydronium ions can be calculated using the equation:

[tex][H3O+] = Kw/[OH-] = 10^(-14)/[OH-] = 10^(-14)/0.026 = 10^(-13) M[/tex]

The pH of the solution can be calculated using the equation:

[tex]pH = -log[H3O+] = -log(10^(-13)) = 13.[/tex]

Therefore, the pH of the 0.026 M KOH solution is 12.97.

Learn more about KOH solution here:

https://brainly.com/question/29289679

#SPJ4

The substance with the most atoms per mole also has the most moles per mole. The Avogadro's number can be used to determine a substance's atom count.

12 grams of pure carbon-12 weigh exactly one mole, or 6.022 x 1023 atoms, making one mole equivalent to 12 grams of pure carbon-12. • Avogadro's Number is the quantity of particles included in one mole (6.0221421 x 1023).

This figure indicates how many atoms, molecules, and ions make up one mole of a given chemical. All you have to do is determine which chemical contains the most moles. This substance will also contain the most atoms overall.

To learn more about Avogadro's number here:

https://brainly.com/question/29341891

#SPJ4

The pH of a solution is determined by the concentration of hydrogen ions (H+) in the solutio The pH in beaker B is 6.45.

Concentration is the ability to focus and maintain attention on a task or thought for an extended period of time. It involves using mental effort to maintain focus and block out distractions. Concentration is important for studying, problem-solving, and other activities that require sustained attention. It can be trained and improved with practice. Strategies such as eliminating distractions, breaking tasks into smaller steps, and taking regular breaks can help to improve concentration.

In Beaker A, we can see that the concentration of H3O+ is greater than Beaker B, which indicates that Beaker A has a lower pH. Since the pH in Beaker A is 4.45, this implies that the pH in Beaker B must be higher. To calculate the exact pH of Beaker B, we would need to know the exact concentration of H3O+ in each beaker.

The pH of a solution is determined by the concentration of hydrogen ions (H+) in the solutio The pH in beaker B is 6.45.

To learn more about  concentration visit:

brainly.com/question/28564792

#SPJ4

The mass of the sample of oxygen gas is 115.2 x 10²³g.

The mass is the quantity of matter that an object has and is measured in kilograms (kg). It is an important physical property of objects and is related to the inertia of an object, which is the tendency of an object to resist changes in its motion. Mass is a scalar quantity, meaning it has only magnitude and no direction. Mass is also distinct from weight, which is a measure of the force of gravity on an object.

Mass = (Number of atoms) x (Atomic Mass of Oxygen)

In this case, the number of oxygen atoms is 7.2 x 10²³  and the atomic mass of oxygen is 16.0 g/mol.

Therefore, the mass of the sample of oxygen gas is:

Mass = (7.2 x 10²³  atoms) x (16.0 g/mol)

Mass = 115.2 x 10²³ g

To learn more about The mass

https://brainly.com/question/837939

#SPJ4

Examining the graph the missing parts are

21. pressure

22. Solid

23. condensation

24. gas

A phase diagram is a graphical representation of the conditions (temperature, pressure, and composition) under which different phases of a substance exist in thermodynamic equilibrium with each other. It is a powerful tool for understanding the behavior of a substance under varying conditions, and for predicting the conditions under which a particular phase of the substance will form or transform into another phase.

A typical phase diagram shows the boundary lines separating different phases, such as solid, liquid, and gas, and indicates the conditions under which each phase is stable.

The phase diagram can also indicate the conditions under which a substance will undergo a phase transition, such as melting or boiling, and the conditions under which the substance will be in a single phase, such as a supercritical fluid.

Learn more about phase diagram at:

https://brainly.com/question/28097253

#SPJ1

The empirical formula of the given compound is C₆H₁₀S₂O. The empirical mass and molecular mass is equal here. Hence, the molecular formula of allicin is the same.

The empirical formula of a compound is determined using the mass presents and number of moles of each element present in it.

Given, 44.4 % of C- 44.4 g of C contains = 44.4 g/12 g/mol= 3.7 moles.

number of moles of H = 6.21

number of moles of S = 39.5 g/32 g/mol = 1.23 moles

no.of moles of O = 9.86 g/16 g/mol = 0.61 moles.

Divide all of these number of moles by 0.61, we get the ratio and empirical formula as:

C₆H₁₀S₂O.

The formula mass = (6 ×12) + (10) + (2 × 32) + (16) = 162 g/mol.

Molecular mass = 162 g/mol.

Therefore, the molecular formula of the compound is the same C₆H₁₀S₂O.

Find more on empirical formula:

https://brainly.com/question/1247523

#SPJ1

We will produce 6 moles of magnesium oxide

a rough border Typically, the edges are jagged, scalloped, or fuzzy in appearance. The nearby skin may be covered by the pigment. erratic color: There could be shades of tan, brown, and black. It's also possible to have patches of white, black, red, pink, or blue color.

If we have 6 moles of magnesium, then we use the ratios from the balanced equation to find the moles of oxygen needed

MOLES O₂ = MOLES MG * (1 O₂ / 2 Mg) <--- we get this from equation

= 6 mol Mg * (1 O₂ / 2 Mg)

= 3 mol O₂

We need 3 moles of oxygen otherwise we will not have all 6 moles of magnesium react. This will product

MOLES MgO = MOLES MG * (2 MgO / 2 Mg)

                       = 6 mol Mg * (2 MgO / 2 Mg)

                       = 6 mol MgO

To know more about mole visit :-

brainly.com/question/10528918

#SPJ1

Answer: 0.00546(5) or 5.47 x 10^-3 (don't forget sig figs)

Explanation: A mole of He is 6.02 x 10^23 atoms. To the answer, you'll need to divide 3.28 x 10^21 by 6.20 x 10^23.

The more polar compound will bind to the plate. On the TLC plate, the lowest one binds more strongly, so methoxybenzyl alcohol will have a lower Rf value than methoxy benzaldehyde.

In chemistry, a compound is a substance made up of or greater different chemical elements combined in a fixed ratio. while the elements come collectively, they react with every other and shape chemical bonds which can be difficult to interrupt. those bonds form due to sharing or replacing electrons between atoms.

A chemical compound is a chemical substance composed of many equal molecules containing atoms from a couple of chemical elements held collectively by using chemical bonds. A molecule along with atoms of the most effective one detail is consequently not a compound. A compound is a material composed of or greater additives. Water, carbon dioxide, and desk salt are some examples of compounds.

To learn more about Compound visit here:

brainly.com/question/13516179

#SPJ4

Red light has a lower frequency and a longer wavelength than ultraviolet rays.

Red light is a type of electromagnetic radiation with a wavelength between 630 and 700 nanometers, and a frequency of about 480 to 430 terahertz. It is one of the colors of the visible spectrum and is known for its longer wavelength and lower frequency compared to other colors like blue or violet. Red light is used in a variety of applications, including in traffic lights, in phototherapy to treat skin conditions, and in night-vision devices to preserve night vision.

Ultraviolet (UV) light is a type of electromagnetic radiation with a wavelength shorter than that of visible light but longer than X-rays. It has a frequency range of about 10 to 400 terahertz, and its wavelength ranges from about 100 to 400 nanometers. UV light is divided into three categories: UVA, UVB, and UVC, with UVC having the shortest wavelength and highest frequency. Although UV light is invisible to the human eye, it can cause sunburn and other skin damage, and is also used in various applications such as water purification, air purification, and in black light to illuminate fluorescent materials.

Learn more about Red Light here

https://brainly.com/question/3387132

#SPJ4

To calculate the change in temperature of the cold water and the hot water is

ΔT = T (final) - T (initial)

To calculate the change in temperature you need to know the initial temperature of each water sample and the final temperature after they are mixed.

where ΔT represents the change in temperature, T final represents the final temperature, and T initial represents the initial temperature.

For example, if you have 50 grams of cold water at 10°C and 50 grams of hot water at 80°C, and after mixing, the final temperature is 60°C, then you can calculate the change in temperature for the cold water as follows:

ΔTcold water = T final - T initial cold water = 60°C - 10°C = 50°C

And for the hot water:

ΔT hot water = T final - T initial hot water = 60°C - 80°C = -20°C

the change in temperature of the cold water is positive, which means that its temperature has increased, while the change in temperature of the hot water is negative, which means that its temperature has decreased.

To learn more about Change in Temperature :

https://brainly.com/question/29867685

#SPJ4

Hydrogen is considered the limiting reactant in this reaction because it is present in a smaller amount compared to nitrogen.

The limiting reactant is the reactant that is completely consumed before the other reactant, and determines the amount of product that can be produced.

In a chemical reaction, the limiting reactant is the one that limits the amount of product that can be formed, because it is the one that is used up first. In this case, the reaction between 7.00 g of hydrogen and 70.0 g of nitrogen can only produce a certain amount of product based on the amount of hydrogen available. Once the hydrogen has reacted, no further reaction can occur.

It is important to identify the limiting reactant in a chemical reaction because it helps to determine the theoretical yield of the reaction, which is the maximum amount of product that can be produced. The theoretical yield can then be compared to the actual yield to evaluate the efficiency of the reaction.

To learn more about Limiting reactant :

https://brainly.com/question/11587316

#SPJ4

A precipitate occurs when a 29.3 ml sample of a 1.4 m potassium chloride solution and a 36.8 ml sample of a 1.06 m lead(ii) nitrate solution are combined. The solid is gathered, dried, and determined to weigh 2.00 g. 36.70% is the percent yield.

To calculate the percent yield of the reaction, we need to compare the actual yield with the theoretical yield, and express the result as a percentage.

According to the balanced equation, 2 moles of KCl react with 1 mole of Pb(NO3)2 to produce 1 mole of PbCl2. Therefore, the theoretical yield of PbCl2 is:0.0196 mol.

The molar mass of PbCl2 is 278.10 g/mol, so the theoretical mass of PbCl2 is:5.454

The actual yield of PbCl2 is given as 2.00 g. Therefore, the percent yield is:

percent yield = actual yield / theoretical yield x 100% = 2.00 g / 5.454 g x 100% = 36.70%

Rounding to two decimal places, the percent yield is 36.70%.

Learn more about Percent yield here:

https://brainly.com/question/12704041

#SPJ4

solids, phase of matter holds its shape, has definite volume and is rigid

One of the three fundamental states of matter, along with liquid and gas. (Ionized gases or plasmas are occasionally regarded as the fourth state of matter.) Because the energy of atoms lowers when they occupy a reasonably organised, three-dimensional structure, a solid develops from a liquid or gas. Solids differ from liquids and gases in that they have particular properties. For instance, all solids can withstand forces that are parallel or perpendicular to a surface (i.e., normal or shear loads, respectively). Those characteristics are influenced by the solid's constituent atoms' characteristics, their arrangement, and the forces that act between them.

Learn more about solids

brainly.com/question/17061172

#SPJ4

Here, the final volume can be determined using Boyle's law. The volume at 1013 mb pressure  is 8 L. Then the volume at  500 mb will be 16 L.

Boyle's law states that, at constant temperature, the volume of a gas is inversely  proportional to the pressure of the gas.

Hence, PV = a constant.

Let P1 and V1 be the initial pressure  and volume and P2 and V2  be the final pressure and volume then we can write it as,

P1 V1 = P2 V2.

Given that, P1 = 1013 mb

P2 = 500 mb

V1 = 8 l

V2 = P1 V1 / P2

V2  = 1013 mb  × 8 L /500 mb

     = 16 L.

Therefore, the volume of the gas at a pressure of 500 mb is 16 l.

Find more on Boyle's law:

brainly.com/question/1437490

#SPJ1

The Diffusion rate is fastest when the concentration gradient is higher.

The diffusion is defined  the movement of the molecules from the higher concentration to the lower concentration. It occurs because of the random movement of the molecules. The rate of the diffusion be affected by the concentration gradient, the temperature, and the surface area of the cell membrane.

The difference between the concentration of the substance in the two areas will forms the concentration gradient. The rate of the diffusion is directly proportional to the concentration gradient. The Higher the concentration gradient, the faster the rate of the diffusion.

To learn more about concentration gradient here

https://brainly.com/question/29310658

#SPJ4

Answer:

plants make their own food using the process of photosynthesis.  plants capture energy from sunlight  which they use to combine carbon dioxide and water.  the products include  glucose  which is food for the plant the other product is oxygen gas.

Explanation:

Hope this halps you !!!!!

Answer:

Hi there!

Plants make their own food using the process of photosynthesis.  

Plants capture energy from sunlight which they use to combine carbon dioxide and water.

The products include glucose  which is food for the plant the other product is oxygen gas.

The other product is oxygen.

Explanation:

Hope this helps!

Brainiest? Can you click on the crown on my answer? Thanks!

The element that is not one of the four elements that make up the vast majority (96%) of molecules in our body is gold. Option C is correct.

The four elements that make up the vast majority (96%) of molecules in our body are carbon, oxygen, hydrogen, and nitrogen. These elements form the building blocks for molecules such as carbohydrates, lipids, proteins, and nucleic acids, which are essential for life.

While gold is a chemical element and can be found in trace amounts in the human body, it is not one of the four elements that make up the majority of molecules in our body.

To know more about gold here

https://brainly.com/question/12322433

#SPJ4

--The given question is incomplete, the complete question is

"Which is not one of the four elements that make up the vast majority (96%) of molecules in our body? A) Carbon B) Oxygen C) Gold D) Hydrogen E) Nitrogen"--

The enthalpy of reaction for 2 NO(g) + O2(g) → N2O4(g) is ΔH = 57.9 kJ - (2.7 kJ + 55.2 kJ + 85.5 kJ - 171.0 kJ) = -115.5 kJ.

The reaction of 2 NO(g) + O2(g) → N2O4(g) is favored at high temperatures, due to the large negative enthalpy value.

This means that the reaction will proceed more quickly at higher temperatures, as the energy released from the reaction helps to increase the reaction rate. In addition, the reaction of 2 NO(g) + O2(g) → N2O4(g) is also favored at higher pressures, as the increased pressure helps to drive the reaction forward.

Learn more about The enthalpy:

https://brainly.com/question/25712824

#SPJ4

10_20 20_30 30_40 40_50 50_60

Convert the mass of anhydrate to moles: Mass of anhydrate / Molar mass anhydrate =120.4g / 120.4g/mol = 1 mole MgSO4.

One of a body's fundamental properties is its mass. In spite of having the same amount of matter in theory, different atoms and elementary particles have been found to have different masses.

In modern physics, there are a number of conceptually distinct but physically equivalent conceptions of mass. Experimentally, the body's resistance to acceleration (change in velocity) in the presence of a net force can be quantified as mass, which is the same as inertia. The mass of the object affects the gravitational pull it exerts on other bodies.

To know more about the mass, click the link given below:

https://brainly.com/question/19694949

#SPJ1

CaCl₂ 2H₂O  contains the greatest percent of water by mass  By halving the hydrate's formula , one may compute the theoretical (real) percent hydration.

To provide with enough liquid or moisture; to make to occupy or mix with water or indeed the constituents of water. softens and moisturizes the skin. the intransitive verb "to hydrate"

Milk is one of finest liquids for hydration, according to research, even more than water or caloric beverages. Researchers attribute milk's efficiency to its protein, carbs, and natural electrolytes.

To know more about hydrate visit :-

brainly.com/question/11202174

#SPJ1

A class of chemical compound known as an ionic compound is made up of positively charged ions (cations) and negatively charged ions (anions) that are held together by electrostatic forces or ionic bonds

Ionic compounds: what are they?

. Typically, the formation of these compounds involves the transfer of electrons from a metal to a non-metal, which produces positive and negative ions.

At room temperature, ionic compounds are typically solid because they have high melting and boiling points. Additionally, when melted or dissolved, they conduct electricity. Ionic compounds include things like calcium carbonate (CaCO3), magnesium oxide (MgO), and sodium chloride (NaCl).

a. Fluorine - Atomic element

b. N2O - Molecular compound

c. Silver - Atomic element

d. K2O - Ionic compound

e. Fe2O3 - Ionic compound

To know more about electrostatic forces, visit:

brainly.com/question/9774180

#SPJ4

Answer:

Reactive.

Explanation:

am sure bro..…….

Because it is too reactive, sodium metal cannot be used to make sodium chloride. Since sodium is a highly reactive alkali metal, it easily interacts with other substances to form new ones.

Sodium metal interacts fast with water to produce sodium hydroxide and hydrogen gas. The metal may catch fire and burn as a result of this reaction since it is so exothermic, or heat-producing.

Sodium metal interacts fast with acids like hydrochloric acid to produce sodium chloride and hydrogen gas. However, handling this reaction can be risky due to its high exothermic nature.

There is a significant safety risk since the heat from the reaction might cause the acid to boil and spray.Boil and spatter poses a major risk to people's safety. In comparison, using sodium hydroxide to create sodium chloride is significantly safer.

When sodium hydroxide and an acid are combined, the reaction is significantly slower and less exothermic. This response is considerably simpler to manage and does not provide a significant risk to safety. Sodium hydroxide is also considerably simpler to get than sodium metal. As a result, it is the technique of choice for producing sodium chloride.

Learn more about exothermic reactions at:

https://brainly.com/question/28546817

#SPJ2

The milligrams of the gas are formed if 10.0ml of 3.00% hydrogen peroxide solution decomposes, The density of the solution is 1.00 g/mL is 300 mg.

The equation is as follows :

2H₂O₂(l)   ---->   2H₂O(l)   +   O₂(g)

The density of the solution = 1 g/mL

The volume of the water = 100 mL

The volume of the H₂O₂ = 10 mL

The mass of the hydrogen peroxide = 3 g

2 moles of the hydrogen peroxide produces the 1 mole of the oxygen gas.

The mass of the O₂ =   (10 mL × 3 g of H₂O₂ ) / 100 mL

                                = 0.3 g = 300 mg

To learn more about density here

https://brainly.com/question/29102161

#SPJ4

Name and Title: Miles Junior

[Instructor's Name]: Tom Hales

[Date] - February, 7th , 2023.

Plate Tectonics Lab Report (see attached document)

Objective(s): The purpose of this lab was to investigate the interactions between continental and oceanic plates at convergent, divergent, and transform boundaries around the world and to record observations in the lab report.

At divergent plate boundaries, geological events such as earthquakes, faults, and ocean formation occur. At convergent plate boundaries, earthquakes, faults, mountains, and volcanoes occur. At transform plate boundaries, earthquakes and faults occur.

Through the years, these geological processes and interactions have changed the Earth's surface by creating new land, causing earthquakes, and creating new oceanic and continental crust. This lab showed that the interactions between plates at different boundaries have different outcomes and have a significant impact on the Earth's surface over time.

Learn more about Tectonics  plates at:

https://brainly.com/question/14307885

#SPJ1

The molecular formula of the compound is C₂H₂O.

The molecular formula of a compound can be determined by finding the ratio of the moles of each element in the compound, and then using that ratio to write the formula.

The number of moles of carbon can be found by dividing the mass of carbon by its molar mass:

n_C = 2.00 g / (12.01 g/mol) = 0.166 mol

The number of moles of hydrogen can be found by dividing the mass of hydrogen by its molar mass:

n_H = 0.34 g / (1.01 g/mol) = 0.338 mol

The number of moles of oxygen can be found by dividing the mass of oxygen by its molar mass:

n_O = 2.69 g / (16.00 g/mol) = 0.168 mol

Next, we need to find the ratio of moles of each element in the compound. To do this, we divide the number of moles of each element by the total number of moles:

n_C / (n_C + n_H + n_O) = 0.166 / (0.166 + 0.338 + 0.168) = 0.166 / 0.672 = 0.246

n_H / (n_C + n_H + n_O) = 0.338 / (0.166 + 0.338 + 0.168) = 0.338 / 0.672 = 0.500

n_O / (n_C + n_H + n_O) = 0.168 / (0.166 + 0.338 + 0.168) = 0.168 / 0.672 = 0.250

We use these ratios to write the molecular formula:

C_x H_y O_z where x = 0.246, y = 0.500, and z = 0.250

The molecular formula of the compound is then obtained by multiplying each ratio by the smallest whole number that results in integers for x, y, and z:

C_x H_y O_z = C_(0.246 × 2) H_(0.500 × 2) O_(0.250 × 2) = C_0.492 H_1.000 O_0.500

Therefore, the molecular formula of the compound is C₂H₂O.

To know more about molecular formula here

https://brainly.com/question/28647690

#SPJ4